{"title":"Nitron R3 Coilovers – 3 Way Independently Adjustable Race Suspension","description":"\u003cp\u003eThe Nitron R3 sets the standard for ultimate damping control. With 3-way independent adjustment of rebound plus high- and low-speed compression via a piggyback or remote reservoir, the R3 gives experienced drivers and race engineers the tools to extract every last tenth from their car. A class-leading large-diameter piston and ultra-strong piston rod deliver outstanding damping precision and instant feedback, while titanium and hard-anodised components resist corrosion and cut weight. A proven race winner and lap record holder across international motorsport, every R3 kit is hand-built, custom-sprung and fully serviceable.\u003c\/p\u003e","products":[{"product_id":"nitron-elec-tron-r3-coilovers-audi-r8-42-06-15-with-standalone-fal","title":"Nitron elec-TRON R3 Coilovers Audi R8 42 06-15 With Standalone FAL","description":"\u003ch2\u003eNitron elec-TRON R3 Coilovers\u003c\/h2\u003e \u003cem\u003ePlease note: This kit uses the’s DNA electronic control system, so no additional products are required.\u003c\/em\u003e \u003cp\u003eThe elec-TRON R3 coilover kit combines the Nitron proportional solenoid valve with independent manual compression control. Designed for enthusiasts or professionals looking to further optimise their vehicle’s suspension performance for more extreme driving conditions and a higher level of performance. Piggyback or remotely mounted reservoirs allow quick and simple independent adjustment of high-speed and low-speed compression damping.\u003c\/p\u003e \u003cul\u003e \u003cli\u003e16 high-speed and 26 low-speed clicks, setting the baseline for the semi active system\u003c\/li\u003e \u003cli\u003eAdjustable top mounts and race springs\u003c\/li\u003e \u003cli\u003eRemote reservoirs for quick and simple compression adjustment\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e\u003cstrong\u003eTake the Next Step in Suspension Innovation\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eThe Nitron \u003cem\u003eelec-TRON\u003c\/em\u003e range is a fusion of world-renowned Nitron quality and attention to detail, combined with cutting-edge electronic valve technology. At the heart of the system is Nitron’s proportional solenoid valve, delivering unparalleled precision and control over the damping system. Each shock absorber in the \u003cem\u003eelec-TRON\u003c\/em\u003e system is equipped with an independent valve, allowing for individual damping control at each wheel. This is essential for optimising handling, stability and ride comfort.\u003c\/p\u003e \u003cp\u003eThe \u003cem\u003eelec-TRON\u003c\/em\u003e proportional valve operates within a range of 300-1800mA, providing a broad adjustment capability and a rapid response time of just 6 to 8 milliseconds from full hard to full soft. This system governs both compression and rebound damping. The valve is piston rod-mounted, fine-tuning the bleed characteristics of the shim stack, and is integrated with Nitron’s gas-pressurized mono-tube construction, ensuring maximum performance and reliability. This valve is compatible with both the R1 (electronic adjustment only) and the R3 (manual high and low-speed compression adjustment).\u003c\/p\u003e \u003cp\u003eIn the R3, the manual settings establish a baseline for the adjustments made by the main \u003cem\u003eelec-TRON\u003c\/em\u003e valve. The system can precisely adjust damping force based on a variety of factors such as g-load conditions, vehicle speed, road surface, and driver input. This results in highly accurate and responsive damping, significantly enhancing the overall performance of the vehicle.\u003c\/p\u003e \u003cp\u003eNote: Image used for illustration purposes only. Specific details, finishes and end fittings may differ from that shown.\u003cbr\u003e\u003c\/p\u003e \u003cp\u003eAll Nitron shocks are hand made to order to each individual customer's requirements. Lead times are normally 2 - 3 weeks, but at certain times may be slightly longer. If you would like a more accurate delivery time please contact us.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003ePlease note:\u003c\/strong\u003e this kit requires the Nitron Damper Control Unit (DCU) to operate.\u003c\/p\u003e\u003ch3\u003eFront Axle Lift (FAL)\u003c\/h3\u003e\u003cp\u003eThis kit is supplied with the Nitron standalone Front Axle Lift system, letting you raise the front axle to clear speed bumps, ramps and steep driveways without affecting damping performance.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKey features:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eKit contains all components – lift cylinders, hydraulic lines, pump, mounting bracket, wiring loom and controller\u003c\/li\u003e\n\u003cli\u003e250W pump, typical lift time under 3 seconds\u003c\/li\u003e\n\u003cli\u003eAudible in-cabin warning system and switch with built-in warning light\u003c\/li\u003e\n\u003cli\u003eAuto-off function\u003c\/li\u003e\n\u003cli\u003eLift height varies by application – see the specification table below\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Nitron","offers":[{"title":"Road","offer_id":58532170989949,"sku":"NTCAU010ER3FRS+FAL","price":9486.0,"currency_code":"GBP","in_stock":true},{"title":"Track","offer_id":58532171022717,"sku":"NTCAU010ER3TDS+FAL","price":9486.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/5767\/7352\/files\/NTCAU010ER3-FAL-01.jpg?v=1786634132"},{"product_id":"nitron-elec-tron-r3-coilovers-bmw-m4-competition-f82-14-20","title":"Nitron elec-TRON R3 Coilovers BMW M4 Competition F82 14-20","description":"\u003ch2\u003eNitron elec-TRON R3 Coilovers\u003c\/h2\u003e \u003cem\u003ePlease note: This kit uses the’s DNA electronic control system, so no additional products are required.\u003c\/em\u003e \u003cp\u003eThe elec-TRON R3 coilover kit combines the Nitron proportional solenoid valve with independent manual compression control. Designed for enthusiasts or professionals looking to further optimise their vehicle’s suspension performance for more extreme driving conditions and a higher level of performance. Piggyback or remotely mounted reservoirs allow quick and simple independent adjustment of high-speed and low-speed compression damping.\u003c\/p\u003e \u003cul\u003e \u003cli\u003e16 high-speed and 26 low-speed clicks, setting the baseline for the semi active system\u003c\/li\u003e \u003cli\u003eAdjustable top mounts and race springs\u003c\/li\u003e \u003cli\u003eRemote reservoirs for quick and simple compression adjustment\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e\u003cstrong\u003eTake the Next Step in Suspension Innovation\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eThe Nitron \u003cem\u003eelec-TRON\u003c\/em\u003e range is a fusion of world-renowned Nitron quality and attention to detail, combined with cutting-edge electronic valve technology. At the heart of the system is Nitron’s proportional solenoid valve, delivering unparalleled precision and control over the damping system. Each shock absorber in the \u003cem\u003eelec-TRON\u003c\/em\u003e system is equipped with an independent valve, allowing for individual damping control at each wheel. This is essential for optimising handling, stability and ride comfort.\u003c\/p\u003e \u003cp\u003eThe \u003cem\u003eelec-TRON\u003c\/em\u003e proportional valve operates within a range of 300-1800mA, providing a broad adjustment capability and a rapid response time of just 6 to 8 milliseconds from full hard to full soft. This system governs both compression and rebound damping. The valve is piston rod-mounted, fine-tuning the bleed characteristics of the shim stack, and is integrated with Nitron’s gas-pressurized mono-tube construction, ensuring maximum performance and reliability. This valve is compatible with both the R1 (electronic adjustment only) and the R3 (manual high and low-speed compression adjustment).\u003c\/p\u003e \u003cp\u003eIn the R3, the manual settings establish a baseline for the adjustments made by the main \u003cem\u003eelec-TRON\u003c\/em\u003e valve. The system can precisely adjust damping force based on a variety of factors such as g-load conditions, vehicle speed, road surface, and driver input. This results in highly accurate and responsive damping, significantly enhancing the overall performance of the vehicle.\u003c\/p\u003e \u003cp\u003eNote: Image used for illustration purposes only. Specific details, finishes and end fittings may differ from that shown.\u003cbr\u003e\u003c\/p\u003e \u003cp\u003eAll Nitron shocks are hand made to order to each individual customer's requirements. Lead times are normally 2 - 3 weeks, but at certain times may be slightly longer. If you would like a more accurate delivery time please contact us.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003ePlease note:\u003c\/strong\u003e this kit requires the Nitron Damper Control Unit (DCU) to operate.\u003c\/p\u003e","brand":"Nitron","offers":[{"title":"Road","offer_id":58532171088253,"sku":"NTCBM022ER3FRS","price":7668.0,"currency_code":"GBP","in_stock":true},{"title":"Track","offer_id":58532171121021,"sku":"NTCBM022ER3TDS","price":7668.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/5767\/7352\/files\/NTCBM022ER3-01.jpg?v=1786634131"},{"product_id":"nitron-elec-tron-r3-coilovers-bmw-m4-competition-f82-14-20-with-standalone-fal","title":"Nitron elec-TRON R3 Coilovers BMW M4 Competition F82 14-20 With Standalone FAL","description":"\u003ch2\u003eNitron elec-TRON R3 Coilovers\u003c\/h2\u003e \u003cem\u003ePlease note: This kit uses the’s DNA electronic control system, so no additional products are required.\u003c\/em\u003e \u003cp\u003eThe elec-TRON R3 coilover kit combines the Nitron proportional solenoid valve with independent manual compression control. Designed for enthusiasts or professionals looking to further optimise their vehicle’s suspension performance for more extreme driving conditions and a higher level of performance. Piggyback or remotely mounted reservoirs allow quick and simple independent adjustment of high-speed and low-speed compression damping.\u003c\/p\u003e \u003cul\u003e \u003cli\u003e16 high-speed and 26 low-speed clicks, setting the baseline for the semi active system\u003c\/li\u003e \u003cli\u003eAdjustable top mounts and race springs\u003c\/li\u003e \u003cli\u003eRemote reservoirs for quick and simple compression adjustment\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e\u003cstrong\u003eTake the Next Step in Suspension Innovation\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eThe Nitron \u003cem\u003eelec-TRON\u003c\/em\u003e range is a fusion of world-renowned Nitron quality and attention to detail, combined with cutting-edge electronic valve technology. At the heart of the system is Nitron’s proportional solenoid valve, delivering unparalleled precision and control over the damping system. Each shock absorber in the \u003cem\u003eelec-TRON\u003c\/em\u003e system is equipped with an independent valve, allowing for individual damping control at each wheel. This is essential for optimising handling, stability and ride comfort.\u003c\/p\u003e \u003cp\u003eThe \u003cem\u003eelec-TRON\u003c\/em\u003e proportional valve operates within a range of 300-1800mA, providing a broad adjustment capability and a rapid response time of just 6 to 8 milliseconds from full hard to full soft. This system governs both compression and rebound damping. The valve is piston rod-mounted, fine-tuning the bleed characteristics of the shim stack, and is integrated with Nitron’s gas-pressurized mono-tube construction, ensuring maximum performance and reliability. This valve is compatible with both the R1 (electronic adjustment only) and the R3 (manual high and low-speed compression adjustment).\u003c\/p\u003e \u003cp\u003eIn the R3, the manual settings establish a baseline for the adjustments made by the main \u003cem\u003eelec-TRON\u003c\/em\u003e valve. The system can precisely adjust damping force based on a variety of factors such as g-load conditions, vehicle speed, road surface, and driver input. This results in highly accurate and responsive damping, significantly enhancing the overall performance of the vehicle.\u003c\/p\u003e \u003cp\u003eNote: Image used for illustration purposes only. Specific details, finishes and end fittings may differ from that shown.\u003cbr\u003e\u003c\/p\u003e \u003cp\u003eAll Nitron shocks are hand made to order to each individual customer's requirements. Lead times are normally 2 - 3 weeks, but at certain times may be slightly longer. If you would like a more accurate delivery time please contact us.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003ePlease note:\u003c\/strong\u003e this kit requires the Nitron Damper Control Unit (DCU) to operate.\u003c\/p\u003e\u003ch3\u003eFront Axle Lift (FAL)\u003c\/h3\u003e\u003cp\u003eThis kit is supplied with the Nitron standalone Front Axle Lift system, letting you raise the front axle to clear speed bumps, ramps and steep driveways without affecting damping performance.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKey features:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eKit contains all components – lift cylinders, hydraulic lines, pump, mounting bracket, wiring loom and controller\u003c\/li\u003e\n\u003cli\u003e250W pump, typical lift time under 3 seconds\u003c\/li\u003e\n\u003cli\u003eAudible in-cabin warning system and switch with built-in warning light\u003c\/li\u003e\n\u003cli\u003eAuto-off function\u003c\/li\u003e\n\u003cli\u003eLift height varies by application – see the specification table below\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Nitron","offers":[{"title":"Road","offer_id":58532171219325,"sku":"NTCBM022ER3FRS+FAL","price":10848.0,"currency_code":"GBP","in_stock":true},{"title":"Track","offer_id":58532171252093,"sku":"NTCBM022ER3TDS+FAL","price":10848.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/5767\/7352\/files\/NTCBM022ER3-FAL-02.jpg?v=1786634131"},{"product_id":"nitron-elec-tron-r3-coilovers-audi-rs3-saloon-8v-quattro-13","title":"Nitron elec-TRON R3 Coilovers Audi RS3 Saloon 8V Quattro 13+","description":"\u003ch2\u003eNitron elec-TRON R3 Coilovers\u003c\/h2\u003e \u003cem\u003ePlease note: This kit uses the’s DNA electronic control system, so no additional products are required.\u003c\/em\u003e \u003cp\u003eThe elec-TRON R3 coilover kit combines the Nitron proportional solenoid valve with independent manual compression control. Designed for enthusiasts or professionals looking to further optimise their vehicle’s suspension performance for more extreme driving conditions and a higher level of performance. Piggyback or remotely mounted reservoirs allow quick and simple independent adjustment of high-speed and low-speed compression damping.\u003c\/p\u003e \u003cul\u003e \u003cli\u003e16 high-speed and 26 low-speed clicks, setting the baseline for the semi active system\u003c\/li\u003e \u003cli\u003eAdjustable top mounts and race springs\u003c\/li\u003e \u003cli\u003eRemote reservoirs for quick and simple compression adjustment\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e\u003cstrong\u003eTake the Next Step in Suspension Innovation\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eThe Nitron \u003cem\u003eelec-TRON\u003c\/em\u003e range is a fusion of world-renowned Nitron quality and attention to detail, combined with cutting-edge electronic valve technology. At the heart of the system is Nitron’s proportional solenoid valve, delivering unparalleled precision and control over the damping system. Each shock absorber in the \u003cem\u003eelec-TRON\u003c\/em\u003e system is equipped with an independent valve, allowing for individual damping control at each wheel. This is essential for optimising handling, stability and ride comfort.\u003c\/p\u003e \u003cp\u003eThe \u003cem\u003eelec-TRON\u003c\/em\u003e proportional valve operates within a range of 300-1800mA, providing a broad adjustment capability and a rapid response time of just 6 to 8 milliseconds from full hard to full soft. This system governs both compression and rebound damping. The valve is piston rod-mounted, fine-tuning the bleed characteristics of the shim stack, and is integrated with Nitron’s gas-pressurized mono-tube construction, ensuring maximum performance and reliability. This valve is compatible with both the R1 (electronic adjustment only) and the R3 (manual high and low-speed compression adjustment).\u003c\/p\u003e \u003cp\u003eIn the R3, the manual settings establish a baseline for the adjustments made by the main \u003cem\u003eelec-TRON\u003c\/em\u003e valve. The system can precisely adjust damping force based on a variety of factors such as g-load conditions, vehicle speed, road surface, and driver input. This results in highly accurate and responsive damping, significantly enhancing the overall performance of the vehicle.\u003c\/p\u003e \u003cp\u003eNote: Image used for illustration purposes only. Specific details, finishes and end fittings may differ from that shown.\u003cbr\u003e\u003c\/p\u003e \u003cp\u003eAll Nitron shocks are hand made to order to each individual customer's requirements. Lead times are normally 2 - 3 weeks, but at certain times may be slightly longer. If you would like a more accurate delivery time please contact us.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003ePlease note:\u003c\/strong\u003e this kit requires the Nitron Damper Control Unit (DCU) to operate.\u003c\/p\u003e","brand":"Nitron","offers":[{"title":"Road","offer_id":58532171284861,"sku":"NTCAU014ER3FRS-SALOON","price":7194.0,"currency_code":"GBP","in_stock":true},{"title":"Track","offer_id":58532171317629,"sku":"NTCAU014ER3TDS-SALOON","price":7194.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/5767\/7352\/files\/NitronR3-1_dc449297-79b0-4c75-a784-db2c9ce3e0dc.jpg?v=1786634134"},{"product_id":"nitron-elec-tron-r3-coilovers-alfa-romeo-giulia-2-9-quadrifoglio-15","title":"Nitron elec-TRON R3 Coilovers Alfa Romeo Giulia 2.9 Quadrifoglio 15+","description":"\u003ch2\u003eNitron elec-TRON R3 Coilovers\u003c\/h2\u003e \u003cem\u003ePlease note: This kit uses the’s DNA electronic control system, so no additional products are required.\u003c\/em\u003e \u003cp\u003eThe elec-TRON R3 coilover kit combines the Nitron proportional solenoid valve with independent manual compression control. Designed for enthusiasts or professionals looking to further optimise their vehicle’s suspension performance for more extreme driving conditions and a higher level of performance. Piggyback or remotely mounted reservoirs allow quick and simple independent adjustment of high-speed and low-speed compression damping.\u003c\/p\u003e \u003cul\u003e \u003cli\u003e16 high-speed and 26 low-speed clicks, setting the baseline for the semi active system\u003c\/li\u003e \u003cli\u003eAdjustable top mounts and race springs\u003c\/li\u003e \u003cli\u003eRemote reservoirs for quick and simple compression adjustment\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e\u003cstrong\u003eTake the Next Step in Suspension Innovation\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eThe Nitron \u003cem\u003eelec-TRON\u003c\/em\u003e range is a fusion of world-renowned Nitron quality and attention to detail, combined with cutting-edge electronic valve technology. At the heart of the system is Nitron’s proportional solenoid valve, delivering unparalleled precision and control over the damping system. Each shock absorber in the \u003cem\u003eelec-TRON\u003c\/em\u003e system is equipped with an independent valve, allowing for individual damping control at each wheel. This is essential for optimising handling, stability and ride comfort.\u003c\/p\u003e \u003cp\u003eThe \u003cem\u003eelec-TRON\u003c\/em\u003e proportional valve operates within a range of 300-1800mA, providing a broad adjustment capability and a rapid response time of just 6 to 8 milliseconds from full hard to full soft. This system governs both compression and rebound damping. The valve is piston rod-mounted, fine-tuning the bleed characteristics of the shim stack, and is integrated with Nitron’s gas-pressurized mono-tube construction, ensuring maximum performance and reliability. This valve is compatible with both the R1 (electronic adjustment only) and the R3 (manual high and low-speed compression adjustment).\u003c\/p\u003e \u003cp\u003eIn the R3, the manual settings establish a baseline for the adjustments made by the main \u003cem\u003eelec-TRON\u003c\/em\u003e valve. The system can precisely adjust damping force based on a variety of factors such as g-load conditions, vehicle speed, road surface, and driver input. This results in highly accurate and responsive damping, significantly enhancing the overall performance of the vehicle.\u003c\/p\u003e \u003cp\u003eNote: Image used for illustration purposes only. Specific details, finishes and end fittings may differ from that shown.\u003cbr\u003e\u003c\/p\u003e \u003cp\u003eAll Nitron shocks are hand made to order to each individual customer's requirements. Lead times are normally 2 - 3 weeks, but at certain times may be slightly longer. If you would like a more accurate delivery time please contact us.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003ePlease note:\u003c\/strong\u003e this kit requires the Nitron Damper Control Unit (DCU) to operate.\u003c\/p\u003e","brand":"Nitron","offers":[{"title":"Default Title","offer_id":58532171383165,"sku":"NTCAL011ER3","price":7518.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/5767\/7352\/files\/NTCAL011ER3-01.jpg?v=1786634128"},{"product_id":"nitron-elec-tron-r3-coilovers-audi-r8-4s-15","title":"Nitron elec-TRON R3 Coilovers Audi R8 4S 15+","description":"\u003ch2\u003eNitron elec-TRON R3 Coilovers\u003c\/h2\u003e \u003cem\u003ePlease note: This kit uses the’s DNA electronic control system, so no additional products are required.\u003c\/em\u003e \u003cp\u003eThe elec-TRON R3 coilover kit combines the Nitron proportional solenoid valve with independent manual compression control. Designed for enthusiasts or professionals looking to further optimise their vehicle’s suspension performance for more extreme driving conditions and a higher level of performance. Piggyback or remotely mounted reservoirs allow quick and simple independent adjustment of high-speed and low-speed compression damping.\u003c\/p\u003e \u003cul\u003e \u003cli\u003e16 high-speed and 26 low-speed clicks, setting the baseline for the semi active system\u003c\/li\u003e \u003cli\u003eAdjustable top mounts and race springs\u003c\/li\u003e \u003cli\u003eRemote reservoirs for quick and simple compression adjustment\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e\u003cstrong\u003eTake the Next Step in Suspension Innovation\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eThe Nitron \u003cem\u003eelec-TRON\u003c\/em\u003e range is a fusion of world-renowned Nitron quality and attention to detail, combined with cutting-edge electronic valve technology. At the heart of the system is Nitron’s proportional solenoid valve, delivering unparalleled precision and control over the damping system. Each shock absorber in the \u003cem\u003eelec-TRON\u003c\/em\u003e system is equipped with an independent valve, allowing for individual damping control at each wheel. This is essential for optimising handling, stability and ride comfort.\u003c\/p\u003e \u003cp\u003eThe \u003cem\u003eelec-TRON\u003c\/em\u003e proportional valve operates within a range of 300-1800mA, providing a broad adjustment capability and a rapid response time of just 6 to 8 milliseconds from full hard to full soft. This system governs both compression and rebound damping. The valve is piston rod-mounted, fine-tuning the bleed characteristics of the shim stack, and is integrated with Nitron’s gas-pressurized mono-tube construction, ensuring maximum performance and reliability. This valve is compatible with both the R1 (electronic adjustment only) and the R3 (manual high and low-speed compression adjustment).\u003c\/p\u003e \u003cp\u003eIn the R3, the manual settings establish a baseline for the adjustments made by the main \u003cem\u003eelec-TRON\u003c\/em\u003e valve. The system can precisely adjust damping force based on a variety of factors such as g-load conditions, vehicle speed, road surface, and driver input. This results in highly accurate and responsive damping, significantly enhancing the overall performance of the vehicle.\u003c\/p\u003e \u003cp\u003eNote: Image used for illustration purposes only. Specific details, finishes and end fittings may differ from that shown.\u003cbr\u003e\u003c\/p\u003e \u003cp\u003eAll Nitron shocks are hand made to order to each individual customer's requirements. Lead times are normally 2 - 3 weeks, but at certain times may be slightly longer. If you would like a more accurate delivery time please contact us.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003ePlease note:\u003c\/strong\u003e this kit requires the Nitron Damper Control Unit (DCU) to operate.\u003c\/p\u003e","brand":"Nitron","offers":[{"title":"Road","offer_id":58532171415933,"sku":"NTCAU012ER3FRS","price":7812.0,"currency_code":"GBP","in_stock":true},{"title":"Track","offer_id":58532171448701,"sku":"NTCAU012ER3TDS","price":7812.