{"title":"Toyota GR Corolla Gearbox, Differential, Clutch, Flywheel \u0026 Drivetrain Upgrades","description":null,"products":[{"product_id":"eventuri-carbon-fibre-intake-toyota-gr-corolla-g16e-gts","title":"Eventuri Carbon Fibre Intake Toyota GR Corolla G16E-GTS","description":"\u003ch4\u003eTOYOTA GR YARIS\u003c\/h4\u003e\n\u003cp\u003e\u003cstrong\u003ePerformance Increase : 15hp, 18ft-lb\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e*Images show our optional carbon engine cover.\u003c\/p\u003e\n\u003cp\u003eThe GR Yaris Intake has been developed through extensive data logging of temperatures, flow rates and dyno testing. Since this is a turbocharged engine, heat and volume were the main considerations during development. This intake system has been developed to offer the highest possible flow rate whilst maintaining the lowest intake temperatures possible. Each component has been designed to provide the turbo with a smooth and free flowing path. By ensuring a sealed system we have improved on the IAT’s of the OEM airbox whilst at the same time increasing the internal volume to reduce the pressure drop and therefore reduce pumping losses of the turbo. In doing so the turbo is able to operate more efficiently and therefore reaches peak boost sooner to produce a net performance gain.\u003c\/p\u003e\n\u003cp\u003eThe filter itself has an outer diameter of 210mm or 8.3″ with a filtration surface area of over 130,000mm^2. The patented Venturi housing has been designed to provide the maximum internal volume possible for the GR Yaris and provides laminar flow to the turbo tube.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThe Eventuri Difference\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe GR Yaris Eventuri system uses our Patented Carbon fiber Housing which provides an aerodynamically efficient airflow path from the filter to the turbo. Not just another cone filter with a heat shield but a unique design which invokes the Venturi affect and maintains laminar flow conditions to reduce the drag on the turbo. You can read more about the housing design and how it works \u003ca href=\"http:\/\/www.eventuri.net\/technology\/\"\u003eHERE\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDyno Testing\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eOur GR Yaris intake has been tested by various reputable tuners globally who have all reported similar results. The first dyno chart is from RaceCal in the UK. Several runs were done with the OEM airbox to get a repeatable result and then again with the Eventuri intake. Tests were done on the same day back to back with the hood closed. Results show an increase in torque and power across the entire RPM range - not just at the peak RPM, which is why the car feels more responsive and is able to accelerate faster through the gears. The ambient temperatures during this session were 11.9 Deg C for the OEM airbox and 15.6 Deg C for the Eventuri - the rise in temperature was due to the dyno cell warming up after the stock airbox runs.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDyno Results Summary:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cimg src=\"https:\/\/live.staticflickr.com\/65535\/51158528982_93b21f8c18_b.jpg\" alt=\"\"\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eThe second set of results are from Master Tuning Asia based in Hong Kong who tested the intake against the stock airbox on the same day and this time in warmer conditions of around 32 Deg C. The systems were tested 3 times and all 3 graphs show gains across the RPM range with the third run showing the highest gain as the stock airbox struggled with the IAT.\u003cbr\u003e\u003cbr\u003e\u003cimg src=\"https:\/\/live.staticflickr.com\/65535\/51159240301_33aa436539_b.jpg\" alt=\"\"\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cimg src=\"https:\/\/live.staticflickr.com\/65535\/51160026799_5750a30ee3_b.jpg\" alt=\"\"\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cimg src=\"https:\/\/live.staticflickr.com\/65535\/51160026844_8fd30f0ac9_b.jpg\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePart Numbers:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eEVE-GR4-CF-INT\u003c\/strong\u003e : Toyota GR Yaris Intake Gloss Carbon\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEVE-GR4-CFM-INT\u003c\/strong\u003e : Toyota GR Yaris Intake Matte Carbon\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/live.staticflickr.com\/65535\/51155651282_2268a8b0c5_b.jpg\" alt=\"\"\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eThe Eventuri GR Yaris intake system consists of a number of components engineered to perform a specific purpose and fabricated to the highest of standards. We use 100% pre-preg carbon fiber with no fibreglass which means we can achieve a smooth internal surface to maintain smoother airflow. Here are the details for each component and the design ethos behind them:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eEach intake system consists of:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCarbon Fiber Patented Venturi Filter Housing with integrated MAF section\u003c\/li\u003e\n\u003cli\u003eBespoke High Flow Dry Cone Filter\u003c\/li\u003e\n\u003cli\u003eCarbon Fiber Inlet Duct\u003c\/li\u003e\n\u003cli\u003eRear Tube Manufactured To OEM Specifications\u003c\/li\u003e\n\u003cli\u003eCustom Made Hardware\u003c\/li\u003e\n\u003cli\u003eLaser Cut Stainless Steel Brackets\u003c\/li\u003e\n\u003cli\u003eCustom EPDM Hose\u003c\/li\u003e\n\u003cli\u003eCNC Machined MAF Boss and Bracket Mounts\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003cbr\u003e\u003ciframe src=\"https:\/\/gifs.com\/embed\/r2Zl1k?watermark=false\u0026amp;uid=517317\u0026amp;token=01%2BMDEEO3Fno54mzwRFP7ShRspwzCZcz0TqbsFZ%2BxfM%3D\" width=\"1024px\" height=\"576px\" frameborder=\"0\" scrolling=\"no\" data-mce-fragment=\"1\"\u003e\u003c\/iframe\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFILTER HOUSING ASSEMBLY\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cimg src=\"https:\/\/live.staticflickr.com\/65535\/51218742076_1b9c6bed9d_b.jpg\" alt=\"\"\u003e\u003cbr\u003e\u003cbr\u003eThe filter housing comprises of our bespoke generation 2 filter, aluminium inlet cowl, stainless steel bracket and the integrated MAF section. The carbon pod shrouds the reverse mounted filter and smoothly shapes the airflow down to the MAF section which then connects to the rear inlet tube. This changes the flow path from the OEM airbox where airflow enters the front of the airbox, changes direction by 90 degrees to travel through the panel filter and then changes direction again by 90 degrees to move through the MAF section. Our system is a lot more direct with airflow entering the front of the filter housing and and moving into the MAF section without any abrupt direction changes. The result is a smoother path from the filter to the turbo inlet tube and therefore the turbo is able to function with less drag.\u003cbr\u003e\u003cbr\u003e\u003cimg src=\"https:\/\/live.staticflickr.com\/65535\/51218958738_9ba400ddb5_b.jpg\" alt=\"\"\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eBESPOKE CONE FILTER\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eIn order to achieve the highest flow rate possible we used our largest filter which has an outside diameter of 210mm or 8.3\" and when flow tested with a housing using a 4\" opening is able to flow up to 940 CFM at 28\" H2O. The filter medium is ISO tested to ensure that filtration is in line with OEM standards and is also dry. The filter is constructed with our signature flow cones to aid in the Venturi housing principle.\u003cbr\u003e\u003cbr\u003e\u003cimg src=\"https:\/\/live.staticflickr.com\/65535\/48992443212_73344eaa95_b.jpg\" alt=\"\"\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003ePATENTED TECHNOLOGY\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eOur patented filter housing has a smooth reduction in cross sectional area as it shrouds the filter and tapers down to the tubing. This geometry invokes the Venturi effect where the airflow accelerates whilst maintaining laminar conditions. It can be thought of as a large velocity stack - below is a diagram to show the comparison between our patented design and a regular intake system. Our bespoke filters aid the airflow moving through the housings and allow for an even velocity profile as the airflow exits the housings. Further details can be read in the Technology and Filters pages.\u003cbr\u003e\u003cbr\u003e\u003cimg src=\"https:\/\/farm5.staticflickr.com\/4832\/31975515988_d7679dbff3_b.jpg\" alt=\"\"\u003e\u003cbr\u003e\u003cbr\u003e\u003ca href=\"https:\/\/imgflip.com\/gif\/2gt5e6\"\u003e\u003cimg title=\"made at imgflip.com\" src=\"https:\/\/i.imgflip.com\/2gt5e6.gif\"\u003e\u003c\/a\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eCARBON DUCT\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cimg src=\"https:\/\/live.staticflickr.com\/65535\/51218955438_91f2ae9b28_b.jpg\" alt=\"\"\u003e\u003cbr\u003e\u003cbr\u003eThe duct feeds the filter housing with ambient airflow from the front bumper\/grill section. We maintained as large a volume as possible all the way to the front of the engine bay and derestricted the front of the duct by creating an opening just behind the bumper where the bonnet would close. This area of the engine bay stays at ambient temperatures while the car is in motion and so the intake is able to draw in air without being restricted to the small opening behind the grill. We did not extend the duct to the other side of the engine bay to use the second opening in the grill simply because of the abrupt flow angle and the restriction in space between the engine and the bonnet catch. Furthermore, using the second opening would stop cold air from entering the engine bay to assist with reducing overall heat soak. Finally the duct seals against the filter housing with an expanding rubber seal which allows for movement of the filter housing with the engine without letting hot air in.\u003cbr\u003e\u003cbr\u003e\u003cimg src=\"https:\/\/live.staticflickr.com\/65535\/51218957523_8afb28c9f6_b.jpg\" alt=\"\"\u003e\u003cbr\u003e\u003cbr\u003e\u003cimg src=\"https:\/\/live.staticflickr.com\/65535\/51218030462_e8915c5402_b.jpg\" alt=\"\"\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eREAR TUBE AND EPDM COUPLER\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cimg src=\"https:\/\/live.staticflickr.com\/65535\/51219814315_1147af27b3_b.jpg\" alt=\"\"\u003e\u003cbr\u003e\u003cbr\u003eThe final components in the system are the rear inlet tube and the EPDM coupler. The OEM rear tube has a sharp internal bend radius and at high flow rates, this can cause unwanted turbulence which can affect the efficiency of the turbo. We redesigned the rear tube to allow for a smoother bend which also allowed for a more optimum positioning of the filter housing. In order to cope with the heat at the back of the engine, this tube is made from a thermoplastic with glass fiber reinforcement. There is also a CNC machined reinforcement ring at the rear connection where the clamp would be secured. This prevents distortion under heavy clamping pressure - as used in the OEM tube as well. The connection between this tube and the filter housing is achieved with a custom made EPDM coupler which allows for vibrations and movement of the engine.\u003cbr\u003e\u003cbr\u003e\u003cimg src=\"https:\/\/live.staticflickr.com\/65535\/51159481948_cc43194bc4_b.jpg\" alt=\"\"\u003e\u003cbr\u003e\u003cbr\u003e\u003cimg src=\"https:\/\/live.staticflickr.com\/65535\/51218741286_4088826952_b.jpg\" alt=\"\"\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cimg src=\"https:\/\/live.staticflickr.com\/65535\/51155651282_2268a8b0c5_b.jpg\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Eventuri","offers":[{"title":"Gloss","offer_id":47195140358440,"sku":"EVE-GR4CR-CF-INT","price":1488.0,"currency_code":"GBP","in_stock":true},{"title":"Matte","offer_id":47195140391208,"sku":"EVE-GR4CR-CFM-INT","price":1488.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/5767\/7352\/files\/eventuri-carbon-fibre-intake-toyota-gr-corolla-g16e-gts-gloss-induction-kit-airbox-340.webp?v=1745076530"},{"product_id":"mishimoto-license-plate-relocation-kit-toyota-gr-corolla-23","title":"Mishimoto License Plate Relocation Kit Toyota GR Corolla 23+","description":"\u003cp\u003eFront license plates are a drag, literally. In the case of the 2023+ Toyota GR Corolla, the front license plate is installed directly in the center of the front grille. It creates wind resistance and blocks critical airflow to your radiator. With the Mishimoto License Plate Relocation Kit, we solve all these problems.----Designed specifically for the 2023+ Toyota GR Corolla, our License Plate Relocation Kit is fabricated from high-strength, anodized and powder-coated 6061-aluminum. Mounting to the OEM tow hook location allows for a direct fit while hugging the contours of your bumper for a clean, seamless installation. Additionally, moving the plate to the side and angling to follow the body lines helps reduce wind resistance and free up space in the center to allow critical airflow to reach your radiator. And, let's be honest, it just looks better! Our License Plate Relocation Kit includes all necessary hardware for an easy installation, and as with all our products, this kit includes our signature Mishimoto Lifetime Warranty.\u003c\/p\u003e","brand":"Mishimoto","offers":[{"title":"Default Title","offer_id":47317129724200,"sku":"MMLP-GRC-23","price":92.36,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/5767\/7352\/files\/mishimoto-license-plate-relocation-kit-toyota-gr-corolla-23-plates-frames-848.webp?v=1745108665"},{"product_id":"mishimoto-oil-cooler-kit-toyota-gr-corolla-23","title":"Mishimoto Oil Cooler Kit Toyota GR Corolla 23+","description":"\u003cp\u003eThe 2023+ Toyota GR Corolla is a track weapon for the modern world. Combining the practicality of a hatchback, the fuel efficiency of a 3-cylinder 1.6L engine, and 300 horsepower, the GR Corolla can do it all. Toyota's Gazoo Racing department didn't hold back when they designed the GR Corolla, but they did leave a little room for improvement.----Any time you're pushing 100 HP per cylinder, the engine is going to be producing a lot of heat. For the GR Corolla, that heat rears its head in the form of high oil temperatures. The fast spinning turbo and high 10.5:1 compression ratio means the oiling system is doing a lot of heavy lifting, and that results in oil temps soaring over 260 degrees for some. To help cool the GRC's spunky engine, Mishimoto has developed a performance oil cooler kit fit for the Gazoo Racing spirit.