{"title":"Porsche 911 996 Gearbox, Differential, Clutch, Flywheel \u0026 Drivetrain Upgrades","description":null,"products":[{"product_id":"grams-performance-injector-kit-porsche-911-996-3-4l-99-04","title":"Grams Performance Injector Kit Porsche 911 996 3.4L 99-04","description":"Grams Performance is  the most innovative high-performance fuel injectors for today’s performance vehicles. Premium materials, advanced manufacturing techniques, and stringent quality control procedures make Grams Performance the leader in high-performance fuel injectors.\u003cbr\u003e\u003cbr\u003eAn engine’s fuel injectors perform a vital role in the accurate metering and atomization of fuel. Grams Performance accomplishes this with its high-impedance Bosch EV14 fuel injectors that are modified for high-performance use. Each injector is individually balanced, flow tested, and dynamically matched for characterization within one percent of each other. \u003cbr\u003e\u003cbr\u003eThe EV14 injector’s superior ball\/pintle valves combine with Grams Performance precision-modified nozzles allow for consistent performance up to 118 psi, making them suitable for a wide range of applications, yet without exhibiting any of the high-pressure problems often associated with other injectors. The optimized spray pattern also helps improve mixture preparation as well as atomization. Grams Performance injectors are cold cut with diamond grinders in less than three seconds for high performance with pre-seating. Abrasive cutting creates heat, which leads to poor spray patterns and the need for competitors to pre-seat their injectors to reduce distortion. Each injector is also fitted with high-quality Viton O-rings that are resistant to extreme temperatures and harmful oils found in some fuels. \u003cbr\u003e\u003cbr\u003eEach injector set includes dead time compensation values to help ensure consistent air\/fuel ratios and optimal performance when tuning. Grams Performance Fuel Injectors are carefully tested and matched in controlled laboratory environments using state-of-the-art equipment and are subjected to rigorous dyno, street, and racetrack testing to ensure proper performance in the most extreme conditions.","brand":"Grams Performance","offers":[{"title":"550cc","offer_id":47075631792424,"sku":"GP-G2-0550-1300","price":561.98,"currency_code":"GBP","in_stock":true},{"title":"750cc","offer_id":47075631825192,"sku":"GP-G2-0750-1300","price":701.57,"currency_code":"GBP","in_stock":true},{"title":"1000cc","offer_id":47075631857960,"sku":"GP-G2-1000-1300","price":701.57,"currency_code":"GBP","in_stock":true},{"title":"1150cc","offer_id":47075631890728,"sku":"GP-G2-1150-1300","price":862.55,"currency_code":"GBP","in_stock":true},{"title":"1600cc","offer_id":47075631923496,"sku":"GP-G2-1600-1300","price":1355.68,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/5767\/7352\/files\/grams-performance-injector-kit-porsche-911-996-3-4l-99-04-550cc-fuel-injectors-315.webp?v=1745066183"},{"product_id":"ngk-spark-plugs-porsche-911-996-3-4-boxster-986-2-7-3-2-x6","title":"NGK Spark Plugs Porsche 911 996 3.4 Boxster 986 2.7 3.2 x6","description":"\u003cp\u003e\u003cstrong\u003eNGK Spark Plugs Porsche 911 996 3.4 Boxster 986 2.7 3.2 x6\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eNGK Spark Plugs are one of the leading automotive and technical ceramic suppliers in the world.\u003cbr\u003e\nFounded in 1936, NGK Spark Plugs have always developed ceramics at the core of its business.\u003c\/p\u003e\n\n\u003cp\u003eOver the years, the company has successfully developed and applied its expertise to create other products of significant value.\u003c\/p\u003e\n\n\u003cp\u003eWith over 80 years of experience, NGK Spark Plugs is a global market leader of spark plugs, glow plugs, lambda sensors as well as other ignition parts and vehicle electronics.\u003c\/p\u003e\n\n\u003cp\u003eHeadquartered in Nagoya, Japan, NGK Spark Plugs have production facilities and sales organisations all around the world with more than 14,500 employees worldwide.\u003c\/p\u003e\n\n\u003cp\u003eNGK Spark Plugs are present on all continents and have 41 group companies, 24 production plants, and five technical centres.\u003c\/p\u003e\n\n\u003cp\u003eThis worldwide presence makes NGK Spark Plugs a global leader and first choice for spark plugs.\u003c\/p\u003e\n\n\u003cp\u003e \u003c\/p\u003e","brand":"NGK","offers":[{"title":"Platinum (OEM)","offer_id":47253194277160,"sku":"NGK-BKR6EQUP-6","price":74.79,"currency_code":"GBP","in_stock":true},{"title":"Iridium IX (Upgraded)","offer_id":47253194309928,"sku":"NGK-BKR6EIX-6","price":73.11,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/5767\/7352\/files\/ngk-spark-plugs-porsche-911-996-3-4-boxster-986-2-7-x6-coilpacks-leads-964.webp?v=1744976399"},{"product_id":"ngk-spark-plugs-porsche-911-996-3-6-turbo-x6","title":"NGK Spark Plugs Porsche 911 996 3.6 Turbo x6","description":"\u003cp\u003e\u003cstrong\u003eNGK Spark Plugs Porsche 911 996 3.6 Turbo x6\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eNGK Spark Plugs are one of the leading automotive and technical ceramic suppliers in the world.\u003cbr\u003e\nFounded in 1936, NGK Spark Plugs have always developed ceramics at the core of its business.\u003c\/p\u003e\n\n\u003cp\u003eOver the years, the company has successfully developed and applied its expertise to create other products of significant value.\u003c\/p\u003e\n\n\u003cp\u003eWith over 80 years of experience, NGK Spark Plugs is a global market leader of spark plugs, glow plugs, lambda sensors as well as other ignition parts and vehicle electronics.\u003c\/p\u003e\n\n\u003cp\u003eHeadquartered in Nagoya, Japan, NGK Spark Plugs have production facilities and sales organisations all around the world with more than 14,500 employees worldwide.\u003c\/p\u003e\n\n\u003cp\u003eNGK Spark Plugs are present on all continents and have 41 group companies, 24 production plants, and five technical centres.\u003c\/p\u003e\n\n\u003cp\u003eThis worldwide presence makes NGK Spark Plugs a global leader and first choice for spark plugs.\u003c\/p\u003e\n\n\u003cp\u003e \u003c\/p\u003e","brand":"NGK","offers":[{"title":"Nickel (OEM)","offer_id":47253194408232,"sku":"NGK-BKR7EKC-6","price":50.23,"currency_code":"GBP","in_stock":true},{"title":"Iridium (Upgraded)","offer_id":47253194441000,"sku":"NGK-BKR7EIX-6","price":73.11,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/5767\/7352\/files\/ngk-spark-plugs-porsche-911-996-3-6-turbo-x6-coilpacks-leads-853.webp?v=1744977307"},{"product_id":"ngk-spark-plugs-porsche-911-996-997-3-6-3-8-boxster-cayman-987-2-7-2-9-3-4-x6","title":"NGK Standard Spark Plugs Porsche 911 996 997 3.6 3.8 Boxster Cayman 987 2.7 2.9 3.4 x6","description":"\u003cp\u003e\u003cstrong\u003eNGK Spark Plugs Porsche 911 996 997 3.6 3.8 Boxster Cayman 987 2.7 2.9 3.4 x6\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eNGK Spark Plugs are one of the leading automotive and technical ceramic suppliers in the world.\u003cbr\u003e\nFounded in 1936, NGK Spark Plugs have always developed ceramics at the core of its business.\u003c\/p\u003e\n\n\u003cp\u003eOver the years, the company has successfully developed and applied its expertise to create other products of significant value.\u003c\/p\u003e\n\n\u003cp\u003eWith over 80 years of experience, NGK Spark Plugs is a global market leader of spark plugs, glow plugs, lambda sensors as well as other ignition parts and vehicle electronics.\u003c\/p\u003e\n\n\u003cp\u003eHeadquartered in Nagoya, Japan, NGK Spark Plugs have production facilities and sales organisations all around the world with more than 14,500 employees worldwide.\u003c\/p\u003e\n\n\u003cp\u003eNGK Spark Plugs are present on all continents and have 41 group companies, 24 production plants, and five technical centres.\u003c\/p\u003e\n\n\u003cp\u003eThis worldwide presence makes NGK Spark Plugs a global leader and first choice for spark plugs.\u003c\/p\u003e\n\n\u003cp\u003e \u003c\/p\u003e","brand":"NGK","offers":[{"title":"Default Title","offer_id":47253194703144,"sku":"NGK-BKR7EQUP-6","price":65.16,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/5767\/7352\/files\/ngk-standard-spark-plugs-porsche-911-996-997-3-6-8-boxster-cayman-987-2-7-9-4-x6-coilpacks-leads-791.webp?v=1749494888"},{"product_id":"hel-braided-brake-lines-porsche-996","title":"HEL Braided Brake Lines Porsche 996","description":"\u003cp\u003e\u003cstrong\u003eIMAGES ARE FOR ILLUSTRATIVE PURPOSES ONLY\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eHEL Brake Lines eliminate the risk of unreliable brakes, giving you premium quality brake performance at the same time. Incredible value for money for premium quality braided brake lines. These are braided brake lines you can 100% trust in any type of car. Your braking will feel smoother and stronger. That ‘spongy’ brake feeling will be eliminated, making your brakes crisp and responsive. \u003cbr\u003e\u003cbr\u003e- The highest quality, 100% stainless steel, non-corroding braided brake lines.\u003cbr\u003e- Covered With A Lifetime Warranty As Standard.\u003cbr\u003e- FMVSS-106, ADR, LTSA, DOT and TUV approved.\u003cbr\u003e- So reliable that they’re used in many high performance, racing and custom cars.\u003cbr\u003e- Coated in a wipe-clean PVC cover.\u003c\/p\u003e","brand":"HEL","offers":[{"title":"Default Title","offer_id":47264184533288,"sku":"HEL-POR-4-019","price":119.6,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/5767\/7352\/files\/hel-braided-brake-lines-porsche-996-520.webp?v=1745020785"},{"product_id":"pci-racing-adjustable-seat-mount-sbt-on-base-porsche-911-99-fits-left-right","title":"PCI Racing Adjustable Seat Mount SBT On Base Porsche 911 99 Fits Left\/Right","description":"\u003cp\u003eThe PCI Racing Adjustable Seat Mount (LEFT\/RIGHT) SBT On Base for the Porsche 911 '99 is a versatile automotive accessory designed to enhance the driving experience and ergonomics of your vehicle. Here's a comprehensive description of this product:\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eVehicle Compatibility\u003c\/strong\u003e: This seat mount is expertly engineered to seamlessly integrate with the Porsche 911 model year 1999, ensuring a perfect fit and compatibility with your vehicle's interior. What makes this product special is that it can be installed on both the driver's side  and the passenger's side , offering flexibility for customization.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eAdjustability\u003c\/strong\u003e: The PCI Racing Adjustable Seat Mount provides a wide range of adjustability options, including height, angle, and distance from the dashboard. This allows you to fine-tune your seating position to your exact preferences, providing a personalized and comfortable driving experience for both the driver and passenger.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eHigh-Quality Construction\u003c\/strong\u003e: Crafted from top-quality materials, this seat mount is known for its durability and safety. It is designed to withstand the rigorous demands of high-performance driving, ensuring that occupants remain securely in place.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eEnhanced Comfort for Driver and Passenger\u003c\/strong\u003e: The PCI Racing Adjustable Seat Mount (LEFT\/RIGHT) offers improved, more comfortable seating positions for both the driver and the passenger. This enhanced ergonomics and support contribute to a more enjoyable and controlled ride for everyone in the vehicle.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eEasy Installation\u003c\/strong\u003e: The thoughtful design of this seat mount ensures a straightforward installation process, making it a practical and convenient upgrade for your Porsche 911 '99.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e","brand":"Pro Car Innovations","offers":[{"title":"Default Title","offer_id":47268347642152,"sku":"PCI-SM-911-1-A1","price":310.37,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/5767\/7352\/files\/pci-racing-adjustable-seat-mount-sbt-on-base-porsche-911-99-fits-left-right-seats-rails-mounts-134.webp?v=1745086480"},{"product_id":"pci-racing-adjustable-seat-mount-sbt-on-wide-base-porsche-911-99-fits-left-right","title":"PCI Racing Adjustable Seat Mount SBT On Wide Base Porsche 911 99 Fits Left\/Right","description":"\u003cp\u003eThe PCI Racing Adjustable Seat Mount (LEFT\/RIGHT) SBT On Wide Base for the Porsche 911 '99 is a versatile automotive accessory designed to enhance the driving experience and ergonomics of your vehicle. Here's a comprehensive description of this product:\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eVehicle Compatibility\u003c\/strong\u003e: This seat mount is expertly engineered to seamlessly integrate with the Porsche 911 model year 1999, ensuring a perfect fit and compatibility with your vehicle's interior. What makes this product special is that it can be installed on both the driver's side  and the passenger's side , offering flexibility for customization.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eWide Base\u003c\/strong\u003e: The wide base design enhances stability and support for the seats. This feature ensures that occupants remain securely in place, especially during high-performance driving.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eAdjustability\u003c\/strong\u003e: The PCI Racing Adjustable Seat Mount provides a wide range of adjustability options, including height, angle, and distance from the dashboard. This allows you to fine-tune your seating position to your exact preferences, providing a personalized and comfortable driving experience for both the driver and passenger.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eHigh-Quality Construction\u003c\/strong\u003e: Crafted from top-quality materials, this seat mount is known for its durability and safety. It is designed to withstand the rigorous demands of high-performance driving, ensuring that occupants remain securely in place.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eEnhanced Comfort for Driver and Passenger\u003c\/strong\u003e: The PCI Racing Adjustable Seat Mount (LEFT\/RIGHT) SBT On Wide Base offers improved, more comfortable seating positions for both the driver and the passenger. This enhanced ergonomics and support contribute to a more enjoyable and controlled ride for everyone in the vehicle.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eEasy Installation\u003c\/strong\u003e: The thoughtful design of this seat mount ensures a straightforward installation process, making it a practical and convenient upgrade for your Porsche 911 '99.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e","brand":"Pro Car Innovations","offers":[{"title":"Default Title","offer_id":47268347740456,"sku":"PCI-SM-911-1-S1","price":310.37,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/5767\/7352\/files\/pci-racing-adjustable-seat-mount-sbt-on-wide-base-porsche-911-99-fits-left-right-seats-rails-mounts-213.webp?v=1716411319"},{"product_id":"pci-racing-slider-seat-mount-sbt-on-base-porsche-911-99-fits-left-right","title":"PCI Racing Slider Seat Mount SBT On Base Porsche 911 99 Fits Left\/Right","description":"\u003cp\u003eThe PCI Racing Slider Seat Mount (LEFT\/RIGHT) SBT On Base for the Porsche 911 '99 is a versatile automotive accessory designed to enhance the driving experience and ergonomics of your vehicle. Here's a comprehensive description of this product:\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eVehicle Compatibility\u003c\/strong\u003e: This seat mount is expertly engineered to seamlessly integrate with the Porsche 911 model year 1999, ensuring a perfect fit and compatibility with your vehicle's interior. What makes this product special is that it can be installed on both the driver's side  and the passenger's side , offering flexibility for customization.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eSlider Mechanism\u003c\/strong\u003e: The built-in slider mechanism provides a range of adjustability, allowing you to fine-tune your seating position, including height, angle, and distance from the dashboard. This feature enables a personalized and comfortable driving experience for both the driver and passenger.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eHigh-Quality Construction\u003c\/strong\u003e: Crafted from top-quality materials, this seat mount is known for its durability and safety. It's designed to withstand the rigorous demands of high-performance driving, ensuring that occupants remain securely in place.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eEnhanced Comfort for Driver and Passenger\u003c\/strong\u003e: The PCI Racing Slider Seat Mount (LEFT\/RIGHT) SBT On Base offers improved, more comfortable seating positions for both the driver and the passenger. The enhanced ergonomics and support contribute to a more enjoyable and controlled ride for everyone in the vehicle.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eEasy Installation\u003c\/strong\u003e: The thoughtful design of this seat mount ensures a straightforward installation process, making it a practical and convenient upgrade for your Porsche 911 '99.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003eIn summary, the PCI Racing Slider Seat Mount (LEFT\/RIGHT) SBT On Base for the Porsche 911 '99 is a premium, versatile accessory designed to offer enhanced adjustability and improved comfort for both the driver and passenger. This product caters to those who seek to optimize their driving experience and provide personalized seating comfort for themselves and their passengers.\u003c\/p\u003e","brand":"Pro Car Innovations","offers":[{"title":"Default Title","offer_id":47268347773224,"sku":"PCI-SM-911-2-S2","price":310.37,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/5767\/7352\/files\/pci-racing-slider-seat-mount-sbt-on-base-porsche-911-99-fits-left-right-seats-rails-mounts-594.webp?v=1745087452"},{"product_id":"turbosmart-iwg75-porsche-996-911-gt2-black-24psi","title":"TurboSmart IWG75 Porsche 996 911 GT2 Black 24PSI","description":"Turbosmart Upgraded Wastegate Actuators have been developed to provide the maximum possible boost response for your factory frame turbocharger. The Turbosmart IWG75 Series of upgraded Actuators benefit from an increased 'Working Ratio' over the factory equipment resulting in improved boost response throughout the RPM range.\u003cbr\u003e\u003cbr\u003eThis Improved 'working ratio' is achieved through an increase to the effective surface area of the diaphragm \u0026amp; revisions to the actual springs fitted, resulting in greater leverage of the forces the actuator is working against (boost and backpressure) while still being super-responsive. \u003cbr\u003e\u003cbr\u003eUpgrading with the same base pressure as the factory, you can expect a broader boost \u0026amp; torque curve through peak boost being achieved earlier in the RPM and being held longer into higher RPM. These improvements can be amplified with higher base pressures, however, tuning \u0026amp; recalibration is likely required.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eAvailable in\u003c\/b\u003e\u003cbr\u003e7 psi  \/ 0.5 BAR: TS-0624-2072\u003cbr\u003e24psi \/ 1.7 BAR: TS-0624-2242\u003cbr\u003e\u003cbr\u003e\u003cb\u003eFeatures\u003c\/b\u003e\u003cbr\u003eProprietary Silicon Nomex Diaphragm\u003cbr\u003eChoice of Springs from 3psi to 26psi (Optional)\u003cbr\u003eHigh-Grade Billet Aluminum Construction\u003cbr\u003eStainless Steel Rods and Clevis\u003cbr\u003eTurbosmart Unique Locking Collar System\u003cbr\u003e\u003cbr\u003e\u003cb\u003eNotes\u003c\/b\u003e\u003cbr\u003eThe 7psi Version is a direct replacement for the factory item. All other versions will require tuning\/calibration of your engine's ECU.","brand":"Turbosmart","offers":[{"title":"Default Title","offer_id":47326218748200,"sku":"TS-0624-2242","price":497.94,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/5767\/7352\/files\/turbosmart-iwg75-porsche-996-911-gt2-black-24psi-wastegates-970.webp?v=1745126028"},{"product_id":"turbosmart-iwg75-porsche-996-911-turbo-black-24psi","title":"TurboSmart IWG75 Porsche 996 911 Turbo Black 24PSI","description":"Turbosmart Upgraded Wastegate Actuators have been developed to provide the maximum possible boost response for your factory frame turbocharger. The Turbosmart IWG75 Series of upgraded Actuators benefit from an increased 'Working Ratio' over the factory equipment resulting in improved boost response throughout the RPM range.\u003cbr\u003e\u003cbr\u003eThis Improved 'working ratio' is achieved through an increase to the effective surface area of the diaphragm \u0026amp; revisions to the actual springs fitted, resulting in greater leverage of the forces the actuator is working against (boost and backpressure) while still being super-responsive. \u003cbr\u003e\u003cbr\u003eUpgrading with the same base pressure as the factory, you can expect a broader boost \u0026amp; torque curve through peak boost being achieved earlier in the RPM and being held longer into higher RPM. These improvements can be amplified with higher base pressures, however, tuning \u0026amp; recalibration is likely required.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eAvailable in\u003c\/b\u003e\u003cbr\u003e7 psi  \/ 0.5 BAR: TS-0624-3072\u003cbr\u003e23psi \/ 1.7 BAR: TS-0624-3242\u003cbr\u003e\u003cbr\u003e\u003cb\u003eFeatures\u003c\/b\u003e\u003cbr\u003eProprietary Silicon Nomex Diaphragm\u003cbr\u003eChoice of Springs from 3psi to 26psi (Optional)\u003cbr\u003eHigh-Grade Billet Aluminum Construction\u003cbr\u003eStainless Steel Rods and Clevis\u003cbr\u003eTurbosmart Unique Locking Collar System\u003cbr\u003e\u003cbr\u003e\u003cb\u003eNotes\u003c\/b\u003e\u003cbr\u003eThe 7psi Version is a direct replacement for the factory item. All other versions will require tuning\/calibration of your engine's ECU.","brand":"Turbosmart","offers":[{"title":"Default Title","offer_id":47326218780968,"sku":"TS-0624-3242","price":497.94,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/5767\/7352\/files\/turbosmart-iwg75-porsche-996-911-turbo-black-24psi-wastegates-724.webp?v=1745126922"},{"product_id":"syvecs-s7plus-plug-and-play-kit-porsche-911-996","title":"Syvecs S7Plus Plug and Play Kit Porsche 911 (996)","description":"\u003cp\u003eThe Syvecs Porsche 996 Plug N Play Kit ushers in a new era of Engine Management (ECU) control for the Porsche 996 platform, delivering comprehensive command over the Engine Management (ECU) system and gearbox torque control on all models, including Tiptronics and GT variants. Notably, this kit stands as the world's first standalone management solution for this platform.\u003c\/p\u003e\n\u003cp\u003eThe process is streamlined: merely plug in the kit, and a world of advanced control becomes accessible, encompassing a wide range of features and capabilities:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eLive Tuning:\u003c\/strong\u003e Dynamically adjust every parameter of the engine's calibration in real-time, even signals sent to the Transmission Control Module (TCM) and Four-Wheel Drive system.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTiptronic Enhancements:\u003c\/strong\u003e Experience enhanced Tiptronic shift speeds with superior torque reduction through fuel cut and retard strategies, outperforming stock ECU throttle angle adjustments.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdjustable Shift RPM:\u003c\/strong\u003e Personalize shift RPM with speed lockout functionality, specifically designed for Tiptronic-equipped vehicles.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMap Selection:\u003c\/strong\u003e Choose desired engine maps, boost levels, traction settings, and launch control modes seamlessly using OEM steering wheel buttons or an optional external 12-position switch. Boost level is visually indicated on the display (Refer to Media).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlex Fuel Control:\u003c\/strong\u003e Effortlessly adapt to varying ethanol content with flexible fuel control features.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eImmobiliser and PSM Integration:\u003c\/strong\u003e Establish seamless communication with the Immobilizer and Porsche Stability Management (PSM) modules, mirroring OEM behavior.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIndividual Cylinder Knock Control:\u003c\/strong\u003e Tailor knock control for each cylinder, adjusting frequency, listening windows, and gains. Capable of triggering full cylinder shutdown in severe knock conditions.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLaunch Control and Traction Control:\u003c\/strong\u003e Enjoy fully adjustable launch control with anti-lag strategies, a selection of 12 live switchable maps, and traction control fine-tuned based on lateral G-force.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVariable Valve Timing and Lift Control:\u003c\/strong\u003e Harness full control over Variable Valve Timing (VVT) and lift mechanisms.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eClosed Loop Dual Lambda Control:\u003c\/strong\u003e Utilize OEM lambda sensors for precise closed-loop lambda control.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eClosed Loop Boost Control:\u003c\/strong\u003e Achieve finely tuned boost control, including launch level adjustments and trims for various parameters.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExhaust Gas Temperature Monitoring:\u003c\/strong\u003e Monitor and regulate exhaust gas temperatures for optimal performance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBuilt-in Data Logging:\u003c\/strong\u003e Capture up to 8 hours of data with market-leading analysis software at data rates up to 1000Hz.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRolling Antilag and Pit Lane Limiter Strategies:\u003c\/strong\u003e Optimize boost build-up during motion and implement pit lane limiter strategies for added control.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAntitheft and Valet Modes:\u003c\/strong\u003e Implement security measures for peace of mind.