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/5767\/7352\/files\/NitronR3-1_e61f1bd8-3ea5-44bd-9a35-90823c0494fd.jpg?v=1786634130"},{"product_id":"nitron-elec-tron-r3-coilovers-bmw-m3-gts-e92-05-13","title":"Nitron elec-TRON R3 Coilovers BMW M3 GTS E92 05-13","description":"\u003ch2\u003eNitron elec-TRON R3 Coilovers\u003c\/h2\u003e \u003cem\u003ePlease note: This kit uses the’s DNA electronic control system, so no additional products are required.\u003c\/em\u003e \u003cp\u003eThe elec-TRON R3 coilover kit combines the Nitron proportional solenoid valve with independent manual compression control. Designed for enthusiasts or professionals looking to further optimise their vehicle’s suspension performance for more extreme driving conditions and a higher level of performance. Piggyback or remotely mounted reservoirs allow quick and simple independent adjustment of high-speed and low-speed compression damping.\u003c\/p\u003e \u003cul\u003e \u003cli\u003e16 high-speed and 26 low-speed clicks, setting the baseline for the semi active system\u003c\/li\u003e \u003cli\u003eAdjustable top mounts and race springs\u003c\/li\u003e \u003cli\u003eRemote reservoirs for quick and simple compression adjustment\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e\u003cstrong\u003eTake the Next Step in Suspension Innovation\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eThe Nitron \u003cem\u003eelec-TRON\u003c\/em\u003e range is a fusion of world-renowned Nitron quality and attention to detail, combined with cutting-edge electronic valve technology. At the heart of the system is Nitron’s proportional solenoid valve, delivering unparalleled precision and control over the damping system. Each shock absorber in the \u003cem\u003eelec-TRON\u003c\/em\u003e system is equipped with an independent valve, allowing for individual damping control at each wheel. This is essential for optimising handling, stability and ride comfort.\u003c\/p\u003e \u003cp\u003eThe \u003cem\u003eelec-TRON\u003c\/em\u003e proportional valve operates within a range of 300-1800mA, providing a broad adjustment capability and a rapid response time of just 6 to 8 milliseconds from full hard to full soft. This system governs both compression and rebound damping. The valve is piston rod-mounted, fine-tuning the bleed characteristics of the shim stack, and is integrated with Nitron’s gas-pressurized mono-tube construction, ensuring maximum performance and reliability. This valve is compatible with both the R1 (electronic adjustment only) and the R3 (manual high and low-speed compression adjustment).\u003c\/p\u003e \u003cp\u003eIn the R3, the manual settings establish a baseline for the adjustments made by the main \u003cem\u003eelec-TRON\u003c\/em\u003e valve. The system can precisely adjust damping force based on a variety of factors such as g-load conditions, vehicle speed, road surface, and driver input. This results in highly accurate and responsive damping, significantly enhancing the overall performance of the vehicle.\u003c\/p\u003e \u003cp\u003eNote: Image used for illustration purposes only. Specific details, finishes and end fittings may differ from that shown.\u003cbr\u003e\u003c\/p\u003e \u003cp\u003eAll Nitron shocks are hand made to order to each individual customer's requirements. Lead times are normally 2 - 3 weeks, but at certain times may be slightly longer. If you would like a more accurate delivery time please contact us.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003ePlease note:\u003c\/strong\u003e this kit requires the Nitron Damper Control Unit (DCU) to operate.\u003c\/p\u003e","brand":"Nitron","offers":[{"title":"Road","offer_id":58532171481469,"sku":"NTCBM014ER3FRS","price":7668.0,"currency_code":"GBP","in_stock":true},{"title":"Track","offer_id":58532171514237,"sku":"NTCBM014ER3TDS","price":7668.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/5767\/7352\/files\/NTCBM014ER3-01.jpg?v=1786634130"},{"product_id":"nitron-elec-tron-r3-coilovers-bmw-m3-f80-14-18","title":"Nitron elec-TRON R3 Coilovers BMW M3 F80 14-18","description":"\u003ch2\u003eNitron elec-TRON R3 Coilovers\u003c\/h2\u003e \u003cem\u003ePlease note: This kit uses the’s DNA electronic control system, so no additional products are required.\u003c\/em\u003e \u003cp\u003eThe elec-TRON R3 coilover kit combines the Nitron proportional solenoid valve with independent manual compression control. Designed for enthusiasts or professionals looking to further optimise their vehicle’s suspension performance for more extreme driving conditions and a higher level of performance. Piggyback or remotely mounted reservoirs allow quick and simple independent adjustment of high-speed and low-speed compression damping.\u003c\/p\u003e \u003cul\u003e \u003cli\u003e16 high-speed and 26 low-speed clicks, setting the baseline for the semi active system\u003c\/li\u003e \u003cli\u003eAdjustable top mounts and race springs\u003c\/li\u003e \u003cli\u003eRemote reservoirs for quick and simple compression adjustment\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e\u003cstrong\u003eTake the Next Step in Suspension Innovation\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eThe Nitron \u003cem\u003eelec-TRON\u003c\/em\u003e range is a fusion of world-renowned Nitron quality and attention to detail, combined with cutting-edge electronic valve technology. At the heart of the system is Nitron’s proportional solenoid valve, delivering unparalleled precision and control over the damping system. Each shock absorber in the \u003cem\u003eelec-TRON\u003c\/em\u003e system is equipped with an independent valve, allowing for individual damping control at each wheel. This is essential for optimising handling, stability and ride comfort.\u003c\/p\u003e \u003cp\u003eThe \u003cem\u003eelec-TRON\u003c\/em\u003e proportional valve operates within a range of 300-1800mA, providing a broad adjustment capability and a rapid response time of just 6 to 8 milliseconds from full hard to full soft. This system governs both compression and rebound damping. The valve is piston rod-mounted, fine-tuning the bleed characteristics of the shim stack, and is integrated with Nitron’s gas-pressurized mono-tube construction, ensuring maximum performance and reliability. This valve is compatible with both the R1 (electronic adjustment only) and the R3 (manual high and low-speed compression adjustment).\u003c\/p\u003e \u003cp\u003eIn the R3, the manual settings establish a baseline for the adjustments made by the main \u003cem\u003eelec-TRON\u003c\/em\u003e valve. The system can precisely adjust damping force based on a variety of factors such as g-load conditions, vehicle speed, road surface, and driver input. This results in highly accurate and responsive damping, significantly enhancing the overall performance of the vehicle.\u003c\/p\u003e \u003cp\u003eNote: Image used for illustration purposes only. Specific details, finishes and end fittings may differ from that shown.\u003cbr\u003e\u003c\/p\u003e \u003cp\u003eAll Nitron shocks are hand made to order to each individual customer's requirements. Lead times are normally 2 - 3 weeks, but at certain times may be slightly longer. If you would like a more accurate delivery time please contact us.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003ePlease note:\u003c\/strong\u003e this kit requires the Nitron Damper Control Unit (DCU) to operate.\u003c\/p\u003e","brand":"Nitron","offers":[{"title":"Road","offer_id":58532171547005,"sku":"NTCBM027ER3FRS","price":7668.0,"currency_code":"GBP","in_stock":true},{"title":"Track","offer_id":58532171579773,"sku":"NTCBM027ER3TDS","price":7668.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/5767\/7352\/files\/NTCBM027ER3-01.jpg?v=1786634132"},{"product_id":"nitron-elec-tron-r3-coilovers-lamborghini-gallardo-03-14","title":"Nitron elec-TRON R3 Coilovers Lamborghini Gallardo 03-14","description":"\u003ch2\u003eNitron elec-TRON R3 Coilovers\u003c\/h2\u003e \u003cem\u003ePlease note: This kit uses the’s DNA electronic control system, so no additional products are required.\u003c\/em\u003e \u003cp\u003eThe elec-TRON R3 coilover kit combines the Nitron proportional solenoid valve with independent manual compression control. Designed for enthusiasts or professionals looking to further optimise their vehicle’s suspension performance for more extreme driving conditions and a higher level of performance. Piggyback or remotely mounted reservoirs allow quick and simple independent adjustment of high-speed and low-speed compression damping.\u003c\/p\u003e \u003cul\u003e \u003cli\u003e16 high-speed and 26 low-speed clicks, setting the baseline for the semi active system\u003c\/li\u003e \u003cli\u003eAdjustable top mounts and race springs\u003c\/li\u003e \u003cli\u003eRemote reservoirs for quick and simple compression adjustment\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e\u003cstrong\u003eTake the Next Step in Suspension Innovation\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eThe Nitron \u003cem\u003eelec-TRON\u003c\/em\u003e range is a fusion of world-renowned Nitron quality and attention to detail, combined with cutting-edge electronic valve technology. At the heart of the system is Nitron’s proportional solenoid valve, delivering unparalleled precision and control over the damping system. Each shock absorber in the \u003cem\u003eelec-TRON\u003c\/em\u003e system is equipped with an independent valve, allowing for individual damping control at each wheel. This is essential for optimising handling, stability and ride comfort.\u003c\/p\u003e \u003cp\u003eThe \u003cem\u003eelec-TRON\u003c\/em\u003e proportional valve operates within a range of 300-1800mA, providing a broad adjustment capability and a rapid response time of just 6 to 8 milliseconds from full hard to full soft. This system governs both compression and rebound damping. The valve is piston rod-mounted, fine-tuning the bleed characteristics of the shim stack, and is integrated with Nitron’s gas-pressurized mono-tube construction, ensuring maximum performance and reliability. This valve is compatible with both the R1 (electronic adjustment only) and the R3 (manual high and low-speed compression adjustment).\u003c\/p\u003e \u003cp\u003eIn the R3, the manual settings establish a baseline for the adjustments made by the main \u003cem\u003eelec-TRON\u003c\/em\u003e valve. The system can precisely adjust damping force based on a variety of factors such as g-load conditions, vehicle speed, road surface, and driver input. This results in highly accurate and responsive damping, significantly enhancing the overall performance of the vehicle.\u003c\/p\u003e \u003cp\u003eNote: Image used for illustration purposes only. Specific details, finishes and end fittings may differ from that shown.\u003cbr\u003e\u003c\/p\u003e \u003cp\u003eAll Nitron shocks are hand made to order to each individual customer's requirements. Lead times are normally 2 - 3 weeks, but at certain times may be slightly longer. If you would like a more accurate delivery time please contact us.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003ePlease note:\u003c\/strong\u003e this kit requires the Nitron Damper Control Unit (DCU) to operate.\u003c\/p\u003e","brand":"Nitron","offers":[{"title":"Default Title","offer_id":58532171612541,"sku":"NTCLA010ER3","price":6306.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/5767\/7352\/files\/NitronR3-1_71d08d31-aefc-46b6-9c4b-92c9811d7988.jpg?v=1786634128"},{"product_id":"nitron-elec-tron-r3-coilovers-bmw-m3-f80-14-18-with-standalone-fal","title":"Nitron elec-TRON R3 Coilovers BMW M3 F80 14-18 With Standalone FAL","description":"\u003ch2\u003eNitron elec-TRON R3 Coilovers\u003c\/h2\u003e \u003cem\u003ePlease note: This kit uses the’s DNA electronic control system, so no additional products are required.\u003c\/em\u003e \u003cp\u003eThe elec-TRON R3 coilover kit combines the Nitron proportional solenoid valve with independent manual compression control. Designed for enthusiasts or professionals looking to further optimise their vehicle’s suspension performance for more extreme driving conditions and a higher level of performance. Piggyback or remotely mounted reservoirs allow quick and simple independent adjustment of high-speed and low-speed compression damping.\u003c\/p\u003e \u003cul\u003e \u003cli\u003e16 high-speed and 26 low-speed clicks, setting the baseline for the semi active system\u003c\/li\u003e \u003cli\u003eAdjustable top mounts and race springs\u003c\/li\u003e \u003cli\u003eRemote reservoirs for quick and simple compression adjustment\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e\u003cstrong\u003eTake the Next Step in Suspension Innovation\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eThe Nitron \u003cem\u003eelec-TRON\u003c\/em\u003e range is a fusion of world-renowned Nitron quality and attention to detail, combined with cutting-edge electronic valve technology. At the heart of the system is Nitron’s proportional solenoid valve, delivering unparalleled precision and control over the damping system. Each shock absorber in the \u003cem\u003eelec-TRON\u003c\/em\u003e system is equipped with an independent valve, allowing for individual damping control at each wheel. This is essential for optimising handling, stability and ride comfort.\u003c\/p\u003e \u003cp\u003eThe \u003cem\u003eelec-TRON\u003c\/em\u003e proportional valve operates within a range of 300-1800mA, providing a broad adjustment capability and a rapid response time of just 6 to 8 milliseconds from full hard to full soft. This system governs both compression and rebound damping. The valve is piston rod-mounted, fine-tuning the bleed characteristics of the shim stack, and is integrated with Nitron’s gas-pressurized mono-tube construction, ensuring maximum performance and reliability. This valve is compatible with both the R1 (electronic adjustment only) and the R3 (manual high and low-speed compression adjustment).\u003c\/p\u003e \u003cp\u003eIn the R3, the manual settings establish a baseline for the adjustments made by the main \u003cem\u003eelec-TRON\u003c\/em\u003e valve. The system can precisely adjust damping force based on a variety of factors such as g-load conditions, vehicle speed, road surface, and driver input. This results in highly accurate and responsive damping, significantly enhancing the overall performance of the vehicle.\u003c\/p\u003e \u003cp\u003eNote: Image used for illustration purposes only. Specific details, finishes and end fittings may differ from that shown.\u003cbr\u003e\u003c\/p\u003e \u003cp\u003eAll Nitron shocks are hand made to order to each individual customer's requirements. Lead times are normally 2 - 3 weeks, but at certain times may be slightly longer. If you would like a more accurate delivery time please contact us.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003ePlease note:\u003c\/strong\u003e this kit requires the Nitron Damper Control Unit (DCU) to operate.\u003c\/p\u003e\u003ch3\u003eFront Axle Lift (FAL)\u003c\/h3\u003e\u003cp\u003eThis kit is supplied with the Nitron standalone Front Axle Lift system, letting you raise the front axle to clear speed bumps, ramps and steep driveways without affecting damping performance.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKey features:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eKit contains all components – lift cylinders, hydraulic lines, pump, mounting bracket, wiring loom and controller\u003c\/li\u003e\n\u003cli\u003e250W pump, typical lift time under 3 seconds\u003c\/li\u003e\n\u003cli\u003eAudible in-cabin warning system and switch with built-in warning light\u003c\/li\u003e\n\u003cli\u003eAuto-off function\u003c\/li\u003e\n\u003cli\u003eLift height varies by application – see the specification table below\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Nitron","offers":[{"title":"Road","offer_id":58532171645309,"sku":"NTCBM027ER3FRS+FAL","price":10848.0,"currency_code":"GBP","in_stock":true},{"title":"Track","offer_id":58532171678077,"sku":"NTCBM027ER3TDS+FAL","price":10848.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/5767\/7352\/files\/NitronR3wFal-1_cb013966-f155-42a4-a146-9a5d31eae551.jpg?v=1786634130"},{"product_id":"nitron-elec-tron-r3-coilovers-lamborghini-gallardo-03-14-with-fal-cylinders","title":"Nitron elec-TRON R3 Coilovers Lamborghini Gallardo 03-14 With FAL Cylinders","description":"\u003ch2\u003eNitron elec-TRON R3 Coilovers\u003c\/h2\u003e \u003cem\u003ePlease note: This kit uses the’s DNA electronic control system, so no additional products are required.\u003c\/em\u003e \u003cp\u003eThe elec-TRON R3 coilover kit combines the Nitron proportional solenoid valve with independent manual compression control. Designed for enthusiasts or professionals looking to further optimise their vehicle’s suspension performance for more extreme driving conditions and a higher level of performance. Piggyback or remotely mounted reservoirs allow quick and simple independent adjustment of high-speed and low-speed compression damping.\u003c\/p\u003e \u003cul\u003e \u003cli\u003e16 high-speed and 26 low-speed clicks, setting the baseline for the semi active system\u003c\/li\u003e \u003cli\u003eAdjustable top mounts and race springs\u003c\/li\u003e \u003cli\u003eRemote reservoirs for quick and simple compression adjustment\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e\u003cstrong\u003eTake the Next Step in Suspension Innovation\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eThe Nitron \u003cem\u003eelec-TRON\u003c\/em\u003e range is a fusion of world-renowned Nitron quality and attention to detail, combined with cutting-edge electronic valve technology. At the heart of the system is Nitron’s proportional solenoid valve, delivering unparalleled precision and control over the damping system. Each shock absorber in the \u003cem\u003eelec-TRON\u003c\/em\u003e system is equipped with an independent valve, allowing for individual damping control at each wheel. This is essential for optimising handling, stability and ride comfort.\u003c\/p\u003e \u003cp\u003eThe \u003cem\u003eelec-TRON\u003c\/em\u003e proportional valve operates within a range of 300-1800mA, providing a broad adjustment capability and a rapid response time of just 6 to 8 milliseconds from full hard to full soft. This system governs both compression and rebound damping. The valve is piston rod-mounted, fine-tuning the bleed characteristics of the shim stack, and is integrated with Nitron’s gas-pressurized mono-tube construction, ensuring maximum performance and reliability. This valve is compatible with both the R1 (electronic adjustment only) and the R3 (manual high and low-speed compression adjustment).\u003c\/p\u003e \u003cp\u003eIn the R3, the manual settings establish a baseline for the adjustments made by the main \u003cem\u003eelec-TRON\u003c\/em\u003e valve. The system can precisely adjust damping force based on a variety of factors such as g-load conditions, vehicle speed, road surface, and driver input. This results in highly accurate and responsive damping, significantly enhancing the overall performance of the vehicle.\u003c\/p\u003e \u003cp\u003eNote: Image used for illustration purposes only. Specific details, finishes and end fittings may differ from that shown.\u003cbr\u003e\u003c\/p\u003e \u003cp\u003eAll Nitron shocks are hand made to order to each individual customer's requirements. Lead times are normally 2 - 3 weeks, but at certain times may be slightly longer. If you would like a more accurate delivery time please contact us.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003ePlease note:\u003c\/strong\u003e this kit requires the Nitron Damper Control Unit (DCU) to operate.\u003c\/p\u003e\u003ch3\u003eFAL Cylinders\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003ePlease note:\u003c\/strong\u003e this kit contains Nitron Front Axle Lift cylinders only – no pump, loom or controller. The cylinders link to your vehicle’s OEM hydraulic lift system, retaining full factory lift functionality alongside Nitron damping. Lift height varies by application – see the specification table below.\u003c\/p\u003e","brand":"Nitron","offers":[{"title":"Default Title","offer_id":58532171710845,"sku":"NTCLA010ER3+CYL","price":7044.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/5767\/7352\/files\/NitronR3wCylinders-1.jpg?v=1786634126"},{"product_id":"nitron-elec-tron-r3-coilovers-bmw-z4-roadster-g29-18","title":"Nitron elec-TRON R3 Coilovers BMW Z4 Roadster G29 18+","description":"\u003ch2\u003eNitron elec-TRON R3 Coilovers\u003c\/h2\u003e \u003cem\u003ePlease note: This kit uses the’s DNA electronic control system, so no additional products are required.\u003c\/em\u003e \u003cp\u003eThe elec-TRON R3 coilover kit combines the Nitron proportional solenoid valve with independent manual compression control. Designed for enthusiasts or professionals looking to further optimise their vehicle’s suspension performance for more extreme driving conditions and a higher level of performance. Piggyback or remotely mounted reservoirs allow quick and simple independent adjustment of high-speed and low-speed compression damping.\u003c\/p\u003e \u003cul\u003e \u003cli\u003e16 high-speed and 26 low-speed clicks, setting the baseline for the semi active system\u003c\/li\u003e \u003cli\u003eAdjustable top mounts and race springs\u003c\/li\u003e \u003cli\u003eRemote reservoirs for quick and simple compression adjustment\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e\u003cstrong\u003eTake the Next Step in Suspension Innovation\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eThe Nitron \u003cem\u003eelec-TRON\u003c\/em\u003e range is a fusion of world-renowned Nitron quality and attention to detail, combined with cutting-edge electronic valve technology. At the heart of the system is Nitron’s proportional solenoid valve, delivering unparalleled precision and control over the damping system. Each shock absorber in the \u003cem\u003eelec-TRON\u003c\/em\u003e system is equipped with an independent valve, allowing for individual damping control at each wheel. This is essential for optimising handling, stability and ride comfort.\u003c\/p\u003e \u003cp\u003eThe \u003cem\u003eelec-TRON\u003c\/em\u003e proportional valve operates within a range of 300-1800mA, providing a broad adjustment capability and a rapid response time of just 6 to 8 milliseconds from full hard to full soft. This system governs both compression and rebound damping. The valve is piston rod-mounted, fine-tuning the bleed characteristics of the shim stack, and is integrated with Nitron’s gas-pressurized mono-tube construction, ensuring maximum performance and reliability. This valve is compatible with both the R1 (electronic adjustment only) and the R3 (manual high and low-speed compression adjustment).\u003c\/p\u003e \u003cp\u003eIn the R3, the manual settings establish a baseline for the adjustments made by the main \u003cem\u003eelec-TRON\u003c\/em\u003e valve. The system can precisely adjust damping force based on a variety of factors such as g-load conditions, vehicle speed, road surface, and driver input. This results in highly accurate and responsive damping, significantly enhancing the overall performance of the vehicle.\u003c\/p\u003e \u003cp\u003eNote: Image used for illustration purposes only. Specific details, finishes and end fittings may differ from that shown.\u003cbr\u003e\u003c\/p\u003e \u003cp\u003eAll Nitron shocks are hand made to order to each individual customer's requirements. Lead times are normally 2 - 3 weeks, but at certain times may be slightly longer. If you would like a more accurate delivery time please contact us.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003ePlease note:\u003c\/strong\u003e this kit requires the Nitron Damper Control Unit (DCU) to operate.\u003c\/p\u003e","brand":"Nitron","offers":[{"title":"Default Title","offer_id":58532171743613,"sku":"NTCBM039ER3","price":7668.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/5767\/7352\/files\/NitronR3-1_d634dc18-ea05-4496-be3a-562b9f212088.jpg?v=1786634128"},{"product_id":"nitron-elec-tron-r3-coilovers-audi-r8-4s-15-with-standalone-fal","title":"Nitron elec-TRON R3 Coilovers Audi R8 4S 15+ With Standalone FAL","description":"\u003ch2\u003eNitron elec-TRON R3 Coilovers\u003c\/h2\u003e \u003cem\u003ePlease note: This kit uses the’s DNA electronic control system, so no additional products are required.\u003c\/em\u003e \u003cp\u003eThe elec-TRON R3 coilover kit combines the Nitron proportional solenoid valve with independent manual compression control. Designed for enthusiasts or professionals looking to further optimise their vehicle’s suspension performance for more extreme driving conditions and a higher level of performance. Piggyback or remotely mounted reservoirs allow quick and simple independent adjustment of high-speed and low-speed compression damping.