{"title":"Mitsubishi 3000GT GTO Gearbox, Differential, Clutch, Flywheel \u0026 Drivetrain Upgrades","description":null,"products":[{"product_id":"exedy-single-series-stage-1-organic-clutch-mitsubishi-300gt-z16a-90","title":"Exedy Single Series Stage 1 Organic Clutch Mitsubishi 300GT Z16A 90+","description":"\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePartNo: \u003c\/strong\u003eMK06H835\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePartNoDesc: \u003c\/strong\u003eStage 1 Organic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOuter Diameter (mm): \u003c\/strong\u003e250\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupplementary Article Info: \u003c\/strong\u003eWith bearing(s)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDisc Facing: \u003c\/strong\u003eOrganic\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003ePull Type: \u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePush Type: \u003c\/strong\u003eYes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSprung Centre Disc?: \u003c\/strong\u003eYes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTorque @ Flywheel: \u003c\/strong\u003e370 lb.ft.\/500 Nm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTorque @ Wheels: \u003c\/strong\u003e300 lb.ft.\/400 Nm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eClamp Load (N): \u003c\/strong\u003e12260\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eNumber of Paddles: \u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003ePrecision, strength and incomparable quality.\u003c\/p\u003e\n\u003cp\u003eDesigned for lightly modified vehicles, the Stage 1 Organic clutch incorporates friction material with high heat-resistance properties and high strength fibres making it an ideal clutch for road, circuit or drifting.\u003c\/p\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cp\u003e\u003cstrong\u003eMain Benefits\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eEnsures the clutch engagement feeling is the same as the standard clutch.\u003c\/li\u003e\n\u003cli\u003eUp to a 30% increase in torque capacity over standard.\u003c\/li\u003e\n\u003cli\u003eApproximately 40% higher clamp load than the standard clutch.\u003c\/li\u003e\n\u003cli\u003eIndustry leading performance friction, achieving the highest fade recovery, the highest RPM burst test results, the best heat resistance and the lowest wear rate in the performance aftermarket.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cp\u003e\u003cstrong\u003eSuitable For\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRoad\u003c\/li\u003e\n\u003cli\u003eTrack Day\u003c\/li\u003e\n\u003cli\u003eCircuit Racing\u003c\/li\u003e\n\u003cli\u003eDrifting\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cp\u003e\u003cstrong\u003eClutch Cover\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eSingle Series clutch covers are designed to achieve a clamping load that is approximately 40% higher than the genuine part enabling a higher torque capacity. Ductile material is used for all pressure plates and high burst strength can be achieved in all temperature ranges.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e Single Series Clutch Kits with \u003cstrong\u003eHD\u003c\/strong\u003e in the middle of a kit reference denote that the cover has a higher clamp load. e.g. Mitsubishi EVO Organic kit: MK04\u003cstrong\u003eHD\u003c\/strong\u003e601\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eClutch Disc\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eAn ultra fibre friction facing is used which has high heat resistance and high burst strength characteristics. No steel back is required which can cause RPM \"lock-out\" and\/or synchro damage. Superior in shift operations and half-engagement feel, this clutch disc is recommended for any motorsport or modified vehicle use.\u003c\/p\u003e\n\u003cp\u003eThe performance of a standard organic friction material usually suffers after slipping. Accordingly, EXEDY has developed the ultra fibre material. If fade is experienced it will recover after a short cooling down period.