----Our 2023+ GR Corolla oil cooler kit includes everything you need to get your GRC's oil temps under control. This kit mounts our 14-row dual-pass bar-and-plate oil cooler in the upper grille using direct-fit brackets. This allows more airflow to the cooler and provides a dyno-proven 13-degree average reduction in oil temps. This kit also adds 0.76 quarts of oil to the system, so you can stay on the throttle longer without driving up your oil temps. We've included pre-assembled black nylon-sheathed -10AN braided stainless-steel lines to make installation easy and provide ample flow to critical engine components. The Mishimoto GR Corolla performance oil cooler kit is available with a thermostatic oil filter sandwich plate for daily drivers or cold climates, or with a non-thermostatic sandwich plate for dedicated track cars or those in hot environments. Like all Mishimoto products, this oil cooler kit is backed by our Mishimoto Lifetime Warranty so you can pin the throttle with confidence knowing we have your GR Corolla's back.\u003c\/p\u003e","brand":"Mishimoto","offers":[{"title":"Non-Thermostatic \/ Black Cooler","offer_id":47317138080040,"sku":"MMOC-GRC-23NTBK","price":774.84,"currency_code":"GBP","in_stock":true},{"title":"Thermostatic \/ Black Cooler","offer_id":47317138112808,"sku":"MMOC-GRC-23TBK","price":837.99,"currency_code":"GBP","in_stock":true},{"title":"Thermostatic \/ Silver Cooler","offer_id":47317138145576,"sku":"MMOC-GRC-23TSL","price":837.71,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/5767\/7352\/files\/mishimoto-oil-cooler-kit-toyota-gr-corolla-23-non-thermostatic-black-coolers-854.webp?v=1745113052"},{"product_id":"mishimoto-racing-tow-hook-toyota-gr-corolla-23","title":"Mishimoto Racing Tow Hook Toyota GR Corolla 23+","description":"\u003cp\u003eRacing is what the 2023+ GR Corolla was built for. And any racer knows that, sometimes, you need a little help out of the turn 2 sand trap. The stock GRC tow hook is sufficient, but it's not the most aesthetic piece to be leaving on your bumper. That means you have to go digging through your trunk when you need it and hope you didn't leave it back at the paddock with the rest of your stuff. With Mishimoto's racing tow hook for the 2023+ Toyota GR Corolla, however, you get the function without the embarrassment of having a grungy stock tow hook sticking out of your bumper all the time.---- Designed with both function and style in mind, the Mishimoto Racing Tow Hook for the 2023+ Toyota GR Corolla is constructed from high-strength 7075 aluminum and 304 stainless-steel. Available in 5 vibrant color options, and powder coated for maximum durability, there is an option to match everyone's style. With function being a major focus of the design, we opted for a 2-inch inside diameter fold-down ring design and a straight-pull strength rating of 8,000-pounds, allowing it to meet or exceed requirements for racing series such as SCCA, NASA, and CCA. We even include tow hook indication arrow stickers! Whether you're building your 2023+ GR Corolla for street, show, drag racing, auto-x, or road racing, a quality, functional, and stylish tow hook is a must-have! As with all our products, the Mishimoto Racing Tow Hook is backed by our Mishimoto Lifetime Warranty.\u003c\/p\u003e","brand":"Mishimoto","offers":[{"title":"Black","offer_id":47317204205864,"sku":"MMTH-GRC-23BK","price":179.0,"currency_code":"GBP","in_stock":true},{"title":"Blue","offer_id":47317204238632,"sku":"MMTH-GRC-23BL","price":178.86,"currency_code":"GBP","in_stock":true},{"title":"Gold","offer_id":47317204271400,"sku":"MMTH-GRC-23GD","price":178.86,"currency_code":"GBP","in_stock":true},{"title":"Polished","offer_id":47317204304168,"sku":"MMTH-GRC-23P","price":178.86,"currency_code":"GBP","in_stock":true},{"title":"Red","offer_id":47317204336936,"sku":"MMTH-GRC-23RD","price":178.88,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/5767\/7352\/files\/mishimoto-racing-tow-hook-toyota-gr-corolla-23-black-589.webp?v=1745114998"},{"product_id":"maxton-design-central-rear-splitter-flaps-toyota-corolla-gr-sport-hatchback-xii-2019","title":"Maxton Design Central Rear Splitter +flaps Toyota Corolla GR Sport Hatchback XII 2019-","description":"\u003cp\u003e\u003cspan\u003eCENTRAL REAR SPLITTER (+FLAPS) TOYOTA COROLLA GR SPORT HATCHBACK XII (2019-)\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cu\u003e\u003cspan\u003e\u003cspan\u003eFits only:\u003c\/span\u003e\u003c\/span\u003e\u003c\/u\u003e \u003cbr\u003eTOYOTA COROLLA GR SPORT HATCHBACK XII (2019-)\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan\u003e\u003cu\u003e\u003cspan\u003e\u003cbr\u003e\u003cspan\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/u\u003e\u003c\/span\u003e\u003cspan\u003e\u003cu\u003eCOMPLETE SET CONTAINS:\u003c\/u\u003e\u003c\/span\u003e\u003cbr\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan\u003e-\u0026gt; \u003c\/span\u003e\u003cspan\u003eCentral Rear Splitter\u003c\/span\u003e\u003cspan\u003e\u003cbr\u003e -\u0026gt; Mounting Kit\u003cbr\u003e -\u0026gt; Mounting Manual\u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan\u003e-\u0026gt; \u003c\/span\u003e\u003cspan\u003eFlaps in black matte colour(Racing Durability)\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003ca\u003e\u003cspan\u003eFitting manual: \u003c\/span\u003e\u003c\/a\u003e\u003ca\u003ehttps:\/\/www.maxtondesign.co.uk\/pdf\/rear-center-splitter_fitting-manual-maxton.pdf\u003c\/a\u003e\u003cbr\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan\u003e\u003c\/span\u003e\u003cspan\u003e\u003cspan\u003ePlease note, the majority of our products are made from ABS plastic, the flexibility of these products provides them the ability to withstand some pressure.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e\u003c\/span\u003e\u003cspan\u003e\u003cspan\u003eWe highly recommend installations are completed by a professional to ensure the product is fitted correctly and according to our fitting manuals.\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003eWe can only accept a return within 30 days of delivery, if the product is in its original condition including protective film still on. A refund will be processed excluding shipping costs.\u003cbr\u003e\u003cspan\u003e\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eAll products arrive with a protective film, this is a very thin plastic vacuum sealed around the product to avoid the item sustaining any damage. Once removed you will notice the product does not have any scuffs or scratches. \u003c\/span\u003e\u003c\/p\u003e","brand":"Maxton Design","offers":[{"title":"Default Title","offer_id":47326841372968,"sku":"MXT-TO-CO-12-HB-GR-RD1G+RSF","price":174.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/5767\/7352\/files\/maxton-design-central-rear-splitter-flaps-toyota-corolla-gr-sport-hatchback-xii-2019-splitters-skirts-diffusers-124.webp?v=1745022157"},{"product_id":"maxton-design-front-splitter-toyota-corolla-gr-sport-hatchback-xii-2019","title":"Maxton Design Front Splitter Toyota Corolla GR Sport Hatchback XII 2019-","description":"\u003cp\u003e\u003cspan\u003eFRONT SPLITTER TOYOTA COROLLA GR SPORT HATCHBACK XII (2019-)\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cu\u003e\u003cspan\u003e\u003cspan\u003eFits only:\u003c\/span\u003e\u003c\/span\u003e\u003c\/u\u003e \u003cbr\u003eTOYOTA COROLLA GR SPORT HATCHBACK XII (2019-)\u003cbr\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan\u003e\u003cu\u003e\u003cspan\u003e\u003cbr\u003e\u003cspan\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/u\u003e\u003c\/span\u003e\u003cspan\u003e\u003cu\u003eCOMPLETE SET CONTAINS:\u003c\/u\u003e\u003c\/span\u003e\u003cbr\u003e-\u0026gt; Splitter\/Front Bumper Lip Spoiler\u003cbr\u003e-\u0026gt; Mounting Kit\u003cbr\u003e-\u0026gt; Mounting Manual\u003cbr\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan\u003eFitting manual: \u003c\/span\u003e\u003ca\u003ehttps:\/\/www.maxtondesign.co.uk\/pdf\/splitter_fitting-manual-maxton.pdf\u003c\/a\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan\u003e\u003c\/span\u003e\u003cspan\u003e\u003cspan\u003ePlease note, the majority of our products are made from ABS plastic, the flexibility of these products provides them the ability to withstand some pressure.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e\u003c\/span\u003e\u003cspan\u003e\u003cspan\u003eWe highly recommend installations are completed by a professional to ensure the product is fitted correctly and according to our fitting manuals.\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003eWe can only accept a return within 30 days of delivery, if the product is in its original condition including protective film still on. A refund will be processed excluding shipping costs.\u003cbr\u003e\u003cspan\u003e\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eAll products arrive with a protective film, this is a very thin plastic vacuum sealed around the product to avoid the item sustaining any damage. Once removed you will notice the product does not have any scuffs or scratches. \u003c\/span\u003e\u003c\/p\u003e","brand":"Maxton Design","offers":[{"title":"Default Title","offer_id":47326841405736,"sku":"MXT-TO-CO-12-HB-GR-FD1G","price":174.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/5767\/7352\/files\/maxton-design-front-splitter-toyota-corolla-gr-sport-hatchback-xii-2019-splitters-skirts-diffusers-918.webp?v=1745022527"},{"product_id":"maxton-design-side-skirts-diffusers-toyota-corolla-gr-sport-hatchback-xii-2019","title":"Maxton Design Side Skirts Diffusers Toyota Corolla GR Sport Hatchback XII 2019-","description":"\u003cp\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan\u003eSIDE SKIRTS DIFFUSERS TOYOTA COROLLA GR SPORT HATCHBACK XII (2019-)\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cu\u003e\u003cspan\u003eFits Only:\u003c\/span\u003e\u003c\/u\u003e\u003cspan\u003e\u003cspan\u003e \u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eTOYOTA COROLLA GR SPORT HATCHBACK XII (2019-)\u003c\/span\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cu\u003e\u003cspan\u003e\u003cspan\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/u\u003e\u003cu\u003e\u003cspan\u003eCOMPLETE SET CONTAINS\u003c\/span\u003e\u003cspan\u003e:\u003c\/span\u003e\u003c\/u\u003e\u003cbr\u003e\u003cspan\u003e-\u0026gt; Side Skirt Splitters\u003cbr\u003e-\u0026gt; Mounting Kit\u003cbr\u003e-\u0026gt; Mounting Manual\u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan\u003eFitting manual: \u003c\/span\u003e\u003ca\u003e\u003cspan\u003ehttps:\/\/www.maxtondesign.co.uk\/pdf\/side-skirts-diffusers_fitting-manual-maxton.pdf\u003c\/span\u003e\u003c\/a\u003e\u003ca\u003e\u003cbr\u003e\u003c\/a\u003e\u003cbr\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan\u003e\u003c\/span\u003e\u003cspan\u003e\u003cspan\u003ePlease note, the majority of our products are made from ABS plastic, the flexibility of these products provides them the ability to withstand some pressure.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e\u003c\/span\u003e\u003cspan\u003eWe highly recommend installations are completed by a professional to ensure the product is fitted correctly and according to our fitting manuals.\u003c\/span\u003e\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e\u003c\/span\u003e\u003cspan\u003eWe can only accept a return within 30 days of delivery, if the product is in its original condition including protective film still on. A refund will be processed excluding shipping costs.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e\u003c\/span\u003e\u003cspan\u003e\u003cspan\u003eAll products arrive with a protective film, this is a very thin plastic vacuum sealed around the product to avoid the item sustaining any damage. Once removed you will notice the product does not have any scuffs or scratches. \u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e","brand":"Maxton Design","offers":[{"title":"Default Title","offer_id":47326841471272,"sku":"MXT-TO-CO-12-HB-GR-SD1G","price":174.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/5767\/7352\/files\/maxton-design-side-skirts-diffusers-toyota-corolla-gr-sport-hatchback-xii-2019-splitters-168.webp?v=1745022370"},{"product_id":"maxton-design-central-rear-splitter-toyota-corolla-gr-sport-hatchback-xii-2019","title":"Maxton Design Central Rear Splitter Toyota Corolla GR Sport Hatchback XII 2019-","description":"\u003cp\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan\u003eCENTRAL REAR SPLITTER TOYOTA COROLLA GR SPORT HATCHBACK XII (2019-)\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e\u003cbr\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan\u003e\u003cu\u003e\u003cspan\u003efits only:\u003c\/span\u003e\u003c\/u\u003e\u003c\/span\u003e\u003cspan\u003e \u003cbr\u003e\u003c\/span\u003eTOYOTA COROLLA GR SPORT HATCHBACK XII (2019-)\u003cbr\u003e\u003c\/p\u003e\u003cp\u003e\u003cu\u003e\u003cspan\u003eCOMPLETE SET CONTAINS:\u003c\/span\u003e\u003c\/u\u003e\u003cbr\u003e\u003cspan\u003e-\u0026gt; Central Rear Splitter\u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003ca\u003e\u003cspan\u003eFitting manual: \u003c\/span\u003e\u003c\/a\u003e\u003ca\u003ehttps:\/\/www.maxtondesign.co.uk\/pdf\/rear-center-splitter_fitting-manual-maxton.pdf\u003c\/a\u003e\u003cspan\u003e\u003cbr\u003e\u003c\/span\u003e\u003cbr\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan\u003e\u003cspan\u003ePlease note, the majority of our products are made from ABS plastic, the flexibility of these products provides them the ability to withstand some pressure.\u003c\/span\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan\u003e\u003cspan\u003e\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e\u003c\/span\u003e\u003cspan\u003eWe highly recommend installations are completed by a professional to ensure the product is fitted correctly and according to our fitting manuals.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e\u003c\/span\u003e\u003cspan\u003eIf you are unsure about the stock availability of a product(s), we would encourage you send us an email to sales@maxtondesign.co.uk and we’ll get back to you ASAP.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e\u003c\/span\u003e\u003cspan\u003eWe can only accept a return within 30 days of delivery, if the product is in its original condition including protective film still on. A refund will be processed excluding shipping costs.