{"product_id":"rse-full-titanium-exhaust-subaru-wrx-s4-vbh","title":"RSE Full Titanium Exhaust Subaru WRX S4 VBH","description":"\u003ch2\u003eRSE Full Titanium Exhaust Subaru WRX S4 VBH\u003c\/h2\u003e\n\u003cp\u003eThe standard exhaust on the VB WRX runs four 80mm exits fed by three separate boxes, a 480 by 220 by 110mm sub silencer and a pair of 350 by 300 by 230mm silencers, and weighs 21.8kg all in. Real Speed Engineering replace the lot with titanium at 1mm wall thickness and 8mm flanges, opening main pipe diameter up to 80.5mm from the standard 60mm and exiting through 115mm titanium tips. It's supplied as a complete kit with the gaskets, bolts and anti-seize compound needed for fitting, so there's no need to source any standard parts before installation. It's available in two exit configurations.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKey Features\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFull titanium construction with 1mm wall thickness throughout\u003c\/li\u003e\n\u003cli\u003e80.5mm main pipe diameter (standard 60mm)\u003c\/li\u003e\n\u003cli\u003e8mm thick flanges\u003c\/li\u003e\n\u003cli\u003e115mm titanium exhaust tips (standard four 80mm)\u003c\/li\u003e\n\u003cli\u003eChoice of single-exit or dual-exit configuration\u003c\/li\u003e\n\u003cli\u003eComplete kit including gaskets, fixings and anti-seize compound\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePlease Note\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSound levels are RSE's own reference figures, measured at 3,800rpm. RSE note that the standard measurement engine speed could not be reached, so these were taken at 3,800rpm instead\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eCompatible With\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSubaru WRX VB, 2022 onwards (FA24DIT)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eRSE Full Titanium Exhaust Nissan Skyline GT-R R33\u003c\/h2\u003e\n\u003cp\u003eReal Speed Engineering's full titanium exhaust for the R33 GT-R uses a three-piece slip-in construction with no flanges at the intermediate joints, the sections held instead by spring hooks and clamp bands. The pipework runs an uncompromising racing layout, kept as close to straight as possible from the main pipe through to the silencer for high efficiency and high output, and because the routing still follows the standard body design it remains suitable for street-driven cars.\u003c\/p\u003e\n\u003cp\u003eMain pipe diameter is opened up to 89.1mm from the standard 68 to 63.5mm pipework with 1mm wall thickness against the standard 1.5mm, and the standard twin exits of 80 to 72mm are replaced by a single 115mm titanium tailpipe. The complete exhaust weighs 7.2kg against the 18.9kg standard unit, a saving of 11.7kg. A Sound Reducer ver.2 is included, adjustable across three stages.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKey Features\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFull titanium construction using RSE's own titanium material, 1mm wall thickness throughout (standard 1.5mm)\u003c\/li\u003e\n\u003cli\u003e7.2kg against the 18.9kg standard exhaust, a saving of 11.7kg\u003c\/li\u003e\n\u003cli\u003e89.1mm main pipe diameter (standard 68 to 63.5mm)\u003c\/li\u003e\n\u003cli\u003e152mm titanium silencer with 1mm board thickness\u003c\/li\u003e\n\u003cli\u003eSingle 115mm titanium exhaust tip (standard twin 80 to 72mm)\u003c\/li\u003e\n\u003cli\u003e8mm thick flanges\u003c\/li\u003e\n\u003cli\u003eThree-piece slip-in construction with no flanges at the intermediate joints, secured with spring hooks and clamp bands\u003c\/li\u003e\n\u003cli\u003eNear-straight racing pipe layout, still following the standard body routing so it suits street use\u003c\/li\u003e\n\u003cli\u003eComplete kit including main pipes A and B, silencer assembly, gasket, clamp bands, springs, silencer band and rubber, fixings and Sound Reducer ver.2\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePlease Note\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThe Sound Reducer ver.2 adjusts volume across three stages; additional modification is required to use MODE2\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eCompatible With\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eNissan Skyline GT-R R33 (RB26DETT)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eThis product is intended for motorsport\/competition use and should NOT be used on public roads.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDo not drive at high speeds with the SOUND REDUCER installed as it may become damaged or broken.\u003cbr\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"RSE","offers":[{"title":"Type-R (Single)","offer_id":58628096754045,"sku":"RB6090-SB06A","price":1244.06,"currency_code":"GBP","in_stock":true},{"title":"Type-D (Dual)","offer_id":58628096786813,"sku":"RB6090-SB06B","price":1700.67,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/5767\/7352\/files\/S4_type-r_layout_1920_1.jpg?v=1788424779","url":"https:\/\/www.tegiwa.com\/products\/rse-full-titanium-exhaust-subaru-wrx-s4-vbh","provider":"Tegiwa","version":"1.0","type":"link"}