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e There are two variations of Organic kits for some models. For example, the Organic kit FK01H601 for the Subaru Impreza has a 6 spring disc and the kit FK01H\u003cstrong\u003e1\u003c\/strong\u003e601 has a 4 spring disc. The 6 spring disc is best suited for track day or motorsport use, whereas the 4 spring disc is ideal for everyday driving as it delivers a smooth engagement and disengagement experience.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Exedy","offers":[{"title":"Default Title","offer_id":47247545565480,"sku":"MK06H835","price":497.42,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/5767\/7352\/files\/exedy-single-series-stage-1-organic-clutch-mitsubishi-300gt-z16a-90-flywheel-386.webp?v=1741266275"},{"product_id":"exedy-single-series-stage-2-sports-clutch-mitsubishi-300gt-z16a-90","title":"Exedy Single Series Stage 2 Sports Clutch Mitsubishi 300GT Z16A 90+","description":"\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePartNo: \u003c\/strong\u003eMK06T835\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePartNoDesc: \u003c\/strong\u003eStage 2 Sports\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOuter Diameter (mm): \u003c\/strong\u003e250\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupplementary Article Info: \u003c\/strong\u003eWith bearing(s)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDisc Facing: \u003c\/strong\u003eCerametallic\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003ePull Type: \u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePush Type: \u003c\/strong\u003eYes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSprung Centre Disc?: \u003c\/strong\u003eYes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTorque @ Flywheel: \u003c\/strong\u003e460 lb.ft.\/620 Nm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTorque @ Wheels: \u003c\/strong\u003e370 lb.ft.\/500 Nm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eClamp Load (N): \u003c\/strong\u003e12260\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Paddles: \u003c\/strong\u003e8\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003eEXEDY Stage 2 Sports clutch kits are designed to handle the abuse of high power modified engines whist retaining adequate driveability. The cerametallic friction material can handle much more abuse than stock type disc assemblies without slipping or fading. All EXEDY Stage 2 cerametallic clutch discs have sprung center dampers to reduce the impact and shock loads transmitted through the drivetrain.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMain Benefits\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eA reduction of 10% inertia over the original equipment part.\u003c\/li\u003e\n\u003cli\u003eUp to a 40% increase in torque capacity over standard.\u003c\/li\u003e\n\u003cli\u003eApproximately 40% higher clamp load than the standard clutch.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSuitable For\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRoad\u003c\/li\u003e\n\u003cli\u003eTrack Day\u003c\/li\u003e\n\u003cli\u003eCircuit Racing\u003c\/li\u003e\n\u003cli\u003eTime Attack\u003c\/li\u003e\n\u003cli\u003eDrifting\u003c\/li\u003e\n\u003cli\u003eDrag Racing\u003c\/li\u003e\n\u003cli\u003eRally\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eClutch Cover\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eSingle Series clutch covers are designed to achieve a clamping load that is approximately 40% higher than the genuine part enabling a higher torque capacity. Ductile material is used for all pressure plates and high burst strength can be achieved in all temperature ranges.