\u003c\/p\u003e \u003cul\u003e \u003cli\u003e16 high-speed and 26 low-speed clicks, setting the baseline for the semi active system\u003c\/li\u003e \u003cli\u003eAdjustable top mounts and race springs\u003c\/li\u003e \u003cli\u003eRemote reservoirs for quick and simple compression adjustment\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e\u003cstrong\u003eTake the Next Step in Suspension Innovation\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eThe Nitron \u003cem\u003eelec-TRON\u003c\/em\u003e range is a fusion of world-renowned Nitron quality and attention to detail, combined with cutting-edge electronic valve technology. At the heart of the system is Nitron’s proportional solenoid valve, delivering unparalleled precision and control over the damping system. Each shock absorber in the \u003cem\u003eelec-TRON\u003c\/em\u003e system is equipped with an independent valve, allowing for individual damping control at each wheel. This is essential for optimising handling, stability and ride comfort.\u003c\/p\u003e \u003cp\u003eThe \u003cem\u003eelec-TRON\u003c\/em\u003e proportional valve operates within a range of 300-1800mA, providing a broad adjustment capability and a rapid response time of just 6 to 8 milliseconds from full hard to full soft. This system governs both compression and rebound damping. The valve is piston rod-mounted, fine-tuning the bleed characteristics of the shim stack, and is integrated with Nitron’s gas-pressurized mono-tube construction, ensuring maximum performance and reliability. This valve is compatible with both the R1 (electronic adjustment only) and the R3 (manual high and low-speed compression adjustment).\u003c\/p\u003e \u003cp\u003eIn the R3, the manual settings establish a baseline for the adjustments made by the main \u003cem\u003eelec-TRON\u003c\/em\u003e valve. The system can precisely adjust damping force based on a variety of factors such as g-load conditions, vehicle speed, road surface, and driver input. This results in highly accurate and responsive damping, significantly enhancing the overall performance of the vehicle.\u003c\/p\u003e \u003cp\u003eNote: Image used for illustration purposes only. Specific details, finishes and end fittings may differ from that shown.\u003cbr\u003e\u003c\/p\u003e \u003cp\u003eAll Nitron shocks are hand made to order to each individual customer's requirements. Lead times are normally 2 - 3 weeks, but at certain times may be slightly longer. If you would like a more accurate delivery time please contact us.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003ePlease note:\u003c\/strong\u003e this kit requires the Nitron Damper Control Unit (DCU) to operate.\u003c\/p\u003e\u003ch3\u003eFront Axle Lift (FAL)\u003c\/h3\u003e\u003cp\u003eThis kit is supplied with the Nitron standalone Front Axle Lift system, letting you raise the front axle to clear speed bumps, ramps and steep driveways without affecting damping performance.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKey features:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eKit contains all components – lift cylinders, hydraulic lines, pump, mounting bracket, wiring loom and controller\u003c\/li\u003e\n\u003cli\u003e250W pump, typical lift time under 3 seconds\u003c\/li\u003e\n\u003cli\u003eAudible in-cabin warning system and switch with built-in warning light\u003c\/li\u003e\n\u003cli\u003eAuto-off function\u003c\/li\u003e\n\u003cli\u003eLift height varies by application – see the specification table below\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Nitron","offers":[{"title":"Road","offer_id":58532171776381,"sku":"NTCAU012ER3FRS+FAL","price":10992.0,"currency_code":"GBP","in_stock":true},{"title":"Track","offer_id":58532171809149,"sku":"NTCAU012ER3TDS+FAL","price":10992.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/5767\/7352\/files\/NTCAU012ER3-FAL-02.jpg?v=1786634130"},{"product_id":"nitron-elec-tron-r3-coilovers-audi-rs3-sportback-8v-quattro-12","title":"Nitron elec-TRON R3 Coilovers Audi RS3 Sportback 8V Quattro 12+","description":"\u003ch2\u003eNitron elec-TRON R3 Coilovers\u003c\/h2\u003e \u003cem\u003ePlease note: This kit uses the’s DNA electronic control system, so no additional products are required.\u003c\/em\u003e \u003cp\u003eThe elec-TRON R3 coilover kit combines the Nitron proportional solenoid valve with independent manual compression control. Designed for enthusiasts or professionals looking to further optimise their vehicle’s suspension performance for more extreme driving conditions and a higher level of performance. Piggyback or remotely mounted reservoirs allow quick and simple independent adjustment of high-speed and low-speed compression damping.\u003c\/p\u003e \u003cul\u003e \u003cli\u003e16 high-speed and 26 low-speed clicks, setting the baseline for the semi active system\u003c\/li\u003e \u003cli\u003eAdjustable top mounts and race springs\u003c\/li\u003e \u003cli\u003eRemote reservoirs for quick and simple compression adjustment\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e\u003cstrong\u003eTake the Next Step in Suspension Innovation\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eThe Nitron \u003cem\u003eelec-TRON\u003c\/em\u003e range is a fusion of world-renowned Nitron quality and attention to detail, combined with cutting-edge electronic valve technology. At the heart of the system is Nitron’s proportional solenoid valve, delivering unparalleled precision and control over the damping system. Each shock absorber in the \u003cem\u003eelec-TRON\u003c\/em\u003e system is equipped with an independent valve, allowing for individual damping control at each wheel. This is essential for optimising handling, stability and ride comfort.\u003c\/p\u003e \u003cp\u003eThe \u003cem\u003eelec-TRON\u003c\/em\u003e proportional valve operates within a range of 300-1800mA, providing a broad adjustment capability and a rapid response time of just 6 to 8 milliseconds from full hard to full soft. This system governs both compression and rebound damping. The valve is piston rod-mounted, fine-tuning the bleed characteristics of the shim stack, and is integrated with Nitron’s gas-pressurized mono-tube construction, ensuring maximum performance and reliability. This valve is compatible with both the R1 (electronic adjustment only) and the R3 (manual high and low-speed compression adjustment).\u003c\/p\u003e \u003cp\u003eIn the R3, the manual settings establish a baseline for the adjustments made by the main \u003cem\u003eelec-TRON\u003c\/em\u003e valve. The system can precisely adjust damping force based on a variety of factors such as g-load conditions, vehicle speed, road surface, and driver input. This results in highly accurate and responsive damping, significantly enhancing the overall performance of the vehicle.\u003c\/p\u003e \u003cp\u003eNote: Image used for illustration purposes only. Specific details, finishes and end fittings may differ from that shown.\u003cbr\u003e\u003c\/p\u003e \u003cp\u003eAll Nitron shocks are hand made to order to each individual customer's requirements. Lead times are normally 2 - 3 weeks, but at certain times may be slightly longer. If you would like a more accurate delivery time please contact us.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003ePlease note:\u003c\/strong\u003e this kit requires the Nitron Damper Control Unit (DCU) to operate.\u003c\/p\u003e","brand":"Nitron","offers":[{"title":"Road","offer_id":58532171841917,"sku":"NTCAU014ER3FRS","price":7194.0,"currency_code":"GBP","in_stock":true},{"title":"Track","offer_id":58532171874685,"sku":"NTCAU014ER3TDS","price":7194.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/5767\/7352\/files\/NitronR3-1_33baa0a8-cdb9-42e3-b18c-d1b8820b2606.jpg?v=1786634130"},{"product_id":"nitron-elec-tron-r3-coilovers-chevrolet-corvette-competition-c7-14-19","title":"Nitron elec-TRON R3 Coilovers Chevrolet Corvette Competition C7 14-19","description":"\u003ch2\u003eNitron elec-TRON R3 Coilovers\u003c\/h2\u003e \u003cem\u003ePlease note: This kit uses the’s DNA electronic control system, so no additional products are required.\u003c\/em\u003e \u003cp\u003eThe elec-TRON R3 coilover kit combines the Nitron proportional solenoid valve with independent manual compression control. Designed for enthusiasts or professionals looking to further optimise their vehicle’s suspension performance for more extreme driving conditions and a higher level of performance. Piggyback or remotely mounted reservoirs allow quick and simple independent adjustment of high-speed and low-speed compression damping.\u003c\/p\u003e \u003cul\u003e \u003cli\u003e16 high-speed and 26 low-speed clicks, setting the baseline for the semi active system\u003c\/li\u003e \u003cli\u003eAdjustable top mounts and race springs\u003c\/li\u003e \u003cli\u003eRemote reservoirs for quick and simple compression adjustment\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e\u003cstrong\u003eTake the Next Step in Suspension Innovation\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eThe Nitron \u003cem\u003eelec-TRON\u003c\/em\u003e range is a fusion of world-renowned Nitron quality and attention to detail, combined with cutting-edge electronic valve technology. At the heart of the system is Nitron’s proportional solenoid valve, delivering unparalleled precision and control over the damping system. Each shock absorber in the \u003cem\u003eelec-TRON\u003c\/em\u003e system is equipped with an independent valve, allowing for individual damping control at each wheel. This is essential for optimising handling, stability and ride comfort.\u003c\/p\u003e \u003cp\u003eThe \u003cem\u003eelec-TRON\u003c\/em\u003e proportional valve operates within a range of 300-1800mA, providing a broad adjustment capability and a rapid response time of just 6 to 8 milliseconds from full hard to full soft. This system governs both compression and rebound damping. The valve is piston rod-mounted, fine-tuning the bleed characteristics of the shim stack, and is integrated with Nitron’s gas-pressurized mono-tube construction, ensuring maximum performance and reliability. This valve is compatible with both the R1 (electronic adjustment only) and the R3 (manual high and low-speed compression adjustment).\u003c\/p\u003e \u003cp\u003eIn the R3, the manual settings establish a baseline for the adjustments made by the main \u003cem\u003eelec-TRON\u003c\/em\u003e valve. The system can precisely adjust damping force based on a variety of factors such as g-load conditions, vehicle speed, road surface, and driver input. This results in highly accurate and responsive damping, significantly enhancing the overall performance of the vehicle.\u003c\/p\u003e \u003cp\u003eNote: Image used for illustration purposes only. Specific details, finishes and end fittings may differ from that shown.\u003cbr\u003e\u003c\/p\u003e \u003cp\u003eAll Nitron shocks are hand made to order to each individual customer's requirements. Lead times are normally 2 - 3 weeks, but at certain times may be slightly longer. If you would like a more accurate delivery time please contact us.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003ePlease note:\u003c\/strong\u003e this kit requires the Nitron Damper Control Unit (DCU) to operate.\u003c\/p\u003e","brand":"Nitron","offers":[{"title":"Road","offer_id":58532172235133,"sku":"NTCCH011ER3FRS","price":6672.0,"currency_code":"GBP","in_stock":true},{"title":"Track","offer_id":58532172267901,"sku":"NTCCH011ER3TDS","price":6672.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/5767\/7352\/files\/NitronR3-1_ebe3bf23-8a51-4d35-81b7-e577869787bf.jpg?v=1786634130"},{"product_id":"nitron-elec-tron-r3-coilovers-bmw-m2-f87-15-21","title":"Nitron elec-TRON R3 Coilovers BMW M2 F87 15-21","description":"\u003ch2\u003eNitron elec-TRON R3 Coilovers\u003c\/h2\u003e \u003cem\u003ePlease note: This kit uses the’s DNA electronic control system, so no additional products are required.\u003c\/em\u003e \u003cp\u003eThe elec-TRON R3 coilover kit combines the Nitron proportional solenoid valve with independent manual compression control. Designed for enthusiasts or professionals looking to further optimise their vehicle’s suspension performance for more extreme driving conditions and a higher level of performance. Piggyback or remotely mounted reservoirs allow quick and simple independent adjustment of high-speed and low-speed compression damping.\u003c\/p\u003e \u003cul\u003e \u003cli\u003e16 high-speed and 26 low-speed clicks, setting the baseline for the semi active system\u003c\/li\u003e \u003cli\u003eAdjustable top mounts and race springs\u003c\/li\u003e \u003cli\u003eRemote reservoirs for quick and simple compression adjustment\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e\u003cstrong\u003eTake the Next Step in Suspension Innovation\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eThe Nitron \u003cem\u003eelec-TRON\u003c\/em\u003e range is a fusion of world-renowned Nitron quality and attention to detail, combined with cutting-edge electronic valve technology. At the heart of the system is Nitron’s proportional solenoid valve, delivering unparalleled precision and control over the damping system. Each shock absorber in the \u003cem\u003eelec-TRON\u003c\/em\u003e system is equipped with an independent valve, allowing for individual damping control at each wheel. This is essential for optimising handling, stability and ride comfort.\u003c\/p\u003e \u003cp\u003eThe \u003cem\u003eelec-TRON\u003c\/em\u003e proportional valve operates within a range of 300-1800mA, providing a broad adjustment capability and a rapid response time of just 6 to 8 milliseconds from full hard to full soft. This system governs both compression and rebound damping. The valve is piston rod-mounted, fine-tuning the bleed characteristics of the shim stack, and is integrated with Nitron’s gas-pressurized mono-tube construction, ensuring maximum performance and reliability. This valve is compatible with both the R1 (electronic adjustment only) and the R3 (manual high and low-speed compression adjustment).\u003c\/p\u003e \u003cp\u003eIn the R3, the manual settings establish a baseline for the adjustments made by the main \u003cem\u003eelec-TRON\u003c\/em\u003e valve. The system can precisely adjust damping force based on a variety of factors such as g-load conditions, vehicle speed, road surface, and driver input. This results in highly accurate and responsive damping, significantly enhancing the overall performance of the vehicle.\u003c\/p\u003e \u003cp\u003eNote: Image used for illustration purposes only. Specific details, finishes and end fittings may differ from that shown.\u003cbr\u003e\u003c\/p\u003e \u003cp\u003eAll Nitron shocks are hand made to order to each individual customer's requirements. Lead times are normally 2 - 3 weeks, but at certain times may be slightly longer. If you would like a more accurate delivery time please contact us.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003ePlease note:\u003c\/strong\u003e this kit requires the Nitron Damper Control Unit (DCU) to operate.\u003c\/p\u003e","brand":"Nitron","offers":[{"title":"Road","offer_id":58532172104061,"sku":"NTCBM023ER3FRS","price":7668.0,"currency_code":"GBP","in_stock":true},{"title":"Track","offer_id":58532172136829,"sku":"NTCBM023ER3TDS","price":7668.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/5767\/7352\/files\/NTCBM023ER3-01.jpg?v=1786634131"},{"product_id":"nitron-elec-tron-r3-coilovers-ford-mustang-s550-15-23","title":"Nitron elec-TRON R3 Coilovers Ford Mustang S550 15-23","description":"\u003ch2\u003eNitron elec-TRON R3 Coilovers\u003c\/h2\u003e \u003cem\u003ePlease note: This kit uses the’s DNA electronic control system, so no additional products are required.\u003c\/em\u003e \u003cp\u003eThe elec-TRON R3 coilover kit combines the Nitron proportional solenoid valve with independent manual compression control. Designed for enthusiasts or professionals looking to further optimise their vehicle’s suspension performance for more extreme driving conditions and a higher level of performance. Piggyback or remotely mounted reservoirs allow quick and simple independent adjustment of high-speed and low-speed compression damping.\u003c\/p\u003e \u003cul\u003e \u003cli\u003e16 high-speed and 26 low-speed clicks, setting the baseline for the semi active system\u003c\/li\u003e \u003cli\u003eAdjustable top mounts and race springs\u003c\/li\u003e \u003cli\u003eRemote reservoirs for quick and simple compression adjustment\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e\u003cstrong\u003eTake the Next Step in Suspension Innovation\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eThe Nitron \u003cem\u003eelec-TRON\u003c\/em\u003e range is a fusion of world-renowned Nitron quality and attention to detail, combined with cutting-edge electronic valve technology. At the heart of the system is Nitron’s proportional solenoid valve, delivering unparalleled precision and control over the damping system. Each shock absorber in the \u003cem\u003eelec-TRON\u003c\/em\u003e system is equipped with an independent valve, allowing for individual damping control at each wheel. This is essential for optimising handling, stability and ride comfort.\u003c\/p\u003e \u003cp\u003eThe \u003cem\u003eelec-TRON\u003c\/em\u003e proportional valve operates within a range of 300-1800mA, providing a broad adjustment capability and a rapid response time of just 6 to 8 milliseconds from full hard to full soft. This system governs both compression and rebound damping. The valve is piston rod-mounted, fine-tuning the bleed characteristics of the shim stack, and is integrated with Nitron’s gas-pressurized mono-tube construction, ensuring maximum performance and reliability. This valve is compatible with both the R1 (electronic adjustment only) and the R3 (manual high and low-speed compression adjustment).\u003c\/p\u003e \u003cp\u003eIn the R3, the manual settings establish a baseline for the adjustments made by the main \u003cem\u003eelec-TRON\u003c\/em\u003e valve. The system can precisely adjust damping force based on a variety of factors such as g-load conditions, vehicle speed, road surface, and driver input. This results in highly accurate and responsive damping, significantly enhancing the overall performance of the vehicle.\u003c\/p\u003e \u003cp\u003eNote: Image used for illustration purposes only. Specific details, finishes and end fittings may differ from that shown.\u003cbr\u003e\u003c\/p\u003e \u003cp\u003eAll Nitron shocks are hand made to order to each individual customer's requirements. Lead times are normally 2 - 3 weeks, but at certain times may be slightly longer. If you would like a more accurate delivery time please contact us.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003ePlease note:\u003c\/strong\u003e this kit requires the Nitron Damper Control Unit (DCU) to operate.\u003c\/p\u003e","brand":"Nitron","offers":[{"title":"Road","offer_id":58532172169597,"sku":"NTCFO019ER3FRS","price":8478.0,"currency_code":"GBP","in_stock":true},{"title":"Track","offer_id":58532172202365,"sku":"NTCFO019ER3TDS","price":8478.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/5767\/7352\/files\/NitronR3-1_5b94b877-4677-4e14-a1ba-d6bb828d6392.jpg?v=1786634132"},{"product_id":"nitron-elec-tron-r3-coilovers-nissan-skyline-r33-gt-r-95-98","title":"Nitron elec-TRON R3 Coilovers Nissan Skyline R33 GT-R 95-98","description":"\u003ch2\u003eNitron elec-TRON R3 Coilovers\u003c\/h2\u003e \u003cem\u003ePlease note: This kit uses the’s DNA electronic control system, so no additional products are required.\u003c\/em\u003e \u003cp\u003eThe elec-TRON R3 coilover kit combines the Nitron proportional solenoid valve with independent manual compression control. Designed for enthusiasts or professionals looking to further optimise their vehicle’s suspension performance for more extreme driving conditions and a higher level of performance. Piggyback or remotely mounted reservoirs allow quick and simple independent adjustment of high-speed and low-speed compression damping.\u003c\/p\u003e \u003cul\u003e \u003cli\u003e16 high-speed and 26 low-speed clicks, setting the baseline for the semi active system\u003c\/li\u003e \u003cli\u003eAdjustable top mounts and race springs\u003c\/li\u003e \u003cli\u003eRemote reservoirs for quick and simple compression adjustment\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e\u003cstrong\u003eTake the Next Step in Suspension Innovation\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eThe Nitron \u003cem\u003eelec-TRON\u003c\/em\u003e range is a fusion of world-renowned Nitron quality and attention to detail, combined with cutting-edge electronic valve technology. At the heart of the system is Nitron’s proportional solenoid valve, delivering unparalleled precision and control over the damping system. Each shock absorber in the \u003cem\u003eelec-TRON\u003c\/em\u003e system is equipped with an independent valve, allowing for individual damping control at each wheel. This is essential for optimising handling, stability and ride comfort.\u003c\/p\u003e \u003cp\u003eThe \u003cem\u003eelec-TRON\u003c\/em\u003e proportional valve operates within a range of 300-1800mA, providing a broad adjustment capability and a rapid response time of just 6 to 8 milliseconds from full hard to full soft. This system governs both compression and rebound damping. The valve is piston rod-mounted, fine-tuning the bleed characteristics of the shim stack, and is integrated with Nitron’s gas-pressurized mono-tube construction, ensuring maximum performance and reliability. This valve is compatible with both the R1 (electronic adjustment only) and the R3 (manual high and low-speed compression adjustment).\u003c\/p\u003e \u003cp\u003eIn the R3, the manual settings establish a baseline for the adjustments made by the main \u003cem\u003eelec-TRON\u003c\/em\u003e valve. The system can precisely adjust damping force based on a variety of factors such as g-load conditions, vehicle speed, road surface, and driver input. This results in highly accurate and responsive damping, significantly enhancing the overall performance of the vehicle.\u003c\/p\u003e \u003cp\u003eNote: Image used for illustration purposes only. Specific details, finishes and end fittings may differ from that shown.\u003cbr\u003e\u003c\/p\u003e \u003cp\u003eAll Nitron shocks are hand made to order to each individual customer's requirements. Lead times are normally 2 - 3 weeks, but at certain times may be slightly longer. If you would like a more accurate delivery time please contact us.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003ePlease note:\u003c\/strong\u003e this kit requires the Nitron Damper Control Unit (DCU) to operate.\u003c\/p\u003e","brand":"Nitron","offers":[{"title":"Default Title","offer_id":58532172300669,"sku":"NTCNI011ER3","price":7584.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/5767\/7352\/files\/NTCNI011ER3-02.jpg?v=1786634128"},{"product_id":"nitron-elec-tron-r3-coilovers-ford-mustang-s550-gt350-gt500-15-23","title":"Nitron elec-TRON R3 Coilovers Ford Mustang S550 GT350 GT500 15-23","description":"\u003ch2\u003eNitron elec-TRON R3 Coilovers\u003c\/h2\u003e \u003cem\u003ePlease note: This kit uses the’s DNA electronic control system, so no additional products are required.\u003c\/em\u003e \u003cp\u003eThe elec-TRON R3 coilover kit combines the Nitron proportional solenoid valve with independent manual compression control. Designed for enthusiasts or professionals looking to further optimise their vehicle’s suspension performance for more extreme driving conditions and a higher level of performance. Piggyback or remotely mounted reservoirs allow quick and simple independent adjustment of high-speed and low-speed compression damping.\u003c\/p\u003e \u003cul\u003e \u003cli\u003e16 high-speed and 26 low-speed clicks, setting the baseline for the semi active system\u003c\/li\u003e \u003cli\u003eAdjustable top mounts and race springs\u003c\/li\u003e \u003cli\u003eRemote reservoirs for quick and simple compression adjustment\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e\u003cstrong\u003eTake the Next Step in Suspension Innovation\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eThe Nitron \u003cem\u003eelec-TRON\u003c\/em\u003e range is a fusion of world-renowned Nitron quality and attention to detail, combined with cutting-edge electronic valve technology. At the heart of the system is Nitron’s proportional solenoid valve, delivering unparalleled precision and control over the damping system. Each shock absorber in the \u003cem\u003eelec-TRON\u003c\/em\u003e system is equipped with an independent valve, allowing for individual damping control at each wheel. This is essential for optimising handling, stability and ride comfort.\u003c\/p\u003e \u003cp\u003eThe \u003cem\u003eelec-TRON\u003c\/em\u003e proportional valve operates within a range of 300-1800mA, providing a broad adjustment capability and a rapid response time of just 6 to 8 milliseconds from full hard to full soft. This system governs both compression and rebound damping. The valve is piston rod-mounted, fine-tuning the bleed characteristics of the shim stack, and is integrated with Nitron’s gas-pressurized mono-tube construction, ensuring maximum performance and reliability. This valve is compatible with both the R1 (electronic adjustment only) and the R3 (manual high and low-speed compression adjustment).