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e\u003c\/span\u003e\u003cspan\u003eAll products arrive with a protective film, this is a very thin plastic vacuum sealed around the product to avoid the item sustaining any damage. Once removed you will notice the product does not have any scuffs or scratches. \u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e","brand":"Maxton Design","offers":[{"title":"Default Title","offer_id":47326841602344,"sku":"MXT-TO-CO-12-HB-GR-RD1G","price":174.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/5767\/7352\/files\/maxton-design-central-rear-splitter-toyota-corolla-gr-sport-hatchback-xii-2019-splitters-skirts-diffusers-957.webp?v=1745201356"},{"product_id":"maxton-design-front-splitter-flaps-v-1-toyota-corolla-gr-sport-hatchback-xii-2019","title":"Maxton Design Front Splitter +flaps V.1 Toyota Corolla GR Sport Hatchback XII 2019-","description":"\u003cp\u003e\u003cspan\u003eFRONT SPLITTER (+FLAPS) V.1 TOYOTA COROLLA GR SPORT HATCHBACK XII (2019-)\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cu\u003e\u003cspan\u003e\u003cspan\u003eFits only:\u003c\/span\u003e\u003c\/span\u003e\u003c\/u\u003e \u003cbr\u003eTOYOTA COROLLA GR SPORT HATCHBACK XII (2019-)\u003c\/p\u003e\u003cp\u003e\u003cspan\u003e\u003cu\u003e\u003cspan\u003e\u003cbr\u003e\u003cspan\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/u\u003e\u003c\/span\u003e\u003cspan\u003e\u003cu\u003eCOMPLETE SET CONTAINS:\u003c\/u\u003e\u003c\/span\u003e\u003cbr\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan\u003e-\u0026gt; Splitter\/Front Bumper Lip Spoiler\u003cbr\u003e -\u0026gt; Mounting Kit\u003cbr\u003e -\u0026gt; Mounting Manual\u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan\u003e-\u0026gt; \u003c\/span\u003e\u003cspan\u003eFlaps in black matte colour(Racing Durability)\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan\u003eFitting manual: \u003c\/span\u003e\u003ca\u003ehttps:\/\/www.maxtondesign.co.uk\/pdf\/splitter_fitting-manual-maxton.pdf\u003c\/a\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan\u003e\u003c\/span\u003e\u003cspan\u003e\u003cspan\u003ePlease note, the majority of our products are made from ABS plastic, the flexibility of these products provides them the ability to withstand some pressure.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e\u003c\/span\u003e\u003cspan\u003e\u003cspan\u003eWe highly recommend installations are completed by a professional to ensure the product is fitted correctly and according to our fitting manuals.\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003eWe can only accept a return within 30 days of delivery, if the product is in its original condition including protective film still on. A refund will be processed excluding shipping costs.\u003cbr\u003e\u003cspan\u003e\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eAll products arrive with a protective film, this is a very thin plastic vacuum sealed around the product to avoid the item sustaining any damage. Once removed you will notice the product does not have any scuffs or scratches. \u003c\/span\u003e\u003c\/p\u003e","brand":"Maxton Design","offers":[{"title":"Default Title","offer_id":47326841667880,"sku":"MXT-TO-CO-12-HB-GR-FD1G+FSF","price":219.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/5767\/7352\/files\/maxton-design-front-splitter-flaps-v-1-toyota-corolla-gr-sport-hatchback-xii-2019-splitters-skirts-diffusers-316.webp?v=1745199839"},{"product_id":"maxton-design-side-skirts-diffusers-flaps-v-1-toyota-corolla-gr-sport-hatchback-xii-2019","title":"Maxton Design Side Skirts Diffusers +flaps V.1 Toyota Corolla GR Sport Hatchback XII 2019-","description":"\u003cp\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan\u003eSIDE SKIRTS DIFFUSERS (+FLAPS) V.1 TOYOTA COROLLA GR SPORT HATCHBACK XII (2019-)\u003c\/span\u003e\u003cbr\u003e\u003c\/p\u003e\u003cp\u003e\u003cu\u003e\u003cspan\u003eFits Only:\u003c\/span\u003e\u003c\/u\u003e\u003cspan\u003e\u003cspan\u003e \u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eTOYOTA COROLLA GR SPORT HATCHBACK XII (2019-)\u003c\/span\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cu\u003e\u003cspan\u003e\u003cspan\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/u\u003e\u003cu\u003e\u003cspan\u003eCOMPLETE SET CONTAINS\u003c\/span\u003e\u003cspan\u003e:\u003c\/span\u003e\u003c\/u\u003e\u003cbr\u003e\u003cspan\u003e-\u0026gt; Side Skirt Splitters\u003cbr\u003e-\u0026gt; \u003c\/span\u003e\u003cspan\u003eFlaps in black matte colour (Racing Durability)\u003c\/span\u003e\u003cspan\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan\u003eFitting manual: \u003c\/span\u003e\u003ca\u003e\u003cspan\u003ehttps:\/\/www.maxtondesign.co.uk\/pdf\/side-skirts-diffusers_fitting-manual-maxton.pdf\u003c\/span\u003e\u003c\/a\u003e\u003ca\u003e\u003cbr\u003e\u003c\/a\u003e\u003cbr\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan\u003e\u003c\/span\u003e\u003cspan\u003e\u003cspan\u003ePlease note, the majority of our products are made from ABS plastic, the flexibility of these products provides them the ability to withstand some pressure.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e\u003c\/span\u003e\u003cspan\u003eWe highly recommend installations are completed by a professional to ensure the product is fitted correctly and according to our fitting manuals.\u003c\/span\u003e\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e\u003c\/span\u003e\u003cspan\u003eWe can only accept a return within 30 days of delivery, if the product is in its original condition including protective film still on. A refund will be processed excluding shipping costs.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e\u003c\/span\u003e\u003cspan\u003e\u003cspan\u003eAll products arrive with a protective film, this is a very thin plastic vacuum sealed around the product to avoid the item sustaining any damage. Once removed you will notice the product does not have any scuffs or scratches. \u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e","brand":"Maxton Design","offers":[{"title":"Default Title","offer_id":47326841700648,"sku":"MXT-TO-CO-12-HB-GR-SD1G+SF","price":219.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/5767\/7352\/files\/maxton-design-side-skirts-diffusers-flaps-v-1-toyota-corolla-gr-sport-hatchback-xii-2019-splitters-193.webp?v=1745021850"},{"product_id":"syvecs-awd-4wd-controller-toyota-gr-corolla","title":"Syvecs AWD\/4WD Controller Toyota GR Corolla","description":"\u003cp\u003eIntroducing the Syvecs AWD Module specifically engineered for the Toyota GR Corolla, an innovative standalone AWD\/4WD\/Centre Diff controller designed to effectively manage any AWD\/4WD Solenoid\/Motor with a maximum capacity of 30 Amps through advanced pin sharing logic.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKey Features:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eUnlocking Control Potential:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBy incorporating the Syvecs AWD Module, a new realm of control becomes attainable. The module redefines AWD performance by optimizing control strategies, enabling users to harness the full potential of the powertrain.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eIntegration of OEM CAN Information:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThe GR Corolla version of the module perfectly replicates OEM CAN data. It leverages a variety of variables from the OEM CAN network, including Steering Angle, Brake Pressure, RPM, Throttle Position, Lateral G, Yaw, Longitudinal G, Speed, Temperatures, and mode switches, to enhance control strategies.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSeamless Interaction with Sport Mode Button:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eUtilize the Sport Mode Button on the GR Corolla to enable map switching, allowing drivers to transition seamlessly between Awd Select 1, 2, and 3. This provides the convenience of real-time customization of multiple maps, including the option to activate burnout mode when Hazards, Handbrake, or an external switch is engaged.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eCustomization and Safety Measures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSyvecs offers optional components such as external Burnout switches and Live adjustment potentiometers, providing drivers with the ability to fine-tune AWD Duty while driving or effortlessly switch to 2WD mode.\u003c\/li\u003e\n\u003cli\u003eIncorporate Limp Protection mechanisms that caution drivers about substantial slips, high currents, and elevated temperatures. Unlike OEM controllers that deactivate outputs, Syvecs' safeguards maintain AWD functionality, crucial for high horsepower applications.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eCompatibility with Syvecs Scal Software:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThe Scal Software facilitates direct connectivity to the module, empowering users to adjust over 40 maps influencing the solenoids\/motors responsible for AWD control.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eA Versatile Array of Configurable Maps:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e4 x Base Duty Tables\u003c\/li\u003e\n\u003cli\u003e4 x Adders with enable maps for Left Foot Braking, Front Slip, Rear Slip, and Centre Slip.\u003c\/li\u003e\n\u003cli\u003e4 x Multipliers with enable maps for Steering Angle, AWD Temp, AWD Pressure, and AWD Potentiometer.\u003c\/li\u003e\n\u003cli\u003eCalibration of Tyre Diameter under sensors for precise tuning.\u003c\/li\u003e\n\u003cli\u003eActivation of 2WD\/Burnout Mode.\u003c\/li\u003e\n\u003cli\u003eMap switching through Dedication Switched input, Can bus Message, and OEM Functions.\u003c\/li\u003e\n\u003cli\u003eVaried limiters including Maximum Duty, Launch Control Limit, Duty Rate of Change, Decay\/Hold Functions, Limp Mode, Over Current Protection, Over Slip Protection, Over Temp Protection, and AWD Cooling pump control.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eCan Bus Transmit Functionality:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThe module features a dedicated Can bus transmit section for sending AWD variables to external control units for monitoring or integration into the OEM Canbus system through custom Identifiers and byte structuring.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe Syvecs AWD Module for Toyota GR Corolla models offers an unprecedented opportunity to elevate AWD performance, thanks to its adaptable maps, safety features, and integration flexibility. It empowers drivers to personalize their vehicle's behavior based on individual preferences and requirements.\u003c\/p\u003e","brand":"Syvecs","offers":[{"title":"Default Title","offer_id":47406614511912,"sku":"SYV-4WDCorolla","price":960.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/5767\/7352\/files\/syvecs-awd-4wd-controller-toyota-gr-corolla-engine-management-ecu-963.webp?v=1745247940"},{"product_id":"tegiwa-setrab-oil-cooler-kit-toyota","title":"Tegiwa Setrab\/Mocal Oil Cooler Kit TOYOTA","description":"\u003cp\u003eTEGIWA Oil Cooler kit. Features only the best quality parts. Coolers are either Setrab or Mocal (depending on stock) and sandwich plates are manufactured by Mocal, the universal fitting kit is manufactured right here in the UK and it comes complete with high quality AN fittings and braided hose. They are available with either a normal sandwich plate or a thermostatic sandwich plate. Choose from 13, 16, 19 and a 25 row kit. The kit is a universal fitment, but with the fitting kit it should be easy to mount on all cars.\u003c\/p\u003e","brand":"Tegiwa","offers":[{"title":"13 \/ Normal","offer_id":47446177153320,"sku":"T-1877013-13","price":221.76,"currency_code":"GBP","in_stock":true},{"title":"16 \/ Normal","offer_id":47446177186088,"sku":"T-1877013-16","price":242.55,"currency_code":"GBP","in_stock":true},{"title":"19 \/ Normal","offer_id":47446177218856,"sku":"T-1877013-19","price":263.34,"currency_code":"GBP","in_stock":true},{"title":"25 \/ Normal","offer_id":47446177251624,"sku":"T-1877013-25","price":284.13,"currency_code":"GBP","in_stock":true},{"title":"13 \/ Thermostatic","offer_id":47446177284392,"sku":"T-1877013-13T","price":249.48,"currency_code":"GBP","in_stock":true},{"title":"16 \/ Thermostatic","offer_id":47446177317160,"sku":"T-1877013-16T","price":270.27,"currency_code":"GBP","in_stock":true},{"title":"19 \/ Thermostatic","offer_id":47446177349928,"sku":"T-1877013-19T","price":291.06,"currency_code":"GBP","in_stock":true},{"title":"25 \/ Thermostatic","offer_id":47446177382696,"sku":"T-1877013-25T","price":311.85,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/5767\/7352\/files\/tegiwa-setrab-mocal-oil-cooler-kit-toyota-13-normal-coolers-528.webp?v=1749035892"},{"product_id":"acl-race-series-performance-engine-bearings-toyorta-g16e-gts-gr-yaris-corolla","title":"ACL Race Series Performance Engine Bearings Toyorta G16E-GTS - GR Yaris\/Corolla","description":"\u003cp\u003eThe unique combination of design, metallurgy and engineering come together to deliver what drivers expect from high performance Trimetal engine bearings.\u003c\/p\u003e\n\u003cp\u003eDesigned to withstand higher RPM conditions, ACL Race Series Engine Bearings are available for many of the popular 4, 6 \u0026amp; 8 cylinder applications and feature:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHigh strength overlay plate with reduced thickness for improved fatigue properties\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003eHardened steel backs on all rod bearings to improve the support of the bearing lining and assist with bearing retention in the housing.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003eIncreased crush for improved bearing retention\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003eElimination of flash plating on the back of the bearings to improve heat transfer through the bearings and to maximize the grip between the bearings and its housing.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003eIncreased eccentricity to compensate for bore distortion at high rpm and to assist in the formation of hydrodynamic oil films.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e3\/4 grooved Main Bearings to optimize bearing load carrying surface area and oil flow to the conrod bearings.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003eTight consistent wall tolerances to help you maintain consistent clearances.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003eEnlarged ID chamfers on bearing edges where required to accommodate large fillet radius on performance crankshafts.