Tegiwa Upaclick Splitter Diffuser Vents Honda Civic EP3 Type-R 01-06
A direct cut-and-fit cooling solution for EP3s running the Upaclick front splitter. Ducts air into the wheel well and onto the inside of the tyre to keep temps low and increase front end downforce. Engineered and 3D printed in-house with the help of our resident EP3 track specialist to maximise performance and keep optimal temperatures during long, demanding sessions.
Steve, one of our employees, saw a 2 second laptime improvement (1.46 > 1.44, Cadwell Park) even on older tyres, having installed these with a fresh set of pads. He experienced a notable difference in front end turn in through the higher speed corners, and massively reduced brake fade. Steve noted roughly 2mph reduction in top end down the straight, however was able to carry 3mph extra through the corners, reporting more confidence throughout the session, especially in the Turn 1 turn in (Coppice), which he now takes flat.
Key Features:
-
3D Printed In-House from PETG-CF: Crafted with high-quality carbon-enlaced material, this spacer offers durability and reliability.
-
Heat Resistant up to 73°C: Ensuring consistent performance even under demanding conditions.
-
Compatibility: Upaclick EP3 Splitter
-
Cooling: Channels route air to both the inside of the wheel well and the inside of the tyre, fixing two common issues for track EP3s.
Fitting:
- For best clearance, leave 100mm from the outer edge of the Upaclick. Simply measure and cut the Upaclick, and use any strong bonding element to glue to two together. We recommend Tiger Seal or Gorilla Glue.
- Make sure to mock up the ducts to your car before cutting - measure twice and cut once!
