{"title":"Renault Megane RS 300 Gearbox, Differential, Clutch, Flywheel \u0026 Drivetrain Upgrades","description":null,"products":[{"product_id":"hel-performance-carbon-fibre-brake-shims-renault-megane-iv-1-8-rs-300-and-rs-trophy-tce-280-17-front","title":"HEL Performance Carbon Fibre Brake Shims Renault Megane IV 1.8 RS 300 and RS Trophy TCe 280 17+ Front","description":"\u003cp\u003eHEL Performance have pulled out all the stops when developing their carbon fibre brake pad shims. They've used the finest carbon fibre, combined with an exclusive resin which is non-combustible and thermally resistant to temperatures over 400°C (752°F). This special resin cures an attractive yellow or orange depending on the batch.\u003c\/p\u003e\n\u003cp\u003eThese don't just look the part though: initial testing carried out by a professional racing driver in various road and track conditions showed a \u003cstrong\u003ehuge average temperature drop of 49°C (120.2°F)\u003c\/strong\u003e on the front calipers.\u003c\/p\u003e\n\u003cp\u003eHEL carbon fibre shims come in at a super-lightweight 3.5 grams per shim, compared to weighty titanium which are a typical 17 grams per shim. \u003cstrong\u003eThat's a dramatic 79% weight saving\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003eThat's not the only comparison which makes titanium inferior though: carbon fibre also has a much lower heat conduction compared to titanium (1W\/mK compared to 22W\/mK for titanium and 65W\/mK for steel). Anything that helps reduce the temperature and increase efficiency of brake components is a good thing, especially as caliper seals are at risk of being damaged when they get too hot.\u003c\/p\u003e\n\u003cp\u003eInstalling these carbon fibre brake pad shims will certainly inspire confidence that when you brake aggressively, all the components are being kept cool and working at their best.\u003c\/p\u003e\n\u003cp\u003eYou can also re-use the shims when changing pads, as long as they're in a good condition.\u003c\/p\u003e\n\u003ctable\u003e\n\u003ccaption\u003eCaliper Temperatures\u003c\/caption\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003ctd\u003e \u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003eStandard\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003eHEL Carbon Fibre Shims\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003eDifference\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eFront Right\u003c\/td\u003e\n\u003ctd\u003e217.8°C\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003e165.6°C\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003e↓  52.2°C (24%)\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFront Left\u003c\/td\u003e\n\u003ctd\u003e224.8°C\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003e178.9°C\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003e↓  45.9°C (20.4%)\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRear Right\u003c\/td\u003e\n\u003ctd\u003e138.9°C\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003e116.6°C\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003e↓  22.3°C (16.1%)\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRear Left\u003c\/td\u003e\n\u003ctd\u003e131.1°C\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003e113.3°C\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003e↓  17.8°C (13.6%)\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"HEL","offers":[{"title":"Default Title","offer_id":47263828607272,"sku":"HEL-HCFS-2-025","price":132.29,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/5767\/7352\/files\/hel-performance-carbon-fibre-brake-shims-renault-megane-iv-1-8-rs-300-and-trophy-tce-280-17-front-pads-354.webp?v=1744989792"},{"product_id":"hel-performance-carbon-fibre-brake-shims-renault-megane-rs-tcr-18-front","title":"HEL Performance Carbon Fibre Brake Shims Renault Megane RS TCR 18 Front","description":"\u003cp\u003eHEL Performance have pulled out all the stops when developing their carbon fibre brake pad shims. They've used the finest carbon fibre, combined with an exclusive resin which is non-combustible and thermally resistant to temperatures over 400°C (752°F). This special resin cures an attractive yellow or orange depending on the batch.\u003c\/p\u003e\n\u003cp\u003eThese don't just look the part though: initial testing carried out by a professional racing driver in various road and track conditions showed a \u003cstrong\u003ehuge average temperature drop of 49°C (120.2°F)\u003c\/strong\u003e on the front calipers.\u003c\/p\u003e\n\u003cp\u003eHEL carbon fibre shims come in at a super-lightweight 3.5 grams per shim, compared to weighty titanium which are a typical 17 grams per shim. \u003cstrong\u003eThat's a dramatic 79% weight saving\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003eThat's not the only comparison which makes titanium inferior though: carbon fibre also has a much lower heat conduction compared to titanium (1W\/mK compared to 22W\/mK for titanium and 65W\/mK for steel). Anything that helps reduce the temperature and increase efficiency of brake components is a good thing, especially as caliper seals are at risk of being damaged when they get too hot.\u003c\/p\u003e\n\u003cp\u003eInstalling these carbon fibre brake pad shims will certainly inspire confidence that when you brake aggressively, all the components are being kept cool and working at their best.\u003c\/p\u003e\n\u003cp\u003eYou can also re-use the shims when changing pads, as long as they're in a good condition.\u003c\/p\u003e\n\u003ctable\u003e\n\u003ccaption\u003eCaliper Temperatures\u003c\/caption\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003ctd\u003e \u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003eStandard\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003eHEL Carbon Fibre Shims\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003eDifference\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eFront Right\u003c\/td\u003e\n\u003ctd\u003e217.8°C\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003e165.6°C\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003e↓  52.2°C (24%)\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFront Left\u003c\/td\u003e\n\u003ctd\u003e224.8°C\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003e178.9°C\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003e↓  45.9°C (20.4%)\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRear Right\u003c\/td\u003e\n\u003ctd\u003e138.9°C\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003e116.6°C\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003e↓  22.3°C (16.1%)\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRear Left\u003c\/td\u003e\n\u003ctd\u003e131.1°C\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003e113.3°C\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003e↓  17.8°C (13.6%)\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"HEL","offers":[{"title":"Default Title","offer_id":47263828640040,"sku":"HEL-HCFS-4-039","price":132.29,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/5767\/7352\/files\/hel-performance-carbon-fibre-brake-shims-renault-megane-rs-tcr-18-front-pads-147.webp?v=1744989521"},{"product_id":"hel-braided-brake-lines-renault-megane-iv-1-8-rs-300-trophy-280-cup-models-18","title":"HEL Braided Brake Lines Renault Megane IV 1.8 RS 300 Trophy 280 Cup Models 18+","description":"\u003cp\u003e\u003cstrong\u003eIMAGES ARE FOR ILLUSTRATIVE PURPOSES ONLY\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eHEL Brake Lines eliminate the risk of unreliable brakes, giving you premium quality brake performance at the same time. Incredible value for money for premium quality braided brake lines. These are braided brake lines you can 100% trust in any type of car. Your braking will feel smoother and stronger. That ‘spongy’ brake feeling will be eliminated, making your brakes crisp and responsive. \u003cbr\u003e\u003cbr\u003e- The highest quality, 100% stainless steel, non-corroding braided brake lines.\u003cbr\u003e- Covered With A Lifetime Warranty As Standard.\u003cbr\u003e- FMVSS-106, ADR, LTSA, DOT and TUV approved.\u003cbr\u003e- So reliable that they’re used in many high performance, racing and custom cars.\u003cbr\u003e- Coated in a wipe-clean PVC cover.\u003c\/p\u003e","brand":"HEL","offers":[{"title":"Default Title","offer_id":47264212910376,"sku":"HEL-REN-6-318","price":179.4,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/5767\/7352\/files\/hel-braided-brake-lines-renault-megane-iv-1-8-rs-300-trophy-280-cup-models-18-270.webp?v=1745067116"},{"product_id":"kap-industries-fire-extinguisher-bracket-renault-megane-mk4","title":"Kap Industries Fire Extinguisher Bracket RENAULT MEGANE MK4","description":"\u003cp\u003eThis Fire Extinguisher Mount bolts straight into the Renault Megane 4.\u003c\/p\u003e\n\u003cp\u003eMade from 3mm Steel and Powder Coated Black. The bracket has a series of slots so no drilling is required. It’s a 5 minute install!\u003c\/p\u003e\n\u003cp\u003eIf you want one for both sides of your car, just add 2 in your cart!\u003c\/p\u003e\n\u003cp\u003eThe seat bolt is a special Torx T40. You can buy one from our site!\u003c\/p\u003e\n\u003cp\u003eEvery Kap Industries Bracket is made specifically to each vehicle model, designed to bolt in, without having to drill into the vehicle’s bodywork.\u003c\/p\u003e\n\u003cp\u003eDesigned in CAD, laser cut from lightweight steel and powder coated, each bracket fits perfectly.\u003c\/p\u003e\n\u003cp\u003eIf you are a very short driver please install on the Passenger side as it will limit forward seat movement by about 30mm.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eEvery Purchase Includes:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1 x Renault Megane 4 Fire Extinguisher Bracket\u003c\/li\u003e\n\u003cli\u003e2 x M5 Stainless Steel Locknuts\u003c\/li\u003e\n\u003cli\u003e2 x M5 Stainless Hex Bolts\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePlease Note:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSeat bolts are easily cross threaded.\u003c\/li\u003e\n\u003cli\u003eKap Industries Brackets are only to be used with metal strapped extinguisher cages.\u003c\/li\u003e\n\u003cli\u003ePlease be careful when installing. Kap Industries takes no responsibility for incorrect install.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eBolts are supplied with all brackets to attach an extinguisher cage but a retaining strap is only included when the bracket is purchased WITH a fire extinguisher.\u003c\/strong\u003e\u003c\/p\u003e","brand":"Kap Industries","offers":[{"title":"Without Extinguisher","offer_id":47432307015976,"sku":"KAP-MEGANEMK4","price":35.0,"currency_code":"GBP","in_stock":true},{"title":"With Fire Extinguisher","offer_id":47432307048744,"sku":"KAP-MEGANEMK4-EXT","price":70.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/5767\/7352\/files\/kap-industries-fire-extinguisher-bracket-renault-megane-mk4-without-extinguishers-142.webp?v=1749080425"},{"product_id":"hawk-performance-blue-9012-motorsports-brake-pads-front-hb453e-585","title":"HAWK Performance Blue 9012 Motorsports Brake Pads Front - HB453E.585","description":"\u003cdiv\u003e\n\u003cp\u003eDesigned as an entry level endurance compound, there's nothing second-string about Hawk's Blue 9012 race compound. Easier to bed in and delivering excellent pad and rotor life, Blue 9012 is a medium torque pad developed specifically for Road, Rally and Circle Track racing.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003eEndurance Compound\u003c\/li\u003e\n\u003cli\u003eMedium Friction\u003c\/li\u003e\n\u003cli\u003eIntermediate Initial Bite\u003c\/li\u003e\n\u003cli\u003eIncreased Mid-Mu Characteristics\u003c\/li\u003e\n\u003cli\u003e250-1000 Deg F Operating Temperature Range\u003c\/li\u003e\n\u003cli\u003e350-800 Deg F Optimal Temperature Range\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003ch3\u003eHawk Brake Pad Installation Procedure\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eInstall Brake pads properly. Be sure pads are securely positioned in the caliper.\u003c\/li\u003e\n\u003cli\u003eFlush system with fresh brake fluid.\u003c\/li\u003e\n\u003cli\u003eCheck all hydraulic parts for excess wear and tear.\u003c\/li\u003e\n\u003cli\u003eCheck disc for proper thickness, parallelism, and lateral run-out.\u003c\/li\u003e\n\u003cli\u003eCheck disc for scoring or grooves over .012\"\" depth. If either applies, resurfacing or replacement is required.\u003c\/li\u003e\n\u003cli\u003eIf disc does not need resurfacing then contamination from the previous brake pads must be removed. Sand discs with Garnet sandpaper using moderate pressure. Use soap and water to clean off disc surface after sanding and machining. Discs should be free and clear of oil, grease, and brake fluid\u003c\/li\u003e\n\u003cli\u003eInspect calipers for freedom of movement. Lubricate where necessary\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eHawk Brake Pad Bedding Procedure - Motorsports Pads\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAfter reaching medium speed engage brake pedal to slow car without coming to a complete stop. Release pedal quickly and do not drag brakes. Repeat four or five times.\u003c\/li\u003e\n\u003cli\u003eAt higher speeds engage brake pedal to slow car without coming to a complete stop. Release pedal quickly and do not drag brakes. Repeat five times.\u003c\/li\u003e\n\u003cli\u003eAt or near race speed engage brake pedal to slow car without coming to a complete stop. Release pedal quickly and do not drag brakes. Repeat three times. Allow a few seconds between brake engagements while car is in motion.\u003c\/li\u003e\n\u003cli\u003eDo not hold brake pedal. Park car for approximately 20 minutes or until brake rotors are completely cool to the touch.\u003c\/li\u003e\n\u003cli\u003eIf during the above steps the brake pedal becomes soft or brake fade is noticed, park the car immediately for approximately 20 minutes. Do not hold brake pedal.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eImportant Reminders when Burnishing or Bedding Brake Pads\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eDo not attempt to use badly worn or damaged rotors with new brake pads.\u003c\/li\u003e\n\u003cli\u003eDo not drag brakes while car is moving during break-in procedure.\u003c\/li\u003e\n\u003cli\u003eDo not engage pedal while car is stopped at any time following the break-in procedure.\u003c\/li\u003e\n\u003cli\u003eUpon completing the procedure, allow the brake system to completely cool before racing.\u003c\/li\u003e\n\u003cli\u003eApplying the pedal a few times before the start of the race will allow the brake pads to heat up before attempting to reach race speeds.\u003c\/li\u003e\n\u003cli\u003eClean a used rotor surface with fine sand paper or steel wool, rinse with water, dry and install before bedding new pads.\u003c\/li\u003e\n\u003cli\u003eSome forms of racing do not allow time for the proper break-in procedure to be performed. However, it is still very important to attempt to perform at least the core of the procedure: Build up heat slowly and allow the system to completely cool down before racing if possible.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eLimited Lifetime Warranty\u003c\/h3\u003e\n\u003cp\u003eCarlisle Brake \u0026amp; Friction (CBF) warrants Hawk Performance branded products to be free of defects from workmanship and materials. This warranty does not apply to normal wear or damage caused by negligence, lack of maintenance, accident, abnormal operations, or improper installation or service. CBF does not make any other warranty claims, either expressed or implied, including the implied warranties of merchantability or fitness for a particular purpose. In no event will CBF\/Hawk Performance be liable for incidental or consequential damages of any kind, whether such damages are claimed on account of breach of warranty, breach of contract, negligence, or strict product liability. This includes without limitation, damage to property, or other economic losses that may be incurred. Any, and all, warranty claims must be processed through CBF. All valid warranty claims will be replaced and\/or reimbursed with Hawk Performance branded products of equal or greater value.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e* Disclaimer to Limited Life-Time Warranty: Motorsports brake pads and rotors are developed for high performance events. Racing is a dangerous sport. Hawk Performance racing brake pads and rotors are sold without warranty expressed or implied. No warranty or representation is made as to this products ability to protect the user from injury or death. The user assumes that risk.\u003c\/strong\u003e\u003c\/p\u003e","brand":"HAWK Performance","offers":[{"title":"Default Title","offer_id":47780264608040,"sku":"HWK-HB453E.585","price":276.26,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/5767\/7352\/files\/hawk-performance-blue-9012-motorsports-brake-pads-front-hb453e-585-672.webp?v=1716840028"},{"product_id":"hawk-performance-blue-9012-motorsports-brake-pads-rear-hb364e-587","title":"HAWK Performance Blue 9012 Motorsports Brake Pads Rear - HB364E.587","description":"\u003cdiv\u003e\n\u003cp\u003eDesigned as an entry level endurance compound, there's nothing second-string about Hawk's Blue 9012 race compound. Easier to bed in and delivering excellent pad and rotor life, Blue 9012 is a medium torque pad developed specifically for Road, Rally and Circle Track racing.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003eEndurance Compound\u003c\/li\u003e\n\u003cli\u003eMedium Friction\u003c\/li\u003e\n\u003cli\u003eIntermediate Initial Bite\u003c\/li\u003e\n\u003cli\u003eIncreased Mid-Mu Characteristics\u003c\/li\u003e\n\u003cli\u003e250-1000 Deg F Operating Temperature Range\u003c\/li\u003e\n\u003cli\u003e350-800 Deg F Optimal Temperature Range\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003ch3\u003eHawk Brake Pad Installation Procedure\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eInstall Brake pads properly. Be sure pads are securely positioned in the caliper.\u003c\/li\u003e\n\u003cli\u003eFlush system with fresh brake fluid.\u003c\/li\u003e\n\u003cli\u003eCheck all hydraulic parts for excess wear and tear.\u003c\/li\u003e\n\u003cli\u003eCheck disc for proper thickness, parallelism, and lateral run-out.\u003c\/li\u003e\n\u003cli\u003eCheck disc for scoring or grooves over .012\"\" depth. If either applies, resurfacing or replacement is required.\u003c\/li\u003e\n\u003cli\u003eIf disc does not need resurfacing then contamination from the previous brake pads must be removed. Sand discs with Garnet sandpaper using moderate pressure. Use soap and water to clean off disc surface after sanding and machining. Discs should be free and clear of oil, grease, and brake fluid\u003c\/li\u003e\n\u003cli\u003eInspect calipers for freedom of movement. Lubricate where necessary\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eHawk Brake Pad Bedding Procedure - Motorsports Pads\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAfter reaching medium speed engage brake pedal to slow car without coming to a complete stop. Release pedal quickly and do not drag brakes. Repeat four or five times.\u003c\/li\u003e\n\u003cli\u003eAt higher speeds engage brake pedal to slow car without coming to a complete stop. Release pedal quickly and do not drag brakes. Repeat five times.\u003c\/li\u003e\n\u003cli\u003eAt or near race speed engage brake pedal to slow car without coming to a complete stop. Release pedal quickly and do not drag brakes. Repeat three times. Allow a few seconds between brake engagements while car is in motion.\u003c\/li\u003e\n\u003cli\u003eDo not hold brake pedal. Park car for approximately 20 minutes or until brake rotors are completely cool to the touch.\u003c\/li\u003e\n\u003cli\u003eIf during the above steps the brake pedal becomes soft or brake fade is noticed, park the car immediately for approximately 20 minutes. Do not hold brake pedal.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eImportant Reminders when Burnishing or Bedding Brake Pads\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eDo not attempt to use badly worn or damaged rotors with new brake pads.\u003c\/li\u003e\n\u003cli\u003eDo not drag brakes while car is moving during break-in procedure.\u003c\/li\u003e\n\u003cli\u003eDo not engage pedal while car is stopped at any time following the break-in procedure.\u003c\/li\u003e\n\u003cli\u003eUpon completing the procedure, allow the brake system to completely cool before racing.\u003c\/li\u003e\n\u003cli\u003eApplying the pedal a few times before the start of the race will allow the brake pads to heat up before attempting to reach race speeds.\u003c\/li\u003e\n\u003cli\u003eClean a used rotor surface with fine sand paper or steel wool, rinse with water, dry and install before bedding new pads.\u003c\/li\u003e\n\u003cli\u003eSome forms of racing do not allow time for the proper break-in procedure to be performed. However, it is still very important to attempt to perform at least the core of the procedure: Build up heat slowly and allow the system to completely cool down before racing if possible.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eLimited Lifetime Warranty\u003c\/h3\u003e\n\u003cp\u003eCarlisle Brake \u0026amp; Friction (CBF) warrants Hawk Performance branded products to be free of defects from workmanship and materials. This warranty does not apply to normal wear or damage caused by negligence, lack of maintenance, accident, abnormal operations, or improper installation or service. CBF does not make any other warranty claims, either expressed or implied, including the implied warranties of merchantability or fitness for a particular purpose. In no event will CBF\/Hawk Performance be liable for incidental or consequential damages of any kind, whether such damages are claimed on account of breach of warranty, breach of contract, negligence, or strict product liability. This includes without limitation, damage to property, or other economic losses that may be incurred. Any, and all, warranty claims must be processed through CBF. All valid warranty claims will be replaced and\/or reimbursed with Hawk Performance branded products of equal or greater value.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e* Disclaimer to Limited Life-Time Warranty: Motorsports brake pads and rotors are developed for high performance events. Racing is a dangerous sport. Hawk Performance racing brake pads and rotors are sold without warranty expressed or implied. No warranty or representation is made as to this products ability to protect the user from injury or death. The user assumes that risk.\u003c\/strong\u003e\u003c\/p\u003e","brand":"HAWK Performance","offers":[{"title":"Default Title","offer_id":47780268867880,"sku":"HWK-HB364E.587","price":193.1,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/5767\/7352\/files\/hawk-performance-blue-9012-motorsports-brake-pads-rear-hb364e-587-376.webp?v=1716841122"},{"product_id":"hawk-performance-dtc-30-motorsports-brake-pads-front-hb453w-585","title":"HAWK Performance DTC-30 Motorsports Brake Pads Front - HB453W.585","description":"\u003cdiv\u003e\n\u003cp\u003eDTC-30 is a controllable torque, multi-purpose compound, proven effective in a range of series. It delivers superior release characteristics and smooth pedal feel and initial bite for dirt and circle tracks, NASCAR modified, drag racing, trophy trucks, pro buggies, and more.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cp\u003eIn addition to the applications mentioned above, the DTC-30 compound is often used on the rear axle of smaller race vehicles. Competitive racers of the Miata or S2000 will often choose DTC-30 for the rear axle paired with DTC-60 on the front. DTC-30 will also find itself on both axles of street driven vehicles when braking performance is top priority and owner is willing to sacrifice cleanliness and lack of brake noise.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003eConsistent, Smooth Braking\u003c\/li\u003e\n\u003cli\u003eEffective when Cold\u003c\/li\u003e\n\u003cli\u003e100-1200 Deg F Operating Temperature Range\u003c\/li\u003e\n\u003cli\u003e100-800 Deg F Optimal Temperature Range\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eFor motorsport use only. Image is for illustative purposes, actual product may differ.\u003c\/p\u003e\n\u003ch3\u003eHawk Brake Pad Installation Procedure\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eInstall Brake pads properly. Be sure pads are securely positioned in the caliper.\u003c\/li\u003e\n\u003cli\u003eFlush system with fresh brake fluid.\u003c\/li\u003e\n\u003cli\u003eCheck all hydraulic parts for excess wear and tear.\u003c\/li\u003e\n\u003cli\u003eCheck disc for proper thickness, parallelism, and lateral run-out.\u003c\/li\u003e\n\u003cli\u003eCheck disc for scoring or grooves over .012\"\" depth. If either applies, resurfacing or replacement is required.\u003c\/li\u003e\n\u003cli\u003eIf disc does not need resurfacing then contamination from the previous brake pads must be removed. Sand discs with Garnet sandpaper using moderate pressure. Use soap and water to clean off disc surface after sanding and machining. Discs should be free and clear of oil, grease, and brake fluid\u003c\/li\u003e\n\u003cli\u003eInspect calipers for freedom of movement. Lubricate where necessary\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eHawk Brake Pad Bedding Procedure - Motorsports Pads\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAfter reaching medium speed engage brake pedal to slow car without coming to a complete stop. Release pedal quickly and do not drag brakes. Repeat four or five times.\u003c\/li\u003e\n\u003cli\u003eAt higher speeds engage brake pedal to slow car without coming to a complete stop. Release pedal quickly and do not drag brakes. Repeat five times.\u003c\/li\u003e\n\u003cli\u003eAt or near race speed engage brake pedal to slow car without coming to a complete stop. Release pedal quickly and do not drag brakes. Repeat three times. Allow a few seconds between brake engagements while car is in motion.\u003c\/li\u003e\n\u003cli\u003eDo not hold brake pedal. Park car for approximately 20 minutes or until brake rotors are completely cool to the touch.\u003c\/li\u003e\n\u003cli\u003eIf during the above steps the brake pedal becomes soft or brake fade is noticed, park the car immediately for approximately 20 minutes. Do not hold brake pedal.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eImportant Reminders when Burnishing or Bedding Brake Pads\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eDo not attempt to use badly worn or damaged rotors with new brake pads.\u003c\/li\u003e\n\u003cli\u003eDo not drag brakes while car is moving during break-in procedure.\u003c\/li\u003e\n\u003cli\u003eDo not engage pedal while car is stopped at any time following the break-in procedure.\u003c\/li\u003e\n\u003cli\u003eUpon completing the procedure, allow the brake system to completely cool before racing.\u003c\/li\u003e\n\u003cli\u003eApplying the pedal a few times before the start of the race will allow the brake pads to heat up before attempting to reach race speeds.\u003c\/li\u003e\nli\u0026gt;Clean a used rotor surface with fine sand paper or steel wool, rinse with water, dry and install before bedding new pads\n\u003cli\u003eSome forms of racing do not allow time for the proper break-in procedure to be performed. However, it is still very important to attempt to perform at least the core of the procedure: Build up heat slowly and allow the system to completely cool down before racing if possible.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eLimited Lifetime Warranty\u003c\/h3\u003e\n\u003cp\u003eCarlisle Brake \u0026amp; Friction (CBF) warrants Hawk Performance branded products to be free of defects from workmanship and materials. This warranty does not apply to normal wear or damage caused by negligence, lack of maintenance, accident, abnormal operations, or improper installation or service. CBF does not make any other warranty claims, either expressed or implied, including the implied warranties of merchantability or fitness for a particular purpose. In no event will CBF\/Hawk Performance be liable for incidental or consequential damages of any kind, whether such damages are claimed on account of breach of warranty, breach of contract, negligence, or strict product liability. This includes without limitation, damage to property, or other economic losses that may be incurred. Any, and all, warranty claims must be processed through CBF. All valid warranty claims will be replaced and\/or reimbursed with Hawk Performance branded products of equal or greater value.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e* Disclaimer to Limited Life-Time Warranty: Motorsports brake pads and rotors are developed for high performance events. Racing is a dangerous sport. Hawk Performance racing brake pads and rotors are sold without warranty expressed or implied. No warranty or representation is made as to this products ability to protect the user from injury or death. The user assumes that risk.\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/div\u003e","brand":"HAWK Performance","offers":[{"title":"Default Title","offer_id":47787057021224,"sku":"HWK-HB453W.585","price":303.68,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/5767\/7352\/files\/hawk-performance-dtc-30-motorsports-brake-pads-front-hb453w-585-987.webp?v=1716852329"},{"product_id":"hawk-performance-dtc-50-motorsports-brake-pads-front-hb453v-585","title":"HAWK Performance DTC-50 Motorsports Brake Pads Front - HB453V.585","description":"\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cp\u003eThe Hawk DTC-50 compound is what racers have been asking for: a pad that can be used as a split compound for tuning, and an endurance compound that can be used at the highest levels of racing. DTC-50 was developed through extensive testing, giving racers a pad that enhances our line of Dynamic Torque Control products and bridges the temperature and brake torque range between our current DTC-30 to DTC-60 race pads. This new compound offers consistent performance across a wide range of temperatures, while providing very high torque and aggressive initial bite.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003eVery High Torque\u003c\/li\u003e\n\u003cli\u003eAggressive Initial Bite\u003c\/li\u003e\n\u003cli\u003eExcellent Modulation and Release Characteristics\u003c\/li\u003e\n\u003cli\u003eHigh Temperature Fade Resistance\u003c\/li\u003e\n\u003cli\u003eDesigned for High Deceleration Rates\u003c\/li\u003e\n\u003cli\u003e500-1100 Deg F Operating Temperature Range\u003c\/li\u003e\n\u003cli\u003e500-1100 Deg F Optimal Temperature Range\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eFor motorsport use only. Image is for illustative purposes, actual product may differ.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003ch3\u003eHawk Brake Pad Installation Procedure\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eInstall Brake pads properly. Be sure pads are securely positioned in the caliper.\u003c\/li\u003e\n\u003cli\u003eFlush system with fresh brake fluid.\u003c\/li\u003e\n\u003cli\u003eCheck all hydraulic parts for excess wear and tear.\u003c\/li\u003e\n\u003cli\u003eCheck disc for proper thickness, parallelism, and lateral run-out.\u003c\/li\u003e\n\u003cli\u003eCheck disc for scoring or grooves over .012\"\" depth. If either applies, resurfacing or replacement is required.\u003c\/li\u003e\n\u003cli\u003eIf disc does not need resurfacing then contamination from the previous brake pads must be removed. Sand discs with Garnet sandpaper using moderate pressure. Use soap and water to clean off disc surface after sanding and machining. Discs should be free and clear of oil, grease, and brake fluid\u003c\/li\u003e\n\u003cli\u003eInspect calipers for freedom of movement. Lubricate where necessary\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eHawk Brake Pad Bedding Procedure - Motorsports Pads\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAfter reaching medium speed engage brake pedal to slow car without coming to a complete stop. Release pedal quickly and do not drag brakes. Repeat four or five times.\u003c\/li\u003e\n\u003cli\u003eAt higher speeds engage brake pedal to slow car without coming to a complete stop. Release pedal quickly and do not drag brakes. Repeat five times.\u003c\/li\u003e\n\u003cli\u003eAt or near race speed engage brake pedal to slow car without coming to a complete stop. Release pedal quickly and do not drag brakes. Repeat three times. Allow a few seconds between brake engagements while car is in motion.\u003c\/li\u003e\n\u003cli\u003eDo not hold brake pedal. Park car for approximately 20 minutes or until brake rotors are completely cool to the touch.\u003c\/li\u003e\n\u003cli\u003eIf during the above steps the brake pedal becomes soft or brake fade is noticed, park the car immediately for approximately 20 minutes. Do not hold brake pedal.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eImportant Reminders when Burnishing or Bedding Brake Pads\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eDo not attempt to use badly worn or damaged rotors with new brake pads.\u003c\/li\u003e\n\u003cli\u003eDo not drag brakes while car is moving during break-in procedure.\u003c\/li\u003e\n\u003cli\u003eDo not engage pedal while car is stopped at any time following the break-in procedure.\u003c\/li\u003e\n\u003cli\u003eUpon completing the procedure, allow the brake system to completely cool before racing.\u003c\/li\u003e\n\u003cli\u003eApplying the pedal a few times before the start of the race will allow the brake pads to heat up before attempting to reach race speeds.