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e Single Series Clutch Kits with \u003cstrong\u003eHD\u003c\/strong\u003e in the middle of a kit reference denote that the cover has a higher clamp load. e.g. Mitsubishi EVO Organic kit: MK04\u003cstrong\u003eHD\u003c\/strong\u003e601\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eClutch Disc\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eManufactured using a unique metallic configuration and low density metallic material, T5001 Carbonrich, S-Type cerametallic discs are designed to be light weight; inertia is 10% lower than the genuine part. Stage 2 Sports discs have excellent heat dissipation characteristics.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote: \u003c\/strong\u003eThere are two variations of S-Type kits for some models. For example, the kit FK01T601 has a 3 paddle disc whereas the kit FK01T\u003cstrong\u003e1\u003c\/strong\u003e601 has a 4 paddle disc. In comparison the 4 paddle disc provides a reduced pedal effort, whereas the lighter 3 paddle disc allows for a quicker shifting response.\u003c\/p\u003e","brand":"Exedy","offers":[{"title":"Default Title","offer_id":47247545598248,"sku":"MK06T835","price":667.97,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/5767\/7352\/files\/exedy-single-series-stage-2-sports-clutch-mitsubishi-300gt-z16a-90-flywheel-806.webp?v=1744974393"},{"product_id":"ngk-spark-plugs-mitsubishi-3000gt-92-95-x6","title":"NGK Spark Plugs Mitsubishi 3000GT 92-95 x6","description":"\u003cp\u003e\u003cstrong\u003eNGK Spark Plugs Mitsubishi 3000GT 92-95 x6\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eNGK Spark Plugs are one of the leading automotive and technical ceramic suppliers in the world.\u003cbr\u003e\nFounded in 1936, NGK Spark Plugs have always developed ceramics at the core of its business.\u003c\/p\u003e\n\n\u003cp\u003eOver the years, the company has successfully developed and applied its expertise to create other products of significant value.\u003c\/p\u003e\n\n\u003cp\u003eWith over 80 years of experience, NGK Spark Plugs is a global market leader of spark plugs, glow plugs, lambda sensors as well as other ignition parts and vehicle electronics.\u003c\/p\u003e\n\n\u003cp\u003eHeadquartered in Nagoya, Japan, NGK Spark Plugs have production facilities and sales organisations all around the world with more than 14,500 employees worldwide.\u003c\/p\u003e\n\n\u003cp\u003eNGK Spark Plugs are present on all continents and have 41 group companies, 24 production plants, and five technical centres.\u003c\/p\u003e\n\n\u003cp\u003eThis worldwide presence makes NGK Spark Plugs a global leader and first choice for spark plugs.\u003c\/p\u003e\n\n\u003cp\u003e \u003c\/p\u003e","brand":"NGK","offers":[{"title":"Platinum (OEM)","offer_id":47253190803752,"sku":"NGK-PFR6J-11-6","price":96.6,"currency_code":"GBP","in_stock":true},{"title":"Iridium (Upgraded)","offer_id":47253190836520,"sku":"NGK-IFR6J11-6","price":111.6,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/5767\/7352\/files\/ngk-spark-plugs-mitsubishi-3000gt-92-95-x6-coilpacks-leads-772.webp?v=1744977373"},{"product_id":"hel-braided-brake-lines-mitsubishi-3000-gt-gto-92-99","title":"HEL Braided Brake Lines Mitsubishi 3000 GT GTO 92-99","description":"\u003cp\u003e\u003cstrong\u003eIMAGES ARE FOR ILLUSTRATIVE PURPOSES ONLY\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eHEL Brake Lines eliminate the risk of unreliable brakes, giving you premium quality brake performance at the same time. Incredible value for money for premium quality braided brake lines. These are braided brake lines you can 100% trust in any type of car. Your braking will feel smoother and stronger. That ‘spongy’ brake feeling will be eliminated, making your brakes crisp and responsive. \u003cbr\u003e\u003cbr\u003e- The highest quality, 100% stainless steel, non-corroding braided brake lines.\u003cbr\u003e- Covered With A Lifetime Warranty As Standard.\u003cbr\u003e- FMVSS-106, ADR, LTSA, DOT and TUV approved.\u003cbr\u003e- So reliable that they’re used in many high performance, racing and custom cars.\u003cbr\u003e- Coated in a wipe-clean PVC cover.