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGlobal Connectivity:\u003c\/strong\u003e Rapid RJ45 Ethernet port connection enables live tuning from anywhere globally or remotely through wireless units.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEngine Safety Trips:\u003c\/strong\u003e Configure critical safety parameters, such as oil temperature, oil pressure, water temperature, and crankcase pressure.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFuel Pump Control:\u003c\/strong\u003e Manage main and sub fuel pumps, monitor relative fuel pressure, and apply limiting during fuel pressure drops during boost.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePedal to Throttle Angle Mapping:\u003c\/strong\u003e Adjust pedal to throttle mapping using 4 maps with multipliers, adjustable via steering wheel buttons.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTorque Management:\u003c\/strong\u003e Fine-tune torque levels and demand levels sent to 4WD unit and TCM ECU.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShift Torque Reductions:\u003c\/strong\u003e Essential for high-power Tiptronic variants, adjust torque reduction levels during shifts to prevent component damage.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTorque Ramp Adjustment:\u003c\/strong\u003e Customize post-launch torque ramp settings.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThrottle Blip Control:\u003c\/strong\u003e Match throttle blip requests to your torque band, especially valuable for oversized turbo setups.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh-Resolution Map Sensor Compatibility:\u003c\/strong\u003e Support for up to 7-bar map sensors.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdvanced Injector Control:\u003c\/strong\u003e Manage high or low impedance injectors, even control up to 12 injectors for high-powered setups requiring staged injection.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInjector Calibration:\u003c\/strong\u003e Precisely set injector dead times and end angles for accurate injection point calibration.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExternal Sensor Integration:\u003c\/strong\u003e Seamlessly integrate various external sensors to monitor and trigger safety responses.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDBW Throttle Body Compatibility:\u003c\/strong\u003e Compatible with different DBW throttle body sizes, such as the Chevrolet LS7.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNitrous Control:\u003c\/strong\u003e Manage Wet and Dry nitrous systems, controlling solenoids and n20 heaters via pressure monitoring.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExternal Feature Control:\u003c\/strong\u003e Manage external vehicle features based on sensor inputs, including adjustable rear wing or exhaust control valves.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDash Integration:\u003c\/strong\u003e Connect with race series dashboards, including Syvecs Edition SDM displays.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLive Data Monitoring:\u003c\/strong\u003e Gain real-time insights through the built-in scope functionality, offering live input views up to 1000Hz.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAnd Much More:\u003c\/strong\u003e Discover a plethora of additional features and possibilities to elevate your Porsche 996 experience.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eElevate your Porsche 996 experience with the Syvecs Porsche 996 Plug N Play Kit, marking a new dawn of control, adaptability, and performance on the Porsche 996 platform.\u003c\/p\u003e","brand":"Syvecs","offers":[{"title":"Default Title","offer_id":47406610383144,"sku":"S7Plus-996DF","price":3840.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/5767\/7352\/files\/syvecs-s7plus-plug-and-play-kit-porsche-911-996-engine-management-ecu-847.webp?v=1745243762"},{"product_id":"ohlins-road-track-coilovers-dfv-1-way-porsche-911-996-carerra-2-98-06-tuv-approved","title":"Ohlins Road \u0026 Track Coilovers DFV (1-way) Porsche 911 996 Carerra 2 98-06 TUV Approved","description":"\u003cp\u003eThis kit comes complete with springs.\u003c\/p\u003e\u003cdiv\u003eExperience the pinnacle of performance without compromising comfort in your daily driving. The Öhlins Road \u0026amp; Track range offers exceptional traction and control on track days while retaining a refined ride quality for road use. Our Road \u0026amp; Track products are a versatile option for drivers who want it all, equally as popular among manufacturers making the ultimate track day car as they are with aftermarket customers aiming to further upgrade chassis performance. Choose between full suspension kits or individual shock absorbers and struts, depending on the application.\u003c\/div\u003e\n\u003cp\u003eThe Öhlins Road \u0026amp; Track shock absorber kit for the Porsche 911 (996) Carrera 2 (1998-2006) brings the excitement of racing to your own car, without sacrificing comfort and safety when commuting to work.\u003c\/p\u003e\n\u003cp\u003eOur unique Dual Flow Valve (DFV) technology allows you to quickly adjust the damper stiffness. When arriving to the racetrack, simply turn the golden knob clockwise to set the damper in race mode. This action changes all four areas of the damper: low- and high-speed compression and rebound damping.\u003c\/p\u003e\n\u003cp\u003eWith Öhlins’ Road \u0026amp; Track coilovers, you’ll experience blistering response times, improved bump absorption, and a massive amount of traction to increase the safety of the car when you’re pushing it to the limit. The car will be easier to balance on the edge of what the tires can handle before losing grip. You will also be faster and more agile on track. The internal DFV components react quickly to major and minor road imperfections, keeping you in control of the car and in contact with the track surface.\u003c\/p\u003e\n\u003cp\u003eWhen driving to and from the track, set the dampers back into road mode for a more relaxed and comfortable drive, experiencing more grip and quicker response time than ever before.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDFV technology (Dual Flow Valve)\u003c\/li\u003e\n\u003cli\u003eIndividual height adjustment\u003c\/li\u003e\n\u003cli\u003eRebuildable\u003c\/li\u003e\n\u003cli\u003eCorrosion salt spray tested (ISO 9227)\u003c\/li\u003e\n\u003cli\u003e2-year warranty\u003c\/li\u003e\n\u003cli\u003eMcPherson strut, upside down\u003c\/li\u003e\n\u003cli\u003eCompression and rebound damping with one adjuster\u003c\/li\u003e\n\u003cli\u003eSpring preload adjuster\u003c\/li\u003e\n\u003cli\u003eSeparate ride height adjustment\u003c\/li\u003e\n\u003cli\u003eApproximately 20 mm lower than standard with Recommendeded setup\u003c\/li\u003e\n\u003cli\u003eSpring rate 60 N\/mm\u003c\/li\u003e\n\u003cli\u003eUse with original top mounts\u003c\/li\u003e\n\u003cli\u003eConventional shock absorber\u003c\/li\u003e\n\u003cli\u003eCompression and rebound damping with one adjuster\u003c\/li\u003e\n\u003cli\u003eSpring preload adjuster\u003c\/li\u003e\n\u003cli\u003eSeparate ride height adjustment\u003c\/li\u003e\n\u003cli\u003eApproximately 20 mm lower than standard with Recommendeded setup\u003c\/li\u003e\n\u003cli\u003eSpring rate 120 N\/mm\u003c\/li\u003e\n\u003cli\u003eUse with original top mounts\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Ohlins","offers":[{"title":"Default Title","offer_id":47407376400680,"sku":"OHLN-POZ-MI00S1","price":3335.2,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/5767\/7352\/files\/ohlins-road-track-coilovers-dfv-1-way-porsche-911-996-carerra-2-98-06-tuv-approved-878.webp?v=1745255948"},{"product_id":"ohlins-road-track-coilovers-dfv-1-way-porsche-911-996-carrera-4-s-turbo-s-99-05-tuv-approved","title":"Ohlins Road \u0026 Track Coilovers DFV (1-way) Porsche 911 996 Carrera 4\/S Turbo\/S 99-05 TUV Approved","description":"\u003cp\u003eThis kit comes complete with springs.\u003c\/p\u003e\u003cdiv\u003eExperience the pinnacle of performance without compromising comfort in your daily driving. The Öhlins Road \u0026amp; Track range offers exceptional traction and control on track days while retaining a refined ride quality for road use. Our Road \u0026amp; Track products are a versatile option for drivers who want it all, equally as popular among manufacturers making the ultimate track day car as they are with aftermarket customers aiming to further upgrade chassis performance. Choose between full suspension kits or individual shock absorbers and struts, depending on the application.\u003c\/div\u003e\n\u003cp\u003eThe Öhlins Road \u0026amp; Track shock absorber kit for the Porsche 911 (996) Carrera 4\/4S (1999–2005) and 911 (996) Turbo\/S (2001–2005) brings the excitement of racing to your own car, without sacrificing comfort and safety when commuting to work.\u003c\/p\u003e\n\u003cp\u003eOur unique Dual Flow Valve (DFV) technology allows you to quickly adjust the damper stiffness. When arriving to the racetrack, simply turn the golden knob clockwise to set the damper in race mode. This action changes all four areas of the damper: low- and high-speed compression and rebound damping.\u003c\/p\u003e\n\u003cp\u003eWith Öhlins’ Road \u0026amp; Track coilovers, you’ll experience blistering response times, improved bump absorption, and a massive amount of traction to increase the safety of the car when you’re pushing it to the limit. Your car will be easier to balance on the edge of what the tires can handle before losing grip. You will also be faster and more agile on track. The internal DFV components react quickly to major and minor road imperfections, keeping you in control of the car and in contact with the track surface.\u003c\/p\u003e\n\u003cp\u003eWhen driving to and from the track, set the dampers back into road mode for a more relaxed and comfortable drive, experiencing more grip and quicker response time than ever before.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDFV technology (Dual Flow Valve)\u003c\/li\u003e\n\u003cli\u003eIndividual height adjustment\u003c\/li\u003e\n\u003cli\u003eRebuildable\u003c\/li\u003e\n\u003cli\u003eCorrosion salt spray tested (ISO 9227)\u003c\/li\u003e\n\u003cli\u003e2-year warranty\u003c\/li\u003e\n\u003cli\u003eMcPherson strut, upside down\u003c\/li\u003e\n\u003cli\u003eCompression and rebound damping with one adjuster\u003c\/li\u003e\n\u003cli\u003eSpring preload adjuster\u003c\/li\u003e\n\u003cli\u003eApproximately 20 mm lower than standard with Recommendeded setup\u003c\/li\u003e\n\u003cli\u003eSpring rate 70 N\/mm\u003c\/li\u003e\n\u003cli\u003eAdjustable aluminum top mounts\u003c\/li\u003e\n\u003cli\u003eConventional shock absorber\u003c\/li\u003e\n\u003cli\u003eCompression and rebound damping with one adjuster\u003c\/li\u003e\n\u003cli\u003eSpring preload adjuster\u003c\/li\u003e\n\u003cli\u003eApproximately 20 mm lower than standard with Recommendeded setup\u003c\/li\u003e\n\u003cli\u003eSpring rate 120 N\/mm\u003c\/li\u003e\n\u003cli\u003eUse with original top mounts\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Ohlins","offers":[{"title":"Default Title","offer_id":47407376433448,"sku":"OHLN-POZ-MW00S1","price":4680.41,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/5767\/7352\/files\/ohlins-road-track-coilovers-dfv-1-way-porsche-911-996-carrera-4-s-turbo-99-05-tuv-approved-514.webp?v=1745253381"},{"product_id":"kap-industries-fire-extinguisher-bracket-porsche-911-981-991-993-996-997","title":"Kap Industries Fire Extinguisher Bracket PORSCHE 911 981 991 993 996 997","description":"\u003cp\u003e\u003cstrong\u003ePlease check the More Info section for LHD\/RHD compatibility, as well as material thickness information!\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003c\/p\u003e\n\u003cp\u003eSometimes the simplest things can be lifesavers. The Kap Industries fire extinguisher bracket is designed to keep your fire suppression at arms length should the worst happen, and features a quick release so you can grab it with ease should you need it. Fires aren't exclusive to motorsport, whether its a track car or even a daily, having that extra bit of protection never hurt anyone\u003c\/p\u003e\n\u003cp\u003e\u003c\/p\u003e\n\u003cp\u003eThese brackets are super simple to fit requiring no drilling or cutting; simply unbolt the front mounts of your passenger seat, slip the bracket in-between the seat and the holes, then bolt the seat back down. Included with these are all the hardware required to fit an extinguisher.\u003c\/p\u003e\n\u003cp\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eUK CUSTOMERS\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eTo save yourself buying an extinguisher, you can choose to include a Fire Suppression Shop extinguisher. These are fully compliant to British Standards (BS 5306-3:2017). Unfortunately this option is only available to \u003cstrong\u003eUK customers\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBolts are supplied with all brackets to attach an extinguisher cage but a retaining strap is only included when the bracket is purchased WITH a fire extinguisher.\u003c\/strong\u003e\u003c\/p\u003e","brand":"Kap Industries","offers":[{"title":"Without Extinguisher","offer_id":47432306557224,"sku":"KAP-PO-001","price":35.0,"currency_code":"GBP","in_stock":true},{"title":"With Extinguisher (UK ONLY)","offer_id":47432306589992,"sku":"KAP-PO-001-EXT","price":70.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/5767\/7352\/files\/kap-industries-fire-extinguisher-bracket-porsche-911-981-991-993-996-997-without-extinguishers-879.webp?v=1751381427"},{"product_id":"pbs-prorace-front-brake-pads-porsche-911-996-gt2-05","title":"PBS ProRace Front Brake Pads Porsche 911 996 GT2 05+","description":"\u003cp\u003eThe ProRace compound is a ceramic graphite material that has great initial bite, excellent control and feel with powerful stopping power 0.36 to 0.58mu this compound is used in many race series with great results including race wins and overall championships it is also the compound of choice for many track day users.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWorking temp 0-800c\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0267\/1178\/5543\/files\/PBS-02_480x480.png?v=1635951534\" alt=\"\"\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cdiv\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0267\/1178\/5543\/files\/prorace-graph_480x480.jpg?v=1589193198\" alt=\"\"\u003e\u003c\/div\u003e","brand":"PBS","offers":[{"title":"Default Title","offer_id":47510162047272,"sku":"8554PR","price":202.22,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/5767\/7352\/files\/pbs-prorace-front-brake-pads-porsche-911-996-gt2-05-245.webp?v=1716713353"},{"product_id":"pagid-brake-pads-porsche-996-3-4-c-3-6-97-05","title":"Pagid Brake Pads Porsche 996 3.4 C \u0026 3.6 97-05","description":"\u003cp\u003eThe brake products are designed to produce the highest possible performance levels over a wide range of operating conditions, and are available in many different material formulations. \u003c\/p\u003e\n\n\u003cp\u003eThey fit most popular racing and high performance calipers and also may be fitted as an upgrade to many standard calipers for high performance cars.\u003c\/p\u003e","brand":"Pagid","offers":[{"title":"Front \/ RSL 19","offer_id":47650085142824,"sku":"E240519010","price":345.3,"currency_code":"GBP","in_stock":true},{"title":"Front \/ RSL 29","offer_id":47650085175592,"sku":"E240529010","price":330.49,"currency_code":"GBP","in_stock":true},{"title":"Front \/ RS 42","offer_id":47650085208360,"sku":"E240542010","price":278.12,"currency_code":"GBP","in_stock":true},{"title":"Front \/ RS 44","offer_id":47650085241128,"sku":"E240544010","price":278.15,"currency_code":"GBP","in_stock":false},{"title":"Front \/ RSC 1","offer_id":47650085273896,"sku":"S2405C01001","price":589.08,"currency_code":"GBP","in_stock":true},{"title":"Front \/ RSL 1","offer_id":47650085339432,"sku":"S2405L01001","price":411.29,"currency_code":"GBP","in_stock":true},{"title":"Front \/ RST 3","offer_id":47650085372200,"sku":"S2405T03001","price":290.57,"currency_code":"GBP","in_stock":true},{"title":"Rear \/ RS 14","offer_id":47650085404968,"sku":"E240614010","price":298.01,"currency_code":"GBP","in_stock":false},{"title":"Rear \/ RSL 19","offer_id":47650085437736,"sku":"E240619010","price":335.39,"currency_code":"GBP","in_stock":true},{"title":"Rear \/ RSL 29","offer_id":47650085470504,"sku":"E240629010","price":319.96,"currency_code":"GBP","in_stock":true},{"title":"Rear \/ RS 42","offer_id":47650085503272,"sku":"E240642010","price":266.78,"currency_code":"GBP","in_stock":true},{"title":"Rear \/ RS 44","offer_id":47650085536040,"sku":"E240644010","price":269.41,"currency_code":"GBP","in_stock":false},{"title":"Rear \/ RSL 1","offer_id":47650085568808,"sku":"S2406L01001","price":401.39,"currency_code":"GBP","in_stock":true},{"title":"Rear \/ RST 3","offer_id":47650085601576,"sku":"S2406T03001","price":295.57,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/5767\/7352\/files\/pagid-brake-pads-porsche-996-3-4-c-6-97-05-front-rs-42-146.webp?v=1741789267"},{"product_id":"pagid-brake-pads-porsche-996-3-4-c-cup-97-98","title":"Pagid Brake Pads Porsche 996 3.4 C Cup 97-98","description":"\u003cp\u003eThe brake products are designed to produce the highest possible performance levels over a wide range of operating conditions, and are available in many different material formulations. \u003c\/p\u003e\n\n\u003cp\u003eThey fit most popular racing and high performance calipers and also may be fitted as an upgrade to many standard calipers for high performance cars.\u003c\/p\u003e","brand":"Pagid","offers":[{"title":"Front \/ RSL 29","offer_id":47650085732648,"sku":"E184229010","price":401.39,"currency_code":"GBP","in_stock":true},{"title":"Front \/ RSL 1","offer_id":47650085798184,"sku":"S1842L01001","price":455.33,"currency_code":"GBP","in_stock":true},{"title":"Rear \/ RSL 19","offer_id":47650085863720,"sku":"E240519010","price":345.3,"currency_code":"GBP","in_stock":true},{"title":"Rear \/ RSL 29","offer_id":47650085896488,"sku":"E240529010","price":330.49,"currency_code":"GBP","in_stock":true},{"title":"Rear \/ RS 42","offer_id":47650085929256,"sku":"E240542010","price":278.12,"currency_code":"GBP","in_stock":true},{"title":"Rear \/ RS 44","offer_id":47650085962024,"sku":"E240544010","price":278.15,"currency_code":"GBP","in_stock":false},{"title":"Rear \/ RSC 1","offer_id":47650086027560,"sku":"S2405C01001","price":589.08,"currency_code":"GBP","in_stock":true},{"title":"Rear \/ RSL 1","offer_id":47650086093096,"sku":"S2405L01001","price":411.29,"currency_code":"GBP","in_stock":true},{"title":"Rear \/ RST 3","offer_id":47650086125864,"sku":"S2405T03001","price":290.57,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/5767\/7352\/files\/pagid-brake-pads-porsche-996-3-4-c-cup-97-98-rear-rs-42-332.webp?v=1741788055"},{"product_id":"pagid-brake-pads-porsche-996-3-4-c-cup-99-01","title":"Pagid Brake Pads Porsche 996 3.4 C Cup 99-01","description":"\u003cp\u003eThe brake products are designed to produce the highest possible performance levels over a wide range of operating conditions, and are available in many different material formulations. \u003c\/p\u003e\n\n\u003cp\u003eThey fit most popular racing and high performance calipers and also may be fitted as an upgrade to many standard calipers for high performance cars.\u003c\/p\u003e","brand":"Pagid","offers":[{"title":"Front \/ RSL 19","offer_id":47650086191400,"sku":"E247419010","price":375.02,"currency_code":"GBP","in_stock":false},{"title":"Front \/ RSL 29","offer_id":47650086224168,"sku":"E247429010","price":357.53,"currency_code":"GBP","in_stock":true},{"title":"Front \/ RS 44","offer_id":47650086289704,"sku":"E247444010","price":285.56,"currency_code":"GBP","in_stock":false},{"title":"Front \/ RST 3","offer_id":47650086322472,"sku":"S2474T03001","price":310.4,"currency_code":"GBP","in_stock":true},{"title":"Rear \/ RSL 19","offer_id":47650086388008,"sku":"E240519010","price":345.3,"currency_code":"GBP","in_stock":true},{"title":"Rear \/ RSL 29","offer_id":47650086420776,"sku":"E240529010","price":330.49,"currency_code":"GBP","in_stock":true},{"title":"Rear \/ RS 42","offer_id":47650086453544,"sku":"E240542010","price":278.12,"currency_code":"GBP","in_stock":true},{"title":"Rear \/ RS 44","offer_id":47650086486312,"sku":"E240544010","price":278.15,"currency_code":"GBP","in_stock":false},{"title":"Rear \/ RSC 1","offer_id":47650086519080,"sku":"S2405C01001","price":589.08,"currency_code":"GBP","in_stock":true},{"title":"Rear \/ RSL 1","offer_id":47650086584616,"sku":"S2405L01001","price":411.29,"currency_code":"GBP","in_stock":true},{"title":"Rear \/ RST 3","offer_id":47650086617384,"sku":"S2405T03001","price":290.57,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/5767\/7352\/files\/pagid-brake-pads-porsche-996-3-4-c-cup-99-01-front-rs-44-762.webp?v=1741788559"},{"product_id":"pagid-brake-pads-porsche-996-3-6-c-4s-43588","title":"Pagid Brake Pads Porsche 996 3.6 C 4S 43588","description":"\u003cp\u003eThe brake products are designed to produce the highest possible performance levels over a wide range of operating conditions, and are available in many different material formulations. \u003c\/p\u003e\n\n\u003cp\u003eThey fit most popular racing and high performance calipers and also may be fitted as an upgrade to many standard calipers for high performance cars.\u003c\/p\u003e","brand":"Pagid","offers":[{"title":"Front \/ RSL 19","offer_id":47650086945064,"sku":"E247419010","price":375.02,"currency_code":"GBP","in_stock":false},{"title":"Front \/ RSL 29","offer_id":47650086977832,"sku":"E247429010","price":357.53,"currency_code":"GBP","in_stock":true},{"title":"Front \/ RST 3","offer_id":47650087043368,"sku":"S2474T03001","price":310.4,"currency_code":"GBP","in_stock":true},{"title":"Rear \/ RSL 19","offer_id":47650087108904,"sku":"E240519010","price":345.3,"currency_code":"GBP","in_stock":true},{"title":"Rear \/ RSL 29","offer_id":47650087141672,"sku":"E240529010","price":330.49,"currency_code":"GBP","in_stock":true},{"title":"Rear \/ RS 42","offer_id":47650087174440,"sku":"E240542010","price":278.12,"currency_code":"GBP","in_stock":true},{"title":"Rear \/ RS 44","offer_id":47650087207208,"sku":"E240544010","price":278.15,"currency_code":"GBP","in_stock":false},{"title":"Rear \/ RSC 1","offer_id":47650087239976,"sku":"S2405C01001","price":589.08,"currency_code":"GBP","in_stock":true},{"title":"Rear \/ RSL 1","offer_id":47650087305512,"sku":"S2405L01001","price":411.29,"currency_code":"GBP","in_stock":true},{"title":"Rear \/ RST 3","offer_id":47650087338280,"sku":"S2405T03001","price":290.57,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/5767\/7352\/files\/pagid-brake-pads-porsche-996-3-6-c-4s-43588-rear-rs-42-104.webp?v=1741787944"},{"product_id":"pagid-brake-pads-porsche-996-gt2-43587","title":"Pagid Brake Pads Porsche 996 GT2 43587","description":"\u003cp\u003eThe brake products are designed to produce the highest possible performance levels over a wide range of operating conditions, and are available in many different material formulations. \u003c\/p\u003e\n\n\u003cp\u003eThey fit most popular racing and high performance calipers and also may be fitted as an upgrade to many standard calipers for high performance cars.\u003c\/p\u003e","brand":"Pagid","offers":[{"title":"Front \/ RS 14","offer_id":47650087371048,"sku":"E270714010","price":435.61,"currency_code":"GBP","in_stock":false},{"title":"Front \/ RSL 19","offer_id":47650087403816,"sku":"E270719010","price":477.73,"currency_code":"GBP","in_stock":true},{"title":"Front \/ RSL 29","offer_id":47650087436584,"sku":"E270729010","price":484.58,"currency_code":"GBP","in_stock":true},{"title":"Front \/ RSC 1","offer_id":47650087469352,"sku":"S2707C01001","price":681.05,"currency_code":"GBP","in_stock":true},{"title":"Front \/ RSC 3","offer_id":47650087502120,"sku":"S2707C03001","price":668.47,"currency_code":"GBP","in_stock":false},{"title":"Rear \/ RSL 19","offer_id":47650087567656,"sku":"E240519010","price":345.3,"currency_code":"GBP","in_stock":true},{"title":"Rear \/ RSL 29","offer_id":47650087600424,"sku":"E240529010","price":330.49,"currency_code":"GBP","in_stock":true},{"title":"Rear \/ RS 42","offer_id":47650087633192,"sku":"E240542010","price":278.12,"currency_code":"GBP","in_stock":true},{"title":"Rear \/ RS 44","offer_id":47650087665960,"sku":"E240544010","price":278.15,"currency_code":"GBP","in_stock":false},{"title":"Rear \/ RSC 1","offer_id":47650087698728,"sku":"S2405C01001","price":589.08,"currency_code":"GBP","in_stock":true},{"title":"Rear \/ RSL 1","offer_id":47650087764264,"sku":"S2405L01001","price":411.29,"currency_code":"GBP","in_stock":true},{"title":"Rear \/ RST 3","offer_id":47650087797032,"sku":"S2405T03001","price":290.57,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/5767\/7352\/files\/pagid-brake-pads-porsche-996-gt2-43587-front-rs-14-749.webp?v=1741789343"},{"product_id":"pagid-brake-pads-porsche-996-turbo-99-05","title":"Pagid Brake Pads Porsche 996 Turbo 99-05","description":"\u003cp\u003eThe brake products are designed to produce the highest possible performance levels over a wide range of operating conditions, and are available in many different material formulations. \u003c\/p\u003e\n\n\u003cp\u003eThey fit most popular racing and high performance calipers and also may be fitted as an upgrade to many standard calipers for high performance cars.