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ACL","offers":[{"title":"Main \/ Standard - Stock Crank","offer_id":47636110639400,"sku":"4M8533H-STD","price":165.39,"currency_code":"GBP","in_stock":true},{"title":"Conrod \/ Standard - Extra Oil Clearance","offer_id":47636110672168,"sku":"3B8532HX-STD","price":113.59,"currency_code":"GBP","in_stock":true},{"title":"Main \/ Standard - Extra Oil Clearance","offer_id":47636110704936,"sku":"4M8533HX-STD","price":165.39,"currency_code":"GBP","in_stock":true},{"title":"Conrod \/ Standard - Stock Crank","offer_id":47636110737704,"sku":"3B8532H-STD","price":113.59,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/5767\/7352\/files\/acl-race-series-performance-engine-bearings-toyorta-g16e-gts-gr-yaris-corolla-bolts-studs-and-500.webp?v=1716759369"},{"product_id":"verus-engineering-carbon-dive-plane-canard-kit-toyota-gr-corolla","title":"Verus Engineering Carbon Dive Plane Canard Kit Toyota GR Corolla","description":"\u003cp\u003eThe Verus Engineering Dive Plane (Canard) Kit adds front-end downforce without the necessity of moving the front splitter further forward. Verus focuses on creating a strong vortex from the dive plane, this reduces lift in the wheel well as well as produces downforce on the unit itself.\u003c\/p\u003e\n\u003cp\u003eUtilizing state-of-the-art analysis software (CFD) during the R\u0026amp;D process, we were able to extract more performance for the given build volume; increasing downforce generated from the dive planes.\u003c\/p\u003e\n\u003cp\u003eThis dive plane kit was designed for owners looking to shift aero balance forward to help aid in balancing out a large rear wing or diffuser.\u003c\/p\u003e","brand":"Verus","offers":[{"title":"Default Title","offer_id":47712991805736,"sku":"A0512A","price":280.71,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/5767\/7352\/files\/verus-engineering-carbon-dive-plane-canard-kit-toyota-gr-corolla-canards-382.webp?v=1716819036"},{"product_id":"verus-engineering-rear-diffuser-toyota-gr-corolla","title":"Verus Engineering Rear Diffuser Toyota GR Corolla","description":"\u003cp\u003eThe Verus Engineering Rear Diffuser combines function, form, and science to deliver unparalleled fit, performance, and style to your Toyota GR Corolla. Increase the performance and aesthetics of the car with our simple to bolt-on kit that requires no permanent modifications to the car while retaining significant strength.\u003c\/p\u003e\n\u003cp\u003eUtilizing state-of-the-art analysis software during the R\u0026amp;D process, we were able to extract more performance for the given build volume; increasing downforce generated and drag reduced from the addition of the rear diffuser to the Toyota GR Corolla.\u003c\/p\u003e\n\u003cp\u003eDuring the design process; we utilized in-house scan data. This results in a product that features a near OEM fit and finish.\u003c\/p\u003e\n\u003cp\u003eThis Rear Diffuser was designed for owners looking for function and form. On track, the diffuser has helped us increase straight line and corner speeds and reduce our lap times.\u003c\/p\u003e","brand":"Verus","offers":[{"title":"Default Title","offer_id":47712991838504,"sku":"A0513A","price":1008.23,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/5767\/7352\/files\/verus-engineering-rear-diffuser-toyota-gr-corolla-splitters-skirts-diffusers-145.webp?v=1716819045"},{"product_id":"verus-engineering-rear-spat-kit-toyota-gr-corolla","title":"Verus Engineering Rear Spat Kit Toyota GR Corolla","description":"\u003cp\u003eAdd the Verus Engineering Street Rear Spats to your GR Corolla to complete the rear aerodynamics of your car. These units are designed specifically to flow with the rear bumper and our rear diffuser, helping to tie together the rear end with the rest of your aerodynamic kit.\u003c\/p\u003e\n\u003cp\u003eThe rear spats were designed for owners looking to complete their aerodynamic packages and improve the performance of the car. They also help keep road debris from flinging up on the car, similar to a mud flap.\u003c\/p\u003e","brand":"Verus","offers":[{"title":"Default Title","offer_id":47712991871272,"sku":"A0515A","price":169.72,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/5767\/7352\/files\/verus-engineering-rear-spat-kit-toyota-gr-corolla-splitters-skirts-diffusers-816.webp?v=1716819058"},{"product_id":"verus-engineering-full-brake-cooling-kit-toyota-gr-corolla","title":"Verus Engineering Full Brake Cooling Kit Toyota GR Corolla","description":"\u003cp\u003eThe Verus Engineering Full Brake Cooling Kit is configured in an OEM style format, with emphasis on the shortest route possible. Using a 3D printed carbon nylon inlet the bolts onto the factory bumper for fresh, high-pressure air and a stainless backing plate with a carbon duct, ducting air to the center of the rotor, this is the brake cooling kit to have. The kit comes with everything necessary for an install, including pre-cut hoses.\u003c\/p\u003e\n\u003cp\u003eDuring the design process; we utilized in-house scan data to design the components. This resulted in a product that features a near OEM fit and finish.\u003c\/p\u003e\n\u003cp\u003eThe Verus brake cooling kit was designed for owners looking to maximize their brake's cooling efficiency and increase their brake's ability to do their job.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e* We highly suggest replacing the axel nuts during the installation of this kit.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBacking Plate Including Carbon Ducts Riveted On (2, LH and RH)\u003c\/li\u003e\n\u003cli\u003e2.5\" Pre-Cut Silicone High Temp Brake Hose (2)\u003c\/li\u003e\n\u003cli\u003e2.5\" Stainless Hose Clamp (4)\u003c\/li\u003e\n\u003cli\u003e3D Printed Carbon Nylon Inlet Duct (2)\u003c\/li\u003e\n\u003cli\u003eHardware Kit, Includes All Necessary Pieces to Install Kit Seamlessly\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Verus","offers":[{"title":"Kit Only","offer_id":47712991969576,"sku":"A0525A","price":706.96,"currency_code":"GBP","in_stock":true},{"title":"With Replacement OEM Axle Nuts (Pair)","offer_id":47712992002344,"sku":"A0525A-AXL","price":765.48,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/5767\/7352\/files\/verus-engineering-full-brake-cooling-kit-toyota-gr-corolla-only-parts-and-accessories-616.webp?v=1716819068"},{"product_id":"verus-engineering-fhs-oil-cap-toyota-gr-corolla","title":"Verus Engineering FHS Oil Cap Toyota GR Corolla","description":"\u003cp\u003eReplace that boring OEM oil cap with a cap machined from solid aluminum in the United States of America!  The caps are offered in three common colors to add color to the engine bay.  The units install easily and within minutes with simple hand tools. Utilizing our two piece design, the logo can be clocked in whatever orientation you wish.\u003c\/p\u003e","brand":"Verus","offers":[{"title":"Black","offer_id":47712992067880,"sku":"A0544A-BLK","price":65.47,"currency_code":"GBP","in_stock":true},{"title":"Blue","offer_id":47712992100648,"sku":"A0544A-BLU","price":78.97,"currency_code":"GBP","in_stock":true},{"title":"Red","offer_id":47712992133416,"sku":"A0544A-RED","price":78.97,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/5767\/7352\/files\/verus-engineering-fhs-oil-cap-toyota-gr-corolla-black-engine-bay-904.webp?v=1716819081"},{"product_id":"verus-engineering-rla-oil-cap-toyota-gr-corolla","title":"Verus Engineering RLA Oil Cap Toyota GR Corolla","description":"\u003cp\u003eReplace that boring OEM oil cap with a cap machined from solid aluminum in the United States of America!  The caps are offered in three common colors to add color to the engine bay.  The units install easily and within minutes with simple hand tools. Utilizing our two piece design, the logo can be clocked in whatever orientation you wish.\u003c\/p\u003e","brand":"Verus","offers":[{"title":"Black","offer_id":47712992264488,"sku":"A0545A-BLK","price":78.97,"currency_code":"GBP","in_stock":true},{"title":"Blue","offer_id":47712992297256,"sku":"A0545A-BLU","price":78.97,"currency_code":"GBP","in_stock":true},{"title":"Red","offer_id":47712992330024,"sku":"A0545A-RED","price":78.97,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/5767\/7352\/files\/verus-engineering-rla-oil-cap-toyota-gr-corolla-black-engine-bay-488.webp?v=1716819100"},{"product_id":"verus-engineering-washer-fluid-reservoir-cap-toyota-gr-corolla","title":"Verus Engineering Washer Fluid Reservoir Cap Toyota GR Corolla","description":"\u003cp\u003eThe caps were designed to snap on like factory pieces, but in bright dip anodized aluminum to add aesthetics to the engine bay as well. The units are entirely made in the USA.\u003c\/p\u003e","brand":"Verus","offers":[{"title":"Black","offer_id":47712992461096,"sku":"A0550A-BLK","price":50.84,"currency_code":"GBP","in_stock":true},{"title":"Blue","offer_id":47712992493864,"sku":"A0550A-BLU","price":50.84,"currency_code":"GBP","in_stock":true},{"title":"Red","offer_id":47712992526632,"sku":"A0550A-RED","price":50.84,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/5767\/7352\/files\/verus-engineering-washer-fluid-reservoir-cap-toyota-gr-corolla-black-engine-bay-152.webp?v=1716819109"},{"product_id":"verus-engineering-gas-petrol-cap-cover-toyota-gr-corolla","title":"Verus Engineering Gas Petrol Cap Cover Toyota GR Corolla","description":"\u003cp\u003eCover up the lackluster plastic gas cap that comes from the factory with our cap machined from solid aluminum. These units are machined, anodized, and laser engraved in the USA.\u003c\/p\u003e\n\u003cp\u003eThe caps are offered in three common colors to match your other Verus Engineering fluid caps. The units install easily and in under a minute with no tools required. The units feature a retention style mounting and do *not* require double-sided tape.\u003c\/p\u003e","brand":"Verus","offers":[{"title":"Black","offer_id":47712993214760,"sku":"A0567A-BLK","price":58.71,"currency_code":"GBP","in_stock":true},{"title":"Blue","offer_id":47712993247528,"sku":"A0567A-BLU","price":58.71,"currency_code":"GBP","in_stock":true},{"title":"Red","offer_id":47712993280296,"sku":"A0567A-RED","price":58.71,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/5767\/7352\/files\/verus-engineering-gas-petrol-cap-cover-toyota-gr-corolla-black-lights-accessories-206.webp?v=1716819152"},{"product_id":"verus-engineering-air-conditioning-ac-line-cap-kit-toyota-gr-corolla","title":"Verus Engineering Air Conditioning AC Line Cap Kit Toyota GR Corolla","description":"\u003cp\u003eReplace the lackluster plastic caps that come from the factory with a cap machined from solid aluminum and bright anodized your favorite color.  The units install easily within minutes and simple hand tools.\u003c\/p\u003e","brand":"Verus","offers":[{"title":"Black","offer_id":47712993968424,"sku":"A0628A-BLK","price":53.09,"currency_code":"GBP","in_stock":true},{"title":"Blue","offer_id":47712994001192,"sku":"A0628A-BLU","price":53.09,"currency_code":"GBP","in_stock":true},{"title":"Red","offer_id":47712994033960,"sku":"A0628A-RED","price":53.09,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/5767\/7352\/files\/verus-engineering-air-conditioning-ac-line-cap-kit-toyota-gr-corolla-black-engine-bay-893.webp?v=1716819207"},{"product_id":"syvecs-plug-and-play-ecu-kit-toyota-corolla-gr","title":"Syvecs Plug and Play ECU Kit Toyota Corolla GR","description":"\u003cp\u003eThe Syvecs Toyota Corolla GR Kit brings a new level of engine management control to the Toyota Corolla GR range.\u003c\/p\u003e\n\u003cp\u003eDesigned to work for a factory car or the highest level of motorsport, the Syvecs plug in ecu offers the following to the platform:\u003c\/p\u003e\n\u003cp\u003e• Live Tuning of every aspect of the engine’s calibration\u003c\/p\u003e\n\u003cp\u003e• Live Tuning of Torque Control for adjusting torque limiters and Awd operation\u003c\/p\u003e\n\u003cp\u003e• Adjustable Launch Control strategy based on Speed, GPS or Time\u003c\/p\u003e\n\u003cp\u003e• Flex Fuel control with ethanol content shown on the dash\u003c\/p\u003e\n\u003cp\u003e• AWD Duty \/ AWD Temperature monitoring - Additional Standalone AWD Controller also available -https:\/\/www.syvecs.com\/product\/awd-4wd-controller-toyota-corolla-gr\/\u003c\/p\u003e\n\u003cp\u003e• Direct injection and Port Injection control\u003c\/p\u003e\n\u003cp\u003e• Electronic Wastegate Support\u003c\/p\u003e\n\u003cp\u003e• Electronic Valve Control\u003c\/p\u003e\n\u003cp\u003e• IMT Functional\u003c\/p\u003e\n\u003cp\u003e• Additional I\/O Available via 26Way header - 1 x K-Type Input, 1 x GDI Injector Output, 1 x NTK\/LSU Input, 2 x Canbus, 3 x Spare Outputs, Rs232 Connection\u003c\/p\u003e\n\u003cp\u003e• Flat foot shifting\u003c\/p\u003e\n\u003cp\u003e• Configurable Engine Safety Trips on all important parameters like oil temperature, oil pressure, Lambda, fuel pressure and crankcase pressure\u003c\/p\u003e\n\u003cp\u003e• 64mb Built in data logging using a market leading analysis software of over 8 hours worth of data, with data rates at up to 1000hz\u003c\/p\u003e\n\u003cp\u003e• Factory Turbo support and Aftermarket Larger Turbos\u003c\/p\u003e\n\u003cp\u003e• 6 Injector control with support to use any aftermarket injector\u003c\/p\u003e\n\u003cp\u003e• Rolling Antilag !\u003c\/p\u003e\n\u003cp\u003e• Evap Control\u003c\/p\u003e\n\u003cp\u003e• Ability to select desired engine map, boost level, traction and launch control levels through either a External 12 Position external switch or via OEM Cruise control buttons\u003c\/p\u003e\n\u003cp\u003e• Cruise Control\u003c\/p\u003e\n\u003cp\u003e• Full Variable Valve Timing control\u003c\/p\u003e\n\u003cp\u003e• Closed loop Lambda Control using supplied NTK Sensor\u003c\/p\u003e\n\u003cp\u003e• \u003cstrong\u003ePre collision, Radar control and Lane Assist NOT Supported\u003c\/strong\u003e, though DSC\/Low speed collision warning system dashboard error lights are not illuminated.\u003c\/p\u003e\n\u003cp\u003e• Fully adjustable closed loop boost control with launch level adjustments and trims for turbo speed, air charge, engine coolant temp, exhaust gas temperatures etc\u003c\/p\u003e\n\u003cp\u003e• Monitor and trimming of exhaust gas temperatures\u003c\/p\u003e\n\u003cp\u003e• Antitheft and valet modes\u003c\/p\u003e\n\u003cp\u003e• Super fast connection via RJ45 Ethernet port for live tuning anywhere in the world or even remotely if on track if connected to a wireless unit.\u003c\/p\u003e\n\u003cp\u003e• Adjustable traction control strategies based on lateral g, GPS Speed and\/or individual wheel speed monitoring.\u003c\/p\u003e\n\u003cp\u003e• 4 programmable and selectable target slip maps. An immediate torque reduction can be applied by the ECU via ignition retard or a fuel cut.