\u003c\/li\u003e\nli\u0026gt;Clean a used rotor surface with fine sand paper or steel wool, rinse with water, dry and install before bedding new pads\n\u003cli\u003eSome forms of racing do not allow time for the proper break-in procedure to be performed. However, it is still very important to attempt to perform at least the core of the procedure: Build up heat slowly and allow the system to completely cool down before racing if possible.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eLimited Lifetime Warranty\u003c\/h3\u003e\n\u003cp\u003eCarlisle Brake \u0026amp; Friction (CBF) warrants Hawk Performance branded products to be free of defects from workmanship and materials. This warranty does not apply to normal wear or damage caused by negligence, lack of maintenance, accident, abnormal operations, or improper installation or service. CBF does not make any other warranty claims, either expressed or implied, including the implied warranties of merchantability or fitness for a particular purpose. In no event will CBF\/Hawk Performance be liable for incidental or consequential damages of any kind, whether such damages are claimed on account of breach of warranty, breach of contract, negligence, or strict product liability. This includes without limitation, damage to property, or other economic losses that may be incurred. Any, and all, warranty claims must be processed through CBF. All valid warranty claims will be replaced and\/or reimbursed with Hawk Performance branded products of equal or greater value.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e* Disclaimer to Limited Life-Time Warranty: Motorsports brake pads and rotors are developed for high performance events. Racing is a dangerous sport. Hawk Performance racing brake pads and rotors are sold without warranty expressed or implied. No warranty or representation is made as to this products ability to protect the user from injury or death. The user assumes that risk.\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/div\u003e","brand":"HAWK Performance","offers":[{"title":"Default Title","offer_id":47787063181608,"sku":"HWK-HB453V.585","price":300.55,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/5767\/7352\/files\/hawk-performance-dtc-50-motorsports-brake-pads-front-hb453v-585-714.webp?v=1716855304"},{"product_id":"hawk-performance-dtc-60-motorsports-brake-pads-front-hb453g-585","title":"HAWK Performance DTC-60 Motorsports Brake Pads Front - HB453G.585","description":"\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cp\u003eRunning with extremely high deceleration rates and increased downforce poses different challenges, so Hawk designed DTC-60 race compound. Recommended with DTC-70 when split friction between axles is desired, it has excellent modulation and release characteristics.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cp\u003eDTC-60 has the same temperature range as DTC-70, but produces less brake torque. Many racers of lighter, smaller cars such as the Miata and S2000 will run DTC-60 Front and DTC-30 Rear. On larger, heavier, cars such as Corvettes, Mustangs, Porsches, BMWs and other specialty race cars, the DTC-60 is run on the rear with DTC-70 up front. This is not an entry level race compound and should not be driven on the street. Use when you are a serious racer with track experience and have had issues with less aggressive compounds overheating or not providing enough bite.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003eSuperior Release and Torque Control\u003c\/li\u003e\n\u003cli\u003eVery Low Pad and Rotor Wear\u003c\/li\u003e\n\u003cli\u003eHigh Torque\u003c\/li\u003e\n\u003cli\u003eExcellent Modulation and Release Characteristics\u003c\/li\u003e\n\u003cli\u003eApplicable to NASCAR, NASCAR modified, ARCA, Super Late models, pavement circle track, Pro 2, Pro 4 Off Road Trucks, Pro Lite, Sports Car, GT, GS, Open Wheel, Formula, Monster Trucks\u003c\/li\u003e\n\u003cli\u003eStable Friction Output\u003c\/li\u003e\n\u003cli\u003e400-1600 Deg F Operating Temperature Range\u003c\/li\u003e\n\u003cli\u003e600-1200 Deg F Optimal Temperature Range\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eFor motorsport use only. Image is for illustative purposes, actual product may differ.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003ch3\u003eHawk Brake Pad Installation Procedure\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eInstall Brake pads properly. Be sure pads are securely positioned in the caliper.\u003c\/li\u003e\n\u003cli\u003eFlush system with fresh brake fluid.\u003c\/li\u003e\n\u003cli\u003eCheck all hydraulic parts for excess wear and tear.\u003c\/li\u003e\n\u003cli\u003eCheck disc for proper thickness, parallelism, and lateral run-out.\u003c\/li\u003e\n\u003cli\u003eCheck disc for scoring or grooves over .012\"\" depth. If either applies, resurfacing or replacement is required.\u003c\/li\u003e\n\u003cli\u003eIf disc does not need resurfacing then contamination from the previous brake pads must be removed. Sand discs with Garnet sandpaper using moderate pressure. Use soap and water to clean off disc surface after sanding and machining. Discs should be free and clear of oil, grease, and brake fluid\u003c\/li\u003e\n\u003cli\u003eInspect calipers for freedom of movement. Lubricate where necessary\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eHawk Brake Pad Bedding Procedure - Motorsports Pads\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAfter reaching medium speed engage brake pedal to slow car without coming to a complete stop. Release pedal quickly and do not drag brakes. Repeat four or five times.\u003c\/li\u003e\n\u003cli\u003eAt higher speeds engage brake pedal to slow car without coming to a complete stop. Release pedal quickly and do not drag brakes. Repeat five times.\u003c\/li\u003e\n\u003cli\u003eAt or near race speed engage brake pedal to slow car without coming to a complete stop. Release pedal quickly and do not drag brakes. Repeat three times. Allow a few seconds between brake engagements while car is in motion.\u003c\/li\u003e\n\u003cli\u003eDo not hold brake pedal. Park car for approximately 20 minutes or until brake rotors are completely cool to the touch.\u003c\/li\u003e\n\u003cli\u003eIf during the above steps the brake pedal becomes soft or brake fade is noticed, park the car immediately for approximately 20 minutes. Do not hold brake pedal.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eImportant Reminders when Burnishing or Bedding Brake Pads\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eDo not attempt to use badly worn or damaged rotors with new brake pads.\u003c\/li\u003e\n\u003cli\u003eDo not drag brakes while car is moving during break-in procedure.\u003c\/li\u003e\n\u003cli\u003eDo not engage pedal while car is stopped at any time following the break-in procedure.\u003c\/li\u003e\n\u003cli\u003eUpon completing the procedure, allow the brake system to completely cool before racing.\u003c\/li\u003e\n\u003cli\u003eApplying the pedal a few times before the start of the race will allow the brake pads to heat up before attempting to reach race speeds.\u003c\/li\u003e\nli\u0026gt;Clean a used rotor surface with fine sand paper or steel wool, rinse with water, dry and install before bedding new pads\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"HAWK Performance","offers":[{"title":"Default Title","offer_id":47787067932968,"sku":"HWK-HB453G.585","price":394.66,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/5767\/7352\/files\/hawk-performance-dtc-60-motorsports-brake-pads-front-hb453g-585-290.webp?v=1716858143"},{"product_id":"hawk-performance-dtc-70-motorsports-brake-pads-front-hb453u-585","title":"HAWK Performance DTC-70 Motorsports Brake Pads Front - HB453U.585","description":"\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cp\u003eThe Hawk DTC-70 race compound was engineered with extremely high torque and highly aggressive initial bite for cars with high deceleration rates, with or without downforce. With superior release and control characteristics, it's a winning race solution on its own or as split friction with DTC-60.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cp\u003eDTC-70 is more aggressive than the DTC-60 but has the same temperature range. Many racers of Corvettes, Mustangs, Porsches, BMWs and other specialty race cars choose to run DTC-70 Front and DTC-60 rear. This is not an entry level race compound and should not be driven on the street. Use when you are a serious racer with track experience and have had issues with less aggressive compounds overheating or not providing enough bite.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003eHigh Performance\u003c\/li\u003e\n\u003cli\u003eHigh Torque\u003c\/li\u003e\n\u003cli\u003eSuperior Rotor and Pad Wear\u003c\/li\u003e\n\u003cli\u003eExcellent Modulation and Release Characteristics\u003c\/li\u003e\n\u003cli\u003eApplicable to NASCAR, NASCAR modified, ARCA, Super Late models, pavement circle track, Pro 2, Pro 4 Off Road Trucks, Pro Lite, Sports Car, GT, GS, Open Wheel, Formula, Monster Trucks\u003c\/li\u003e\n\u003cli\u003eStable Friction Output\u003c\/li\u003e\n\u003cli\u003e400-1600 Deg F Operating Temperature Range\u003c\/li\u003e\n\u003cli\u003e600-1200 Deg F Optimal Temperature Range\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eFor motorsport use only. Image is for illustative purposes, actual product may differ.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003ch3\u003eHawk Brake Pad Installation Procedure\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eInstall Brake pads properly. Be sure pads are securely positioned in the caliper.\u003c\/li\u003e\n\u003cli\u003eFlush system with fresh brake fluid.\u003c\/li\u003e\n\u003cli\u003eCheck all hydraulic parts for excess wear and tear.\u003c\/li\u003e\n\u003cli\u003eCheck disc for proper thickness, parallelism, and lateral run-out.\u003c\/li\u003e\n\u003cli\u003eCheck disc for scoring or grooves over .012\"\" depth. If either applies, resurfacing or replacement is required.\u003c\/li\u003e\n\u003cli\u003eIf disc does not need resurfacing then contamination from the previous brake pads must be removed. Sand discs with Garnet sandpaper using moderate pressure. Use soap and water to clean off disc surface after sanding and machining. Discs should be free and clear of oil, grease, and brake fluid\u003c\/li\u003e\n\u003cli\u003eInspect calipers for freedom of movement. Lubricate where necessary\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eHawk Brake Pad Bedding Procedure - Motorsports Pads\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAfter reaching medium speed engage brake pedal to slow car without coming to a complete stop. Release pedal quickly and do not drag brakes. Repeat four or five times.\u003c\/li\u003e\n\u003cli\u003eAt higher speeds engage brake pedal to slow car without coming to a complete stop. Release pedal quickly and do not drag brakes. Repeat five times.\u003c\/li\u003e\n\u003cli\u003eAt or near race speed engage brake pedal to slow car without coming to a complete stop. Release pedal quickly and do not drag brakes. Repeat three times. Allow a few seconds between brake engagements while car is in motion.\u003c\/li\u003e\n\u003cli\u003eDo not hold brake pedal. Park car for approximately 20 minutes or until brake rotors are completely cool to the touch.\u003c\/li\u003e\n\u003cli\u003eIf during the above steps the brake pedal becomes soft or brake fade is noticed, park the car immediately for approximately 20 minutes. Do not hold brake pedal.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eImportant Reminders when Burnishing or Bedding Brake Pads\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eDo not attempt to use badly worn or damaged rotors with new brake pads.\u003c\/li\u003e\n\u003cli\u003eDo not drag brakes while car is moving during break-in procedure.\u003c\/li\u003e\n\u003cli\u003eDo not engage pedal while car is stopped at any time following the break-in procedure.\u003c\/li\u003e\n\u003cli\u003eUpon completing the procedure, allow the brake system to completely cool before racing.\u003c\/li\u003e\n\u003cli\u003eApplying the pedal a few times before the start of the race will allow the brake pads to heat up before attempting to reach race speeds.\u003c\/li\u003e\nli\u0026gt;Clean a used rotor surface with fine sand paper or steel wool, rinse with water, dry and install before bedding new pads\n\u003cli\u003eSome forms of racing do not allow time for the proper break-in procedure to be performed. However, it is still very important to attempt to perform at least the core of the procedure: Build up heat slowly and allow the system to completely cool down before racing if possible.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"HAWK Performance","offers":[{"title":"Default Title","offer_id":47787096178984,"sku":"HWK-HB453U.585","price":430.84,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/5767\/7352\/files\/hawk-performance-dtc-70-motorsports-brake-pads-front-hb453u-585-115.webp?v=1716863601"},{"product_id":"hawk-performance-dtc-80-motorsports-brake-pads-front-hb453q-585","title":"HAWK Performance DTC-80 Motorsports Brake Pads Front - HB453Q.585","description":"\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cp\u003eHawk Performance products have dominated motorsports for more than 25 years, and this revolutionary compound is taking that domination to a new level. Intended for the hardest braking circuits where the most demanding brake products are required, Hawk DTC-80 is a compound engineered for use on all circle track and road racing venues where a high torque, high temperature-resilient friction material is a must. With a formulated flat coefficient of friction at high temperature levels, DTC-80 provides consistent performance corner after corner. Track tested and proven effective, this formulation offers lower wear rates and higher torque values than other competitive materials on the market today. The end results are better car control, more confident brake zone feel, and stunningly predictable performance.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cp\u003eThe DTC-80 has a higher temperature and generates more brake torque than the DTC-70. If you have been over-heating the DTC-70 or it is not giving you the torque you need, give the DTC-80 a try.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003eHigh Initial Bite\u003c\/li\u003e\n\u003cli\u003eHigh Torque\u003c\/li\u003e\n\u003cli\u003eConsistent Brake Torque over Temperature Range\u003c\/li\u003e\n\u003cli\u003eSuperior pad and Rotor Wear\u003c\/li\u003e\n\u003cli\u003eApplicable to NASCAR, NASCAR modified, ARCA, Super Late models, pavement circle track, Pro 2, Pro 4 Off Road Trucks, Pro Lite, Sports Car, GT, GS, Open Wheel, Formula, Monster Trucks\u003c\/li\u003e\n\u003cli\u003e500-1700 Deg F Operating Temperature Range\u003c\/li\u003e\n\u003cli\u003e600-1500 Deg F Optimal Temperature Range\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eFor motorsport use only. Image is for illustative purposes, actual product may differ.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003ch3\u003eHawk Brake Pad Installation Procedure\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eInstall Brake pads properly. Be sure pads are securely positioned in the caliper.\u003c\/li\u003e\n\u003cli\u003eFlush system with fresh brake fluid.\u003c\/li\u003e\n\u003cli\u003eCheck all hydraulic parts for excess wear and tear.\u003c\/li\u003e\n\u003cli\u003eCheck disc for proper thickness, parallelism, and lateral run-out.\u003c\/li\u003e\n\u003cli\u003eCheck disc for scoring or grooves over .012\"\" depth. If either applies, resurfacing or replacement is required.\u003c\/li\u003e\n\u003cli\u003eIf disc does not need resurfacing then contamination from the previous brake pads must be removed. Sand discs with Garnet sandpaper using moderate pressure. Use soap and water to clean off disc surface after sanding and machining. Discs should be free and clear of oil, grease, and brake fluid\u003c\/li\u003e\n\u003cli\u003eInspect calipers for freedom of movement. Lubricate where necessary\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eHawk Brake Pad Bedding Procedure - Motorsports Pads\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAfter reaching medium speed engage brake pedal to slow car without coming to a complete stop. Release pedal quickly and do not drag brakes. Repeat four or five times.\u003c\/li\u003e\n\u003cli\u003eAt higher speeds engage brake pedal to slow car without coming to a complete stop. Release pedal quickly and do not drag brakes. Repeat five times.\u003c\/li\u003e\n\u003cli\u003eAt or near race speed engage brake pedal to slow car without coming to a complete stop. Release pedal quickly and do not drag brakes. Repeat three times. Allow a few seconds between brake engagements while car is in motion.\u003c\/li\u003e\n\u003cli\u003eDo not hold brake pedal. Park car for approximately 20 minutes or until brake rotors are completely cool to the touch.\u003c\/li\u003e\n\u003cli\u003eIf during the above steps the brake pedal becomes soft or brake fade is noticed, park the car immediately for approximately 20 minutes. Do not hold brake pedal.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eImportant Reminders when Burnishing or Bedding Brake Pads\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eDo not attempt to use badly worn or damaged rotors with new brake pads.\u003c\/li\u003e\n\u003cli\u003eDo not drag brakes while car is moving during break-in procedure.\u003c\/li\u003e\n\u003cli\u003eDo not engage pedal while car is stopped at any time following the break-in procedure.\u003c\/li\u003e\n\u003cli\u003eUpon completing the procedure, allow the brake system to completely cool before racing.\u003c\/li\u003e\n\u003cli\u003eApplying the pedal a few times before the start of the race will allow the brake pads to heat up before attempting to reach race speeds.\u003c\/li\u003e\nli\u0026gt;Clean a used rotor surface with fine sand paper or steel wool, rinse with water, dry and install before bedding new pads\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"HAWK Performance","offers":[{"title":"Default Title","offer_id":47790909391144,"sku":"HWK-HB453Q.585","price":567.9,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/5767\/7352\/files\/hawk-performance-dtc-80-motorsports-brake-pads-front-hb453q-585-745.webp?v=1716866722"},{"product_id":"hawk-performance-er-1-motorsports-brake-pads-front-hb453d-585","title":"HAWK Performance ER-1 Motorsports Brake Pads Front - HB453D.585","description":"\u003cp\u003eER-1 has been developed by Hawk Performance for the endurance racing market with a simple goal; offer a higher coefficient of friction than competing endurance pads while maintaining matched or improved lifespan. Years of testing across America’s most prestigious races has resulted in a well-rounded compound that offers ideal modulation and pedal communication, with ground breaking friction stability across a thermal range as high as 1,600°F. This consistency of performance, hour after hour, makes it ideal for not only endurance racing, but HPDE, track days, time trials and even sprint racing.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSuperior Pad \u0026amp; Rotor wear\u003c\/li\u003e\n\u003cli\u003eConsistent medium-to-high friction\u003c\/li\u003e\n\u003cli\u003eSpecific emphasis on modulation, release and pedal communication\u003c\/li\u003e\n\u003cli\u003eIdeal for light-to-medium weight vehicles in HPDE, Track Day events, Time Trials, or Endurance Racing\u003c\/li\u003e\n\u003cli\u003eHigher coefficient of friction than competing endurance pads, wtih matched or improved lifespan\u003c\/li\u003e\n\u003cli\u003eAll Hawk Performance compounds are not compatible with carbon ceramic rotors. Hawk pads are designed to work with Iron\/Metal rotors\u003c\/li\u003e\n\u003cli\u003eMedium to High torque\u003c\/li\u003e\n\u003cli\u003e400-1600 F operating temperatures\u003c\/li\u003e\n\u003cli\u003e700-1100 F optimal temperatures\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eImage is for illustative purposes, actual product may differ.\u003c\/p\u003e\n\u003ch3\u003eLimited Lifetime Warranty\u003c\/h3\u003e\n\u003cp\u003eCarlisle Brake \u0026amp; Friction (CBF) warrants Hawk Performance branded products to be free of defects from workmanship and materials. This warranty does not apply to normal wear or damage caused by negligence, lack of maintenance, accident, abnormal operations, or improper installation or service. CBF does not make any other warranty claims, either expressed or implied, including the implied warranties of merchantability or fitness for a particular purpose. In no event will CBF\/Hawk Performance be liable for incidental or consequential damages of any kind, whether such damages are claimed on account of breach of warranty, breach of contract, negligence, or strict product liability. This includes without limitation, damage to property, or other economic losses that may be incurred. Any, and all, warranty claims must be processed through CBF. All valid warranty claims will be replaced and\/or reimbursed with Hawk Performance branded products of equal or greater value.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e* Disclaimer to Limited Life-Time Warranty: Motorsports brake pads and rotors are developed for high performance events. Racing is a dangerous sport. Hawk Performance racing brake pads and rotors are sold without warranty expressed or implied. No warranty or representation is made as to this products ability to protect the user from injury or death. The user assumes that risk.\u003c\/strong\u003e\u003c\/p\u003e","brand":"HAWK Performance","offers":[{"title":"Default Title","offer_id":47790916698408,"sku":"HWK-HB453D.585","price":410.02,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/5767\/7352\/files\/hawk-performance-er-1-motorsports-brake-pads-front-hb453d-585-503.webp?v=1716869263"},{"product_id":"hawk-performance-er-1-motorsports-brake-pads-rear-hb364d-587","title":"HAWK Performance ER-1 Motorsports Brake Pads Rear - HB364D.587","description":"\u003cp\u003eER-1 has been developed by Hawk Performance for the endurance racing market with a simple goal; offer a higher coefficient of friction than competing endurance pads while maintaining matched or improved lifespan. Years of testing across America’s most prestigious races has resulted in a well-rounded compound that offers ideal modulation and pedal communication, with ground breaking friction stability across a thermal range as high as 1,600°F. This consistency of performance, hour after hour, makes it ideal for not only endurance racing, but HPDE, track days, time trials and even sprint racing.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSuperior Pad \u0026amp; Rotor wear\u003c\/li\u003e\n\u003cli\u003eConsistent medium-to-high friction\u003c\/li\u003e\n\u003cli\u003eSpecific emphasis on modulation, release and pedal communication\u003c\/li\u003e\n\u003cli\u003eIdeal for light-to-medium weight vehicles in HPDE, Track Day events, Time Trials, or Endurance Racing\u003c\/li\u003e\n\u003cli\u003eHigher coefficient of friction than competing endurance pads, wtih matched or improved lifespan\u003c\/li\u003e\n\u003cli\u003eAll Hawk Performance compounds are not compatible with carbon ceramic rotors. Hawk pads are designed to work with Iron\/Metal rotors\u003c\/li\u003e\n\u003cli\u003eMedium to High torque\u003c\/li\u003e\n\u003cli\u003e400-1600 F operating temperatures\u003c\/li\u003e\n\u003cli\u003e700-1100 F optimal temperatures\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eImage is for illustative purposes, actual product may differ.\u003c\/p\u003e\n\u003ch3\u003eLimited Lifetime Warranty\u003c\/h3\u003e\n\u003cp\u003eCarlisle Brake \u0026amp; Friction (CBF) warrants Hawk Performance branded products to be free of defects from workmanship and materials. This warranty does not apply to normal wear or damage caused by negligence, lack of maintenance, accident, abnormal operations, or improper installation or service. CBF does not make any other warranty claims, either expressed or implied, including the implied warranties of merchantability or fitness for a particular purpose. In no event will CBF\/Hawk Performance be liable for incidental or consequential damages of any kind, whether such damages are claimed on account of breach of warranty, breach of contract, negligence, or strict product liability. This includes without limitation, damage to property, or other economic losses that may be incurred. Any, and all, warranty claims must be processed through CBF. All valid warranty claims will be replaced and\/or reimbursed with Hawk Performance branded products of equal or greater value.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e* Disclaimer to Limited Life-Time Warranty: Motorsports brake pads and rotors are developed for high performance events. Racing is a dangerous sport. Hawk Performance racing brake pads and rotors are sold without warranty expressed or implied. No warranty or representation is made as to this products ability to protect the user from injury or death. The user assumes that risk.\u003c\/strong\u003e\u003c\/p\u003e","brand":"HAWK Performance","offers":[{"title":"Default Title","offer_id":47790919516456,"sku":"HWK-HB364D.587","price":406.74,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/5767\/7352\/files\/hawk-performance-er-1-motorsports-brake-pads-rear-hb364d-587-970.webp?v=1716870378"},{"product_id":"hawk-performance-hp-plus-road-and-track-brake-pads-front-hb453n-585","title":"HAWK Performance HP Plus Road and Track Brake Pads Front - HB453N.585","description":"\u003cdiv\u003e\n\u003cp\u003eThe Hawk Performance HP Plus brake pad compound is ideal for Autocross and Track Day drivers looking for a high performance race compound that can take the heat of the track and get you home safely without having to change the pads. HP Plus utilizes a unique Ferro-Carbon, High-Tech friction material that was developed and manufactured for sport driving in autocross, Solo II, and track day applications. The Ferro-Carbon formulation offers lower wear rates and higher torque values than other competitive materials.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cp\u003eHP Plus is popular with enthusiasts that are looking for excellent street performance or wanting take their car auto-crossing or to a track day and not have to worry about changing pads. The HP Plus will provide a very noticeable increase in brake torque and temperature range when compared to OEM pads. Usually recommended to beginners who have very little to no track experience and are looking for an upgrade over stock.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003eLow to Mid Temperature Range\u003c\/li\u003e\n\u003cli\u003eFade Resistant\u003c\/li\u003e\n\u003cli\u003eSmooth, Predictable Torque\u003c\/li\u003e\n\u003cli\u003eIdeal for Autocross\u003c\/li\u003e\n\u003cli\u003e100-800 Deg F Operating Temperature Range\u003c\/li\u003e\n\u003cli\u003e300-600 Deg F Optimal Temperature Range\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eImage is for illustative purposes, actual product may differ.\u003c\/p\u003e\n\u003ch3\u003eHawk Brake Pad Installation Procedure\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eInstall Brake pads properly. Be sure pads are securely positioned in the caliper.\u003c\/li\u003e\n\u003cli\u003eFlush system with fresh brake fluid.\u003c\/li\u003e\n\u003cli\u003eCheck all hydraulic parts for excess wear and tear.\u003c\/li\u003e\n\u003cli\u003eCheck disc for proper thickness, parallelism, and lateral run-out.\u003c\/li\u003e\n\u003cli\u003eCheck disc for scoring or grooves over .012\"\" depth. If either applies, resurfacing or replacement is required.\u003c\/li\u003e\n\u003cli\u003eIf disc does not need resurfacing then contamination from the previous brake pads must be removed. Sand discs with Garnet sandpaper using moderate pressure. Use soap and water to clean off disc surface after sanding and machining. Discs should be free and clear of oil, grease, and brake fluid\u003c\/li\u003e\n\u003cli\u003eInspect calipers for freedom of movement. Lubricate where necessary\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eHawk Brake Pad Bedding Procedure - Street Compounds\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMake 6-10 slow-downs from approximately 30-35 mph to 5 mph. applying moderate pressure. Do not come to a complete stop.\u003c\/li\u003e\n\u003cli\u003eMake an additional 2 to 3 harder stops from approximately 40-45 mph. to zero.\u003c\/li\u003e\n\u003cli\u003eDO NOT DRAG THE BRAKES! (after stopping - do not leave your foot on the brake pedal)\u003c\/li\u003e\n\u003cli\u003eAllow 15 minutes or more for the brake system to cool down.\u003c\/li\u003e\n\u003cli\u003eYour new Hawk pads are ready for use.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eLimited Lifetime Warranty\u003c\/h3\u003e\n\u003cp\u003eCarlisle Brake \u0026amp; Friction (CBF) warrants Hawk Performance branded products to be free of defects from workmanship and materials. This warranty does not apply to normal wear or damage caused by negligence, lack of maintenance, accident, abnormal operations, or improper installation or service. CBF does not make any other warranty claims, either expressed or implied, including the implied warranties of merchantability or fitness for a particular purpose. In no event will CBF\/Hawk Performance be liable for incidental or consequential damages of any kind, whether such damages are claimed on account of breach of warranty, breach of contract, negligence, or strict product liability. This includes without limitation, damage to property, or other economic losses that may be incurred. Any, and all, warranty claims must be processed through CBF. All valid warranty claims will be replaced and\/or reimbursed with Hawk Performance branded products of equal or greater value.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e* Disclaimer to Limited Life-Time Warranty: Motorsports brake pads and rotors are developed for high performance events. Racing is a dangerous sport. Hawk Performance racing brake pads and rotors are sold without warranty expressed or implied. No warranty or representation is made as to this products ability to protect the user from injury or death. The user assumes that risk.\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/div\u003e","brand":"HAWK Performance","offers":[{"title":"Default Title","offer_id":47790927610152,"sku":"HWK-HB453N.585","price":190.56,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/5767\/7352\/files\/hawk-performance-hp-plus-road-and-track-brake-pads-front-hb453n-585-864.webp?v=1750840807"},{"product_id":"hawk-performance-hp-plus-road-and-track-brake-pads-rear-hb364n-587","title":"HAWK Performance HP Plus Road and Track Brake Pads Rear - HB364N.587","description":"\u003cdiv\u003e\n\u003cp\u003eThe Hawk Performance HP Plus brake pad compound is ideal for Autocross and Track Day drivers looking for a high performance race compound that can take the heat of the track and get you home safely without having to change the pads. HP Plus utilizes a unique Ferro-Carbon, High-Tech friction material that was developed and manufactured for sport driving in autocross, Solo II, and track day applications. The Ferro-Carbon formulation offers lower wear rates and higher torque values than other competitive materials.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cp\u003eHP Plus is popular with enthusiasts that are looking for excellent street performance or wanting take their car auto-crossing or to a track day and not have to worry about changing pads. The HP Plus will provide a very noticeable increase in brake torque and temperature range when compared to OEM pads. Usually recommended to beginners who have very little to no track experience and are looking for an upgrade over stock.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003eLow to Mid Temperature Range\u003c\/li\u003e\n\u003cli\u003eFade Resistant\u003c\/li\u003e\n\u003cli\u003eSmooth, Predictable Torque\u003c\/li\u003e\n\u003cli\u003eIdeal for Autocross\u003c\/li\u003e\n\u003cli\u003e100-800 Deg F Operating Temperature Range\u003c\/li\u003e\n\u003cli\u003e300-600 Deg F Optimal Temperature Range\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eImage is for illustative purposes, actual product may differ.\u003c\/p\u003e\n\u003ch3\u003eHawk Brake Pad Installation Procedure\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eInstall Brake pads properly. Be sure pads are securely positioned in the caliper.\u003c\/li\u003e\n\u003cli\u003eFlush system with fresh brake fluid.\u003c\/li\u003e\n\u003cli\u003eCheck all hydraulic parts for excess wear and tear.\u003c\/li\u003e\n\u003cli\u003eCheck disc for proper thickness, parallelism, and lateral run-out.\u003c\/li\u003e\n\u003cli\u003eCheck disc for scoring or grooves over .012\"\" depth. If either applies, resurfacing or replacement is required.\u003c\/li\u003e\n\u003cli\u003eIf disc does not need resurfacing then contamination from the previous brake pads must be removed. Sand discs with Garnet sandpaper using moderate pressure. Use soap and water to clean off disc surface after sanding and machining. Discs should be free and clear of oil, grease, and brake fluid\u003c\/li\u003e\n\u003cli\u003eInspect calipers for freedom of movement. Lubricate where necessary\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eHawk Brake Pad Bedding Procedure - Street Compounds\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMake 6-10 slow-downs from approximately 30-35 mph to 5 mph. applying moderate pressure. Do not come to a complete stop.