\u003c\/p\u003e","brand":"Pagid","offers":[{"title":"Front \/ RSL 19","offer_id":47650090156328,"sku":"E247419010","price":375.02,"currency_code":"GBP","in_stock":false},{"title":"Front \/ RSL 29","offer_id":47650090189096,"sku":"E247429010","price":357.53,"currency_code":"GBP","in_stock":true},{"title":"Front \/ RST 3","offer_id":47650090254632,"sku":"S2474T03001","price":310.4,"currency_code":"GBP","in_stock":true},{"title":"Rear \/ RSL 19","offer_id":47650090320168,"sku":"E240519010","price":345.3,"currency_code":"GBP","in_stock":true},{"title":"Rear \/ RSL 29","offer_id":47650090352936,"sku":"E240529010","price":330.49,"currency_code":"GBP","in_stock":true},{"title":"Rear \/ RS 42","offer_id":47650090385704,"sku":"E240542010","price":278.12,"currency_code":"GBP","in_stock":true},{"title":"Rear \/ RS 44","offer_id":47650090418472,"sku":"E240544010","price":278.15,"currency_code":"GBP","in_stock":false},{"title":"Rear \/ RSC 1","offer_id":47650090451240,"sku":"S2405C01001","price":589.08,"currency_code":"GBP","in_stock":true},{"title":"Rear \/ RSL 1","offer_id":47650090516776,"sku":"S2405L01001","price":411.29,"currency_code":"GBP","in_stock":true},{"title":"Rear \/ RST 3","offer_id":47650090549544,"sku":"S2405T03001","price":290.57,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/5767\/7352\/files\/pagid-brake-pads-porsche-996-turbo-99-05-rear-rs-42-416.webp?v=1741788596"},{"product_id":"ysr-dynamic-pro-sport-coilovers-porsche-911-996-carrera-2-97-05","title":"YSR Dynamic Pro Sport Coilovers Porsche 911 996 Carrera 2 97-05","description":"\u003ch2\u003eDynamic Pro Sport\u003c\/h2\u003e\n\u003cdiv style=\"background-image: url('https:\/\/www.tegiwaimports.com\/media\/ysr-desc\/DPS.jpg'); background-size: cover; background-position: center; display: flex; justify-content: flex-start; position: relative; color: white; padding: 20px; margin-bottom: 20px; font-size: 0.9rem;\"\u003e\n    \u003cdiv style=\"position: absolute; top: 0; left: 0; width: 100%; height: 100%; background-color: rgba(0, 0, 0, 0.4); z-index: 1;\"\u003e\u003c\/div\u003e\n    \u003cdiv style=\"position: relative; z-index: 2; width: 70%; display: flex; flex-direction: column;\"\u003e\n        \u003cp style=\"text-shadow: 2px 2px 6px rgba(0, 0, 0, 0.5);\"\u003eYellow Speed Racing's Dynamic Pro Sport coilovers are designed and developed for all motoring enthusiasts that want excellent handling without sacrificing comfort. This suspension system is ideal for daily driving and occasional, light track use. High quality components are adopted to ensure product durability and stability. Each application is fully test fitted and completely road tested to guarantee all our customers perfect performance and comfort expectations.\u003c\/p\u003e\n    \u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eDampening\u003c\/h2\u003e\n\u003cdiv style=\"background-image: url('https:\/\/www.tegiwaimports.com\/media\/ysr-desc\/YSR_ProductPage_DPS_Dampening.jpg'); background-size: cover; background-position: center; display: flex; justify-content: flex-start; position: relative; color: white; padding: 20px; margin-bottom: 20px; font-size: 0.9rem;\"\u003e\n    \u003cdiv style=\"position: absolute; top: 0; left: 0; width: 100%; height: 100%; background-color: rgba(0, 0, 0, 0.4); z-index: 1;\"\u003e\u003c\/div\u003e\n    \u003cdiv style=\"position: relative; z-index: 2; width: 70%; display: flex; flex-direction: column;\"\u003e\n        \u003cp style=\"text-shadow: 2px 2px 6px rgba(0, 0, 0, 0.5);\"\u003eThe Dynamic Pro Sport coilovers feature a 33-way adjustable dampening setting so you can fine-tune your ride to suit the road conditions. This allows the suspension to not only be tailored to your car but also your driving preference.\u003c\/p\u003e\n    \u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eSpares\u003c\/h2\u003e\n\u003cdiv style=\"background-image: url('https:\/\/www.tegiwaimports.com\/media\/ysr-desc\/Spares.jpg'); background-size: cover; background-position: center; display: flex; justify-content: flex-start; position: relative; color: white; padding: 20px; margin-bottom: 20px; font-size: 0.9rem;\"\u003e\n    \u003cdiv style=\"position: absolute; top: 0; left: 0; width: 100%; height: 100%; background-color: rgba(0, 0, 0, 0.4); z-index: 1;\"\u003e\u003c\/div\u003e\n    \u003cdiv style=\"position: relative; z-index: 2; width: 70%; display: flex; flex-direction: column;\"\u003e\n        \u003cp style=\"text-shadow: 2px 2px 6px rgba(0, 0, 0, 0.5);\"\u003eFrom dust covers to replacement struts, we have spare parts to refurbish or repair your coilover should the need ever arise.\u003c\/p\u003e\n        \u003cdiv style=\"display: flex; gap: 20px;\"\u003e\n            \u003cp\u003e\u003ca href=\"https:\/\/www.tegiwa.com\/products\/yellow-speed-racing-double-a-arm-strut-replacement-parts?_pos=3\u0026amp;_sid=d1fd45544\u0026amp;_ss=r\u0026amp;_fid=c37847c28\u0026amp;variant=54908585836925\" target=\"_blank\" style=\"color: yellow; text-decoration: underline;\"\u003eView Spares: Double A-Arm\u003c\/a\u003e\u003c\/p\u003e\n            \u003cp\u003e\u003ca href=\"https:\/\/www.tegiwa.com\/products\/yellow-speed-racing-macpherson-strut-replacement-parts?_pos=2\u0026amp;_sid=f753f2af9\u0026amp;_ss=r\u0026amp;_fid=c8aad5f9f\u0026amp;variant=54908585017725\" target=\"_blank\" style=\"color: yellow; text-decoration: underline;\"\u003eView Spares: MacPherson Strut\u003c\/a\u003e\u003c\/p\u003e\n        \u003c\/div\u003e\n    \u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eAdjustable Ride Height\u003c\/h2\u003e\n\u003cdiv style=\"background-image: url('https:\/\/www.tegiwaimports.com\/media\/ysr-desc\/Height.jpg'); background-size: cover; background-position: center; display: flex; justify-content: flex-start; position: relative; color: white; padding: 20px; margin-bottom: 20px; font-size: 0.9rem;\"\u003e\n    \u003cdiv style=\"position: absolute; top: 0; left: 0; width: 100%; height: 100%; background-color: rgba(0, 0, 0, 0.4); z-index: 1;\"\u003e\u003c\/div\u003e\n    \u003cdiv style=\"position: relative; z-index: 2; width: 70%; display: flex; flex-direction: column;\"\u003e\n        \u003cp style=\"text-shadow: 2px 2px 6px rgba(0, 0, 0, 0.5);\"\u003eDynamic Pro Sport coilovers have an adjustable ride-height between 50mm-100mm depending on application. For those looking to go even lower, the Super Low coilover is the one for you.\u003c\/p\u003e\n    \u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003e24 Month Warranty\u003c\/h2\u003e\n\u003cdiv style=\"background-image: url('https:\/\/www.tegiwaimports.com\/media\/ysr-desc\/Warranty.jpg'); background-size: cover; background-position: center; display: flex; justify-content: flex-start; position: relative; color: white; padding: 20px; margin-bottom: 20px; font-size: 0.9rem;\"\u003e\n    \u003cdiv style=\"position: absolute; top: 0; left: 0; width: 100%; height: 100%; background-color: rgba(0, 0, 0, 0.4); z-index: 1;\"\u003e\u003c\/div\u003e\n    \u003cdiv style=\"position: relative; z-index: 2; width: 70%; display: flex; flex-direction: column;\"\u003e\n        \u003cp style=\"text-shadow: 2px 2px 6px rgba(0, 0, 0, 0.5);\"\u003eWe want Yellow Speed Racing coilovers to be a manufacturer you can depend on. That's why the Dynamic Pro Sports come with a 24-month limited warranty which guarantees against defects from materials and workmanship.\u003c\/p\u003e\n    \u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eRace Proven\u003c\/h2\u003e\n\u003cdiv style=\"background-image: url('https:\/\/www.tegiwaimports.com\/media\/ysr-desc\/RaceProven.jpg'); background-size: cover; background-position: center; display: flex; justify-content: flex-start; position: relative; color: white; padding: 20px; margin-bottom: 20px; font-size: 0.9rem;\"\u003e\n    \u003cdiv style=\"position: absolute; top: 0; left: 0; width: 100%; height: 100%; background-color: rgba(0, 0, 0, 0.4); z-index: 1;\"\u003e\u003c\/div\u003e\n    \u003cdiv style=\"position: relative; z-index: 2; width: 70%; display: flex; flex-direction: column;\"\u003e\n        \u003cp style=\"text-shadow: 2px 2px 6px rgba(0, 0, 0, 0.5);\"\u003eYellow Speed Racing has been giving race-spec vehicles the platform to win races and compete at the highest levels of motorsport through their suspension systems.\u003c\/p\u003e\n    \u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eMaintenance\u003c\/h2\u003e\n\u003cdiv style=\"background-image: url('https:\/\/www.tegiwaimports.com\/media\/ysr-desc\/Maintenance.jpg'); background-size: cover; background-position: center; display: flex; justify-content: flex-start; position: relative; color: white; padding: 20px; margin-bottom: 20px; font-size: 0.9rem;\"\u003e\n    \u003cdiv style=\"position: absolute; top: 0; left: 0; width: 100%; height: 100%; background-color: rgba(0, 0, 0, 0.4); z-index: 1;\"\u003e\u003c\/div\u003e\n    \u003cdiv style=\"position: relative; z-index: 2; width: 70%; display: flex; flex-direction: column;\"\u003e\n        \u003cp style=\"text-shadow: 2px 2px 6px rgba(0, 0, 0, 0.5);\"\u003eProtect your coilovers with purpose suspension shock sock covers. Made of neoprene\u003c\/p\u003e\n    \u003c\/div\u003e\n\u003c\/div\u003e","brand":"YSR","offers":[{"title":"Default Title","offer_id":47669742895400,"sku":"YS01-PO-DPS999","price":1061.79,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/5767\/7352\/files\/ysr-dynamic-pro-sport-coilovers-porsche-911-996-carrera-2-97-05-635.webp?v=1749043809"},{"product_id":"ysr-dynamic-pro-sport-coilovers-porsche-911-996-gt2-01-05","title":"YSR Dynamic Pro Sport Coilovers Porsche 911 996 GT2 01-05","description":"\u003ch2\u003eDynamic Pro Sport\u003c\/h2\u003e\n\u003cdiv style=\"background-image: url('https:\/\/www.tegiwaimports.com\/media\/ysr-desc\/DPS.jpg'); background-size: cover; background-position: center; display: flex; justify-content: flex-start; position: relative; color: white; padding: 20px; margin-bottom: 20px; font-size: 0.9rem;\"\u003e\n    \u003cdiv style=\"position: absolute; top: 0; left: 0; width: 100%; height: 100%; background-color: rgba(0, 0, 0, 0.4); z-index: 1;\"\u003e\u003c\/div\u003e\n    \u003cdiv style=\"position: relative; z-index: 2; width: 70%; display: flex; flex-direction: column;\"\u003e\n        \u003cp style=\"text-shadow: 2px 2px 6px rgba(0, 0, 0, 0.5);\"\u003eYellow Speed Racing's Dynamic Pro Sport coilovers are designed and developed for all motoring enthusiasts that want excellent handling without sacrificing comfort. This suspension system is ideal for daily driving and occasional, light track use. High quality components are adopted to ensure product durability and stability. Each application is fully test fitted and completely road tested to guarantee all our customers perfect performance and comfort expectations.\u003c\/p\u003e\n    \u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eDampening\u003c\/h2\u003e\n\u003cdiv style=\"background-image: url('https:\/\/www.tegiwaimports.com\/media\/ysr-desc\/YSR_ProductPage_DPS_Dampening.jpg'); background-size: cover; background-position: center; display: flex; justify-content: flex-start; position: relative; color: white; padding: 20px; margin-bottom: 20px; font-size: 0.9rem;\"\u003e\n    \u003cdiv style=\"position: absolute; top: 0; left: 0; width: 100%; height: 100%; background-color: rgba(0, 0, 0, 0.4); z-index: 1;\"\u003e\u003c\/div\u003e\n    \u003cdiv style=\"position: relative; z-index: 2; width: 70%; display: flex; flex-direction: column;\"\u003e\n        \u003cp style=\"text-shadow: 2px 2px 6px rgba(0, 0, 0, 0.5);\"\u003eThe Dynamic Pro Sport coilovers feature a 33-way adjustable dampening setting so you can fine-tune your ride to suit the road conditions. This allows the suspension to not only be tailored to your car but also your driving preference.\u003c\/p\u003e\n    \u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eSpares\u003c\/h2\u003e\n\u003cdiv style=\"background-image: url('https:\/\/www.tegiwaimports.com\/media\/ysr-desc\/Spares.jpg'); background-size: cover; background-position: center; display: flex; justify-content: flex-start; position: relative; color: white; padding: 20px; margin-bottom: 20px; font-size: 0.9rem;\"\u003e\n    \u003cdiv style=\"position: absolute; top: 0; left: 0; width: 100%; height: 100%; background-color: rgba(0, 0, 0, 0.4); z-index: 1;\"\u003e\u003c\/div\u003e\n    \u003cdiv style=\"position: relative; z-index: 2; width: 70%; display: flex; flex-direction: column;\"\u003e\n        \u003cp style=\"text-shadow: 2px 2px 6px rgba(0, 0, 0, 0.5);\"\u003eFrom dust covers to replacement struts, we have spare parts to refurbish or repair your coilover should the need ever arise.\u003c\/p\u003e\n        \u003cdiv style=\"display: flex; gap: 20px;\"\u003e\n            \u003cp\u003e\u003ca href=\"https:\/\/www.tegiwa.com\/products\/yellow-speed-racing-double-a-arm-strut-replacement-parts?_pos=3\u0026amp;_sid=d1fd45544\u0026amp;_ss=r\u0026amp;_fid=c37847c28\u0026amp;variant=54908585836925\" target=\"_blank\" style=\"color: yellow; text-decoration: underline;\"\u003eView Spares: Double A-Arm\u003c\/a\u003e\u003c\/p\u003e\n            \u003cp\u003e\u003ca href=\"https:\/\/www.tegiwa.com\/products\/yellow-speed-racing-macpherson-strut-replacement-parts?_pos=2\u0026amp;_sid=f753f2af9\u0026amp;_ss=r\u0026amp;_fid=c8aad5f9f\u0026amp;variant=54908585017725\" target=\"_blank\" style=\"color: yellow; text-decoration: underline;\"\u003eView Spares: MacPherson Strut\u003c\/a\u003e\u003c\/p\u003e\n        \u003c\/div\u003e\n    \u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eAdjustable Ride Height\u003c\/h2\u003e\n\u003cdiv style=\"background-image: url('https:\/\/www.tegiwaimports.com\/media\/ysr-desc\/Height.jpg'); background-size: cover; background-position: center; display: flex; justify-content: flex-start; position: relative; color: white; padding: 20px; margin-bottom: 20px; font-size: 0.9rem;\"\u003e\n    \u003cdiv style=\"position: absolute; top: 0; left: 0; width: 100%; height: 100%; background-color: rgba(0, 0, 0, 0.4); z-index: 1;\"\u003e\u003c\/div\u003e\n    \u003cdiv style=\"position: relative; z-index: 2; width: 70%; display: flex; flex-direction: column;\"\u003e\n        \u003cp style=\"text-shadow: 2px 2px 6px rgba(0, 0, 0, 0.5);\"\u003eDynamic Pro Sport coilovers have an adjustable ride-height between 50mm-100mm depending on application. For those looking to go even lower, the Super Low coilover is the one for you.\u003c\/p\u003e\n    \u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003e24 Month Warranty\u003c\/h2\u003e\n\u003cdiv style=\"background-image: url('https:\/\/www.tegiwaimports.com\/media\/ysr-desc\/Warranty.jpg'); background-size: cover; background-position: center; display: flex; justify-content: flex-start; position: relative; color: white; padding: 20px; margin-bottom: 20px; font-size: 0.9rem;\"\u003e\n    \u003cdiv style=\"position: absolute; top: 0; left: 0; width: 100%; height: 100%; background-color: rgba(0, 0, 0, 0.4); z-index: 1;\"\u003e\u003c\/div\u003e\n    \u003cdiv style=\"position: relative; z-index: 2; width: 70%; display: flex; flex-direction: column;\"\u003e\n        \u003cp style=\"text-shadow: 2px 2px 6px rgba(0, 0, 0, 0.5);\"\u003eWe want Yellow Speed Racing coilovers to be a manufacturer you can depend on. That's why the Dynamic Pro Sports come with a 24-month limited warranty which guarantees against defects from materials and workmanship.\u003c\/p\u003e\n    \u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eRace Proven\u003c\/h2\u003e\n\u003cdiv style=\"background-image: url('https:\/\/www.tegiwaimports.com\/media\/ysr-desc\/RaceProven.jpg'); background-size: cover; background-position: center; display: flex; justify-content: flex-start; position: relative; color: white; padding: 20px; margin-bottom: 20px; font-size: 0.9rem;\"\u003e\n    \u003cdiv style=\"position: absolute; top: 0; left: 0; width: 100%; height: 100%; background-color: rgba(0, 0, 0, 0.4); z-index: 1;\"\u003e\u003c\/div\u003e\n    \u003cdiv style=\"position: relative; z-index: 2; width: 70%; display: flex; flex-direction: column;\"\u003e\n        \u003cp style=\"text-shadow: 2px 2px 6px rgba(0, 0, 0, 0.5);\"\u003eYellow Speed Racing has been giving race-spec vehicles the platform to win races and compete at the highest levels of motorsport through their suspension systems.\u003c\/p\u003e\n    \u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eMaintenance\u003c\/h2\u003e\n\u003cdiv style=\"background-image: url('https:\/\/www.tegiwaimports.com\/media\/ysr-desc\/Maintenance.jpg'); background-size: cover; background-position: center; display: flex; justify-content: flex-start; position: relative; color: white; padding: 20px; margin-bottom: 20px; font-size: 0.9rem;\"\u003e\n    \u003cdiv style=\"position: absolute; top: 0; left: 0; width: 100%; height: 100%; background-color: rgba(0, 0, 0, 0.4); z-index: 1;\"\u003e\u003c\/div\u003e\n    \u003cdiv style=\"position: relative; z-index: 2; width: 70%; display: flex; flex-direction: column;\"\u003e\n        \u003cp style=\"text-shadow: 2px 2px 6px rgba(0, 0, 0, 0.5);\"\u003eProtect your coilovers with purpose suspension shock sock covers. Made of neoprene\u003c\/p\u003e\n    \u003c\/div\u003e\n\u003c\/div\u003e","brand":"YSR","offers":[{"title":"Default Title","offer_id":47669743092008,"sku":"YS01-PO-DPS997","price":1061.79,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/5767\/7352\/files\/ysr-dynamic-pro-sport-coilovers-porsche-911-996-gt2-01-05-659.webp?v=1716801103"},{"product_id":"bc-racing-br-series-coilovers-porsche-911-996-97-05-turbo-awd","title":"BC Racing BR-Series Coilovers Porsche 911 (996) 97-05 - Turbo AWD","description":"\u003cp\u003eThe BR series coilovers use a large 46mm diameter piston in a 53mm diameter damper body to maximise oil capacity.\u003c\/p\u003e\n\u003cp\u003eAs the damper unit operates the oil contained within heats up. The viscosity of oil changes as its temperature varies which can lead to changes in the damping characteristic of the unit.\u003c\/p\u003e\n\u003cp\u003eBC Racing only use a very high quality oil with their coilovers but go that extra mile to maximise performance and build their BR range with a large 53mm diameter damper body. This increases the capacity of the unit which increases the volume of oil contained which in turn reduces the peak temperature and so significantly improves damper performance.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePillowball upper mount\u003c\/li\u003e\n\u003cli\u003eCamber adjustable top mounts\u003c\/li\u003e\n\u003cli\u003eAluminium top plates\u003c\/li\u003e\n\u003cli\u003e30 way adjustable damping\u003c\/li\u003e\n\u003cli\u003eAdjustable spring platform\u003c\/li\u003e\n\u003cli\u003eHeight adjustment via bottom mount to retain full damper travel\u003c\/li\u003e\n\u003cli\u003eBearing mounted upper front spring platform\u003c\/li\u003e\n\u003cli\u003eDust boot to protect damper seals\u003c\/li\u003e\n\u003cli\u003e* some features are dependent on model\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eCorner weight adjustment\u003c\/h2\u003e\n\u003cp\u003eThe lower spring platform of the BC Racing coilovers are adjustable. This allows the car to be set up for corner weighting to achieve perfect balance and ensures that maximum tyre efficiency is achieved.\u003c\/p\u003e\n\u003cp\u003eThe car needs to be placing equal weight on each tyre on an axle so both front tyres need to be taking equal loading as do both rears. This makes sure that both tyres are doing their equal share of work when cornering which increases overall grip, maximises corner speed and reduces lap times.\u003c\/p\u003e\n\u003cp\u003eOptional assister springs can be purchased to allow wheel droop to be dialled into the unit to suit specific needs.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e \u003c\/h2\u003e\n\u003ch2\u003eRide height adjustment\u003c\/h2\u003e\n\u003cp\u003eRide height is determined by the position of the coilover bottom mount. The mount can be wound up and down the damper body to give a full range of adjustment.\u003c\/p\u003e\n\u003cp\u003eBecause ride height is determined by an adjustable bottom mount rather than spring platform you retain full damper travel regardless of the ride height run.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e \u003c\/h2\u003e\n\u003ch2\u003eDamping adjustment\u003c\/h2\u003e\n\u003cp\u003eBR coilovers feature 30 way damping adjustment that combines both rebound and compression in one adjuster for simplicity and ease of use. This adjustable facility allows you to fine tune the vehicle to meet the relevant conditions.\u003c\/p\u003e\n\u003cp\u003eBy tweaking front and rear damping you can adjust the way the car handles. Increasing damping force on the rear relative to the front, for example, will start moving the vehicle into a more oversteer orientated stance.\u003c\/p\u003e\n\u003cp\u003eIf you want to go drag racing in a rear wheel drive car then you want the back of the car to squat off the line to maximise weight transfer to the rear and therefore onto the rear tyres. This maximises traction and helps prevent wheel spin. To achieve this you would soften the rear dampers to allow faster compression. If you had the rear dampers set to hard, as you might run the car on a race track, then the car would be less inclined to squat so traction would be reduced.\u003c\/p\u003e\n\u003cp\u003eConversely, if you want to go drifting and are finding it hard to break traction and are having problems with understeer then making the rear dampers harder will help reduce traction whilst making the front dampers softer will give greater front traction. This will make the rear of the car looser whilst minimising understeer thus altering the vehicles handling characteristics more towards drift than drag, road or track.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e \u003c\/h2\u003e\n\u003ch2\u003ePillowball (rose joint) upper mount\u003c\/h2\u003e\n\u003cp\u003eMany of the BC Racing BR coilovers come with pillowball upper mounts. The mount itself is made from aluminium alloy, anodised and then bead blasted to give a high quality, durable finish.\u003c\/p\u003e\n\u003cp\u003eThe pillowballs themselves are of Japanese manufacture and their solid nature eliminates any flex or play associated with the standard rubber mounts so improving response and handling.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e \u003c\/h2\u003e\n\u003ch2\u003eCamber adjustment\u003c\/h2\u003e\n\u003cp\u003eIf its possible to include camber adjustment on your vehicle then the BC Racing coilovers automatically include camber adjustable aluminium pillowball top mounts. These feature the same high quality Japanese manufactured pillowball but give the added benefit of an adjustable top mount that allows camber to be set to suit your needs be it road, track or drift.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e \u003c\/h2\u003e\n\u003ch2\u003eCorrosion protection\u003c\/h2\u003e\n\u003cp\u003eThe damper units are black chromed steel to give superb durability even through the darkest of European winters. The aluminium components (top mounts, locking collars etc) are anodised and the steel lower mounts go through an electrophoretic disposition process followed by powder coating. A random selection of steel components (brackets, dampers, screws etc) are put through a salt spray test once a month to check the quality of the protective processes and that anti corrosive properties are kept at the highest possible standard.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e \u003c\/h2\u003e\n\u003ch2\u003eHigh quality coil springs\u003c\/h2\u003e\n\u003cp\u003eBC Racing coilovers only use the highest quality steel for their spring manufacturer. They are produced from SAE9254 high strength durable cold wound steel.\u003c\/p\u003e\n\u003cp\u003eThe springs are compression tested through over 500,000 cycles with less that 5% deformation.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e \u003c\/h2\u003e\n\u003ch2\u003ePatented concave lower locking collar\u003c\/h2\u003e\n\u003cp\u003eCoilovers use a locking collar to prevent the bottom mount becoming loose. If the bottom mount becomes loose then the damper body can work its way down into the bottom mount so reducing ride height on that one corner which can lead to dangerous handling characteristics. This is a very common problem for coilovers in general. BC Racing utilise an innovative and patented designed lower locking collar with a bevelled edge that seats into a corresponding bevel in the coilover bottom mount. This vastly increases the surface area that the locking collar works on and so prevents the common and dangerous problem of the locking collars working loose.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e \u003c\/h2\u003e\n\u003ch2\u003eHigh quality oil\u003c\/h2\u003e\n\u003cp\u003eBC Racing dampers use a sophisticated shim stack design and high quality oil to consistently control the compression and rebound speed of the damper rod even under the most extreme conditions.\u003c\/p\u003e\n\u003cp\u003eAs the vehicles travels over rough ground the compression and rebound motion of the damper rod heats the oil. Poor quality dampers use cheap oil whose characteristics alter with varying temperatures. Its vital that high quality oil is used that can maintain consistent viscosity under a wide temperature operating range. Once the oil start to degrade, its properties change leading to damping changes leading to changes in the vehicles handling characteristics.\u003c\/p\u003e\n\u003cp\u003eBC Racing ensures that only high quality oil is used so that damping rates are maintained not only for the moment in hand (i.e. whilst out for a back road blast on or track) but that long term longevity is maximised with oil that doesn't degrade quickly over time thus extending the dampers operating life significantly.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e \u003c\/h2\u003e\n\u003ch2\u003eNitrogen pressurised dampers\u003c\/h2\u003e\n\u003cp\u003eWhen you work a damper hard on track or on high speed bumpy roads you can cause the oil to aerate and cavitation can occour. This causes foaming which effectively reduces the oils viscosity and so reduces the units damping effect. High quality oil goes a long way to help reduce this problem but BC Racing go one step further and pressurise the dampers with nitrogen. The nitrogen exerts a pressure on a floating piston which in turn exerts a permanent pressure on the oil dramatically reducing aeration and so improving the consistency and quality of the damping. The pressurised nitrogen also adds an additional element of effective spring rate to the damper unit.