\u003c\/p\u003e\n\u003cp\u003e• Fuel pump control of both intake and di pump, as well as Relative fuel pressure monitoring and limiting in the event of fuel pressure dropping on boost.\u003c\/p\u003e\n\u003cp\u003e• 4 different Pedal to Throttle Angle maps with multipliers for different parameters e.g. speed. Again adjustable via steering wheel buttons\u003c\/p\u003e\n\u003cp\u003e• Configurable individual cylinder closed loop knock control, to suit any cylinder modification with adjustments to frequency, windows for listening and gains for each cylinder. Ability to trigger full cylinder shutdown in severe\u003c\/p\u003e\n\u003cp\u003eknock conditions.\u003c\/p\u003e\n\u003cp\u003e• Run up to 10bar map sensors\u003c\/p\u003e\n\u003cp\u003e• Change injector dead times based on voltage levels for proper control\u003c\/p\u003e\n\u003cp\u003e• Change injector end angle to ensure injection point is properly calibrated\u003c\/p\u003e\n\u003cp\u003e• Ability to fit any type of external sensor to monitor and trigger safety trips from anything from crank case pressure to damper position\u003c\/p\u003e\n\u003cp\u003e• Ability to use any size DBW throttle body e.g. Chevrolet LS7\u003c\/p\u003e\n\u003cp\u003e• Wet and Dry – Wet and Dry nitrous control with ability to drive solenoids directly and control n20 heaters via pressure monitoring\u003c\/p\u003e\n\u003cp\u003e• Ability to control any external vehicle features based on sensor inputs e.g. Adjustable rear wing linked to G force or exhaust control valves\u003c\/p\u003e\n\u003cp\u003e• Connect any race series dash via spare canbus\u003c\/p\u003e\n\u003cp\u003e• View any input live with built in scope up to 1000hz\u003c\/p\u003e\n\u003cp\u003e• And much, much more!\u003c\/p\u003e\n\u003cp\u003e\u003c\/p\u003e\n\u003cp\u003eQ) Do you control the OEM VVT\u003cbr\u003eA) Yes, this is adjustable via Variable Valve timing calibrations, Can Change Intake and Exhaust Cam Targets\u003c\/p\u003e\n\u003cp\u003eQ) Can we use this Kit when the engine is fitted in another car which doesn't need canbus\u003cbr\u003eA) Yes, the dealer would need to do the car side of the wiring for the kit though like 12v, pedal signal, fuel pump control etc\u003c\/p\u003e\n\u003cp\u003eQ) Do you support antilag?\u003cbr\u003eA) Yes, our ecu is used by many top rally teams who use it for competitions and we pride our strategies to be the best.\u003c\/p\u003e\n\u003cp\u003eQ) Can you adjust the launch rpm?\u003cbr\u003eA) Yes\u003c\/p\u003e\n\u003cp\u003eQ) Do you support Flex Fuel\u003cbr\u003eA) Yes, see the Installation manual on recommended fitting. We even show the Ethanol Content on the Dash when changing calibration\u003c\/p\u003e\n\u003cp\u003eQ) Can you alter the Awd ?\u003cbr\u003eA) Adjusting the Torque Demand table output does effect the AWD operation but for full control we sell a standalone AWD Controller for the CorollaGr - See here - https:\/\/www.syvecs.com\/product\/awd-4wd-controller-toyota-corolla-gr\/\u003c\/p\u003e\n\u003cp\u003eQ) Do you supply a base map for the kit?\u003cbr\u003eA) Yes, as with all our kits we supply a very good base calibration to get everything working for you. This will be supplied via your Syvecs dealer.\u003c\/p\u003e\n\u003cp\u003eQ) How do we change calibrations?\u003cbr\u003eA) This is done via the Oem Cruise buttons. Pushing the Cruise Cancel button is Cal Overide for rolling antilag\u003c\/p\u003e\n\u003cp\u003eQ) What of the original OEM features will now not work?\u003cbr\u003eA) The Pre collision system and Lane assist is not supported\u003c\/p\u003e\n\u003cp\u003eQ) Can i change the OEM BOV Setup\u003cbr\u003eA) Yes you can fit any type you wish\u003c\/p\u003e","brand":"Syvecs","offers":[{"title":"Default Title","offer_id":47731864699176,"sku":"SYV-SGDI-COROLLA","price":5160.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/5767\/7352\/files\/syvecs-plug-and-play-ecu-kit-toyota-corolla-gr-engine-management-957.webp?v=1745187093"},{"product_id":"milltek-gr-corolla-1-6-turbo-secondary-cat-back-exhaust","title":"Milltek GR Corolla 1.6 Turbo - Secondary Cat-back Exhaust","description":"\u003cp\u003eAll Milltek performance exhaust systems are manufactured from T304L stainless-steel; giving you the satisfaction of knowing that our products are meant to last within some of the toughest environments. T304L is a highly durable form of stainless-steel that is far less susceptible to degradation and discolouration than many others of its kind, while it will last almost indefinitely.\u003c\/p\u003e","brand":"Milltek","offers":[{"title":"Non Resonated - Polished Tips","offer_id":47741476405544,"sku":"MIL-SSXTY145","price":1845.05,"currency_code":"GBP","in_stock":true},{"title":"Non Resonated - Cerakote Black Tips","offer_id":47741476438312,"sku":"MIL-SSXTY146","price":2048.07,"currency_code":"GBP","in_stock":true},{"title":"Non Resonated - Titanium Tips","offer_id":47741476471080,"sku":"MIL-SSXTY147","price":2351.86,"currency_code":"GBP","in_stock":true},{"title":"Non Resonated - Burnt Titanium Tips","offer_id":47741476503848,"sku":"MIL-SSXTY148","price":2459.92,"currency_code":"GBP","in_stock":true},{"title":"Resonated - Polished Tips","offer_id":47741476536616,"sku":"MIL-SSXTY155","price":1967.71,"currency_code":"GBP","in_stock":true},{"title":"Resonated - Cerakote Black Tips","offer_id":47741476569384,"sku":"MIL-SSXTY156","price":2170.73,"currency_code":"GBP","in_stock":true},{"title":"Resonated - Titanium Tips","offer_id":47741476602152,"sku":"MIL-SSXTY157","price":2474.51,"currency_code":"GBP","in_stock":true},{"title":"Resonated - Burnt Titanium Tips","offer_id":47741476634920,"sku":"MIL-SSXTY158","price":2582.57,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/5767\/7352\/files\/milltek-gr-corolla-1-6-turbo-secondary-cat-back-exhaust-non-resonated-cerakote-black-tips-systems-224.webp?v=1752736877"},{"product_id":"milltek-gr-corolla-1-6-turbo-large-bore-downpipe-and-hi-flow-sports-cat-exhaust","title":"Milltek GR Corolla 1.6 Turbo - Large Bore Downpipe and Hi-Flow Sports Cat Exhaust","description":"\u003cp\u003eAll Milltek performance exhaust systems are manufactured from T304L stainless-steel; giving you the satisfaction of knowing that our products are meant to last within some of the toughest environments. T304L is a highly durable form of stainless-steel that is far less susceptible to degradation and discolouration than many others of its kind, while it will last almost indefinitely.\u003c\/p\u003e","brand":"Milltek","offers":[{"title":"OE Exhaust Fitment","offer_id":47741477126440,"sku":"MIL-SSXTY153","price":1468.81,"currency_code":"GBP","in_stock":true},{"title":"Milltek Exhaust Fitment","offer_id":47741477159208,"sku":"MIL-SSXTY154","price":1422.08,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/5767\/7352\/files\/milltek-gr-corolla-1-6-turbo-large-bore-downpipe-and-hi-flow-sports-cat-exhaust-fitment-decats-cats-435.webp?v=1752738771"},{"product_id":"milltek-gr-corolla-1-6-turbo-primary-cat-back-exhaust","title":"Milltek GR Corolla 1.6 Turbo - Primary Cat-back Exhaust","description":"\u003cp\u003eAll Milltek performance exhaust systems are manufactured from T304L stainless-steel; giving you the satisfaction of knowing that our products are meant to last within some of the toughest environments. T304L is a highly durable form of stainless-steel that is far less susceptible to degradation and discolouration than many others of its kind, while it will last almost indefinitely.\u003c\/p\u003e","brand":"Milltek","offers":[{"title":"Non Resonated - Polished Tips","offer_id":47741477191976,"sku":"MIL-SSXTY149","price":2298.04,"currency_code":"GBP","in_stock":true},{"title":"Non Resonated - Cerakote Black Tips","offer_id":47741477224744,"sku":"MIL-SSXTY150","price":2501.06,"currency_code":"GBP","in_stock":true},{"title":"Non Resonated - Titanium Tips","offer_id":47741477257512,"sku":"MIL-SSXTY151","price":2804.86,"currency_code":"GBP","in_stock":true},{"title":"Non Resonated - Burnt Titanium Tips","offer_id":47741477290280,"sku":"MIL-SSXTY152","price":2912.91,"currency_code":"GBP","in_stock":true},{"title":"Resonated - Polished Tips","offer_id":47741477323048,"sku":"MIL-SSXTY159","price":2420.7,"currency_code":"GBP","in_stock":true},{"title":"Resonated - Cerakote Black Tips","offer_id":47741477355816,"sku":"MIL-SSXTY160","price":2623.72,"currency_code":"GBP","in_stock":true},{"title":"Resonated - Titanium Tips","offer_id":47741477388584,"sku":"MIL-SSXTY161","price":2927.51,"currency_code":"GBP","in_stock":true},{"title":"Resonated - Burnt Titanium Tips","offer_id":47741477421352,"sku":"MIL-SSXTY166","price":3035.57,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/5767\/7352\/files\/milltek-gr-corolla-1-6-turbo-primary-cat-back-exhaust-non-resonated-titanium-tips-systems-527.webp?v=1752696857"},{"product_id":"buddy-club-oil-cap-toyota","title":"Buddy Club Oil Cap Toyota","description":"\u003cp\u003eBuddyclub Genuine oil filler cap Japanese High quality oil filler cap with 'O' ring oil seal and brand identification. Adds high quality to engine dress. Solid weighted filler cap in superb top quality brand packaging.\u003c\/p\u003e","brand":"Buddy Club","offers":[{"title":"Black","offer_id":47881452454184,"sku":"BDC-QRUE-02-BK","price":55.69,"currency_code":"GBP","in_stock":true},{"title":"Titanium Silver","offer_id":47881452486952,"sku":"BDC-QRUE-02-TI","price":55.69,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/5767\/7352\/files\/buddy-club-oil-cap-toyota-engine-dressup-193.webp?v=1716932805"},{"product_id":"tsw-imatra-5x114-18x8j-et35-76mm-cb-matt-black-toyota-gr-yaris-corolla","title":"TSW Imatra 5x114 18x8J ET35 76mm CB Matt Black Toyota GR Yaris Corolla","description":"\u003cp\u003eThe TSW Imatra wheel features a track inspired split 5 spoke design that is accented by a deep recessed lug bowl for maximum brake caliper clearance on your Toyota GR Yaris or GR Corolla. This specific Imatra is exclusively engineered and manufactured as an 18\" wheel with a width of 8J and an offset of ET35 for an optimal strength and weight combination for the street or track. These wheels are finished in matt black and are sure to complement the paintwork of your GR Yaris or Corolla, no matter what colour it is!\u003c\/p\u003e\n\u003cp\u003eWhether you're hitting the track or trying to squeeze out some extra MPGs on your daily driver, our Flow Formed Technology wheel series offers a variety of superior strength and ultra-lightweight solutions for your vehicle. Cut down on unsprung weight and rotational mass and experience the performance of TSW’s Flow Formed Technology.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSplit 5 Spoke with deep recessed lug bowl\u003c\/li\u003e\n\u003cli\u003eFFT (Flow Formed Technology) construction to optimize strength and weight\u003c\/li\u003e\n\u003cli\u003eSnap In Cap\u003c\/li\u003e\n\u003cli\u003e5 lug applications\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThese wheels will simply bolt onto your GR Yaris and give you 10mm wider fitment over the OEM wheels. When fitted to the GR Corolla these will sit 11.5mm further inside the wheel so we would recommend a set of spacers for optimum fitment. For a more aggressive fitment, you should consider the TSW Imatra 18x8.5 ET35 option.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eActual Wheel Weight: 8.10kg\u003c\/strong\u003e\u003c\/p\u003e","brand":"TSW","offers":[{"title":"Default Title","offer_id":48226254881064,"sku":"1880ITA355114M76","price":285.6,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/5767\/7352\/files\/tsw-imatra-5x114-18x8j-et35-76mm-cb-matt-black-toyota-gr-yaris-corolla-alloy-wheels-810.webp?v=1736508325"},{"product_id":"tsw-imatra-5x114-18x8-5j-et35-76mm-cb-matt-black-toyota-gr-yaris-corolla","title":"TSW Imatra 5x114 18x8.5J ET35 76mm CB Matt Black Toyota GR Yaris Corolla","description":"\u003cp\u003eThe TSW Imatra wheel features a track inspired split 5 spoke design that is accented by a deep recessed lug bowl for maximum brake caliper clearance on your Toyota GR Yaris or GR Corolla. This specific Imatra is exclusively engineered and manufactured as an 18\" wheel with a width of 8.5J and an offset of ET35 for an optimal strength and weight combination for the street or track. These wheels are finished in matt black and are sure to complement the paintwork of your GR Yaris or Corolla, no matter what colour it is!\u003c\/p\u003e\n\n\u003cp\u003eWhether you're hitting the track or trying to squeeze out some extra MPGs on your daily driver, our Flow Formed Technology wheel series offers a variety of superior strength and ultra-lightweight solutions for your vehicle. Cut down on unsprung weight and rotational mass and experience the performance of TSW’s Flow Formed Technology.\u003c\/p\u003e\n\n\u003cp\u003eSplit 5 Spoke with deep recessed lug bowl\n\u003cbr\u003eFFT (Flow Formed Technology) construction to optimize strength and weight\n\u003cbr\u003eSnap In Cap\n\u003cbr\u003e5 lug applications\n\u003cbr\u003eThese wheels will simply bolt onto your GR Yaris and give you 16.5mm wider fitment over the OEM wheels. When fitted to the GR Corolla these will sit 5mm further inside the wheel so we would recommend a set of spacers for optimum fitment. For a less aggressive fitment, you should consider the TSW Imatra 18x8 ET35 option.\u003c\/p\u003e","brand":"TSW","offers":[{"title":"Default Title","offer_id":48226254979368,"sku":"1885ITA355114M76","price":274.8,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/5767\/7352\/files\/tsw-imatra-5x114-18x8-5j-et35-76mm-cb-matt-black-toyota-gr-yaris-corolla-alloy-wheels-876.webp?v=1749826337"},{"product_id":"funk-motorsport-turbo-blanket-toyota-gr-corolla","title":"Funk Motorsport Turbo Blanket Toyota GR Corolla 22+","description":"\u003cdiv data-widget_type=\"woocommerce-product-short-description.default\" data-element_type=\"widget\" data-id=\"7e2f5520\" class=\"elementor-element elementor-element-7e2f5520 elementor-widget elementor-widget-woocommerce-product-short-description\"\u003e\n\u003cdiv class=\"elementor-widget-container\"\u003e\n\u003cdiv class=\"woocommerce-product-details__short-description\"\u003e\n\u003cp\u003eHere at Funk Motorsport, we are known for our industry leading turbo blankets! Improve performance, protection and reliability with our durable Funk Motorsport Toyota Corolla GR engine Turbo blanket.