RSE Full Titanium Exhaust Nissan Skyline GT-R R32
Real Speed Engineering's full titanium exhaust for the R32 GT-R uses a three-piece slip-joint construction with no flanges at the intermediate joints, the sections held instead by spring hooks and clamp bands. The pipework runs an uncompromising racing layout, kept as close to straight as possible from the main pipe through to the silencer for high efficiency and high output, and because the routing still follows the standard body design it remains suitable for street-driven cars.
Main pipe diameter is increased to 89.1mm from the standard 70mm with 1mm wall thickness, running into a 152mm titanium silencer and a 115mm titanium tip in place of a standard outlet that tapers from 92mm to 70mm. The complete exhaust weighs 7.4kg against the 19.5kg standard unit, a saving of over 12kg. A Sound Reducer ver.2 is included, adjustable across three stages.
Key Features
- Full titanium construction using RSE's own titanium material, 1mm wall thickness throughout
- 7.4kg against the 19.5kg standard exhaust, a saving of over 12kg
- 89.1mm main pipe diameter (standard 70mm)
- 152mm titanium silencer
- Single 115mm titanium exhaust tip (standard 92mm tapering to 70mm)
- 8mm thick flanges
- Three-piece slip-joint construction with no flanges at the intermediate joints, secured with spring hooks and clamp bands
- Near-straight racing pipe layout, still following the standard body routing so it suits street use
- Complete kit including main pipes, silencer assembly, gasket, clamp bands, springs, silencer band and rubber, fixings and Sound Reducer ver.2
Please Note
- The Sound Reducer ver.2 adjusts volume across three stages; additional modification is required to use MODE2
Compatible With
- Nissan Skyline GT-R R32 (RB26DETT)
This product is intended for motorsport/competition use and should NOT be used on public roads.
Do not drive at high speeds with the SOUND REDUCER installed as it may become damaged or broken.