\u003c\/li\u003e\n\u003cli\u003eMake an additional 2 to 3 harder stops from approximately 40-45 mph. to zero.\u003c\/li\u003e\n\u003cli\u003eDO NOT DRAG THE BRAKES! (after stopping - do not leave your foot on the brake pedal)\u003c\/li\u003e\n\u003cli\u003eAllow 15 minutes or more for the brake system to cool down.\u003c\/li\u003e\n\u003cli\u003eYour new Hawk pads are ready for use.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eLimited Lifetime Warranty\u003c\/h3\u003e\n\u003cp\u003eCarlisle Brake \u0026amp; Friction (CBF) warrants Hawk Performance branded products to be free of defects from workmanship and materials. This warranty does not apply to normal wear or damage caused by negligence, lack of maintenance, accident, abnormal operations, or improper installation or service. CBF does not make any other warranty claims, either expressed or implied, including the implied warranties of merchantability or fitness for a particular purpose. In no event will CBF\/Hawk Performance be liable for incidental or consequential damages of any kind, whether such damages are claimed on account of breach of warranty, breach of contract, negligence, or strict product liability. This includes without limitation, damage to property, or other economic losses that may be incurred. Any, and all, warranty claims must be processed through CBF. All valid warranty claims will be replaced and\/or reimbursed with Hawk Performance branded products of equal or greater value.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e* Disclaimer to Limited Life-Time Warranty: Motorsports brake pads and rotors are developed for high performance events. Racing is a dangerous sport. Hawk Performance racing brake pads and rotors are sold without warranty expressed or implied. No warranty or representation is made as to this products ability to protect the user from injury or death. The user assumes that risk.\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/div\u003e","brand":"HAWK Performance","offers":[{"title":"Default Title","offer_id":47790938816808,"sku":"HWK-HB364N.587","price":169.2,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/5767\/7352\/files\/hawk-performance-hp-plus-road-and-track-brake-pads-rear-hb364n-587-115.webp?v=1716876074"},{"product_id":"hawk-performance-hps-5-0-high-performance-street-brake-pads-front-hb453b-585","title":"HAWK Performance HPS 5.0 High Performance Street Brake Pads Front - HB453B.585","description":"\u003cp\u003eFor years, engine builders have been pushing motors to the limits of their ability, and at Hawk Performance, we're closer than ever to pushing the ABS Rev Limiter to its limits. The Hawk HPS 5.0 (High Performance Street 5.0) brake pad compound gives your vehicle the greatest possible stopping power and pedal feel without compromising ABS. HPS 5.0 is a Ferro-Carbon compound that provides advanced braking characteristics to enhance the driving experience. This compound combines the safety and quality of aerospace design with the braking technology of motorsports. The results are shorter stopping distances, improved performance under heavy braking conditions, and street car friendly characteristics.\u003c\/p\u003e\n\u003cp\u003eThe Hawk HPS 5.0 is a good choice if you are looking to increase your street performance to the maximum level possible without suffering the adverse side effects of noise and large amounts of brake dust commonly associated with higher performance pads. The HPS 5.0 will provide increased brake torque and operating temperature when compared to the Hawk HPS compound. The HPS 5.0 compound can withstand light track use as long as you are aware of the signs of over-heating and allow proper cool off time when the pads approach their upper temperature. The Hawk HPS 5.0 compound is not a race compound and it can not withstand prolonged race sessions at high temperatures. The HPS 5.0 Compound will be cleaner than most OEM Pads, but produce more brake dust than the Hawk Ceramic and Hawk HPS.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAggressive Torque\u003c\/li\u003e\n\u003cli\u003eGreat Rotor and Pad Wear\u003c\/li\u003e\n\u003cli\u003eSmooth, Predictable Control\u003c\/li\u003e\n\u003cli\u003eHigh Rates of Deceleration\u003c\/li\u003e\n\u003cli\u003eConsistent Release Characteristics\u003c\/li\u003e\n\u003cli\u003e100-750 Deg F Operating Temperature Range\u003c\/li\u003e\n\u003cli\u003e100-550 Deg F Optimal Temperature Range\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv\u003e\n\u003cp\u003eImage is for illustative purposes, actual product may differ.\u003c\/p\u003e\n\u003ch3\u003eHawk Brake Pad Installation Procedure\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eInstall Brake pads properly. Be sure pads are securely positioned in the caliper.\u003c\/li\u003e\n\u003cli\u003eFlush system with fresh brake fluid.\u003c\/li\u003e\n\u003cli\u003eCheck all hydraulic parts for excess wear and tear.\u003c\/li\u003e\n\u003cli\u003eCheck disc for proper thickness, parallelism, and lateral run-out.\u003c\/li\u003e\n\u003cli\u003eCheck disc for scoring or grooves over .012\"\" depth. If either applies, resurfacing or replacement is required.\u003c\/li\u003e\n\u003cli\u003eIf disc does not need resurfacing then contamination from the previous brake pads must be removed. Sand discs with Garnet sandpaper using moderate pressure. Use soap and water to clean off disc surface after sanding and machining. Discs should be free and clear of oil, grease, and brake fluid\u003c\/li\u003e\n\u003cli\u003eInspect calipers for freedom of movement. Lubricate where necessary\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eHawk Brake Pad Bedding Procedure - Street Compounds\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMake 6-10 slow-downs from approximately 30-35 mph to 5 mph. applying moderate pressure. Do not come to a complete stop.\u003c\/li\u003e\n\u003cli\u003eMake an additional 2 to 3 harder stops from approximately 40-45 mph. to zero.\u003c\/li\u003e\n\u003cli\u003eDO NOT DRAG THE BRAKES! (after stopping - do not leave your foot on the brake pedal)\u003c\/li\u003e\n\u003cli\u003eAllow 15 minutes or more for the brake system to cool down.\u003c\/li\u003e\n\u003cli\u003eYour new Hawk pads are ready for use.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eLimited Lifetime Warranty\u003c\/h3\u003e\n\u003cp\u003eCarlisle Brake \u0026amp; Friction (CBF) warrants Hawk Performance branded products to be free of defects from workmanship and materials. This warranty does not apply to normal wear or damage caused by negligence, lack of maintenance, accident, abnormal operations, or improper installation or service. CBF does not make any other warranty claims, either expressed or implied, including the implied warranties of merchantability or fitness for a particular purpose. In no event will CBF\/Hawk Performance be liable for incidental or consequential damages of any kind, whether such damages are claimed on account of breach of warranty, breach of contract, negligence, or strict product liability. This includes without limitation, damage to property, or other economic losses that may be incurred. Any, and all, warranty claims must be processed through CBF. All valid warranty claims will be replaced and\/or reimbursed with Hawk Performance branded products of equal or greater value.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e* Disclaimer to Limited Life-Time Warranty: Motorsports brake pads and rotors are developed for high performance events. Racing is a dangerous sport. Hawk Performance racing brake pads and rotors are sold without warranty expressed or implied. No warranty or representation is made as to this products ability to protect the user from injury or death. The user assumes that risk.\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/div\u003e","brand":"HAWK Performance","offers":[{"title":"Default Title","offer_id":47790951498024,"sku":"HWK-HB453B.585","price":170.04,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/5767\/7352\/files\/hawk-performance-hps-5-0-high-street-brake-pads-front-hb453b-585-294.webp?v=1716879745"},{"product_id":"hawk-performance-hps-5-0-high-performance-street-brake-pads-rear-hb364b-587","title":"HAWK Performance HPS 5.0 High Performance Street Brake Pads Rear - HB364B.587","description":"\u003cp\u003eFor years, engine builders have been pushing motors to the limits of their ability, and at Hawk Performance, we're closer than ever to pushing the ABS Rev Limiter to its limits. The Hawk HPS 5.0 (High Performance Street 5.0) brake pad compound gives your vehicle the greatest possible stopping power and pedal feel without compromising ABS. HPS 5.0 is a Ferro-Carbon compound that provides advanced braking characteristics to enhance the driving experience. This compound combines the safety and quality of aerospace design with the braking technology of motorsports. The results are shorter stopping distances, improved performance under heavy braking conditions, and street car friendly characteristics.\u003c\/p\u003e\n\u003cp\u003eThe Hawk HPS 5.0 is a good choice if you are looking to increase your street performance to the maximum level possible without suffering the adverse side effects of noise and large amounts of brake dust commonly associated with higher performance pads. The HPS 5.0 will provide increased brake torque and operating temperature when compared to the Hawk HPS compound. The HPS 5.0 compound can withstand light track use as long as you are aware of the signs of over-heating and allow proper cool off time when the pads approach their upper temperature. The Hawk HPS 5.0 compound is not a race compound and it can not withstand prolonged race sessions at high temperatures. The HPS 5.0 Compound will be cleaner than most OEM Pads, but produce more brake dust than the Hawk Ceramic and Hawk HPS.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAggressive Torque\u003c\/li\u003e\n\u003cli\u003eGreat Rotor and Pad Wear\u003c\/li\u003e\n\u003cli\u003eSmooth, Predictable Control\u003c\/li\u003e\n\u003cli\u003eHigh Rates of Deceleration\u003c\/li\u003e\n\u003cli\u003eConsistent Release Characteristics\u003c\/li\u003e\n\u003cli\u003e100-750 Deg F Operating Temperature Range\u003c\/li\u003e\n\u003cli\u003e100-550 Deg F Optimal Temperature Range\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv\u003e\n\u003cp\u003eImage is for illustative purposes, actual product may differ.\u003c\/p\u003e\n\u003ch3\u003eHawk Brake Pad Installation Procedure\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eInstall Brake pads properly. Be sure pads are securely positioned in the caliper.\u003c\/li\u003e\n\u003cli\u003eFlush system with fresh brake fluid.\u003c\/li\u003e\n\u003cli\u003eCheck all hydraulic parts for excess wear and tear.\u003c\/li\u003e\n\u003cli\u003eCheck disc for proper thickness, parallelism, and lateral run-out.\u003c\/li\u003e\n\u003cli\u003eCheck disc for scoring or grooves over .012\"\" depth. If either applies, resurfacing or replacement is required.\u003c\/li\u003e\n\u003cli\u003eIf disc does not need resurfacing then contamination from the previous brake pads must be removed. Sand discs with Garnet sandpaper using moderate pressure. Use soap and water to clean off disc surface after sanding and machining. Discs should be free and clear of oil, grease, and brake fluid\u003c\/li\u003e\n\u003cli\u003eInspect calipers for freedom of movement. Lubricate where necessary\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eHawk Brake Pad Bedding Procedure - Street Compounds\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMake 6-10 slow-downs from approximately 30-35 mph to 5 mph. applying moderate pressure. Do not come to a complete stop.\u003c\/li\u003e\n\u003cli\u003eMake an additional 2 to 3 harder stops from approximately 40-45 mph. to zero.\u003c\/li\u003e\n\u003cli\u003eDO NOT DRAG THE BRAKES! (after stopping - do not leave your foot on the brake pedal)\u003c\/li\u003e\n\u003cli\u003eAllow 15 minutes or more for the brake system to cool down.\u003c\/li\u003e\n\u003cli\u003eYour new Hawk pads are ready for use.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eLimited Lifetime Warranty\u003c\/h3\u003e\n\u003cp\u003eCarlisle Brake \u0026amp; Friction (CBF) warrants Hawk Performance branded products to be free of defects from workmanship and materials. This warranty does not apply to normal wear or damage caused by negligence, lack of maintenance, accident, abnormal operations, or improper installation or service. CBF does not make any other warranty claims, either expressed or implied, including the implied warranties of merchantability or fitness for a particular purpose. In no event will CBF\/Hawk Performance be liable for incidental or consequential damages of any kind, whether such damages are claimed on account of breach of warranty, breach of contract, negligence, or strict product liability. This includes without limitation, damage to property, or other economic losses that may be incurred. Any, and all, warranty claims must be processed through CBF. All valid warranty claims will be replaced and\/or reimbursed with Hawk Performance branded products of equal or greater value.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e* Disclaimer to Limited Life-Time Warranty: Motorsports brake pads and rotors are developed for high performance events. Racing is a dangerous sport. Hawk Performance racing brake pads and rotors are sold without warranty expressed or implied. No warranty or representation is made as to this products ability to protect the user from injury or death. The user assumes that risk.\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/div\u003e","brand":"HAWK Performance","offers":[{"title":"Default Title","offer_id":47790972010792,"sku":"HWK-HB364B.587","price":147.82,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/5767\/7352\/files\/hawk-performance-hps-5-0-high-street-brake-pads-rear-hb364b-587-337.webp?v=1716883921"},{"product_id":"hawk-performance-hps-high-performance-street-brake-pads-front-hb453f-585","title":"HAWK Performance HPS High Performance Street Brake Pads Front - HB453F.585","description":"\u003cdiv\u003e\n\u003cp\u003eHawk HPS (High Performance Street) brake pads are world renowned for increasing stopping power on your street driven vehicle. Increasing the performance of your vehicles braking system is easy when you choose Hawk Performance's HPS braking compound. This unique Ferro-Carbon formula was developed for street performance using the safety and quality of Aerospace and Motorsports severe-duty friction technology. The High Performance Street compound offers a higher coefficient of friction over stock brake pads and can provide you 20-40% more stopping power and higher resistance to brake fade than most standard replacement pads. Less fade means you'll have a highly durable brake pad with less brake dust.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cp\u003eThe Hawk HPS compound, in most cases, will provide increased brake torque and operating temperature when compared to OEM pads. There will also be a decrease in brake dust. With an upper end operating temperature of 800-900 Deg F, the HPS compound can withstand light track use as long as you are aware of the signs of over-heating and allow proper cool off time when the pads approach their upper temperature. The Hawk HPS compound is not a race compound and it can not withstand prolonged race sessions at high temperatures. Concerning brake dust, the HPS will be cleaner than your OEM Pads, but create more dust than the Hawk Ceramic compound. The performance improvement over Hawk Ceramic comes at the cost of increased dust production.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003eSmooth braking Feel\u003c\/li\u003e\n\u003cli\u003eExcellent for Spirited Driving\u003c\/li\u003e\n\u003cli\u003eGentle on Pads and Rotors\u003c\/li\u003e\n\u003cli\u003eConsistent Release Characteristics\u003c\/li\u003e\n\u003cli\u003eIncreased Stopping Power\u003c\/li\u003e\n\u003cli\u003e100-700 Deg F Operating Temperature Range\u003c\/li\u003e\n\u003cli\u003e100-500 Deg F Optimal Temperature Range\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eImage is for illustative purposes, actual product may differ.\u003c\/p\u003e\n\u003ch3\u003eHawk Brake Pad Installation Procedure\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eInstall Brake pads properly. Be sure pads are securely positioned in the caliper.\u003c\/li\u003e\n\u003cli\u003eFlush system with fresh brake fluid.\u003c\/li\u003e\n\u003cli\u003eCheck all hydraulic parts for excess wear and tear.\u003c\/li\u003e\n\u003cli\u003eCheck disc for proper thickness, parallelism, and lateral run-out.\u003c\/li\u003e\n\u003cli\u003eCheck disc for scoring or grooves over .012\"\" depth. If either applies, resurfacing or replacement is required.\u003c\/li\u003e\n\u003cli\u003eIf disc does not need resurfacing then contamination from the previous brake pads must be removed. Sand discs with Garnet sandpaper using moderate pressure. Use soap and water to clean off disc surface after sanding and machining. Discs should be free and clear of oil, grease, and brake fluid\u003c\/li\u003e\n\u003cli\u003eInspect calipers for freedom of movement. Lubricate where necessary\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eHawk Brake Pad Bedding Procedure - Street Compounds\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMake 6-10 slow-downs from approximately 30-35 mph to 5 mph. applying moderate pressure. Do not come to a complete stop.\u003c\/li\u003e\n\u003cli\u003eMake an additional 2 to 3 harder stops from approximately 40-45 mph. to zero.\u003c\/li\u003e\n\u003cli\u003eDO NOT DRAG THE BRAKES! (after stopping - do not leave your foot on the brake pedal)\u003c\/li\u003e\n\u003cli\u003eAllow 15 minutes or more for the brake system to cool down.\u003c\/li\u003e\n\u003cli\u003eYour new Hawk pads are ready for use.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eLimited Lifetime Warranty\u003c\/h3\u003e\n\u003cp\u003eCarlisle Brake \u0026amp; Friction (CBF) warrants Hawk Performance branded products to be free of defects from workmanship and materials. This warranty does not apply to normal wear or damage caused by negligence, lack of maintenance, accident, abnormal operations, or improper installation or service. CBF does not make any other warranty claims, either expressed or implied, including the implied warranties of merchantability or fitness for a particular purpose. In no event will CBF\/Hawk Performance be liable for incidental or consequential damages of any kind, whether such damages are claimed on account of breach of warranty, breach of contract, negligence, or strict product liability. This includes without limitation, damage to property, or other economic losses that may be incurred. Any, and all, warranty claims must be processed through CBF. All valid warranty claims will be replaced and\/or reimbursed with Hawk Performance branded products of equal or greater value.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e* Disclaimer to Limited Life-Time Warranty: Motorsports brake pads and rotors are developed for high performance events. Racing is a dangerous sport. Hawk Performance racing brake pads and rotors are sold without warranty expressed or implied. No warranty or representation is made as to this products ability to protect the user from injury or death. The user assumes that risk.\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/div\u003e","brand":"HAWK Performance","offers":[{"title":"Default Title","offer_id":47791004123432,"sku":"HWK-HB453F.585","price":162.36,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/5767\/7352\/files\/hawk-performance-hps-high-street-brake-pads-front-hb453f-585-724.webp?v=1716890649"},{"product_id":"hawk-performance-hps-high-performance-street-brake-pads-rear-hb364f-587","title":"HAWK Performance HPS High Performance Street Brake Pads Rear - HB364F.587","description":"\u003cdiv\u003e\n\u003cp\u003eHawk HPS (High Performance Street) brake pads are world renowned for increasing stopping power on your street driven vehicle. Increasing the performance of your vehicles braking system is easy when you choose Hawk Performance's HPS braking compound. This unique Ferro-Carbon formula was developed for street performance using the safety and quality of Aerospace and Motorsports severe-duty friction technology. The High Performance Street compound offers a higher coefficient of friction over stock brake pads and can provide you 20-40% more stopping power and higher resistance to brake fade than most standard replacement pads. Less fade means you'll have a highly durable brake pad with less brake dust.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cp\u003eThe Hawk HPS compound, in most cases, will provide increased brake torque and operating temperature when compared to OEM pads. There will also be a decrease in brake dust. With an upper end operating temperature of 800-900 Deg F, the HPS compound can withstand light track use as long as you are aware of the signs of over-heating and allow proper cool off time when the pads approach their upper temperature. The Hawk HPS compound is not a race compound and it can not withstand prolonged race sessions at high temperatures. Concerning brake dust, the HPS will be cleaner than your OEM Pads, but create more dust than the Hawk Ceramic compound. The performance improvement over Hawk Ceramic comes at the cost of increased dust production.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003eSmooth braking Feel\u003c\/li\u003e\n\u003cli\u003eExcellent for Spirited Driving\u003c\/li\u003e\n\u003cli\u003eGentle on Pads and Rotors\u003c\/li\u003e\n\u003cli\u003eConsistent Release Characteristics\u003c\/li\u003e\n\u003cli\u003eIncreased Stopping Power\u003c\/li\u003e\n\u003cli\u003e100-700 Deg F Operating Temperature Range\u003c\/li\u003e\n\u003cli\u003e100-500 Deg F Optimal Temperature Range\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eImage is for illustative purposes, actual product may differ.\u003c\/p\u003e\n\u003ch3\u003eHawk Brake Pad Installation Procedure\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eInstall Brake pads properly. Be sure pads are securely positioned in the caliper.\u003c\/li\u003e\n\u003cli\u003eFlush system with fresh brake fluid.\u003c\/li\u003e\n\u003cli\u003eCheck all hydraulic parts for excess wear and tear.\u003c\/li\u003e\n\u003cli\u003eCheck disc for proper thickness, parallelism, and lateral run-out.\u003c\/li\u003e\n\u003cli\u003eCheck disc for scoring or grooves over .012\"\" depth. If either applies, resurfacing or replacement is required.\u003c\/li\u003e\n\u003cli\u003eIf disc does not need resurfacing then contamination from the previous brake pads must be removed. Sand discs with Garnet sandpaper using moderate pressure. Use soap and water to clean off disc surface after sanding and machining. Discs should be free and clear of oil, grease, and brake fluid\u003c\/li\u003e\n\u003cli\u003eInspect calipers for freedom of movement. Lubricate where necessary\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eHawk Brake Pad Bedding Procedure - Street Compounds\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMake 6-10 slow-downs from approximately 30-35 mph to 5 mph. applying moderate pressure. Do not come to a complete stop.\u003c\/li\u003e\n\u003cli\u003eMake an additional 2 to 3 harder stops from approximately 40-45 mph. to zero.\u003c\/li\u003e\n\u003cli\u003eDO NOT DRAG THE BRAKES! (after stopping - do not leave your foot on the brake pedal)\u003c\/li\u003e\n\u003cli\u003eAllow 15 minutes or more for the brake system to cool down.\u003c\/li\u003e\n\u003cli\u003eYour new Hawk pads are ready for use.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eLimited Lifetime Warranty\u003c\/h3\u003e\n\u003cp\u003eCarlisle Brake \u0026amp; Friction (CBF) warrants Hawk Performance branded products to be free of defects from workmanship and materials. This warranty does not apply to normal wear or damage caused by negligence, lack of maintenance, accident, abnormal operations, or improper installation or service. CBF does not make any other warranty claims, either expressed or implied, including the implied warranties of merchantability or fitness for a particular purpose. In no event will CBF\/Hawk Performance be liable for incidental or consequential damages of any kind, whether such damages are claimed on account of breach of warranty, breach of contract, negligence, or strict product liability. This includes without limitation, damage to property, or other economic losses that may be incurred. Any, and all, warranty claims must be processed through CBF. All valid warranty claims will be replaced and\/or reimbursed with Hawk Performance branded products of equal or greater value.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e* Disclaimer to Limited Life-Time Warranty: Motorsports brake pads and rotors are developed for high performance events. Racing is a dangerous sport. Hawk Performance racing brake pads and rotors are sold without warranty expressed or implied. No warranty or representation is made as to this products ability to protect the user from injury or death. The user assumes that risk.\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/div\u003e","brand":"HAWK Performance","offers":[{"title":"Default Title","offer_id":47798132572456,"sku":"HWK-HB364F.587","price":141.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/5767\/7352\/files\/hawk-performance-hps-high-street-brake-pads-rear-hb364f-587-712.webp?v=1716894497"},{"product_id":"hawk-performance-ht-10-motorsports-brake-pads-front-hb453s-585","title":"HAWK Performance HT-10 Motorsports Brake Pads Front - HB453S.585","description":"\u003cdiv\u003e\n\u003cp\u003eFor linear in-braking in a medium temperature range, look no further than HT-10. It delivers smooth, controllable initial bite and consistent pedal feel. It's no wonder Hawk's legacy friction products have become the choice of champions.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cul\u003e\n\u003cli\u003eGood Static and Dynamic Coefficient of Friction\u003c\/li\u003e\n\u003cli\u003eExcellent modulation characteristics\u003c\/li\u003e\n\u003cli\u003e300-1300 Deg F Operating Temperature Range\u003c\/li\u003e\n\u003cli\u003e300-1100 Deg F Optimal Temperature Range\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv\u003e\n\u003cp\u003eImage is for illustative purposes, actual product may differ.\u003c\/p\u003e\n\u003ch3\u003eHawk Brake Pad Installation Procedure\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eInstall Brake pads properly. Be sure pads are securely positioned in the caliper.\u003c\/li\u003e\n\u003cli\u003eFlush system with fresh brake fluid.\u003c\/li\u003e\n\u003cli\u003eCheck all hydraulic parts for excess wear and tear.\u003c\/li\u003e\n\u003cli\u003eCheck disc for proper thickness, parallelism, and lateral run-out.\u003c\/li\u003e\n\u003cli\u003eCheck disc for scoring or grooves over .012\"\" depth. If either applies, resurfacing or replacement is required.\u003c\/li\u003e\n\u003cli\u003eIf disc does not need resurfacing then contamination from the previous brake pads must be removed. Sand discs with Garnet sandpaper using moderate pressure. Use soap and water to clean off disc surface after sanding and machining. Discs should be free and clear of oil, grease, and brake fluid\u003c\/li\u003e\n\u003cli\u003eInspect calipers for freedom of movement. Lubricate where necessary\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eHawk Brake Pad Bedding Procedure - Motorsports Pads\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAfter reaching medium speed engage brake pedal to slow car without coming to a complete stop. Release pedal quickly and do not drag brakes. Repeat four or five times.\u003c\/li\u003e\n\u003cli\u003eAt higher speeds engage brake pedal to slow car without coming to a complete stop. Release pedal quickly and do not drag brakes. Repeat five times.\u003c\/li\u003e\n\u003cli\u003eAt or near race speed engage brake pedal to slow car without coming to a complete stop. Release pedal quickly and do not drag brakes. Repeat three times. Allow a few seconds between brake engagements while car is in motion.\u003c\/li\u003e\n\u003cli\u003eDo not hold brake pedal. Park car for approximately 20 minutes or until brake rotors are completely cool to the touch.\u003c\/li\u003e\n\u003cli\u003eIf during the above steps the brake pedal becomes soft or brake fade is noticed, park the car immediately for approximately 20 minutes. Do not hold brake pedal.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eImportant Reminders when Burnishing or Bedding Brake Pads\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eDo not attempt to use badly worn or damaged rotors with new brake pads.\u003c\/li\u003e\n\u003cli\u003eDo not drag brakes while car is moving during break-in procedure.\u003c\/li\u003e\n\u003cli\u003eDo not engage pedal while car is stopped at any time following the break-in procedure.\u003c\/li\u003e\n\u003cli\u003eUpon completing the procedure, allow the brake system to completely cool before racing.\u003c\/li\u003e\n\u003cli\u003eApplying the pedal a few times before the start of the race will allow the brake pads to heat up before attempting to reach race speeds.\u003c\/li\u003e\nli\u0026gt;Clean a used rotor surface with fine sand paper or steel wool, rinse with water, dry and install before bedding new pads\n\u003cli\u003eSome forms of racing do not allow time for the proper break-in procedure to be performed. However, it is still very important to attempt to perform at least the core of the procedure: Build up heat slowly and allow the system to completely cool down before racing if possible.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eLimited Lifetime Warranty\u003c\/h3\u003e\n\u003cp\u003eCarlisle Brake \u0026amp; Friction (CBF) warrants Hawk Performance branded products to be free of defects from workmanship and materials. This warranty does not apply to normal wear or damage caused by negligence, lack of maintenance, accident, abnormal operations, or improper installation or service. CBF does not make any other warranty claims, either expressed or implied, including the implied warranties of merchantability or fitness for a particular purpose. In no event will CBF\/Hawk Performance be liable for incidental or consequential damages of any kind, whether such damages are claimed on account of breach of warranty, breach of contract, negligence, or strict product liability. This includes without limitation, damage to property, or other economic losses that may be incurred. Any, and all, warranty claims must be processed through CBF. All valid warranty claims will be replaced and\/or reimbursed with Hawk Performance branded products of equal or greater value.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e* Disclaimer to Limited Life-Time Warranty: Motorsports brake pads and rotors are developed for high performance events. Racing is a dangerous sport. Hawk Performance racing brake pads and rotors are sold without warranty expressed or implied. No warranty or representation is made as to this products ability to protect the user from injury or death. The user assumes that risk.\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/div\u003e","brand":"HAWK Performance","offers":[{"title":"Default Title","offer_id":47798148727080,"sku":"HWK-HB453S.585","price":320.12,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/5767\/7352\/files\/hawk-performance-ht-10-motorsports-brake-pads-front-hb453s-585-988.webp?v=1716899325"},{"product_id":"hawk-performance-pc-performance-ceramic-street-brake-pads-front-hb453z-585","title":"HAWK Performance PC Performance Ceramic Street Brake Pads Front - HB453Z.585","description":"\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cp\u003eHawk understands the needs of today's ceramic brake pad users and has specifically formulated our composite material to meet - and beat - the stringent low noise, ultra-low dust performance standards they have set. Engineered to reduce brake NVH (Noise, Vibration and Harshness),Hawk PC (Performance Ceramic) is a premium disc brake pad that delivers excellent performance mile after mile. Providing a linear friction profile that allows your vehicle's ABS system to operate most effectively, the unique compound has the advantage of never sacrificing power to achieve traditional ceramic pad attributes. With Hawk's PC, you can expect reduced brake pad wear, longer rotor life, and our quietest ride ever.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cp\u003eThe Hawk PC (Performance Ceramic) is a great compound when your top priority is to minimize brake dust. This compound is a very popular replacement for OEM Brembo packages supplied on performance vehicles such as Corvettes, Mustangs, Challengers, Chargers, Subaru STI, and many others. If you are not looking to have increased brake performance over the stock level and want to virtually eliminate brake dust, the Hawk Performance Ceramic is what you are looking for.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003eExtremely Quite\u003c\/li\u003e\n\u003cli\u003eUltra-low Dust\u003c\/li\u003e\n\u003cli\u003eImproved Stopping Power\u003c\/li\u003e\n\u003cli\u003eGentle on rotors\u003c\/li\u003e\n\u003cli\u003eStable Friction Output\u003c\/li\u003e\n\u003cli\u003e100-650 Deg F Operating Temperature Range\u003c\/li\u003e\n\u003cli\u003e100-450 Deg F Optimal Temperature Range\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cp\u003eImage is for illustative purposes, actual product may differ.