This kit is available to operate with the AIM Motorsport MXL Strada Digital Dash Display. It includes the basic sensors and wiring harness required to add analogue channels (1-8), a conventional RPM signal (when not taking this data directly from the ECU connection), a speed sensor and a M5 water temperature sensor - providing a quick, neat and simple installation solution.
This complete harness includes 2 connectors housed within one weather-resistant boot - the extra 16 pin AMP connector and the standard 12 pin AMP connector, providing a neat and tidy connection into the back of the dash.
To extend the cable length to the sensor, please order the optional 719-719 Extension Lead (various lengths available) to best suit your application.
This kit is available to operate with the AIM Motorsport MXL Strada Digital Dash Display. It includes the basic sensors and wiring harness required to add analogue channels (1-8), a conventional RPM signal (when not taking this data directly from the ECU connection), a speed sensor and a M5 water temperature sensor - providing a quick, neat and simple installation solution.
This complete harness includes 2 connectors housed within one weather-resistant boot - the extra 16 pin AMP connector and the standard 12 pin AMP connector, providing a neat and tidy connection into the back of the dash.
To extend the cable length to the sensor, please order the optional 719-719 Extension Lead (various lengths available) to best suit your application.
Aim MXL Strada Loom Power - Can Only. Aim Looms and Harnesses are engineered and designed to withstand the rigours of the Motorsport environment.
USB download lead to connect a MXL Dash to a PC. Enables data to be down-loaded onto the PC and analysed with the powerful and professional Race Studio software.
USB download lead to connect a MXL Dash to a PC. Enables data to be down-loaded onto the PC and analysed with the powerful and professional Race Studio software.
USB download lead to connect a MXL Dash to a PC. Enables data to be down-loaded onto the PC and analysed with the powerful and professional Race Studio software.
The AiM spark RPM adapter has been designed for installation on single cylinder 2 or 4-stroke engines. It is a filter that converts the RPM signal sampled by induction from the spark plug into a square wave signal. The image below shows the signal sampled by induction on the left and the square wave signal on the right.
The AiM RPM - ECU coil adapter is a filter that allows you to sample the RPM signal from the coil and the ECU, avoiding possible signal instabilities or wrong sampling due to electrical interferences that lead to voltage peaks or to an RPM signal whose square wave is not perfect. The AiM adapter cleans the signal from undesired peaks and squares the signal waveform.
The adapter is helpful for ECU without CAN output.
The AiM 12 AMP plug & pins are ideal if you need a replacement or keep them as spares.
The AiM 16 AMP plug & pins are ideal if you need a replacement or keep them as spares.
These looms and connectors for the MXL dash are the perfect accessory to turn your display into exactly what you want.