\u003c\/p\u003e \u003cp\u003eIn the R3, the manual settings establish a baseline for the adjustments made by the main \u003cem\u003eelec-TRON\u003c\/em\u003e valve. The system can precisely adjust damping force based on a variety of factors such as g-load conditions, vehicle speed, road surface, and driver input. This results in highly accurate and responsive damping, significantly enhancing the overall performance of the vehicle.\u003c\/p\u003e \u003cp\u003eNote: Image used for illustration purposes only. Specific details, finishes and end fittings may differ from that shown.\u003cbr\u003e\u003c\/p\u003e \u003cp\u003eAll Nitron shocks are hand made to order to each individual customer's requirements. Lead times are normally 2 - 3 weeks, but at certain times may be slightly longer. If you would like a more accurate delivery time please contact us.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003ePlease note:\u003c\/strong\u003e this kit requires the Nitron Damper Control Unit (DCU) to operate.\u003c\/p\u003e","brand":"Nitron","offers":[{"title":"Road","offer_id":58532172333437,"sku":"NTCFO021ER3FRS","price":8478.0,"currency_code":"GBP","in_stock":true},{"title":"Track","offer_id":58532172366205,"sku":"NTCFO021ER3TDS","price":8478.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/5767\/7352\/files\/NitronR3-1_2df51b4e-622d-40bb-8d84-e8a673ad8ea0.jpg?v=1786634132"},{"product_id":"nitron-elec-tron-r3-coilovers-bmw-m2-f87-15-21-with-standalone-fal","title":"Nitron elec-TRON R3 Coilovers BMW M2 F87 15-21 With Standalone FAL","description":"\u003ch2\u003eNitron elec-TRON R3 Coilovers\u003c\/h2\u003e \u003cem\u003ePlease note: This kit uses the’s DNA electronic control system, so no additional products are required.\u003c\/em\u003e \u003cp\u003eThe elec-TRON R3 coilover kit combines the Nitron proportional solenoid valve with independent manual compression control. Designed for enthusiasts or professionals looking to further optimise their vehicle’s suspension performance for more extreme driving conditions and a higher level of performance. Piggyback or remotely mounted reservoirs allow quick and simple independent adjustment of high-speed and low-speed compression damping.\u003c\/p\u003e \u003cul\u003e \u003cli\u003e16 high-speed and 26 low-speed clicks, setting the baseline for the semi active system\u003c\/li\u003e \u003cli\u003eAdjustable top mounts and race springs\u003c\/li\u003e \u003cli\u003eRemote reservoirs for quick and simple compression adjustment\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e\u003cstrong\u003eTake the Next Step in Suspension Innovation\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eThe Nitron \u003cem\u003eelec-TRON\u003c\/em\u003e range is a fusion of world-renowned Nitron quality and attention to detail, combined with cutting-edge electronic valve technology. At the heart of the system is Nitron’s proportional solenoid valve, delivering unparalleled precision and control over the damping system. Each shock absorber in the \u003cem\u003eelec-TRON\u003c\/em\u003e system is equipped with an independent valve, allowing for individual damping control at each wheel. This is essential for optimising handling, stability and ride comfort.\u003c\/p\u003e \u003cp\u003eThe \u003cem\u003eelec-TRON\u003c\/em\u003e proportional valve operates within a range of 300-1800mA, providing a broad adjustment capability and a rapid response time of just 6 to 8 milliseconds from full hard to full soft. This system governs both compression and rebound damping. The valve is piston rod-mounted, fine-tuning the bleed characteristics of the shim stack, and is integrated with Nitron’s gas-pressurized mono-tube construction, ensuring maximum performance and reliability. This valve is compatible with both the R1 (electronic adjustment only) and the R3 (manual high and low-speed compression adjustment).\u003c\/p\u003e \u003cp\u003eIn the R3, the manual settings establish a baseline for the adjustments made by the main \u003cem\u003eelec-TRON\u003c\/em\u003e valve. The system can precisely adjust damping force based on a variety of factors such as g-load conditions, vehicle speed, road surface, and driver input. This results in highly accurate and responsive damping, significantly enhancing the overall performance of the vehicle.\u003c\/p\u003e \u003cp\u003eNote: Image used for illustration purposes only. Specific details, finishes and end fittings may differ from that shown.\u003cbr\u003e\u003c\/p\u003e \u003cp\u003eAll Nitron shocks are hand made to order to each individual customer's requirements. Lead times are normally 2 - 3 weeks, but at certain times may be slightly longer. If you would like a more accurate delivery time please contact us.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003ePlease note:\u003c\/strong\u003e this kit requires the Nitron Damper Control Unit (DCU) to operate.\u003c\/p\u003e\u003ch3\u003eFront Axle Lift (FAL)\u003c\/h3\u003e\u003cp\u003eThis kit is supplied with the Nitron standalone Front Axle Lift system, letting you raise the front axle to clear speed bumps, ramps and steep driveways without affecting damping performance.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKey features:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eKit contains all components – lift cylinders, hydraulic lines, pump, mounting bracket, wiring loom and controller\u003c\/li\u003e\n\u003cli\u003e250W pump, typical lift time under 3 seconds\u003c\/li\u003e\n\u003cli\u003eAudible in-cabin warning system and switch with built-in warning light\u003c\/li\u003e\n\u003cli\u003eAuto-off function\u003c\/li\u003e\n\u003cli\u003eLift height varies by application – see the specification table below\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Nitron","offers":[{"title":"Road","offer_id":58532172464509,"sku":"NTCBM023ER3FRS+FAL","price":10848.0,"currency_code":"GBP","in_stock":true},{"title":"Track","offer_id":58532172497277,"sku":"NTCBM023ER3TDS+FAL","price":10848.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/5767\/7352\/files\/NTCBM023ER3-FAL-02.jpg?v=1786634131"},{"product_id":"nitron-elec-tron-r3-coilovers-nissan-skyline-r34-gt-r-99-02","title":"Nitron elec-TRON R3 Coilovers Nissan Skyline R34 GT-R 99-02","description":"\u003ch2\u003eNitron elec-TRON R3 Coilovers\u003c\/h2\u003e \u003cem\u003ePlease note: This kit uses the’s DNA electronic control system, so no additional products are required.\u003c\/em\u003e \u003cp\u003eThe elec-TRON R3 coilover kit combines the Nitron proportional solenoid valve with independent manual compression control. Designed for enthusiasts or professionals looking to further optimise their vehicle’s suspension performance for more extreme driving conditions and a higher level of performance. Piggyback or remotely mounted reservoirs allow quick and simple independent adjustment of high-speed and low-speed compression damping.\u003c\/p\u003e \u003cul\u003e \u003cli\u003e16 high-speed and 26 low-speed clicks, setting the baseline for the semi active system\u003c\/li\u003e \u003cli\u003eAdjustable top mounts and race springs\u003c\/li\u003e \u003cli\u003eRemote reservoirs for quick and simple compression adjustment\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e\u003cstrong\u003eTake the Next Step in Suspension Innovation\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eThe Nitron \u003cem\u003eelec-TRON\u003c\/em\u003e range is a fusion of world-renowned Nitron quality and attention to detail, combined with cutting-edge electronic valve technology. At the heart of the system is Nitron’s proportional solenoid valve, delivering unparalleled precision and control over the damping system. Each shock absorber in the \u003cem\u003eelec-TRON\u003c\/em\u003e system is equipped with an independent valve, allowing for individual damping control at each wheel. This is essential for optimising handling, stability and ride comfort.\u003c\/p\u003e \u003cp\u003eThe \u003cem\u003eelec-TRON\u003c\/em\u003e proportional valve operates within a range of 300-1800mA, providing a broad adjustment capability and a rapid response time of just 6 to 8 milliseconds from full hard to full soft. This system governs both compression and rebound damping. The valve is piston rod-mounted, fine-tuning the bleed characteristics of the shim stack, and is integrated with Nitron’s gas-pressurized mono-tube construction, ensuring maximum performance and reliability. This valve is compatible with both the R1 (electronic adjustment only) and the R3 (manual high and low-speed compression adjustment).\u003c\/p\u003e \u003cp\u003eIn the R3, the manual settings establish a baseline for the adjustments made by the main \u003cem\u003eelec-TRON\u003c\/em\u003e valve. The system can precisely adjust damping force based on a variety of factors such as g-load conditions, vehicle speed, road surface, and driver input. This results in highly accurate and responsive damping, significantly enhancing the overall performance of the vehicle.\u003c\/p\u003e \u003cp\u003eNote: Image used for illustration purposes only. Specific details, finishes and end fittings may differ from that shown.\u003cbr\u003e\u003c\/p\u003e \u003cp\u003eAll Nitron shocks are hand made to order to each individual customer's requirements. Lead times are normally 2 - 3 weeks, but at certain times may be slightly longer. If you would like a more accurate delivery time please contact us.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003ePlease note:\u003c\/strong\u003e this kit requires the Nitron Damper Control Unit (DCU) to operate.\u003c\/p\u003e","brand":"Nitron","offers":[{"title":"Default Title","offer_id":58532172431741,"sku":"NTCNI012ER3","price":7584.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/5767\/7352\/files\/NitronR3-1_21eaa84b-45d6-4607-87bc-e859eb40e70b.jpg?v=1786634127"},{"product_id":"nitron-elec-tron-r3-coilovers-porsche-911-carrera-4-991-11-20","title":"Nitron elec-TRON R3 Coilovers Porsche 911 Carrera 4 991 11-20","description":"\u003ch2\u003eNitron elec-TRON R3 Coilovers\u003c\/h2\u003e \u003cem\u003ePlease note: This kit uses the’s DNA electronic control system, so no additional products are required.\u003c\/em\u003e \u003cp\u003eThe elec-TRON R3 coilover kit combines the Nitron proportional solenoid valve with independent manual compression control. Designed for enthusiasts or professionals looking to further optimise their vehicle’s suspension performance for more extreme driving conditions and a higher level of performance. Piggyback or remotely mounted reservoirs allow quick and simple independent adjustment of high-speed and low-speed compression damping.\u003c\/p\u003e \u003cul\u003e \u003cli\u003e16 high-speed and 26 low-speed clicks, setting the baseline for the semi active system\u003c\/li\u003e \u003cli\u003eAdjustable top mounts and race springs\u003c\/li\u003e \u003cli\u003eRemote reservoirs for quick and simple compression adjustment\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e\u003cstrong\u003eTake the Next Step in Suspension Innovation\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eThe Nitron \u003cem\u003eelec-TRON\u003c\/em\u003e range is a fusion of world-renowned Nitron quality and attention to detail, combined with cutting-edge electronic valve technology. At the heart of the system is Nitron’s proportional solenoid valve, delivering unparalleled precision and control over the damping system. Each shock absorber in the \u003cem\u003eelec-TRON\u003c\/em\u003e system is equipped with an independent valve, allowing for individual damping control at each wheel. This is essential for optimising handling, stability and ride comfort.\u003c\/p\u003e \u003cp\u003eThe \u003cem\u003eelec-TRON\u003c\/em\u003e proportional valve operates within a range of 300-1800mA, providing a broad adjustment capability and a rapid response time of just 6 to 8 milliseconds from full hard to full soft. This system governs both compression and rebound damping. The valve is piston rod-mounted, fine-tuning the bleed characteristics of the shim stack, and is integrated with Nitron’s gas-pressurized mono-tube construction, ensuring maximum performance and reliability. This valve is compatible with both the R1 (electronic adjustment only) and the R3 (manual high and low-speed compression adjustment).\u003c\/p\u003e \u003cp\u003eIn the R3, the manual settings establish a baseline for the adjustments made by the main \u003cem\u003eelec-TRON\u003c\/em\u003e valve. The system can precisely adjust damping force based on a variety of factors such as g-load conditions, vehicle speed, road surface, and driver input. This results in highly accurate and responsive damping, significantly enhancing the overall performance of the vehicle.\u003c\/p\u003e \u003cp\u003eNote: Image used for illustration purposes only. Specific details, finishes and end fittings may differ from that shown.\u003cbr\u003e\u003c\/p\u003e \u003cp\u003eAll Nitron shocks are hand made to order to each individual customer's requirements. Lead times are normally 2 - 3 weeks, but at certain times may be slightly longer. If you would like a more accurate delivery time please contact us.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003ePlease note:\u003c\/strong\u003e this kit requires the Nitron Damper Control Unit (DCU) to operate.\u003c\/p\u003e","brand":"Nitron","offers":[{"title":"Default Title","offer_id":58532172530045,"sku":"NTCPO025ER3","price":7890.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/5767\/7352\/files\/NitronR3-1_1e2c769b-b902-4ac3-9b33-413a34655b41.jpg?v=1786634129"},{"product_id":"nitron-elec-tron-r3-coilovers-audi-r8-42-06-15","title":"Nitron elec-TRON R3 Coilovers Audi R8 42 06-15","description":"\u003ch2\u003eNitron elec-TRON R3 Coilovers\u003c\/h2\u003e \u003cem\u003ePlease note: This kit uses the’s DNA electronic control system, so no additional products are required.\u003c\/em\u003e \u003cp\u003eThe elec-TRON R3 coilover kit combines the Nitron proportional solenoid valve with independent manual compression control. Designed for enthusiasts or professionals looking to further optimise their vehicle’s suspension performance for more extreme driving conditions and a higher level of performance. Piggyback or remotely mounted reservoirs allow quick and simple independent adjustment of high-speed and low-speed compression damping.\u003c\/p\u003e \u003cul\u003e \u003cli\u003e16 high-speed and 26 low-speed clicks, setting the baseline for the semi active system\u003c\/li\u003e \u003cli\u003eAdjustable top mounts and race springs\u003c\/li\u003e \u003cli\u003eRemote reservoirs for quick and simple compression adjustment\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e\u003cstrong\u003eTake the Next Step in Suspension Innovation\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eThe Nitron \u003cem\u003eelec-TRON\u003c\/em\u003e range is a fusion of world-renowned Nitron quality and attention to detail, combined with cutting-edge electronic valve technology. At the heart of the system is Nitron’s proportional solenoid valve, delivering unparalleled precision and control over the damping system. Each shock absorber in the \u003cem\u003eelec-TRON\u003c\/em\u003e system is equipped with an independent valve, allowing for individual damping control at each wheel. This is essential for optimising handling, stability and ride comfort.\u003c\/p\u003e \u003cp\u003eThe \u003cem\u003eelec-TRON\u003c\/em\u003e proportional valve operates within a range of 300-1800mA, providing a broad adjustment capability and a rapid response time of just 6 to 8 milliseconds from full hard to full soft. This system governs both compression and rebound damping. The valve is piston rod-mounted, fine-tuning the bleed characteristics of the shim stack, and is integrated with Nitron’s gas-pressurized mono-tube construction, ensuring maximum performance and reliability. This valve is compatible with both the R1 (electronic adjustment only) and the R3 (manual high and low-speed compression adjustment).\u003c\/p\u003e \u003cp\u003eIn the R3, the manual settings establish a baseline for the adjustments made by the main \u003cem\u003eelec-TRON\u003c\/em\u003e valve. The system can precisely adjust damping force based on a variety of factors such as g-load conditions, vehicle speed, road surface, and driver input. This results in highly accurate and responsive damping, significantly enhancing the overall performance of the vehicle.\u003c\/p\u003e \u003cp\u003eNote: Image used for illustration purposes only. Specific details, finishes and end fittings may differ from that shown.\u003cbr\u003e\u003c\/p\u003e \u003cp\u003eAll Nitron shocks are hand made to order to each individual customer's requirements. Lead times are normally 2 - 3 weeks, but at certain times may be slightly longer. If you would like a more accurate delivery time please contact us.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003ePlease note:\u003c\/strong\u003e this kit requires the Nitron Damper Control Unit (DCU) to operate.\u003c\/p\u003e","brand":"Nitron","offers":[{"title":"Road","offer_id":58532172628349,"sku":"NTCAU010ER3FRS","price":6306.0,"currency_code":"GBP","in_stock":true},{"title":"Track","offer_id":58532172661117,"sku":"NTCAU010ER3TDS","price":6306.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/5767\/7352\/files\/NitronR3-1_cdc6e24d-8c97-46d8-88ad-a2201c4b547e.jpg?v=1786634133"},{"product_id":"nitron-elec-tron-r3-coilovers-porsche-911-carrera-4-996-97-04","title":"Nitron elec-TRON R3 Coilovers Porsche 911 Carrera 4 996 97-04","description":"\u003ch2\u003eNitron elec-TRON R3 Coilovers\u003c\/h2\u003e \u003cem\u003ePlease note: This kit uses the’s DNA electronic control system, so no additional products are required.\u003c\/em\u003e \u003cp\u003eThe elec-TRON R3 coilover kit combines the Nitron proportional solenoid valve with independent manual compression control. Designed for enthusiasts or professionals looking to further optimise their vehicle’s suspension performance for more extreme driving conditions and a higher level of performance. Piggyback or remotely mounted reservoirs allow quick and simple independent adjustment of high-speed and low-speed compression damping.\u003c\/p\u003e \u003cul\u003e \u003cli\u003e16 high-speed and 26 low-speed clicks, setting the baseline for the semi active system\u003c\/li\u003e \u003cli\u003eAdjustable top mounts and race springs\u003c\/li\u003e \u003cli\u003eRemote reservoirs for quick and simple compression adjustment\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e\u003cstrong\u003eTake the Next Step in Suspension Innovation\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eThe Nitron \u003cem\u003eelec-TRON\u003c\/em\u003e range is a fusion of world-renowned Nitron quality and attention to detail, combined with cutting-edge electronic valve technology. At the heart of the system is Nitron’s proportional solenoid valve, delivering unparalleled precision and control over the damping system. Each shock absorber in the \u003cem\u003eelec-TRON\u003c\/em\u003e system is equipped with an independent valve, allowing for individual damping control at each wheel. This is essential for optimising handling, stability and ride comfort.\u003c\/p\u003e \u003cp\u003eThe \u003cem\u003eelec-TRON\u003c\/em\u003e proportional valve operates within a range of 300-1800mA, providing a broad adjustment capability and a rapid response time of just 6 to 8 milliseconds from full hard to full soft. This system governs both compression and rebound damping. The valve is piston rod-mounted, fine-tuning the bleed characteristics of the shim stack, and is integrated with Nitron’s gas-pressurized mono-tube construction, ensuring maximum performance and reliability. This valve is compatible with both the R1 (electronic adjustment only) and the R3 (manual high and low-speed compression adjustment).\u003c\/p\u003e \u003cp\u003eIn the R3, the manual settings establish a baseline for the adjustments made by the main \u003cem\u003eelec-TRON\u003c\/em\u003e valve. The system can precisely adjust damping force based on a variety of factors such as g-load conditions, vehicle speed, road surface, and driver input. This results in highly accurate and responsive damping, significantly enhancing the overall performance of the vehicle.\u003c\/p\u003e \u003cp\u003eNote: Image used for illustration purposes only. Specific details, finishes and end fittings may differ from that shown.\u003cbr\u003e\u003c\/p\u003e \u003cp\u003eAll Nitron shocks are hand made to order to each individual customer's requirements. Lead times are normally 2 - 3 weeks, but at certain times may be slightly longer. If you would like a more accurate delivery time please contact us.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003ePlease note:\u003c\/strong\u003e this kit requires the Nitron Damper Control Unit (DCU) to operate.\u003c\/p\u003e","brand":"Nitron","offers":[{"title":"Default Title","offer_id":58532172562813,"sku":"NTCPO027ER3","price":8694.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/5767\/7352\/files\/NitronR3-1.jpg?v=1786634126"},{"product_id":"nitron-elec-tron-r3-coilovers-porsche-911-carrera-4-997-04-13-with-standalone-fal","title":"Nitron elec-TRON R3 Coilovers Porsche 911 Carrera 4 997 04-13 With Standalone FAL","description":"\u003ch2\u003eNitron elec-TRON R3 Coilovers\u003c\/h2\u003e \u003cem\u003ePlease note: This kit uses the’s DNA electronic control system, so no additional products are required.\u003c\/em\u003e \u003cp\u003eThe elec-TRON R3 coilover kit combines the Nitron proportional solenoid valve with independent manual compression control. Designed for enthusiasts or professionals looking to further optimise their vehicle’s suspension performance for more extreme driving conditions and a higher level of performance. Piggyback or remotely mounted reservoirs allow quick and simple independent adjustment of high-speed and low-speed compression damping.\u003c\/p\u003e \u003cul\u003e \u003cli\u003e16 high-speed and 26 low-speed clicks, setting the baseline for the semi active system\u003c\/li\u003e \u003cli\u003eAdjustable top mounts and race springs\u003c\/li\u003e \u003cli\u003eRemote reservoirs for quick and simple compression adjustment\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e\u003cstrong\u003eTake the Next Step in Suspension Innovation\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eThe Nitron \u003cem\u003eelec-TRON\u003c\/em\u003e range is a fusion of world-renowned Nitron quality and attention to detail, combined with cutting-edge electronic valve technology. At the heart of the system is Nitron’s proportional solenoid valve, delivering unparalleled precision and control over the damping system. Each shock absorber in the \u003cem\u003eelec-TRON\u003c\/em\u003e system is equipped with an independent valve, allowing for individual damping control at each wheel. This is essential for optimising handling, stability and ride comfort.\u003c\/p\u003e \u003cp\u003eThe \u003cem\u003eelec-TRON\u003c\/em\u003e proportional valve operates within a range of 300-1800mA, providing a broad adjustment capability and a rapid response time of just 6 to 8 milliseconds from full hard to full soft. This system governs both compression and rebound damping. The valve is piston rod-mounted, fine-tuning the bleed characteristics of the shim stack, and is integrated with Nitron’s gas-pressurized mono-tube construction, ensuring maximum performance and reliability. This valve is compatible with both the R1 (electronic adjustment only) and the R3 (manual high and low-speed compression adjustment).\u003c\/p\u003e \u003cp\u003eIn the R3, the manual settings establish a baseline for the adjustments made by the main \u003cem\u003eelec-TRON\u003c\/em\u003e valve. The system can precisely adjust damping force based on a variety of factors such as g-load conditions, vehicle speed, road surface, and driver input. This results in highly accurate and responsive damping, significantly enhancing the overall performance of the vehicle.\u003c\/p\u003e \u003cp\u003eNote: Image used for illustration purposes only. Specific details, finishes and end fittings may differ from that shown.\u003cbr\u003e\u003c\/p\u003e \u003cp\u003eAll Nitron shocks are hand made to order to each individual customer's requirements. Lead times are normally 2 - 3 weeks, but at certain times may be slightly longer. If you would like a more accurate delivery time please contact us.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003ePlease note:\u003c\/strong\u003e this kit requires the Nitron Damper Control Unit (DCU) to operate.\u003c\/p\u003e\u003ch3\u003eFront Axle Lift (FAL)\u003c\/h3\u003e\u003cp\u003eThis kit is supplied with the Nitron standalone Front Axle Lift system, letting you raise the front axle to clear speed bumps, ramps and steep driveways without affecting damping performance.