RSE Full Titanium Exhaust Hyundai Genesis Coupe 2.0T
Real Speed Engineering's full titanium exhaust for the Genesis Coupe 2.0T converts the car to a single exit, leaving one side of the standard twin-exit arrangement redundant. RSE offer a carbon rear bumper cover, part number RE301A-HY01A, to close off the unused side.
Pipe diameter is increased to 80mm from the standard 60.5mm with 1mm wall thickness, feeding a 152mm titanium silencer and a 115mm titanium tip. The complete exhaust weighs 4.7kg against the 19.6kg standard unit, a saving of 14.9kg, so it comes in at under a quarter of the standard weight. The racing layout keeps curves and bends to an absolute minimum for maximum exhaust efficiency, and a three-piece construction dispenses with flanges altogether, using springs and clamp bands instead to save weight and give a proper race finish.
Key Features
- Full titanium construction with 1mm wall thickness (standard 1.2mm)
- 4.7kg against the 19.6kg standard exhaust, a saving of 14.9kg
- 80mm pipe diameter (standard 60.5mm)
- 152mm titanium silencer
- 115mm titanium exhaust tip
- 6mm thick flanges (standard 9mm)
- Three-piece flangeless construction secured with springs and clamp bands
- Racing pipe layout for maximum exhaust efficiency
- Dyno tested by RSE against the standard system
- Complete kit including gaskets, fixings and anti-seize compound
Please Note
- Fits the 2.0T only. Not compatible with the 380GT
- If fitting a Sound Reducer ver.2, an additional bolt hole may be required
- Converting to a single exit leaves one side of the rear bumper open.
Compatible With
- Hyundai Genesis Coupe 2.0T (G4KF)
This product is intended for motorsport/competition use and should NOT be used on public roads.
Do not drive at high speeds with the SOUND REDUCER installedas it may become damaged or broken.