\u003c\/p\u003e\n\u003ch3\u003eHawk Brake Pad Installation Procedure\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eInstall Brake pads properly. Be sure pads are securely positioned in the caliper.\u003c\/li\u003e\n\u003cli\u003eFlush system with fresh brake fluid.\u003c\/li\u003e\n\u003cli\u003eCheck all hydraulic parts for excess wear and tear.\u003c\/li\u003e\n\u003cli\u003eCheck disc for proper thickness, parallelism, and lateral run-out.\u003c\/li\u003e\n\u003cli\u003eCheck disc for scoring or grooves over .012\"\" depth. If either applies, resurfacing or replacement is required.\u003c\/li\u003e\n\u003cli\u003eIf disc does not need resurfacing then contamination from the previous brake pads must be removed. Sand discs with Garnet sandpaper using moderate pressure. Use soap and water to clean off disc surface after sanding and machining. Discs should be free and clear of oil, grease, and brake fluid\u003c\/li\u003e\n\u003cli\u003eInspect calipers for freedom of movement. Lubricate where necessary\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eHawk Brake Pad Bedding Procedure - Street Compounds\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMake 6-10 slow-downs from approximately 30-35 mph to 5 mph. applying moderate pressure. Do not come to a complete stop.\u003c\/li\u003e\n\u003cli\u003eMake an additional 2 to 3 harder stops from approximately 40-45 mph. to zero.\u003c\/li\u003e\n\u003cli\u003eDO NOT DRAG THE BRAKES! (after stopping - do not leave your foot on the brake pedal)\u003c\/li\u003e\n\u003cli\u003eAllow 15 minutes or more for the brake system to cool down.\u003c\/li\u003e\n\u003cli\u003eYour new Hawk pads are ready for use.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eLimited Lifetime Warranty\u003c\/h3\u003e\n\u003cp\u003eCarlisle Brake \u0026amp; Friction (CBF) warrants Hawk Performance branded products to be free of defects from workmanship and materials. This warranty does not apply to normal wear or damage caused by negligence, lack of maintenance, accident, abnormal operations, or improper installation or service. CBF does not make any other warranty claims, either expressed or implied, including the implied warranties of merchantability or fitness for a particular purpose. In no event will CBF\/Hawk Performance be liable for incidental or consequential damages of any kind, whether such damages are claimed on account of breach of warranty, breach of contract, negligence, or strict product liability. This includes without limitation, damage to property, or other economic losses that may be incurred. Any, and all, warranty claims must be processed through CBF. All valid warranty claims will be replaced and\/or reimbursed with Hawk Performance branded products of equal or greater value.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e* Disclaimer to Limited Life-Time Warranty: Motorsports brake pads and rotors are developed for high performance events. Racing is a dangerous sport. Hawk Performance racing brake pads and rotors are sold without warranty expressed or implied. No warranty or representation is made as to this products ability to protect the user from injury or death. The user assumes that risk.\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/div\u003e","brand":"HAWK Performance","offers":[{"title":"Default Title","offer_id":47798174351656,"sku":"HWK-HB453Z.585","price":175.18,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/5767\/7352\/files\/hawk-performance-pc-ceramic-street-brake-pads-front-hb453z-585-703.webp?v=1752149922"},{"product_id":"hawk-performance-pc-performance-ceramic-street-brake-pads-rear-hb364z-587","title":"HAWK Performance PC Performance Ceramic Street Brake Pads Rear - HB364Z.587","description":"\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cp\u003eHawk understands the needs of today's ceramic brake pad users and has specifically formulated our composite material to meet - and beat - the stringent low noise, ultra-low dust performance standards they have set. Engineered to reduce brake NVH (Noise, Vibration and Harshness),Hawk PC (Performance Ceramic) is a premium disc brake pad that delivers excellent performance mile after mile. Providing a linear friction profile that allows your vehicle's ABS system to operate most effectively, the unique compound has the advantage of never sacrificing power to achieve traditional ceramic pad attributes. With Hawk's PC, you can expect reduced brake pad wear, longer rotor life, and our quietest ride ever.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cp\u003eThe Hawk PC (Performance Ceramic) is a great compound when your top priority is to minimize brake dust. This compound is a very popular replacement for OEM Brembo packages supplied on performance vehicles such as Corvettes, Mustangs, Challengers, Chargers, Subaru STI, and many others. If you are not looking to have increased brake performance over the stock level and want to virtually eliminate brake dust, the Hawk Performance Ceramic is what you are looking for.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003eExtremely Quite\u003c\/li\u003e\n\u003cli\u003eUltra-low Dust\u003c\/li\u003e\n\u003cli\u003eImproved Stopping Power\u003c\/li\u003e\n\u003cli\u003eGentle on rotors\u003c\/li\u003e\n\u003cli\u003eStable Friction Output\u003c\/li\u003e\n\u003cli\u003e100-650 Deg F Operating Temperature Range\u003c\/li\u003e\n\u003cli\u003e100-450 Deg F Optimal Temperature Range\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cp\u003eImage is for illustative purposes, actual product may differ.\u003c\/p\u003e\n\u003ch3\u003eHawk Brake Pad Installation Procedure\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eInstall Brake pads properly. Be sure pads are securely positioned in the caliper.\u003c\/li\u003e\n\u003cli\u003eFlush system with fresh brake fluid.\u003c\/li\u003e\n\u003cli\u003eCheck all hydraulic parts for excess wear and tear.\u003c\/li\u003e\n\u003cli\u003eCheck disc for proper thickness, parallelism, and lateral run-out.\u003c\/li\u003e\n\u003cli\u003eCheck disc for scoring or grooves over .012\"\" depth. If either applies, resurfacing or replacement is required.\u003c\/li\u003e\n\u003cli\u003eIf disc does not need resurfacing then contamination from the previous brake pads must be removed. Sand discs with Garnet sandpaper using moderate pressure. Use soap and water to clean off disc surface after sanding and machining. Discs should be free and clear of oil, grease, and brake fluid\u003c\/li\u003e\n\u003cli\u003eInspect calipers for freedom of movement. Lubricate where necessary\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eHawk Brake Pad Bedding Procedure - Street Compounds\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMake 6-10 slow-downs from approximately 30-35 mph to 5 mph. applying moderate pressure. Do not come to a complete stop.\u003c\/li\u003e\n\u003cli\u003eMake an additional 2 to 3 harder stops from approximately 40-45 mph. to zero.\u003c\/li\u003e\n\u003cli\u003eDO NOT DRAG THE BRAKES! (after stopping - do not leave your foot on the brake pedal)\u003c\/li\u003e\n\u003cli\u003eAllow 15 minutes or more for the brake system to cool down.\u003c\/li\u003e\n\u003cli\u003eYour new Hawk pads are ready for use.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eLimited Lifetime Warranty\u003c\/h3\u003e\n\u003cp\u003eCarlisle Brake \u0026amp; Friction (CBF) warrants Hawk Performance branded products to be free of defects from workmanship and materials. This warranty does not apply to normal wear or damage caused by negligence, lack of maintenance, accident, abnormal operations, or improper installation or service. CBF does not make any other warranty claims, either expressed or implied, including the implied warranties of merchantability or fitness for a particular purpose. In no event will CBF\/Hawk Performance be liable for incidental or consequential damages of any kind, whether such damages are claimed on account of breach of warranty, breach of contract, negligence, or strict product liability. This includes without limitation, damage to property, or other economic losses that may be incurred. Any, and all, warranty claims must be processed through CBF. All valid warranty claims will be replaced and\/or reimbursed with Hawk Performance branded products of equal or greater value.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e* Disclaimer to Limited Life-Time Warranty: Motorsports brake pads and rotors are developed for high performance events. Racing is a dangerous sport. Hawk Performance racing brake pads and rotors are sold without warranty expressed or implied. No warranty or representation is made as to this products ability to protect the user from injury or death. The user assumes that risk.\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/div\u003e","brand":"HAWK Performance","offers":[{"title":"Default Title","offer_id":47798202925352,"sku":"HWK-HB364Z.587","price":124.47,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/5767\/7352\/files\/hawk-performance-pc-ceramic-street-brake-pads-rear-hb364z-587-288.webp?v=1716914042"},{"product_id":"wagner-tuning-competition-intercooler-kit-renault-megane-rs-mk4","title":"Wagner Tuning Competition Intercooler Kit Renault Megane RS MK4","description":"\u003cdiv\u003e\n\u003cspan\u003eCOMPETITION INTERCOOLER KIT Renault Megane 4 R.S.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eThe WAGNERTUNING high-performance intercooler has got a new competition core (Tube Fin) with the dimensions 315 mm x 227 [142] mm x 165 [150] mm [stepped] \/ 12,4 Inch x 8,9 [5,6] Inch x 6,4 [5,9] Inch [stepped], which was developed especially for the requirements of the Renault Megane 4RS. This high-performance core offers an 6  % larger frontal surface and 47  % more core volume compared to the stock intercooler.  \u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eThe aluminum cast endtanks were designed in CAD and optimized in CFD simulations (for an ideal internal airflow). The result is a excellent cooling property with a minimal back pressure. The newly developed competition high-performance core is very light and provides the adjoining components (for example the watercooler) enough air flow. That`s why this kit is perfect for racing use. An optimal cooling effect of the charged air with a significant increase in performance!\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eAn anti-corrosion powder coating with perfect heat-conducting properties protects the WAGNERTUNING intercooler from all environmental influences, so a lasting and optimal cooling effect can be guaranteed. The installation is done by replacing the original intercooler and is easy to perform (plug and play). All our products are subject to a continuous quality monitoring.  \u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eInlet diameter: Ø65  mm\/2,56 Inch ; Outlet diameter Ø67,2  mm\/2,64 Inch (stock click-connection)\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eDimensions stock intercooler:  \u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e290 mm x 233 mm x 115 mm \/ 11,4 Inch x 9,2 Inch x 4,5 Inch \u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eV  =  7,77  L \/ 474 Inch ³  \u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eA  =  675 cm ² \/ 104,6 Inch ²\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eDimensions WAGNERTUNING intercooler:  \u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e315 mm x 227 [142] mm x 165 [150] mm [stepped] \/ 12,4 Inch x 8,9 [5,6] Inch x 6,4 [5,9] Inch [stepped]\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eV  =  11,4  L \/ 696 Inch ³  \u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eA  = 715 cm ²\/ 110,8 Inch ²\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003ekit comes with:  \u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e1 intercooler  \u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e1 silicone hose (black)  \u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e1 mounting material  \u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e1 installation instruction\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cimg src=\"https:\/\/www.wagner-tuningshop.de\/_pictures\/flow\/200001145-Temp.jpg\"\u003e\u003cbr\u003e\u003cimg src=\"https:\/\/www.wagner-tuningshop.de\/_pictures\/flow\/200001145-Flow_EN.jpg\"\u003e\u003cdiv\u003e\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Wagner Tuning","offers":[{"title":"Default Title","offer_id":48376241979688,"sku":"WT-200001145","price":689.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/5767\/7352\/files\/wagner-tuning-competition-intercooler-kit-renault-megane-rs-mk4-intercoolers-614.webp?v=1717018832"},{"product_id":"hawk-performance-hps-5-0-high-performance-street-brake-pads-front-megane-rs-gen3-4-1-8-2-0l-08-present","title":"HAWK Performance HPS 5.0 High Performance Street Brake Pads Front Megane RS (Gen3\/4) 1.8-2.0L 08-Present","description":"\u003cp\u003eFor years, engine builders have been pushing motors to the limits of their ability, and at Hawk Performance, we're closer than ever to pushing the ABS Rev Limiter to its limits. The Hawk HPS 5.0 (High Performance Street 5.0) brake pad compound gives your vehicle the greatest possible stopping power and pedal feel without compromising ABS. HPS 5.0 is a Ferro-Carbon compound that provides advanced braking characteristics to enhance the driving experience. This compound combines the safety and quality of aerospace design with the braking technology of motorsports. The results are shorter stopping distances, improved performance under heavy braking conditions, and street car friendly characteristics.\u003c\/p\u003e\n\u003cp\u003eThe Hawk HPS 5.0 is a good choice if you are looking to increase your street performance to the maximum level possible without suffering the adverse side effects of noise and large amounts of brake dust commonly associated with higher performance pads. The HPS 5.0 will provide increased brake torque and operating temperature when compared to the Hawk HPS compound. The HPS 5.0 compound can withstand light track use as long as you are aware of the signs of over-heating and allow proper cool off time when the pads approach their upper temperature. The Hawk HPS 5.0 compound is not a race compound and it can not withstand prolonged race sessions at high temperatures. The HPS 5.0 Compound will be cleaner than most OEM Pads, but produce more brake dust than the Hawk Ceramic and Hawk HPS.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAggressive Torque\u003c\/li\u003e\n\u003cli\u003eGreat Rotor and Pad Wear\u003c\/li\u003e\n\u003cli\u003eSmooth, Predictable Control\u003c\/li\u003e\n\u003cli\u003eHigh Rates of Deceleration\u003c\/li\u003e\n\u003cli\u003eConsistent Release Characteristics\u003c\/li\u003e\n\u003cli\u003e100-750 Deg F Operating Temperature Range\u003c\/li\u003e\n\u003cli\u003e100-550 Deg F Optimal Temperature Range\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv\u003e\n\u003cp\u003eImage is for illustative purposes, actual product may differ.\u003c\/p\u003e\n\u003ch3\u003eHawk Brake Pad Installation Procedure\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eInstall Brake pads properly. Be sure pads are securely positioned in the caliper.\u003c\/li\u003e\n\u003cli\u003eFlush system with fresh brake fluid.\u003c\/li\u003e\n\u003cli\u003eCheck all hydraulic parts for excess wear and tear.\u003c\/li\u003e\n\u003cli\u003eCheck disc for proper thickness, parallelism, and lateral run-out.\u003c\/li\u003e\n\u003cli\u003eCheck disc for scoring or grooves over .012\"\" depth. If either applies, resurfacing or replacement is required.\u003c\/li\u003e\n\u003cli\u003eIf disc does not need resurfacing then contamination from the previous brake pads must be removed. Sand discs with Garnet sandpaper using moderate pressure. Use soap and water to clean off disc surface after sanding and machining. Discs should be free and clear of oil, grease, and brake fluid\u003c\/li\u003e\n\u003cli\u003eInspect calipers for freedom of movement. Lubricate where necessary\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eHawk Brake Pad Bedding Procedure - Street Compounds\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMake 6-10 slow-downs from approximately 30-35 mph to 5 mph. applying moderate pressure. Do not come to a complete stop.\u003c\/li\u003e\n\u003cli\u003eMake an additional 2 to 3 harder stops from approximately 40-45 mph. to zero.\u003c\/li\u003e\n\u003cli\u003eDO NOT DRAG THE BRAKES! (after stopping - do not leave your foot on the brake pedal)\u003c\/li\u003e\n\u003cli\u003eAllow 15 minutes or more for the brake system to cool down.\u003c\/li\u003e\n\u003cli\u003eYour new Hawk pads are ready for use.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eLimited Lifetime Warranty\u003c\/h3\u003e\n\u003cp\u003eCarlisle Brake \u0026amp; Friction (CBF) warrants Hawk Performance branded products to be free of defects from workmanship and materials. This warranty does not apply to normal wear or damage caused by negligence, lack of maintenance, accident, abnormal operations, or improper installation or service. CBF does not make any other warranty claims, either expressed or implied, including the implied warranties of merchantability or fitness for a particular purpose. In no event will CBF\/Hawk Performance be liable for incidental or consequential damages of any kind, whether such damages are claimed on account of breach of warranty, breach of contract, negligence, or strict product liability. This includes without limitation, damage to property, or other economic losses that may be incurred. Any, and all, warranty claims must be processed through CBF. All valid warranty claims will be replaced and\/or reimbursed with Hawk Performance branded products of equal or greater value.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e* Disclaimer to Limited Life-Time Warranty: Motorsports brake pads and rotors are developed for high performance events. Racing is a dangerous sport. Hawk Performance racing brake pads and rotors are sold without warranty expressed or implied. No warranty or representation is made as to this products ability to protect the user from injury or death. The user assumes that risk.\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/div\u003e","brand":"HAWK Performance","offers":[{"title":"Default Title","offer_id":48978906972456,"sku":"HWK-HB453B.585","price":170.04,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/5767\/7352\/files\/hawk-performance-hps-5-0-high-street-brake-pads-front-megane-rs-gen3-4-1-8-2-0l-08-present-565.webp?v=1721902340"},{"product_id":"hawk-performance-pc-performance-ceramic-street-brake-pads-front-megane-rs-gen3-4-1-8-2-0l-08-present","title":"HAWK Performance PC Performance Ceramic Street Brake Pads Front Megane RS (Gen3\/4) 1.8-2.0L 08-Present","description":"\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cp\u003eHawk understands the needs of today's ceramic brake pad users and has specifically formulated our composite material to meet - and beat - the stringent low noise, ultra-low dust performance standards they have set. Engineered to reduce brake NVH (Noise, Vibration and Harshness),Hawk PC (Performance Ceramic) is a premium disc brake pad that delivers excellent performance mile after mile. Providing a linear friction profile that allows your vehicle's ABS system to operate most effectively, the unique compound has the advantage of never sacrificing power to achieve traditional ceramic pad attributes. With Hawk's PC, you can expect reduced brake pad wear, longer rotor life, and our quietest ride ever.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cp\u003eThe Hawk PC (Performance Ceramic) is a great compound when your top priority is to minimize brake dust. This compound is a very popular replacement for OEM Brembo packages supplied on performance vehicles such as Corvettes, Mustangs, Challengers, Chargers, Subaru STI, and many others. If you are not looking to have increased brake performance over the stock level and want to virtually eliminate brake dust, the Hawk Performance Ceramic is what you are looking for.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003eExtremely Quite\u003c\/li\u003e\n\u003cli\u003eUltra-low Dust\u003c\/li\u003e\n\u003cli\u003eImproved Stopping Power\u003c\/li\u003e\n\u003cli\u003eGentle on rotors\u003c\/li\u003e\n\u003cli\u003eStable Friction Output\u003c\/li\u003e\n\u003cli\u003e100-650 Deg F Operating Temperature Range\u003c\/li\u003e\n\u003cli\u003e100-450 Deg F Optimal Temperature Range\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cp\u003eImage is for illustative purposes, actual product may differ.\u003c\/p\u003e\n\u003ch3\u003eHawk Brake Pad Installation Procedure\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eInstall Brake pads properly. Be sure pads are securely positioned in the caliper.\u003c\/li\u003e\n\u003cli\u003eFlush system with fresh brake fluid.\u003c\/li\u003e\n\u003cli\u003eCheck all hydraulic parts for excess wear and tear.\u003c\/li\u003e\n\u003cli\u003eCheck disc for proper thickness, parallelism, and lateral run-out.\u003c\/li\u003e\n\u003cli\u003eCheck disc for scoring or grooves over .012\"\" depth. If either applies, resurfacing or replacement is required.\u003c\/li\u003e\n\u003cli\u003eIf disc does not need resurfacing then contamination from the previous brake pads must be removed. Sand discs with Garnet sandpaper using moderate pressure. Use soap and water to clean off disc surface after sanding and machining. Discs should be free and clear of oil, grease, and brake fluid\u003c\/li\u003e\n\u003cli\u003eInspect calipers for freedom of movement. Lubricate where necessary\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eHawk Brake Pad Bedding Procedure - Street Compounds\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMake 6-10 slow-downs from approximately 30-35 mph to 5 mph. applying moderate pressure. Do not come to a complete stop.\u003c\/li\u003e\n\u003cli\u003eMake an additional 2 to 3 harder stops from approximately 40-45 mph. to zero.\u003c\/li\u003e\n\u003cli\u003eDO NOT DRAG THE BRAKES! (after stopping - do not leave your foot on the brake pedal)\u003c\/li\u003e\n\u003cli\u003eAllow 15 minutes or more for the brake system to cool down.\u003c\/li\u003e\n\u003cli\u003eYour new Hawk pads are ready for use.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eLimited Lifetime Warranty\u003c\/h3\u003e\n\u003cp\u003eCarlisle Brake \u0026amp; Friction (CBF) warrants Hawk Performance branded products to be free of defects from workmanship and materials. This warranty does not apply to normal wear or damage caused by negligence, lack of maintenance, accident, abnormal operations, or improper installation or service. CBF does not make any other warranty claims, either expressed or implied, including the implied warranties of merchantability or fitness for a particular purpose. In no event will CBF\/Hawk Performance be liable for incidental or consequential damages of any kind, whether such damages are claimed on account of breach of warranty, breach of contract, negligence, or strict product liability. This includes without limitation, damage to property, or other economic losses that may be incurred. Any, and all, warranty claims must be processed through CBF. All valid warranty claims will be replaced and\/or reimbursed with Hawk Performance branded products of equal or greater value.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e* Disclaimer to Limited Life-Time Warranty: Motorsports brake pads and rotors are developed for high performance events. Racing is a dangerous sport. Hawk Performance racing brake pads and rotors are sold without warranty expressed or implied. No warranty or representation is made as to this products ability to protect the user from injury or death. The user assumes that risk.\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/div\u003e","brand":"HAWK Performance","offers":[{"title":"Default Title","offer_id":48978907037992,"sku":"HWK-HB453Z.585","price":175.18,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/5767\/7352\/files\/hawk-performance-pc-ceramic-street-brake-pads-front-megane-rs-gen3-4-1-8-2-0l-08-present-213.webp?v=1752150128"},{"product_id":"hawk-performance-hps-high-performance-street-brake-pads-front-megane-rs-gen3-4-1-8-2-0l-08-present","title":"HAWK Performance HPS High Performance Street Brake Pads Front Megane RS (Gen3\/4) 1.8-2.0L 08-Present","description":"\u003cdiv\u003e\n\u003cp\u003eHawk HPS (High Performance Street) brake pads are world renowned for increasing stopping power on your street driven vehicle. Increasing the performance of your vehicles braking system is easy when you choose Hawk Performance's HPS braking compound. This unique Ferro-Carbon formula was developed for street performance using the safety and quality of Aerospace and Motorsports severe-duty friction technology. The High Performance Street compound offers a higher coefficient of friction over stock brake pads and can provide you 20-40% more stopping power and higher resistance to brake fade than most standard replacement pads. Less fade means you'll have a highly durable brake pad with less brake dust.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cp\u003eThe Hawk HPS compound, in most cases, will provide increased brake torque and operating temperature when compared to OEM pads. There will also be a decrease in brake dust. With an upper end operating temperature of 800-900 Deg F, the HPS compound can withstand light track use as long as you are aware of the signs of over-heating and allow proper cool off time when the pads approach their upper temperature. The Hawk HPS compound is not a race compound and it can not withstand prolonged race sessions at high temperatures. Concerning brake dust, the HPS will be cleaner than your OEM Pads, but create more dust than the Hawk Ceramic compound. The performance improvement over Hawk Ceramic comes at the cost of increased dust production.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003eSmooth braking Feel\u003c\/li\u003e\n\u003cli\u003eExcellent for Spirited Driving\u003c\/li\u003e\n\u003cli\u003eGentle on Pads and Rotors\u003c\/li\u003e\n\u003cli\u003eConsistent Release Characteristics\u003c\/li\u003e\n\u003cli\u003eIncreased Stopping Power\u003c\/li\u003e\n\u003cli\u003e100-700 Deg F Operating Temperature Range\u003c\/li\u003e\n\u003cli\u003e100-500 Deg F Optimal Temperature Range\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eImage is for illustative purposes, actual product may differ.\u003c\/p\u003e\n\u003ch3\u003eHawk Brake Pad Installation Procedure\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eInstall Brake pads properly. Be sure pads are securely positioned in the caliper.\u003c\/li\u003e\n\u003cli\u003eFlush system with fresh brake fluid.\u003c\/li\u003e\n\u003cli\u003eCheck all hydraulic parts for excess wear and tear.\u003c\/li\u003e\n\u003cli\u003eCheck disc for proper thickness, parallelism, and lateral run-out.\u003c\/li\u003e\n\u003cli\u003eCheck disc for scoring or grooves over .012\"\" depth. If either applies, resurfacing or replacement is required.\u003c\/li\u003e\n\u003cli\u003eIf disc does not need resurfacing then contamination from the previous brake pads must be removed. Sand discs with Garnet sandpaper using moderate pressure. Use soap and water to clean off disc surface after sanding and machining. Discs should be free and clear of oil, grease, and brake fluid\u003c\/li\u003e\n\u003cli\u003eInspect calipers for freedom of movement. Lubricate where necessary\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eHawk Brake Pad Bedding Procedure - Street Compounds\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMake 6-10 slow-downs from approximately 30-35 mph to 5 mph. applying moderate pressure. Do not come to a complete stop.\u003c\/li\u003e\n\u003cli\u003eMake an additional 2 to 3 harder stops from approximately 40-45 mph. to zero.\u003c\/li\u003e\n\u003cli\u003eDO NOT DRAG THE BRAKES! (after stopping - do not leave your foot on the brake pedal)\u003c\/li\u003e\n\u003cli\u003eAllow 15 minutes or more for the brake system to cool down.\u003c\/li\u003e\n\u003cli\u003eYour new Hawk pads are ready for use.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eLimited Lifetime Warranty\u003c\/h3\u003e\n\u003cp\u003eCarlisle Brake \u0026amp; Friction (CBF) warrants Hawk Performance branded products to be free of defects from workmanship and materials. This warranty does not apply to normal wear or damage caused by negligence, lack of maintenance, accident, abnormal operations, or improper installation or service. CBF does not make any other warranty claims, either expressed or implied, including the implied warranties of merchantability or fitness for a particular purpose. In no event will CBF\/Hawk Performance be liable for incidental or consequential damages of any kind, whether such damages are claimed on account of breach of warranty, breach of contract, negligence, or strict product liability. This includes without limitation, damage to property, or other economic losses that may be incurred. Any, and all, warranty claims must be processed through CBF. All valid warranty claims will be replaced and\/or reimbursed with Hawk Performance branded products of equal or greater value.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e* Disclaimer to Limited Life-Time Warranty: Motorsports brake pads and rotors are developed for high performance events. Racing is a dangerous sport. Hawk Performance racing brake pads and rotors are sold without warranty expressed or implied. No warranty or representation is made as to this products ability to protect the user from injury or death. The user assumes that risk.\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/div\u003e","brand":"HAWK Performance","offers":[{"title":"Default Title","offer_id":48978907070760,"sku":"HWK-HB453F.585","price":162.36,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/5767\/7352\/files\/hawk-performance-hps-high-street-brake-pads-front-megane-rs-gen3-4-1-8-2-0l-08-present-441.webp?v=1721902339"},{"product_id":"hawk-performance-blue-9012-motorsports-brake-pads-front-megane-rs-gen3-4-1-8-2-0l-08-present","title":"HAWK Performance Blue 9012 Motorsports Brake Pads Front Megane RS (Gen3\/4) 1.8-2.0L 08-Present","description":"\u003cdiv\u003e\n\u003cp\u003eDesigned as an entry level endurance compound, there's nothing second-string about Hawk's Blue 9012 race compound. Easier to bed in and delivering excellent pad and rotor life, Blue 9012 is a medium torque pad developed specifically for Road, Rally and Circle Track racing.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003eEndurance Compound\u003c\/li\u003e\n\u003cli\u003eMedium Friction\u003c\/li\u003e\n\u003cli\u003eIntermediate Initial Bite\u003c\/li\u003e\n\u003cli\u003eIncreased Mid-Mu Characteristics\u003c\/li\u003e\n\u003cli\u003e250-1000 Deg F Operating Temperature Range\u003c\/li\u003e\n\u003cli\u003e350-800 Deg F Optimal Temperature Range\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003ch3\u003eHawk Brake Pad Installation Procedure\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eInstall Brake pads properly. Be sure pads are securely positioned in the caliper.\u003c\/li\u003e\n\u003cli\u003eFlush system with fresh brake fluid.\u003c\/li\u003e\n\u003cli\u003eCheck all hydraulic parts for excess wear and tear.\u003c\/li\u003e\n\u003cli\u003eCheck disc for proper thickness, parallelism, and lateral run-out.\u003c\/li\u003e\n\u003cli\u003eCheck disc for scoring or grooves over .012\"\" depth. If either applies, resurfacing or replacement is required.\u003c\/li\u003e\n\u003cli\u003eIf disc does not need resurfacing then contamination from the previous brake pads must be removed. Sand discs with Garnet sandpaper using moderate pressure. Use soap and water to clean off disc surface after sanding and machining. Discs should be free and clear of oil, grease, and brake fluid\u003c\/li\u003e\n\u003cli\u003eInspect calipers for freedom of movement. Lubricate where necessary\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eHawk Brake Pad Bedding Procedure - Motorsports Pads\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAfter reaching medium speed engage brake pedal to slow car without coming to a complete stop. Release pedal quickly and do not drag brakes. Repeat four or five times.\u003c\/li\u003e\n\u003cli\u003eAt higher speeds engage brake pedal to slow car without coming to a complete stop. Release pedal quickly and do not drag brakes. Repeat five times.\u003c\/li\u003e\n\u003cli\u003eAt or near race speed engage brake pedal to slow car without coming to a complete stop. Release pedal quickly and do not drag brakes. Repeat three times. Allow a few seconds between brake engagements while car is in motion.\u003c\/li\u003e\n\u003cli\u003eDo not hold brake pedal. Park car for approximately 20 minutes or until brake rotors are completely cool to the touch.\u003c\/li\u003e\n\u003cli\u003eIf during the above steps the brake pedal becomes soft or brake fade is noticed, park the car immediately for approximately 20 minutes. Do not hold brake pedal.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eImportant Reminders when Burnishing or Bedding Brake Pads\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eDo not attempt to use badly worn or damaged rotors with new brake pads.\u003c\/li\u003e\n\u003cli\u003eDo not drag brakes while car is moving during break-in procedure.\u003c\/li\u003e\n\u003cli\u003eDo not engage pedal while car is stopped at any time following the break-in procedure.\u003c\/li\u003e\n\u003cli\u003eUpon completing the procedure, allow the brake system to completely cool before racing.