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e \u003c\/h2\u003e\n\u003ch2\u003eBearing mounted upper spring platform\u003c\/h2\u003e\n\u003cp\u003eBecause the spring twists as it compresses it is very important to minimise stiction between the spring and its seats. If this tension is not relieved then spring binding can occur leading to the spring rate effectively altering slightly as the spring compresses and extends. The tension generated can lead to rapid deterioration of the spring pearches and in extreme cases can cause the spring platform and locking collars to loosen. This can lead to the platform and locking collars ‘walking' down the damper resulting in un even ride height and danger of the spring dislocating under full damper extension.\u003c\/p\u003e\n\u003cp\u003eThe friction between spring and seats also has an effect on steering effort as the springs are physically turned with the wheels. This introduces additional unnecessary friction into the steering system which has a knock on detrimental effect on the vehicles handling characteristics.\u003c\/p\u003e\n\u003cp\u003eThe bearing mounted upper spring platform is one of BC Racings innovative designs. By vastly reducing stiction between the spring and its seats the BC Racing units avoid the above problems thus improving the efficiency of the steering system and allowing the spring and damper to work as designed.\u003c\/p\u003e","brand":"BC Racing","offers":[{"title":"Default Title","offer_id":47686869221672,"sku":"BC-0023965","price":1099.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/5767\/7352\/files\/bc-racing-br-series-coilovers-porsche-911-996-97-05-turbo-awd-205.webp?v=1736508358"},{"product_id":"milltek-porsche-911-996-carrera-and-carrera-s-c2-and-c4-1998-2005-cat-back-exhaust","title":"Milltek Porsche 911 996 Carrera and Carrera S (C2 and C4) 1998-2005 Cat-back Exhaust","description":"\u003cp\u003eAll Milltek performance exhaust systems are manufactured from T304L stainless-steel; giving you the satisfaction of knowing that our products are meant to last within some of the toughest environments. T304L is a highly durable form of stainless-steel that is far less susceptible to degradation and discolouration than many others of its kind, while it will last almost indefinitely.\u003c\/p\u003e","brand":"Milltek","offers":[{"title":"Default Title","offer_id":47745623654696,"sku":"MIL-SSXPO019","price":1103.09,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/5767\/7352\/files\/milltek-porsche-911-996-carrera-and-s-c2-c4-1998-2005-cat-back-exhaust-systems-293.webp?v=1752730962"},{"product_id":"milltek-porsche-911-996-turbo-inc-x50-gt2-2000-2005-free-flow-manifolds-exhaust","title":"Milltek Porsche 911 996 Turbo (inc X50\/GT2) 2000-2005 Free-flow Manifolds Exhaust","description":"\u003cp\u003eAll Milltek performance exhaust systems are manufactured from T304L stainless-steel; giving you the satisfaction of knowing that our products are meant to last within some of the toughest environments. T304L is a highly durable form of stainless-steel that is far less susceptible to degradation and discolouration than many others of its kind, while it will last almost indefinitely.\u003c\/p\u003e","brand":"Milltek","offers":[{"title":"Default Title","offer_id":47745623753000,"sku":"MIL-SSXPO026","price":1022.42,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/5767\/7352\/files\/milltek-porsche-911-996-turbo-inc-x50-gt2-2000-2005-free-flow-manifolds-exhaust-systems-620.webp?v=1752729034"},{"product_id":"hawk-performance-blue-9012-motorsports-brake-pads-front-hb550e-634","title":"HAWK Performance Blue 9012 Motorsports Brake Pads Front - HB550E.634","description":"\u003cdiv\u003e\n\u003cp\u003eDesigned as an entry level endurance compound, there's nothing second-string about Hawk's Blue 9012 race compound. Easier to bed in and delivering excellent pad and rotor life, Blue 9012 is a medium torque pad developed specifically for Road, Rally and Circle Track racing.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003eEndurance Compound\u003c\/li\u003e\n\u003cli\u003eMedium Friction\u003c\/li\u003e\n\u003cli\u003eIntermediate Initial Bite\u003c\/li\u003e\n\u003cli\u003eIncreased Mid-Mu Characteristics\u003c\/li\u003e\n\u003cli\u003e250-1000 Deg F Operating Temperature Range\u003c\/li\u003e\n\u003cli\u003e350-800 Deg F Optimal Temperature Range\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003ch3\u003eHawk Brake Pad Installation Procedure\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eInstall Brake pads properly. Be sure pads are securely positioned in the caliper.\u003c\/li\u003e\n\u003cli\u003eFlush system with fresh brake fluid.\u003c\/li\u003e\n\u003cli\u003eCheck all hydraulic parts for excess wear and tear.\u003c\/li\u003e\n\u003cli\u003eCheck disc for proper thickness, parallelism, and lateral run-out.\u003c\/li\u003e\n\u003cli\u003eCheck disc for scoring or grooves over .012\"\" depth. If either applies, resurfacing or replacement is required.\u003c\/li\u003e\n\u003cli\u003eIf disc does not need resurfacing then contamination from the previous brake pads must be removed. Sand discs with Garnet sandpaper using moderate pressure. Use soap and water to clean off disc surface after sanding and machining. Discs should be free and clear of oil, grease, and brake fluid\u003c\/li\u003e\n\u003cli\u003eInspect calipers for freedom of movement. Lubricate where necessary\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eHawk Brake Pad Bedding Procedure - Motorsports Pads\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAfter reaching medium speed engage brake pedal to slow car without coming to a complete stop. Release pedal quickly and do not drag brakes. Repeat four or five times.\u003c\/li\u003e\n\u003cli\u003eAt higher speeds engage brake pedal to slow car without coming to a complete stop. Release pedal quickly and do not drag brakes. Repeat five times.\u003c\/li\u003e\n\u003cli\u003eAt or near race speed engage brake pedal to slow car without coming to a complete stop. Release pedal quickly and do not drag brakes. Repeat three times. Allow a few seconds between brake engagements while car is in motion.\u003c\/li\u003e\n\u003cli\u003eDo not hold brake pedal. Park car for approximately 20 minutes or until brake rotors are completely cool to the touch.\u003c\/li\u003e\n\u003cli\u003eIf during the above steps the brake pedal becomes soft or brake fade is noticed, park the car immediately for approximately 20 minutes. Do not hold brake pedal.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eImportant Reminders when Burnishing or Bedding Brake Pads\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eDo not attempt to use badly worn or damaged rotors with new brake pads.\u003c\/li\u003e\n\u003cli\u003eDo not drag brakes while car is moving during break-in procedure.\u003c\/li\u003e\n\u003cli\u003eDo not engage pedal while car is stopped at any time following the break-in procedure.\u003c\/li\u003e\n\u003cli\u003eUpon completing the procedure, allow the brake system to completely cool before racing.\u003c\/li\u003e\n\u003cli\u003eApplying the pedal a few times before the start of the race will allow the brake pads to heat up before attempting to reach race speeds.\u003c\/li\u003e\n\u003cli\u003eClean a used rotor surface with fine sand paper or steel wool, rinse with water, dry and install before bedding new pads.\u003c\/li\u003e\n\u003cli\u003eSome forms of racing do not allow time for the proper break-in procedure to be performed. However, it is still very important to attempt to perform at least the core of the procedure: Build up heat slowly and allow the system to completely cool down before racing if possible.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eLimited Lifetime Warranty\u003c\/h3\u003e\n\u003cp\u003eCarlisle Brake \u0026amp; Friction (CBF) warrants Hawk Performance branded products to be free of defects from workmanship and materials. This warranty does not apply to normal wear or damage caused by negligence, lack of maintenance, accident, abnormal operations, or improper installation or service. CBF does not make any other warranty claims, either expressed or implied, including the implied warranties of merchantability or fitness for a particular purpose. In no event will CBF\/Hawk Performance be liable for incidental or consequential damages of any kind, whether such damages are claimed on account of breach of warranty, breach of contract, negligence, or strict product liability. This includes without limitation, damage to property, or other economic losses that may be incurred. Any, and all, warranty claims must be processed through CBF. All valid warranty claims will be replaced and\/or reimbursed with Hawk Performance branded products of equal or greater value.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e* Disclaimer to Limited Life-Time Warranty: Motorsports brake pads and rotors are developed for high performance events. Racing is a dangerous sport. Hawk Performance racing brake pads and rotors are sold without warranty expressed or implied. No warranty or representation is made as to this products ability to protect the user from injury or death. The user assumes that risk.\u003c\/strong\u003e\u003c\/p\u003e","brand":"HAWK Performance","offers":[{"title":"Default Title","offer_id":47780265689384,"sku":"HWK-HB550E.634","price":303.68,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/5767\/7352\/files\/hawk-performance-blue-9012-motorsports-brake-pads-front-hb550e-634-842.webp?v=1716840243"},{"product_id":"hawk-performance-blue-9012-motorsports-brake-pads-rear-hb290e-583","title":"HAWK Performance Blue 9012 Motorsports Brake Pads Rear - HB290E.583","description":"\u003cdiv\u003e\n\u003cp\u003eDesigned as an entry level endurance compound, there's nothing second-string about Hawk's Blue 9012 race compound. Easier to bed in and delivering excellent pad and rotor life, Blue 9012 is a medium torque pad developed specifically for Road, Rally and Circle Track racing.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003eEndurance Compound\u003c\/li\u003e\n\u003cli\u003eMedium Friction\u003c\/li\u003e\n\u003cli\u003eIntermediate Initial Bite\u003c\/li\u003e\n\u003cli\u003eIncreased Mid-Mu Characteristics\u003c\/li\u003e\n\u003cli\u003e250-1000 Deg F Operating Temperature Range\u003c\/li\u003e\n\u003cli\u003e350-800 Deg F Optimal Temperature Range\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003ch3\u003eHawk Brake Pad Installation Procedure\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eInstall Brake pads properly. Be sure pads are securely positioned in the caliper.\u003c\/li\u003e\n\u003cli\u003eFlush system with fresh brake fluid.\u003c\/li\u003e\n\u003cli\u003eCheck all hydraulic parts for excess wear and tear.\u003c\/li\u003e\n\u003cli\u003eCheck disc for proper thickness, parallelism, and lateral run-out.\u003c\/li\u003e\n\u003cli\u003eCheck disc for scoring or grooves over .012\"\" depth. If either applies, resurfacing or replacement is required.\u003c\/li\u003e\n\u003cli\u003eIf disc does not need resurfacing then contamination from the previous brake pads must be removed. Sand discs with Garnet sandpaper using moderate pressure. Use soap and water to clean off disc surface after sanding and machining. Discs should be free and clear of oil, grease, and brake fluid\u003c\/li\u003e\n\u003cli\u003eInspect calipers for freedom of movement. Lubricate where necessary\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eHawk Brake Pad Bedding Procedure - Motorsports Pads\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAfter reaching medium speed engage brake pedal to slow car without coming to a complete stop. Release pedal quickly and do not drag brakes. Repeat four or five times.\u003c\/li\u003e\n\u003cli\u003eAt higher speeds engage brake pedal to slow car without coming to a complete stop. Release pedal quickly and do not drag brakes. Repeat five times.\u003c\/li\u003e\n\u003cli\u003eAt or near race speed engage brake pedal to slow car without coming to a complete stop. Release pedal quickly and do not drag brakes. Repeat three times. Allow a few seconds between brake engagements while car is in motion.\u003c\/li\u003e\n\u003cli\u003eDo not hold brake pedal. Park car for approximately 20 minutes or until brake rotors are completely cool to the touch.\u003c\/li\u003e\n\u003cli\u003eIf during the above steps the brake pedal becomes soft or brake fade is noticed, park the car immediately for approximately 20 minutes. Do not hold brake pedal.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eImportant Reminders when Burnishing or Bedding Brake Pads\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eDo not attempt to use badly worn or damaged rotors with new brake pads.\u003c\/li\u003e\n\u003cli\u003eDo not drag brakes while car is moving during break-in procedure.\u003c\/li\u003e\n\u003cli\u003eDo not engage pedal while car is stopped at any time following the break-in procedure.\u003c\/li\u003e\n\u003cli\u003eUpon completing the procedure, allow the brake system to completely cool before racing.\u003c\/li\u003e\n\u003cli\u003eApplying the pedal a few times before the start of the race will allow the brake pads to heat up before attempting to reach race speeds.\u003c\/li\u003e\n\u003cli\u003eClean a used rotor surface with fine sand paper or steel wool, rinse with water, dry and install before bedding new pads.\u003c\/li\u003e\n\u003cli\u003eSome forms of racing do not allow time for the proper break-in procedure to be performed. However, it is still very important to attempt to perform at least the core of the procedure: Build up heat slowly and allow the system to completely cool down before racing if possible.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eLimited Lifetime Warranty\u003c\/h3\u003e\n\u003cp\u003eCarlisle Brake \u0026amp; Friction (CBF) warrants Hawk Performance branded products to be free of defects from workmanship and materials. This warranty does not apply to normal wear or damage caused by negligence, lack of maintenance, accident, abnormal operations, or improper installation or service. CBF does not make any other warranty claims, either expressed or implied, including the implied warranties of merchantability or fitness for a particular purpose. In no event will CBF\/Hawk Performance be liable for incidental or consequential damages of any kind, whether such damages are claimed on account of breach of warranty, breach of contract, negligence, or strict product liability. This includes without limitation, damage to property, or other economic losses that may be incurred. Any, and all, warranty claims must be processed through CBF. All valid warranty claims will be replaced and\/or reimbursed with Hawk Performance branded products of equal or greater value.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e* Disclaimer to Limited Life-Time Warranty: Motorsports brake pads and rotors are developed for high performance events. Racing is a dangerous sport. Hawk Performance racing brake pads and rotors are sold without warranty expressed or implied. No warranty or representation is made as to this products ability to protect the user from injury or death. The user assumes that risk.\u003c\/strong\u003e\u003c\/p\u003e","brand":"HAWK Performance","offers":[{"title":"Default Title","offer_id":47780268736808,"sku":"HWK-HB290E.583","price":285.04,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/5767\/7352\/files\/hawk-performance-blue-9012-motorsports-brake-pads-rear-hb290e-583-519.webp?v=1716841056"},{"product_id":"hawk-performance-dtc-30-motorsports-brake-pads-front-hb667w-622","title":"HAWK Performance DTC-30 Motorsports Brake Pads Front - HB667W.622","description":"\u003cdiv\u003e\n\u003cp\u003eDTC-30 is a controllable torque, multi-purpose compound, proven effective in a range of series. It delivers superior release characteristics and smooth pedal feel and initial bite for dirt and circle tracks, NASCAR modified, drag racing, trophy trucks, pro buggies, and more.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cp\u003eIn addition to the applications mentioned above, the DTC-30 compound is often used on the rear axle of smaller race vehicles. Competitive racers of the Miata or S2000 will often choose DTC-30 for the rear axle paired with DTC-60 on the front. DTC-30 will also find itself on both axles of street driven vehicles when braking performance is top priority and owner is willing to sacrifice cleanliness and lack of brake noise.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003eConsistent, Smooth Braking\u003c\/li\u003e\n\u003cli\u003eEffective when Cold\u003c\/li\u003e\n\u003cli\u003e100-1200 Deg F Operating Temperature Range\u003c\/li\u003e\n\u003cli\u003e100-800 Deg F Optimal Temperature Range\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eFor motorsport use only. Image is for illustative purposes, actual product may differ.\u003c\/p\u003e\n\u003ch3\u003eHawk Brake Pad Installation Procedure\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eInstall Brake pads properly. Be sure pads are securely positioned in the caliper.\u003c\/li\u003e\n\u003cli\u003eFlush system with fresh brake fluid.\u003c\/li\u003e\n\u003cli\u003eCheck all hydraulic parts for excess wear and tear.\u003c\/li\u003e\n\u003cli\u003eCheck disc for proper thickness, parallelism, and lateral run-out.\u003c\/li\u003e\n\u003cli\u003eCheck disc for scoring or grooves over .012\"\" depth. If either applies, resurfacing or replacement is required.\u003c\/li\u003e\n\u003cli\u003eIf disc does not need resurfacing then contamination from the previous brake pads must be removed. Sand discs with Garnet sandpaper using moderate pressure. Use soap and water to clean off disc surface after sanding and machining. Discs should be free and clear of oil, grease, and brake fluid\u003c\/li\u003e\n\u003cli\u003eInspect calipers for freedom of movement. Lubricate where necessary\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eHawk Brake Pad Bedding Procedure - Motorsports Pads\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAfter reaching medium speed engage brake pedal to slow car without coming to a complete stop. Release pedal quickly and do not drag brakes. Repeat four or five times.\u003c\/li\u003e\n\u003cli\u003eAt higher speeds engage brake pedal to slow car without coming to a complete stop. Release pedal quickly and do not drag brakes. Repeat five times.\u003c\/li\u003e\n\u003cli\u003eAt or near race speed engage brake pedal to slow car without coming to a complete stop. Release pedal quickly and do not drag brakes. Repeat three times. Allow a few seconds between brake engagements while car is in motion.\u003c\/li\u003e\n\u003cli\u003eDo not hold brake pedal. Park car for approximately 20 minutes or until brake rotors are completely cool to the touch.\u003c\/li\u003e\n\u003cli\u003eIf during the above steps the brake pedal becomes soft or brake fade is noticed, park the car immediately for approximately 20 minutes. Do not hold brake pedal.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eImportant Reminders when Burnishing or Bedding Brake Pads\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eDo not attempt to use badly worn or damaged rotors with new brake pads.\u003c\/li\u003e\n\u003cli\u003eDo not drag brakes while car is moving during break-in procedure.\u003c\/li\u003e\n\u003cli\u003eDo not engage pedal while car is stopped at any time following the break-in procedure.\u003c\/li\u003e\n\u003cli\u003eUpon completing the procedure, allow the brake system to completely cool before racing.\u003c\/li\u003e\n\u003cli\u003eApplying the pedal a few times before the start of the race will allow the brake pads to heat up before attempting to reach race speeds.\u003c\/li\u003e\nli\u0026gt;Clean a used rotor surface with fine sand paper or steel wool, rinse with water, dry and install before bedding new pads\n\u003cli\u003eSome forms of racing do not allow time for the proper break-in procedure to be performed. However, it is still very important to attempt to perform at least the core of the procedure: Build up heat slowly and allow the system to completely cool down before racing if possible.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eLimited Lifetime Warranty\u003c\/h3\u003e\n\u003cp\u003eCarlisle Brake \u0026amp; Friction (CBF) warrants Hawk Performance branded products to be free of defects from workmanship and materials. This warranty does not apply to normal wear or damage caused by negligence, lack of maintenance, accident, abnormal operations, or improper installation or service. CBF does not make any other warranty claims, either expressed or implied, including the implied warranties of merchantability or fitness for a particular purpose. In no event will CBF\/Hawk Performance be liable for incidental or consequential damages of any kind, whether such damages are claimed on account of breach of warranty, breach of contract, negligence, or strict product liability. This includes without limitation, damage to property, or other economic losses that may be incurred. Any, and all, warranty claims must be processed through CBF. All valid warranty claims will be replaced and\/or reimbursed with Hawk Performance branded products of equal or greater value.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e* Disclaimer to Limited Life-Time Warranty: Motorsports brake pads and rotors are developed for high performance events. Racing is a dangerous sport. Hawk Performance racing brake pads and rotors are sold without warranty expressed or implied. No warranty or representation is made as to this products ability to protect the user from injury or death. The user assumes that risk.\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/div\u003e","brand":"HAWK Performance","offers":[{"title":"Default Title","offer_id":47787057840424,"sku":"HWK-HB667W.622","price":305.46,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/5767\/7352\/files\/hawk-performance-dtc-30-motorsports-brake-pads-front-hb667w-622-607.webp?v=1716852724"},{"product_id":"hawk-performance-dtc-60-motorsports-brake-pads-front-hb291g-642","title":"HAWK Performance DTC-60 Motorsports Brake Pads Front - HB291G.642","description":"\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cp\u003eRunning with extremely high deceleration rates and increased downforce poses different challenges, so Hawk designed DTC-60 race compound. Recommended with DTC-70 when split friction between axles is desired, it has excellent modulation and release characteristics.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cp\u003eDTC-60 has the same temperature range as DTC-70, but produces less brake torque. Many racers of lighter, smaller cars such as the Miata and S2000 will run DTC-60 Front and DTC-30 Rear. On larger, heavier, cars such as Corvettes, Mustangs, Porsches, BMWs and other specialty race cars, the DTC-60 is run on the rear with DTC-70 up front. This is not an entry level race compound and should not be driven on the street. Use when you are a serious racer with track experience and have had issues with less aggressive compounds overheating or not providing enough bite.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003eSuperior Release and Torque Control\u003c\/li\u003e\n\u003cli\u003eVery Low Pad and Rotor Wear\u003c\/li\u003e\n\u003cli\u003eHigh Torque\u003c\/li\u003e\n\u003cli\u003eExcellent Modulation and Release Characteristics\u003c\/li\u003e\n\u003cli\u003eApplicable to NASCAR, NASCAR modified, ARCA, Super Late models, pavement circle track, Pro 2, Pro 4 Off Road Trucks, Pro Lite, Sports Car, GT, GS, Open Wheel, Formula, Monster Trucks\u003c\/li\u003e\n\u003cli\u003eStable Friction Output\u003c\/li\u003e\n\u003cli\u003e400-1600 Deg F Operating Temperature Range\u003c\/li\u003e\n\u003cli\u003e600-1200 Deg F Optimal Temperature Range\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eFor motorsport use only. Image is for illustative purposes, actual product may differ.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003ch3\u003eHawk Brake Pad Installation Procedure\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eInstall Brake pads properly. Be sure pads are securely positioned in the caliper.\u003c\/li\u003e\n\u003cli\u003eFlush system with fresh brake fluid.\u003c\/li\u003e\n\u003cli\u003eCheck all hydraulic parts for excess wear and tear.\u003c\/li\u003e\n\u003cli\u003eCheck disc for proper thickness, parallelism, and lateral run-out.\u003c\/li\u003e\n\u003cli\u003eCheck disc for scoring or grooves over .012\"\" depth. If either applies, resurfacing or replacement is required.\u003c\/li\u003e\n\u003cli\u003eIf disc does not need resurfacing then contamination from the previous brake pads must be removed. Sand discs with Garnet sandpaper using moderate pressure. Use soap and water to clean off disc surface after sanding and machining. Discs should be free and clear of oil, grease, and brake fluid\u003c\/li\u003e\n\u003cli\u003eInspect calipers for freedom of movement. Lubricate where necessary\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eHawk Brake Pad Bedding Procedure - Motorsports Pads\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAfter reaching medium speed engage brake pedal to slow car without coming to a complete stop. Release pedal quickly and do not drag brakes. Repeat four or five times.\u003c\/li\u003e\n\u003cli\u003eAt higher speeds engage brake pedal to slow car without coming to a complete stop. Release pedal quickly and do not drag brakes. Repeat five times.\u003c\/li\u003e\n\u003cli\u003eAt or near race speed engage brake pedal to slow car without coming to a complete stop. Release pedal quickly and do not drag brakes. Repeat three times. Allow a few seconds between brake engagements while car is in motion.\u003c\/li\u003e\n\u003cli\u003eDo not hold brake pedal. Park car for approximately 20 minutes or until brake rotors are completely cool to the touch.\u003c\/li\u003e\n\u003cli\u003eIf during the above steps the brake pedal becomes soft or brake fade is noticed, park the car immediately for approximately 20 minutes. Do not hold brake pedal.