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKey features:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eKit contains all components – lift cylinders, hydraulic lines, pump, mounting bracket, wiring loom and controller\u003c\/li\u003e\n\u003cli\u003e250W pump, typical lift time under 3 seconds\u003c\/li\u003e\n\u003cli\u003eAudible in-cabin warning system and switch with built-in warning light\u003c\/li\u003e\n\u003cli\u003eAuto-off function\u003c\/li\u003e\n\u003cli\u003eLift height varies by application – see the specification table below\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Nitron","offers":[{"title":"Default Title","offer_id":58532172595581,"sku":"NTCPO026ER3+FAL","price":11262.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/5767\/7352\/files\/NTCPO026ER3-FAL-01.jpg?v=1786634129"},{"product_id":"nitron-elec-tron-r3-coilovers-porsche-911-carrera-996-97-05","title":"Nitron elec-TRON R3 Coilovers Porsche 911 Carrera 996 97-05","description":"\u003ch2\u003eNitron elec-TRON R3 Coilovers\u003c\/h2\u003e \u003cem\u003ePlease note: This kit uses the’s DNA electronic control system, so no additional products are required.\u003c\/em\u003e \u003cp\u003eThe elec-TRON R3 coilover kit combines the Nitron proportional solenoid valve with independent manual compression control. Designed for enthusiasts or professionals looking to further optimise their vehicle’s suspension performance for more extreme driving conditions and a higher level of performance. Piggyback or remotely mounted reservoirs allow quick and simple independent adjustment of high-speed and low-speed compression damping.\u003c\/p\u003e \u003cul\u003e \u003cli\u003e16 high-speed and 26 low-speed clicks, setting the baseline for the semi active system\u003c\/li\u003e \u003cli\u003eAdjustable top mounts and race springs\u003c\/li\u003e \u003cli\u003eRemote reservoirs for quick and simple compression adjustment\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e\u003cstrong\u003eTake the Next Step in Suspension Innovation\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eThe Nitron \u003cem\u003eelec-TRON\u003c\/em\u003e range is a fusion of world-renowned Nitron quality and attention to detail, combined with cutting-edge electronic valve technology. At the heart of the system is Nitron’s proportional solenoid valve, delivering unparalleled precision and control over the damping system. Each shock absorber in the \u003cem\u003eelec-TRON\u003c\/em\u003e system is equipped with an independent valve, allowing for individual damping control at each wheel. This is essential for optimising handling, stability and ride comfort.\u003c\/p\u003e \u003cp\u003eThe \u003cem\u003eelec-TRON\u003c\/em\u003e proportional valve operates within a range of 300-1800mA, providing a broad adjustment capability and a rapid response time of just 6 to 8 milliseconds from full hard to full soft. This system governs both compression and rebound damping. The valve is piston rod-mounted, fine-tuning the bleed characteristics of the shim stack, and is integrated with Nitron’s gas-pressurized mono-tube construction, ensuring maximum performance and reliability. This valve is compatible with both the R1 (electronic adjustment only) and the R3 (manual high and low-speed compression adjustment).\u003c\/p\u003e \u003cp\u003eIn the R3, the manual settings establish a baseline for the adjustments made by the main \u003cem\u003eelec-TRON\u003c\/em\u003e valve. The system can precisely adjust damping force based on a variety of factors such as g-load conditions, vehicle speed, road surface, and driver input. This results in highly accurate and responsive damping, significantly enhancing the overall performance of the vehicle.\u003c\/p\u003e \u003cp\u003eNote: Image used for illustration purposes only. Specific details, finishes and end fittings may differ from that shown.\u003cbr\u003e\u003c\/p\u003e \u003cp\u003eAll Nitron shocks are hand made to order to each individual customer's requirements. Lead times are normally 2 - 3 weeks, but at certain times may be slightly longer. If you would like a more accurate delivery time please contact us.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003ePlease note:\u003c\/strong\u003e this kit requires the Nitron Damper Control Unit (DCU) to operate.\u003c\/p\u003e","brand":"Nitron","offers":[{"title":"Default Title","offer_id":58532172693885,"sku":"NTCPO021ER3-911996CARRERA","price":7986.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/5767\/7352\/files\/NitronR3-1_fb8e77da-db70-46d7-8041-5ec31cdeaad1.jpg?v=1786634127"},{"product_id":"nitron-elec-tron-r3-coilovers-chevrolet-corvette-c8-20","title":"Nitron elec-TRON R3 Coilovers Chevrolet Corvette C8 20+","description":"\u003ch2\u003eNitron elec-TRON R3 Coilovers\u003c\/h2\u003e \u003cem\u003ePlease note: This kit uses the’s DNA electronic control system, so no additional products are required.\u003c\/em\u003e \u003cp\u003eThe elec-TRON R3 coilover kit combines the Nitron proportional solenoid valve with independent manual compression control. Designed for enthusiasts or professionals looking to further optimise their vehicle’s suspension performance for more extreme driving conditions and a higher level of performance. Piggyback or remotely mounted reservoirs allow quick and simple independent adjustment of high-speed and low-speed compression damping.\u003c\/p\u003e \u003cul\u003e \u003cli\u003e16 high-speed and 26 low-speed clicks, setting the baseline for the semi active system\u003c\/li\u003e \u003cli\u003eAdjustable top mounts and race springs\u003c\/li\u003e \u003cli\u003eRemote reservoirs for quick and simple compression adjustment\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e\u003cstrong\u003eTake the Next Step in Suspension Innovation\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eThe Nitron \u003cem\u003eelec-TRON\u003c\/em\u003e range is a fusion of world-renowned Nitron quality and attention to detail, combined with cutting-edge electronic valve technology. At the heart of the system is Nitron’s proportional solenoid valve, delivering unparalleled precision and control over the damping system. Each shock absorber in the \u003cem\u003eelec-TRON\u003c\/em\u003e system is equipped with an independent valve, allowing for individual damping control at each wheel. This is essential for optimising handling, stability and ride comfort.\u003c\/p\u003e \u003cp\u003eThe \u003cem\u003eelec-TRON\u003c\/em\u003e proportional valve operates within a range of 300-1800mA, providing a broad adjustment capability and a rapid response time of just 6 to 8 milliseconds from full hard to full soft. This system governs both compression and rebound damping. The valve is piston rod-mounted, fine-tuning the bleed characteristics of the shim stack, and is integrated with Nitron’s gas-pressurized mono-tube construction, ensuring maximum performance and reliability. This valve is compatible with both the R1 (electronic adjustment only) and the R3 (manual high and low-speed compression adjustment).\u003c\/p\u003e \u003cp\u003eIn the R3, the manual settings establish a baseline for the adjustments made by the main \u003cem\u003eelec-TRON\u003c\/em\u003e valve. The system can precisely adjust damping force based on a variety of factors such as g-load conditions, vehicle speed, road surface, and driver input. This results in highly accurate and responsive damping, significantly enhancing the overall performance of the vehicle.\u003c\/p\u003e \u003cp\u003eNote: Image used for illustration purposes only. Specific details, finishes and end fittings may differ from that shown.\u003cbr\u003e\u003c\/p\u003e \u003cp\u003eAll Nitron shocks are hand made to order to each individual customer's requirements. Lead times are normally 2 - 3 weeks, but at certain times may be slightly longer. If you would like a more accurate delivery time please contact us.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003ePlease note:\u003c\/strong\u003e this kit requires the Nitron Damper Control Unit (DCU) to operate.\u003c\/p\u003e","brand":"Nitron","offers":[{"title":"Road","offer_id":58532172726653,"sku":"NTCCH014ER3FRS","price":9498.0,"currency_code":"GBP","in_stock":true},{"title":"Track","offer_id":58532172759421,"sku":"NTCCH014ER3TDS","price":9498.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/5767\/7352\/files\/NitronR3-1_19f6a9a2-3d01-4ab3-b6f3-b508809aace4.jpg?v=1786634132"},{"product_id":"nitron-elec-tron-r3-coilovers-chevrolet-corvette-c8-20-with-oem-fal-integration","title":"Nitron elec-TRON R3 Coilovers Chevrolet Corvette C8 20+ With OEM FAL Integration","description":"\u003ch2\u003eNitron elec-TRON R3 Coilovers\u003c\/h2\u003e \u003cem\u003ePlease note: This kit uses the’s DNA electronic control system, so no additional products are required.\u003c\/em\u003e \u003cp\u003eThe elec-TRON R3 coilover kit combines the Nitron proportional solenoid valve with independent manual compression control. Designed for enthusiasts or professionals looking to further optimise their vehicle’s suspension performance for more extreme driving conditions and a higher level of performance. Piggyback or remotely mounted reservoirs allow quick and simple independent adjustment of high-speed and low-speed compression damping.\u003c\/p\u003e \u003cul\u003e \u003cli\u003e16 high-speed and 26 low-speed clicks, setting the baseline for the semi active system\u003c\/li\u003e \u003cli\u003eAdjustable top mounts and race springs\u003c\/li\u003e \u003cli\u003eRemote reservoirs for quick and simple compression adjustment\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e\u003cstrong\u003eTake the Next Step in Suspension Innovation\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eThe Nitron \u003cem\u003eelec-TRON\u003c\/em\u003e range is a fusion of world-renowned Nitron quality and attention to detail, combined with cutting-edge electronic valve technology. At the heart of the system is Nitron’s proportional solenoid valve, delivering unparalleled precision and control over the damping system. Each shock absorber in the \u003cem\u003eelec-TRON\u003c\/em\u003e system is equipped with an independent valve, allowing for individual damping control at each wheel. This is essential for optimising handling, stability and ride comfort.\u003c\/p\u003e \u003cp\u003eThe \u003cem\u003eelec-TRON\u003c\/em\u003e proportional valve operates within a range of 300-1800mA, providing a broad adjustment capability and a rapid response time of just 6 to 8 milliseconds from full hard to full soft. This system governs both compression and rebound damping. The valve is piston rod-mounted, fine-tuning the bleed characteristics of the shim stack, and is integrated with Nitron’s gas-pressurized mono-tube construction, ensuring maximum performance and reliability. This valve is compatible with both the R1 (electronic adjustment only) and the R3 (manual high and low-speed compression adjustment).\u003c\/p\u003e \u003cp\u003eIn the R3, the manual settings establish a baseline for the adjustments made by the main \u003cem\u003eelec-TRON\u003c\/em\u003e valve. The system can precisely adjust damping force based on a variety of factors such as g-load conditions, vehicle speed, road surface, and driver input. This results in highly accurate and responsive damping, significantly enhancing the overall performance of the vehicle.\u003c\/p\u003e \u003cp\u003eNote: Image used for illustration purposes only. Specific details, finishes and end fittings may differ from that shown.\u003cbr\u003e\u003c\/p\u003e \u003cp\u003eAll Nitron shocks are hand made to order to each individual customer's requirements. Lead times are normally 2 - 3 weeks, but at certain times may be slightly longer. If you would like a more accurate delivery time please contact us.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003ePlease note:\u003c\/strong\u003e this kit requires the Nitron Damper Control Unit (DCU) to operate.\u003c\/p\u003e\u003ch3\u003eOEM Front Axle Lift Integration\u003c\/h3\u003e\u003cp\u003eThis kit is engineered to work with your vehicle’s factory front axle lift system, retaining full OEM lift functionality with no compromise to suspension geometry, travel or reliability. No Nitron FAL components are supplied.\u003c\/p\u003e","brand":"Nitron","offers":[{"title":"Default Title","offer_id":58532172824957,"sku":"NTCCH015ER3+OEI","price":9498.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/5767\/7352\/files\/NitronR3wOEMFal-1.jpg?v=1786634126"},{"product_id":"nitron-elec-tron-r3-coilovers-nissan-skyline-r33-gt-r-95-98-with-standalone-fal","title":"Nitron elec-TRON R3 Coilovers Nissan Skyline R33 GT-R 95-98 With Standalone FAL","description":"\u003ch2\u003eNitron elec-TRON R3 Coilovers\u003c\/h2\u003e \u003cem\u003ePlease note: This kit uses the’s DNA electronic control system, so no additional products are required.\u003c\/em\u003e \u003cp\u003eThe elec-TRON R3 coilover kit combines the Nitron proportional solenoid valve with independent manual compression control. Designed for enthusiasts or professionals looking to further optimise their vehicle’s suspension performance for more extreme driving conditions and a higher level of performance. Piggyback or remotely mounted reservoirs allow quick and simple independent adjustment of high-speed and low-speed compression damping.\u003c\/p\u003e \u003cul\u003e \u003cli\u003e16 high-speed and 26 low-speed clicks, setting the baseline for the semi active system\u003c\/li\u003e \u003cli\u003eAdjustable top mounts and race springs\u003c\/li\u003e \u003cli\u003eRemote reservoirs for quick and simple compression adjustment\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e\u003cstrong\u003eTake the Next Step in Suspension Innovation\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eThe Nitron \u003cem\u003eelec-TRON\u003c\/em\u003e range is a fusion of world-renowned Nitron quality and attention to detail, combined with cutting-edge electronic valve technology. At the heart of the system is Nitron’s proportional solenoid valve, delivering unparalleled precision and control over the damping system. Each shock absorber in the \u003cem\u003eelec-TRON\u003c\/em\u003e system is equipped with an independent valve, allowing for individual damping control at each wheel. This is essential for optimising handling, stability and ride comfort.\u003c\/p\u003e \u003cp\u003eThe \u003cem\u003eelec-TRON\u003c\/em\u003e proportional valve operates within a range of 300-1800mA, providing a broad adjustment capability and a rapid response time of just 6 to 8 milliseconds from full hard to full soft. This system governs both compression and rebound damping. The valve is piston rod-mounted, fine-tuning the bleed characteristics of the shim stack, and is integrated with Nitron’s gas-pressurized mono-tube construction, ensuring maximum performance and reliability. This valve is compatible with both the R1 (electronic adjustment only) and the R3 (manual high and low-speed compression adjustment).\u003c\/p\u003e \u003cp\u003eIn the R3, the manual settings establish a baseline for the adjustments made by the main \u003cem\u003eelec-TRON\u003c\/em\u003e valve. The system can precisely adjust damping force based on a variety of factors such as g-load conditions, vehicle speed, road surface, and driver input. This results in highly accurate and responsive damping, significantly enhancing the overall performance of the vehicle.\u003c\/p\u003e \u003cp\u003eNote: Image used for illustration purposes only. Specific details, finishes and end fittings may differ from that shown.\u003cbr\u003e\u003c\/p\u003e \u003cp\u003eAll Nitron shocks are hand made to order to each individual customer's requirements. Lead times are normally 2 - 3 weeks, but at certain times may be slightly longer. If you would like a more accurate delivery time please contact us.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003ePlease note:\u003c\/strong\u003e this kit requires the Nitron Damper Control Unit (DCU) to operate.\u003c\/p\u003e\u003ch3\u003eFront Axle Lift (FAL)\u003c\/h3\u003e\u003cp\u003eThis kit is supplied with the Nitron standalone Front Axle Lift system, letting you raise the front axle to clear speed bumps, ramps and steep driveways without affecting damping performance.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKey features:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eKit contains all components – lift cylinders, hydraulic lines, pump, mounting bracket, wiring loom and controller\u003c\/li\u003e\n\u003cli\u003e250W pump, typical lift time under 3 seconds\u003c\/li\u003e\n\u003cli\u003eAudible in-cabin warning system and switch with built-in warning light\u003c\/li\u003e\n\u003cli\u003eAuto-off function\u003c\/li\u003e\n\u003cli\u003eLift height varies by application – see the specification table below\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Nitron","offers":[{"title":"Default Title","offer_id":58532172792189,"sku":"NTCNI011ER3+FAL","price":10764.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/5767\/7352\/files\/NTCNI011ER3-FAL-01.jpg?v=1786634131"},{"product_id":"nitron-elec-tron-r3-coilovers-ford-mustang-s550-15-23-oem-wheels","title":"Nitron elec-TRON R3 Coilovers Ford Mustang S550 15-23 OEM Wheels","description":"\u003ch2\u003eNitron elec-TRON R3 Coilovers\u003c\/h2\u003e \u003cem\u003ePlease note: This kit uses the’s DNA electronic control system, so no additional products are required.\u003c\/em\u003e \u003cp\u003eThe elec-TRON R3 coilover kit combines the Nitron proportional solenoid valve with independent manual compression control. Designed for enthusiasts or professionals looking to further optimise their vehicle’s suspension performance for more extreme driving conditions and a higher level of performance. Piggyback or remotely mounted reservoirs allow quick and simple independent adjustment of high-speed and low-speed compression damping.\u003c\/p\u003e \u003cul\u003e \u003cli\u003e16 high-speed and 26 low-speed clicks, setting the baseline for the semi active system\u003c\/li\u003e \u003cli\u003eAdjustable top mounts and race springs\u003c\/li\u003e \u003cli\u003eRemote reservoirs for quick and simple compression adjustment\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e\u003cstrong\u003eTake the Next Step in Suspension Innovation\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eThe Nitron \u003cem\u003eelec-TRON\u003c\/em\u003e range is a fusion of world-renowned Nitron quality and attention to detail, combined with cutting-edge electronic valve technology. At the heart of the system is Nitron’s proportional solenoid valve, delivering unparalleled precision and control over the damping system. Each shock absorber in the \u003cem\u003eelec-TRON\u003c\/em\u003e system is equipped with an independent valve, allowing for individual damping control at each wheel. This is essential for optimising handling, stability and ride comfort.\u003c\/p\u003e \u003cp\u003eThe \u003cem\u003eelec-TRON\u003c\/em\u003e proportional valve operates within a range of 300-1800mA, providing a broad adjustment capability and a rapid response time of just 6 to 8 milliseconds from full hard to full soft. This system governs both compression and rebound damping. The valve is piston rod-mounted, fine-tuning the bleed characteristics of the shim stack, and is integrated with Nitron’s gas-pressurized mono-tube construction, ensuring maximum performance and reliability. This valve is compatible with both the R1 (electronic adjustment only) and the R3 (manual high and low-speed compression adjustment).\u003c\/p\u003e \u003cp\u003eIn the R3, the manual settings establish a baseline for the adjustments made by the main \u003cem\u003eelec-TRON\u003c\/em\u003e valve. The system can precisely adjust damping force based on a variety of factors such as g-load conditions, vehicle speed, road surface, and driver input. This results in highly accurate and responsive damping, significantly enhancing the overall performance of the vehicle.\u003c\/p\u003e \u003cp\u003eNote: Image used for illustration purposes only. Specific details, finishes and end fittings may differ from that shown.\u003cbr\u003e\u003c\/p\u003e \u003cp\u003eAll Nitron shocks are hand made to order to each individual customer's requirements. Lead times are normally 2 - 3 weeks, but at certain times may be slightly longer. If you would like a more accurate delivery time please contact us.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003ePlease note:\u003c\/strong\u003e this kit requires the Nitron Damper Control Unit (DCU) to operate.\u003c\/p\u003e","brand":"Nitron","offers":[{"title":"Road","offer_id":58532172857725,"sku":"NTCFO020ER3FRS","price":8478.0,"currency_code":"GBP","in_stock":true},{"title":"Track","offer_id":58532172890493,"sku":"NTCFO020ER3TDS","price":8478.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/5767\/7352\/files\/NitronR3-1_9752c2f0-5b49-46d8-a04e-c1f379e149de.jpg?v=1786634132"},{"product_id":"nitron-elec-tron-r3-coilovers-porsche-911-gt2-996-01-05","title":"Nitron elec-TRON R3 Coilovers Porsche 911 GT2 996 01-05","description":"\u003ch2\u003eNitron elec-TRON R3 Coilovers\u003c\/h2\u003e \u003cem\u003ePlease note: This kit uses the’s DNA electronic control system, so no additional products are required.\u003c\/em\u003e \u003cp\u003eThe elec-TRON R3 coilover kit combines the Nitron proportional solenoid valve with independent manual compression control. Designed for enthusiasts or professionals looking to further optimise their vehicle’s suspension performance for more extreme driving conditions and a higher level of performance. Piggyback or remotely mounted reservoirs allow quick and simple independent adjustment of high-speed and low-speed compression damping.\u003c\/p\u003e \u003cul\u003e \u003cli\u003e16 high-speed and 26 low-speed clicks, setting the baseline for the semi active system\u003c\/li\u003e \u003cli\u003eAdjustable top mounts and race springs\u003c\/li\u003e \u003cli\u003eRemote reservoirs for quick and simple compression adjustment\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e\u003cstrong\u003eTake the Next Step in Suspension Innovation\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eThe Nitron \u003cem\u003eelec-TRON\u003c\/em\u003e range is a fusion of world-renowned Nitron quality and attention to detail, combined with cutting-edge electronic valve technology. At the heart of the system is Nitron’s proportional solenoid valve, delivering unparalleled precision and control over the damping system. Each shock absorber in the \u003cem\u003eelec-TRON\u003c\/em\u003e system is equipped with an independent valve, allowing for individual damping control at each wheel. This is essential for optimising handling, stability and ride comfort.\u003c\/p\u003e \u003cp\u003eThe \u003cem\u003eelec-TRON\u003c\/em\u003e proportional valve operates within a range of 300-1800mA, providing a broad adjustment capability and a rapid response time of just 6 to 8 milliseconds from full hard to full soft. This system governs both compression and rebound damping. The valve is piston rod-mounted, fine-tuning the bleed characteristics of the shim stack, and is integrated with Nitron’s gas-pressurized mono-tube construction, ensuring maximum performance and reliability. This valve is compatible with both the R1 (electronic adjustment only) and the R3 (manual high and low-speed compression adjustment).\u003c\/p\u003e \u003cp\u003eIn the R3, the manual settings establish a baseline for the adjustments made by the main \u003cem\u003eelec-TRON\u003c\/em\u003e valve. The system can precisely adjust damping force based on a variety of factors such as g-load conditions, vehicle speed, road surface, and driver input. This results in highly accurate and responsive damping, significantly enhancing the overall performance of the vehicle.\u003c\/p\u003e \u003cp\u003eNote: Image used for illustration purposes only. Specific details, finishes and end fittings may differ from that shown.\u003cbr\u003e\u003c\/p\u003e \u003cp\u003eAll Nitron shocks are hand made to order to each individual customer's requirements. Lead times are normally 2 - 3 weeks, but at certain times may be slightly longer. If you would like a more accurate delivery time please contact us.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003ePlease note:\u003c\/strong\u003e this kit requires the Nitron Damper Control Unit (DCU) to operate.\u003c\/p\u003e","brand":"Nitron","offers":[{"title":"Default Title","offer_id":58532172923261,"sku":"NTCPO021ER3-911996GT2","price":7986.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/5767\/7352\/files\/NitronR3-1_b194a988-7d75-4fe1-b2e5-585e48146560.jpg?v=1786634128"},{"product_id":"nitron-elec-tron-r3-coilovers-chevrolet-corvette-competition-c5-c6-96-13-cnc-billet-mounts","title":"Nitron elec-TRON R3 Coilovers Chevrolet Corvette Competition C5 C6 96-13 CNC Billet Mounts","description":"\u003ch2\u003eNitron elec-TRON R3 Coilovers\u003c\/h2\u003e \u003cem\u003ePlease note: This kit uses the’s DNA electronic control system, so no additional products are required.