\u003c\/li\u003e\n\u003cli\u003eApplying the pedal a few times before the start of the race will allow the brake pads to heat up before attempting to reach race speeds.\u003c\/li\u003e\n\u003cli\u003eClean a used rotor surface with fine sand paper or steel wool, rinse with water, dry and install before bedding new pads.\u003c\/li\u003e\n\u003cli\u003eSome forms of racing do not allow time for the proper break-in procedure to be performed. However, it is still very important to attempt to perform at least the core of the procedure: Build up heat slowly and allow the system to completely cool down before racing if possible.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eLimited Lifetime Warranty\u003c\/h3\u003e\n\u003cp\u003eCarlisle Brake \u0026amp; Friction (CBF) warrants Hawk Performance branded products to be free of defects from workmanship and materials. This warranty does not apply to normal wear or damage caused by negligence, lack of maintenance, accident, abnormal operations, or improper installation or service. CBF does not make any other warranty claims, either expressed or implied, including the implied warranties of merchantability or fitness for a particular purpose. In no event will CBF\/Hawk Performance be liable for incidental or consequential damages of any kind, whether such damages are claimed on account of breach of warranty, breach of contract, negligence, or strict product liability. This includes without limitation, damage to property, or other economic losses that may be incurred. Any, and all, warranty claims must be processed through CBF. All valid warranty claims will be replaced and\/or reimbursed with Hawk Performance branded products of equal or greater value.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e* Disclaimer to Limited Life-Time Warranty: Motorsports brake pads and rotors are developed for high performance events. Racing is a dangerous sport. Hawk Performance racing brake pads and rotors are sold without warranty expressed or implied. No warranty or representation is made as to this products ability to protect the user from injury or death. The user assumes that risk.\u003c\/strong\u003e\u003c\/p\u003e","brand":"HAWK Performance","offers":[{"title":"Default Title","offer_id":48978907103528,"sku":"HWK-HB453E.585","price":276.26,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/5767\/7352\/files\/hawk-performance-blue-9012-motorsports-brake-pads-front-megane-rs-gen3-4-1-8-2-0l-08-present-118.webp?v=1721902338"},{"product_id":"hawk-performance-hp-plus-road-and-track-brake-pads-front-megane-rs-gen3-4-1-8-2-0l-08-present","title":"HAWK Performance HP Plus Road and Track Brake Pads Front Megane RS (Gen3\/4) 1.8-2.0L 08-Present","description":"\u003cdiv\u003e\n\u003cp\u003eThe Hawk Performance HP Plus brake pad compound is ideal for Autocross and Track Day drivers looking for a high performance race compound that can take the heat of the track and get you home safely without having to change the pads. HP Plus utilizes a unique Ferro-Carbon, High-Tech friction material that was developed and manufactured for sport driving in autocross, Solo II, and track day applications. The Ferro-Carbon formulation offers lower wear rates and higher torque values than other competitive materials.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cp\u003eHP Plus is popular with enthusiasts that are looking for excellent street performance or wanting take their car auto-crossing or to a track day and not have to worry about changing pads. The HP Plus will provide a very noticeable increase in brake torque and temperature range when compared to OEM pads. Usually recommended to beginners who have very little to no track experience and are looking for an upgrade over stock.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003eLow to Mid Temperature Range\u003c\/li\u003e\n\u003cli\u003eFade Resistant\u003c\/li\u003e\n\u003cli\u003eSmooth, Predictable Torque\u003c\/li\u003e\n\u003cli\u003eIdeal for Autocross\u003c\/li\u003e\n\u003cli\u003e100-800 Deg F Operating Temperature Range\u003c\/li\u003e\n\u003cli\u003e300-600 Deg F Optimal Temperature Range\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eImage is for illustative purposes, actual product may differ.\u003c\/p\u003e\n\u003ch3\u003eHawk Brake Pad Installation Procedure\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eInstall Brake pads properly. Be sure pads are securely positioned in the caliper.\u003c\/li\u003e\n\u003cli\u003eFlush system with fresh brake fluid.\u003c\/li\u003e\n\u003cli\u003eCheck all hydraulic parts for excess wear and tear.\u003c\/li\u003e\n\u003cli\u003eCheck disc for proper thickness, parallelism, and lateral run-out.\u003c\/li\u003e\n\u003cli\u003eCheck disc for scoring or grooves over .012\"\" depth. If either applies, resurfacing or replacement is required.\u003c\/li\u003e\n\u003cli\u003eIf disc does not need resurfacing then contamination from the previous brake pads must be removed. Sand discs with Garnet sandpaper using moderate pressure. Use soap and water to clean off disc surface after sanding and machining. Discs should be free and clear of oil, grease, and brake fluid\u003c\/li\u003e\n\u003cli\u003eInspect calipers for freedom of movement. Lubricate where necessary\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eHawk Brake Pad Bedding Procedure - Street Compounds\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMake 6-10 slow-downs from approximately 30-35 mph to 5 mph. applying moderate pressure. Do not come to a complete stop.\u003c\/li\u003e\n\u003cli\u003eMake an additional 2 to 3 harder stops from approximately 40-45 mph. to zero.\u003c\/li\u003e\n\u003cli\u003eDO NOT DRAG THE BRAKES! (after stopping - do not leave your foot on the brake pedal)\u003c\/li\u003e\n\u003cli\u003eAllow 15 minutes or more for the brake system to cool down.\u003c\/li\u003e\n\u003cli\u003eYour new Hawk pads are ready for use.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eLimited Lifetime Warranty\u003c\/h3\u003e\n\u003cp\u003eCarlisle Brake \u0026amp; Friction (CBF) warrants Hawk Performance branded products to be free of defects from workmanship and materials. This warranty does not apply to normal wear or damage caused by negligence, lack of maintenance, accident, abnormal operations, or improper installation or service. CBF does not make any other warranty claims, either expressed or implied, including the implied warranties of merchantability or fitness for a particular purpose. In no event will CBF\/Hawk Performance be liable for incidental or consequential damages of any kind, whether such damages are claimed on account of breach of warranty, breach of contract, negligence, or strict product liability. This includes without limitation, damage to property, or other economic losses that may be incurred. Any, and all, warranty claims must be processed through CBF. All valid warranty claims will be replaced and\/or reimbursed with Hawk Performance branded products of equal or greater value.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e* Disclaimer to Limited Life-Time Warranty: Motorsports brake pads and rotors are developed for high performance events. Racing is a dangerous sport. Hawk Performance racing brake pads and rotors are sold without warranty expressed or implied. No warranty or representation is made as to this products ability to protect the user from injury or death. The user assumes that risk.\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/div\u003e","brand":"HAWK Performance","offers":[{"title":"Default Title","offer_id":48978907136296,"sku":"HWK-HB453N.585","price":190.56,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/5767\/7352\/files\/hawk-performance-hp-plus-road-and-track-brake-pads-front-megane-rs-gen3-4-1-8-2-0l-08-present-257.webp?v=1721902341"},{"product_id":"hawk-performance-dtc-60-motorsports-brake-pads-front-megane-rs-gen3-4-1-8-2-0l-08-present","title":"HAWK Performance DTC-60 Motorsports Brake Pads Front Megane RS (Gen3\/4) 1.8-2.0L 08-Present","description":"\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cp\u003eRunning with extremely high deceleration rates and increased downforce poses different challenges, so Hawk designed DTC-60 race compound. Recommended with DTC-70 when split friction between axles is desired, it has excellent modulation and release characteristics.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cp\u003eDTC-60 has the same temperature range as DTC-70, but produces less brake torque. Many racers of lighter, smaller cars such as the Miata and S2000 will run DTC-60 Front and DTC-30 Rear. On larger, heavier, cars such as Corvettes, Mustangs, Porsches, BMWs and other specialty race cars, the DTC-60 is run on the rear with DTC-70 up front. This is not an entry level race compound and should not be driven on the street. Use when you are a serious racer with track experience and have had issues with less aggressive compounds overheating or not providing enough bite.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003eSuperior Release and Torque Control\u003c\/li\u003e\n\u003cli\u003eVery Low Pad and Rotor Wear\u003c\/li\u003e\n\u003cli\u003eHigh Torque\u003c\/li\u003e\n\u003cli\u003eExcellent Modulation and Release Characteristics\u003c\/li\u003e\n\u003cli\u003eApplicable to NASCAR, NASCAR modified, ARCA, Super Late models, pavement circle track, Pro 2, Pro 4 Off Road Trucks, Pro Lite, Sports Car, GT, GS, Open Wheel, Formula, Monster Trucks\u003c\/li\u003e\n\u003cli\u003eStable Friction Output\u003c\/li\u003e\n\u003cli\u003e400-1600 Deg F Operating Temperature Range\u003c\/li\u003e\n\u003cli\u003e600-1200 Deg F Optimal Temperature Range\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eFor motorsport use only. Image is for illustative purposes, actual product may differ.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003ch3\u003eHawk Brake Pad Installation Procedure\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eInstall Brake pads properly. Be sure pads are securely positioned in the caliper.\u003c\/li\u003e\n\u003cli\u003eFlush system with fresh brake fluid.\u003c\/li\u003e\n\u003cli\u003eCheck all hydraulic parts for excess wear and tear.\u003c\/li\u003e\n\u003cli\u003eCheck disc for proper thickness, parallelism, and lateral run-out.\u003c\/li\u003e\n\u003cli\u003eCheck disc for scoring or grooves over .012\"\" depth. If either applies, resurfacing or replacement is required.\u003c\/li\u003e\n\u003cli\u003eIf disc does not need resurfacing then contamination from the previous brake pads must be removed. Sand discs with Garnet sandpaper using moderate pressure. Use soap and water to clean off disc surface after sanding and machining. Discs should be free and clear of oil, grease, and brake fluid\u003c\/li\u003e\n\u003cli\u003eInspect calipers for freedom of movement. Lubricate where necessary\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eHawk Brake Pad Bedding Procedure - Motorsports Pads\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAfter reaching medium speed engage brake pedal to slow car without coming to a complete stop. Release pedal quickly and do not drag brakes. Repeat four or five times.\u003c\/li\u003e\n\u003cli\u003eAt higher speeds engage brake pedal to slow car without coming to a complete stop. Release pedal quickly and do not drag brakes. Repeat five times.\u003c\/li\u003e\n\u003cli\u003eAt or near race speed engage brake pedal to slow car without coming to a complete stop. Release pedal quickly and do not drag brakes. Repeat three times. Allow a few seconds between brake engagements while car is in motion.\u003c\/li\u003e\n\u003cli\u003eDo not hold brake pedal. Park car for approximately 20 minutes or until brake rotors are completely cool to the touch.\u003c\/li\u003e\n\u003cli\u003eIf during the above steps the brake pedal becomes soft or brake fade is noticed, park the car immediately for approximately 20 minutes. Do not hold brake pedal.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eImportant Reminders when Burnishing or Bedding Brake Pads\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eDo not attempt to use badly worn or damaged rotors with new brake pads.\u003c\/li\u003e\n\u003cli\u003eDo not drag brakes while car is moving during break-in procedure.\u003c\/li\u003e\n\u003cli\u003eDo not engage pedal while car is stopped at any time following the break-in procedure.\u003c\/li\u003e\n\u003cli\u003eUpon completing the procedure, allow the brake system to completely cool before racing.\u003c\/li\u003e\n\u003cli\u003eApplying the pedal a few times before the start of the race will allow the brake pads to heat up before attempting to reach race speeds.\u003c\/li\u003e\nli\u0026gt;Clean a used rotor surface with fine sand paper or steel wool, rinse with water, dry and install before bedding new pads\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"HAWK Performance","offers":[{"title":"Default Title","offer_id":48978907463976,"sku":"HWK-HB453G.585","price":394.66,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/5767\/7352\/files\/hawk-performance-dtc-60-motorsports-brake-pads-front-megane-rs-gen3-4-1-8-2-0l-08-present-841.webp?v=1721902345"},{"product_id":"hawk-performance-dtc-80-motorsports-brake-pads-front-megane-rs-gen3-4-1-8-2-0l-08-present","title":"HAWK Performance DTC-80 Motorsports Brake Pads Front Megane RS (Gen3\/4) 1.8-2.0L 08-Present","description":"\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cp\u003eHawk Performance products have dominated motorsports for more than 25 years, and this revolutionary compound is taking that domination to a new level. Intended for the hardest braking circuits where the most demanding brake products are required, Hawk DTC-80 is a compound engineered for use on all circle track and road racing venues where a high torque, high temperature-resilient friction material is a must. With a formulated flat coefficient of friction at high temperature levels, DTC-80 provides consistent performance corner after corner. Track tested and proven effective, this formulation offers lower wear rates and higher torque values than other competitive materials on the market today. The end results are better car control, more confident brake zone feel, and stunningly predictable performance.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cp\u003eThe DTC-80 has a higher temperature and generates more brake torque than the DTC-70. If you have been over-heating the DTC-70 or it is not giving you the torque you need, give the DTC-80 a try.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003eHigh Initial Bite\u003c\/li\u003e\n\u003cli\u003eHigh Torque\u003c\/li\u003e\n\u003cli\u003eConsistent Brake Torque over Temperature Range\u003c\/li\u003e\n\u003cli\u003eSuperior pad and Rotor Wear\u003c\/li\u003e\n\u003cli\u003eApplicable to NASCAR, NASCAR modified, ARCA, Super Late models, pavement circle track, Pro 2, Pro 4 Off Road Trucks, Pro Lite, Sports Car, GT, GS, Open Wheel, Formula, Monster Trucks\u003c\/li\u003e\n\u003cli\u003e500-1700 Deg F Operating Temperature Range\u003c\/li\u003e\n\u003cli\u003e600-1500 Deg F Optimal Temperature Range\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eFor motorsport use only. Image is for illustative purposes, actual product may differ.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003ch3\u003eHawk Brake Pad Installation Procedure\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eInstall Brake pads properly. Be sure pads are securely positioned in the caliper.\u003c\/li\u003e\n\u003cli\u003eFlush system with fresh brake fluid.\u003c\/li\u003e\n\u003cli\u003eCheck all hydraulic parts for excess wear and tear.\u003c\/li\u003e\n\u003cli\u003eCheck disc for proper thickness, parallelism, and lateral run-out.\u003c\/li\u003e\n\u003cli\u003eCheck disc for scoring or grooves over .012\"\" depth. If either applies, resurfacing or replacement is required.\u003c\/li\u003e\n\u003cli\u003eIf disc does not need resurfacing then contamination from the previous brake pads must be removed. Sand discs with Garnet sandpaper using moderate pressure. Use soap and water to clean off disc surface after sanding and machining. Discs should be free and clear of oil, grease, and brake fluid\u003c\/li\u003e\n\u003cli\u003eInspect calipers for freedom of movement. Lubricate where necessary\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eHawk Brake Pad Bedding Procedure - Motorsports Pads\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAfter reaching medium speed engage brake pedal to slow car without coming to a complete stop. Release pedal quickly and do not drag brakes. Repeat four or five times.\u003c\/li\u003e\n\u003cli\u003eAt higher speeds engage brake pedal to slow car without coming to a complete stop. Release pedal quickly and do not drag brakes. Repeat five times.\u003c\/li\u003e\n\u003cli\u003eAt or near race speed engage brake pedal to slow car without coming to a complete stop. Release pedal quickly and do not drag brakes. Repeat three times. Allow a few seconds between brake engagements while car is in motion.\u003c\/li\u003e\n\u003cli\u003eDo not hold brake pedal. Park car for approximately 20 minutes or until brake rotors are completely cool to the touch.\u003c\/li\u003e\n\u003cli\u003eIf during the above steps the brake pedal becomes soft or brake fade is noticed, park the car immediately for approximately 20 minutes. Do not hold brake pedal.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eImportant Reminders when Burnishing or Bedding Brake Pads\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eDo not attempt to use badly worn or damaged rotors with new brake pads.\u003c\/li\u003e\n\u003cli\u003eDo not drag brakes while car is moving during break-in procedure.\u003c\/li\u003e\n\u003cli\u003eDo not engage pedal while car is stopped at any time following the break-in procedure.\u003c\/li\u003e\n\u003cli\u003eUpon completing the procedure, allow the brake system to completely cool before racing.\u003c\/li\u003e\n\u003cli\u003eApplying the pedal a few times before the start of the race will allow the brake pads to heat up before attempting to reach race speeds.\u003c\/li\u003e\nli\u0026gt;Clean a used rotor surface with fine sand paper or steel wool, rinse with water, dry and install before bedding new pads\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"HAWK Performance","offers":[{"title":"Default Title","offer_id":48978907529512,"sku":"HWK-HB453Q.585","price":567.9,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/5767\/7352\/files\/hawk-performance-dtc-80-motorsports-brake-pads-front-megane-rs-gen3-4-1-8-2-0l-08-present-342.webp?v=1721902345"},{"product_id":"hawk-performance-ht-10-motorsports-brake-pads-front-megane-rs-gen3-4-1-8-2-0l-08-present","title":"HAWK Performance HT-10 Motorsports Brake Pads Front Megane RS (Gen3\/4) 1.8-2.0L 08-Present","description":"\u003cdiv\u003e\n\u003cp\u003eFor linear in-braking in a medium temperature range, look no further than HT-10. It delivers smooth, controllable initial bite and consistent pedal feel. It's no wonder Hawk's legacy friction products have become the choice of champions.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cul\u003e\n\u003cli\u003eGood Static and Dynamic Coefficient of Friction\u003c\/li\u003e\n\u003cli\u003eExcellent modulation characteristics\u003c\/li\u003e\n\u003cli\u003e300-1300 Deg F Operating Temperature Range\u003c\/li\u003e\n\u003cli\u003e300-1100 Deg F Optimal Temperature Range\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv\u003e\n\u003cp\u003eImage is for illustative purposes, actual product may differ.\u003c\/p\u003e\n\u003ch3\u003eHawk Brake Pad Installation Procedure\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eInstall Brake pads properly. Be sure pads are securely positioned in the caliper.\u003c\/li\u003e\n\u003cli\u003eFlush system with fresh brake fluid.\u003c\/li\u003e\n\u003cli\u003eCheck all hydraulic parts for excess wear and tear.\u003c\/li\u003e\n\u003cli\u003eCheck disc for proper thickness, parallelism, and lateral run-out.\u003c\/li\u003e\n\u003cli\u003eCheck disc for scoring or grooves over .012\"\" depth. If either applies, resurfacing or replacement is required.\u003c\/li\u003e\n\u003cli\u003eIf disc does not need resurfacing then contamination from the previous brake pads must be removed. Sand discs with Garnet sandpaper using moderate pressure. Use soap and water to clean off disc surface after sanding and machining. Discs should be free and clear of oil, grease, and brake fluid\u003c\/li\u003e\n\u003cli\u003eInspect calipers for freedom of movement. Lubricate where necessary\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eHawk Brake Pad Bedding Procedure - Motorsports Pads\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAfter reaching medium speed engage brake pedal to slow car without coming to a complete stop. Release pedal quickly and do not drag brakes. Repeat four or five times.\u003c\/li\u003e\n\u003cli\u003eAt higher speeds engage brake pedal to slow car without coming to a complete stop. Release pedal quickly and do not drag brakes. Repeat five times.\u003c\/li\u003e\n\u003cli\u003eAt or near race speed engage brake pedal to slow car without coming to a complete stop. Release pedal quickly and do not drag brakes. Repeat three times. Allow a few seconds between brake engagements while car is in motion.\u003c\/li\u003e\n\u003cli\u003eDo not hold brake pedal. Park car for approximately 20 minutes or until brake rotors are completely cool to the touch.\u003c\/li\u003e\n\u003cli\u003eIf during the above steps the brake pedal becomes soft or brake fade is noticed, park the car immediately for approximately 20 minutes. Do not hold brake pedal.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eImportant Reminders when Burnishing or Bedding Brake Pads\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eDo not attempt to use badly worn or damaged rotors with new brake pads.\u003c\/li\u003e\n\u003cli\u003eDo not drag brakes while car is moving during break-in procedure.\u003c\/li\u003e\n\u003cli\u003eDo not engage pedal while car is stopped at any time following the break-in procedure.\u003c\/li\u003e\n\u003cli\u003eUpon completing the procedure, allow the brake system to completely cool before racing.\u003c\/li\u003e\n\u003cli\u003eApplying the pedal a few times before the start of the race will allow the brake pads to heat up before attempting to reach race speeds.\u003c\/li\u003e\nli\u0026gt;Clean a used rotor surface with fine sand paper or steel wool, rinse with water, dry and install before bedding new pads\n\u003cli\u003eSome forms of racing do not allow time for the proper break-in procedure to be performed. However, it is still very important to attempt to perform at least the core of the procedure: Build up heat slowly and allow the system to completely cool down before racing if possible.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eLimited Lifetime Warranty\u003c\/h3\u003e\n\u003cp\u003eCarlisle Brake \u0026amp; Friction (CBF) warrants Hawk Performance branded products to be free of defects from workmanship and materials. This warranty does not apply to normal wear or damage caused by negligence, lack of maintenance, accident, abnormal operations, or improper installation or service. CBF does not make any other warranty claims, either expressed or implied, including the implied warranties of merchantability or fitness for a particular purpose. In no event will CBF\/Hawk Performance be liable for incidental or consequential damages of any kind, whether such damages are claimed on account of breach of warranty, breach of contract, negligence, or strict product liability. This includes without limitation, damage to property, or other economic losses that may be incurred. Any, and all, warranty claims must be processed through CBF. All valid warranty claims will be replaced and\/or reimbursed with Hawk Performance branded products of equal or greater value.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e* Disclaimer to Limited Life-Time Warranty: Motorsports brake pads and rotors are developed for high performance events. Racing is a dangerous sport. Hawk Performance racing brake pads and rotors are sold without warranty expressed or implied. No warranty or representation is made as to this products ability to protect the user from injury or death. The user assumes that risk.\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/div\u003e","brand":"HAWK Performance","offers":[{"title":"Default Title","offer_id":48978907562280,"sku":"HWK-HB453S.585","price":320.12,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/5767\/7352\/files\/hawk-performance-ht-10-motorsports-brake-pads-front-megane-rs-gen3-4-1-8-2-0l-08-present-440.webp?v=1721902348"},{"product_id":"hawk-performance-dtc-70-motorsports-brake-pads-front-megane-rs-gen3-4-1-8-2-0l-08-present","title":"HAWK Performance DTC-70 Motorsports Brake Pads Front Megane RS (Gen3\/4) 1.8-2.0L 08-Present","description":"\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cp\u003eThe Hawk DTC-70 race compound was engineered with extremely high torque and highly aggressive initial bite for cars with high deceleration rates, with or without downforce. With superior release and control characteristics, it's a winning race solution on its own or as split friction with DTC-60.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cp\u003eDTC-70 is more aggressive than the DTC-60 but has the same temperature range. Many racers of Corvettes, Mustangs, Porsches, BMWs and other specialty race cars choose to run DTC-70 Front and DTC-60 rear. This is not an entry level race compound and should not be driven on the street. Use when you are a serious racer with track experience and have had issues with less aggressive compounds overheating or not providing enough bite.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003eHigh Performance\u003c\/li\u003e\n\u003cli\u003eHigh Torque\u003c\/li\u003e\n\u003cli\u003eSuperior Rotor and Pad Wear\u003c\/li\u003e\n\u003cli\u003eExcellent Modulation and Release Characteristics\u003c\/li\u003e\n\u003cli\u003eApplicable to NASCAR, NASCAR modified, ARCA, Super Late models, pavement circle track, Pro 2, Pro 4 Off Road Trucks, Pro Lite, Sports Car, GT, GS, Open Wheel, Formula, Monster Trucks\u003c\/li\u003e\n\u003cli\u003eStable Friction Output\u003c\/li\u003e\n\u003cli\u003e400-1600 Deg F Operating Temperature Range\u003c\/li\u003e\n\u003cli\u003e600-1200 Deg F Optimal Temperature Range\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eFor motorsport use only. Image is for illustative purposes, actual product may differ.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003ch3\u003eHawk Brake Pad Installation Procedure\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eInstall Brake pads properly. Be sure pads are securely positioned in the caliper.\u003c\/li\u003e\n\u003cli\u003eFlush system with fresh brake fluid.\u003c\/li\u003e\n\u003cli\u003eCheck all hydraulic parts for excess wear and tear.\u003c\/li\u003e\n\u003cli\u003eCheck disc for proper thickness, parallelism, and lateral run-out.\u003c\/li\u003e\n\u003cli\u003eCheck disc for scoring or grooves over .012\"\" depth. If either applies, resurfacing or replacement is required.\u003c\/li\u003e\n\u003cli\u003eIf disc does not need resurfacing then contamination from the previous brake pads must be removed. Sand discs with Garnet sandpaper using moderate pressure. Use soap and water to clean off disc surface after sanding and machining. Discs should be free and clear of oil, grease, and brake fluid\u003c\/li\u003e\n\u003cli\u003eInspect calipers for freedom of movement. Lubricate where necessary\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eHawk Brake Pad Bedding Procedure - Motorsports Pads\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAfter reaching medium speed engage brake pedal to slow car without coming to a complete stop. Release pedal quickly and do not drag brakes. Repeat four or five times.\u003c\/li\u003e\n\u003cli\u003eAt higher speeds engage brake pedal to slow car without coming to a complete stop. Release pedal quickly and do not drag brakes. Repeat five times.\u003c\/li\u003e\n\u003cli\u003eAt or near race speed engage brake pedal to slow car without coming to a complete stop. Release pedal quickly and do not drag brakes. Repeat three times. Allow a few seconds between brake engagements while car is in motion.\u003c\/li\u003e\n\u003cli\u003eDo not hold brake pedal. Park car for approximately 20 minutes or until brake rotors are completely cool to the touch.\u003c\/li\u003e\n\u003cli\u003eIf during the above steps the brake pedal becomes soft or brake fade is noticed, park the car immediately for approximately 20 minutes. Do not hold brake pedal.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eImportant Reminders when Burnishing or Bedding Brake Pads\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eDo not attempt to use badly worn or damaged rotors with new brake pads.\u003c\/li\u003e\n\u003cli\u003eDo not drag brakes while car is moving during break-in procedure.\u003c\/li\u003e\n\u003cli\u003eDo not engage pedal while car is stopped at any time following the break-in procedure.\u003c\/li\u003e\n\u003cli\u003eUpon completing the procedure, allow the brake system to completely cool before racing.\u003c\/li\u003e\n\u003cli\u003eApplying the pedal a few times before the start of the race will allow the brake pads to heat up before attempting to reach race speeds.\u003c\/li\u003e\nli\u0026gt;Clean a used rotor surface with fine sand paper or steel wool, rinse with water, dry and install before bedding new pads\n\u003cli\u003eSome forms of racing do not allow time for the proper break-in procedure to be performed. However, it is still very important to attempt to perform at least the core of the procedure: Build up heat slowly and allow the system to completely cool down before racing if possible.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"HAWK Performance","offers":[{"title":"Default Title","offer_id":48978907595048,"sku":"HWK-HB453U.585","price":430.84,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/5767\/7352\/files\/hawk-performance-dtc-70-motorsports-brake-pads-front-megane-rs-gen3-4-1-8-2-0l-08-present-855.webp?v=1721902351"},{"product_id":"hawk-performance-dtc-50-motorsports-brake-pads-front-megane-rs-gen3-4-1-8-2-0l-08-present","title":"HAWK Performance DTC-50 Motorsports Brake Pads Front Megane RS (Gen3\/4) 1.8-2.0L 08-Present","description":"\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cp\u003eThe Hawk DTC-50 compound is what racers have been asking for: a pad that can be used as a split compound for tuning, and an endurance compound that can be used at the highest levels of racing. DTC-50 was developed through extensive testing, giving racers a pad that enhances our line of Dynamic Torque Control products and bridges the temperature and brake torque range between our current DTC-30 to DTC-60 race pads. This new compound offers consistent performance across a wide range of temperatures, while providing very high torque and aggressive initial bite.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003eVery High Torque\u003c\/li\u003e\n\u003cli\u003eAggressive Initial Bite\u003c\/li\u003e\n\u003cli\u003eExcellent Modulation and Release Characteristics\u003c\/li\u003e\n\u003cli\u003eHigh Temperature Fade Resistance\u003c\/li\u003e\n\u003cli\u003eDesigned for High Deceleration Rates\u003c\/li\u003e\n\u003cli\u003e500-1100 Deg F Operating Temperature Range\u003c\/li\u003e\n\u003cli\u003e500-1100 Deg F Optimal Temperature Range\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eFor motorsport use only. Image is for illustative purposes, actual product may differ.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003ch3\u003eHawk Brake Pad Installation Procedure\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eInstall Brake pads properly. Be sure pads are securely positioned in the caliper.\u003c\/li\u003e\n\u003cli\u003eFlush system with fresh brake fluid.\u003c\/li\u003e\n\u003cli\u003eCheck all hydraulic parts for excess wear and tear.\u003c\/li\u003e\n\u003cli\u003eCheck disc for proper thickness, parallelism, and lateral run-out.\u003c\/li\u003e\n\u003cli\u003eCheck disc for scoring or grooves over .012\"\" depth. If either applies, resurfacing or replacement is required.\u003c\/li\u003e\n\u003cli\u003eIf disc does not need resurfacing then contamination from the previous brake pads must be removed. Sand discs with Garnet sandpaper using moderate pressure. Use soap and water to clean off disc surface after sanding and machining. Discs should be free and clear of oil, grease, and brake fluid\u003c\/li\u003e\n\u003cli\u003eInspect calipers for freedom of movement. Lubricate where necessary\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eHawk Brake Pad Bedding Procedure - Motorsports Pads\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAfter reaching medium speed engage brake pedal to slow car without coming to a complete stop. Release pedal quickly and do not drag brakes. Repeat four or five times.\u003c\/li\u003e\n\u003cli\u003eAt higher speeds engage brake pedal to slow car without coming to a complete stop. Release pedal quickly and do not drag brakes. Repeat five times.\u003c\/li\u003e\n\u003cli\u003eAt or near race speed engage brake pedal to slow car without coming to a complete stop. Release pedal quickly and do not drag brakes. Repeat three times. Allow a few seconds between brake engagements while car is in motion.\u003c\/li\u003e\n\u003cli\u003eDo not hold brake pedal. Park car for approximately 20 minutes or until brake rotors are completely cool to the touch.