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eImportant Reminders when Burnishing or Bedding Brake Pads\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eDo not attempt to use badly worn or damaged rotors with new brake pads.\u003c\/li\u003e\n\u003cli\u003eDo not drag brakes while car is moving during break-in procedure.\u003c\/li\u003e\n\u003cli\u003eDo not engage pedal while car is stopped at any time following the break-in procedure.\u003c\/li\u003e\n\u003cli\u003eUpon completing the procedure, allow the brake system to completely cool before racing.\u003c\/li\u003e\n\u003cli\u003eApplying the pedal a few times before the start of the race will allow the brake pads to heat up before attempting to reach race speeds.\u003c\/li\u003e\nli\u0026gt;Clean a used rotor surface with fine sand paper or steel wool, rinse with water, dry and install before bedding new pads\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"HAWK Performance","offers":[{"title":"Default Title","offer_id":47787067605288,"sku":"HWK-HB291G.642","price":368.65,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/5767\/7352\/files\/hawk-performance-dtc-60-motorsports-brake-pads-front-hb291g-642-847.webp?v=1716857885"},{"product_id":"hawk-performance-dtc-60-motorsports-brake-pads-front-hb483g-635","title":"HAWK Performance DTC-60 Motorsports Brake Pads Front - HB483G.635","description":"\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cp\u003eRunning with extremely high deceleration rates and increased downforce poses different challenges, so Hawk designed DTC-60 race compound. Recommended with DTC-70 when split friction between axles is desired, it has excellent modulation and release characteristics.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cp\u003eDTC-60 has the same temperature range as DTC-70, but produces less brake torque. Many racers of lighter, smaller cars such as the Miata and S2000 will run DTC-60 Front and DTC-30 Rear. On larger, heavier, cars such as Corvettes, Mustangs, Porsches, BMWs and other specialty race cars, the DTC-60 is run on the rear with DTC-70 up front. This is not an entry level race compound and should not be driven on the street. Use when you are a serious racer with track experience and have had issues with less aggressive compounds overheating or not providing enough bite.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003eSuperior Release and Torque Control\u003c\/li\u003e\n\u003cli\u003eVery Low Pad and Rotor Wear\u003c\/li\u003e\n\u003cli\u003eHigh Torque\u003c\/li\u003e\n\u003cli\u003eExcellent Modulation and Release Characteristics\u003c\/li\u003e\n\u003cli\u003eApplicable to NASCAR, NASCAR modified, ARCA, Super Late models, pavement circle track, Pro 2, Pro 4 Off Road Trucks, Pro Lite, Sports Car, GT, GS, Open Wheel, Formula, Monster Trucks\u003c\/li\u003e\n\u003cli\u003eStable Friction Output\u003c\/li\u003e\n\u003cli\u003e400-1600 Deg F Operating Temperature Range\u003c\/li\u003e\n\u003cli\u003e600-1200 Deg F Optimal Temperature Range\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eFor motorsport use only. Image is for illustative purposes, actual product may differ.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003ch3\u003eHawk Brake Pad Installation Procedure\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eInstall Brake pads properly. Be sure pads are securely positioned in the caliper.\u003c\/li\u003e\n\u003cli\u003eFlush system with fresh brake fluid.\u003c\/li\u003e\n\u003cli\u003eCheck all hydraulic parts for excess wear and tear.\u003c\/li\u003e\n\u003cli\u003eCheck disc for proper thickness, parallelism, and lateral run-out.\u003c\/li\u003e\n\u003cli\u003eCheck disc for scoring or grooves over .012\"\" depth. If either applies, resurfacing or replacement is required.\u003c\/li\u003e\n\u003cli\u003eIf disc does not need resurfacing then contamination from the previous brake pads must be removed. Sand discs with Garnet sandpaper using moderate pressure. Use soap and water to clean off disc surface after sanding and machining. Discs should be free and clear of oil, grease, and brake fluid\u003c\/li\u003e\n\u003cli\u003eInspect calipers for freedom of movement. Lubricate where necessary\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eHawk Brake Pad Bedding Procedure - Motorsports Pads\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAfter reaching medium speed engage brake pedal to slow car without coming to a complete stop. Release pedal quickly and do not drag brakes. Repeat four or five times.\u003c\/li\u003e\n\u003cli\u003eAt higher speeds engage brake pedal to slow car without coming to a complete stop. Release pedal quickly and do not drag brakes. Repeat five times.\u003c\/li\u003e\n\u003cli\u003eAt or near race speed engage brake pedal to slow car without coming to a complete stop. Release pedal quickly and do not drag brakes. Repeat three times. Allow a few seconds between brake engagements while car is in motion.\u003c\/li\u003e\n\u003cli\u003eDo not hold brake pedal. Park car for approximately 20 minutes or until brake rotors are completely cool to the touch.\u003c\/li\u003e\n\u003cli\u003eIf during the above steps the brake pedal becomes soft or brake fade is noticed, park the car immediately for approximately 20 minutes. Do not hold brake pedal.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eImportant Reminders when Burnishing or Bedding Brake Pads\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eDo not attempt to use badly worn or damaged rotors with new brake pads.\u003c\/li\u003e\n\u003cli\u003eDo not drag brakes while car is moving during break-in procedure.\u003c\/li\u003e\n\u003cli\u003eDo not engage pedal while car is stopped at any time following the break-in procedure.\u003c\/li\u003e\n\u003cli\u003eUpon completing the procedure, allow the brake system to completely cool before racing.\u003c\/li\u003e\n\u003cli\u003eApplying the pedal a few times before the start of the race will allow the brake pads to heat up before attempting to reach race speeds.\u003c\/li\u003e\nli\u0026gt;Clean a used rotor surface with fine sand paper or steel wool, rinse with water, dry and install before bedding new pads\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"HAWK Performance","offers":[{"title":"Default Title","offer_id":47787068129576,"sku":"HWK-HB483G.635","price":439.62,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/5767\/7352\/files\/hawk-performance-dtc-60-motorsports-brake-pads-front-hb483g-635-629.webp?v=1716858246"},{"product_id":"hawk-performance-dtc-60-motorsports-brake-pads-front-hb550g-634","title":"HAWK Performance DTC-60 Motorsports Brake Pads Front - HB550G.634","description":"\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cp\u003eRunning with extremely high deceleration rates and increased downforce poses different challenges, so Hawk designed DTC-60 race compound. Recommended with DTC-70 when split friction between axles is desired, it has excellent modulation and release characteristics.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cp\u003eDTC-60 has the same temperature range as DTC-70, but produces less brake torque. Many racers of lighter, smaller cars such as the Miata and S2000 will run DTC-60 Front and DTC-30 Rear. On larger, heavier, cars such as Corvettes, Mustangs, Porsches, BMWs and other specialty race cars, the DTC-60 is run on the rear with DTC-70 up front. This is not an entry level race compound and should not be driven on the street. Use when you are a serious racer with track experience and have had issues with less aggressive compounds overheating or not providing enough bite.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003eSuperior Release and Torque Control\u003c\/li\u003e\n\u003cli\u003eVery Low Pad and Rotor Wear\u003c\/li\u003e\n\u003cli\u003eHigh Torque\u003c\/li\u003e\n\u003cli\u003eExcellent Modulation and Release Characteristics\u003c\/li\u003e\n\u003cli\u003eApplicable to NASCAR, NASCAR modified, ARCA, Super Late models, pavement circle track, Pro 2, Pro 4 Off Road Trucks, Pro Lite, Sports Car, GT, GS, Open Wheel, Formula, Monster Trucks\u003c\/li\u003e\n\u003cli\u003eStable Friction Output\u003c\/li\u003e\n\u003cli\u003e400-1600 Deg F Operating Temperature Range\u003c\/li\u003e\n\u003cli\u003e600-1200 Deg F Optimal Temperature Range\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eFor motorsport use only. Image is for illustative purposes, actual product may differ.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003ch3\u003eHawk Brake Pad Installation Procedure\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eInstall Brake pads properly. Be sure pads are securely positioned in the caliper.\u003c\/li\u003e\n\u003cli\u003eFlush system with fresh brake fluid.\u003c\/li\u003e\n\u003cli\u003eCheck all hydraulic parts for excess wear and tear.\u003c\/li\u003e\n\u003cli\u003eCheck disc for proper thickness, parallelism, and lateral run-out.\u003c\/li\u003e\n\u003cli\u003eCheck disc for scoring or grooves over .012\"\" depth. If either applies, resurfacing or replacement is required.\u003c\/li\u003e\n\u003cli\u003eIf disc does not need resurfacing then contamination from the previous brake pads must be removed. Sand discs with Garnet sandpaper using moderate pressure. Use soap and water to clean off disc surface after sanding and machining. Discs should be free and clear of oil, grease, and brake fluid\u003c\/li\u003e\n\u003cli\u003eInspect calipers for freedom of movement. Lubricate where necessary\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eHawk Brake Pad Bedding Procedure - Motorsports Pads\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAfter reaching medium speed engage brake pedal to slow car without coming to a complete stop. Release pedal quickly and do not drag brakes. Repeat four or five times.\u003c\/li\u003e\n\u003cli\u003eAt higher speeds engage brake pedal to slow car without coming to a complete stop. Release pedal quickly and do not drag brakes. Repeat five times.\u003c\/li\u003e\n\u003cli\u003eAt or near race speed engage brake pedal to slow car without coming to a complete stop. Release pedal quickly and do not drag brakes. Repeat three times. Allow a few seconds between brake engagements while car is in motion.\u003c\/li\u003e\n\u003cli\u003eDo not hold brake pedal. Park car for approximately 20 minutes or until brake rotors are completely cool to the touch.\u003c\/li\u003e\n\u003cli\u003eIf during the above steps the brake pedal becomes soft or brake fade is noticed, park the car immediately for approximately 20 minutes. Do not hold brake pedal.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eImportant Reminders when Burnishing or Bedding Brake Pads\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eDo not attempt to use badly worn or damaged rotors with new brake pads.\u003c\/li\u003e\n\u003cli\u003eDo not drag brakes while car is moving during break-in procedure.\u003c\/li\u003e\n\u003cli\u003eDo not engage pedal while car is stopped at any time following the break-in procedure.\u003c\/li\u003e\n\u003cli\u003eUpon completing the procedure, allow the brake system to completely cool before racing.\u003c\/li\u003e\n\u003cli\u003eApplying the pedal a few times before the start of the race will allow the brake pads to heat up before attempting to reach race speeds.\u003c\/li\u003e\nli\u0026gt;Clean a used rotor surface with fine sand paper or steel wool, rinse with water, dry and install before bedding new pads\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"HAWK Performance","offers":[{"title":"Default Title","offer_id":47787069702440,"sku":"HWK-HB550G.634","price":529.6,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/5767\/7352\/files\/hawk-performance-dtc-60-motorsports-brake-pads-front-hb550g-634-483.webp?v=1716858593"},{"product_id":"hawk-performance-dtc-60-motorsports-brake-pads-front-hb667g-622","title":"HAWK Performance DTC-60 Motorsports Brake Pads Front - HB667G.622","description":"\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cp\u003eRunning with extremely high deceleration rates and increased downforce poses different challenges, so Hawk designed DTC-60 race compound. Recommended with DTC-70 when split friction between axles is desired, it has excellent modulation and release characteristics.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cp\u003eDTC-60 has the same temperature range as DTC-70, but produces less brake torque. Many racers of lighter, smaller cars such as the Miata and S2000 will run DTC-60 Front and DTC-30 Rear. On larger, heavier, cars such as Corvettes, Mustangs, Porsches, BMWs and other specialty race cars, the DTC-60 is run on the rear with DTC-70 up front. This is not an entry level race compound and should not be driven on the street. Use when you are a serious racer with track experience and have had issues with less aggressive compounds overheating or not providing enough bite.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003eSuperior Release and Torque Control\u003c\/li\u003e\n\u003cli\u003eVery Low Pad and Rotor Wear\u003c\/li\u003e\n\u003cli\u003eHigh Torque\u003c\/li\u003e\n\u003cli\u003eExcellent Modulation and Release Characteristics\u003c\/li\u003e\n\u003cli\u003eApplicable to NASCAR, NASCAR modified, ARCA, Super Late models, pavement circle track, Pro 2, Pro 4 Off Road Trucks, Pro Lite, Sports Car, GT, GS, Open Wheel, Formula, Monster Trucks\u003c\/li\u003e\n\u003cli\u003eStable Friction Output\u003c\/li\u003e\n\u003cli\u003e400-1600 Deg F Operating Temperature Range\u003c\/li\u003e\n\u003cli\u003e600-1200 Deg F Optimal Temperature Range\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eFor motorsport use only. Image is for illustative purposes, actual product may differ.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003ch3\u003eHawk Brake Pad Installation Procedure\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eInstall Brake pads properly. Be sure pads are securely positioned in the caliper.\u003c\/li\u003e\n\u003cli\u003eFlush system with fresh brake fluid.\u003c\/li\u003e\n\u003cli\u003eCheck all hydraulic parts for excess wear and tear.\u003c\/li\u003e\n\u003cli\u003eCheck disc for proper thickness, parallelism, and lateral run-out.\u003c\/li\u003e\n\u003cli\u003eCheck disc for scoring or grooves over .012\"\" depth. If either applies, resurfacing or replacement is required.\u003c\/li\u003e\n\u003cli\u003eIf disc does not need resurfacing then contamination from the previous brake pads must be removed. Sand discs with Garnet sandpaper using moderate pressure. Use soap and water to clean off disc surface after sanding and machining. Discs should be free and clear of oil, grease, and brake fluid\u003c\/li\u003e\n\u003cli\u003eInspect calipers for freedom of movement. Lubricate where necessary\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eHawk Brake Pad Bedding Procedure - Motorsports Pads\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAfter reaching medium speed engage brake pedal to slow car without coming to a complete stop. Release pedal quickly and do not drag brakes. Repeat four or five times.\u003c\/li\u003e\n\u003cli\u003eAt higher speeds engage brake pedal to slow car without coming to a complete stop. Release pedal quickly and do not drag brakes. Repeat five times.\u003c\/li\u003e\n\u003cli\u003eAt or near race speed engage brake pedal to slow car without coming to a complete stop. Release pedal quickly and do not drag brakes. Repeat three times. Allow a few seconds between brake engagements while car is in motion.\u003c\/li\u003e\n\u003cli\u003eDo not hold brake pedal. Park car for approximately 20 minutes or until brake rotors are completely cool to the touch.\u003c\/li\u003e\n\u003cli\u003eIf during the above steps the brake pedal becomes soft or brake fade is noticed, park the car immediately for approximately 20 minutes. Do not hold brake pedal.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eImportant Reminders when Burnishing or Bedding Brake Pads\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eDo not attempt to use badly worn or damaged rotors with new brake pads.\u003c\/li\u003e\n\u003cli\u003eDo not drag brakes while car is moving during break-in procedure.\u003c\/li\u003e\n\u003cli\u003eDo not engage pedal while car is stopped at any time following the break-in procedure.\u003c\/li\u003e\n\u003cli\u003eUpon completing the procedure, allow the brake system to completely cool before racing.\u003c\/li\u003e\n\u003cli\u003eApplying the pedal a few times before the start of the race will allow the brake pads to heat up before attempting to reach race speeds.\u003c\/li\u003e\nli\u0026gt;Clean a used rotor surface with fine sand paper or steel wool, rinse with water, dry and install before bedding new pads\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"HAWK Performance","offers":[{"title":"Default Title","offer_id":47787070292264,"sku":"HWK-HB667G.622","price":418.8,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/5767\/7352\/files\/hawk-performance-dtc-60-motorsports-brake-pads-front-hb667g-622-347.webp?v=1716858995"},{"product_id":"hawk-performance-dtc-60-motorsports-brake-pads-rear-hb290g-583","title":"HAWK Performance DTC-60 Motorsports Brake Pads Rear - HB290G.583","description":"\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cp\u003eRunning with extremely high deceleration rates and increased downforce poses different challenges, so Hawk designed DTC-60 race compound. Recommended with DTC-70 when split friction between axles is desired, it has excellent modulation and release characteristics.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cp\u003eDTC-60 has the same temperature range as DTC-70, but produces less brake torque. Many racers of lighter, smaller cars such as the Miata and S2000 will run DTC-60 Front and DTC-30 Rear. On larger, heavier, cars such as Corvettes, Mustangs, Porsches, BMWs and other specialty race cars, the DTC-60 is run on the rear with DTC-70 up front. This is not an entry level race compound and should not be driven on the street. Use when you are a serious racer with track experience and have had issues with less aggressive compounds overheating or not providing enough bite.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003eSuperior Release and Torque Control\u003c\/li\u003e\n\u003cli\u003eVery Low Pad and Rotor Wear\u003c\/li\u003e\n\u003cli\u003eHigh Torque\u003c\/li\u003e\n\u003cli\u003eExcellent Modulation and Release Characteristics\u003c\/li\u003e\n\u003cli\u003eApplicable to NASCAR, NASCAR modified, ARCA, Super Late models, pavement circle track, Pro 2, Pro 4 Off Road Trucks, Pro Lite, Sports Car, GT, GS, Open Wheel, Formula, Monster Trucks\u003c\/li\u003e\n\u003cli\u003eStable Friction Output\u003c\/li\u003e\n\u003cli\u003e400-1600 Deg F Operating Temperature Range\u003c\/li\u003e\n\u003cli\u003e600-1200 Deg F Optimal Temperature Range\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eFor motorsport use only. Image is for illustative purposes, actual product may differ.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003ch3\u003eHawk Brake Pad Installation Procedure\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eInstall Brake pads properly. Be sure pads are securely positioned in the caliper.\u003c\/li\u003e\n\u003cli\u003eFlush system with fresh brake fluid.\u003c\/li\u003e\n\u003cli\u003eCheck all hydraulic parts for excess wear and tear.\u003c\/li\u003e\n\u003cli\u003eCheck disc for proper thickness, parallelism, and lateral run-out.\u003c\/li\u003e\n\u003cli\u003eCheck disc for scoring or grooves over .012\"\" depth. If either applies, resurfacing or replacement is required.\u003c\/li\u003e\n\u003cli\u003eIf disc does not need resurfacing then contamination from the previous brake pads must be removed. Sand discs with Garnet sandpaper using moderate pressure. Use soap and water to clean off disc surface after sanding and machining. Discs should be free and clear of oil, grease, and brake fluid\u003c\/li\u003e\n\u003cli\u003eInspect calipers for freedom of movement. Lubricate where necessary\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eHawk Brake Pad Bedding Procedure - Motorsports Pads\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAfter reaching medium speed engage brake pedal to slow car without coming to a complete stop. Release pedal quickly and do not drag brakes. Repeat four or five times.\u003c\/li\u003e\n\u003cli\u003eAt higher speeds engage brake pedal to slow car without coming to a complete stop. Release pedal quickly and do not drag brakes. Repeat five times.\u003c\/li\u003e\n\u003cli\u003eAt or near race speed engage brake pedal to slow car without coming to a complete stop. Release pedal quickly and do not drag brakes. Repeat three times. Allow a few seconds between brake engagements while car is in motion.\u003c\/li\u003e\n\u003cli\u003eDo not hold brake pedal. Park car for approximately 20 minutes or until brake rotors are completely cool to the touch.\u003c\/li\u003e\n\u003cli\u003eIf during the above steps the brake pedal becomes soft or brake fade is noticed, park the car immediately for approximately 20 minutes. Do not hold brake pedal.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eImportant Reminders when Burnishing or Bedding Brake Pads\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eDo not attempt to use badly worn or damaged rotors with new brake pads.\u003c\/li\u003e\n\u003cli\u003eDo not drag brakes while car is moving during break-in procedure.\u003c\/li\u003e\n\u003cli\u003eDo not engage pedal while car is stopped at any time following the break-in procedure.\u003c\/li\u003e\n\u003cli\u003eUpon completing the procedure, allow the brake system to completely cool before racing.\u003c\/li\u003e\n\u003cli\u003eApplying the pedal a few times before the start of the race will allow the brake pads to heat up before attempting to reach race speeds.\u003c\/li\u003e\nli\u0026gt;Clean a used rotor surface with fine sand paper or steel wool, rinse with water, dry and install before bedding new pads\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"HAWK Performance","offers":[{"title":"Default Title","offer_id":47787075207464,"sku":"HWK-HB290G.583","price":371.64,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/5767\/7352\/files\/hawk-performance-dtc-60-motorsports-brake-pads-rear-hb290g-583-929.webp?v=1716860280"},{"product_id":"hawk-performance-dtc-70-motorsports-brake-pads-front-hb291u-642","title":"HAWK Performance DTC-70 Motorsports Brake Pads Front - HB291U.642","description":"\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cp\u003eThe Hawk DTC-70 race compound was engineered with extremely high torque and highly aggressive initial bite for cars with high deceleration rates, with or without downforce. With superior release and control characteristics, it's a winning race solution on its own or as split friction with DTC-60.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cp\u003eDTC-70 is more aggressive than the DTC-60 but has the same temperature range. Many racers of Corvettes, Mustangs, Porsches, BMWs and other specialty race cars choose to run DTC-70 Front and DTC-60 rear. This is not an entry level race compound and should not be driven on the street. Use when you are a serious racer with track experience and have had issues with less aggressive compounds overheating or not providing enough bite.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003eHigh Performance\u003c\/li\u003e\n\u003cli\u003eHigh Torque\u003c\/li\u003e\n\u003cli\u003eSuperior Rotor and Pad Wear\u003c\/li\u003e\n\u003cli\u003eExcellent Modulation and Release Characteristics\u003c\/li\u003e\n\u003cli\u003eApplicable to NASCAR, NASCAR modified, ARCA, Super Late models, pavement circle track, Pro 2, Pro 4 Off Road Trucks, Pro Lite, Sports Car, GT, GS, Open Wheel, Formula, Monster Trucks\u003c\/li\u003e\n\u003cli\u003eStable Friction Output\u003c\/li\u003e\n\u003cli\u003e400-1600 Deg F Operating Temperature Range\u003c\/li\u003e\n\u003cli\u003e600-1200 Deg F Optimal Temperature Range\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eFor motorsport use only. Image is for illustative purposes, actual product may differ.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003ch3\u003eHawk Brake Pad Installation Procedure\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eInstall Brake pads properly. Be sure pads are securely positioned in the caliper.\u003c\/li\u003e\n\u003cli\u003eFlush system with fresh brake fluid.\u003c\/li\u003e\n\u003cli\u003eCheck all hydraulic parts for excess wear and tear.\u003c\/li\u003e\n\u003cli\u003eCheck disc for proper thickness, parallelism, and lateral run-out.\u003c\/li\u003e\n\u003cli\u003eCheck disc for scoring or grooves over .012\"\" depth. If either applies, resurfacing or replacement is required.\u003c\/li\u003e\n\u003cli\u003eIf disc does not need resurfacing then contamination from the previous brake pads must be removed. Sand discs with Garnet sandpaper using moderate pressure. Use soap and water to clean off disc surface after sanding and machining. Discs should be free and clear of oil, grease, and brake fluid\u003c\/li\u003e\n\u003cli\u003eInspect calipers for freedom of movement. Lubricate where necessary\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eHawk Brake Pad Bedding Procedure - Motorsports Pads\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAfter reaching medium speed engage brake pedal to slow car without coming to a complete stop. Release pedal quickly and do not drag brakes. Repeat four or five times.\u003c\/li\u003e\n\u003cli\u003eAt higher speeds engage brake pedal to slow car without coming to a complete stop. Release pedal quickly and do not drag brakes. Repeat five times.\u003c\/li\u003e\n\u003cli\u003eAt or near race speed engage brake pedal to slow car without coming to a complete stop. Release pedal quickly and do not drag brakes. Repeat three times. Allow a few seconds between brake engagements while car is in motion.\u003c\/li\u003e\n\u003cli\u003eDo not hold brake pedal. Park car for approximately 20 minutes or until brake rotors are completely cool to the touch.