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv data-widget_type=\"icon-list.default\" data-element_type=\"widget\" data-id=\"2a1da03\" class=\"elementor-element elementor-element-2a1da03 elementor-icon-list--layout-traditional elementor-list-item-link-full_width elementor-widget elementor-widget-icon-list\"\u003e\n\u003cdiv class=\"elementor-widget-container\"\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cspan class=\"elementor-icon-list-icon\"\u003e\u003ci class=\"fas fa-circle\" aria-hidden=\"true\"\u003e\u003c\/i\u003e\u003c\/span\u003e\u003cspan class=\"elementor-icon-list-text\"\u003eIndustry leading construction\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan class=\"elementor-icon-list-icon\"\u003e\u003ci class=\"fas fa-circle\" aria-hidden=\"true\"\u003e\u003c\/i\u003e\u003c\/span\u003e\u003cspan class=\"elementor-icon-list-text\"\u003eReduce temperatures by up to 90%\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\u003cspan class=\"elementor-icon-list-text\"\u003eAvailable in both Titanium and Carbon Fibre\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003csection data-element_type=\"section\" data-id=\"115b1c90\" class=\"elementor-section elementor-top-section elementor-element elementor-element-115b1c90 elementor-section-boxed elementor-section-height-default elementor-section-height-default\"\u003e\n\u003cdiv class=\"elementor-container elementor-column-gap-default\"\u003e\n\u003cdiv data-element_type=\"column\" data-id=\"3291537b\" class=\"elementor-column elementor-col-100 elementor-top-column elementor-element elementor-element-3291537b\"\u003e\n\u003cdiv class=\"elementor-widget-wrap elementor-element-populated\"\u003e\n\u003cdiv data-widget_type=\"heading.default\" data-element_type=\"widget\" data-id=\"5bbc7693\" class=\"elementor-element elementor-element-5bbc7693 elementor-widget elementor-widget-heading\"\u003e\n\u003cdiv class=\"elementor-widget-container\"\u003e\n\u003ch2 class=\"elementor-heading-title elementor-size-default\"\u003ePERFORMANCE\u003c\/h2\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv data-widget_type=\"text-editor.default\" data-element_type=\"widget\" data-id=\"49abe5e\" class=\"elementor-element elementor-element-49abe5e elementor-widget elementor-widget-text-editor\"\u003e\n\u003cdiv class=\"elementor-widget-container\"\u003eImprove gas flow and increase performance with our Toyota Corolla GR engine turbo blanket. Our Funk Motorsport GR Yaris turbo jackets work to insulate the hot side of the turbo and retain the heat within the exhaust gases themselves. Hotter gases accelerate faster leading to them leaving the system sooner improving spool up and throttle response. Insulating the hot side of your turbo also helps to lower the amount of heat from the turbo that dissipates into the engine bay and intake pipework. A cooler intake results in higher performance and more consistent power figures over time.\u003c\/div\u003e\n\u003cdiv class=\"elementor-widget-container\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/section\u003e\n\u003csection data-element_type=\"section\" data-id=\"3e32b3e6\" class=\"elementor-section elementor-top-section elementor-element elementor-element-3e32b3e6 elementor-section-boxed elementor-section-height-default elementor-section-height-default\"\u003e\n\u003cdiv class=\"elementor-container elementor-column-gap-default\"\u003e\n\u003cdiv data-element_type=\"column\" data-id=\"3de38d8\" class=\"elementor-column elementor-col-100 elementor-top-column elementor-element elementor-element-3de38d8\"\u003e\n\u003cdiv class=\"elementor-widget-wrap elementor-element-populated\"\u003e\n\u003cdiv data-widget_type=\"heading.default\" data-element_type=\"widget\" data-id=\"447f5973\" class=\"elementor-element elementor-element-447f5973 elementor-widget elementor-widget-heading\"\u003e\n\u003cdiv class=\"elementor-widget-container\"\u003e\n\u003ch2 class=\"elementor-heading-title elementor-size-default\"\u003ePROTECTION\u003c\/h2\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv data-widget_type=\"text-editor.default\" data-element_type=\"widget\" data-id=\"f523beb\" class=\"elementor-element elementor-element-f523beb elementor-widget elementor-widget-text-editor\"\u003e\n\u003cdiv class=\"elementor-widget-container\"\u003eA turbo is an absolute furnace within the engine bay. Excess heat produced by the turbo can cause devastation to surrounding sensitive components. Protect anything from oil lines, coolant lines and even bodywork positioned close to the turbo from the dangers of excess heat.\u003c\/div\u003e\n\u003cdiv class=\"elementor-widget-container\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/section\u003e\n\u003csection data-element_type=\"section\" data-id=\"6cd21c63\" class=\"elementor-section elementor-top-section elementor-element elementor-element-6cd21c63 elementor-section-boxed elementor-section-height-default elementor-section-height-default\"\u003e\n\u003cdiv class=\"elementor-container elementor-column-gap-default\"\u003e\n\u003cdiv data-element_type=\"column\" data-id=\"69b8b00\" class=\"elementor-column elementor-col-100 elementor-top-column elementor-element elementor-element-69b8b00\"\u003e\n\u003cdiv class=\"elementor-widget-wrap elementor-element-populated\"\u003e\n\u003cdiv data-widget_type=\"heading.default\" data-element_type=\"widget\" data-id=\"32b95678\" class=\"elementor-element elementor-element-32b95678 elementor-widget elementor-widget-heading\"\u003e\n\u003cdiv class=\"elementor-widget-container\"\u003e\n\u003ch2 class=\"elementor-heading-title elementor-size-default\"\u003eRELIABILITY\u003c\/h2\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv data-widget_type=\"text-editor.default\" data-element_type=\"widget\" data-id=\"ca705ca\" class=\"elementor-element elementor-element-ca705ca elementor-widget elementor-widget-text-editor\"\u003e\n\u003cdiv class=\"elementor-widget-container\"\u003eInsulate your Toyota Corolla GR engine turbo to reduce excess heat within your engine bay. Reducing the overall temperature of the engine bay will improve the reliability of electronics, and also help improve the temperature of coolant, fuel and oil lines. From a reliability standpoint, the benefits of a turbo blanket are endless.\u003cbr\u003e\u003cbr\u003eWhile we are on the topic of reliability, what makes a Funk Motorsport turbo blanket the most reliable and durable turbo blanket on the market?\u003cbr\u003e\u003cbr\u003e– Specifically developed thread construction to allow for exceptional durability when removal is necessary for routine turbo maintenance. Our new fireproof ultra-high temperature Stainless Steel thread is around 1mm in diameter and can now remain highly durable with temperatures in excess of 1300°C.\u003cbr\u003e\u003cbr\u003e– New, thicker internal heat lagging insulation to provide up to 3x improved heat reduction. This insulation wool is created from a ceramic silica complex matting to improve durability over prolonged heat cycles, as well as insulation quantities.\u003cbr\u003e\u003cbr\u003e– 4-layer construction for improved reliability.\u003cbr\u003e\u003cbr\u003e– Uprated external Carbon Fibre twill and Titanium twill for an improved aesthetic and more durable finish.\u003cbr\u003e\u003cbr\u003e– ROHS tested and approved to ensure compliance and desired parameters are reached within our material selection.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eNote of caution:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis turbo blanket is not flammable. However, if any flammable fluids are introduced into close proximity of the blanket, the blanket could become a suitable ignition source for a flame to be produced. Please ensure that all necessary precautions are taken in regards to the appropriate maintenance of all oil and fuel lines and fittings surrounding the turbo charger and fuel injection system. Funk Motorsport take no responsibility for fluid contamination our products.\u003c\/div\u003e\n\u003cdiv class=\"elementor-widget-container\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/section\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Funk Motorsport","offers":[{"title":"Titanium","offer_id":48475407155496,"sku":"FUNK-TBYGR-TI1","price":187.5,"currency_code":"GBP","in_stock":true},{"title":"Carbon","offer_id":48475407188264,"sku":"FUNK-TBYGR-CF1","price":187.5,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/5767\/7352\/files\/funk-motorsport-turbo-blanket-toyota-gr-corolla-22-thermal-management-233.webp?v=1717023698"},{"product_id":"zestek-oem-racing-steering-wheel-hub-toyota-gr-corolla","title":"Zestek Racing SCX Steering Wheel Control Panel Toyota GR Corolla","description":"\u003cp\u003eThe SCX is Zestek’s latest racing control hub for OEM ECU-equipped performance vehicles.\u003c\/p\u003e\n\u003cp\u003ePlease note that this product is compatible only with vehicles that use an OEM ECU. For CAN-equipped vehicles, please see our alternative options, the SCX-Pro and DRX.\u003c\/p\u003e\n\u003cp\u003eTaking the key success points from the first generation unit and incorporating customer feedback and in-house product innovation, the SCX is the ideal upgrade for the dual-duty motorsport build.\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.youtube.com\/watch?v=8l3cWv-c4Z8\" title=\"Zestek installation video\"\u003eClick here to watch our installation video\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eKey Features\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFull OEM function support \u003c\/strong\u003e- Zestek’s proprietary communication chip is an independently installable OEM protocol adaptor which allows communication with almost all vehicles on the market.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVeloLink Wireless System\u003c\/strong\u003e - Our proprietary VeloLink 2.4G protocol wireless system supports up to 6 wireless devices including OBD modules. Fully expandable with multiple VeloLink wireless accessories.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWireless OBD and Feedback Lights\u003c\/strong\u003e - The integrated VeloLink OBD module includes multiple feedback lights to display real time vehicle status allowing your SCX to fully monitor and control your car.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVeloLink Wireless Switches\u003c\/strong\u003e - Using VeloLink’s wireless switch modules you can support 16 fully customizable vehicle control switches. Supporting all functions such as exhaust valving, ESP, PTC etc. - all directly controlled from your SCX.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCarbon Fiber Composite Material\u003c\/strong\u003e - The 50% carbon fiber composite front panel combines ideal physical properties and a performance aesthetic to provide excellent lightness and high rigidity.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePogo Pin Quick Release\u003c\/strong\u003e - This exclusive-to-Zestek quick release is CNC-machined for the perfect mechanical and digital connection.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCustom Button System\u003c\/strong\u003e - Built specifically for Zestek, the dual-stage buttons on the panel are paired with 16.7 million colour RGB lighting for the ultimate tactile and visual experience.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eV2.0 Magnetic Paddles\u003c\/strong\u003e - The much-loved magnetic shifters from the first generation item have been reiterated for a new shifter mechanism that enables super crisp and responsive action. Durability-tested with over 1 million presses without failure.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSteering Wheel Compatibility\u003c\/strong\u003e - The SCX is compatible with most 350mm and 330mm (clearance may be tight) aftermarket steering wheels, with a PCD of 6x70mm. For specific fitment guides please refer to our supporting documentation on the website.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003csection\u003e\u003c\/section\u003e\n\u003csection\u003e\u003c\/section\u003e\n\u003csection\u003e\u003c\/section\u003e","brand":"Zestek Racing","offers":[{"title":"No","offer_id":48486149095720,"sku":"ZTR-H002-TOY-GRC","price":999.0,"currency_code":"GBP","in_stock":true},{"title":"Yes","offer_id":48486149226792,"sku":"ZTR-H002-TOY-GRC-WB-550","price":1098.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/5767\/7352\/files\/Zestek-SCX-1_75031f5e-8204-4e2b-b825-50792b7e0229.jpg?v=1768387636"},{"product_id":"hks-nano-cabin-filter-toyota-1","title":"HKS Nano Cabin Filter Toyota 1","description":"\u003cp\u003eHKS Nano Cabin Filter Toyota 1\u003c\/p\u003e","brand":"HKS","offers":[{"title":"Default Title","offer_id":48672904118568,"sku":"70027-AT001","price":37.2,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/5767\/7352\/files\/hks-nano-cabin-filter-toyota-1-air-filters-735.webp?v=1717512529"},{"product_id":"hks-nano-cabin-filter-toyota-2","title":"HKS Nano Cabin Filter Toyota 2","description":"\u003cp\u003eHKS Nano Cabin Filter Toyota 2\u003c\/p\u003e","brand":"HKS","offers":[{"title":"Default Title","offer_id":48672904249640,"sku":"70027-AT002","price":37.2,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/5767\/7352\/files\/hks-nano-cabin-filter-toyota-2-air-filters-887.webp?v=1717512540"},{"product_id":"hks-super-air-filter-toyota-type12","title":"HKS Super Air Filter TOYOTA type12","description":"Super Air Filter are stock replacement air filters. Featuring a newly developed dry non-woven fabric filter element for reduced airflow resistance and high dust collection capacity.\n\u003cbr\u003e\n\u003cbr\u003eNewly Developed Dry Non-woven Fabric Filter Element\n\u003cbr\u003e\n\u003cbr\u003eFeaturing a density gradient structure where the filter density becomes higher with each layer ensures all sizes of dust and other particles are caught in the most effective way. Optimising the fibre components reduces the air flow resistance.\n\u003cbr\u003e\n\u003cbr\u003eLow Resistance \u0026amp; High Dust Collection Capacity\n\u003cbr\u003e\n\u003cbr\u003eEven though the intake resistance is reduced, the dust collection capacity remains high. (Collected more than 95% dust volume during in-house testing) The Super Filter reliably captures dust to provide clean air to the engine.\n\u003cbr\u003e\n\u003cbr\u003eLong-term Low Resistance\n\u003cbr\u003e\n\u003cbr\u003eEven after long-term use of the Super Filter, the intake resistance remain as low as when new.\n\u003cbr\u003e\n\u003cbr\u003eFilter Structure Comparison\n\u003cbr\u003e\n\u003cbr\u003eA pleated type sports filter usually collects various sizes of dust on its surface; therefore, air passage becomes narrower which easily causes filter clogging even initial ventilation resistance is low.