\u003c\/p\u003e","brand":"HEL","offers":[{"title":"Default Title","offer_id":47264145735976,"sku":"HEL-MIT-8-104","price":239.21,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/5767\/7352\/files\/hel-braided-brake-lines-mitsubishi-3000-gt-gto-92-99-975.webp?v=1745011959"},{"product_id":"mishimoto-performance-aluminum-fan-shroud-kit-mitsubishi-3000gt-91-99","title":"Mishimoto Performance Aluminum Fan Shroud Kit Mitsubishi 3000GT 91-99","description":"\u003cp\u003eThe aluminum fan shroud kit will considerably improve engine cooling functions and the overall performance of your vehicle.All Mishimoto fan shrouds are significantly lighter than standard fan shrouds.The longevity of your engine depends on keeping your engine running cool, especially during those unbearably hot days.A Mishimoto fan shroud will notably improve engine cooling performance by delivering more air to the aluminum radiator and driving out excess heat.The fan shroud serves another very important purpose: It'secures the fan blades, preventing potential damage to other essential engine components.\u003c\/p\u003e","brand":"Mishimoto","offers":[{"title":"Default Title","offer_id":47317004091688,"sku":"MMFS-3KGT-91","price":212.4,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/5767\/7352\/files\/mishimoto-performance-aluminum-fan-shroud-kit-mitsubishi-3000gt-91-99-fans-305.webp?v=1750341465"},{"product_id":"mishimoto-silicone-hose-kit-mitsubishi-3000gt-dodge-stealth-91-96","title":"Mishimoto Silicone Hose Kit Mitsubishi 3000GT Dodge Stealth 91-96","description":"\u003cp\u003eThe Mishimoto Mitsubishi 3000GT 1991-1999 \/ Dodge Stealth 1991-1996 Silicone Hose Kits are made with a dual layer combining high grade silicone and heat-resistant embedded fibers to provide efficient heat reduction and increased pressure tolerance, all with designed and engineered for a direct OEM fit.The perfect replacement to the stock 3000GT and Stealth hoses! Fits both turbo and non-turbo applications.\u003c\/p\u003e","brand":"Mishimoto","offers":[{"title":"Black","offer_id":47317020967208,"sku":"MMHOSE-3KGT-91BK","price":112.8,"currency_code":"GBP","in_stock":true},{"title":"Blue","offer_id":47317020999976,"sku":"MMHOSE-3KGT-91BL","price":112.8,"currency_code":"GBP","in_stock":false},{"title":"Red","offer_id":47317021032744,"sku":"MMHOSE-3KGT-91RD","price":112.8,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/5767\/7352\/files\/mishimoto-silicone-hose-kit-mitsubishi-3000gt-dodge-stealth-91-96-kits-878.webp?v=1749572777"},{"product_id":"mishimoto-hoonigan-oil-filler-cap-mitsubishi","title":"Mishimoto Hoonigan Oil Filler Cap Mitsubishi","description":"\u003cp\u003eRegardless of what you drive, we know you care about your car's style ? That's why We've teamed up with Hoonigan to release a limited edition billet aluminum oil filler cap, complete with a matching bottle opener\/multi-tool keychain to complete the package. Whether you drift, autocross, air-out at the local Cars and Coffee, or just daydream about these things while commuting to work in your 1999 Camry, we had you in mind when we engineered this cap. This is the quintessential gearheads? toolkit our goal is to provide you with the means to get out there and thrash tires while your engine bay endlessly drips not oil - but style ? in your wake, and then crack a brew once you're off course and ready to party. For those of you who may not be familiar, Hoonigan is an automotive culture powerhouse from their team of professional drivers to their featured vehicles, awesome swag, and ridiculously wild videos, Hoonigan covers all the bases when it comes to having fun in cars and looking good doing it.The Mishimoto\/Hoonigan Oil Cap and Bottle Opener Combo Pack is available in your choice of anodized Gunmetal or anodized Red, includes one oil cap and one bottle opener, and each kit comes standard with the Mishimoto Lifetime Warranty.