\u003c\/li\u003e\n\u003cli\u003eIf during the above steps the brake pedal becomes soft or brake fade is noticed, park the car immediately for approximately 20 minutes. Do not hold brake pedal.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eImportant Reminders when Burnishing or Bedding Brake Pads\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eDo not attempt to use badly worn or damaged rotors with new brake pads.\u003c\/li\u003e\n\u003cli\u003eDo not drag brakes while car is moving during break-in procedure.\u003c\/li\u003e\n\u003cli\u003eDo not engage pedal while car is stopped at any time following the break-in procedure.\u003c\/li\u003e\n\u003cli\u003eUpon completing the procedure, allow the brake system to completely cool before racing.\u003c\/li\u003e\n\u003cli\u003eApplying the pedal a few times before the start of the race will allow the brake pads to heat up before attempting to reach race speeds.\u003c\/li\u003e\nli\u0026gt;Clean a used rotor surface with fine sand paper or steel wool, rinse with water, dry and install before bedding new pads\n\u003cli\u003eSome forms of racing do not allow time for the proper break-in procedure to be performed. However, it is still very important to attempt to perform at least the core of the procedure: Build up heat slowly and allow the system to completely cool down before racing if possible.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"HAWK Performance","offers":[{"title":"Default Title","offer_id":47787095097640,"sku":"HWK-HB291U.642","price":379.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/5767\/7352\/files\/hawk-performance-dtc-70-motorsports-brake-pads-front-hb291u-642-249.webp?v=1716863401"},{"product_id":"hawk-performance-dtc-70-motorsports-brake-pads-front-hb483u-635","title":"HAWK Performance DTC-70 Motorsports Brake Pads Front - HB483U.635","description":"\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cp\u003eThe Hawk DTC-70 race compound was engineered with extremely high torque and highly aggressive initial bite for cars with high deceleration rates, with or without downforce. With superior release and control characteristics, it's a winning race solution on its own or as split friction with DTC-60.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cp\u003eDTC-70 is more aggressive than the DTC-60 but has the same temperature range. Many racers of Corvettes, Mustangs, Porsches, BMWs and other specialty race cars choose to run DTC-70 Front and DTC-60 rear. This is not an entry level race compound and should not be driven on the street. Use when you are a serious racer with track experience and have had issues with less aggressive compounds overheating or not providing enough bite.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003eHigh Performance\u003c\/li\u003e\n\u003cli\u003eHigh Torque\u003c\/li\u003e\n\u003cli\u003eSuperior Rotor and Pad Wear\u003c\/li\u003e\n\u003cli\u003eExcellent Modulation and Release Characteristics\u003c\/li\u003e\n\u003cli\u003eApplicable to NASCAR, NASCAR modified, ARCA, Super Late models, pavement circle track, Pro 2, Pro 4 Off Road Trucks, Pro Lite, Sports Car, GT, GS, Open Wheel, Formula, Monster Trucks\u003c\/li\u003e\n\u003cli\u003eStable Friction Output\u003c\/li\u003e\n\u003cli\u003e400-1600 Deg F Operating Temperature Range\u003c\/li\u003e\n\u003cli\u003e600-1200 Deg F Optimal Temperature Range\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eFor motorsport use only. Image is for illustative purposes, actual product may differ.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003ch3\u003eHawk Brake Pad Installation Procedure\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eInstall Brake pads properly. Be sure pads are securely positioned in the caliper.\u003c\/li\u003e\n\u003cli\u003eFlush system with fresh brake fluid.\u003c\/li\u003e\n\u003cli\u003eCheck all hydraulic parts for excess wear and tear.\u003c\/li\u003e\n\u003cli\u003eCheck disc for proper thickness, parallelism, and lateral run-out.\u003c\/li\u003e\n\u003cli\u003eCheck disc for scoring or grooves over .012\"\" depth. If either applies, resurfacing or replacement is required.\u003c\/li\u003e\n\u003cli\u003eIf disc does not need resurfacing then contamination from the previous brake pads must be removed. Sand discs with Garnet sandpaper using moderate pressure. Use soap and water to clean off disc surface after sanding and machining. Discs should be free and clear of oil, grease, and brake fluid\u003c\/li\u003e\n\u003cli\u003eInspect calipers for freedom of movement. Lubricate where necessary\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eHawk Brake Pad Bedding Procedure - Motorsports Pads\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAfter reaching medium speed engage brake pedal to slow car without coming to a complete stop. Release pedal quickly and do not drag brakes. Repeat four or five times.\u003c\/li\u003e\n\u003cli\u003eAt higher speeds engage brake pedal to slow car without coming to a complete stop. Release pedal quickly and do not drag brakes. Repeat five times.\u003c\/li\u003e\n\u003cli\u003eAt or near race speed engage brake pedal to slow car without coming to a complete stop. Release pedal quickly and do not drag brakes. Repeat three times. Allow a few seconds between brake engagements while car is in motion.\u003c\/li\u003e\n\u003cli\u003eDo not hold brake pedal. Park car for approximately 20 minutes or until brake rotors are completely cool to the touch.\u003c\/li\u003e\n\u003cli\u003eIf during the above steps the brake pedal becomes soft or brake fade is noticed, park the car immediately for approximately 20 minutes. Do not hold brake pedal.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eImportant Reminders when Burnishing or Bedding Brake Pads\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eDo not attempt to use badly worn or damaged rotors with new brake pads.\u003c\/li\u003e\n\u003cli\u003eDo not drag brakes while car is moving during break-in procedure.\u003c\/li\u003e\n\u003cli\u003eDo not engage pedal while car is stopped at any time following the break-in procedure.\u003c\/li\u003e\n\u003cli\u003eUpon completing the procedure, allow the brake system to completely cool before racing.\u003c\/li\u003e\n\u003cli\u003eApplying the pedal a few times before the start of the race will allow the brake pads to heat up before attempting to reach race speeds.\u003c\/li\u003e\nli\u0026gt;Clean a used rotor surface with fine sand paper or steel wool, rinse with water, dry and install before bedding new pads\n\u003cli\u003eSome forms of racing do not allow time for the proper break-in procedure to be performed. However, it is still very important to attempt to perform at least the core of the procedure: Build up heat slowly and allow the system to completely cool down before racing if possible.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"HAWK Performance","offers":[{"title":"Default Title","offer_id":47787096736040,"sku":"HWK-HB483U.635","price":549.26,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/5767\/7352\/files\/hawk-performance-dtc-70-motorsports-brake-pads-front-hb483u-635-242.webp?v=1716863675"},{"product_id":"hawk-performance-dtc-70-motorsports-brake-pads-front-hb550u-634","title":"HAWK Performance DTC-70 Motorsports Brake Pads Front - HB550U.634","description":"\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cp\u003eThe Hawk DTC-70 race compound was engineered with extremely high torque and highly aggressive initial bite for cars with high deceleration rates, with or without downforce. With superior release and control characteristics, it's a winning race solution on its own or as split friction with DTC-60.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cp\u003eDTC-70 is more aggressive than the DTC-60 but has the same temperature range. Many racers of Corvettes, Mustangs, Porsches, BMWs and other specialty race cars choose to run DTC-70 Front and DTC-60 rear. This is not an entry level race compound and should not be driven on the street. Use when you are a serious racer with track experience and have had issues with less aggressive compounds overheating or not providing enough bite.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003eHigh Performance\u003c\/li\u003e\n\u003cli\u003eHigh Torque\u003c\/li\u003e\n\u003cli\u003eSuperior Rotor and Pad Wear\u003c\/li\u003e\n\u003cli\u003eExcellent Modulation and Release Characteristics\u003c\/li\u003e\n\u003cli\u003eApplicable to NASCAR, NASCAR modified, ARCA, Super Late models, pavement circle track, Pro 2, Pro 4 Off Road Trucks, Pro Lite, Sports Car, GT, GS, Open Wheel, Formula, Monster Trucks\u003c\/li\u003e\n\u003cli\u003eStable Friction Output\u003c\/li\u003e\n\u003cli\u003e400-1600 Deg F Operating Temperature Range\u003c\/li\u003e\n\u003cli\u003e600-1200 Deg F Optimal Temperature Range\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eFor motorsport use only. Image is for illustative purposes, actual product may differ.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003ch3\u003eHawk Brake Pad Installation Procedure\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eInstall Brake pads properly. Be sure pads are securely positioned in the caliper.\u003c\/li\u003e\n\u003cli\u003eFlush system with fresh brake fluid.\u003c\/li\u003e\n\u003cli\u003eCheck all hydraulic parts for excess wear and tear.\u003c\/li\u003e\n\u003cli\u003eCheck disc for proper thickness, parallelism, and lateral run-out.\u003c\/li\u003e\n\u003cli\u003eCheck disc for scoring or grooves over .012\"\" depth. If either applies, resurfacing or replacement is required.\u003c\/li\u003e\n\u003cli\u003eIf disc does not need resurfacing then contamination from the previous brake pads must be removed. Sand discs with Garnet sandpaper using moderate pressure. Use soap and water to clean off disc surface after sanding and machining. Discs should be free and clear of oil, grease, and brake fluid\u003c\/li\u003e\n\u003cli\u003eInspect calipers for freedom of movement. Lubricate where necessary\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eHawk Brake Pad Bedding Procedure - Motorsports Pads\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAfter reaching medium speed engage brake pedal to slow car without coming to a complete stop. Release pedal quickly and do not drag brakes. Repeat four or five times.\u003c\/li\u003e\n\u003cli\u003eAt higher speeds engage brake pedal to slow car without coming to a complete stop. Release pedal quickly and do not drag brakes. Repeat five times.\u003c\/li\u003e\n\u003cli\u003eAt or near race speed engage brake pedal to slow car without coming to a complete stop. Release pedal quickly and do not drag brakes. Repeat three times. Allow a few seconds between brake engagements while car is in motion.\u003c\/li\u003e\n\u003cli\u003eDo not hold brake pedal. Park car for approximately 20 minutes or until brake rotors are completely cool to the touch.\u003c\/li\u003e\n\u003cli\u003eIf during the above steps the brake pedal becomes soft or brake fade is noticed, park the car immediately for approximately 20 minutes. Do not hold brake pedal.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eImportant Reminders when Burnishing or Bedding Brake Pads\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eDo not attempt to use badly worn or damaged rotors with new brake pads.\u003c\/li\u003e\n\u003cli\u003eDo not drag brakes while car is moving during break-in procedure.\u003c\/li\u003e\n\u003cli\u003eDo not engage pedal while car is stopped at any time following the break-in procedure.\u003c\/li\u003e\n\u003cli\u003eUpon completing the procedure, allow the brake system to completely cool before racing.\u003c\/li\u003e\n\u003cli\u003eApplying the pedal a few times before the start of the race will allow the brake pads to heat up before attempting to reach race speeds.\u003c\/li\u003e\nli\u0026gt;Clean a used rotor surface with fine sand paper or steel wool, rinse with water, dry and install before bedding new pads\n\u003cli\u003eSome forms of racing do not allow time for the proper break-in procedure to be performed. However, it is still very important to attempt to perform at least the core of the procedure: Build up heat slowly and allow the system to completely cool down before racing if possible.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"HAWK Performance","offers":[{"title":"Default Title","offer_id":47787098013992,"sku":"HWK-HB550U.634","price":439.62,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/5767\/7352\/files\/hawk-performance-dtc-70-motorsports-brake-pads-front-hb550u-634-642.webp?v=1716863974"},{"product_id":"hawk-performance-dtc-70-motorsports-brake-pads-front-hb667u-622","title":"HAWK Performance DTC-70 Motorsports Brake Pads Front - HB667U.622","description":"\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cp\u003eThe Hawk DTC-70 race compound was engineered with extremely high torque and highly aggressive initial bite for cars with high deceleration rates, with or without downforce. With superior release and control characteristics, it's a winning race solution on its own or as split friction with DTC-60.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cp\u003eDTC-70 is more aggressive than the DTC-60 but has the same temperature range. Many racers of Corvettes, Mustangs, Porsches, BMWs and other specialty race cars choose to run DTC-70 Front and DTC-60 rear. This is not an entry level race compound and should not be driven on the street. Use when you are a serious racer with track experience and have had issues with less aggressive compounds overheating or not providing enough bite.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003eHigh Performance\u003c\/li\u003e\n\u003cli\u003eHigh Torque\u003c\/li\u003e\n\u003cli\u003eSuperior Rotor and Pad Wear\u003c\/li\u003e\n\u003cli\u003eExcellent Modulation and Release Characteristics\u003c\/li\u003e\n\u003cli\u003eApplicable to NASCAR, NASCAR modified, ARCA, Super Late models, pavement circle track, Pro 2, Pro 4 Off Road Trucks, Pro Lite, Sports Car, GT, GS, Open Wheel, Formula, Monster Trucks\u003c\/li\u003e\n\u003cli\u003eStable Friction Output\u003c\/li\u003e\n\u003cli\u003e400-1600 Deg F Operating Temperature Range\u003c\/li\u003e\n\u003cli\u003e600-1200 Deg F Optimal Temperature Range\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eFor motorsport use only. Image is for illustative purposes, actual product may differ.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003ch3\u003eHawk Brake Pad Installation Procedure\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eInstall Brake pads properly. Be sure pads are securely positioned in the caliper.\u003c\/li\u003e\n\u003cli\u003eFlush system with fresh brake fluid.\u003c\/li\u003e\n\u003cli\u003eCheck all hydraulic parts for excess wear and tear.\u003c\/li\u003e\n\u003cli\u003eCheck disc for proper thickness, parallelism, and lateral run-out.\u003c\/li\u003e\n\u003cli\u003eCheck disc for scoring or grooves over .012\"\" depth. If either applies, resurfacing or replacement is required.\u003c\/li\u003e\n\u003cli\u003eIf disc does not need resurfacing then contamination from the previous brake pads must be removed. Sand discs with Garnet sandpaper using moderate pressure. Use soap and water to clean off disc surface after sanding and machining. Discs should be free and clear of oil, grease, and brake fluid\u003c\/li\u003e\n\u003cli\u003eInspect calipers for freedom of movement. Lubricate where necessary\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eHawk Brake Pad Bedding Procedure - Motorsports Pads\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAfter reaching medium speed engage brake pedal to slow car without coming to a complete stop. Release pedal quickly and do not drag brakes. Repeat four or five times.\u003c\/li\u003e\n\u003cli\u003eAt higher speeds engage brake pedal to slow car without coming to a complete stop. Release pedal quickly and do not drag brakes. Repeat five times.\u003c\/li\u003e\n\u003cli\u003eAt or near race speed engage brake pedal to slow car without coming to a complete stop. Release pedal quickly and do not drag brakes. Repeat three times. Allow a few seconds between brake engagements while car is in motion.\u003c\/li\u003e\n\u003cli\u003eDo not hold brake pedal. Park car for approximately 20 minutes or until brake rotors are completely cool to the touch.\u003c\/li\u003e\n\u003cli\u003eIf during the above steps the brake pedal becomes soft or brake fade is noticed, park the car immediately for approximately 20 minutes. Do not hold brake pedal.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eImportant Reminders when Burnishing or Bedding Brake Pads\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eDo not attempt to use badly worn or damaged rotors with new brake pads.\u003c\/li\u003e\n\u003cli\u003eDo not drag brakes while car is moving during break-in procedure.\u003c\/li\u003e\n\u003cli\u003eDo not engage pedal while car is stopped at any time following the break-in procedure.\u003c\/li\u003e\n\u003cli\u003eUpon completing the procedure, allow the brake system to completely cool before racing.\u003c\/li\u003e\n\u003cli\u003eApplying the pedal a few times before the start of the race will allow the brake pads to heat up before attempting to reach race speeds.\u003c\/li\u003e\nli\u0026gt;Clean a used rotor surface with fine sand paper or steel wool, rinse with water, dry and install before bedding new pads\n\u003cli\u003eSome forms of racing do not allow time for the proper break-in procedure to be performed. However, it is still very important to attempt to perform at least the core of the procedure: Build up heat slowly and allow the system to completely cool down before racing if possible.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"HAWK Performance","offers":[{"title":"Default Title","offer_id":47787100143912,"sku":"HWK-HB667U.622","price":440.72,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/5767\/7352\/files\/hawk-performance-dtc-70-motorsports-brake-pads-front-hb667u-622-495.webp?v=1716864244"},{"product_id":"hawk-performance-dtc-70-motorsports-brake-pads-rear-hb290u-583","title":"HAWK Performance DTC-70 Motorsports Brake Pads Rear - HB290U.583","description":"\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cp\u003eThe Hawk DTC-70 race compound was engineered with extremely high torque and highly aggressive initial bite for cars with high deceleration rates, with or without downforce. With superior release and control characteristics, it's a winning race solution on its own or as split friction with DTC-60.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cp\u003eDTC-70 is more aggressive than the DTC-60 but has the same temperature range. Many racers of Corvettes, Mustangs, Porsches, BMWs and other specialty race cars choose to run DTC-70 Front and DTC-60 rear. This is not an entry level race compound and should not be driven on the street. Use when you are a serious racer with track experience and have had issues with less aggressive compounds overheating or not providing enough bite.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003eHigh Performance\u003c\/li\u003e\n\u003cli\u003eHigh Torque\u003c\/li\u003e\n\u003cli\u003eSuperior Rotor and Pad Wear\u003c\/li\u003e\n\u003cli\u003eExcellent Modulation and Release Characteristics\u003c\/li\u003e\n\u003cli\u003eApplicable to NASCAR, NASCAR modified, ARCA, Super Late models, pavement circle track, Pro 2, Pro 4 Off Road Trucks, Pro Lite, Sports Car, GT, GS, Open Wheel, Formula, Monster Trucks\u003c\/li\u003e\n\u003cli\u003eStable Friction Output\u003c\/li\u003e\n\u003cli\u003e400-1600 Deg F Operating Temperature Range\u003c\/li\u003e\n\u003cli\u003e600-1200 Deg F Optimal Temperature Range\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eFor motorsport use only. Image is for illustative purposes, actual product may differ.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003ch3\u003eHawk Brake Pad Installation Procedure\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eInstall Brake pads properly. Be sure pads are securely positioned in the caliper.\u003c\/li\u003e\n\u003cli\u003eFlush system with fresh brake fluid.\u003c\/li\u003e\n\u003cli\u003eCheck all hydraulic parts for excess wear and tear.\u003c\/li\u003e\n\u003cli\u003eCheck disc for proper thickness, parallelism, and lateral run-out.\u003c\/li\u003e\n\u003cli\u003eCheck disc for scoring or grooves over .012\"\" depth. If either applies, resurfacing or replacement is required.\u003c\/li\u003e\n\u003cli\u003eIf disc does not need resurfacing then contamination from the previous brake pads must be removed. Sand discs with Garnet sandpaper using moderate pressure. Use soap and water to clean off disc surface after sanding and machining. Discs should be free and clear of oil, grease, and brake fluid\u003c\/li\u003e\n\u003cli\u003eInspect calipers for freedom of movement. Lubricate where necessary\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eHawk Brake Pad Bedding Procedure - Motorsports Pads\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAfter reaching medium speed engage brake pedal to slow car without coming to a complete stop. Release pedal quickly and do not drag brakes. Repeat four or five times.\u003c\/li\u003e\n\u003cli\u003eAt higher speeds engage brake pedal to slow car without coming to a complete stop. Release pedal quickly and do not drag brakes. Repeat five times.\u003c\/li\u003e\n\u003cli\u003eAt or near race speed engage brake pedal to slow car without coming to a complete stop. Release pedal quickly and do not drag brakes. Repeat three times. Allow a few seconds between brake engagements while car is in motion.\u003c\/li\u003e\n\u003cli\u003eDo not hold brake pedal. Park car for approximately 20 minutes or until brake rotors are completely cool to the touch.\u003c\/li\u003e\n\u003cli\u003eIf during the above steps the brake pedal becomes soft or brake fade is noticed, park the car immediately for approximately 20 minutes. Do not hold brake pedal.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eImportant Reminders when Burnishing or Bedding Brake Pads\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eDo not attempt to use badly worn or damaged rotors with new brake pads.\u003c\/li\u003e\n\u003cli\u003eDo not drag brakes while car is moving during break-in procedure.\u003c\/li\u003e\n\u003cli\u003eDo not engage pedal while car is stopped at any time following the break-in procedure.\u003c\/li\u003e\n\u003cli\u003eUpon completing the procedure, allow the brake system to completely cool before racing.\u003c\/li\u003e\n\u003cli\u003eApplying the pedal a few times before the start of the race will allow the brake pads to heat up before attempting to reach race speeds.\u003c\/li\u003e\nli\u0026gt;Clean a used rotor surface with fine sand paper or steel wool, rinse with water, dry and install before bedding new pads\n\u003cli\u003eSome forms of racing do not allow time for the proper break-in procedure to be performed. However, it is still very important to attempt to perform at least the core of the procedure: Build up heat slowly and allow the system to completely cool down before racing if possible.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"HAWK Performance","offers":[{"title":"Default Title","offer_id":47787106926888,"sku":"HWK-HB290U.583","price":388.08,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/5767\/7352\/files\/hawk-performance-dtc-70-motorsports-brake-pads-rear-hb290u-583-789.webp?v=1716865206"},{"product_id":"hawk-performance-dtc-80-motorsports-brake-pads-front-hb483q-635","title":"HAWK Performance DTC-80 Motorsports Brake Pads Front - HB483Q.635","description":"\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cp\u003eHawk Performance products have dominated motorsports for more than 25 years, and this revolutionary compound is taking that domination to a new level. Intended for the hardest braking circuits where the most demanding brake products are required, Hawk DTC-80 is a compound engineered for use on all circle track and road racing venues where a high torque, high temperature-resilient friction material is a must. With a formulated flat coefficient of friction at high temperature levels, DTC-80 provides consistent performance corner after corner. Track tested and proven effective, this formulation offers lower wear rates and higher torque values than other competitive materials on the market today. The end results are better car control, more confident brake zone feel, and stunningly predictable performance.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cp\u003eThe DTC-80 has a higher temperature and generates more brake torque than the DTC-70. If you have been over-heating the DTC-70 or it is not giving you the torque you need, give the DTC-80 a try.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003eHigh Initial Bite\u003c\/li\u003e\n\u003cli\u003eHigh Torque\u003c\/li\u003e\n\u003cli\u003eConsistent Brake Torque over Temperature Range\u003c\/li\u003e\n\u003cli\u003eSuperior pad and Rotor Wear\u003c\/li\u003e\n\u003cli\u003eApplicable to NASCAR, NASCAR modified, ARCA, Super Late models, pavement circle track, Pro 2, Pro 4 Off Road Trucks, Pro Lite, Sports Car, GT, GS, Open Wheel, Formula, Monster Trucks\u003c\/li\u003e\n\u003cli\u003e500-1700 Deg F Operating Temperature Range\u003c\/li\u003e\n\u003cli\u003e600-1500 Deg F Optimal Temperature Range\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eFor motorsport use only. Image is for illustative purposes, actual product may differ.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003ch3\u003eHawk Brake Pad Installation Procedure\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eInstall Brake pads properly. Be sure pads are securely positioned in the caliper.\u003c\/li\u003e\n\u003cli\u003eFlush system with fresh brake fluid.\u003c\/li\u003e\n\u003cli\u003eCheck all hydraulic parts for excess wear and tear.\u003c\/li\u003e\n\u003cli\u003eCheck disc for proper thickness, parallelism, and lateral run-out.\u003c\/li\u003e\n\u003cli\u003eCheck disc for scoring or grooves over .012\"\" depth. If either applies, resurfacing or replacement is required.