\n\u003cbr\u003e\n\u003cbr\u003eHKS Super Air Filter utilizes the density gradient structure where filter density becomes higher with each layer ensures all sizes of dust and other particles are caught gradually which maintains proper air passage.","brand":"HKS","offers":[{"title":"Default Title","offer_id":48684674744616,"sku":"70017-AT112","price":29.4,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/5767\/7352\/files\/hks-super-air-filter-toyota-type12-filters-810.webp?v=1750182568"},{"product_id":"hks-super-air-filter-toyota-type4","title":"HKS Super Air Filter TOYOTA type4","description":"Super Air Filter are stock replacement air filters. Featuring a newly developed dry non-woven fabric filter element for reduced airflow resistance and high dust collection capacity.\n\u003cbr\u003e\n\u003cbr\u003eNewly Developed Dry Non-woven Fabric Filter Element\n\u003cbr\u003e\n\u003cbr\u003eFeaturing a density gradient structure where the filter density becomes higher with each layer ensures all sizes of dust and other particles are caught in the most effective way. Optimising the fibre components reduces the air flow resistance.\n\u003cbr\u003e\n\u003cbr\u003eLow Resistance \u0026amp; High Dust Collection Capacity\n\u003cbr\u003e\n\u003cbr\u003eEven though the intake resistance is reduced, the dust collection capacity remains high. (Collected more than 95% dust volume during in-house testing) The Super Filter reliably captures dust to provide clean air to the engine.\n\u003cbr\u003e\n\u003cbr\u003eLong-term Low Resistance\n\u003cbr\u003e\n\u003cbr\u003eEven after long-term use of the Super Filter, the intake resistance remain as low as when new.\n\u003cbr\u003e\n\u003cbr\u003eFilter Structure Comparison\n\u003cbr\u003e\n\u003cbr\u003eA pleated type sports filter usually collects various sizes of dust on its surface; therefore, air passage becomes narrower which easily causes filter clogging even initial ventilation resistance is low.\n\u003cbr\u003e\n\u003cbr\u003eHKS Super Air Filter utilizes the density gradient structure where filter density becomes higher with each layer ensures all sizes of dust and other particles are caught gradually which maintains proper air passage.","brand":"HKS","offers":[{"title":"Default Title","offer_id":48684674777384,"sku":"70017-AT104","price":29.4,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/5767\/7352\/files\/hks-super-air-filter-toyota-type4-filters-194.webp?v=1750183239"},{"product_id":"hks-super-air-filter-toyota-type5","title":"HKS Super Air Filter TOYOTA type5","description":"Super Air Filter are stock replacement air filters. Featuring a newly developed dry non-woven fabric filter element for reduced airflow resistance and high dust collection capacity.\n\u003cbr\u003e\n\u003cbr\u003eNewly Developed Dry Non-woven Fabric Filter Element\n\u003cbr\u003e\n\u003cbr\u003eFeaturing a density gradient structure where the filter density becomes higher with each layer ensures all sizes of dust and other particles are caught in the most effective way. Optimising the fibre components reduces the air flow resistance.\n\u003cbr\u003e\n\u003cbr\u003eLow Resistance \u0026amp; High Dust Collection Capacity\n\u003cbr\u003e\n\u003cbr\u003eEven though the intake resistance is reduced, the dust collection capacity remains high. (Collected more than 95% dust volume during in-house testing) The Super Filter reliably captures dust to provide clean air to the engine.\n\u003cbr\u003e\n\u003cbr\u003eLong-term Low Resistance\n\u003cbr\u003e\n\u003cbr\u003eEven after long-term use of the Super Filter, the intake resistance remain as low as when new.\n\u003cbr\u003e\n\u003cbr\u003eFilter Structure Comparison\n\u003cbr\u003e\n\u003cbr\u003eA pleated type sports filter usually collects various sizes of dust on its surface; therefore, air passage becomes narrower which easily causes filter clogging even initial ventilation resistance is low.\n\u003cbr\u003e\n\u003cbr\u003eHKS Super Air Filter utilizes the density gradient structure where filter density becomes higher with each layer ensures all sizes of dust and other particles are caught gradually which maintains proper air passage.","brand":"HKS","offers":[{"title":"Default Title","offer_id":48684674842920,"sku":"70017-AT105","price":33.6,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/5767\/7352\/files\/hks-super-air-filter-toyota-type5-filters-447.webp?v=1750182544"},{"product_id":"hks-super-air-filter-toyota","title":"HKS Super Air Filter Toyota","description":"\u003cp\u003eHKS Super Air Filter Toyota\u003c\/p\u003e","brand":"HKS","offers":[{"title":"Default Title","offer_id":48684675432744,"sku":"70017-AT127","price":28.8,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/5767\/7352\/files\/hks-super-air-filter-toyota-filters-603.webp?v=1750182311"},{"product_id":"hks-super-air-filter-toyota-type11","title":"HKS Super Air Filter TOYOTA type11","description":"Super Air Filter are stock replacement air filters. Featuring a newly developed dry non-woven fabric filter element for reduced airflow resistance and high dust collection capacity.\n\u003cbr\u003e\n\u003cbr\u003eNewly Developed Dry Non-woven Fabric Filter Element\n\u003cbr\u003e\n\u003cbr\u003eFeaturing a density gradient structure where the filter density becomes higher with each layer ensures all sizes of dust and other particles are caught in the most effective way. Optimising the fibre components reduces the air flow resistance.\n\u003cbr\u003e\n\u003cbr\u003eLow Resistance \u0026amp; High Dust Collection Capacity\n\u003cbr\u003e\n\u003cbr\u003eEven though the intake resistance is reduced, the dust collection capacity remains high. (Collected more than 95% dust volume during in-house testing) The Super Filter reliably captures dust to provide clean air to the engine.\n\u003cbr\u003e\n\u003cbr\u003eLong-term Low Resistance\n\u003cbr\u003e\n\u003cbr\u003eEven after long-term use of the Super Filter, the intake resistance remain as low as when new.\n\u003cbr\u003e\n\u003cbr\u003eFilter Structure Comparison\n\u003cbr\u003e\n\u003cbr\u003eA pleated type sports filter usually collects various sizes of dust on its surface; therefore, air passage becomes narrower which easily causes filter clogging even initial ventilation resistance is low.\n\u003cbr\u003e\n\u003cbr\u003eHKS Super Air Filter utilizes the density gradient structure where filter density becomes higher with each layer ensures all sizes of dust and other particles are caught gradually which maintains proper air passage.","brand":"HKS","offers":[{"title":"Default Title","offer_id":48684675498280,"sku":"70017-AT111","price":29.4,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/5767\/7352\/files\/hks-super-air-filter-toyota-type11-filters-548.webp?v=1750182517"},{"product_id":"hks-super-fire-racing-m50hl-spark-plug-nissan-subaru-amp-toyota-vehicles","title":"HKS Super Fire Racing M50HL Spark Plug Nissan Subaru \u0026amp; Toyota Vehicles","description":"\u003cp\u003e\u003cstrong\u003ePlease note: This is for one spark plug only.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eUltimate spark plug \"\"M\"\". \u003cbr\u003e \u003cbr\u003eIgnitionability, durability, anti-insulation all reinforced. HKS has made the best plug for both tuning engines and stock engines. \u003cbr\u003e \u003cbr\u003eFeatures \u003cbr\u003e \u003cbr\u003e0.6mm Iridium Alloy Center Electrode \u003cbr\u003e \u003cbr\u003eIridium Alloy Center Electrode reduces voltage requirement as well as improving ignition performance and durability. \u003cbr\u003e \u003cbr\u003eOuter Electrode with Platinum Chip \u003cbr\u003e \u003cbr\u003eThe Outer Electrode incorporates a square platinum chip which improves durability, and when combined with the iridium center electrode boosts ignition performance. The Outer Electrode features a shortened tip design and tapered shape while maintaining the necessary space for proper ignition. \u003cbr\u003e \u003cbr\u003eShort Type Outer Electrode (Anti-Vibration) \u003cbr\u003e \u003cbr\u003eThe outer electrode has been shortened and engineered with the ideal shape to decrease weight for resistance against vibration. This anti-vibration design improves longevity of the outer electrode. \u003cbr\u003e \u003cbr\u003eThermal Edge \u003cbr\u003e \u003cbr\u003eAfter long idling or various combustion conditions carbon buildup can occur causing misfires. The Thermal Edge of the ceramic insulator will discharge to help decrease carbon deposits. \u003cbr\u003e \u003cbr\u003eSpark Support Gap \u003cbr\u003e \u003cbr\u003eDischarges will occur in the Spark Support Gap (space between the tip of insulator and the base of the outer electrode) to help prevent carbon buildup. \u003cbr\u003e \u003cbr\u003ePerformance and Efficiency \u003cbr\u003e \u003cbr\u003eIncreased Ignition Performance \u003cbr\u003eDecreased voltage requirement strengthens ignition performance under harsh conditions like lean mixture or high boost pressure. \u003cbr\u003e \u003cbr\u003eImproved Durability \u003cbr\u003eNew material and design improves durability, which allows for use under hard combustion conditions like continuous high load during circuit driving or aggressive tuning. \u003cbr\u003e* Improper combustion condition and wrong heat range selection might cause damage to the spark plug. \u003cbr\u003e \u003cbr\u003eDecreased Carbon Deposits \u003cbr\u003eThermal Edge and Spark Support Gap help prevent carbon buildup for better ignition under various combustion conditions. \u003cbr\u003e \u003cbr\u003eSpecial Design RE-type for Rotary Engines \u003cbr\u003e \u003cbr\u003eRotary engines reciprocating design have a different mechanism and combustion condition. RE-type spark plugs are specially designed to meet the different requirement for rotary engines. The straight shape platinum outer electrode enables reliable ignition performance.\u003c\/p\u003e\n\u003cp\u003eHeat Range Conversion Chart \u003cbr\u003e \u003cbr\u003eHKS \u003cbr\u003e \u003cbr\u003e25 \u003cbr\u003e \u003cbr\u003e30 \u003cbr\u003e \u003cbr\u003e35 \u003cbr\u003e \u003cbr\u003e40 \u003cbr\u003e \u003cbr\u003e45 \u003cbr\u003e \u003cbr\u003e50 \u003cbr\u003e \u003cbr\u003e52.5 \u003cbr\u003e \u003cbr\u003e55 \u003cbr\u003e \u003cbr\u003eDENSO \u003cbr\u003e \u003cbr\u003e16 \u003cbr\u003e \u003cbr\u003e20 \u003cbr\u003e \u003cbr\u003e22 \u003cbr\u003e \u003cbr\u003e24 \u003cbr\u003e \u003cbr\u003e27 \u003cbr\u003e \u003cbr\u003e31 \u003cbr\u003e \u003cbr\u003e32 \u003cbr\u003e \u003cbr\u003e34 \u003cbr\u003e \u003cbr\u003eNGK \u003cbr\u003e \u003cbr\u003e5 \u003cbr\u003e \u003cbr\u003e6 \u003cbr\u003e \u003cbr\u003e7 \u003cbr\u003e \u003cbr\u003e8 \u003cbr\u003e \u003cbr\u003e9 \u003cbr\u003e \u003cbr\u003e10 \u003cbr\u003e \u003cbr\u003e10.5 \u003cbr\u003e \u003cbr\u003e11 \u003cbr\u003e \u003cbr\u003e* Above information is the reference for heat resistance.\u003c\/p\u003e","brand":"HKS","offers":[{"title":"Default Title","offer_id":48684679430440,"sku":"50003-M50-HL","price":18.6,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/5767\/7352\/files\/hks-super-fire-racing-m50hl-spark-plug-nissan-subaru-toyota-vehicles-plugs-coilpacks-leads-150.webp?v=1750183227"},{"product_id":"verus-engineering-dip-stick-anodised-toyota-gr-corolla","title":"Verus Engineering Dip Stick Anodised Toyota GR Corolla 22+","description":"\u003ch5\u003e\u003cspan class=\"text-o-color-5\"\u003e\u003cstrong\u003eOVERVIEW\u003c\/strong\u003e\u003c\/span\u003e\u003c\/h5\u003e\n\u003cdiv class=\"pt8 s_hr text-start pb0\" title=\"\" data-snippet=\"s_hr\" data-name=\"Separator\" data-bs-original-title=\"\" aria-describedby=\"tooltip379857\"\u003e\u003chr class=\"mx-auto w-100\"\u003e\u003c\/div\u003e\n\u003cdiv class=\"s_hr text-start pt8 pb16\" data-snippet=\"s_hr\" data-name=\"Separator\"\u003e \u003c\/div\u003e\n\u003cp\u003e\u003cspan class=\"text-black\"\u003eReplace the boring factory dipstick handle with a unit designed, programmed, machined, anodized, and laser engraved in the United States of America! These are machined from solid aluminum in house on our 5-axis CNC mills and are offered in 3 bright dip anodized colors. These are finished off by being laser engraved in house on our fiber laser engraver. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan class=\"text-black\"\u003eInstall is straight forward and features a spring clip to ensure the handle and dip stick never separate from one another. The unit functions exactly like the OEM unit.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan class=\"text-black\"\u003e\u003cem\u003eAnodized parts can potentially fade over time due to engine bay heat.\u003c\/em\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003ch5\u003e\u003cspan class=\"text-o-color-5\"\u003e\u003cstrong\u003eWHAT IS INCLUDED\u003c\/strong\u003e\u003c\/span\u003e\u003c\/h5\u003e\n\u003cdiv class=\"pb16 pt8 s_hr text-start\" title=\"\" data-snippet=\"s_hr\" data-name=\"Separator\" data-bs-original-title=\"\" aria-describedby=\"tooltip379857\"\u003e\u003chr class=\"mx-auto w-100\"\u003e\u003c\/div\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan class=\"text-epsilon\"\u003eMachined 6061-T6 Dip Stick Handle\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003eMachined 6061-T6 Dip Stick Adapter\u003c\/li\u003e\n\u003cli\u003eHardware Kit, Includes a Spring Pin, M4 Stud, and an M3 Tightening Set Screw\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Verus","offers":[{"title":"Black","offer_id":48769977549096,"sku":"A0532A-BLK","price":64.34,"currency_code":"GBP","in_stock":true},{"title":"Blue","offer_id":48769977614632,"sku":"A0532A-BLU","price":64.34,"currency_code":"GBP","in_stock":true},{"title":"Red","offer_id":48769977680168,"sku":"A0532A-RED","price":64.34,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/5767\/7352\/files\/verus-engineering-dip-stick-anodised-toyota-gr-corolla-22-engine-bay-422.webp?v=1727172337"},{"product_id":"verus-engineering-side-splitter-kit-toyota-gr-corolla","title":"Verus Engineering Side Splitter Kit Toyota GR Corolla","description":"\u003ch5\u003e\u003cspan class=\"text-o-color-5\"\u003e\u003cstrong\u003eOVERVIEW\u003c\/strong\u003e\u003c\/span\u003e\u003c\/h5\u003e\n\u003cdiv class=\"s_hr text-start pt8 pb16\" data-snippet=\"s_hr\" data-name=\"Separator\"\u003e\u003chr class=\"w-100 mx-auto\"\u003e\u003c\/div\u003e\n\u003cp\u003e\u003cspan class=\"text-epsilon\"\u003eThe Verus Engineering Street Side Splitters are configured to be aesthetically pleasing, but functional as well.  \u003c\/span\u003eSide splitters function by keeping the high-pressure air on the top side of the Corolla which improves downforce.\u003c\/p\u003e\n\u003cp\u003e\u003cspan class=\"text-epsilon\"\u003eUtilizing state-of-the-art analysis software during the R\u0026amp;D process, we were able to ensure the side splitters perform as intended.