\u003c\/p\u003e","brand":"Mishimoto","offers":[{"title":"Red","offer_id":47317146632488,"sku":"MMOFC-MITS-HOONRD","price":69.65,"currency_code":"GBP","in_stock":true},{"title":"Silver","offer_id":47317146698024,"sku":"MMOFC-MITS-HOONSL","price":69.68,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/5767\/7352\/files\/mishimoto-hoonigan-oil-filler-cap-mitsubishi-engine-bay-774.webp?v=1745111815"},{"product_id":"mishimoto-oil-filler-cap-mitsubishi","title":"Mishimoto Oil Filler Cap Mitsubishi","description":"\u003cp\u003eAdd function and style to your engine bay with a Mishimoto CNC billet Oil Filler Cap.Available in Black and Red, this item is a great compliment to any engine bay.The included O-Ring ensures a tight seal and the Mishimoto name on the top shows everyone who peeks under the hood that only the best in quality go on your car.This cap fits most Mitsubishi engines, see tech specs for more info.\u003c\/p\u003e","brand":"Mishimoto","offers":[{"title":"Black","offer_id":47317147975976,"sku":"MMOFC-MITS-BK","price":48.0,"currency_code":"GBP","in_stock":true},{"title":"Red","offer_id":47317148008744,"sku":"MMOFC-MITS-RD","price":57.5,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/5767\/7352\/files\/mishimoto-oil-filler-cap-mitsubishi-engine-bay-356.webp?v=1749573612"},{"product_id":"mishimoto-performance-aluminum-radiator-mitsubishi-3000gt-91-99","title":"Mishimoto Performance Aluminum Radiator Mitsubishi 3000GT 91-99","description":"\u003cp\u003eWhether you take your car to the track or use it as a daily driver, an upgraded cooling system is essential in maintaining a well balanced efficiently running engine.The performance aluminum radiator is the ideal upgrade to the stock radiator especially for those looking to enhance the overall performance and lifetime of their engine.With a direct OEM fit installation is effortless, no cutting or modification is required.All Mishimoto radiators are designed and engineered to maximize cooling efficiency and most importantly protect your vehicle from overheating.Fits the Dodge Stealth and Mitsubishi 3000GT.\u003c\/p\u003e","brand":"Mishimoto","offers":[{"title":"Default Title","offer_id":47317154365736,"sku":"MMRAD-3KGT-91","price":297.6,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/5767\/7352\/files\/mishimoto-performance-aluminum-radiator-mitsubishi-3000gt-91-99-radiators-317.webp?v=1750344337"},{"product_id":"synchrotech-carbon-synchro-getrag-mitsubishi-3000gt","title":"Synchrotech Carbon Synchro Getrag Mitsubishi 3000GT","description":"\u003cp\u003eImprove shifting response with the MFactory R\u0026amp;D (Synchrotech®) Carbon-Composite Synchros.\u003cbr\u003e\u003cbr\u003eUtilizing a carbon-carbon lining technology initially developed for the Aerospace Industry which acts as braking material during gear engagement, this allows for quicker and more precise shifting and prolongs the life of your gear set. Unlike our competition, we \u003cu\u003eDO NOT\u003c\/u\u003e use a spray coating (which wears out quickly) nor a carbon fiber weave (the same stuff used on your Carbon Hood which was not designed for friction!)\u003cbr\u003e\u003cbr\u003eAfter several years of Research \u0026amp; Development on our championship winning race cars, we are proud to offer \u003cem\u003eTHE\u003c\/em\u003e most technologically advanced Synchros on the market.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSynchros are made from high strength Japanese brass\u003c\/li\u003e\n\u003cli\u003eSynchros are Carbon-Carbon Lined for increased performance and durability\u003c\/li\u003e\n\u003cli\u003e100% larger surface contact area for increase performance\u003c\/li\u003e\n\u003cli\u003eMore aggressive lock angle for effortless high rpm shifting\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Synchrotech","offers":[{"title":"6 Speed 5th or 6th \/ 5 Speed 3rd or 4th","offer_id":47317797503272,"sku":"SYN-3S-5-1","price":73.11,"currency_code":"GBP","in_stock":true},{"title":"6 Speed 3rd or 4th","offer_id":47317797536040,"sku":"SYN3S-3-1","price":73.11,"currency_code":"GBP","in_stock":true},{"title":"6 Speed 1st-6th","offer_id":47317797568808,"sku":"SYN-3SC-1","price":438.63,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/5767\/7352\/files\/synchrotech-carbon-synchro-getrag-mitsubishi-3000gt-6-speed-5th-or-6th-5-3rd-4th-synchros-rebuild-kits-559.webp?v=1745123648"},{"product_id":"tein-flex-z-coilovers-mitsubishi-3000gt-z16a-91-99","title":"Tein Flex Z Coilovers