\u003c\/em\u003e \u003cp\u003eThe elec-TRON R3 coilover kit combines the Nitron proportional solenoid valve with independent manual compression control. Designed for enthusiasts or professionals looking to further optimise their vehicle’s suspension performance for more extreme driving conditions and a higher level of performance. Piggyback or remotely mounted reservoirs allow quick and simple independent adjustment of high-speed and low-speed compression damping.\u003c\/p\u003e \u003cul\u003e \u003cli\u003e16 high-speed and 26 low-speed clicks, setting the baseline for the semi active system\u003c\/li\u003e \u003cli\u003eAdjustable top mounts and race springs\u003c\/li\u003e \u003cli\u003eRemote reservoirs for quick and simple compression adjustment\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e\u003cstrong\u003eTake the Next Step in Suspension Innovation\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eThe Nitron \u003cem\u003eelec-TRON\u003c\/em\u003e range is a fusion of world-renowned Nitron quality and attention to detail, combined with cutting-edge electronic valve technology. At the heart of the system is Nitron’s proportional solenoid valve, delivering unparalleled precision and control over the damping system. Each shock absorber in the \u003cem\u003eelec-TRON\u003c\/em\u003e system is equipped with an independent valve, allowing for individual damping control at each wheel. This is essential for optimising handling, stability and ride comfort.\u003c\/p\u003e \u003cp\u003eThe \u003cem\u003eelec-TRON\u003c\/em\u003e proportional valve operates within a range of 300-1800mA, providing a broad adjustment capability and a rapid response time of just 6 to 8 milliseconds from full hard to full soft. This system governs both compression and rebound damping. The valve is piston rod-mounted, fine-tuning the bleed characteristics of the shim stack, and is integrated with Nitron’s gas-pressurized mono-tube construction, ensuring maximum performance and reliability. This valve is compatible with both the R1 (electronic adjustment only) and the R3 (manual high and low-speed compression adjustment).\u003c\/p\u003e \u003cp\u003eIn the R3, the manual settings establish a baseline for the adjustments made by the main \u003cem\u003eelec-TRON\u003c\/em\u003e valve. The system can precisely adjust damping force based on a variety of factors such as g-load conditions, vehicle speed, road surface, and driver input. This results in highly accurate and responsive damping, significantly enhancing the overall performance of the vehicle.\u003c\/p\u003e \u003cp\u003eNote: Image used for illustration purposes only. Specific details, finishes and end fittings may differ from that shown.\u003cbr\u003e\u003c\/p\u003e \u003cp\u003eAll Nitron shocks are hand made to order to each individual customer's requirements. Lead times are normally 2 - 3 weeks, but at certain times may be slightly longer. If you would like a more accurate delivery time please contact us.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003ePlease note:\u003c\/strong\u003e this kit requires the Nitron Damper Control Unit (DCU) to operate.\u003c\/p\u003e","brand":"Nitron","offers":[{"title":"Road","offer_id":58532172956029,"sku":"NTCCH010ER3FRS","price":6672.0,"currency_code":"GBP","in_stock":true},{"title":"Track","offer_id":58532172988797,"sku":"NTCCH010ER3TDS","price":6672.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/5767\/7352\/files\/NitronR3-1_eb1ccc2c-5ad5-4ad8-ba04-64a2f17fbc89.jpg?v=1786634130"},{"product_id":"nitron-elec-tron-r3-coilovers-porsche-911-g-body-74-89","title":"Nitron elec-TRON R3 Coilovers Porsche 911 G-Body 74-89","description":"\u003ch2\u003eNitron elec-TRON R3 Coilovers\u003c\/h2\u003e \u003cem\u003ePlease note: This kit uses the’s DNA electronic control system, so no additional products are required.\u003c\/em\u003e \u003cp\u003eThe elec-TRON R3 coilover kit combines the Nitron proportional solenoid valve with independent manual compression control. Designed for enthusiasts or professionals looking to further optimise their vehicle’s suspension performance for more extreme driving conditions and a higher level of performance. Piggyback or remotely mounted reservoirs allow quick and simple independent adjustment of high-speed and low-speed compression damping.\u003c\/p\u003e \u003cul\u003e \u003cli\u003e16 high-speed and 26 low-speed clicks, setting the baseline for the semi active system\u003c\/li\u003e \u003cli\u003eAdjustable top mounts and race springs\u003c\/li\u003e \u003cli\u003eRemote reservoirs for quick and simple compression adjustment\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e\u003cstrong\u003eTake the Next Step in Suspension Innovation\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eThe Nitron \u003cem\u003eelec-TRON\u003c\/em\u003e range is a fusion of world-renowned Nitron quality and attention to detail, combined with cutting-edge electronic valve technology. At the heart of the system is Nitron’s proportional solenoid valve, delivering unparalleled precision and control over the damping system. Each shock absorber in the \u003cem\u003eelec-TRON\u003c\/em\u003e system is equipped with an independent valve, allowing for individual damping control at each wheel. This is essential for optimising handling, stability and ride comfort.\u003c\/p\u003e \u003cp\u003eThe \u003cem\u003eelec-TRON\u003c\/em\u003e proportional valve operates within a range of 300-1800mA, providing a broad adjustment capability and a rapid response time of just 6 to 8 milliseconds from full hard to full soft. This system governs both compression and rebound damping. The valve is piston rod-mounted, fine-tuning the bleed characteristics of the shim stack, and is integrated with Nitron’s gas-pressurized mono-tube construction, ensuring maximum performance and reliability. This valve is compatible with both the R1 (electronic adjustment only) and the R3 (manual high and low-speed compression adjustment).\u003c\/p\u003e \u003cp\u003eIn the R3, the manual settings establish a baseline for the adjustments made by the main \u003cem\u003eelec-TRON\u003c\/em\u003e valve. The system can precisely adjust damping force based on a variety of factors such as g-load conditions, vehicle speed, road surface, and driver input. This results in highly accurate and responsive damping, significantly enhancing the overall performance of the vehicle.\u003c\/p\u003e \u003cp\u003eNote: Image used for illustration purposes only. Specific details, finishes and end fittings may differ from that shown.\u003cbr\u003e\u003c\/p\u003e \u003cp\u003eAll Nitron shocks are hand made to order to each individual customer's requirements. Lead times are normally 2 - 3 weeks, but at certain times may be slightly longer. If you would like a more accurate delivery time please contact us.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003ePlease note:\u003c\/strong\u003e this kit requires the Nitron Damper Control Unit (DCU) to operate.\u003c\/p\u003e","brand":"Nitron","offers":[{"title":"Default Title","offer_id":58532173021565,"sku":"NTCPO033ER3","price":13746.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/5767\/7352\/files\/NitronR3-1_e46f6016-6a88-42b7-a31e-a3c7aa623886.jpg?v=1786634128"},{"product_id":"nitron-elec-tron-r3-coilovers-dodge-challenger-08","title":"Nitron elec-TRON R3 Coilovers Dodge Challenger 08+","description":"\u003ch2\u003eNitron elec-TRON R3 Coilovers\u003c\/h2\u003e \u003cem\u003ePlease note: This kit uses the’s DNA electronic control system, so no additional products are required.\u003c\/em\u003e \u003cp\u003eThe elec-TRON R3 coilover kit combines the Nitron proportional solenoid valve with independent manual compression control. Designed for enthusiasts or professionals looking to further optimise their vehicle’s suspension performance for more extreme driving conditions and a higher level of performance. Piggyback or remotely mounted reservoirs allow quick and simple independent adjustment of high-speed and low-speed compression damping.\u003c\/p\u003e \u003cul\u003e \u003cli\u003e16 high-speed and 26 low-speed clicks, setting the baseline for the semi active system\u003c\/li\u003e \u003cli\u003eAdjustable top mounts and race springs\u003c\/li\u003e \u003cli\u003eRemote reservoirs for quick and simple compression adjustment\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e\u003cstrong\u003eTake the Next Step in Suspension Innovation\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eThe Nitron \u003cem\u003eelec-TRON\u003c\/em\u003e range is a fusion of world-renowned Nitron quality and attention to detail, combined with cutting-edge electronic valve technology. At the heart of the system is Nitron’s proportional solenoid valve, delivering unparalleled precision and control over the damping system. Each shock absorber in the \u003cem\u003eelec-TRON\u003c\/em\u003e system is equipped with an independent valve, allowing for individual damping control at each wheel. This is essential for optimising handling, stability and ride comfort.\u003c\/p\u003e \u003cp\u003eThe \u003cem\u003eelec-TRON\u003c\/em\u003e proportional valve operates within a range of 300-1800mA, providing a broad adjustment capability and a rapid response time of just 6 to 8 milliseconds from full hard to full soft. This system governs both compression and rebound damping. The valve is piston rod-mounted, fine-tuning the bleed characteristics of the shim stack, and is integrated with Nitron’s gas-pressurized mono-tube construction, ensuring maximum performance and reliability. This valve is compatible with both the R1 (electronic adjustment only) and the R3 (manual high and low-speed compression adjustment).\u003c\/p\u003e \u003cp\u003eIn the R3, the manual settings establish a baseline for the adjustments made by the main \u003cem\u003eelec-TRON\u003c\/em\u003e valve. The system can precisely adjust damping force based on a variety of factors such as g-load conditions, vehicle speed, road surface, and driver input. This results in highly accurate and responsive damping, significantly enhancing the overall performance of the vehicle.\u003c\/p\u003e \u003cp\u003eNote: Image used for illustration purposes only. Specific details, finishes and end fittings may differ from that shown.\u003cbr\u003e\u003c\/p\u003e \u003cp\u003eAll Nitron shocks are hand made to order to each individual customer's requirements. Lead times are normally 2 - 3 weeks, but at certain times may be slightly longer. If you would like a more accurate delivery time please contact us.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003ePlease note:\u003c\/strong\u003e this kit requires the Nitron Damper Control Unit (DCU) to operate.\u003c\/p\u003e","brand":"Nitron","offers":[{"title":"Default Title","offer_id":58532173054333,"sku":"NTCDG011ER3","price":8688.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/5767\/7352\/files\/NitronR3-1_5765c63d-7b3b-4a49-b0ab-0a80fa0c7e1f.jpg?v=1786634130"},{"product_id":"nitron-elec-tron-r3-coilovers-vw-golf-mk8-tsi-r-4motion-20","title":"Nitron elec-TRON R3 Coilovers VW Golf Mk8 TSI R 4motion 20+","description":"\u003ch2\u003eNitron elec-TRON R3 Coilovers\u003c\/h2\u003e \u003cem\u003ePlease note: This kit uses the’s DNA electronic control system, so no additional products are required.\u003c\/em\u003e \u003cp\u003eThe elec-TRON R3 coilover kit combines the Nitron proportional solenoid valve with independent manual compression control. Designed for enthusiasts or professionals looking to further optimise their vehicle’s suspension performance for more extreme driving conditions and a higher level of performance. Piggyback or remotely mounted reservoirs allow quick and simple independent adjustment of high-speed and low-speed compression damping.\u003c\/p\u003e \u003cul\u003e \u003cli\u003e16 high-speed and 26 low-speed clicks, setting the baseline for the semi active system\u003c\/li\u003e \u003cli\u003eAdjustable top mounts and race springs\u003c\/li\u003e \u003cli\u003eRemote reservoirs for quick and simple compression adjustment\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e\u003cstrong\u003eTake the Next Step in Suspension Innovation\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eThe Nitron \u003cem\u003eelec-TRON\u003c\/em\u003e range is a fusion of world-renowned Nitron quality and attention to detail, combined with cutting-edge electronic valve technology. At the heart of the system is Nitron’s proportional solenoid valve, delivering unparalleled precision and control over the damping system. Each shock absorber in the \u003cem\u003eelec-TRON\u003c\/em\u003e system is equipped with an independent valve, allowing for individual damping control at each wheel. This is essential for optimising handling, stability and ride comfort.\u003c\/p\u003e \u003cp\u003eThe \u003cem\u003eelec-TRON\u003c\/em\u003e proportional valve operates within a range of 300-1800mA, providing a broad adjustment capability and a rapid response time of just 6 to 8 milliseconds from full hard to full soft. This system governs both compression and rebound damping. The valve is piston rod-mounted, fine-tuning the bleed characteristics of the shim stack, and is integrated with Nitron’s gas-pressurized mono-tube construction, ensuring maximum performance and reliability. This valve is compatible with both the R1 (electronic adjustment only) and the R3 (manual high and low-speed compression adjustment).\u003c\/p\u003e \u003cp\u003eIn the R3, the manual settings establish a baseline for the adjustments made by the main \u003cem\u003eelec-TRON\u003c\/em\u003e valve. The system can precisely adjust damping force based on a variety of factors such as g-load conditions, vehicle speed, road surface, and driver input. This results in highly accurate and responsive damping, significantly enhancing the overall performance of the vehicle.\u003c\/p\u003e \u003cp\u003eNote: Image used for illustration purposes only. Specific details, finishes and end fittings may differ from that shown.\u003cbr\u003e\u003c\/p\u003e \u003cp\u003eAll Nitron shocks are hand made to order to each individual customer's requirements. Lead times are normally 2 - 3 weeks, but at certain times may be slightly longer. If you would like a more accurate delivery time please contact us.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003ePlease note:\u003c\/strong\u003e this kit requires the Nitron Damper Control Unit (DCU) to operate.\u003c\/p\u003e","brand":"Nitron","offers":[{"title":"Default Title","offer_id":58532173087101,"sku":"NTCVW011ER3","price":7194.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/5767\/7352\/files\/NitronR3-1_00865392-8bbd-4d40-a53c-a0452ea84b9a.jpg?v=1786634127"},{"product_id":"nitron-elec-tron-r3-coilovers-porsche-911-carrera-997-04-13-with-standalone-fal","title":"Nitron elec-TRON R3 Coilovers Porsche 911 Carrera 997 04-13 With Standalone FAL","description":"\u003ch2\u003eNitron elec-TRON R3 Coilovers\u003c\/h2\u003e \u003cem\u003ePlease note: This kit uses the’s DNA electronic control system, so no additional products are required.\u003c\/em\u003e \u003cp\u003eThe elec-TRON R3 coilover kit combines the Nitron proportional solenoid valve with independent manual compression control. Designed for enthusiasts or professionals looking to further optimise their vehicle’s suspension performance for more extreme driving conditions and a higher level of performance. Piggyback or remotely mounted reservoirs allow quick and simple independent adjustment of high-speed and low-speed compression damping.\u003c\/p\u003e \u003cul\u003e \u003cli\u003e16 high-speed and 26 low-speed clicks, setting the baseline for the semi active system\u003c\/li\u003e \u003cli\u003eAdjustable top mounts and race springs\u003c\/li\u003e \u003cli\u003eRemote reservoirs for quick and simple compression adjustment\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e\u003cstrong\u003eTake the Next Step in Suspension Innovation\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eThe Nitron \u003cem\u003eelec-TRON\u003c\/em\u003e range is a fusion of world-renowned Nitron quality and attention to detail, combined with cutting-edge electronic valve technology. At the heart of the system is Nitron’s proportional solenoid valve, delivering unparalleled precision and control over the damping system. Each shock absorber in the \u003cem\u003eelec-TRON\u003c\/em\u003e system is equipped with an independent valve, allowing for individual damping control at each wheel. This is essential for optimising handling, stability and ride comfort.\u003c\/p\u003e \u003cp\u003eThe \u003cem\u003eelec-TRON\u003c\/em\u003e proportional valve operates within a range of 300-1800mA, providing a broad adjustment capability and a rapid response time of just 6 to 8 milliseconds from full hard to full soft. This system governs both compression and rebound damping. The valve is piston rod-mounted, fine-tuning the bleed characteristics of the shim stack, and is integrated with Nitron’s gas-pressurized mono-tube construction, ensuring maximum performance and reliability. This valve is compatible with both the R1 (electronic adjustment only) and the R3 (manual high and low-speed compression adjustment).\u003c\/p\u003e \u003cp\u003eIn the R3, the manual settings establish a baseline for the adjustments made by the main \u003cem\u003eelec-TRON\u003c\/em\u003e valve. The system can precisely adjust damping force based on a variety of factors such as g-load conditions, vehicle speed, road surface, and driver input. This results in highly accurate and responsive damping, significantly enhancing the overall performance of the vehicle.\u003c\/p\u003e \u003cp\u003eNote: Image used for illustration purposes only. Specific details, finishes and end fittings may differ from that shown.\u003cbr\u003e\u003c\/p\u003e \u003cp\u003eAll Nitron shocks are hand made to order to each individual customer's requirements. Lead times are normally 2 - 3 weeks, but at certain times may be slightly longer. If you would like a more accurate delivery time please contact us.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003ePlease note:\u003c\/strong\u003e this kit requires the Nitron Damper Control Unit (DCU) to operate.\u003c\/p\u003e\u003ch3\u003eFront Axle Lift (FAL)\u003c\/h3\u003e\u003cp\u003eThis kit is supplied with the Nitron standalone Front Axle Lift system, letting you raise the front axle to clear speed bumps, ramps and steep driveways without affecting damping performance.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKey features:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eKit contains all components – lift cylinders, hydraulic lines, pump, mounting bracket, wiring loom and controller\u003c\/li\u003e\n\u003cli\u003e250W pump, typical lift time under 3 seconds\u003c\/li\u003e\n\u003cli\u003eAudible in-cabin warning system and switch with built-in warning light\u003c\/li\u003e\n\u003cli\u003eAuto-off function\u003c\/li\u003e\n\u003cli\u003eLift height varies by application – see the specification table below\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Nitron","offers":[{"title":"Default Title","offer_id":58532173119869,"sku":"NTCPO022ER3+FAL","price":11166.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/5767\/7352\/files\/NTCPO022ER3-FAL-01.jpg?v=1786634128"},{"product_id":"nitron-elec-tron-r3-coilovers-porsche-911-carrera-997-04-13","title":"Nitron elec-TRON R3 Coilovers Porsche 911 Carrera 997 04-13","description":"\u003ch2\u003eNitron elec-TRON R3 Coilovers\u003c\/h2\u003e \u003cem\u003ePlease note: This kit uses the’s DNA electronic control system, so no additional products are required.\u003c\/em\u003e \u003cp\u003eThe elec-TRON R3 coilover kit combines the Nitron proportional solenoid valve with independent manual compression control. Designed for enthusiasts or professionals looking to further optimise their vehicle’s suspension performance for more extreme driving conditions and a higher level of performance. Piggyback or remotely mounted reservoirs allow quick and simple independent adjustment of high-speed and low-speed compression damping.\u003c\/p\u003e \u003cul\u003e \u003cli\u003e16 high-speed and 26 low-speed clicks, setting the baseline for the semi active system\u003c\/li\u003e \u003cli\u003eAdjustable top mounts and race springs\u003c\/li\u003e \u003cli\u003eRemote reservoirs for quick and simple compression adjustment\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e\u003cstrong\u003eTake the Next Step in Suspension Innovation\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eThe Nitron \u003cem\u003eelec-TRON\u003c\/em\u003e range is a fusion of world-renowned Nitron quality and attention to detail, combined with cutting-edge electronic valve technology. At the heart of the system is Nitron’s proportional solenoid valve, delivering unparalleled precision and control over the damping system. Each shock absorber in the \u003cem\u003eelec-TRON\u003c\/em\u003e system is equipped with an independent valve, allowing for individual damping control at each wheel. This is essential for optimising handling, stability and ride comfort.\u003c\/p\u003e \u003cp\u003eThe \u003cem\u003eelec-TRON\u003c\/em\u003e proportional valve operates within a range of 300-1800mA, providing a broad adjustment capability and a rapid response time of just 6 to 8 milliseconds from full hard to full soft. This system governs both compression and rebound damping. The valve is piston rod-mounted, fine-tuning the bleed characteristics of the shim stack, and is integrated with Nitron’s gas-pressurized mono-tube construction, ensuring maximum performance and reliability. This valve is compatible with both the R1 (electronic adjustment only) and the R3 (manual high and low-speed compression adjustment).\u003c\/p\u003e \u003cp\u003eIn the R3, the manual settings establish a baseline for the adjustments made by the main \u003cem\u003eelec-TRON\u003c\/em\u003e valve. The system can precisely adjust damping force based on a variety of factors such as g-load conditions, vehicle speed, road surface, and driver input. This results in highly accurate and responsive damping, significantly enhancing the overall performance of the vehicle.\u003c\/p\u003e \u003cp\u003eNote: Image used for illustration purposes only. Specific details, finishes and end fittings may differ from that shown.\u003cbr\u003e\u003c\/p\u003e \u003cp\u003eAll Nitron shocks are hand made to order to each individual customer's requirements. Lead times are normally 2 - 3 weeks, but at certain times may be slightly longer. If you would like a more accurate delivery time please contact us.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003ePlease note:\u003c\/strong\u003e this kit requires the Nitron Damper Control Unit (DCU) to operate.\u003c\/p\u003e","brand":"Nitron","offers":[{"title":"Default Title","offer_id":58532173185405,"sku":"NTCPO022ER3","price":7986.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/5767\/7352\/files\/NitronR3-1_fd01d076-c707-46de-b56e-affc71bd4a6d.jpg?v=1786634127"},{"product_id":"nitron-elec-tron-r3-coilovers-lamborghini-gallardo-03-14-with-standalone-fal","title":"Nitron elec-TRON R3 Coilovers Lamborghini Gallardo 03-14 With Standalone FAL","description":"\u003ch2\u003eNitron elec-TRON R3 Coilovers\u003c\/h2\u003e \u003cem\u003ePlease note: This kit uses the’s DNA electronic control system, so no additional products are required.\u003c\/em\u003e \u003cp\u003eThe elec-TRON R3 coilover kit combines the Nitron proportional solenoid valve with independent manual compression control. Designed for enthusiasts or professionals looking to further optimise their vehicle’s suspension performance for more extreme driving conditions and a higher level of performance. Piggyback or remotely mounted reservoirs allow quick and simple independent adjustment of high-speed and low-speed compression damping.\u003c\/p\u003e \u003cul\u003e \u003cli\u003e16 high-speed and 26 low-speed clicks, setting the baseline for the semi active system\u003c\/li\u003e \u003cli\u003eAdjustable top mounts and race springs\u003c\/li\u003e \u003cli\u003eRemote reservoirs for quick and simple compression adjustment\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e\u003cstrong\u003eTake the Next Step in Suspension Innovation\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eThe Nitron \u003cem\u003eelec-TRON\u003c\/em\u003e range is a fusion of world-renowned Nitron quality and attention to detail, combined with cutting-edge electronic valve technology. At the heart of the system is Nitron’s proportional solenoid valve, delivering unparalleled precision and control over the damping system. Each shock absorber in the \u003cem\u003eelec-TRON\u003c\/em\u003e system is equipped with an independent valve, allowing for individual damping control at each wheel. This is essential for optimising handling, stability and ride comfort.\u003c\/p\u003e \u003cp\u003eThe \u003cem\u003eelec-TRON\u003c\/em\u003e proportional valve operates within a range of 300-1800mA, providing a broad adjustment capability and a rapid response time of just 6 to 8 milliseconds from full hard to full soft. This system governs both compression and rebound damping. The valve is piston rod-mounted, fine-tuning the bleed characteristics of the shim stack, and is integrated with Nitron’s gas-pressurized mono-tube construction, ensuring maximum performance and reliability. This valve is compatible with both the R1 (electronic adjustment only) and the R3 (manual high and low-speed compression adjustment).