\u003c\/li\u003e\n\u003cli\u003eIf during the above steps the brake pedal becomes soft or brake fade is noticed, park the car immediately for approximately 20 minutes. Do not hold brake pedal.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eImportant Reminders when Burnishing or Bedding Brake Pads\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eDo not attempt to use badly worn or damaged rotors with new brake pads.\u003c\/li\u003e\n\u003cli\u003eDo not drag brakes while car is moving during break-in procedure.\u003c\/li\u003e\n\u003cli\u003eDo not engage pedal while car is stopped at any time following the break-in procedure.\u003c\/li\u003e\n\u003cli\u003eUpon completing the procedure, allow the brake system to completely cool before racing.\u003c\/li\u003e\n\u003cli\u003eApplying the pedal a few times before the start of the race will allow the brake pads to heat up before attempting to reach race speeds.\u003c\/li\u003e\nli\u0026gt;Clean a used rotor surface with fine sand paper or steel wool, rinse with water, dry and install before bedding new pads\n\u003cli\u003eSome forms of racing do not allow time for the proper break-in procedure to be performed. However, it is still very important to attempt to perform at least the core of the procedure: Build up heat slowly and allow the system to completely cool down before racing if possible.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eLimited Lifetime Warranty\u003c\/h3\u003e\n\u003cp\u003eCarlisle Brake \u0026amp; Friction (CBF) warrants Hawk Performance branded products to be free of defects from workmanship and materials. This warranty does not apply to normal wear or damage caused by negligence, lack of maintenance, accident, abnormal operations, or improper installation or service. CBF does not make any other warranty claims, either expressed or implied, including the implied warranties of merchantability or fitness for a particular purpose. In no event will CBF\/Hawk Performance be liable for incidental or consequential damages of any kind, whether such damages are claimed on account of breach of warranty, breach of contract, negligence, or strict product liability. This includes without limitation, damage to property, or other economic losses that may be incurred. Any, and all, warranty claims must be processed through CBF. All valid warranty claims will be replaced and\/or reimbursed with Hawk Performance branded products of equal or greater value.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e* Disclaimer to Limited Life-Time Warranty: Motorsports brake pads and rotors are developed for high performance events. Racing is a dangerous sport. Hawk Performance racing brake pads and rotors are sold without warranty expressed or implied. No warranty or representation is made as to this products ability to protect the user from injury or death. The user assumes that risk.\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/div\u003e","brand":"HAWK Performance","offers":[{"title":"Default Title","offer_id":48978907627816,"sku":"HWK-HB453V.585","price":300.55,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/5767\/7352\/files\/hawk-performance-dtc-50-motorsports-brake-pads-front-megane-rs-gen3-4-1-8-2-0l-08-present-427.webp?v=1721902359"},{"product_id":"hawk-performance-dtc-30-motorsports-brake-pads-front-megane-rs-gen3-4-1-8-2-0l-08-present","title":"HAWK Performance DTC-30 Motorsports Brake Pads Front Megane RS (Gen3\/4) 1.8-2.0L 08-Present","description":"\u003cdiv\u003e\n\u003cp\u003eDTC-30 is a controllable torque, multi-purpose compound, proven effective in a range of series. It delivers superior release characteristics and smooth pedal feel and initial bite for dirt and circle tracks, NASCAR modified, drag racing, trophy trucks, pro buggies, and more.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cp\u003eIn addition to the applications mentioned above, the DTC-30 compound is often used on the rear axle of smaller race vehicles. Competitive racers of the Miata or S2000 will often choose DTC-30 for the rear axle paired with DTC-60 on the front. DTC-30 will also find itself on both axles of street driven vehicles when braking performance is top priority and owner is willing to sacrifice cleanliness and lack of brake noise.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003eConsistent, Smooth Braking\u003c\/li\u003e\n\u003cli\u003eEffective when Cold\u003c\/li\u003e\n\u003cli\u003e100-1200 Deg F Operating Temperature Range\u003c\/li\u003e\n\u003cli\u003e100-800 Deg F Optimal Temperature Range\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eFor motorsport use only. Image is for illustative purposes, actual product may differ.\u003c\/p\u003e\n\u003ch3\u003eHawk Brake Pad Installation Procedure\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eInstall Brake pads properly. Be sure pads are securely positioned in the caliper.\u003c\/li\u003e\n\u003cli\u003eFlush system with fresh brake fluid.\u003c\/li\u003e\n\u003cli\u003eCheck all hydraulic parts for excess wear and tear.\u003c\/li\u003e\n\u003cli\u003eCheck disc for proper thickness, parallelism, and lateral run-out.\u003c\/li\u003e\n\u003cli\u003eCheck disc for scoring or grooves over .012\"\" depth. If either applies, resurfacing or replacement is required.\u003c\/li\u003e\n\u003cli\u003eIf disc does not need resurfacing then contamination from the previous brake pads must be removed. Sand discs with Garnet sandpaper using moderate pressure. Use soap and water to clean off disc surface after sanding and machining. Discs should be free and clear of oil, grease, and brake fluid\u003c\/li\u003e\n\u003cli\u003eInspect calipers for freedom of movement. Lubricate where necessary\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eHawk Brake Pad Bedding Procedure - Motorsports Pads\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAfter reaching medium speed engage brake pedal to slow car without coming to a complete stop. Release pedal quickly and do not drag brakes. Repeat four or five times.\u003c\/li\u003e\n\u003cli\u003eAt higher speeds engage brake pedal to slow car without coming to a complete stop. Release pedal quickly and do not drag brakes. Repeat five times.\u003c\/li\u003e\n\u003cli\u003eAt or near race speed engage brake pedal to slow car without coming to a complete stop. Release pedal quickly and do not drag brakes. Repeat three times. Allow a few seconds between brake engagements while car is in motion.\u003c\/li\u003e\n\u003cli\u003eDo not hold brake pedal. Park car for approximately 20 minutes or until brake rotors are completely cool to the touch.\u003c\/li\u003e\n\u003cli\u003eIf during the above steps the brake pedal becomes soft or brake fade is noticed, park the car immediately for approximately 20 minutes. Do not hold brake pedal.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eImportant Reminders when Burnishing or Bedding Brake Pads\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eDo not attempt to use badly worn or damaged rotors with new brake pads.\u003c\/li\u003e\n\u003cli\u003eDo not drag brakes while car is moving during break-in procedure.\u003c\/li\u003e\n\u003cli\u003eDo not engage pedal while car is stopped at any time following the break-in procedure.\u003c\/li\u003e\n\u003cli\u003eUpon completing the procedure, allow the brake system to completely cool before racing.\u003c\/li\u003e\n\u003cli\u003eApplying the pedal a few times before the start of the race will allow the brake pads to heat up before attempting to reach race speeds.\u003c\/li\u003e\nli\u0026gt;Clean a used rotor surface with fine sand paper or steel wool, rinse with water, dry and install before bedding new pads\n\u003cli\u003eSome forms of racing do not allow time for the proper break-in procedure to be performed. However, it is still very important to attempt to perform at least the core of the procedure: Build up heat slowly and allow the system to completely cool down before racing if possible.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eLimited Lifetime Warranty\u003c\/h3\u003e\n\u003cp\u003eCarlisle Brake \u0026amp; Friction (CBF) warrants Hawk Performance branded products to be free of defects from workmanship and materials. This warranty does not apply to normal wear or damage caused by negligence, lack of maintenance, accident, abnormal operations, or improper installation or service. CBF does not make any other warranty claims, either expressed or implied, including the implied warranties of merchantability or fitness for a particular purpose. In no event will CBF\/Hawk Performance be liable for incidental or consequential damages of any kind, whether such damages are claimed on account of breach of warranty, breach of contract, negligence, or strict product liability. This includes without limitation, damage to property, or other economic losses that may be incurred. Any, and all, warranty claims must be processed through CBF. All valid warranty claims will be replaced and\/or reimbursed with Hawk Performance branded products of equal or greater value.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e* Disclaimer to Limited Life-Time Warranty: Motorsports brake pads and rotors are developed for high performance events. Racing is a dangerous sport. Hawk Performance racing brake pads and rotors are sold without warranty expressed or implied. No warranty or representation is made as to this products ability to protect the user from injury or death. The user assumes that risk.\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/div\u003e","brand":"HAWK Performance","offers":[{"title":"Default Title","offer_id":48978907660584,"sku":"HWK-HB453W.585","price":303.68,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/5767\/7352\/files\/hawk-performance-dtc-30-motorsports-brake-pads-front-megane-rs-gen3-4-1-8-2-0l-08-present-530.webp?v=1721902355"},{"product_id":"hawk-performance-er-1-motorsports-brake-pads-front-renault-megane-rs-gen3-4-1-8-2-0l-08-present","title":"HAWK Performance ER-1 Motorsports Brake Pads Front Renault Megane RS (Gen3\/4) 1.8-2.0L 08-Present","description":"\u003cp\u003eER-1 has been developed by Hawk Performance for the endurance racing market with a simple goal; offer a higher coefficient of friction than competing endurance pads while maintaining matched or improved lifespan. Years of testing across America’s most prestigious races has resulted in a well-rounded compound that offers ideal modulation and pedal communication, with ground breaking friction stability across a thermal range as high as 1,600 °F. This consistency of performance, hour after hour, makes it ideal for not only endurance racing, but HPDE, track days, time trials and even sprint racing.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSuperior Pad \u0026amp; Rotor wear\u003c\/li\u003e\n\u003cli\u003eConsistent medium-to-high friction\u003c\/li\u003e\n\u003cli\u003eSpecific emphasis on modulation, release and pedal communication\u003c\/li\u003e\n\u003cli\u003eIdeal for light-to-medium weight vehicles in HPDE, Track Day events, Time Trials, or Endurance Racing\u003c\/li\u003e\n\u003cli\u003eHigher coefficient of friction than competing endurance pads, wtih matched or improved lifespan\u003c\/li\u003e\n\u003cli\u003eAll Hawk Performance compounds are not compatible with carbon ceramic rotors. Hawk pads are designed to work with Iron\/Metal rotors\u003c\/li\u003e\n\u003cli\u003eMedium to High torque\u003c\/li\u003e\n\u003cli\u003e400-1600 F operating temperatures\u003c\/li\u003e\n\u003cli\u003e700-1100 F optimal temperatures\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eImage is for illustative purposes, actual product may differ.\u003c\/p\u003e\n\u003ch3\u003eLimited Lifetime Warranty\u003c\/h3\u003e\n\u003cp\u003eCarlisle Brake \u0026amp; Friction (CBF) warrants Hawk Performance branded products to be free of defects from workmanship and materials. This warranty does not apply to normal wear or damage caused by negligence, lack of maintenance, accident, abnormal operations, or improper installation or service. CBF does not make any other warranty claims, either expressed or implied, including the implied warranties of merchantability or fitness for a particular purpose. In no event will CBF\/Hawk Performance be liable for incidental or consequential damages of any kind, whether such damages are claimed on account of breach of warranty, breach of contract, negligence, or strict product liability. This includes without limitation, damage to property, or other economic losses that may be incurred. Any, and all, warranty claims must be processed through CBF. All valid warranty claims will be replaced and\/or reimbursed with Hawk Performance branded products of equal or greater value.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e* Disclaimer to Limited Life-Time Warranty: Motorsports brake pads and rotors are developed for high performance events. Racing is a dangerous sport. Hawk Performance racing brake pads and rotors are sold without warranty expressed or implied. No warranty or representation is made as to this products ability to protect the user from injury or death. The user assumes that risk.\u003c\/strong\u003e\u003c\/p\u003e","brand":"HAWK Performance","offers":[{"title":"Default Title","offer_id":48978907693352,"sku":"HWK-HB453D.585","price":410.02,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/5767\/7352\/files\/hawk-performance-er-1-motorsports-brake-pads-front-renault-megane-rs-gen3-4-8-2-0l-08-present-350.webp?v=1721902363"},{"product_id":"hawk-performance-pc-performance-ceramic-street-brake-pads-rear-megane-rs-gen4-clio-rs-gen3-1-8-2-0l-05-16","title":"HAWK Performance PC Performance Ceramic Street Brake Pads Rear Megane RS (Gen4) Clio RS (Gen3) 1.8-2.0L 05-16","description":"\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cp\u003eHawk understands the needs of today's ceramic brake pad users and has specifically formulated our composite material to meet - and beat - the stringent low noise, ultra-low dust performance standards they have set. Engineered to reduce brake NVH (Noise, Vibration and Harshness),Hawk PC (Performance Ceramic) is a premium disc brake pad that delivers excellent performance mile after mile. Providing a linear friction profile that allows your vehicle's ABS system to operate most effectively, the unique compound has the advantage of never sacrificing power to achieve traditional ceramic pad attributes. With Hawk's PC, you can expect reduced brake pad wear, longer rotor life, and our quietest ride ever.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cp\u003eThe Hawk PC (Performance Ceramic) is a great compound when your top priority is to minimize brake dust. This compound is a very popular replacement for OEM Brembo packages supplied on performance vehicles such as Corvettes, Mustangs, Challengers, Chargers, Subaru STI, and many others. If you are not looking to have increased brake performance over the stock level and want to virtually eliminate brake dust, the Hawk Performance Ceramic is what you are looking for.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003eExtremely Quite\u003c\/li\u003e\n\u003cli\u003eUltra-low Dust\u003c\/li\u003e\n\u003cli\u003eImproved Stopping Power\u003c\/li\u003e\n\u003cli\u003eGentle on rotors\u003c\/li\u003e\n\u003cli\u003eStable Friction Output\u003c\/li\u003e\n\u003cli\u003e100-650 Deg F Operating Temperature Range\u003c\/li\u003e\n\u003cli\u003e100-450 Deg F Optimal Temperature Range\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cp\u003eImage is for illustative purposes, actual product may differ.\u003c\/p\u003e\n\u003ch3\u003eHawk Brake Pad Installation Procedure\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eInstall Brake pads properly. Be sure pads are securely positioned in the caliper.\u003c\/li\u003e\n\u003cli\u003eFlush system with fresh brake fluid.\u003c\/li\u003e\n\u003cli\u003eCheck all hydraulic parts for excess wear and tear.\u003c\/li\u003e\n\u003cli\u003eCheck disc for proper thickness, parallelism, and lateral run-out.\u003c\/li\u003e\n\u003cli\u003eCheck disc for scoring or grooves over .012\"\" depth. If either applies, resurfacing or replacement is required.\u003c\/li\u003e\n\u003cli\u003eIf disc does not need resurfacing then contamination from the previous brake pads must be removed. Sand discs with Garnet sandpaper using moderate pressure. Use soap and water to clean off disc surface after sanding and machining. Discs should be free and clear of oil, grease, and brake fluid\u003c\/li\u003e\n\u003cli\u003eInspect calipers for freedom of movement. Lubricate where necessary\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eHawk Brake Pad Bedding Procedure - Street Compounds\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMake 6-10 slow-downs from approximately 30-35 mph to 5 mph. applying moderate pressure. Do not come to a complete stop.\u003c\/li\u003e\n\u003cli\u003eMake an additional 2 to 3 harder stops from approximately 40-45 mph. to zero.\u003c\/li\u003e\n\u003cli\u003eDO NOT DRAG THE BRAKES! (after stopping - do not leave your foot on the brake pedal)\u003c\/li\u003e\n\u003cli\u003eAllow 15 minutes or more for the brake system to cool down.\u003c\/li\u003e\n\u003cli\u003eYour new Hawk pads are ready for use.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eLimited Lifetime Warranty\u003c\/h3\u003e\n\u003cp\u003eCarlisle Brake \u0026amp; Friction (CBF) warrants Hawk Performance branded products to be free of defects from workmanship and materials. This warranty does not apply to normal wear or damage caused by negligence, lack of maintenance, accident, abnormal operations, or improper installation or service. CBF does not make any other warranty claims, either expressed or implied, including the implied warranties of merchantability or fitness for a particular purpose. In no event will CBF\/Hawk Performance be liable for incidental or consequential damages of any kind, whether such damages are claimed on account of breach of warranty, breach of contract, negligence, or strict product liability. This includes without limitation, damage to property, or other economic losses that may be incurred. Any, and all, warranty claims must be processed through CBF. All valid warranty claims will be replaced and\/or reimbursed with Hawk Performance branded products of equal or greater value.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e* Disclaimer to Limited Life-Time Warranty: Motorsports brake pads and rotors are developed for high performance events. Racing is a dangerous sport. Hawk Performance racing brake pads and rotors are sold without warranty expressed or implied. No warranty or representation is made as to this products ability to protect the user from injury or death. The user assumes that risk.\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/div\u003e","brand":"HAWK Performance","offers":[{"title":"Default Title","offer_id":48978908021032,"sku":"HWK-HB364Z.587","price":124.47,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/5767\/7352\/files\/hawk-performance-pc-ceramic-street-brake-pads-rear-megane-rs-gen4-clio-gen3-1-8-2-0l-05-16-916.webp?v=1721902395"},{"product_id":"hawk-performance-hps-5-0-high-performance-street-brake-pads-rear-megane-rs-gen4-clio-rs-gen3-1-8-2-0l-05-16","title":"HAWK Performance HPS 5.0 High Performance Street Brake Pads Rear Megane RS (Gen4) Clio RS (Gen3) 1.8-2.0L 05-16","description":"\u003cp\u003eFor years, engine builders have been pushing motors to the limits of their ability, and at Hawk Performance, we're closer than ever to pushing the ABS Rev Limiter to its limits. The Hawk HPS 5.0 (High Performance Street 5.0) brake pad compound gives your vehicle the greatest possible stopping power and pedal feel without compromising ABS. HPS 5.0 is a Ferro-Carbon compound that provides advanced braking characteristics to enhance the driving experience. This compound combines the safety and quality of aerospace design with the braking technology of motorsports. The results are shorter stopping distances, improved performance under heavy braking conditions, and street car friendly characteristics.\u003c\/p\u003e\n\u003cp\u003eThe Hawk HPS 5.0 is a good choice if you are looking to increase your street performance to the maximum level possible without suffering the adverse side effects of noise and large amounts of brake dust commonly associated with higher performance pads. The HPS 5.0 will provide increased brake torque and operating temperature when compared to the Hawk HPS compound. The HPS 5.0 compound can withstand light track use as long as you are aware of the signs of over-heating and allow proper cool off time when the pads approach their upper temperature. The Hawk HPS 5.0 compound is not a race compound and it can not withstand prolonged race sessions at high temperatures. The HPS 5.0 Compound will be cleaner than most OEM Pads, but produce more brake dust than the Hawk Ceramic and Hawk HPS.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAggressive Torque\u003c\/li\u003e\n\u003cli\u003eGreat Rotor and Pad Wear\u003c\/li\u003e\n\u003cli\u003eSmooth, Predictable Control\u003c\/li\u003e\n\u003cli\u003eHigh Rates of Deceleration\u003c\/li\u003e\n\u003cli\u003eConsistent Release Characteristics\u003c\/li\u003e\n\u003cli\u003e100-750 Deg F Operating Temperature Range\u003c\/li\u003e\n\u003cli\u003e100-550 Deg F Optimal Temperature Range\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv\u003e\n\u003cp\u003eImage is for illustative purposes, actual product may differ.\u003c\/p\u003e\n\u003ch3\u003eHawk Brake Pad Installation Procedure\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eInstall Brake pads properly. Be sure pads are securely positioned in the caliper.\u003c\/li\u003e\n\u003cli\u003eFlush system with fresh brake fluid.\u003c\/li\u003e\n\u003cli\u003eCheck all hydraulic parts for excess wear and tear.\u003c\/li\u003e\n\u003cli\u003eCheck disc for proper thickness, parallelism, and lateral run-out.\u003c\/li\u003e\n\u003cli\u003eCheck disc for scoring or grooves over .012\"\" depth. If either applies, resurfacing or replacement is required.\u003c\/li\u003e\n\u003cli\u003eIf disc does not need resurfacing then contamination from the previous brake pads must be removed. Sand discs with Garnet sandpaper using moderate pressure. Use soap and water to clean off disc surface after sanding and machining. Discs should be free and clear of oil, grease, and brake fluid\u003c\/li\u003e\n\u003cli\u003eInspect calipers for freedom of movement. Lubricate where necessary\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eHawk Brake Pad Bedding Procedure - Street Compounds\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMake 6-10 slow-downs from approximately 30-35 mph to 5 mph. applying moderate pressure. Do not come to a complete stop.\u003c\/li\u003e\n\u003cli\u003eMake an additional 2 to 3 harder stops from approximately 40-45 mph. to zero.\u003c\/li\u003e\n\u003cli\u003eDO NOT DRAG THE BRAKES! (after stopping - do not leave your foot on the brake pedal)\u003c\/li\u003e\n\u003cli\u003eAllow 15 minutes or more for the brake system to cool down.\u003c\/li\u003e\n\u003cli\u003eYour new Hawk pads are ready for use.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eLimited Lifetime Warranty\u003c\/h3\u003e\n\u003cp\u003eCarlisle Brake \u0026amp; Friction (CBF) warrants Hawk Performance branded products to be free of defects from workmanship and materials. This warranty does not apply to normal wear or damage caused by negligence, lack of maintenance, accident, abnormal operations, or improper installation or service. CBF does not make any other warranty claims, either expressed or implied, including the implied warranties of merchantability or fitness for a particular purpose. In no event will CBF\/Hawk Performance be liable for incidental or consequential damages of any kind, whether such damages are claimed on account of breach of warranty, breach of contract, negligence, or strict product liability. This includes without limitation, damage to property, or other economic losses that may be incurred. Any, and all, warranty claims must be processed through CBF. All valid warranty claims will be replaced and\/or reimbursed with Hawk Performance branded products of equal or greater value.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e* Disclaimer to Limited Life-Time Warranty: Motorsports brake pads and rotors are developed for high performance events. Racing is a dangerous sport. Hawk Performance racing brake pads and rotors are sold without warranty expressed or implied. No warranty or representation is made as to this products ability to protect the user from injury or death. The user assumes that risk.\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/div\u003e","brand":"HAWK Performance","offers":[{"title":"Default Title","offer_id":48978908053800,"sku":"HWK-HB364B.587","price":147.82,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/5767\/7352\/files\/hawk-performance-hps-5-0-high-street-brake-pads-rear-megane-rs-gen4-clio-gen3-1-8-2-0l-05-16-827.webp?v=1721902381"},{"product_id":"hawk-performance-hp-plus-road-and-track-brake-pads-rear-megane-rs-gen4-clio-rs-gen3-1-8-2-0l-05-16","title":"HAWK Performance HP Plus Road and Track Brake Pads Rear Megane RS (Gen4) Clio RS (Gen3) 1.8-2.0L 05-16","description":"\u003cdiv\u003e\n\u003cp\u003eThe Hawk Performance HP Plus brake pad compound is ideal for Autocross and Track Day drivers looking for a high performance race compound that can take the heat of the track and get you home safely without having to change the pads. HP Plus utilizes a unique Ferro-Carbon, High-Tech friction material that was developed and manufactured for sport driving in autocross, Solo II, and track day applications. The Ferro-Carbon formulation offers lower wear rates and higher torque values than other competitive materials.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cp\u003eHP Plus is popular with enthusiasts that are looking for excellent street performance or wanting take their car auto-crossing or to a track day and not have to worry about changing pads. The HP Plus will provide a very noticeable increase in brake torque and temperature range when compared to OEM pads. Usually recommended to beginners who have very little to no track experience and are looking for an upgrade over stock.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003eLow to Mid Temperature Range\u003c\/li\u003e\n\u003cli\u003eFade Resistant\u003c\/li\u003e\n\u003cli\u003eSmooth, Predictable Torque\u003c\/li\u003e\n\u003cli\u003eIdeal for Autocross\u003c\/li\u003e\n\u003cli\u003e100-800 Deg F Operating Temperature Range\u003c\/li\u003e\n\u003cli\u003e300-600 Deg F Optimal Temperature Range\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eImage is for illustative purposes, actual product may differ.\u003c\/p\u003e\n\u003ch3\u003eHawk Brake Pad Installation Procedure\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eInstall Brake pads properly. Be sure pads are securely positioned in the caliper.\u003c\/li\u003e\n\u003cli\u003eFlush system with fresh brake fluid.\u003c\/li\u003e\n\u003cli\u003eCheck all hydraulic parts for excess wear and tear.\u003c\/li\u003e\n\u003cli\u003eCheck disc for proper thickness, parallelism, and lateral run-out.\u003c\/li\u003e\n\u003cli\u003eCheck disc for scoring or grooves over .012\"\" depth. If either applies, resurfacing or replacement is required.\u003c\/li\u003e\n\u003cli\u003eIf disc does not need resurfacing then contamination from the previous brake pads must be removed. Sand discs with Garnet sandpaper using moderate pressure. Use soap and water to clean off disc surface after sanding and machining. Discs should be free and clear of oil, grease, and brake fluid\u003c\/li\u003e\n\u003cli\u003eInspect calipers for freedom of movement. Lubricate where necessary\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eHawk Brake Pad Bedding Procedure - Street Compounds\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMake 6-10 slow-downs from approximately 30-35 mph to 5 mph. applying moderate pressure. Do not come to a complete stop.\u003c\/li\u003e\n\u003cli\u003eMake an additional 2 to 3 harder stops from approximately 40-45 mph. to zero.\u003c\/li\u003e\n\u003cli\u003eDO NOT DRAG THE BRAKES! (after stopping - do not leave your foot on the brake pedal)\u003c\/li\u003e\n\u003cli\u003eAllow 15 minutes or more for the brake system to cool down.\u003c\/li\u003e\n\u003cli\u003eYour new Hawk pads are ready for use.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eLimited Lifetime Warranty\u003c\/h3\u003e\n\u003cp\u003eCarlisle Brake \u0026amp; Friction (CBF) warrants Hawk Performance branded products to be free of defects from workmanship and materials. This warranty does not apply to normal wear or damage caused by negligence, lack of maintenance, accident, abnormal operations, or improper installation or service. CBF does not make any other warranty claims, either expressed or implied, including the implied warranties of merchantability or fitness for a particular purpose. In no event will CBF\/Hawk Performance be liable for incidental or consequential damages of any kind, whether such damages are claimed on account of breach of warranty, breach of contract, negligence, or strict product liability. This includes without limitation, damage to property, or other economic losses that may be incurred. Any, and all, warranty claims must be processed through CBF. All valid warranty claims will be replaced and\/or reimbursed with Hawk Performance branded products of equal or greater value.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e* Disclaimer to Limited Life-Time Warranty: Motorsports brake pads and rotors are developed for high performance events. Racing is a dangerous sport. Hawk Performance racing brake pads and rotors are sold without warranty expressed or implied. No warranty or representation is made as to this products ability to protect the user from injury or death. The user assumes that risk.\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/div\u003e","brand":"HAWK Performance","offers":[{"title":"Default Title","offer_id":48978908119336,"sku":"HWK-HB364N.587","price":169.2,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/5767\/7352\/files\/hawk-performance-hp-plus-road-and-track-brake-pads-rear-megane-rs-gen4-clio-gen3-1-8-2-0l-05-16-585.webp?v=1721902399"},{"product_id":"hawk-performance-hps-high-performance-street-brake-pads-rear-megane-rs-gen4-clio-rs-gen3-1-8-2-0l-05-16","title":"HAWK Performance HPS High Performance Street Brake Pads Rear Megane RS (Gen4) Clio RS (Gen3) 1.8-2.0L 05-16","description":"\u003cdiv\u003e\n\u003cp\u003eHawk HPS (High Performance Street) brake pads are world renowned for increasing stopping power on your street driven vehicle. Increasing the performance of your vehicles braking system is easy when you choose Hawk Performance's HPS braking compound. This unique Ferro-Carbon formula was developed for street performance using the safety and quality of Aerospace and Motorsports severe-duty friction technology. The High Performance Street compound offers a higher coefficient of friction over stock brake pads and can provide you 20-40% more stopping power and higher resistance to brake fade than most standard replacement pads. Less fade means you'll have a highly durable brake pad with less brake dust.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cp\u003eThe Hawk HPS compound, in most cases, will provide increased brake torque and operating temperature when compared to OEM pads. There will also be a decrease in brake dust. With an upper end operating temperature of 800-900 Deg F, the HPS compound can withstand light track use as long as you are aware of the signs of over-heating and allow proper cool off time when the pads approach their upper temperature. The Hawk HPS compound is not a race compound and it can not withstand prolonged race sessions at high temperatures. Concerning brake dust, the HPS will be cleaner than your OEM Pads, but create more dust than the Hawk Ceramic compound. The performance improvement over Hawk Ceramic comes at the cost of increased dust production.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003eSmooth braking Feel\u003c\/li\u003e\n\u003cli\u003eExcellent for Spirited Driving\u003c\/li\u003e\n\u003cli\u003eGentle on Pads and Rotors\u003c\/li\u003e\n\u003cli\u003eConsistent Release Characteristics\u003c\/li\u003e\n\u003cli\u003eIncreased Stopping Power\u003c\/li\u003e\n\u003cli\u003e100-700 Deg F Operating Temperature Range\u003c\/li\u003e\n\u003cli\u003e100-500 Deg F Optimal Temperature Range\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eImage is for illustative purposes, actual product may differ.\u003c\/p\u003e\n\u003ch3\u003eHawk Brake Pad Installation Procedure\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eInstall Brake pads properly. Be sure pads are securely positioned in the caliper.\u003c\/li\u003e\n\u003cli\u003eFlush system with fresh brake fluid.\u003c\/li\u003e\n\u003cli\u003eCheck all hydraulic parts for excess wear and tear.\u003c\/li\u003e\n\u003cli\u003eCheck disc for proper thickness, parallelism, and lateral run-out.\u003c\/li\u003e\n\u003cli\u003eCheck disc for scoring or grooves over .012\"\" depth. If either applies, resurfacing or replacement is required.\u003c\/li\u003e\n\u003cli\u003eIf disc does not need resurfacing then contamination from the previous brake pads must be removed. Sand discs with Garnet sandpaper using moderate pressure. Use soap and water to clean off disc surface after sanding and machining. Discs should be free and clear of oil, grease, and brake fluid\u003c\/li\u003e\n\u003cli\u003eInspect calipers for freedom of movement. Lubricate where necessary\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eHawk Brake Pad Bedding Procedure - Street Compounds\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMake 6-10 slow-downs from approximately 30-35 mph to 5 mph. applying moderate pressure. Do not come to a complete stop.