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan class=\"text-epsilon\"\u003eDuring the design process; we utilized in-house scan data. This resulted in a product that features a near OEM fit and finish.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan class=\"text-epsilon\"\u003eThese side splitters were designed for owners looking to complete their aero package and improve the performance of the car.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch5\u003e\u003cspan class=\"text-o-color-5\"\u003e\u003cstrong\u003eWHAT IS INCLUDED\u003c\/strong\u003e\u003c\/span\u003e\u003c\/h5\u003e\n\u003cdiv class=\"s_hr text-start pt8 pb16\" data-snippet=\"s_hr\" data-name=\"Separator\"\u003e\u003chr class=\"w-100 mx-auto\"\u003e\u003c\/div\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan class=\"text-black\"\u003ePlastic Side Splitter, Left-Hand\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan class=\"text-black\"\u003ePlastic Side Splitter, Right-Hand\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan class=\"text-black\"\u003eHardware Kit, Includes All Hardware Necessary for Install\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Verus","offers":[{"title":"Default Title","offer_id":48769977909544,"sku":"A0516A","price":315.88,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/5767\/7352\/files\/verus-engineering-side-splitter-kit-toyota-gr-corolla-splitters-skirts-diffusers-700.webp?v=1718875568"},{"product_id":"verus-engineering-exhaust-cutout-cover-toyota-gr-corolla","title":"Verus Engineering Exhaust Cutout Cover Toyota GR Corolla","description":"\u003ch5\u003e\u003cspan class=\"text-o-color-5\"\u003e\u003cstrong\u003eOVERVIEW\u003c\/strong\u003e\u003c\/span\u003e\u003c\/h5\u003e\n\u003cdiv class=\"s_hr text-start pt8 pb16\" data-snippet=\"s_hr\" data-name=\"Separator\"\u003e\u003chr class=\"w-100 mx-auto\"\u003e\u003c\/div\u003e\n\u003cp\u003eA perfect addition to your GR Corolla if you are running a single exit exhaust and would like to cover the opening that no longer serves a purpose. The units are produced by FDM 3D printing from Carbon Nylon. The cover easily installs with push clips on the bumper and requires \u003cstrong\u003e*no holes to be drilled*\u003c\/strong\u003e in your vehicle!\u003c\/p\u003e\n\u003cp\u003eDuring the design process we used in house scan data to contour the external surface of the exhaust cover to match exactly that of the OE bumper. This means the fitment of the unit is unmatched and near OE.\u003c\/p\u003e\n\u003cp\u003e\u003cspan class=\"text-o-color-5\"\u003eNote: These Exhaust Cutout Covers are 3D printed out of a different material than what the rear bumper valance is comprised of. Due to this material difference, there is a slight difference in color and reflectiveness.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch5\u003e\u003cspan class=\"text-o-color-5\"\u003e\u003cstrong\u003eWHAT IS INCLUDED\u003c\/strong\u003e\u003c\/span\u003e\u003c\/h5\u003e\n\u003cdiv class=\"s_hr text-start pt8 pb16\" data-snippet=\"s_hr\" data-name=\"Separator\"\u003e\u003chr class=\"w-100 mx-auto\"\u003e\u003c\/div\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan class=\"text-epsilon\"\u003eExhaust Cutout Cover\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan class=\"text-epsilon\"\u003ePush Clips\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Verus","offers":[{"title":"Center","offer_id":48769978761512,"sku":"A0543A-CTR","price":92.47,"currency_code":"GBP","in_stock":true},{"title":"Left","offer_id":48769978892584,"sku":"A0543A-LHS","price":81.22,"currency_code":"GBP","in_stock":true},{"title":"Right","offer_id":48769979023656,"sku":"A0543A-RHS","price":81.22,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/5767\/7352\/files\/verus-engineering-exhaust-cutout-cover-toyota-gr-corolla-bumpers-body-kits-524.webp?v=1718875511"},{"product_id":"works-bell-rapfix-short-steering-wheel-boss-toyota-gr-yaris-corolla-20","title":"Works Bell Rapfix 72mm Short Steering Wheel Boss Toyota GR Yaris Corolla 20+","description":"\u003cdiv\u003eWorks Bell of Japan created this short boss steering wheel hub especially for use with their popular Rapfix Quick Release Adapter. Great combo to keep extension minimal. This can also be used to mount a \u003ca href=\"https:\/\/www.tegiwa.com\/products\/zestek-oem-racing-steering-wheel-hub-toyota-gr-yaris?variant=48486149292328\"\u003e\u003cstrong\u003eZestek Steering Wheel Hub\u003c\/strong\u003e\u003c\/a\u003e too.\u003c\/div\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cmeta charset=\"utf-8\"\u003e \u003cstrong\u003e\u003cspan\u003eNOTE: Torque spec is 30N - m (23 ft\/lbs)\u003c\/span\u003e\u003c\/strong\u003e\n\u003c\/div\u003e","brand":"Works Bell","offers":[{"title":"Default Title","offer_id":49020704915752,"sku":"WB-550S","price":162.28,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/5767\/7352\/files\/works-bell-rapfix-72mm-short-steering-wheel-boss-toyota-gr-yaris-corolla-20-kits-498.webp?v=1722505090"},{"product_id":"genuine-toyota-flywheel-bolts-gr-yaris-corolla-g16e-gts-20","title":"Genuine Toyota Flywheel Bolts GR Yaris Corolla G16E-GTS 20+","description":"\u003cp\u003eToyota Flywheel Bolts. It is good practice to change these when changing your flywheel and as with all genuine Honda products expect a perfect fit and performance every time. Please note that these are sold as a pack of 8.\u003c\/p\u003e","brand":"Genuine Toyota","offers":[{"title":"Default Title","offer_id":49024798425384,"sku":"90110-12018-8","price":24.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/5767\/7352\/files\/genuine-toyota-flywheel-bolts-gr-yaris-corolla-g16e-gts-20-clutch-982.webp?v=1722613931"},{"product_id":"verus-engineering-anodized-engine-bay-cap-kit-toyota-gr-corolla","title":"Verus Engineering Anodized Engine Bay Cap Kit Toyota GR Corolla","description":"\u003cp\u003eOVERVIEW\u003c\/p\u003e\n\n\u003cp\u003eReceive a discount by ordering all the engine bay caps together! Cover up and replace the lackluster plastic caps that come on your factory Toyota GR Corolla with caps machined from solid aluminum.  The caps are machined in house and offered in three common colors to add color to the engine bay.  The units install easily within minutes with simple hand tools.\u003c\/p\u003e\n\n\u003cp\u003eWHAT IS INCLUDED\u003c\/p\u003e\n\n\u003cp\u003e(1) Coolant Overflow Cap Cover\n\u003cbr\u003e(1) FHS or RLA Oil Cap, Replacement\n\u003cbr\u003e(1) Windshield Washer Cap, Replacement\n\u003cbr\u003e(1) Brake Master Cap Cover\n\u003cbr\u003e(1) A\/C Cap Set, Replacement \n\u003cbr\u003e(1) Coolant Bleed Screw, Replacement\u003c\/p\u003e","brand":"Verus","offers":[{"title":"RLA \/ Black","offer_id":49111235232040,"sku":"A0687A-BLK-RLA","price":230.07,"currency_code":"GBP","in_stock":true},{"title":"RLA \/ Blue","offer_id":49111235330344,"sku":"A0687A-BLU-RLA","price":230.07,"currency_code":"GBP","in_stock":true},{"title":"RLA \/ Red","offer_id":49111235428648,"sku":"A0687A-RED-RLA","price":230.07,"currency_code":"GBP","in_stock":true},{"title":"FHS \/ Black","offer_id":49111235559720,"sku":"A0687A-BLK-FHS","price":230.07,"currency_code":"GBP","in_stock":true},{"title":"FHS \/ Blue","offer_id":49111235658024,"sku":"A0687A-BLU-FHS","price":230.07,"currency_code":"GBP","in_stock":true},{"title":"FHS \/ Red","offer_id":49111235821864,"sku":"A0687A-RED-FHS","price":230.07,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/5767\/7352\/files\/verus-engineering-anodized-engine-bay-cap-kit-toyota-gr-corolla-983.webp?v=1751551207"},{"product_id":"verus-engineering-anodized-throttle-pedal-spacer-toyota-gr-corolla","title":"Verus Engineering Anodized Throttle Pedal Spacer Toyota GR Corolla","description":"\u003cp\u003eOVERVIEW\u003c\/p\u003e\n\n\u003cp\u003eThe Verus Engineering Throttle Pedal Spacer improves your driving experience with easier heel-toe downshifting.  This is a great addition to cars with stiff brake pedals from BBK, stainless braided lines, or if you have a hard time heel-toe downshifting in stock format.\u003c\/p\u003e\n\n\u003cp\u003eWe moved the throttle pedal 15mm closer to the brake pedal, towards the driver 27mm, and vertically +\/- 10.0mm from stock.\u003c\/p\u003e\n\n\u003cp\u003eBy doing so, our throttle pedal spacer allows you to fine-tune where you want your throttle pedal to be placed for the best driving experience possible.\u003c\/p\u003e\n\n\u003cp\u003eAlso fits manual 2019+ SE and XSE models.\u003c\/p\u003e\n\n\u003cp\u003e*LHD vehicles only*\u003c\/p\u003e\n\n\u003cp\u003eWHAT IS INCLUDED\u003c\/p\u003e\n\n\u003cp\u003eThrottle Pedal Spacer\n\u003cbr\u003eHardware Kit, Includes All Necessary Hardware for Install\u003c\/p\u003e","brand":"Verus","offers":[{"title":"Black","offer_id":49111235920168,"sku":"A0650A-BLK","price":151.29,"currency_code":"GBP","in_stock":true},{"title":"Blue","offer_id":49111235985704,"sku":"A0650A-BLU","price":151.29,"currency_code":"GBP","in_stock":true},{"title":"Red","offer_id":49111236018472,"sku":"A0650A-RED","price":151.29,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/5767\/7352\/files\/verus-engineering-anodized-throttle-pedal-spacer-toyota-gr-corolla-gaskets-fittings-adapters-416.webp?v=1724154285"},{"product_id":"verus-engineering-anodized-coolant-bleed-screw-toyota-gr-corolla","title":"Verus Engineering Anodized Coolant Bleed Screw Toyota GR Corolla","description":"\u003cp\u003eOVERVIEW\u003c\/p\u003e\n\n\u003cp\u003eReplace that boring plastic bleed screw that comes from the factory with a unit machined from solid aluminum and bright anodized your favorite color.  The units install easily within minutes with simple handle tools\u003c\/p\u003e\n\n\u003cp\u003eWHAT IS INCLUDED\u003c\/p\u003e\n\n\u003cp\u003eCoolant Bleed Screw, Anodized 6061-T6 Aluminum\u003c\/p\u003e","brand":"Verus","offers":[{"title":"Black","offer_id":49111236378920,"sku":"A0664A-BLK","price":24.95,"currency_code":"GBP","in_stock":true},{"title":"Blue","offer_id":49111236477224,"sku":"A0664A-BLU","price":24.95,"currency_code":"GBP","in_stock":true},{"title":"Red","offer_id":49111236575528,"sku":"A0664A-RED","price":24.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/5767\/7352\/files\/verus-engineering-anodized-coolant-bleed-screw-toyota-gr-corolla-engine-bay-296.webp?v=1724154273"},{"product_id":"verus-engineering-anodized-brake-master-cylinder-brace-toyota-gr-corolla","title":"Verus Engineering Anodized Brake Master Cylinder Brace Toyota GR Corolla","description":"\u003cp\u003eOVERVIEW\u003c\/p\u003e\n\n\u003cp\u003eThe Toyota GR Corolla platforms suffer from a common issue in streetcars, brake master cylinder flex.  This is due to the thin sheet metal in the firewall flexing while pressing on the brake pedal.  While on track and on the street, this leads to a vague feeling in the brake pedal.   We developed this kit to fix the issue by dramatically reducing this movement.\u003c\/p\u003e\n\n\u003cp\u003eThis is a great addition to your Toyota GR Corolla if you track the car or want an improved brake pedal feel.  We saw a reduction in deflection of ~63% with the use of our brace compared to OEM.\n\u003cbr\u003e*Disclaimer: This product currently only fits with Left Hand Drive models.*\u003c\/p\u003e\n\n\u003cp\u003eWHAT IS INCLUDED\u003c\/p\u003e\n\n\u003cp\u003eMachined 6061-T6 Aluminum Brace\n\u003cbr\u003eMachined 303 Stainless Adjuster\n\u003cbr\u003eMachined 6061-T6 Aluminum Foot\n\u003cbr\u003eHardware Kit, Includes All Necessary Hardware for a Seamless Install\u003c\/p\u003e","brand":"Verus","offers":[{"title":"Black","offer_id":49111236051240,"sku":"A0651A-BLK","price":117.53,"currency_code":"GBP","in_stock":true},{"title":"Blue","offer_id":49111236182312,"sku":"A0651A-BLU","price":117.53,"currency_code":"GBP","in_stock":true},{"title":"Red","offer_id":49288271003944,"sku":"A0651A-RED","price":117.53,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/5767\/7352\/files\/verus-engineering-anodized-brake-master-cylinder-brace-toyota-gr-corolla-blue-parts-and-accessories-414.webp?v=1724154309"},{"product_id":"verus-engineering-anodized-full-car-cap-kit-toyota-gr-corolla","title":"Verus Engineering Anodized Full Car Cap Kit Toyota GR Corolla","description":"\u003cp\u003eOVERVIEW\u003c\/p\u003e\n\n\u003cp\u003eReceive a discount by ordering the full car cap kit! Cover up the lackluster plastic caps that come on your factory Toyota GR Corolla with a cap machined in house from solid aluminum. The caps are offered in three common colors to add color to the engine bay.  The units install easily within minutes with no tools required. \u003c\/p\u003e\n\n\u003cp\u003eWHAT IS INCLUDED\u003c\/p\u003e\n\n\u003cp\u003e(1) Coolant Overflow Cap Cover\n\u003cbr\u003e(1) FHS or RLA Oil Cap, Replacement\n\u003cbr\u003e(1) Windshield Washer Cap, Replacement\n\u003cbr\u003e(1) Brake Master Cap Cover\n\u003cbr\u003e(1) A\/C Cap Set, Replacement \n\u003cbr\u003e(1) Coolant Bleed Screw, Replacement\n\u003cbr\u003e(1) Gas Cap Cover\u003c\/p\u003e","brand":"Verus","offers":[{"title":"RLA \/ Black","offer_id":49111236149544,"sku":"A0688A-BLK-RLA","price":283.2,"currency_code":"GBP","in_stock":true},{"title":"RLA \/ Blue","offer_id":49111236346152,"sku":"A0688A-BLU-RLA","price":283.2,"currency_code":"GBP","in_stock":true},{"title":"RLA \/ Red","offer_id":49111236411688,"sku":"A0688A-RED-RLA","price":283.2,"currency_code":"GBP","in_stock":true},{"title":"FHS \/ Black","offer_id":49111236542760,"sku":"A0688A-BLK-FHS","price":283.2,"currency_code":"GBP","in_stock":true},{"title":"FHS \/ Blue","offer_id":49111236608296,"sku":"A0688A-BLU-FHS","price":283.2,"currency_code":"GBP","in_stock":true},{"title":"FHS \/ Red","offer_id":49111236641064,"sku":"A0688A-RED-FHS","price":283.2,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/5767\/7352\/files\/verus-engineering-anodized-full-car-cap-kit-toyota-gr-corolla-rla-black-engine-bay-942.webp?v=1724154262"},{"product_id":"genuine-toyota-clutch-flywheel-gr-yaris-corolla-g16e-gts-20","title":"Genuine Toyota Clutch Flywheel GR Corolla 23+","description":"\u003cp\u003eToyota Flywheel. \u003cmeta charset=\"utf-8\"\u003e\u003cspan\u003eAs with all genuine Toyota parts expect perfect fit and performance every time. Part number: 13450-18021\u003c\/span\u003e\u003c\/p\u003e","brand":"Genuine Toyota","offers":[{"title":"Default Title","offer_id":49117496934696,"sku":"13450-18021","price":671.15,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/5767\/7352\/files\/genuine-toyota-clutch-flywheel-gr-corolla-23-951.webp?v=1750272725"}],"url":"https:\/\/www.tegiwa.com\/collections\/toyota-gr-corolla-gearbox-differential-clutch-flywheel-drivetrain-upgrades.oembed","provider":"Tegiwa","version":"1.0","type":"link"}