\u003c\/p\u003e \u003cp\u003eIn the R3, the manual settings establish a baseline for the adjustments made by the main \u003cem\u003eelec-TRON\u003c\/em\u003e valve. The system can precisely adjust damping force based on a variety of factors such as g-load conditions, vehicle speed, road surface, and driver input. This results in highly accurate and responsive damping, significantly enhancing the overall performance of the vehicle.\u003c\/p\u003e \u003cp\u003eNote: Image used for illustration purposes only. Specific details, finishes and end fittings may differ from that shown.\u003cbr\u003e\u003c\/p\u003e \u003cp\u003eAll Nitron shocks are hand made to order to each individual customer's requirements. Lead times are normally 2 - 3 weeks, but at certain times may be slightly longer. If you would like a more accurate delivery time please contact us.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003ePlease note:\u003c\/strong\u003e this kit requires the Nitron Damper Control Unit (DCU) to operate.\u003c\/p\u003e\u003ch3\u003eFront Axle Lift (FAL)\u003c\/h3\u003e\u003cp\u003eThis kit is supplied with the Nitron standalone Front Axle Lift system, letting you raise the front axle to clear speed bumps, ramps and steep driveways without affecting damping performance.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKey features:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eKit contains all components – lift cylinders, hydraulic lines, pump, mounting bracket, wiring loom and controller\u003c\/li\u003e\n\u003cli\u003e250W pump, typical lift time under 3 seconds\u003c\/li\u003e\n\u003cli\u003eAudible in-cabin warning system and switch with built-in warning light\u003c\/li\u003e\n\u003cli\u003eAuto-off function\u003c\/li\u003e\n\u003cli\u003eLift height varies by application – see the specification table below\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Nitron","offers":[{"title":"Default Title","offer_id":58532173283709,"sku":"NTCLA010ER3+FAL","price":9486.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/5767\/7352\/files\/NTCLA010ER3-FAL-01.jpg?v=1786634127"},{"product_id":"nitron-elec-tron-r3-coilovers-porsche-911-carrera-4-997-04-13","title":"Nitron elec-TRON R3 Coilovers Porsche 911 Carrera 4 997 04-13","description":"\u003ch2\u003eNitron elec-TRON R3 Coilovers\u003c\/h2\u003e \u003cem\u003ePlease note: This kit uses the’s DNA electronic control system, so no additional products are required.\u003c\/em\u003e \u003cp\u003eThe elec-TRON R3 coilover kit combines the Nitron proportional solenoid valve with independent manual compression control. Designed for enthusiasts or professionals looking to further optimise their vehicle’s suspension performance for more extreme driving conditions and a higher level of performance. Piggyback or remotely mounted reservoirs allow quick and simple independent adjustment of high-speed and low-speed compression damping.\u003c\/p\u003e \u003cul\u003e \u003cli\u003e16 high-speed and 26 low-speed clicks, setting the baseline for the semi active system\u003c\/li\u003e \u003cli\u003eAdjustable top mounts and race springs\u003c\/li\u003e \u003cli\u003eRemote reservoirs for quick and simple compression adjustment\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e\u003cstrong\u003eTake the Next Step in Suspension Innovation\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eThe Nitron \u003cem\u003eelec-TRON\u003c\/em\u003e range is a fusion of world-renowned Nitron quality and attention to detail, combined with cutting-edge electronic valve technology. At the heart of the system is Nitron’s proportional solenoid valve, delivering unparalleled precision and control over the damping system. Each shock absorber in the \u003cem\u003eelec-TRON\u003c\/em\u003e system is equipped with an independent valve, allowing for individual damping control at each wheel. This is essential for optimising handling, stability and ride comfort.\u003c\/p\u003e \u003cp\u003eThe \u003cem\u003eelec-TRON\u003c\/em\u003e proportional valve operates within a range of 300-1800mA, providing a broad adjustment capability and a rapid response time of just 6 to 8 milliseconds from full hard to full soft. This system governs both compression and rebound damping. The valve is piston rod-mounted, fine-tuning the bleed characteristics of the shim stack, and is integrated with Nitron’s gas-pressurized mono-tube construction, ensuring maximum performance and reliability. This valve is compatible with both the R1 (electronic adjustment only) and the R3 (manual high and low-speed compression adjustment).\u003c\/p\u003e \u003cp\u003eIn the R3, the manual settings establish a baseline for the adjustments made by the main \u003cem\u003eelec-TRON\u003c\/em\u003e valve. The system can precisely adjust damping force based on a variety of factors such as g-load conditions, vehicle speed, road surface, and driver input. This results in highly accurate and responsive damping, significantly enhancing the overall performance of the vehicle.\u003c\/p\u003e \u003cp\u003eNote: Image used for illustration purposes only. Specific details, finishes and end fittings may differ from that shown.\u003cbr\u003e\u003c\/p\u003e \u003cp\u003eAll Nitron shocks are hand made to order to each individual customer's requirements. Lead times are normally 2 - 3 weeks, but at certain times may be slightly longer. If you would like a more accurate delivery time please contact us.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003ePlease note:\u003c\/strong\u003e this kit requires the Nitron Damper Control Unit (DCU) to operate.\u003c\/p\u003e","brand":"Nitron","offers":[{"title":"Default Title","offer_id":58532173316477,"sku":"NTCPO026ER3","price":8082.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/5767\/7352\/files\/NitronR3-1_11156b3d-8eec-4fbb-8e6f-763bf3c1450d.jpg?v=1786634130"},{"product_id":"nitron-elec-tron-r3-coilovers-bmw-m3-e90-04-12","title":"Nitron elec-TRON R3 Coilovers BMW M3 E90 04-12","description":"\u003ch2\u003eNitron elec-TRON R3 Coilovers\u003c\/h2\u003e \u003cem\u003ePlease note: This kit uses the’s DNA electronic control system, so no additional products are required.\u003c\/em\u003e \u003cp\u003eThe elec-TRON R3 coilover kit combines the Nitron proportional solenoid valve with independent manual compression control. Designed for enthusiasts or professionals looking to further optimise their vehicle’s suspension performance for more extreme driving conditions and a higher level of performance. Piggyback or remotely mounted reservoirs allow quick and simple independent adjustment of high-speed and low-speed compression damping.\u003c\/p\u003e \u003cul\u003e \u003cli\u003e16 high-speed and 26 low-speed clicks, setting the baseline for the semi active system\u003c\/li\u003e \u003cli\u003eAdjustable top mounts and race springs\u003c\/li\u003e \u003cli\u003eRemote reservoirs for quick and simple compression adjustment\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e\u003cstrong\u003eTake the Next Step in Suspension Innovation\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eThe Nitron \u003cem\u003eelec-TRON\u003c\/em\u003e range is a fusion of world-renowned Nitron quality and attention to detail, combined with cutting-edge electronic valve technology. At the heart of the system is Nitron’s proportional solenoid valve, delivering unparalleled precision and control over the damping system. Each shock absorber in the \u003cem\u003eelec-TRON\u003c\/em\u003e system is equipped with an independent valve, allowing for individual damping control at each wheel. This is essential for optimising handling, stability and ride comfort.\u003c\/p\u003e \u003cp\u003eThe \u003cem\u003eelec-TRON\u003c\/em\u003e proportional valve operates within a range of 300-1800mA, providing a broad adjustment capability and a rapid response time of just 6 to 8 milliseconds from full hard to full soft. This system governs both compression and rebound damping. The valve is piston rod-mounted, fine-tuning the bleed characteristics of the shim stack, and is integrated with Nitron’s gas-pressurized mono-tube construction, ensuring maximum performance and reliability. This valve is compatible with both the R1 (electronic adjustment only) and the R3 (manual high and low-speed compression adjustment).\u003c\/p\u003e \u003cp\u003eIn the R3, the manual settings establish a baseline for the adjustments made by the main \u003cem\u003eelec-TRON\u003c\/em\u003e valve. The system can precisely adjust damping force based on a variety of factors such as g-load conditions, vehicle speed, road surface, and driver input. This results in highly accurate and responsive damping, significantly enhancing the overall performance of the vehicle.\u003c\/p\u003e \u003cp\u003eNote: Image used for illustration purposes only. Specific details, finishes and end fittings may differ from that shown.\u003cbr\u003e\u003c\/p\u003e \u003cp\u003eAll Nitron shocks are hand made to order to each individual customer's requirements. Lead times are normally 2 - 3 weeks, but at certain times may be slightly longer. If you would like a more accurate delivery time please contact us.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003ePlease note:\u003c\/strong\u003e this kit requires the Nitron Damper Control Unit (DCU) to operate.\u003c\/p\u003e","brand":"Nitron","offers":[{"title":"Road","offer_id":58532173382013,"sku":"NTCBM014ER3FRS-E90","price":7668.0,"currency_code":"GBP","in_stock":true},{"title":"Track","offer_id":58532173414781,"sku":"NTCBM014ER3TDS-E90","price":7668.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/5767\/7352\/files\/NTCBM014ER3-01_285dd00b-eeac-4250-a6ed-569953fd37ac.jpg?v=1786634132"},{"product_id":"nitron-elec-tron-r3-coilovers-chevrolet-corvette-c8-20-with-standalone-fal","title":"Nitron elec-TRON R3 Coilovers Chevrolet Corvette C8 20+ With Standalone FAL","description":"\u003ch2\u003eNitron elec-TRON R3 Coilovers\u003c\/h2\u003e \u003cem\u003ePlease note: This kit uses the’s DNA electronic control system, so no additional products are required.\u003c\/em\u003e \u003cp\u003eThe elec-TRON R3 coilover kit combines the Nitron proportional solenoid valve with independent manual compression control. Designed for enthusiasts or professionals looking to further optimise their vehicle’s suspension performance for more extreme driving conditions and a higher level of performance. Piggyback or remotely mounted reservoirs allow quick and simple independent adjustment of high-speed and low-speed compression damping.\u003c\/p\u003e \u003cul\u003e \u003cli\u003e16 high-speed and 26 low-speed clicks, setting the baseline for the semi active system\u003c\/li\u003e \u003cli\u003eAdjustable top mounts and race springs\u003c\/li\u003e \u003cli\u003eRemote reservoirs for quick and simple compression adjustment\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e\u003cstrong\u003eTake the Next Step in Suspension Innovation\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eThe Nitron \u003cem\u003eelec-TRON\u003c\/em\u003e range is a fusion of world-renowned Nitron quality and attention to detail, combined with cutting-edge electronic valve technology. At the heart of the system is Nitron’s proportional solenoid valve, delivering unparalleled precision and control over the damping system. Each shock absorber in the \u003cem\u003eelec-TRON\u003c\/em\u003e system is equipped with an independent valve, allowing for individual damping control at each wheel. This is essential for optimising handling, stability and ride comfort.\u003c\/p\u003e \u003cp\u003eThe \u003cem\u003eelec-TRON\u003c\/em\u003e proportional valve operates within a range of 300-1800mA, providing a broad adjustment capability and a rapid response time of just 6 to 8 milliseconds from full hard to full soft. This system governs both compression and rebound damping. The valve is piston rod-mounted, fine-tuning the bleed characteristics of the shim stack, and is integrated with Nitron’s gas-pressurized mono-tube construction, ensuring maximum performance and reliability. This valve is compatible with both the R1 (electronic adjustment only) and the R3 (manual high and low-speed compression adjustment).\u003c\/p\u003e \u003cp\u003eIn the R3, the manual settings establish a baseline for the adjustments made by the main \u003cem\u003eelec-TRON\u003c\/em\u003e valve. The system can precisely adjust damping force based on a variety of factors such as g-load conditions, vehicle speed, road surface, and driver input. This results in highly accurate and responsive damping, significantly enhancing the overall performance of the vehicle.\u003c\/p\u003e \u003cp\u003eNote: Image used for illustration purposes only. Specific details, finishes and end fittings may differ from that shown.\u003cbr\u003e\u003c\/p\u003e \u003cp\u003eAll Nitron shocks are hand made to order to each individual customer's requirements. Lead times are normally 2 - 3 weeks, but at certain times may be slightly longer. If you would like a more accurate delivery time please contact us.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003ePlease note:\u003c\/strong\u003e this kit requires the Nitron Damper Control Unit (DCU) to operate.\u003c\/p\u003e\u003ch3\u003eFront Axle Lift (FAL)\u003c\/h3\u003e\u003cp\u003eThis kit is supplied with the Nitron standalone Front Axle Lift system, letting you raise the front axle to clear speed bumps, ramps and steep driveways without affecting damping performance.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKey features:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eKit contains all components – lift cylinders, hydraulic lines, pump, mounting bracket, wiring loom and controller\u003c\/li\u003e\n\u003cli\u003e250W pump, typical lift time under 3 seconds\u003c\/li\u003e\n\u003cli\u003eAudible in-cabin warning system and switch with built-in warning light\u003c\/li\u003e\n\u003cli\u003eAuto-off function\u003c\/li\u003e\n\u003cli\u003eLift height varies by application – see the specification table below\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Nitron","offers":[{"title":"Road","offer_id":58532173480317,"sku":"NTCCH014ER3FRS+FAL","price":12678.0,"currency_code":"GBP","in_stock":true},{"title":"Track","offer_id":58532173513085,"sku":"NTCCH014ER3TDS+FAL","price":12678.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/5767\/7352\/files\/NitronR3wFal-1_c8a32740-d614-42a0-9638-f9b1d02d319d.jpg?v=1786634134"},{"product_id":"nitron-elec-tron-r3-coilovers-nissan-r35-gt-r-07","title":"Nitron elec-TRON R3 Coilovers Nissan R35 GT-R 07+","description":"\u003ch2\u003eNitron elec-TRON R3 Coilovers\u003c\/h2\u003e \u003cem\u003ePlease note: This kit uses the’s DNA electronic control system, so no additional products are required.\u003c\/em\u003e \u003cp\u003eThe elec-TRON R3 coilover kit combines the Nitron proportional solenoid valve with independent manual compression control. Designed for enthusiasts or professionals looking to further optimise their vehicle’s suspension performance for more extreme driving conditions and a higher level of performance. Piggyback or remotely mounted reservoirs allow quick and simple independent adjustment of high-speed and low-speed compression damping.\u003c\/p\u003e \u003cul\u003e \u003cli\u003e16 high-speed and 26 low-speed clicks, setting the baseline for the semi active system\u003c\/li\u003e \u003cli\u003eAdjustable top mounts and race springs\u003c\/li\u003e \u003cli\u003eRemote reservoirs for quick and simple compression adjustment\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e\u003cstrong\u003eTake the Next Step in Suspension Innovation\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eThe Nitron \u003cem\u003eelec-TRON\u003c\/em\u003e range is a fusion of world-renowned Nitron quality and attention to detail, combined with cutting-edge electronic valve technology. At the heart of the system is Nitron’s proportional solenoid valve, delivering unparalleled precision and control over the damping system. Each shock absorber in the \u003cem\u003eelec-TRON\u003c\/em\u003e system is equipped with an independent valve, allowing for individual damping control at each wheel. This is essential for optimising handling, stability and ride comfort.\u003c\/p\u003e \u003cp\u003eThe \u003cem\u003eelec-TRON\u003c\/em\u003e proportional valve operates within a range of 300-1800mA, providing a broad adjustment capability and a rapid response time of just 6 to 8 milliseconds from full hard to full soft. This system governs both compression and rebound damping. The valve is piston rod-mounted, fine-tuning the bleed characteristics of the shim stack, and is integrated with Nitron’s gas-pressurized mono-tube construction, ensuring maximum performance and reliability. This valve is compatible with both the R1 (electronic adjustment only) and the R3 (manual high and low-speed compression adjustment).\u003c\/p\u003e \u003cp\u003eIn the R3, the manual settings establish a baseline for the adjustments made by the main \u003cem\u003eelec-TRON\u003c\/em\u003e valve. The system can precisely adjust damping force based on a variety of factors such as g-load conditions, vehicle speed, road surface, and driver input. This results in highly accurate and responsive damping, significantly enhancing the overall performance of the vehicle.\u003c\/p\u003e \u003cp\u003eNote: Image used for illustration purposes only. Specific details, finishes and end fittings may differ from that shown.\u003cbr\u003e\u003c\/p\u003e \u003cp\u003eAll Nitron shocks are hand made to order to each individual customer's requirements. Lead times are normally 2 - 3 weeks, but at certain times may be slightly longer. If you would like a more accurate delivery time please contact us.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003ePlease note:\u003c\/strong\u003e this kit requires the Nitron Damper Control Unit (DCU) to operate.\u003c\/p\u003e","brand":"Nitron","offers":[{"title":"Default Title","offer_id":58532173545853,"sku":"NTCNI015ER3","price":7098.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/5767\/7352\/files\/NTCNI015ER3-01.jpg?v=1786634128"},{"product_id":"nitron-elec-tron-r3-coilovers-porsche-cayman-987-04-12","title":"Nitron elec-TRON R3 Coilovers Porsche Cayman 987 04-12","description":"\u003ch2\u003eNitron elec-TRON R3 Coilovers\u003c\/h2\u003e \u003cem\u003ePlease note: This kit uses the’s DNA electronic control system, so no additional products are required.\u003c\/em\u003e \u003cp\u003eThe elec-TRON R3 coilover kit combines the Nitron proportional solenoid valve with independent manual compression control. Designed for enthusiasts or professionals looking to further optimise their vehicle’s suspension performance for more extreme driving conditions and a higher level of performance. Piggyback or remotely mounted reservoirs allow quick and simple independent adjustment of high-speed and low-speed compression damping.\u003c\/p\u003e \u003cul\u003e \u003cli\u003e16 high-speed and 26 low-speed clicks, setting the baseline for the semi active system\u003c\/li\u003e \u003cli\u003eAdjustable top mounts and race springs\u003c\/li\u003e \u003cli\u003eRemote reservoirs for quick and simple compression adjustment\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e\u003cstrong\u003eTake the Next Step in Suspension Innovation\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eThe Nitron \u003cem\u003eelec-TRON\u003c\/em\u003e range is a fusion of world-renowned Nitron quality and attention to detail, combined with cutting-edge electronic valve technology. At the heart of the system is Nitron’s proportional solenoid valve, delivering unparalleled precision and control over the damping system. Each shock absorber in the \u003cem\u003eelec-TRON\u003c\/em\u003e system is equipped with an independent valve, allowing for individual damping control at each wheel. This is essential for optimising handling, stability and ride comfort.\u003c\/p\u003e \u003cp\u003eThe \u003cem\u003eelec-TRON\u003c\/em\u003e proportional valve operates within a range of 300-1800mA, providing a broad adjustment capability and a rapid response time of just 6 to 8 milliseconds from full hard to full soft. This system governs both compression and rebound damping. The valve is piston rod-mounted, fine-tuning the bleed characteristics of the shim stack, and is integrated with Nitron’s gas-pressurized mono-tube construction, ensuring maximum performance and reliability. This valve is compatible with both the R1 (electronic adjustment only) and the R3 (manual high and low-speed compression adjustment).\u003c\/p\u003e \u003cp\u003eIn the R3, the manual settings establish a baseline for the adjustments made by the main \u003cem\u003eelec-TRON\u003c\/em\u003e valve. The system can precisely adjust damping force based on a variety of factors such as g-load conditions, vehicle speed, road surface, and driver input. This results in highly accurate and responsive damping, significantly enhancing the overall performance of the vehicle.\u003c\/p\u003e \u003cp\u003eNote: Image used for illustration purposes only. Specific details, finishes and end fittings may differ from that shown.\u003cbr\u003e\u003c\/p\u003e \u003cp\u003eAll Nitron shocks are hand made to order to each individual customer's requirements. Lead times are normally 2 - 3 weeks, but at certain times may be slightly longer. If you would like a more accurate delivery time please contact us.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003ePlease note:\u003c\/strong\u003e this kit requires the Nitron Damper Control Unit (DCU) to operate.\u003c\/p\u003e","brand":"Nitron","offers":[{"title":"Default Title","offer_id":58532173611389,"sku":"NTCPO030ER3","price":8718.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/5767\/7352\/files\/NitronR3-1_bc8686e4-fcba-4311-89a5-a384f7eaf221.jpg?v=1786634129"},{"product_id":"nitron-elec-tron-r3-coilovers-nissan-skyline-r34-gt-r-99-02-with-standalone-fal","title":"Nitron elec-TRON R3 Coilovers Nissan Skyline R34 GT-R 99-02 With Standalone FAL","description":"\u003ch2\u003eNitron elec-TRON R3 Coilovers\u003c\/h2\u003e \u003cem\u003ePlease note: This kit uses the’s DNA electronic control system, so no additional products are required.\u003c\/em\u003e \u003cp\u003eThe elec-TRON R3 coilover kit combines the Nitron proportional solenoid valve with independent manual compression control. Designed for enthusiasts or professionals looking to further optimise their vehicle’s suspension performance for more extreme driving conditions and a higher level of performance. Piggyback or remotely mounted reservoirs allow quick and simple independent adjustment of high-speed and low-speed compression damping.\u003c\/p\u003e \u003cul\u003e \u003cli\u003e16 high-speed and 26 low-speed clicks, setting the baseline for the semi active system\u003c\/li\u003e \u003cli\u003eAdjustable top mounts and race springs\u003c\/li\u003e \u003cli\u003eRemote reservoirs for quick and simple compression adjustment\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e\u003cstrong\u003eTake the Next Step in Suspension Innovation\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eThe Nitron \u003cem\u003eelec-TRON\u003c\/em\u003e range is a fusion of world-renowned Nitron quality and attention to detail, combined with cutting-edge electronic valve technology. At the heart of the system is Nitron’s proportional solenoid valve, delivering unparalleled precision and control over the damping system. Each shock absorber in the \u003cem\u003eelec-TRON\u003c\/em\u003e system is equipped with an independent valve, allowing for individual damping control at each wheel. This is essential for optimising handling, stability and ride comfort.\u003c\/p\u003e \u003cp\u003eThe \u003cem\u003eelec-TRON\u003c\/em\u003e proportional valve operates within a range of 300-1800mA, providing a broad adjustment capability and a rapid response time of just 6 to 8 milliseconds from full hard to full soft. This system governs both compression and rebound damping. The valve is piston rod-mounted, fine-tuning the bleed characteristics of the shim stack, and is integrated with Nitron’s gas-pressurized mono-tube construction, ensuring maximum performance and reliability. This valve is compatible with both the R1 (electronic adjustment only) and the R3 (manual high and low-speed compression adjustment).\u003c\/p\u003e \u003cp\u003eIn the R3, the manual settings establish a baseline for the adjustments made by the main \u003cem\u003eelec-TRON\u003c\/em\u003e valve. The system can precisely adjust damping force based on a variety of factors such as g-load conditions, vehicle speed, road surface, and driver input. This results in highly accurate and responsive damping, significantly enhancing the overall performance of the vehicle.\u003c\/p\u003e \u003cp\u003eNote: Image used for illustration purposes only. Specific details, finishes and end fittings may differ from that shown.