\u003c\/li\u003e\n\u003cli\u003eMake an additional 2 to 3 harder stops from approximately 40-45 mph. to zero.\u003c\/li\u003e\n\u003cli\u003eDO NOT DRAG THE BRAKES! (after stopping - do not leave your foot on the brake pedal)\u003c\/li\u003e\n\u003cli\u003eAllow 15 minutes or more for the brake system to cool down.\u003c\/li\u003e\n\u003cli\u003eYour new Hawk pads are ready for use.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eLimited Lifetime Warranty\u003c\/h3\u003e\n\u003cp\u003eCarlisle Brake \u0026amp; Friction (CBF) warrants Hawk Performance branded products to be free of defects from workmanship and materials. This warranty does not apply to normal wear or damage caused by negligence, lack of maintenance, accident, abnormal operations, or improper installation or service. CBF does not make any other warranty claims, either expressed or implied, including the implied warranties of merchantability or fitness for a particular purpose. In no event will CBF\/Hawk Performance be liable for incidental or consequential damages of any kind, whether such damages are claimed on account of breach of warranty, breach of contract, negligence, or strict product liability. This includes without limitation, damage to property, or other economic losses that may be incurred. Any, and all, warranty claims must be processed through CBF. All valid warranty claims will be replaced and\/or reimbursed with Hawk Performance branded products of equal or greater value.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e* Disclaimer to Limited Life-Time Warranty: Motorsports brake pads and rotors are developed for high performance events. Racing is a dangerous sport. Hawk Performance racing brake pads and rotors are sold without warranty expressed or implied. No warranty or representation is made as to this products ability to protect the user from injury or death. The user assumes that risk.\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/div\u003e","brand":"HAWK Performance","offers":[{"title":"Default Title","offer_id":48978908152104,"sku":"HWK-HB364F.587","price":141.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/5767\/7352\/files\/hawk-performance-hps-high-street-brake-pads-rear-megane-rs-gen4-clio-gen3-1-8-2-0l-05-16-256.webp?v=1721902410"},{"product_id":"hawk-performance-blue-9012-motorsports-brake-pads-rear-megane-rs-gen4-clio-rs-gen3-1-8-2-0l-05-16","title":"HAWK Performance Blue 9012 Motorsports Brake Pads Rear Megane RS (Gen4) Clio RS (Gen3) 1.8-2.0L 05-16","description":"\u003cdiv\u003e\n\u003cp\u003eDesigned as an entry level endurance compound, there's nothing second-string about Hawk's Blue 9012 race compound. Easier to bed in and delivering excellent pad and rotor life, Blue 9012 is a medium torque pad developed specifically for Road, Rally and Circle Track racing.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003eEndurance Compound\u003c\/li\u003e\n\u003cli\u003eMedium Friction\u003c\/li\u003e\n\u003cli\u003eIntermediate Initial Bite\u003c\/li\u003e\n\u003cli\u003eIncreased Mid-Mu Characteristics\u003c\/li\u003e\n\u003cli\u003e250-1000 Deg F Operating Temperature Range\u003c\/li\u003e\n\u003cli\u003e350-800 Deg F Optimal Temperature Range\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003ch3\u003eHawk Brake Pad Installation Procedure\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eInstall Brake pads properly. Be sure pads are securely positioned in the caliper.\u003c\/li\u003e\n\u003cli\u003eFlush system with fresh brake fluid.\u003c\/li\u003e\n\u003cli\u003eCheck all hydraulic parts for excess wear and tear.\u003c\/li\u003e\n\u003cli\u003eCheck disc for proper thickness, parallelism, and lateral run-out.\u003c\/li\u003e\n\u003cli\u003eCheck disc for scoring or grooves over .012\"\" depth. If either applies, resurfacing or replacement is required.\u003c\/li\u003e\n\u003cli\u003eIf disc does not need resurfacing then contamination from the previous brake pads must be removed. Sand discs with Garnet sandpaper using moderate pressure. Use soap and water to clean off disc surface after sanding and machining. Discs should be free and clear of oil, grease, and brake fluid\u003c\/li\u003e\n\u003cli\u003eInspect calipers for freedom of movement. Lubricate where necessary\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eHawk Brake Pad Bedding Procedure - Motorsports Pads\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAfter reaching medium speed engage brake pedal to slow car without coming to a complete stop. Release pedal quickly and do not drag brakes. Repeat four or five times.\u003c\/li\u003e\n\u003cli\u003eAt higher speeds engage brake pedal to slow car without coming to a complete stop. Release pedal quickly and do not drag brakes. Repeat five times.\u003c\/li\u003e\n\u003cli\u003eAt or near race speed engage brake pedal to slow car without coming to a complete stop. Release pedal quickly and do not drag brakes. Repeat three times. Allow a few seconds between brake engagements while car is in motion.\u003c\/li\u003e\n\u003cli\u003eDo not hold brake pedal. Park car for approximately 20 minutes or until brake rotors are completely cool to the touch.\u003c\/li\u003e\n\u003cli\u003eIf during the above steps the brake pedal becomes soft or brake fade is noticed, park the car immediately for approximately 20 minutes. Do not hold brake pedal.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eImportant Reminders when Burnishing or Bedding Brake Pads\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eDo not attempt to use badly worn or damaged rotors with new brake pads.\u003c\/li\u003e\n\u003cli\u003eDo not drag brakes while car is moving during break-in procedure.\u003c\/li\u003e\n\u003cli\u003eDo not engage pedal while car is stopped at any time following the break-in procedure.\u003c\/li\u003e\n\u003cli\u003eUpon completing the procedure, allow the brake system to completely cool before racing.\u003c\/li\u003e\n\u003cli\u003eApplying the pedal a few times before the start of the race will allow the brake pads to heat up before attempting to reach race speeds.\u003c\/li\u003e\n\u003cli\u003eClean a used rotor surface with fine sand paper or steel wool, rinse with water, dry and install before bedding new pads.\u003c\/li\u003e\n\u003cli\u003eSome forms of racing do not allow time for the proper break-in procedure to be performed. However, it is still very important to attempt to perform at least the core of the procedure: Build up heat slowly and allow the system to completely cool down before racing if possible.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eLimited Lifetime Warranty\u003c\/h3\u003e\n\u003cp\u003eCarlisle Brake \u0026amp; Friction (CBF) warrants Hawk Performance branded products to be free of defects from workmanship and materials. This warranty does not apply to normal wear or damage caused by negligence, lack of maintenance, accident, abnormal operations, or improper installation or service. CBF does not make any other warranty claims, either expressed or implied, including the implied warranties of merchantability or fitness for a particular purpose. In no event will CBF\/Hawk Performance be liable for incidental or consequential damages of any kind, whether such damages are claimed on account of breach of warranty, breach of contract, negligence, or strict product liability. This includes without limitation, damage to property, or other economic losses that may be incurred. Any, and all, warranty claims must be processed through CBF. All valid warranty claims will be replaced and\/or reimbursed with Hawk Performance branded products of equal or greater value.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e* Disclaimer to Limited Life-Time Warranty: Motorsports brake pads and rotors are developed for high performance events. Racing is a dangerous sport. Hawk Performance racing brake pads and rotors are sold without warranty expressed or implied. No warranty or representation is made as to this products ability to protect the user from injury or death. The user assumes that risk.\u003c\/strong\u003e\u003c\/p\u003e","brand":"HAWK Performance","offers":[{"title":"Default Title","offer_id":48978908479784,"sku":"HWK-HB364E.587","price":193.1,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/5767\/7352\/files\/hawk-performance-blue-9012-motorsports-brake-pads-rear-megane-rs-gen4-clio-gen3-1-8-2-0l-05-16-748.webp?v=1721902403"},{"product_id":"hawk-performance-er-1-motorsports-brake-pads-rear-renault-megane-rs-gen4-clio-rs-gen3-1-8-2-0l-05-16","title":"HAWK Performance ER-1 Motorsports Brake Pads Rear Renault Megane RS (Gen4) Clio RS (Gen3) 1.8-2.0L 05-16","description":"\u003cp\u003eER-1 has been developed by Hawk Performance for the endurance racing market with a simple goal; offer a higher coefficient of friction than competing endurance pads while maintaining matched or improved lifespan. Years of testing across America’s most prestigious races has resulted in a well-rounded compound that offers ideal modulation and pedal communication, with ground breaking friction stability across a thermal range as high as 1,600 °F. This consistency of performance, hour after hour, makes it ideal for not only endurance racing, but HPDE, track days, time trials and even sprint racing.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSuperior Pad \u0026amp; Rotor wear\u003c\/li\u003e\n\u003cli\u003eConsistent medium-to-high friction\u003c\/li\u003e\n\u003cli\u003eSpecific emphasis on modulation, release and pedal communication\u003c\/li\u003e\n\u003cli\u003eIdeal for light-to-medium weight vehicles in HPDE, Track Day events, Time Trials, or Endurance Racing\u003c\/li\u003e\n\u003cli\u003eHigher coefficient of friction than competing endurance pads, wtih matched or improved lifespan\u003c\/li\u003e\n\u003cli\u003eAll Hawk Performance compounds are not compatible with carbon ceramic rotors. Hawk pads are designed to work with Iron\/Metal rotors\u003c\/li\u003e\n\u003cli\u003eMedium to High torque\u003c\/li\u003e\n\u003cli\u003e400-1600 F operating temperatures\u003c\/li\u003e\n\u003cli\u003e700-1100 F optimal temperatures\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eImage is for illustative purposes, actual product may differ.\u003c\/p\u003e\n\u003ch3\u003eLimited Lifetime Warranty\u003c\/h3\u003e\n\u003cp\u003eCarlisle Brake \u0026amp; Friction (CBF) warrants Hawk Performance branded products to be free of defects from workmanship and materials. This warranty does not apply to normal wear or damage caused by negligence, lack of maintenance, accident, abnormal operations, or improper installation or service. CBF does not make any other warranty claims, either expressed or implied, including the implied warranties of merchantability or fitness for a particular purpose. In no event will CBF\/Hawk Performance be liable for incidental or consequential damages of any kind, whether such damages are claimed on account of breach of warranty, breach of contract, negligence, or strict product liability. This includes without limitation, damage to property, or other economic losses that may be incurred. Any, and all, warranty claims must be processed through CBF. All valid warranty claims will be replaced and\/or reimbursed with Hawk Performance branded products of equal or greater value.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e* Disclaimer to Limited Life-Time Warranty: Motorsports brake pads and rotors are developed for high performance events. Racing is a dangerous sport. Hawk Performance racing brake pads and rotors are sold without warranty expressed or implied. No warranty or representation is made as to this products ability to protect the user from injury or death. The user assumes that risk.\u003c\/strong\u003e\u003c\/p\u003e","brand":"HAWK Performance","offers":[{"title":"Default Title","offer_id":48978908676392,"sku":"HWK-HB364D.587","price":406.74,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/5767\/7352\/files\/hawk-performance-er-1-motorsports-brake-pads-rear-renault-megane-rs-gen4-clio-gen3-8-2-0l-05-16-583.webp?v=1721902700"},{"product_id":"forge-motorsport-boost-hoses-renault-megane-rs-280-300-16-21","title":"Forge Motorsport Boost Hoses Renault Megane RS 280 300 16-21","description":"\u003cp\u003e\u003cspan style=\"color:#000000;\"\u003eForge designed these silicone hoses so they can withstand pressures that can be experienced on tuned and remapped engines. They will long outlast the original hoses and with our limited lifetime warranty on all Forge products; you can be sure these hoses won't let you down.\u003c\/span\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003cspan style=\"color:#000000;\"\u003eThis boost hose kit includes four Fluorosilicone lined hoses, two CNC machined billet couplers, and all the hose clamps required. \u003c\/span\u003e\u003cspan style=\"color:#000000;\"\u003e\u003c\/span\u003e\u003cspan style=\"color:#000000;\"\u003e\u003c\/span\u003e\u003c\/p\u003e\n\n\u003cdiv class=\"pure-g pure-g-gapped\"\u003e\n\u003cdiv class=\"pure-u-1 pure-u-sm-1-2 pure-u-md-1-4\"\u003e\n\u003cp\u003e\u003cimg alt=\"\" src=\"https:\/\/www.forgemotorsport.co.uk\/userfiles\/images\/sys\/products\/Renault_Megane_MK4_280300_Boost_Hoses_76691jpeg.jpg\"\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"pure-u-1 pure-u-sm-1-2 pure-u-md-1-4\"\u003e\n\u003cp\u003e\u003cimg alt=\"\" src=\"https:\/\/www.forgemotorsport.co.uk\/userfiles\/images\/sys\/products\/Renault_Megane_MK4_280300_Boost_Hoses_29187jpeg.jpg\"\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"pure-u-1 pure-u-sm-1-2 pure-u-md-1-4\"\u003e\n\u003cp\u003e\u003cimg alt=\"\" src=\"https:\/\/www.forgemotorsport.co.uk\/userfiles\/images\/sys\/products\/Renault_Megane_MK4_280300_Boost_Hoses_73234jpeg.jpg\"\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"pure-u-1 pure-u-sm-1-2 pure-u-md-1-4\"\u003e\n\u003cp\u003e\u003cimg alt=\"\" src=\"https:\/\/www.forgemotorsport.co.uk\/userfiles\/images\/sys\/products\/Renault_Megane_MK4_280300_Boost_Hoses_63440jpeg.jpg\"\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003cp\u003e\u003cspan style=\"color:#000000;\"\u003eTo replace the following OEM parts:\u003c\/span\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003e\u003cstrong\u003e\u003cspan style=\"color:#000000;\"\u003e144605812R\u003c\/span\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\t\u003cli\u003e\u003cstrong\u003e\u003cspan style=\"color:#000000;\"\u003e144632831R\u003c\/span\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\t\u003cli\u003e\u003cstrong\u003e\u003cspan style=\"color:#000000;\"\u003e144636922R\u003c\/span\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003e\u003cimg alt=\"\" class=\"center-block\" src=\"\/userfiles\/IMG_0405%202.jpg\"\u003e\u003c\/p\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003e\u003cspan style=\"color:#000000;\"\u003e\u003cstrong\u003eHighlights:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003e\u003cspan style=\"color:#000000;\"\u003eAvailable in four colour options; red, blue, black, or yellow\u003c\/span\u003e\u003c\/li\u003e\n\t\u003cli\u003e\n\u003cspan style=\"color:#000000;\"\u003eHose included in the kit has a quality inner lining of modified silicone known as 'Fluorosilicone'. This means that the hose will stay bright and vibrant, and will not deteriorate over time.\u003c\/span\u003e \u003cspan style=\"color:#000000;\"\u003eForge Motorsport fluorosilicone lined hoses are suitable to be used with modern long-life coolants, Organic Acid Technology coolants (O.A.T.) and oil mist.\u003c\/span\u003e \u003cspan style=\"color:#000000;\"\u003eThe construction of the hose has been engineered to exceed that of the OEM fitments, the Forge Motorsport hose will enhance any engine bay both technically and aesthetically.\u003c\/span\u003e\n\u003c\/li\u003e\n\t\u003cli\u003e\u003cspan style=\"color:#000000;\"\u003eLifetime warranty*\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e*T\u0026amp;C’s apply\u003c\/p\u003e\n\n\u003cp\u003eIf you are unsure if this product is suitable for your application, please \u003ca href=\"https:\/\/www.forgemotorsport.co.uk\/Contact.html\" target=\"_blank\"\u003econtact us\u003c\/a\u003e. \u003c\/p\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003e\u003cimg alt=\"\" class=\"center-block\" src=\"\/userfiles\/Install%20Levels\/5.jpg\"\u003e\u003cbr\u003e\n\u003cscript async src=\"\/\/cdn.thinglink.me\/jse\/responsive.js\"\u003e\u003c\/script\u003e\u003c\/p\u003e","brand":"Forge Motorsport","offers":[{"title":"Black","offer_id":49209163645224,"sku":"FMKT027-BLA","price":288.72,"currency_code":"GBP","in_stock":true},{"title":"Blue","offer_id":49209163776296,"sku":"FMKT027-BLU","price":288.72,"currency_code":"GBP","in_stock":true},{"title":"Red","offer_id":49209163874600,"sku":"FMKT027-RED","price":288.72,"currency_code":"GBP","in_stock":true},{"title":"Yellow","offer_id":49209164005672,"sku":"FMKT027-YEL","price":288.72,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/5767\/7352\/files\/forge-motorsport-boost-hoses-renault-megane-rs-280-300-16-21-black-intake-pipes-775.webp?v=1725957799"},{"product_id":"forge-motorsport-blow-off-valve-renault-megane-rs-280-300-mk4-17-present","title":"Forge Motorsport Blow Off Valve Renault Megane RS 280 300 Mk4 17-Present","description":"\u003cp style=\"text-align: center;\"\u003e\u003cstrong\u003eWe recommend \u003ca href=\"https:\/\/eur02.safelinks.protection.outlook.com\/?url=https%3A%2F%2Fwww.forgemotorsport.co.uk%2FForge_Motorsport_Valve_Service_Kit--product--792.html\u0026amp;data=04%7C01%7CRyan.Maycroft%40forgemotorsport.co.uk%7C9c527b77984b421fd86f08d9e1783ae2%7C00abb41a5cc64513a26ba55e77093699%7C0%7C0%7C637788728786603849%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000\u0026amp;sdata=8p3zqmZThRr506CQrPiETtkslneZ4wQqshiIZHabfjo%3D\u0026amp;reserved=0\"\u003eservicing\u003c\/a\u003e your valve every 3 years, or 20,000 miles, whichever comes sooner\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis Blow Off, or dump valve, is for the Renault and Nissan Turbo engines that have the electronically controlled bypass valve (OEM Part no. 144839204R). It is recommended for any vehicle where the boost pressure has been increased by an ECU software upgrade and for unmodified vehicles operating in warmer climates, as a solution to the many failures that have occurred. Unfortunately, the failure doesn’t always result in a check engine light as the valve can still be blown open by the boost pressure, so you may not be aware that you are losing power due to this. This prevents the diaphragm from sealing.\u003c\/p\u003e\n\n\u003cp\u003eOur alternative is a fully engineered solution offering both significantly improved reliability. The Forge valve is piston based, there is no diaphragm to fail, and of all aluminium billet construction, it replaces the original unit with a pressure\/vacuum operated piston valve that still also retains the desirable OEM ECU control, over valve actuation.\u003c\/p\u003e\n\n\u003cp align=\"center\"\u003e\u003cstrong\u003eIn The Box:\u003cbr\u003e\n1 x FMDV23A Valve\u003cbr\u003e\n1 x 2000mm of 4mm Vacuum Tube\u003cbr\u003e\n1 x 50mm of 10mm Vacuum Tube\u003cbr\u003e\n1 x 3 port Solenoid and fixings\u003cbr\u003e\n13 x Cable Ties\u003cbr\u003e\n1 x Uprated Red Spring\u003cbr\u003e\n1 x 10-6-10 T Piece\u003cbr\u003e\n1 x Forge USB Instructions\u003cbr\u003e\n1 x Forge Keyring and Sticker\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf you wish to tune this product to fit the needs of your engine, please see the spring tuning kit below.\u003c\/p\u003e\n\n\u003cp\u003e\u003cimg alt=\"\" class=\"center-block\" src=\"\/userfiles\/Install%20Levels\/5.jpg\"\u003e\u003c\/p\u003e","brand":"Forge Motorsport","offers":[{"title":"Alloy","offer_id":49209165611304,"sku":"FMDV23A-ALL","price":233.49,"currency_code":"GBP","in_stock":true},{"title":"Black","offer_id":49209165676840,"sku":"FMDV23A-BLA","price":233.49,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/5767\/7352\/files\/forge-motorsport-blow-off-valve-renault-megane-rs-280-300-mk4-17-present-blowoff-valves-955.webp?v=1725957727"},{"product_id":"forge-motorsport-brake-lines-renault-megane-rs-280-300-16-21","title":"Forge Motorsport Brake Lines Renault Megane RS 280 300 16-21","description":"\u003cp\u003eA set of 6 ultra-high performance brake lines for the Renault Megane RS 280\/300. These are a direct replacement\/upgrade for the OEM brake line set and require no further modifications to fit.\u003c\/p\u003e\n\n\u003cp\u003eHosetechnik lines are hand-finished with Teflon-lined braided stainless steel bodies and custom-machined stainless fittings, resulting in a brake hose that will perform under the most extreme and harsh conditions, whilst still looking good and performing at the highest level. They are available in multiple hard-wearing PVC sleeve colours, which look amazing, and protect against dirt and water ingress.\u003c\/p\u003e\n\n\u003cdiv class=\"pure-g pure-g-gapped\"\u003e\n\u003cdiv class=\"pure-u-1 pure-u-md-1-3\"\u003e\n\u003cp\u003e\u003cimg alt=\"\" src=\"https:\/\/www.forgemotorsport.co.uk\/userfiles\/images\/sys\/products\/Renault_Megane_RS_280300_Brake_Lines_74747jpeg.jpg\"\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"pure-u-1 pure-u-md-1-3\"\u003e\n\u003cp\u003e\u003cimg alt=\"\" src=\"https:\/\/www.forgemotorsport.co.uk\/userfiles\/images\/sys\/products\/Renault_Megane_RS_280300_Brake_Lines_36663jpeg.jpg\"\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"pure-u-1 pure-u-md-1-3\"\u003e\n\u003cp\u003e\u003cimg alt=\"\" src=\"https:\/\/www.forgemotorsport.co.uk\/userfiles\/images\/sys\/products\/Renault_Megane_RS_280300_Brake_Lines_61299jpeg.jpg\"\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003cp\u003e\u003cbr\u003e\n\u003cbr\u003e\nOur hoses eliminate all the problems associated with standard OE lines\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eImmediate brake pedal response\u003c\/li\u003e\n\t\u003cli\u003eLifetime Warranty\u003c\/li\u003e\n\t\u003cli\u003eChoice of colour\u003c\/li\u003e\n\t\u003cli\u003eReduces pedal sponginess under hard braking\u003c\/li\u003e\n\t\u003cli\u003eCompatible with all brake fluids\u003c\/li\u003e\n\t\u003cli\u003eWill not corrode\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Forge Motorsport","offers":[{"title":"Black","offer_id":49214148509992,"sku":"HT-REN-6-308A-BLACK","price":185.4,"currency_code":"GBP","in_stock":true},{"title":"Blue - Solid","offer_id":49214148739368,"sku":"HT-REN-6-308A-BLUE-SOLID","price":163.88,"currency_code":"GBP","in_stock":true},{"title":"Blue - Transparent","offer_id":49214148870440,"sku":"HT-REN-6-308A-BLUE-TRANSPARENT","price":163.88,"currency_code":"GBP","in_stock":true},{"title":"Clear","offer_id":49214149034280,"sku":"HT-REN-6-308A-CLEAR","price":185.4,"currency_code":"GBP","in_stock":true},{"title":"Green","offer_id":49214149132584,"sku":"HT-REN-6-308A-GREEN","price":185.4,"currency_code":"GBP","in_stock":true},{"title":"Orange","offer_id":49214149296424,"sku":"HT-REN-6-308A-ORANGE","price":185.4,"currency_code":"GBP","in_stock":true},{"title":"Purple","offer_id":49214149394728,"sku":"HT-REN-6-308A-PURPLE","price":185.4,"currency_code":"GBP","in_stock":true},{"title":"Red - Solid","offer_id":49214149493032,"sku":"HT-REN-6-308A-RED-SOLID","price":163.88,"currency_code":"GBP","in_stock":true},{"title":"Red - Transparent","offer_id":49214149624104,"sku":"HT-REN-6-308A-RED-TRANSPARENT","price":163.88,"currency_code":"GBP","in_stock":true},{"title":"Yellow","offer_id":49214149722408,"sku":"HT-REN-6-308A-YELLOW","price":185.4,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/5767\/7352\/files\/forge-motorsport-brake-lines-renault-megane-rs-280-300-16-21-557.webp?v=1726044967"},{"product_id":"forge-motorsport-induction-kit-renault-megane-rs-280-300-16-21","title":"Forge Motorsport Induction Kit Renault Megane RS 280 300 16-21","description":"\u003cp\u003eThe Renault Megane RS 280\/300 intake is the result of widespread design trials through dyno testing and flow analysis. It was developed to achieve three main objectives: \u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003e\u003cstrong\u003eMaintain low inlet temperatures in comparison to other aftermarket induction kits  \u003c\/strong\u003e\u003c\/li\u003e\n\t\u003cli\u003e\u003cstrong\u003eImproved air flow \u003c\/strong\u003e\u003c\/li\u003e\n\t\u003cli\u003e\u003cstrong\u003eLook aesthetically pleasing and enhances the look of your engine bay \u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eOur first criteria has been met by enclosing the \u003ca href=\"https:\/\/ramair-filters.co.uk\/proram\/?page=4\" target=\"_blank\"\u003ePRORam\u003c\/a\u003e filter with our CAD designed sheet aluminum airbox. The OE location for the airbox is not ideal as it is mounted at the back of the engine bay which inherently gets very warm and so it was crucial in our design to make sure we shielded as much of the hot side as possible. It was imperative to incorporate both OE air ducts in our design to allow as much cold air flow to the filter as possible; all these considerations are in order to keep IAT’s as low as possible.\u003c\/p\u003e\n\n\u003cdiv class=\"pure-g pure-g-gapped\"\u003e\n\u003cdiv class=\"pure-u-1 pure-u-md-1-2\"\u003e\n\u003cp\u003e\u003cimg alt=\"\" class=\"center-block\" src=\"\/userfiles\/Products\/FMINDK31\/FMINDK31-DescImage-PeformanceRemapDyno.jpg\"\u003e\u003cbr\u003e\nThe second objective was met by trialing and testing of different air filters and we have even gone to the extent of using two different independent dynos to make sure the data collated was accurate. Results showed that we achieved the best gains with the PRORam performance filter.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"pure-u-1 pure-u-md-1-2\"\u003e\n\u003cp\u003e\u003cimg alt=\"\" class=\"center-block\" src=\"\/userfiles\/Products\/FMINDK31\/FMINDK31-DescImage-PeformanceRemapDynoStaff.jpg\"\u003e\u003cbr\u003e\nUnlike other aftermarket intakes our kit utilises a huge velocity stack that in turn houses the filter which has been designed with a high quality, high flow, synthetic nanofiber filtration media which is pleated to maximize surface area and in turn increase the turbos air flow.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003e\u003cimg alt=\"\" class=\"center-block\" src=\"\/userfiles\/Products\/FMINDK31\/FMINDK31-DescImage-DynoGraph.jpg\"\u003e\u003c\/p\u003e\n\n\u003cp\u003eWhen you look at the data, the gains are there to been seen. The Forge Motorsport intake system makes \u003cstrong\u003e\u003cspan style=\"color:#FF0000;\"\u003e+15bhp\u003c\/span\u003e\u003c\/strong\u003e improvement even though the ambient temperature in the dyno cell has risen +3°C. The biggest gain we achieved was with the combination of both \u003cstrong\u003e\u003cspan style=\"color:#FF0000;\"\u003eFMINDK31\u003c\/span\u003e \u003c\/strong\u003e\u0026amp; \u003cstrong\u003e\u003ca href=\"https:\/\/www.forgemotorsport.co.uk\/Renault_Megane_RS_280300_Turbo_Inlet_Adaptor--product--1969.html\"\u003e\u003cspan style=\"color:#FF0000;\"\u003eFMTIA4\u003c\/span\u003e\u003c\/a\u003e. \u003c\/strong\u003eThis test was conducted at the hottest period of the day, however it made an outstanding \u003cstrong\u003e\u003cspan style=\"color:#FF0000;\"\u003e+20bhp\u003c\/span\u003e\u003c\/strong\u003e along with higher torque figures lower in the rev range, thus improving throttle response. \u003c\/p\u003e\n\n\u003cp\u003eWe also took the liberty to test a rival intake from the marketplace to see how that compared, this also worked well and demonstrated further, the need of free-flowing filtration on this vehicle. \u003c\/p\u003e\n\n\u003cp\u003e\u003cem\u003eThe vehicle used for testing was a Renault Megane 280 cup with Stage one K-tec software and performance exhaust and sports cat.\u003c\/em\u003e\u003c\/p\u003e\n\n\u003cp\u003eTesting was completed on \u003ca href=\"https:\/\/www.litchfieldmotors.com\/\" target=\"_blank\"\u003eLitchfield’s\u003c\/a\u003e Maha dyno, manufactured by the same people who currently supply BMW M sport and Mercedes Benz for all their engine calibration and Dyno testing. We also used \u003ca href=\"https:\/\/www.performanceremap.co.uk\"\u003ePerformance Remap\u003c\/a\u003e in Gloucester with their VTEC 4 wheel-drive dynamometer. This was to ensure all our data has been achieved with results as accurate as possible by conducting all tests on two independent rolling roads.\u003c\/p\u003e\n\n\u003cdiv class=\"pure-g pure-g-gapped\"\u003e\n\u003cdiv class=\"pure-u-1 pure-u-md-1-2\"\u003e\n\u003cp\u003e\u003cimg alt=\"\" src=\"\/userfiles\/Products\/FMINDK31\/FMINDK31-DescImage-EngineBay.jpg\"\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"pure-u-1 pure-u-md-1-2\"\u003e\n\u003cp\u003e\u003cimg alt=\"\" src=\"\/userfiles\/Products\/FMINDK31\/FMINDK31-DescImage-Airbox.jpg\"\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003cp\u003eFinally, the aesthetical challenge to enhance an engine bay which we felt is bland and a bit messy. Obviously, function over form is our number one priority, however we have tried to produce something which is quite stealthy and classy, but is also purposeful. Finished in our black textured powder coating gives the air box an air of OE quality. The cold side of the air box has been left open to aid breathing and show off the large PRORam filter. When taking this product out of the box for the first time you will get to see and feel the quality of this product. Components like the expertly machined MAF boss and the precision laser cut brackets showcase our manufacturing expertise and reassure the enthusiasts the quality is second to none.   \u003c\/p\u003e\n\n\u003cdiv class=\"pure-g pure-g-gapped\"\u003e\n\u003cdiv class=\"pure-u-1 pure-u-md-1-2\"\u003e\n\u003cp\u003e\u003cimg alt=\"\" src=\"\/userfiles\/Products\/FMINDK31\/FMINDK31-DescImage-Kit.jpg\"\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"pure-u-1 pure-u-md-1-2\"\u003e\n\u003cp\u003e\u003cimg alt=\"\" src=\"\/userfiles\/Products\/FMINDK31\/FMINDK31-DescImage-KitFilter.jpg\"\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003cp\u003eAs a by-product of all the above not only will you notice the increased performance but a slight change in your engine acoustics can also be heard. As with all Forge Motorsport products we offer a no quibble \u003ca href=\"https:\/\/www.forgemotorsport.co.uk\/Terms_and_Conditions_UK.html\" target=\"_blank\"\u003elifetime guarantee\u003c\/a\u003e on all parts of this kit excluding the filter.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eA commonly asked question is will this fit a competitor’s \u0026amp; OE turbo inlet hose intake? The answer is yes it will fit other manufacturers inlet hoses and fits to the original Renault inlet hose. \u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eMAF Boss Manufactured from 6082 aerospace grade aluminium. \u003c\/li\u003e\n\t\u003cli\u003eBlack anodised \u0026amp; powder coating for ultimate protection and durability.  \u003c\/li\u003e\n\t\u003cli\u003ePRORAM performance air filter which has been designed with a high quality, high flow, synthetic nanofiber filtration media which is pleated to maximize surface area and in turn increase air flow. \u003c\/li\u003e\n\t\u003cli\u003eNo engine check lights (EML) \u003c\/li\u003e\n\t\u003cli\u003eIncreased air flow  \u003c\/li\u003e\n\t\u003cli\u003eThe Forge silicone hoses in this kit have been designed to include an expensive inner liner of modified silicone known as Fluorosilicone. \u003c\/li\u003e\n\t\u003cli\u003eThis means the hoses are suitable to be used with either modern long-life coolants, Organic Acid Technology coolants (O.A.T.) or air containing oil mist. \u003c\/li\u003e\n\t\u003cli\u003eThe construction of the hoses has been engineered to exceed that of the OEM fitments, and will enhance any engine bay both technically and aesthetically \u003c\/li\u003e\n\t\u003cli\u003eThe use of a Fluorosilicone liner ensures that Forge silicone hoses are the clear market leader. \u003c\/li\u003e\n\t\u003cli\u003eLifetime warranty \u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cimg alt=\"\" class=\"center-block\" src=\"\/userfiles\/Install%20Levels\/3.jpg\"\u003e\u003c\/p\u003e","brand":"Forge Motorsport","offers":[{"title":"Default Title","offer_id":49214162960680,"sku":"FMINDK31","price":308.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/5767\/7352\/files\/forge-motorsport-induction-kit-renault-megane-rs-280-300-16-21-airbox-565.webp?v=1726045888"},{"product_id":"forge-motorsport-inlet-hose-renault-megane-rs-mk4-280-300-16-present","title":"Forge Motorsport Inlet Hose Renault Megane RS Mk4 280 300 16-Present","description":"\u003cp style=\"text-align: center;\"\u003e\u003cstrong\u003e\u003cspan style=\"color:#000000;\"\u003eThis hoses replaces the OEM Renault pipe, part number: 16 57 542 63R\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003cspan style=\"color:#000000;\"\u003eThis reinforced silicone intake hose fits the Renault Megane RS 4 280 \u0026amp; 300. Due to its location it really improves the aesthetics of the engine compartment and removes the restrictions found inside the OEM plastic hard pipe. \u003c\/span\u003e\u003c\/p\u003e\n\n\u003cdiv class=\"pure-g pure-g-gapped\"\u003e\n\u003cdiv class=\"pure-u-1 pure-u-sm-1-2 pure-u-md-1-4\"\u003e\n\u003cp\u003e\u003cimg alt=\"\" src=\"https:\/\/www.forgemotorsport.co.uk\/userfiles\/images\/sys\/products\/Inlet_Hose_for_Renault_Megane_RS_Mk4_280_300_80191jpeg.jpg\"\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"pure-u-1 pure-u-sm-1-2 pure-u-md-1-4\"\u003e\n\u003cp\u003e\u003cimg alt=\"\" src=\"https:\/\/www.forgemotorsport.co.uk\/userfiles\/images\/sys\/products\/Inlet_Hose_for_Renault_Megane_RS_Mk4_280_300_93764jpeg.jpg\"\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"pure-u-1 pure-u-sm-1-2 pure-u-md-1-4\"\u003e\n\u003cp\u003e\u003cimg alt=\"\" src=\"https:\/\/www.forgemotorsport.co.uk\/userfiles\/images\/sys\/products\/Inlet_Hose_for_Renault_Megane_RS_Mk4_280_300_17475jpeg.jpg\"\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"pure-u-1 pure-u-sm-1-2 pure-u-md-1-4\"\u003e\n\u003cp\u003e\u003cimg alt=\"\" src=\"https:\/\/www.forgemotorsport.co.uk\/userfiles\/images\/sys\/products\/Inlet_Hose_for_Renault_Megane_RS_Mk4_280_300_96031jpeg.jpg\"\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003e\u003cspan style=\"color:#000000;\"\u003eComplete with hose clamps these are available in red, yellow, blue, or black. Please select your choice in the options above when ordering.