\u003c\/li\u003e\n\u003cli\u003eIf disc does not need resurfacing then contamination from the previous brake pads must be removed. Sand discs with Garnet sandpaper using moderate pressure. Use soap and water to clean off disc surface after sanding and machining. Discs should be free and clear of oil, grease, and brake fluid\u003c\/li\u003e\n\u003cli\u003eInspect calipers for freedom of movement. Lubricate where necessary\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eHawk Brake Pad Bedding Procedure - Motorsports Pads\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAfter reaching medium speed engage brake pedal to slow car without coming to a complete stop. Release pedal quickly and do not drag brakes. Repeat four or five times.\u003c\/li\u003e\n\u003cli\u003eAt higher speeds engage brake pedal to slow car without coming to a complete stop. Release pedal quickly and do not drag brakes. Repeat five times.\u003c\/li\u003e\n\u003cli\u003eAt or near race speed engage brake pedal to slow car without coming to a complete stop. Release pedal quickly and do not drag brakes. Repeat three times. Allow a few seconds between brake engagements while car is in motion.\u003c\/li\u003e\n\u003cli\u003eDo not hold brake pedal. Park car for approximately 20 minutes or until brake rotors are completely cool to the touch.\u003c\/li\u003e\n\u003cli\u003eIf during the above steps the brake pedal becomes soft or brake fade is noticed, park the car immediately for approximately 20 minutes. Do not hold brake pedal.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eImportant Reminders when Burnishing or Bedding Brake Pads\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eDo not attempt to use badly worn or damaged rotors with new brake pads.\u003c\/li\u003e\n\u003cli\u003eDo not drag brakes while car is moving during break-in procedure.\u003c\/li\u003e\n\u003cli\u003eDo not engage pedal while car is stopped at any time following the break-in procedure.\u003c\/li\u003e\n\u003cli\u003eUpon completing the procedure, allow the brake system to completely cool before racing.\u003c\/li\u003e\n\u003cli\u003eApplying the pedal a few times before the start of the race will allow the brake pads to heat up before attempting to reach race speeds.\u003c\/li\u003e\nli\u0026gt;Clean a used rotor surface with fine sand paper or steel wool, rinse with water, dry and install before bedding new pads\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"HAWK Performance","offers":[{"title":"Default Title","offer_id":47790909456680,"sku":"HWK-HB483Q.635","price":672.04,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/5767\/7352\/files\/hawk-performance-dtc-80-motorsports-brake-pads-front-hb483q-635-886.webp?v=1716866776"},{"product_id":"hawk-performance-dtc-80-motorsports-brake-pads-front-hb550q-634","title":"HAWK Performance DTC-80 Motorsports Brake Pads Front - HB550Q.634","description":"\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cp\u003eHawk Performance products have dominated motorsports for more than 25 years, and this revolutionary compound is taking that domination to a new level. Intended for the hardest braking circuits where the most demanding brake products are required, Hawk DTC-80 is a compound engineered for use on all circle track and road racing venues where a high torque, high temperature-resilient friction material is a must. With a formulated flat coefficient of friction at high temperature levels, DTC-80 provides consistent performance corner after corner. Track tested and proven effective, this formulation offers lower wear rates and higher torque values than other competitive materials on the market today. The end results are better car control, more confident brake zone feel, and stunningly predictable performance.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cp\u003eThe DTC-80 has a higher temperature and generates more brake torque than the DTC-70. If you have been over-heating the DTC-70 or it is not giving you the torque you need, give the DTC-80 a try.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003eHigh Initial Bite\u003c\/li\u003e\n\u003cli\u003eHigh Torque\u003c\/li\u003e\n\u003cli\u003eConsistent Brake Torque over Temperature Range\u003c\/li\u003e\n\u003cli\u003eSuperior pad and Rotor Wear\u003c\/li\u003e\n\u003cli\u003eApplicable to NASCAR, NASCAR modified, ARCA, Super Late models, pavement circle track, Pro 2, Pro 4 Off Road Trucks, Pro Lite, Sports Car, GT, GS, Open Wheel, Formula, Monster Trucks\u003c\/li\u003e\n\u003cli\u003e500-1700 Deg F Operating Temperature Range\u003c\/li\u003e\n\u003cli\u003e600-1500 Deg F Optimal Temperature Range\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eFor motorsport use only. Image is for illustative purposes, actual product may differ.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003ch3\u003eHawk Brake Pad Installation Procedure\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eInstall Brake pads properly. Be sure pads are securely positioned in the caliper.\u003c\/li\u003e\n\u003cli\u003eFlush system with fresh brake fluid.\u003c\/li\u003e\n\u003cli\u003eCheck all hydraulic parts for excess wear and tear.\u003c\/li\u003e\n\u003cli\u003eCheck disc for proper thickness, parallelism, and lateral run-out.\u003c\/li\u003e\n\u003cli\u003eCheck disc for scoring or grooves over .012\"\" depth. If either applies, resurfacing or replacement is required.\u003c\/li\u003e\n\u003cli\u003eIf disc does not need resurfacing then contamination from the previous brake pads must be removed. Sand discs with Garnet sandpaper using moderate pressure. Use soap and water to clean off disc surface after sanding and machining. Discs should be free and clear of oil, grease, and brake fluid\u003c\/li\u003e\n\u003cli\u003eInspect calipers for freedom of movement. Lubricate where necessary\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eHawk Brake Pad Bedding Procedure - Motorsports Pads\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAfter reaching medium speed engage brake pedal to slow car without coming to a complete stop. Release pedal quickly and do not drag brakes. Repeat four or five times.\u003c\/li\u003e\n\u003cli\u003eAt higher speeds engage brake pedal to slow car without coming to a complete stop. Release pedal quickly and do not drag brakes. Repeat five times.\u003c\/li\u003e\n\u003cli\u003eAt or near race speed engage brake pedal to slow car without coming to a complete stop. Release pedal quickly and do not drag brakes. Repeat three times. Allow a few seconds between brake engagements while car is in motion.\u003c\/li\u003e\n\u003cli\u003eDo not hold brake pedal. Park car for approximately 20 minutes or until brake rotors are completely cool to the touch.\u003c\/li\u003e\n\u003cli\u003eIf during the above steps the brake pedal becomes soft or brake fade is noticed, park the car immediately for approximately 20 minutes. Do not hold brake pedal.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eImportant Reminders when Burnishing or Bedding Brake Pads\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eDo not attempt to use badly worn or damaged rotors with new brake pads.\u003c\/li\u003e\n\u003cli\u003eDo not drag brakes while car is moving during break-in procedure.\u003c\/li\u003e\n\u003cli\u003eDo not engage pedal while car is stopped at any time following the break-in procedure.\u003c\/li\u003e\n\u003cli\u003eUpon completing the procedure, allow the brake system to completely cool before racing.\u003c\/li\u003e\n\u003cli\u003eApplying the pedal a few times before the start of the race will allow the brake pads to heat up before attempting to reach race speeds.\u003c\/li\u003e\nli\u0026gt;Clean a used rotor surface with fine sand paper or steel wool, rinse with water, dry and install before bedding new pads\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"HAWK Performance","offers":[{"title":"Default Title","offer_id":47790909686056,"sku":"HWK-HB550Q.634","price":431.57,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/5767\/7352\/files\/hawk-performance-dtc-80-motorsports-brake-pads-front-hb550q-634-125.webp?v=1716866890"},{"product_id":"hawk-performance-er-1-motorsports-brake-pads-front-hb483d-635","title":"HAWK Performance ER-1 Motorsports Brake Pads Front - HB483D.635","description":"\u003cp\u003eER-1 has been developed by Hawk Performance for the endurance racing market with a simple goal; offer a higher coefficient of friction than competing endurance pads while maintaining matched or improved lifespan. Years of testing across America’s most prestigious races has resulted in a well-rounded compound that offers ideal modulation and pedal communication, with ground breaking friction stability across a thermal range as high as 1,600°F. This consistency of performance, hour after hour, makes it ideal for not only endurance racing, but HPDE, track days, time trials and even sprint racing.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSuperior Pad \u0026amp; Rotor wear\u003c\/li\u003e\n\u003cli\u003eConsistent medium-to-high friction\u003c\/li\u003e\n\u003cli\u003eSpecific emphasis on modulation, release and pedal communication\u003c\/li\u003e\n\u003cli\u003eIdeal for light-to-medium weight vehicles in HPDE, Track Day events, Time Trials, or Endurance Racing\u003c\/li\u003e\n\u003cli\u003eHigher coefficient of friction than competing endurance pads, wtih matched or improved lifespan\u003c\/li\u003e\n\u003cli\u003eAll Hawk Performance compounds are not compatible with carbon ceramic rotors. Hawk pads are designed to work with Iron\/Metal rotors\u003c\/li\u003e\n\u003cli\u003eMedium to High torque\u003c\/li\u003e\n\u003cli\u003e400-1600 F operating temperatures\u003c\/li\u003e\n\u003cli\u003e700-1100 F optimal temperatures\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eImage is for illustative purposes, actual product may differ.\u003c\/p\u003e\n\u003ch3\u003eLimited Lifetime Warranty\u003c\/h3\u003e\n\u003cp\u003eCarlisle Brake \u0026amp; Friction (CBF) warrants Hawk Performance branded products to be free of defects from workmanship and materials. This warranty does not apply to normal wear or damage caused by negligence, lack of maintenance, accident, abnormal operations, or improper installation or service. CBF does not make any other warranty claims, either expressed or implied, including the implied warranties of merchantability or fitness for a particular purpose. In no event will CBF\/Hawk Performance be liable for incidental or consequential damages of any kind, whether such damages are claimed on account of breach of warranty, breach of contract, negligence, or strict product liability. This includes without limitation, damage to property, or other economic losses that may be incurred. Any, and all, warranty claims must be processed through CBF. All valid warranty claims will be replaced and\/or reimbursed with Hawk Performance branded products of equal or greater value.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e* Disclaimer to Limited Life-Time Warranty: Motorsports brake pads and rotors are developed for high performance events. Racing is a dangerous sport. Hawk Performance racing brake pads and rotors are sold without warranty expressed or implied. No warranty or representation is made as to this products ability to protect the user from injury or death. The user assumes that risk.\u003c\/strong\u003e\u003c\/p\u003e","brand":"HAWK Performance","offers":[{"title":"Default Title","offer_id":47790916895016,"sku":"HWK-HB483D.635","price":505.4,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/5767\/7352\/files\/hawk-performance-er-1-motorsports-brake-pads-front-hb483d-635-388.webp?v=1716869351"},{"product_id":"hawk-performance-er-1-motorsports-brake-pads-front-hb550d-634","title":"HAWK Performance ER-1 Motorsports Brake Pads Front - HB550D.634","description":"\u003cp\u003eER-1 has been developed by Hawk Performance for the endurance racing market with a simple goal; offer a higher coefficient of friction than competing endurance pads while maintaining matched or improved lifespan. Years of testing across America’s most prestigious races has resulted in a well-rounded compound that offers ideal modulation and pedal communication, with ground breaking friction stability across a thermal range as high as 1,600°F. This consistency of performance, hour after hour, makes it ideal for not only endurance racing, but HPDE, track days, time trials and even sprint racing.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSuperior Pad \u0026amp; Rotor wear\u003c\/li\u003e\n\u003cli\u003eConsistent medium-to-high friction\u003c\/li\u003e\n\u003cli\u003eSpecific emphasis on modulation, release and pedal communication\u003c\/li\u003e\n\u003cli\u003eIdeal for light-to-medium weight vehicles in HPDE, Track Day events, Time Trials, or Endurance Racing\u003c\/li\u003e\n\u003cli\u003eHigher coefficient of friction than competing endurance pads, wtih matched or improved lifespan\u003c\/li\u003e\n\u003cli\u003eAll Hawk Performance compounds are not compatible with carbon ceramic rotors. Hawk pads are designed to work with Iron\/Metal rotors\u003c\/li\u003e\n\u003cli\u003eMedium to High torque\u003c\/li\u003e\n\u003cli\u003e400-1600 F operating temperatures\u003c\/li\u003e\n\u003cli\u003e700-1100 F optimal temperatures\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eImage is for illustative purposes, actual product may differ.\u003c\/p\u003e\n\u003ch3\u003eLimited Lifetime Warranty\u003c\/h3\u003e\n\u003cp\u003eCarlisle Brake \u0026amp; Friction (CBF) warrants Hawk Performance branded products to be free of defects from workmanship and materials. This warranty does not apply to normal wear or damage caused by negligence, lack of maintenance, accident, abnormal operations, or improper installation or service. CBF does not make any other warranty claims, either expressed or implied, including the implied warranties of merchantability or fitness for a particular purpose. In no event will CBF\/Hawk Performance be liable for incidental or consequential damages of any kind, whether such damages are claimed on account of breach of warranty, breach of contract, negligence, or strict product liability. This includes without limitation, damage to property, or other economic losses that may be incurred. Any, and all, warranty claims must be processed through CBF. All valid warranty claims will be replaced and\/or reimbursed with Hawk Performance branded products of equal or greater value.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e* Disclaimer to Limited Life-Time Warranty: Motorsports brake pads and rotors are developed for high performance events. Racing is a dangerous sport. Hawk Performance racing brake pads and rotors are sold without warranty expressed or implied. No warranty or representation is made as to this products ability to protect the user from injury or death. The user assumes that risk.\u003c\/strong\u003e\u003c\/p\u003e","brand":"HAWK Performance","offers":[{"title":"Default Title","offer_id":47790917321000,"sku":"HWK-HB550D.634","price":437.42,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/5767\/7352\/files\/hawk-performance-er-1-motorsports-brake-pads-front-hb550d-634-755.webp?v=1716869528"},{"product_id":"hawk-performance-er-1-motorsports-brake-pads-front-hb667d-622","title":"HAWK Performance ER-1 Motorsports Brake Pads Front - HB667D.622","description":"\u003cp\u003eER-1 has been developed by Hawk Performance for the endurance racing market with a simple goal; offer a higher coefficient of friction than competing endurance pads while maintaining matched or improved lifespan. Years of testing across America’s most prestigious races has resulted in a well-rounded compound that offers ideal modulation and pedal communication, with ground breaking friction stability across a thermal range as high as 1,600°F. This consistency of performance, hour after hour, makes it ideal for not only endurance racing, but HPDE, track days, time trials and even sprint racing.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSuperior Pad \u0026amp; Rotor wear\u003c\/li\u003e\n\u003cli\u003eConsistent medium-to-high friction\u003c\/li\u003e\n\u003cli\u003eSpecific emphasis on modulation, release and pedal communication\u003c\/li\u003e\n\u003cli\u003eIdeal for light-to-medium weight vehicles in HPDE, Track Day events, Time Trials, or Endurance Racing\u003c\/li\u003e\n\u003cli\u003eHigher coefficient of friction than competing endurance pads, wtih matched or improved lifespan\u003c\/li\u003e\n\u003cli\u003eAll Hawk Performance compounds are not compatible with carbon ceramic rotors. Hawk pads are designed to work with Iron\/Metal rotors\u003c\/li\u003e\n\u003cli\u003eMedium to High torque\u003c\/li\u003e\n\u003cli\u003e400-1600 F operating temperatures\u003c\/li\u003e\n\u003cli\u003e700-1100 F optimal temperatures\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eImage is for illustative purposes, actual product may differ.\u003c\/p\u003e\n\u003ch3\u003eLimited Lifetime Warranty\u003c\/h3\u003e\n\u003cp\u003eCarlisle Brake \u0026amp; Friction (CBF) warrants Hawk Performance branded products to be free of defects from workmanship and materials. This warranty does not apply to normal wear or damage caused by negligence, lack of maintenance, accident, abnormal operations, or improper installation or service. CBF does not make any other warranty claims, either expressed or implied, including the implied warranties of merchantability or fitness for a particular purpose. In no event will CBF\/Hawk Performance be liable for incidental or consequential damages of any kind, whether such damages are claimed on account of breach of warranty, breach of contract, negligence, or strict product liability. This includes without limitation, damage to property, or other economic losses that may be incurred. Any, and all, warranty claims must be processed through CBF. All valid warranty claims will be replaced and\/or reimbursed with Hawk Performance branded products of equal or greater value.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e* Disclaimer to Limited Life-Time Warranty: Motorsports brake pads and rotors are developed for high performance events. Racing is a dangerous sport. Hawk Performance racing brake pads and rotors are sold without warranty expressed or implied. No warranty or representation is made as to this products ability to protect the user from injury or death. The user assumes that risk.\u003c\/strong\u003e\u003c\/p\u003e","brand":"HAWK Performance","offers":[{"title":"Default Title","offer_id":47790918041896,"sku":"HWK-HB667D.622","price":429.76,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/5767\/7352\/files\/hawk-performance-er-1-motorsports-brake-pads-front-hb667d-622-801.webp?v=1716869790"},{"product_id":"hawk-performance-hp-plus-road-and-track-brake-pads-front-hb550n-634","title":"HAWK Performance HP Plus Road and Track Brake Pads Front - HB550N.634","description":"\u003cdiv\u003e\n\u003cp\u003eThe Hawk Performance HP Plus brake pad compound is ideal for Autocross and Track Day drivers looking for a high performance race compound that can take the heat of the track and get you home safely without having to change the pads. HP Plus utilizes a unique Ferro-Carbon, High-Tech friction material that was developed and manufactured for sport driving in autocross, Solo II, and track day applications. The Ferro-Carbon formulation offers lower wear rates and higher torque values than other competitive materials.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cp\u003eHP Plus is popular with enthusiasts that are looking for excellent street performance or wanting take their car auto-crossing or to a track day and not have to worry about changing pads. The HP Plus will provide a very noticeable increase in brake torque and temperature range when compared to OEM pads. Usually recommended to beginners who have very little to no track experience and are looking for an upgrade over stock.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003eLow to Mid Temperature Range\u003c\/li\u003e\n\u003cli\u003eFade Resistant\u003c\/li\u003e\n\u003cli\u003eSmooth, Predictable Torque\u003c\/li\u003e\n\u003cli\u003eIdeal for Autocross\u003c\/li\u003e\n\u003cli\u003e100-800 Deg F Operating Temperature Range\u003c\/li\u003e\n\u003cli\u003e300-600 Deg F Optimal Temperature Range\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eImage is for illustative purposes, actual product may differ.\u003c\/p\u003e\n\u003ch3\u003eHawk Brake Pad Installation Procedure\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eInstall Brake pads properly. Be sure pads are securely positioned in the caliper.\u003c\/li\u003e\n\u003cli\u003eFlush system with fresh brake fluid.\u003c\/li\u003e\n\u003cli\u003eCheck all hydraulic parts for excess wear and tear.\u003c\/li\u003e\n\u003cli\u003eCheck disc for proper thickness, parallelism, and lateral run-out.\u003c\/li\u003e\n\u003cli\u003eCheck disc for scoring or grooves over .012\"\" depth. If either applies, resurfacing or replacement is required.\u003c\/li\u003e\n\u003cli\u003eIf disc does not need resurfacing then contamination from the previous brake pads must be removed. Sand discs with Garnet sandpaper using moderate pressure. Use soap and water to clean off disc surface after sanding and machining. Discs should be free and clear of oil, grease, and brake fluid\u003c\/li\u003e\n\u003cli\u003eInspect calipers for freedom of movement. Lubricate where necessary\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eHawk Brake Pad Bedding Procedure - Street Compounds\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMake 6-10 slow-downs from approximately 30-35 mph to 5 mph. applying moderate pressure. Do not come to a complete stop.\u003c\/li\u003e\n\u003cli\u003eMake an additional 2 to 3 harder stops from approximately 40-45 mph. to zero.\u003c\/li\u003e\n\u003cli\u003eDO NOT DRAG THE BRAKES! (after stopping - do not leave your foot on the brake pedal)\u003c\/li\u003e\n\u003cli\u003eAllow 15 minutes or more for the brake system to cool down.\u003c\/li\u003e\n\u003cli\u003eYour new Hawk pads are ready for use.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eLimited Lifetime Warranty\u003c\/h3\u003e\n\u003cp\u003eCarlisle Brake \u0026amp; Friction (CBF) warrants Hawk Performance branded products to be free of defects from workmanship and materials. This warranty does not apply to normal wear or damage caused by negligence, lack of maintenance, accident, abnormal operations, or improper installation or service. CBF does not make any other warranty claims, either expressed or implied, including the implied warranties of merchantability or fitness for a particular purpose. In no event will CBF\/Hawk Performance be liable for incidental or consequential damages of any kind, whether such damages are claimed on account of breach of warranty, breach of contract, negligence, or strict product liability. This includes without limitation, damage to property, or other economic losses that may be incurred. Any, and all, warranty claims must be processed through CBF. All valid warranty claims will be replaced and\/or reimbursed with Hawk Performance branded products of equal or greater value.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e* Disclaimer to Limited Life-Time Warranty: Motorsports brake pads and rotors are developed for high performance events. Racing is a dangerous sport. Hawk Performance racing brake pads and rotors are sold without warranty expressed or implied. No warranty or representation is made as to this products ability to protect the user from injury or death. The user assumes that risk.\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/div\u003e","brand":"HAWK Performance","offers":[{"title":"Default Title","offer_id":47790929019176,"sku":"HWK-HB550N.634","price":217.06,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/5767\/7352\/files\/hawk-performance-hp-plus-road-and-track-brake-pads-front-hb550n-634-451.webp?v=1716873742"},{"product_id":"hawk-performance-hp-plus-road-and-track-brake-pads-front-hb667n-622","title":"HAWK Performance HP Plus Road and Track Brake Pads Front - HB667N.622","description":"\u003cdiv\u003e\n\u003cp\u003eThe Hawk Performance HP Plus brake pad compound is ideal for Autocross and Track Day drivers looking for a high performance race compound that can take the heat of the track and get you home safely without having to change the pads. HP Plus utilizes a unique Ferro-Carbon, High-Tech friction material that was developed and manufactured for sport driving in autocross, Solo II, and track day applications. The Ferro-Carbon formulation offers lower wear rates and higher torque values than other competitive materials.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cp\u003eHP Plus is popular with enthusiasts that are looking for excellent street performance or wanting take their car auto-crossing or to a track day and not have to worry about changing pads. The HP Plus will provide a very noticeable increase in brake torque and temperature range when compared to OEM pads. Usually recommended to beginners who have very little to no track experience and are looking for an upgrade over stock.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003eLow to Mid Temperature Range\u003c\/li\u003e\n\u003cli\u003eFade Resistant\u003c\/li\u003e\n\u003cli\u003eSmooth, Predictable Torque\u003c\/li\u003e\n\u003cli\u003eIdeal for Autocross\u003c\/li\u003e\n\u003cli\u003e100-800 Deg F Operating Temperature Range\u003c\/li\u003e\n\u003cli\u003e300-600 Deg F Optimal Temperature Range\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eImage is for illustative purposes, actual product may differ.\u003c\/p\u003e\n\u003ch3\u003eHawk Brake Pad Installation Procedure\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eInstall Brake pads properly. Be sure pads are securely positioned in the caliper.\u003c\/li\u003e\n\u003cli\u003eFlush system with fresh brake fluid.\u003c\/li\u003e\n\u003cli\u003eCheck all hydraulic parts for excess wear and tear.