\u003cbr\u003e\u003c\/p\u003e \u003cp\u003eAll Nitron shocks are hand made to order to each individual customer's requirements. Lead times are normally 2 - 3 weeks, but at certain times may be slightly longer. If you would like a more accurate delivery time please contact us.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003ePlease note:\u003c\/strong\u003e this kit requires the Nitron Damper Control Unit (DCU) to operate.\u003c\/p\u003e\u003ch3\u003eFront Axle Lift (FAL)\u003c\/h3\u003e\u003cp\u003eThis kit is supplied with the Nitron standalone Front Axle Lift system, letting you raise the front axle to clear speed bumps, ramps and steep driveways without affecting damping performance.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKey features:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eKit contains all components – lift cylinders, hydraulic lines, pump, mounting bracket, wiring loom and controller\u003c\/li\u003e\n\u003cli\u003e250W pump, typical lift time under 3 seconds\u003c\/li\u003e\n\u003cli\u003eAudible in-cabin warning system and switch with built-in warning light\u003c\/li\u003e\n\u003cli\u003eAuto-off function\u003c\/li\u003e\n\u003cli\u003eLift height varies by application – see the specification table below\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Nitron","offers":[{"title":"Default Title","offer_id":58532173676925,"sku":"NTCNI012ER3+FAL","price":10764.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/5767\/7352\/files\/NTCNI012ER3-FAL-01.jpg?v=1786634128"},{"product_id":"nitron-elec-tron-r3-coilovers-vw-golf-mk7-r-4motion-13-20","title":"Nitron elec-TRON R3 Coilovers VW Golf Mk7 R 4motion 13-20","description":"\u003ch2\u003eNitron elec-TRON R3 Coilovers\u003c\/h2\u003e \u003cem\u003ePlease note: This kit uses the’s DNA electronic control system, so no additional products are required.\u003c\/em\u003e \u003cp\u003eThe elec-TRON R3 coilover kit combines the Nitron proportional solenoid valve with independent manual compression control. Designed for enthusiasts or professionals looking to further optimise their vehicle’s suspension performance for more extreme driving conditions and a higher level of performance. Piggyback or remotely mounted reservoirs allow quick and simple independent adjustment of high-speed and low-speed compression damping.\u003c\/p\u003e \u003cul\u003e \u003cli\u003e16 high-speed and 26 low-speed clicks, setting the baseline for the semi active system\u003c\/li\u003e \u003cli\u003eAdjustable top mounts and race springs\u003c\/li\u003e \u003cli\u003eRemote reservoirs for quick and simple compression adjustment\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e\u003cstrong\u003eTake the Next Step in Suspension Innovation\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eThe Nitron \u003cem\u003eelec-TRON\u003c\/em\u003e range is a fusion of world-renowned Nitron quality and attention to detail, combined with cutting-edge electronic valve technology. At the heart of the system is Nitron’s proportional solenoid valve, delivering unparalleled precision and control over the damping system. Each shock absorber in the \u003cem\u003eelec-TRON\u003c\/em\u003e system is equipped with an independent valve, allowing for individual damping control at each wheel. This is essential for optimising handling, stability and ride comfort.\u003c\/p\u003e \u003cp\u003eThe \u003cem\u003eelec-TRON\u003c\/em\u003e proportional valve operates within a range of 300-1800mA, providing a broad adjustment capability and a rapid response time of just 6 to 8 milliseconds from full hard to full soft. This system governs both compression and rebound damping. The valve is piston rod-mounted, fine-tuning the bleed characteristics of the shim stack, and is integrated with Nitron’s gas-pressurized mono-tube construction, ensuring maximum performance and reliability. This valve is compatible with both the R1 (electronic adjustment only) and the R3 (manual high and low-speed compression adjustment).\u003c\/p\u003e \u003cp\u003eIn the R3, the manual settings establish a baseline for the adjustments made by the main \u003cem\u003eelec-TRON\u003c\/em\u003e valve. The system can precisely adjust damping force based on a variety of factors such as g-load conditions, vehicle speed, road surface, and driver input. This results in highly accurate and responsive damping, significantly enhancing the overall performance of the vehicle.\u003c\/p\u003e \u003cp\u003eNote: Image used for illustration purposes only. Specific details, finishes and end fittings may differ from that shown.\u003cbr\u003e\u003c\/p\u003e \u003cp\u003eAll Nitron shocks are hand made to order to each individual customer's requirements. Lead times are normally 2 - 3 weeks, but at certain times may be slightly longer. If you would like a more accurate delivery time please contact us.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003ePlease note:\u003c\/strong\u003e this kit requires the Nitron Damper Control Unit (DCU) to operate.\u003c\/p\u003e","brand":"Nitron","offers":[{"title":"Default Title","offer_id":58532173709693,"sku":"NTCVW011ER3-MK7","price":7194.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/5767\/7352\/files\/NitronR3-1_3d0addca-2af5-4a48-a62a-9b1dd719d195.jpg?v=1786634128"},{"product_id":"nitron-elec-tron-r3-coilovers-toyota-gr-yaris-1-6-20-23","title":"Nitron elec-TRON R3 Coilovers Toyota GR Yaris 1.6 20-23","description":"\u003ch2\u003eNitron elec-TRON R3 Coilovers\u003c\/h2\u003e \u003cem\u003ePlease note: This kit uses the’s DNA electronic control system, so no additional products are required.\u003c\/em\u003e \u003cp\u003eThe elec-TRON R3 coilover kit combines the Nitron proportional solenoid valve with independent manual compression control. Designed for enthusiasts or professionals looking to further optimise their vehicle’s suspension performance for more extreme driving conditions and a higher level of performance. Piggyback or remotely mounted reservoirs allow quick and simple independent adjustment of high-speed and low-speed compression damping.\u003c\/p\u003e \u003cul\u003e \u003cli\u003e16 high-speed and 26 low-speed clicks, setting the baseline for the semi active system\u003c\/li\u003e \u003cli\u003eAdjustable top mounts and race springs\u003c\/li\u003e \u003cli\u003eRemote reservoirs for quick and simple compression adjustment\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e\u003cstrong\u003eTake the Next Step in Suspension Innovation\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eThe Nitron \u003cem\u003eelec-TRON\u003c\/em\u003e range is a fusion of world-renowned Nitron quality and attention to detail, combined with cutting-edge electronic valve technology. At the heart of the system is Nitron’s proportional solenoid valve, delivering unparalleled precision and control over the damping system. Each shock absorber in the \u003cem\u003eelec-TRON\u003c\/em\u003e system is equipped with an independent valve, allowing for individual damping control at each wheel. This is essential for optimising handling, stability and ride comfort.\u003c\/p\u003e \u003cp\u003eThe \u003cem\u003eelec-TRON\u003c\/em\u003e proportional valve operates within a range of 300-1800mA, providing a broad adjustment capability and a rapid response time of just 6 to 8 milliseconds from full hard to full soft. This system governs both compression and rebound damping. The valve is piston rod-mounted, fine-tuning the bleed characteristics of the shim stack, and is integrated with Nitron’s gas-pressurized mono-tube construction, ensuring maximum performance and reliability. This valve is compatible with both the R1 (electronic adjustment only) and the R3 (manual high and low-speed compression adjustment).\u003c\/p\u003e \u003cp\u003eIn the R3, the manual settings establish a baseline for the adjustments made by the main \u003cem\u003eelec-TRON\u003c\/em\u003e valve. The system can precisely adjust damping force based on a variety of factors such as g-load conditions, vehicle speed, road surface, and driver input. This results in highly accurate and responsive damping, significantly enhancing the overall performance of the vehicle.\u003c\/p\u003e \u003cp\u003eNote: Image used for illustration purposes only. Specific details, finishes and end fittings may differ from that shown.\u003cbr\u003e\u003c\/p\u003e \u003cp\u003eAll Nitron shocks are hand made to order to each individual customer's requirements. Lead times are normally 2 - 3 weeks, but at certain times may be slightly longer. If you would like a more accurate delivery time please contact us.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003ePlease note:\u003c\/strong\u003e this kit requires the Nitron Damper Control Unit (DCU) to operate.\u003c\/p\u003e","brand":"Nitron","offers":[{"title":"Default Title","offer_id":58532173742461,"sku":"NTCTO012ER3","price":8598.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/5767\/7352\/files\/NTCTO012ER3-01.jpg?v=1786634135"},{"product_id":"nitron-elec-tron-r3-coilovers-vw-golf-mk8-gti-19","title":"Nitron elec-TRON R3 Coilovers VW Golf Mk8 GTI 19+","description":"\u003ch2\u003eNitron elec-TRON R3 Coilovers\u003c\/h2\u003e \u003cem\u003ePlease note: This kit uses the’s DNA electronic control system, so no additional products are required.\u003c\/em\u003e \u003cp\u003eThe elec-TRON R3 coilover kit combines the Nitron proportional solenoid valve with independent manual compression control. Designed for enthusiasts or professionals looking to further optimise their vehicle’s suspension performance for more extreme driving conditions and a higher level of performance. Piggyback or remotely mounted reservoirs allow quick and simple independent adjustment of high-speed and low-speed compression damping.\u003c\/p\u003e \u003cul\u003e \u003cli\u003e16 high-speed and 26 low-speed clicks, setting the baseline for the semi active system\u003c\/li\u003e \u003cli\u003eAdjustable top mounts and race springs\u003c\/li\u003e \u003cli\u003eRemote reservoirs for quick and simple compression adjustment\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e\u003cstrong\u003eTake the Next Step in Suspension Innovation\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eThe Nitron \u003cem\u003eelec-TRON\u003c\/em\u003e range is a fusion of world-renowned Nitron quality and attention to detail, combined with cutting-edge electronic valve technology. At the heart of the system is Nitron’s proportional solenoid valve, delivering unparalleled precision and control over the damping system. Each shock absorber in the \u003cem\u003eelec-TRON\u003c\/em\u003e system is equipped with an independent valve, allowing for individual damping control at each wheel. This is essential for optimising handling, stability and ride comfort.\u003c\/p\u003e \u003cp\u003eThe \u003cem\u003eelec-TRON\u003c\/em\u003e proportional valve operates within a range of 300-1800mA, providing a broad adjustment capability and a rapid response time of just 6 to 8 milliseconds from full hard to full soft. This system governs both compression and rebound damping. The valve is piston rod-mounted, fine-tuning the bleed characteristics of the shim stack, and is integrated with Nitron’s gas-pressurized mono-tube construction, ensuring maximum performance and reliability. This valve is compatible with both the R1 (electronic adjustment only) and the R3 (manual high and low-speed compression adjustment).\u003c\/p\u003e \u003cp\u003eIn the R3, the manual settings establish a baseline for the adjustments made by the main \u003cem\u003eelec-TRON\u003c\/em\u003e valve. The system can precisely adjust damping force based on a variety of factors such as g-load conditions, vehicle speed, road surface, and driver input. This results in highly accurate and responsive damping, significantly enhancing the overall performance of the vehicle.\u003c\/p\u003e \u003cp\u003eNote: Image used for illustration purposes only. Specific details, finishes and end fittings may differ from that shown.\u003cbr\u003e\u003c\/p\u003e \u003cp\u003eAll Nitron shocks are hand made to order to each individual customer's requirements. Lead times are normally 2 - 3 weeks, but at certain times may be slightly longer. If you would like a more accurate delivery time please contact us.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003ePlease note:\u003c\/strong\u003e this kit requires the Nitron Damper Control Unit (DCU) to operate.\u003c\/p\u003e","brand":"Nitron","offers":[{"title":"Default Title","offer_id":58532173775229,"sku":"NTCVW010ER3","price":7194.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/5767\/7352\/files\/NitronR3-1_98cabe4a-7dc3-4151-b83b-fc80f0f006bb.jpg?v=1786634128"},{"product_id":"nitron-elec-tron-r3-coilovers-toyota-supra-a90-19","title":"Nitron elec-TRON R3 Coilovers Toyota Supra A90 19+","description":"\u003ch2\u003eNitron elec-TRON R3 Coilovers\u003c\/h2\u003e \u003cem\u003ePlease note: This kit uses the’s DNA electronic control system, so no additional products are required.\u003c\/em\u003e \u003cp\u003eThe elec-TRON R3 coilover kit combines the Nitron proportional solenoid valve with independent manual compression control. Designed for enthusiasts or professionals looking to further optimise their vehicle’s suspension performance for more extreme driving conditions and a higher level of performance. Piggyback or remotely mounted reservoirs allow quick and simple independent adjustment of high-speed and low-speed compression damping.\u003c\/p\u003e \u003cul\u003e \u003cli\u003e16 high-speed and 26 low-speed clicks, setting the baseline for the semi active system\u003c\/li\u003e \u003cli\u003eAdjustable top mounts and race springs\u003c\/li\u003e \u003cli\u003eRemote reservoirs for quick and simple compression adjustment\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e\u003cstrong\u003eTake the Next Step in Suspension Innovation\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eThe Nitron \u003cem\u003eelec-TRON\u003c\/em\u003e range is a fusion of world-renowned Nitron quality and attention to detail, combined with cutting-edge electronic valve technology. At the heart of the system is Nitron’s proportional solenoid valve, delivering unparalleled precision and control over the damping system. Each shock absorber in the \u003cem\u003eelec-TRON\u003c\/em\u003e system is equipped with an independent valve, allowing for individual damping control at each wheel. This is essential for optimising handling, stability and ride comfort.\u003c\/p\u003e \u003cp\u003eThe \u003cem\u003eelec-TRON\u003c\/em\u003e proportional valve operates within a range of 300-1800mA, providing a broad adjustment capability and a rapid response time of just 6 to 8 milliseconds from full hard to full soft. This system governs both compression and rebound damping. The valve is piston rod-mounted, fine-tuning the bleed characteristics of the shim stack, and is integrated with Nitron’s gas-pressurized mono-tube construction, ensuring maximum performance and reliability. This valve is compatible with both the R1 (electronic adjustment only) and the R3 (manual high and low-speed compression adjustment).\u003c\/p\u003e \u003cp\u003eIn the R3, the manual settings establish a baseline for the adjustments made by the main \u003cem\u003eelec-TRON\u003c\/em\u003e valve. The system can precisely adjust damping force based on a variety of factors such as g-load conditions, vehicle speed, road surface, and driver input. This results in highly accurate and responsive damping, significantly enhancing the overall performance of the vehicle.\u003c\/p\u003e \u003cp\u003eNote: Image used for illustration purposes only. Specific details, finishes and end fittings may differ from that shown.\u003cbr\u003e\u003c\/p\u003e \u003cp\u003eAll Nitron shocks are hand made to order to each individual customer's requirements. Lead times are normally 2 - 3 weeks, but at certain times may be slightly longer. If you would like a more accurate delivery time please contact us.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003ePlease note:\u003c\/strong\u003e this kit requires the Nitron Damper Control Unit (DCU) to operate.\u003c\/p\u003e","brand":"Nitron","offers":[{"title":"Road","offer_id":58532173807997,"sku":"NTCTO013ER3FRS","price":9072.0,"currency_code":"GBP","in_stock":true},{"title":"Track","offer_id":58532173840765,"sku":"NTCTO013ER3TDS","price":9072.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/5767\/7352\/files\/NitronR3-1_9ec6a3af-1cdb-4719-8964-23c08fd49061.jpg?v=1786634134"},{"product_id":"nitron-elec-tron-r3-coilovers-porsche-911-gt3-991-11-20","title":"Nitron elec-TRON R3 Coilovers Porsche 911 GT3 991 11-20","description":"\u003ch2\u003eNitron elec-TRON R3 Coilovers\u003c\/h2\u003e \u003cem\u003ePlease note: This kit uses the’s DNA electronic control system, so no additional products are required.\u003c\/em\u003e \u003cp\u003eThe elec-TRON R3 coilover kit combines the Nitron proportional solenoid valve with independent manual compression control. Designed for enthusiasts or professionals looking to further optimise their vehicle’s suspension performance for more extreme driving conditions and a higher level of performance. Piggyback or remotely mounted reservoirs allow quick and simple independent adjustment of high-speed and low-speed compression damping.\u003c\/p\u003e \u003cul\u003e \u003cli\u003e16 high-speed and 26 low-speed clicks, setting the baseline for the semi active system\u003c\/li\u003e \u003cli\u003eAdjustable top mounts and race springs\u003c\/li\u003e \u003cli\u003eRemote reservoirs for quick and simple compression adjustment\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e\u003cstrong\u003eTake the Next Step in Suspension Innovation\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eThe Nitron \u003cem\u003eelec-TRON\u003c\/em\u003e range is a fusion of world-renowned Nitron quality and attention to detail, combined with cutting-edge electronic valve technology. At the heart of the system is Nitron’s proportional solenoid valve, delivering unparalleled precision and control over the damping system. Each shock absorber in the \u003cem\u003eelec-TRON\u003c\/em\u003e system is equipped with an independent valve, allowing for individual damping control at each wheel. This is essential for optimising handling, stability and ride comfort.\u003c\/p\u003e \u003cp\u003eThe \u003cem\u003eelec-TRON\u003c\/em\u003e proportional valve operates within a range of 300-1800mA, providing a broad adjustment capability and a rapid response time of just 6 to 8 milliseconds from full hard to full soft. This system governs both compression and rebound damping. The valve is piston rod-mounted, fine-tuning the bleed characteristics of the shim stack, and is integrated with Nitron’s gas-pressurized mono-tube construction, ensuring maximum performance and reliability. This valve is compatible with both the R1 (electronic adjustment only) and the R3 (manual high and low-speed compression adjustment).\u003c\/p\u003e \u003cp\u003eIn the R3, the manual settings establish a baseline for the adjustments made by the main \u003cem\u003eelec-TRON\u003c\/em\u003e valve. The system can precisely adjust damping force based on a variety of factors such as g-load conditions, vehicle speed, road surface, and driver input. This results in highly accurate and responsive damping, significantly enhancing the overall performance of the vehicle.\u003c\/p\u003e \u003cp\u003eNote: Image used for illustration purposes only. Specific details, finishes and end fittings may differ from that shown.\u003cbr\u003e\u003c\/p\u003e \u003cp\u003eAll Nitron shocks are hand made to order to each individual customer's requirements. Lead times are normally 2 - 3 weeks, but at certain times may be slightly longer. If you would like a more accurate delivery time please contact us.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003ePlease note:\u003c\/strong\u003e this kit requires the Nitron Damper Control Unit (DCU) to operate.\u003c\/p\u003e","brand":"Nitron","offers":[{"title":"Default Title","offer_id":58532173906301,"sku":"NTCPO024ER3","price":7890.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/5767\/7352\/files\/NTCPO024ER3-01.jpg?v=1786634128"},{"product_id":"nitron-elec-tron-r3-coilovers-porsche-911-carrera-996-97-05-with-standalone-fal","title":"Nitron elec-TRON R3 Coilovers Porsche 911 Carrera 996 97-05 With Standalone FAL","description":"\u003ch2\u003eNitron elec-TRON R3 Coilovers\u003c\/h2\u003e \u003cem\u003ePlease note: This kit uses the’s DNA electronic control system, so no additional products are required.\u003c\/em\u003e \u003cp\u003eThe elec-TRON R3 coilover kit combines the Nitron proportional solenoid valve with independent manual compression control. Designed for enthusiasts or professionals looking to further optimise their vehicle’s suspension performance for more extreme driving conditions and a higher level of performance. Piggyback or remotely mounted reservoirs allow quick and simple independent adjustment of high-speed and low-speed compression damping.\u003c\/p\u003e \u003cul\u003e \u003cli\u003e16 high-speed and 26 low-speed clicks, setting the baseline for the semi active system\u003c\/li\u003e \u003cli\u003eAdjustable top mounts and race springs\u003c\/li\u003e \u003cli\u003eRemote reservoirs for quick and simple compression adjustment\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e\u003cstrong\u003eTake the Next Step in Suspension Innovation\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eThe Nitron \u003cem\u003eelec-TRON\u003c\/em\u003e range is a fusion of world-renowned Nitron quality and attention to detail, combined with cutting-edge electronic valve technology. At the heart of the system is Nitron’s proportional solenoid valve, delivering unparalleled precision and control over the damping system. Each shock absorber in the \u003cem\u003eelec-TRON\u003c\/em\u003e system is equipped with an independent valve, allowing for individual damping control at each wheel. This is essential for optimising handling, stability and ride comfort.\u003c\/p\u003e \u003cp\u003eThe \u003cem\u003eelec-TRON\u003c\/em\u003e proportional valve operates within a range of 300-1800mA, providing a broad adjustment capability and a rapid response time of just 6 to 8 milliseconds from full hard to full soft. This system governs both compression and rebound damping. The valve is piston rod-mounted, fine-tuning the bleed characteristics of the shim stack, and is integrated with Nitron’s gas-pressurized mono-tube construction, ensuring maximum performance and reliability. This valve is compatible with both the R1 (electronic adjustment only) and the R3 (manual high and low-speed compression adjustment).\u003c\/p\u003e \u003cp\u003eIn the R3, the manual settings establish a baseline for the adjustments made by the main \u003cem\u003eelec-TRON\u003c\/em\u003e valve. The system can precisely adjust damping force based on a variety of factors such as g-load conditions, vehicle speed, road surface, and driver input. This results in highly accurate and responsive damping, significantly enhancing the overall performance of the vehicle.\u003c\/p\u003e \u003cp\u003eNote: Image used for illustration purposes only. Specific details, finishes and end fittings may differ from that shown.\u003cbr\u003e\u003c\/p\u003e \u003cp\u003eAll Nitron shocks are hand made to order to each individual customer's requirements. Lead times are normally 2 - 3 weeks, but at certain times may be slightly longer. If you would like a more accurate delivery time please contact us.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003ePlease note:\u003c\/strong\u003e this kit requires the Nitron Damper Control Unit (DCU) to operate.\u003c\/p\u003e\u003ch3\u003eFront Axle Lift (FAL)\u003c\/h3\u003e\u003cp\u003eThis kit is supplied with the Nitron standalone Front Axle Lift system, letting you raise the front axle to clear speed bumps, ramps and steep driveways without affecting damping performance.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKey features:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eKit contains all components – lift cylinders, hydraulic lines, pump, mounting bracket, wiring loom and controller\u003c\/li\u003e\n\u003cli\u003e250W pump, typical lift time under 3 seconds\u003c\/li\u003e\n\u003cli\u003eAudible in-cabin warning system and switch with built-in warning light\u003c\/li\u003e\n\u003cli\u003eAuto-off function\u003c\/li\u003e\n\u003cli\u003eLift height varies by application – see the specification table below\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Nitron","offers":[{"title":"Default Title","offer_id":58532174004605,"sku":"NTCPO021ER3+FAL-911996CARRERA","price":11166.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/5767\/7352\/files\/NTCPO021ER3-FAL-01_a0188e01-25eb-49a8-a3f0-f553e11047a5.jpg?v=1786634130"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/5767\/7352\/collections\/NITRON_331ca0f1-ab32-4464-ad57-67ec03524470.jpg?v=1786618290","url":"https:\/\/www.tegiwa.com\/collections\/nitron-r3-coilovers-3-way-independently-adjustable-race-suspension.oembed","provider":"Tegiwa","version":"1.0","type":"link"}