\u003c\/span\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003cimg alt=\"\" class=\"center-block\" src=\"\/userfiles\/Products\/FMINLH14\/FMINLH14-Fitted_DescImage.jpg\"\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003cspan style=\"color:#000000;\"\u003e\u003c\/span\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003e\u003cspan style=\"color:#000000;\"\u003eHighlights: \u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003e\u003cspan style=\"color:#000000;\"\u003eThe Forge silicone hoses in this kit have been designed to include an expensive inner liner of modified silicone known as Fluorosilicone.\u003c\/span\u003e\u003c\/li\u003e\n\t\u003cli\u003e\u003cspan style=\"color:#000000;\"\u003eThis means the hoses are suitable to be used with either modern long-life coolants, Organic Acid Technology coolants (O.A.T.) or air containing oil mist.\u003c\/span\u003e\u003c\/li\u003e\n\t\u003cli\u003e\u003cspan style=\"color:#000000;\"\u003eThe construction of the hoses has been engineered to exceed that of the OEM fitments, and will enhance any engine bay both technically and aesthetically\u003c\/span\u003e\u003c\/li\u003e\n\t\u003cli\u003e\u003cspan style=\"color:#000000;\"\u003eLifetime warranty*\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003e\u003cimg alt=\"\" class=\"center-block\" src=\"\/userfiles\/Install%20Levels\/1.jpg\"\u003e\u003cbr\u003e\n\u003cscript async src=\"\/\/cdn.thinglink.me\/jse\/responsive.js\"\u003e\u003c\/script\u003e\u003c\/p\u003e","brand":"Forge Motorsport","offers":[{"title":"Black","offer_id":49214166630696,"sku":"FMINLH14-BLK","price":61.79,"currency_code":"GBP","in_stock":true},{"title":"Blue","offer_id":49214166696232,"sku":"FMINLH14-BLU","price":61.79,"currency_code":"GBP","in_stock":true},{"title":"Red","offer_id":49214166729000,"sku":"FMINLH14-RED","price":61.79,"currency_code":"GBP","in_stock":true},{"title":"Yellow","offer_id":49214166794536,"sku":"FMINLH14-YEL","price":61.79,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/5767\/7352\/files\/forge-motorsport-inlet-hose-renault-megane-rs-mk4-280-300-16-present-kits-261.webp?v=1726046407"},{"product_id":"forge-motorsport-intercooler-renault-megane-mk4-r-s-280-300-16-present","title":"Forge Motorsport Intercooler Renault Megane Mk4 R.S 280 300 16-Present","description":"\u003cul\u003e\n\t\u003cli\u003eHand fabricated\u003c\/li\u003e\n\t\u003cli\u003eLightweight - Tube and Fin core\u003c\/li\u003e\n\t\u003cli\u003eStepped core design\u003c\/li\u003e\n\t\u003cli\u003e41% capacity increase over OE intercooler\u003c\/li\u003e\n\t\u003cli\u003e\n\u003cstrong\u003eGains of 8bhp \u003c\/strong\u003e(see description for more information)\u003c\/li\u003e\n\t\u003cli\u003e\n\u003cstrong\u003eGains of up to 20NM \u003c\/strong\u003e(see description for more information)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp align=\"center\"\u003e\u003cimg src=\"https:\/\/www.forgemotorsport.co.uk\/userfiles\/images\/FORGE-WEB-DIVIDER.png\"\u003e\u003c\/p\u003e\n\n\u003cp\u003eFMINT17 is our intercooler upgrade for the Renault Megane Mk4 R.S. We had received reports of this vehicle producing high IAT’s especially in hotter climates when driven hard. Our objective as always was to improve and overcome these issues as well as manufacture a product to the highest standard and quality. This however was not going to be a quick or easy process as with the Megane IV, R.S, Renault had decided to utilize a setup which does not lend itself well to improve its cooling package without a costly overhaul. Renault even went to the extent of using \u003cstrong\u003emembers of it’s F1 team to help with the design\u003c\/strong\u003e of this vehicle so the challenge to improve it cost effectively has been difficult, but with FMINT17, we have achieved this goal.\u003c\/p\u003e\n\n\u003cp\u003eUsing our \u003cstrong\u003ehighly skilled CAD team\u003c\/strong\u003e and fabrication department we went to work designing an intercooler which would occupy the original space without the need to modify the vehicle, while at the same time design a product with a greater capacity core for the optimum performance. \u003c\/p\u003e\n\n\u003cdiv class=\"pure-g pure-g-gapped\"\u003e\n\u003cdiv class=\"pure-u-1 pure-u-md-1-3\"\u003e\n\u003cp\u003e\u003cimg alt=\"\" src=\"https:\/\/www.forgemotorsport.co.uk\/userfiles\/images\/sys\/products\/Intercooler_for_the_Renault_Megane_4_RS_280300_48175jpeg.jpg\"\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"pure-u-1 pure-u-md-1-3\"\u003e\n\u003cp\u003e\u003cimg alt=\"\" src=\"https:\/\/www.forgemotorsport.co.uk\/userfiles\/images\/sys\/products\/Intercooler_for_the_Renault_Megane_4_RS_280300_27515jpeg.jpg\"\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"pure-u-1 pure-u-md-1-3\"\u003e\n\u003cp\u003e\u003cimg alt=\"\" src=\"https:\/\/www.forgemotorsport.co.uk\/userfiles\/images\/sys\/products\/Intercooler_for_the_Renault_Megane_4_RS_280300_19942jpeg.jpg\"\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003cp\u003eThe end tanks have been a key part of the design of this intercooler, and we have opted for our classic and proven sheet metal construction which is folded in a way to produce a shallow and fast flowing design with negligible back pressure. It is also \u003cstrong\u003elightweight \u003c\/strong\u003eas this was another key element in our design brief, to manufacture a high performing intercooler as light as we can; this element also has a significant impact on our choice of intercooler core.\u003c\/p\u003e\n\n\u003cp\u003eOnce we had produced an end tank design, we specified several different intercooler core constructions before we started our vigorous dyno testing. Our research and compiled data pointed to the use of a tube and fin core construction, this UK manufactured component really worked well and again was the best option to keep weight to a minimum. The stepped core design is \u003cstrong\u003e41% larger in capacity\u003c\/strong\u003e over the OE intercooler and the final product achieved \u003cstrong\u003egains of 8bhp with an increase of 12NM of torque\u003c\/strong\u003e between 1900 RPM and 2500 RPM along with \u003cstrong\u003e20NM between 5500 RPM and 6000 RPM\u003c\/strong\u003e.This makes the Megane feel and pull stronger at the top of the rev band and when combined with a vehicle equipped with upgraded ECU software like our development vehicle the whole package transforms the 1.8T power plant into the motor this Megane R.S deserves.\u003c\/p\u003e\n\n\u003cp\u003eFMINT17 is finished in our anti-corrosion powder coating which not only helps preserve this intercooler from harsh environments it also aids its thermal properties. As with all Forge Motorsport fabricated products this intercooler has the legendary Forge \u003cstrong\u003eLifetime warranty\u003c\/strong\u003e.\u003c\/p\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp align=\"center\"\u003e\u003cstrong\u003eWhy do we test different cores?\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp align=\"center\"\u003e\u003cimg src=\"https:\/\/www.forgemotorsport.co.uk\/userfiles\/images\/FORGE-WEB-DIVIDER.png\"\u003e\u003c\/p\u003e\n\n\u003cp\u003eHere at Forge Motorsport, when developing an intercooler, we will test several different cores for each application. For example, a bar and plate style core, a tube and fin style core along with different fin pitches and heights e.g. 22 fins per inch or 17 fins per inch, as well as changing the internal fin pitches\/shapes and density within the tube enabling to fine tune the amount of pressure drop the intercooler produces.\u003c\/p\u003e\n\n\u003cdiv class=\"pure-g pure-g-gapped\"\u003e\n\u003cdiv class=\"pure-u-1 pure-u-md-1-3\"\u003e\n\u003cp\u003e\u003cimg alt=\"\" src=\"https:\/\/www.forgemotorsport.co.uk\/userfiles\/images\/sys\/products\/Intercooler_for_the_Renault_Megane_Mk4_RS_280300_84790jpeg.jpg\"\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"pure-u-1 pure-u-md-1-3\"\u003e\n\u003cp\u003e\u003cimg alt=\"\" src=\"https:\/\/www.forgemotorsport.co.uk\/userfiles\/images\/sys\/products\/Intercooler_for_the_Renault_Megane_Mk4_RS_280300_14731jpeg.jpg\"\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"pure-u-1 pure-u-md-1-3\"\u003e\n\u003cp\u003e\u003cimg alt=\"\" src=\"https:\/\/www.forgemotorsport.co.uk\/userfiles\/images\/sys\/products\/Intercooler_for_the_Renault_Megane_Mk4_RS_280300_50177jpeg.jpg\"\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003cp\u003ePressure drop is not always a bad thing, as our testing and research has proven on various projects. This is because the pressurized air velocity is being stalled by the pressure drop within the cooler thus allowing more time to cool the air within the cooler itself, as air passes through the non-pressurized face of the core that is open to the atmosphere. Too much pressure drop can of course have a problem on the higher performance engines as the intercooler reaches its maximum efficiency the turbo has to work a lot harder to force the air through the core. This in turn creates higher inlet air temps (IAT’s) due to the turbo creating more heat as it is over stressed and worked harder.\u003c\/p\u003e\n\n\u003cp\u003eHaving no pressure drop can also prove to be inefficient as the cooler will not lower the charge temperature again resulting in higher inlet air temperatures.\u003c\/p\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp align=\"center\"\u003e\u003cstrong\u003eDyno Results\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp align=\"center\"\u003e\u003cimg src=\"https:\/\/www.forgemotorsport.co.uk\/userfiles\/images\/FORGE-WEB-DIVIDER.png\"\u003e\u003c\/p\u003e\n\n\u003cp\u003eTesting was completed on \u003ca href=\"https:\/\/www.litchfieldmotors.com\/\" target=\"_blank\"\u003eLitchfield’s\u003c\/a\u003e Maha dyno, manufactured by the same people who currently supply BMW M sport and Mercedes Benz for all their engine calibration and dyno testing. We also took the opportunity to use Performance Remap Gloucester dyno to compare results and ensure the most accurate data.\u003c\/p\u003e\n\n\u003cp\u003eThe stepped core design is \u003cstrong\u003e41% larger in capacity\u003c\/strong\u003e over the OE intercooler and the final product achieved \u003cstrong\u003egains of 8bhp with an increase of 12NM of torque\u003c\/strong\u003e between 1900 RPM and 2500 RPM along with \u003cstrong\u003e20NM between 5500 RPM and 6000 RPM\u003c\/strong\u003e.\u003c\/p\u003e\n\n\u003cp\u003e\u003cimg alt=\"\" class=\"center-block\" src=\"https:\/\/www.forgemotorsport.co.uk\/userfiles\/images\/FORGE-WEB-DIVIDER.png\"\u003e\u003c\/p\u003e\n\n\u003ch2 style=\"text-align: center;\"\u003e\u003cstrong\u003eComplimentary Products\u003c\/strong\u003e\u003c\/h2\u003e\n\n\u003cp\u003eThis blow off, or \u003ca href=\"https:\/\/www.forgemotorsport.co.uk\/Blow_Off_Valve_for_Renault_Megane_RS_280_300_Mk4--product--1787.html\" target=\"_blank\"\u003edump valve\u003c\/a\u003e, is for the Renault and Nissan Turbo engines that have the electronically controlled bypass valve (OEM Part no. 144839204R). It is recommended for any vehicle where the boost pressure has been increased by an ECU software upgrade and for unmodified vehicles operating in warmer climates, as a solution to the many failures that have occurred.\u003c\/p\u003e\n\n\u003cdiv class=\"pure-g pure-g-gapped\"\u003e\n\u003cdiv class=\"pure-u-1 pure-u-md-1-3\"\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.forgemotorsport.co.uk\/Blow_Off_Valve_for_Renault_Megane_RS_280_300_Mk4--product--1787.html\" target=\"_blank\"\u003e\u003cimg alt=\"\" src=\"https:\/\/www.forgemotorsport.co.uk\/userfiles\/images\/sys\/products\/Blow_Off_Valve_for_Renault_Megane_RS_280_Mk4_83308jpeg.jpg\"\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"pure-u-1 pure-u-md-1-3\"\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.forgemotorsport.co.uk\/Blow_Off_Valve_for_Renault_Megane_RS_280_300_Mk4--product--1787.html\" target=\"_blank\"\u003e\u003cimg alt=\"\" src=\"https:\/\/www.forgemotorsport.co.uk\/userfiles\/images\/sys\/products\/Blow_Off_Valve_for_Renault_Megane_RS_280_Mk4_10291jpeg.jpg\"\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"pure-u-1 pure-u-md-1-3\"\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.forgemotorsport.co.uk\/Blow_Off_Valve_for_Renault_Megane_RS_280_300_Mk4--product--1787.html\" target=\"_blank\"\u003e\u003cimg alt=\"\" src=\"https:\/\/www.forgemotorsport.co.uk\/userfiles\/images\/sys\/products\/Blow_Off_Valve_for_Renault_Megane_RS_280_Mk4_40891jpeg.jpg\"\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003cp\u003e\u003cstrong\u003e\u003cimg alt=\"\" class=\"center-block\" src=\"https:\/\/www.forgemotorsport.co.uk\/userfiles\/images\/FORGE-WEB-DIVIDER.png\"\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eWith the success of the existing range of Forge Motorsport product for the Renault Megane R.S 280\/300, we have decided to further expand our tuning parts range for this vehicle. We are excited to offer the \u003ca href=\"https:\/\/www.forgemotorsport.co.uk\/Renault_Megane_RS_280300_Turbo_Inlet_Adaptor--product--1969.html\" target=\"_blank\"\u003eFMTIA4\u003c\/a\u003e turbo inlet adaptor. Designed and developed by our highly skilled team on the SolidWorks CAD system, the all billet turbo adaptor and high flow silicone inlet pipe is proven to benefit your engines performance.\u003c\/p\u003e\n\n\u003cdiv class=\"pure-g pure-g-gapped\"\u003e\n\u003cdiv class=\"pure-u-1 pure-u-md-1-3\"\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.forgemotorsport.co.uk\/Renault_Megane_RS_280300_Turbo_Inlet_Adaptor--product--1969.html\" target=\"_blank\"\u003e\u003cimg alt=\"\" src=\"https:\/\/www.forgemotorsport.co.uk\/userfiles\/images\/sys\/products\/Renault_Megane_RS_280300_Turbo_inlet_adaptor_80767jpeg.jpg\"\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"pure-u-1 pure-u-md-1-3\"\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.forgemotorsport.co.uk\/Renault_Megane_RS_280300_Turbo_Inlet_Adaptor--product--1969.html\" target=\"_blank\"\u003e\u003cimg alt=\"\" src=\"https:\/\/www.forgemotorsport.co.uk\/userfiles\/images\/sys\/products\/Renault_Megane_RS_280300_Turbo_inlet_adaptor_18645jpeg.jpg\"\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"pure-u-1 pure-u-md-1-3\"\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.forgemotorsport.co.uk\/Renault_Megane_RS_280300_Turbo_Inlet_Adaptor--product--1969.html\" target=\"_blank\"\u003e\u003cimg alt=\"\" src=\"https:\/\/www.forgemotorsport.co.uk\/userfiles\/images\/sys\/products\/Renault_Megane_RS_280300_Turbo_inlet_adaptor_40862jpeg.jpg\"\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003cp\u003e\u003cstrong\u003e\u003cimg alt=\"\" class=\"center-block\" src=\"https:\/\/www.forgemotorsport.co.uk\/userfiles\/images\/FORGE-WEB-DIVIDER.png\"\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThe Renault Megane RS 280\/300 \u003ca href=\"https:\/\/www.forgemotorsport.co.uk\/Renault_Megane_RS_280300_Induction_Kit--product--1983.html\" target=\"_blank\"\u003eintake\u003c\/a\u003e is the result of widespread design trials through dyno testing and flow analysis. It was developed to achieve three main objectives: Maintain low inlet temperatures in comparison to other aftermarket induction kits; Improved air flow; look aesthetically pleasing and enhances the look of your engine bay \u003c\/p\u003e\n\n\u003cdiv class=\"pure-g pure-g-gapped\"\u003e\n\u003cdiv class=\"pure-u-1 pure-u-sm-1-2 pure-u-md-1-4\"\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.forgemotorsport.co.uk\/Renault_Megane_RS_280300_Induction_Kit--product--1983.html\" target=\"_blank\"\u003e\u003cimg alt=\"\" src=\"https:\/\/www.forgemotorsport.co.uk\/userfiles\/images\/sys\/products\/Renault_Megane_RS_280300_Induction_Kit_74943jpeg.jpg\"\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"pure-u-1 pure-u-sm-1-2 pure-u-md-1-4\"\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.forgemotorsport.co.uk\/Renault_Megane_RS_280300_Induction_Kit--product--1983.html\" target=\"_blank\"\u003e\u003cimg alt=\"\" src=\"https:\/\/www.forgemotorsport.co.uk\/userfiles\/images\/sys\/products\/Renault_Megane_RS_280300_Induction_Kit_94870jpeg.jpg\"\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"pure-u-1 pure-u-sm-1-2 pure-u-md-1-4\"\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.forgemotorsport.co.uk\/Renault_Megane_RS_280300_Induction_Kit--product--1983.html\" target=\"_blank\"\u003e\u003cimg alt=\"\" src=\"https:\/\/www.forgemotorsport.co.uk\/userfiles\/images\/sys\/products\/Renault_Megane_RS_280300_Induction_Kit_25046jpeg.jpg\"\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"pure-u-1 pure-u-sm-1-2 pure-u-md-1-4\"\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.forgemotorsport.co.uk\/Renault_Megane_RS_280300_Induction_Kit--product--1983.html\" target=\"_blank\"\u003e\u003cimg alt=\"\" src=\"https:\/\/www.forgemotorsport.co.uk\/userfiles\/images\/sys\/products\/Renault_Megane_RS_280300_Induction_Kit_95617jpeg.jpg\"\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Forge Motorsport","offers":[{"title":"Default Title","offer_id":49214171808040,"sku":"FMINT17","price":744.59,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/5767\/7352\/files\/forge-motorsport-intercooler-renault-megane-mk4-r-s-280-300-16-present-intercoolers-800.webp?v=1726046597"},{"product_id":"forge-motorsport-recirculating-valve-renault-megane-rs-280-300-mk4-17-22","title":"Forge Motorsport Recirculating Valve Renault Megane RS 280 300 Mk4 17-22","description":"\u003cp style=\"text-align: center;\"\u003e\u003cstrong\u003eWe recommend \u003ca href=\"https:\/\/eur02.safelinks.protection.outlook.com\/?url=https%3A%2F%2Fwww.forgemotorsport.co.uk%2FForge_Motorsport_Valve_Service_Kit--product--792.html\u0026amp;data=04%7C01%7CRyan.Maycroft%40forgemotorsport.co.uk%7C9c527b77984b421fd86f08d9e1783ae2%7C00abb41a5cc64513a26ba55e77093699%7C0%7C0%7C637788728786603849%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000\u0026amp;sdata=8p3zqmZThRr506CQrPiETtkslneZ4wQqshiIZHabfjo%3D\u0026amp;reserved=0\"\u003eservicing\u003c\/a\u003e your valve every 3 years, or 20,000 miles, whichever comes sooner\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis recirculating valve is for the Renault and Nissan Turbo engines that have the electronically controlled bypass valve (OEM Part no. \u003cstrong\u003e144839204R\u003c\/strong\u003e). It is recommended for any vehicle where the boost pressure has been increased by an ECU software upgrade and for unmodified vehicles operating in warmer climates, as a solution to the many failures that have occurred. Unfortunately, the failure doesn’t always result in a check engine light as the valve can still be blown open by the boost pressure, so you may not be aware that you are losing power due to this. This prevents the diaphragm from sealing.\u003c\/p\u003e\n\n\u003cp\u003eOur alternative is a fully engineered solution offering both significantly improved reliability. The Forge valve is piston based, there is no diaphragm to fail, and of all aluminium billet construction, it replaces the original unit with a pressure\/vacuum operated piston valve that still also retains the desirable OEM ECU control, over valve actuation.\u003c\/p\u003e\n\n\u003cp align=\"center\"\u003e\u003cstrong\u003eIn The Box:\u003cbr\u003e\n1 x FMDV23R Valve\u003cbr\u003e\n1 x 2000mm of 4mm Vacuum Tube\u003cbr\u003e\n1 x 50mm of 10mm Vacuum Tube\u003cbr\u003e\n1 x 3 port Solenoid and fixings\u003cbr\u003e\n13 x Cable Ties\u003cbr\u003e\n1 x Uprated Red Spring\u003cbr\u003e\n1 x 10-6-10 T Piece\u003cbr\u003e\n1 x Forge USB Instructions\u003cbr\u003e\n1 x Forge Keyring and Sticker\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf you wish to tune this product to fit the needs of your engine, please see the spring tuning kit below.\u003c\/p\u003e\n\n\u003cp\u003e\u003cimg alt=\"\" class=\"center-block\" src=\"\/userfiles\/Install%20Levels\/5.jpg\"\u003e\u003c\/p\u003e","brand":"Forge Motorsport","offers":[{"title":"Alloy","offer_id":49214175314216,"sku":"FMDV23R-ALL","price":233.49,"currency_code":"GBP","in_stock":true},{"title":"Black","offer_id":49214175478056,"sku":"FMDV23R-BLA","price":233.49,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/5767\/7352\/files\/forge-motorsport-recirculating-valve-renault-megane-rs-280-300-mk4-17-22-blowoff-valves-459.webp?v=1726044307"},{"product_id":"forge-motorsport-turbo-blanket-renault-megane-mk3-r-s-18-22","title":"Forge Motorsport Turbo Blanket Renault Megane Mk3 R.S 18-22","description":"\u003cp\u003eThe Forge Motorsport \u003cstrong\u003eFMTUBL15 \u003c\/strong\u003ehas been designed specifically for the \u003cstrong\u003eRenault Megane Mk3 R.S\u003c\/strong\u003e range stock turbo chargers. This turbo blanket replaces the primitive OE heat shield and is designed to further \u003cstrong\u003eisolate the radiant heat produced by the turbocharger.\u003c\/strong\u003e The Forge turbo blanket also incorporates further protection to the engines down pipe. \u003c\/p\u003e\n\n\u003cp\u003eThis design has been created to \u003cstrong\u003ewithstand the harshest of environments\u003c\/strong\u003e and proven to withstand temperatures up to 1370°C (2500°F) of radiant heat, which will assist in protecting and\u003cstrong\u003e prolonging the life of engine components\u003c\/strong\u003e.\u003c\/p\u003e\n\n\u003cdiv class=\"pure-g pure-g-gapped\"\u003e\n\u003cdiv class=\"pure-u-1 pure-u-md-1-3\"\u003e\n\u003cp\u003e\u003cimg alt=\"\" src=\"https:\/\/www.forgemotorsport.co.uk\/userfiles\/images\/sys\/products\/Turbo_Blanket_for_Renault_Megane_Mk3_RS_62859jpeg.jpg\"\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"pure-u-1 pure-u-md-1-3\"\u003e\n\u003cp\u003e\u003cimg alt=\"\" src=\"https:\/\/www.forgemotorsport.co.uk\/userfiles\/images\/sys\/products\/Turbo_Blanket_for_Renault_Megane_Mk3_RS_29860jpeg.jpg\"\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"pure-u-1 pure-u-md-1-3\"\u003e\n\u003cp\u003e\u003cimg alt=\"\" src=\"https:\/\/www.forgemotorsport.co.uk\/userfiles\/images\/sys\/products\/Turbo_Blanket_for_Renault_Megane_Mk3_RS_79829jpeg.jpg\"\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003cp\u003eDesign innovation keeps the heat of the exhaust gases contained within the hot side of the turbocharger, away from the cool side and the intake path which helps \u003cstrong\u003ereduce turbo lag and air intake temperatures\u003c\/strong\u003e \u003cstrong\u003eresulting in more power.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eStainless Steel Rivets and Fasteners\u003c\/li\u003e\n\t\u003cli\u003eCarbon fabric outer shell\u003c\/li\u003e\n\t\u003cli\u003eCalcium Magnesium Silicate Wool constructed Inner Core\u003c\/li\u003e\n\t\u003cli\u003eHigh temperature Silica fabric\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"pure-g pure-g-gapped\"\u003e\n\u003cdiv class=\"pure-u-1 pure-u-md-1-3\"\u003e\n\u003cp\u003e\u003cimg alt=\"\" src=\"https:\/\/www.forgemotorsport.co.uk\/userfiles\/images\/sys\/products\/Turbo_Blanket_for_Renault_Megane_Mk3_RS_85521jpeg.jpg\"\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"pure-u-1 pure-u-md-1-3\"\u003e\n\u003cp\u003e\u003cimg alt=\"\" src=\"https:\/\/www.forgemotorsport.co.uk\/userfiles\/images\/sys\/products\/Turbo_Blanket_for_Renault_Megane_Mk3_RS_92117jpeg.jpg\"\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"pure-u-1 pure-u-md-1-3\"\u003e\n\u003cp\u003e\u003cimg alt=\"\" src=\"https:\/\/www.forgemotorsport.co.uk\/userfiles\/images\/sys\/products\/Turbo_Blanket_for_Renault_Megane_Mk3_RS_12719jpeg.jpg\"\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003cp\u003e\u003cimg alt=\"\" class=\"center-block\" src=\"https:\/\/www.forgemotorsport.co.uk\/userfiles\/images\/FORGE-WEB-DIVIDER.png\" style=\"width: 600px; height: 39px;\"\u003e\u003c\/p\u003e\n\n\u003ch2 style=\"text-align: center;\"\u003e\u003cstrong\u003eComplimentary Products\u003c\/strong\u003e\u003c\/h2\u003e\n\n\u003cdiv class=\"pure-g pure-g-gapped\"\u003e\n\u003cdiv class=\"pure-u-1 pure-u-md-1-3\"\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.forgemotorsport.co.uk\/Blow_Off_Valve_for_Renault_Megane_RS250265275--product--786.html\" target=\"_blank\"\u003e\u003cimg alt=\"\" src=\"https:\/\/www.forgemotorsport.co.uk\/userfiles\/images\/sys\/products\/Blow_Off_Valve_for_Renault_Megane_RS250265275_97968jpeg.jpg\"\u003e\u003c\/a\u003e\u003c\/p\u003e\n\n\u003cp style=\"text-align: center;\"\u003e\u003ca class=\"generated_button\" href=\"https:\/\/www.forgemotorsport.co.uk\/Blow_Off_Valve_for_Renault_Megane_RS250265275--product--786.html\" target=\"_blank\"\u003eBlow Off Valve\u003c\/a\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"pure-u-1 pure-u-md-1-3\"\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.forgemotorsport.co.uk\/Adjustable_Actuator_for_Renault_Megane_225230_and_RS250265275--product--84.html\" target=\"_blank\"\u003e\u003cimg alt=\"\" src=\"https:\/\/www.forgemotorsport.co.uk\/userfiles\/images\/sys\/products\/Adjustable_Actuator_for_Renault_Megane_225230_and_RS250265275_25211jpeg.jpg\"\u003e\u003c\/a\u003e\u003c\/p\u003e\n\n\u003cp style=\"text-align: center;\"\u003e\u003ca class=\"generated_button\" href=\"https:\/\/www.forgemotorsport.co.uk\/Adjustable_Actuator_for_Renault_Megane_225230_and_RS250265275--product--84.html\" target=\"_blank\"\u003eActuator\u003c\/a\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"pure-u-1 pure-u-md-1-3\"\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.forgemotorsport.co.uk\/Intercooler_for_the_Renault_Megane_RS250265275--product--718.html\" target=\"_blank\"\u003e\u003cimg alt=\"\" src=\"https:\/\/www.forgemotorsport.co.uk\/userfiles\/images\/sys\/products\/Intercooler_for_the_Renault_Megane_RS250__Hot_Climate_Version_12839.jpeg\"\u003e\u003c\/a\u003e\u003c\/p\u003e\n\n\u003cp style=\"text-align: center;\"\u003e\u003ca class=\"generated_button\" href=\"https:\/\/www.forgemotorsport.co.uk\/Intercooler_for_the_Renault_Megane_RS250265275--product--718.html\" target=\"_blank\"\u003eIntercooler\u003c\/a\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Forge Motorsport","offers":[{"title":"Default Title","offer_id":49219555164456,"sku":"FMTUBL15","price":123.59,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/5767\/7352\/files\/forge-motorsport-turbo-blanket-renault-megane-mk3-r-s-18-22-thermal-management-590.webp?v=1726131887"},{"product_id":"forge-motorsport-turbo-inlet-adaptor-renault-megane-rs-280-300-16-21","title":"Forge Motorsport Turbo Inlet Adaptor Renault Megane RS 280 300 16-21","description":"\u003cp\u003eWith the success of the existing range of Forge Motorsport product for the Renault Megane R.S 280\/300, we have decided to further expand our tuning parts range for this vehicle. We are excited to release the FMTIA4 Turbo inlet adaptor.\u003c\/p\u003e\n\n\u003cdiv class=\"pure-g pure-g-gapped\"\u003e\n\u003cdiv class=\"pure-u-1 pure-u-md-1-3\"\u003e\n\u003cp\u003e\u003cimg alt=\"\" src=\"https:\/\/www.forgemotorsport.co.uk\/userfiles\/images\/sys\/products\/Renault_Megane_RS_280300_Turbo_inlet_adaptor_18645jpeg.jpg\"\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"pure-u-1 pure-u-md-1-3\"\u003e\n\u003cp\u003e\u003cimg alt=\"\" src=\"https:\/\/www.forgemotorsport.co.uk\/userfiles\/images\/sys\/products\/Renault_Megane_RS_280300_Turbo_inlet_adaptor_80767jpeg.jpg\"\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"pure-u-1 pure-u-md-1-3\"\u003e\n\u003cp\u003e\u003cimg alt=\"\" src=\"https:\/\/www.forgemotorsport.co.uk\/userfiles\/images\/sys\/products\/Renault_Megane_RS_280300_Turbo_inlet_adaptor_28274jpeg.jpg\"\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003cp\u003eDesigned and developed by our highly skilled team on the SolidWorks CAD system, the all billet turbo adaptor and high flow silicone inlet pipe is proven to benefit your engines performance. This is one of the weak links on many cars and the Megane was no exception with its intake system being restrictive, the narrow bore plastic inlet pipe restricts the air flow on stage 1 and 2 tuned vehicles. \u003c\/p\u003e\n\n\u003cp\u003e\u003cimg alt=\"\" class=\"center-block\" src=\"\/userfiles\/Products\/FMTIA4\/OEM-FMTIA4_WEB.jpg\"\u003e\u003c\/p\u003e\n\n\u003cp\u003eThe hours of development and testing are translated into the results you can see on the dyno graph below. This is a component which is proven to increase power.\u003c\/p\u003e\n\n\u003cp\u003e\u003cimg alt=\"\" class=\"center-block\" src=\"\/userfiles\/Products\/FMTIA4\/FMTIA4-Dynograph.jpg\"\u003e\u003c\/p\u003e\n\n\u003cp\u003eCombined with our intake and high performance PRO-RAM air filter (FMINDK31) the gain from the turbo adaptor alone was an average 5 BHP along with a gain in torque it really transforms your driving experience, the power can be felt from just above 2900 RPM and helps keep a hard consistent pull all the way to the rev limiter. Testing was completed on an independent dyno at \u003ca href=\"https:\/\/www.performanceremap.co.uk\/\" target=\"_blank\"\u003ePerformance Remap\u003c\/a\u003e in Gloucester on their VTEC 4 wheel-drive dynamometer.\u003c\/p\u003e\n\n\u003cdiv class=\"pure-g pure-g-gapped\"\u003e\n\u003cdiv class=\"pure-u-1 pure-u-md-1-2\"\u003e\n\u003cp\u003e\u003cimg alt=\"\" class=\"center-block\" src=\"\/userfiles\/Products\/FMTIA4\/FMTIA4-Megane.jpg\"\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"pure-u-1 pure-u-md-1-2\"\u003e\n\u003cp\u003e\u003cimg alt=\"\" class=\"center-block\" src=\"\/userfiles\/Products\/FMTIA4\/FMTIA4-MeganeEngineBay.jpg\"\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003cp\u003eThe Forge developed turbo inlet adaptor improves your Meganes airflow in several ways; designed in a similar way to a conventional velocity stack it routes the air more directly into your turbo charger and allows more air to be compressed due to its larger capacity, this can have a positive effect on accelerating your vehicle after long deceleration or in between gear changes due to more air being kept within the intake system.\u003c\/p\u003e\n\n\u003cp\u003eThe Forge Motorsport turbo inlet adaptor and high flow inlet pipe has a capacity of more than \u003cstrong\u003e59%\u003c\/strong\u003e over the stock item. Not only will you notice the increased performance but a slight change in your engine acoustics can also be heard. As with all Forge Motorsport products we offer a no quibble lifetime guarantee on both the silicone hose and billet adaptor. \u003c\/p\u003e\n\n\u003cp\u003eA commonly asked question is will this fit a competitor’s intake? the answer is yes it will fit other manufacturers intakes and fits to the original airbox.\u003c\/p\u003e\n\n\u003cp\u003eThis is a simple installation and a modification that releases even more power from the Renault’s motor and fitting takes typically around 30 minutes. The product includes a full set of comprehensive installation instructions to aid with fitting.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eKey Facts:\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eManufactured from 6082 aerospace grade aluminium\u003c\/li\u003e\n\t\u003cli\u003eBlack anodised for ultimate protection and durability\u003c\/li\u003e\n\t\u003cli\u003eIncreased capacity of over 59% \u003c\/li\u003e\n\t\u003cli\u003eNo engine check lights (EML)\u003c\/li\u003e\n\t\u003cli\u003eIncreased air flow over stock item\u003c\/li\u003e\n\t\u003cli\u003eThe Forge silicone hoses in this kit have been designed to include a specialist inner liner of modified silicone known as Fluorosilicone.\u003c\/li\u003e\n\t\u003cli\u003eThis means the hoses are suitable to be used with either modern long-life coolants, Organic Acid Technology coolants (O.A.T.) or air containing oil mist.\u003c\/li\u003e\n\t\u003cli\u003eThe construction of the hoses has been engineered to exceed that of the OEM fitments, and will enhance any engine bay both technically and aesthetically\u003c\/li\u003e\n\t\u003cli\u003eThe use of a Fluorosilicone liner ensures that Forge silicone hoses are the clear market leader\u003c\/li\u003e\n\t\u003cli\u003eLifetime warranty \u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Forge Motorsport","offers":[{"title":"Black Hose","offer_id":49219560964392,"sku":"FMTIA4-BLA","price":170.42,"currency_code":"GBP","in_stock":true},{"title":"Blue Hose","offer_id":49219561029928,"sku":"FMTIA4-BLU","price":170.42,"currency_code":"GBP","in_stock":true},{"title":"Red Hose","offer_id":49219561062696,"sku":"FMTIA4-RED","price":170.42,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/5767\/7352\/files\/forge-motorsport-turbo-inlet-adaptor-renault-megane-rs-280-300-16-21-blue-hose-intake-pipes-895.webp?v=1726132655"}],"url":"https:\/\/www.tegiwa.com\/collections\/renault-megane-rs-300-gearbox-differential-clutch-flywheel-drivetrain-upgrades.oembed","provider":"Tegiwa","version":"1.0","type":"link"}