\u003c\/li\u003e\n\u003cli\u003eCheck disc for proper thickness, parallelism, and lateral run-out.\u003c\/li\u003e\n\u003cli\u003eCheck disc for scoring or grooves over .012\"\" depth. If either applies, resurfacing or replacement is required.\u003c\/li\u003e\n\u003cli\u003eIf disc does not need resurfacing then contamination from the previous brake pads must be removed. Sand discs with Garnet sandpaper using moderate pressure. Use soap and water to clean off disc surface after sanding and machining. Discs should be free and clear of oil, grease, and brake fluid\u003c\/li\u003e\n\u003cli\u003eInspect calipers for freedom of movement. Lubricate where necessary\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eHawk Brake Pad Bedding Procedure - Street Compounds\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMake 6-10 slow-downs from approximately 30-35 mph to 5 mph. applying moderate pressure. Do not come to a complete stop.\u003c\/li\u003e\n\u003cli\u003eMake an additional 2 to 3 harder stops from approximately 40-45 mph. to zero.\u003c\/li\u003e\n\u003cli\u003eDO NOT DRAG THE BRAKES! (after stopping - do not leave your foot on the brake pedal)\u003c\/li\u003e\n\u003cli\u003eAllow 15 minutes or more for the brake system to cool down.\u003c\/li\u003e\n\u003cli\u003eYour new Hawk pads are ready for use.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eLimited Lifetime Warranty\u003c\/h3\u003e\n\u003cp\u003eCarlisle Brake \u0026amp; Friction (CBF) warrants Hawk Performance branded products to be free of defects from workmanship and materials. This warranty does not apply to normal wear or damage caused by negligence, lack of maintenance, accident, abnormal operations, or improper installation or service. CBF does not make any other warranty claims, either expressed or implied, including the implied warranties of merchantability or fitness for a particular purpose. In no event will CBF\/Hawk Performance be liable for incidental or consequential damages of any kind, whether such damages are claimed on account of breach of warranty, breach of contract, negligence, or strict product liability. This includes without limitation, damage to property, or other economic losses that may be incurred. Any, and all, warranty claims must be processed through CBF. All valid warranty claims will be replaced and\/or reimbursed with Hawk Performance branded products of equal or greater value.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e* Disclaimer to Limited Life-Time Warranty: Motorsports brake pads and rotors are developed for high performance events. Racing is a dangerous sport. Hawk Performance racing brake pads and rotors are sold without warranty expressed or implied. No warranty or representation is made as to this products ability to protect the user from injury or death. The user assumes that risk.\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/div\u003e","brand":"HAWK Performance","offers":[{"title":"Default Title","offer_id":47790931509544,"sku":"HWK-HB667N.622","price":281.14,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/5767\/7352\/files\/hawk-performance-hp-plus-road-and-track-brake-pads-front-hb667n-622-777.webp?v=1716874288"},{"product_id":"hawk-performance-hp-plus-road-and-track-brake-pads-rear-hb290n-583","title":"HAWK Performance HP Plus Road and Track Brake Pads Rear - HB290N.583","description":"\u003cdiv\u003e\n\u003cp\u003eThe Hawk Performance HP Plus brake pad compound is ideal for Autocross and Track Day drivers looking for a high performance race compound that can take the heat of the track and get you home safely without having to change the pads. HP Plus utilizes a unique Ferro-Carbon, High-Tech friction material that was developed and manufactured for sport driving in autocross, Solo II, and track day applications. The Ferro-Carbon formulation offers lower wear rates and higher torque values than other competitive materials.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cp\u003eHP Plus is popular with enthusiasts that are looking for excellent street performance or wanting take their car auto-crossing or to a track day and not have to worry about changing pads. The HP Plus will provide a very noticeable increase in brake torque and temperature range when compared to OEM pads. Usually recommended to beginners who have very little to no track experience and are looking for an upgrade over stock.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003eLow to Mid Temperature Range\u003c\/li\u003e\n\u003cli\u003eFade Resistant\u003c\/li\u003e\n\u003cli\u003eSmooth, Predictable Torque\u003c\/li\u003e\n\u003cli\u003eIdeal for Autocross\u003c\/li\u003e\n\u003cli\u003e100-800 Deg F Operating Temperature Range\u003c\/li\u003e\n\u003cli\u003e300-600 Deg F Optimal Temperature Range\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eImage is for illustative purposes, actual product may differ.\u003c\/p\u003e\n\u003ch3\u003eHawk Brake Pad Installation Procedure\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eInstall Brake pads properly. Be sure pads are securely positioned in the caliper.\u003c\/li\u003e\n\u003cli\u003eFlush system with fresh brake fluid.\u003c\/li\u003e\n\u003cli\u003eCheck all hydraulic parts for excess wear and tear.\u003c\/li\u003e\n\u003cli\u003eCheck disc for proper thickness, parallelism, and lateral run-out.\u003c\/li\u003e\n\u003cli\u003eCheck disc for scoring or grooves over .012\"\" depth. If either applies, resurfacing or replacement is required.\u003c\/li\u003e\n\u003cli\u003eIf disc does not need resurfacing then contamination from the previous brake pads must be removed. Sand discs with Garnet sandpaper using moderate pressure. Use soap and water to clean off disc surface after sanding and machining. Discs should be free and clear of oil, grease, and brake fluid\u003c\/li\u003e\n\u003cli\u003eInspect calipers for freedom of movement. Lubricate where necessary\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eHawk Brake Pad Bedding Procedure - Street Compounds\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMake 6-10 slow-downs from approximately 30-35 mph to 5 mph. applying moderate pressure. Do not come to a complete stop.\u003c\/li\u003e\n\u003cli\u003eMake an additional 2 to 3 harder stops from approximately 40-45 mph. to zero.\u003c\/li\u003e\n\u003cli\u003eDO NOT DRAG THE BRAKES! (after stopping - do not leave your foot on the brake pedal)\u003c\/li\u003e\n\u003cli\u003eAllow 15 minutes or more for the brake system to cool down.\u003c\/li\u003e\n\u003cli\u003eYour new Hawk pads are ready for use.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eLimited Lifetime Warranty\u003c\/h3\u003e\n\u003cp\u003eCarlisle Brake \u0026amp; Friction (CBF) warrants Hawk Performance branded products to be free of defects from workmanship and materials. This warranty does not apply to normal wear or damage caused by negligence, lack of maintenance, accident, abnormal operations, or improper installation or service. CBF does not make any other warranty claims, either expressed or implied, including the implied warranties of merchantability or fitness for a particular purpose. In no event will CBF\/Hawk Performance be liable for incidental or consequential damages of any kind, whether such damages are claimed on account of breach of warranty, breach of contract, negligence, or strict product liability. This includes without limitation, damage to property, or other economic losses that may be incurred. Any, and all, warranty claims must be processed through CBF. All valid warranty claims will be replaced and\/or reimbursed with Hawk Performance branded products of equal or greater value.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e* Disclaimer to Limited Life-Time Warranty: Motorsports brake pads and rotors are developed for high performance events. Racing is a dangerous sport. Hawk Performance racing brake pads and rotors are sold without warranty expressed or implied. No warranty or representation is made as to this products ability to protect the user from injury or death. The user assumes that risk.\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/div\u003e","brand":"HAWK Performance","offers":[{"title":"Default Title","offer_id":47790938652968,"sku":"HWK-HB290N.583","price":217.92,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/5767\/7352\/files\/hawk-performance-hp-plus-road-and-track-brake-pads-rear-hb290n-583-926.webp?v=1716875993"},{"product_id":"hawk-performance-hps-5-0-high-performance-street-brake-pads-front-hb483b-635","title":"HAWK Performance HPS 5.0 High Performance Street Brake Pads Front - HB483B.635","description":"\u003cp\u003eFor years, engine builders have been pushing motors to the limits of their ability, and at Hawk Performance, we're closer than ever to pushing the ABS Rev Limiter to its limits. The Hawk HPS 5.0 (High Performance Street 5.0) brake pad compound gives your vehicle the greatest possible stopping power and pedal feel without compromising ABS. HPS 5.0 is a Ferro-Carbon compound that provides advanced braking characteristics to enhance the driving experience. This compound combines the safety and quality of aerospace design with the braking technology of motorsports. The results are shorter stopping distances, improved performance under heavy braking conditions, and street car friendly characteristics.\u003c\/p\u003e\n\u003cp\u003eThe Hawk HPS 5.0 is a good choice if you are looking to increase your street performance to the maximum level possible without suffering the adverse side effects of noise and large amounts of brake dust commonly associated with higher performance pads. The HPS 5.0 will provide increased brake torque and operating temperature when compared to the Hawk HPS compound. The HPS 5.0 compound can withstand light track use as long as you are aware of the signs of over-heating and allow proper cool off time when the pads approach their upper temperature. The Hawk HPS 5.0 compound is not a race compound and it can not withstand prolonged race sessions at high temperatures. The HPS 5.0 Compound will be cleaner than most OEM Pads, but produce more brake dust than the Hawk Ceramic and Hawk HPS.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAggressive Torque\u003c\/li\u003e\n\u003cli\u003eGreat Rotor and Pad Wear\u003c\/li\u003e\n\u003cli\u003eSmooth, Predictable Control\u003c\/li\u003e\n\u003cli\u003eHigh Rates of Deceleration\u003c\/li\u003e\n\u003cli\u003eConsistent Release Characteristics\u003c\/li\u003e\n\u003cli\u003e100-750 Deg F Operating Temperature Range\u003c\/li\u003e\n\u003cli\u003e100-550 Deg F Optimal Temperature Range\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv\u003e\n\u003cp\u003eImage is for illustative purposes, actual product may differ.\u003c\/p\u003e\n\u003ch3\u003eHawk Brake Pad Installation Procedure\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eInstall Brake pads properly. Be sure pads are securely positioned in the caliper.\u003c\/li\u003e\n\u003cli\u003eFlush system with fresh brake fluid.\u003c\/li\u003e\n\u003cli\u003eCheck all hydraulic parts for excess wear and tear.\u003c\/li\u003e\n\u003cli\u003eCheck disc for proper thickness, parallelism, and lateral run-out.\u003c\/li\u003e\n\u003cli\u003eCheck disc for scoring or grooves over .012\"\" depth. If either applies, resurfacing or replacement is required.\u003c\/li\u003e\n\u003cli\u003eIf disc does not need resurfacing then contamination from the previous brake pads must be removed. Sand discs with Garnet sandpaper using moderate pressure. Use soap and water to clean off disc surface after sanding and machining. Discs should be free and clear of oil, grease, and brake fluid\u003c\/li\u003e\n\u003cli\u003eInspect calipers for freedom of movement. Lubricate where necessary\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eHawk Brake Pad Bedding Procedure - Street Compounds\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMake 6-10 slow-downs from approximately 30-35 mph to 5 mph. applying moderate pressure. Do not come to a complete stop.\u003c\/li\u003e\n\u003cli\u003eMake an additional 2 to 3 harder stops from approximately 40-45 mph. to zero.\u003c\/li\u003e\n\u003cli\u003eDO NOT DRAG THE BRAKES! (after stopping - do not leave your foot on the brake pedal)\u003c\/li\u003e\n\u003cli\u003eAllow 15 minutes or more for the brake system to cool down.\u003c\/li\u003e\n\u003cli\u003eYour new Hawk pads are ready for use.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eLimited Lifetime Warranty\u003c\/h3\u003e\n\u003cp\u003eCarlisle Brake \u0026amp; Friction (CBF) warrants Hawk Performance branded products to be free of defects from workmanship and materials. This warranty does not apply to normal wear or damage caused by negligence, lack of maintenance, accident, abnormal operations, or improper installation or service. CBF does not make any other warranty claims, either expressed or implied, including the implied warranties of merchantability or fitness for a particular purpose. In no event will CBF\/Hawk Performance be liable for incidental or consequential damages of any kind, whether such damages are claimed on account of breach of warranty, breach of contract, negligence, or strict product liability. This includes without limitation, damage to property, or other economic losses that may be incurred. Any, and all, warranty claims must be processed through CBF. All valid warranty claims will be replaced and\/or reimbursed with Hawk Performance branded products of equal or greater value.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e* Disclaimer to Limited Life-Time Warranty: Motorsports brake pads and rotors are developed for high performance events. Racing is a dangerous sport. Hawk Performance racing brake pads and rotors are sold without warranty expressed or implied. No warranty or representation is made as to this products ability to protect the user from injury or death. The user assumes that risk.\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/div\u003e","brand":"HAWK Performance","offers":[{"title":"Default Title","offer_id":47790951924008,"sku":"HWK-HB483B.635","price":213.64,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/5767\/7352\/files\/hawk-performance-hps-5-0-high-street-brake-pads-front-hb483b-635-275.webp?v=1716879845"},{"product_id":"hawk-performance-hps-5-0-high-performance-street-brake-pads-front-hb550b-634","title":"HAWK Performance HPS 5.0 High Performance Street Brake Pads Front - HB550B.634","description":"\u003cp\u003eFor years, engine builders have been pushing motors to the limits of their ability, and at Hawk Performance, we're closer than ever to pushing the ABS Rev Limiter to its limits. The Hawk HPS 5.0 (High Performance Street 5.0) brake pad compound gives your vehicle the greatest possible stopping power and pedal feel without compromising ABS. HPS 5.0 is a Ferro-Carbon compound that provides advanced braking characteristics to enhance the driving experience. This compound combines the safety and quality of aerospace design with the braking technology of motorsports. The results are shorter stopping distances, improved performance under heavy braking conditions, and street car friendly characteristics.\u003c\/p\u003e\n\u003cp\u003eThe Hawk HPS 5.0 is a good choice if you are looking to increase your street performance to the maximum level possible without suffering the adverse side effects of noise and large amounts of brake dust commonly associated with higher performance pads. The HPS 5.0 will provide increased brake torque and operating temperature when compared to the Hawk HPS compound. The HPS 5.0 compound can withstand light track use as long as you are aware of the signs of over-heating and allow proper cool off time when the pads approach their upper temperature. The Hawk HPS 5.0 compound is not a race compound and it can not withstand prolonged race sessions at high temperatures. The HPS 5.0 Compound will be cleaner than most OEM Pads, but produce more brake dust than the Hawk Ceramic and Hawk HPS.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAggressive Torque\u003c\/li\u003e\n\u003cli\u003eGreat Rotor and Pad Wear\u003c\/li\u003e\n\u003cli\u003eSmooth, Predictable Control\u003c\/li\u003e\n\u003cli\u003eHigh Rates of Deceleration\u003c\/li\u003e\n\u003cli\u003eConsistent Release Characteristics\u003c\/li\u003e\n\u003cli\u003e100-750 Deg F Operating Temperature Range\u003c\/li\u003e\n\u003cli\u003e100-550 Deg F Optimal Temperature Range\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv\u003e\n\u003cp\u003eImage is for illustative purposes, actual product may differ.\u003c\/p\u003e\n\u003ch3\u003eHawk Brake Pad Installation Procedure\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eInstall Brake pads properly. Be sure pads are securely positioned in the caliper.\u003c\/li\u003e\n\u003cli\u003eFlush system with fresh brake fluid.\u003c\/li\u003e\n\u003cli\u003eCheck all hydraulic parts for excess wear and tear.\u003c\/li\u003e\n\u003cli\u003eCheck disc for proper thickness, parallelism, and lateral run-out.\u003c\/li\u003e\n\u003cli\u003eCheck disc for scoring or grooves over .012\"\" depth. If either applies, resurfacing or replacement is required.\u003c\/li\u003e\n\u003cli\u003eIf disc does not need resurfacing then contamination from the previous brake pads must be removed. Sand discs with Garnet sandpaper using moderate pressure. Use soap and water to clean off disc surface after sanding and machining. Discs should be free and clear of oil, grease, and brake fluid\u003c\/li\u003e\n\u003cli\u003eInspect calipers for freedom of movement. Lubricate where necessary\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eHawk Brake Pad Bedding Procedure - Street Compounds\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMake 6-10 slow-downs from approximately 30-35 mph to 5 mph. applying moderate pressure. Do not come to a complete stop.\u003c\/li\u003e\n\u003cli\u003eMake an additional 2 to 3 harder stops from approximately 40-45 mph. to zero.\u003c\/li\u003e\n\u003cli\u003eDO NOT DRAG THE BRAKES! (after stopping - do not leave your foot on the brake pedal)\u003c\/li\u003e\n\u003cli\u003eAllow 15 minutes or more for the brake system to cool down.\u003c\/li\u003e\n\u003cli\u003eYour new Hawk pads are ready for use.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eLimited Lifetime Warranty\u003c\/h3\u003e\n\u003cp\u003eCarlisle Brake \u0026amp; Friction (CBF) warrants Hawk Performance branded products to be free of defects from workmanship and materials. This warranty does not apply to normal wear or damage caused by negligence, lack of maintenance, accident, abnormal operations, or improper installation or service. CBF does not make any other warranty claims, either expressed or implied, including the implied warranties of merchantability or fitness for a particular purpose. In no event will CBF\/Hawk Performance be liable for incidental or consequential damages of any kind, whether such damages are claimed on account of breach of warranty, breach of contract, negligence, or strict product liability. This includes without limitation, damage to property, or other economic losses that may be incurred. Any, and all, warranty claims must be processed through CBF. All valid warranty claims will be replaced and\/or reimbursed with Hawk Performance branded products of equal or greater value.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e* Disclaimer to Limited Life-Time Warranty: Motorsports brake pads and rotors are developed for high performance events. Racing is a dangerous sport. Hawk Performance racing brake pads and rotors are sold without warranty expressed or implied. No warranty or representation is made as to this products ability to protect the user from injury or death. The user assumes that risk.\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/div\u003e","brand":"HAWK Performance","offers":[{"title":"Default Title","offer_id":47790955659560,"sku":"HWK-HB550B.634","price":193.12,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/5767\/7352\/files\/hawk-performance-hps-5-0-high-street-brake-pads-front-hb550b-634-100.webp?v=1716880462"},{"product_id":"hawk-performance-hps-5-0-high-performance-street-brake-pads-front-hb667b-622","title":"HAWK Performance HPS 5.0 High Performance Street Brake Pads Front - HB667B.622","description":"\u003cp\u003eFor years, engine builders have been pushing motors to the limits of their ability, and at Hawk Performance, we're closer than ever to pushing the ABS Rev Limiter to its limits. The Hawk HPS 5.0 (High Performance Street 5.0) brake pad compound gives your vehicle the greatest possible stopping power and pedal feel without compromising ABS. HPS 5.0 is a Ferro-Carbon compound that provides advanced braking characteristics to enhance the driving experience. This compound combines the safety and quality of aerospace design with the braking technology of motorsports. The results are shorter stopping distances, improved performance under heavy braking conditions, and street car friendly characteristics.\u003c\/p\u003e\n\u003cp\u003eThe Hawk HPS 5.0 is a good choice if you are looking to increase your street performance to the maximum level possible without suffering the adverse side effects of noise and large amounts of brake dust commonly associated with higher performance pads. The HPS 5.0 will provide increased brake torque and operating temperature when compared to the Hawk HPS compound. The HPS 5.0 compound can withstand light track use as long as you are aware of the signs of over-heating and allow proper cool off time when the pads approach their upper temperature. The Hawk HPS 5.0 compound is not a race compound and it can not withstand prolonged race sessions at high temperatures. The HPS 5.0 Compound will be cleaner than most OEM Pads, but produce more brake dust than the Hawk Ceramic and Hawk HPS.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAggressive Torque\u003c\/li\u003e\n\u003cli\u003eGreat Rotor and Pad Wear\u003c\/li\u003e\n\u003cli\u003eSmooth, Predictable Control\u003c\/li\u003e\n\u003cli\u003eHigh Rates of Deceleration\u003c\/li\u003e\n\u003cli\u003eConsistent Release Characteristics\u003c\/li\u003e\n\u003cli\u003e100-750 Deg F Operating Temperature Range\u003c\/li\u003e\n\u003cli\u003e100-550 Deg F Optimal Temperature Range\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv\u003e\n\u003cp\u003eImage is for illustative purposes, actual product may differ.\u003c\/p\u003e\n\u003ch3\u003eHawk Brake Pad Installation Procedure\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eInstall Brake pads properly. Be sure pads are securely positioned in the caliper.\u003c\/li\u003e\n\u003cli\u003eFlush system with fresh brake fluid.\u003c\/li\u003e\n\u003cli\u003eCheck all hydraulic parts for excess wear and tear.\u003c\/li\u003e\n\u003cli\u003eCheck disc for proper thickness, parallelism, and lateral run-out.\u003c\/li\u003e\n\u003cli\u003eCheck disc for scoring or grooves over .012\"\" depth. If either applies, resurfacing or replacement is required.\u003c\/li\u003e\n\u003cli\u003eIf disc does not need resurfacing then contamination from the previous brake pads must be removed. Sand discs with Garnet sandpaper using moderate pressure. Use soap and water to clean off disc surface after sanding and machining. Discs should be free and clear of oil, grease, and brake fluid\u003c\/li\u003e\n\u003cli\u003eInspect calipers for freedom of movement. Lubricate where necessary\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eHawk Brake Pad Bedding Procedure - Street Compounds\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMake 6-10 slow-downs from approximately 30-35 mph to 5 mph. applying moderate pressure. Do not come to a complete stop.\u003c\/li\u003e\n\u003cli\u003eMake an additional 2 to 3 harder stops from approximately 40-45 mph. to zero.\u003c\/li\u003e\n\u003cli\u003eDO NOT DRAG THE BRAKES! (after stopping - do not leave your foot on the brake pedal)\u003c\/li\u003e\n\u003cli\u003eAllow 15 minutes or more for the brake system to cool down.\u003c\/li\u003e\n\u003cli\u003eYour new Hawk pads are ready for use.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eLimited Lifetime Warranty\u003c\/h3\u003e\n\u003cp\u003eCarlisle Brake \u0026amp; Friction (CBF) warrants Hawk Performance branded products to be free of defects from workmanship and materials. This warranty does not apply to normal wear or damage caused by negligence, lack of maintenance, accident, abnormal operations, or improper installation or service. CBF does not make any other warranty claims, either expressed or implied, including the implied warranties of merchantability or fitness for a particular purpose. In no event will CBF\/Hawk Performance be liable for incidental or consequential damages of any kind, whether such damages are claimed on account of breach of warranty, breach of contract, negligence, or strict product liability. This includes without limitation, damage to property, or other economic losses that may be incurred. Any, and all, warranty claims must be processed through CBF. All valid warranty claims will be replaced and\/or reimbursed with Hawk Performance branded products of equal or greater value.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e* Disclaimer to Limited Life-Time Warranty: Motorsports brake pads and rotors are developed for high performance events. Racing is a dangerous sport. Hawk Performance racing brake pads and rotors are sold without warranty expressed or implied. No warranty or representation is made as to this products ability to protect the user from injury or death. The user assumes that risk.\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/div\u003e","brand":"HAWK Performance","offers":[{"title":"Default Title","offer_id":47790958706984,"sku":"HWK-HB667B.622","price":231.58,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/5767\/7352\/files\/hawk-performance-hps-5-0-high-street-brake-pads-front-hb667b-622-279.webp?v=1716881153"}],"url":"https:\/\/www.tegiwa.com\/collections\/porsche-911-996-gearbox-differential-clutch-flywheel-drivetrain-upgrades.oembed","provider":"Tegiwa","version":"1.0","type":"link"}