Mitsubishi 3000GT Z16A 91-99","description":"\u003cp\u003eThe Tein Flex-Z range are incredible, height adjustable coilovers made with excellent built quality at an affordable price. Considering the use of larger tires\/wheels and the lowered ride height, FLEX Z uses twin-tube system, in pursuit of ride comfort on streets. In order to maintain the ride quality on streets with rough spots here and there, a shock absorber has to have sufficient stroke, be low-frictional and move smoothly. As an oil chamber and a gas chamber are not arranged serially in a twin-tube system, it is easy to secure enough stroke. Also, low gas pressure keeps friction low. Its smooth stroke movement makes it possible to follow rough and bumpy road surfaces quite well, offering supple ride at low speed and stable ride at high speed.\u003c\/p\u003e\n\u003cp\u003eFLEX Z also has the ever-popular 16-level damping force adjustment (comp.\/rebound together) feature with the use of needle valve. By turning the adjustment knob, damping force (stiffness) is adjusted linearly step by step, to change the ride and handling of the car to suit driver's needs\/preferences.\u003cbr\u003eUse of well-reputed \"ADVANCE Needle\" at the needle valve for oil flow control secures sufficient damping force adjustable range.\u003cbr\u003eWhether it's for the handling characteristics of sport driving or for the ride quality according to numbers of passengers, finding the most desirable setting is easier than ever.\u003c\/p\u003e\n\u003cp\u003eFlex-Z features:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eIncredibly Low Price\u003c\/li\u003e\n\u003cli\u003eTwin-Tube System for Comfortable Ride on Streets\u003c\/li\u003e\n\u003cli\u003eFull-Length System for Ride Height Adjustment with Minimal Change in Ride\u003c\/li\u003e\n\u003cli\u003eDamping Force Adjustable to Change Ride to Desired Settings\u003c\/li\u003e\n\u003cli\u003eCompatible with EDFC Series to enable In-Car Damping Force Adjustment\u003c\/li\u003e\n\u003cli\u003eUpper Mounts Included for Easy Installation\u003c\/li\u003e\n\u003cli\u003eHighly Durable \u0026amp; Reliable\u003c\/li\u003e\n\u003cli\u003eHighly-Rigid Bracket \u0026amp; Shell Case\u003c\/li\u003e\n\u003cli\u003eSmooth Ride Height Adjustment \u0026amp; One-of-A-Kind Adjusting Wrench\u003c\/li\u003e\n\u003cli\u003eSag-resistant Springs\u003c\/li\u003e\n\u003cli\u003eHigh-Spec Damper Oil\u003c\/li\u003e\n\u003cli\u003eReplacement Service available to Bring Used Shock Absorbers Back to Life\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Tein","offers":[{"title":"Default Title","offer_id":47327781028136,"sku":"TEIN-VSR74-C1SA4","price":1080.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/5767\/7352\/files\/tein-flex-z-coilovers-mitsubishi-3000gt-z16a-91-99-572.webp?v=1745220485"},{"product_id":"tein-flex-z-coilovers-mitsubishi-gto-z15a-93-00","title":"Tein Flex Z Coilovers Mitsubishi GTO Z15A 93-00","description":"\u003cp\u003eThe Tein Flex-Z range are incredible, height adjustable coilovers made with excellent built quality at an affordable price. Considering the use of larger tires\/wheels and the lowered ride height, FLEX Z uses twin-tube system, in pursuit of ride comfort on streets. In order to maintain the ride quality on streets with rough spots here and there, a shock absorber has to have sufficient stroke, be low-frictional and move smoothly. As an oil chamber and a gas chamber are not arranged serially in a twin-tube system, it is easy to secure enough stroke. Also, low gas pressure keeps friction low. Its smooth stroke movement makes it possible to follow rough and bumpy road surfaces quite well, offering supple ride at low speed and stable ride at high speed.\u003c\/p\u003e\n\u003cp\u003eFLEX Z also has the ever-popular 16-level damping force adjustment (comp.\/rebound together) feature with the use of needle valve. By turning the adjustment knob, damping force (stiffness) is adjusted linearly step by step, to change the ride and handling of the car to suit driver's needs\/preferences.\u003cbr\u003eUse of well-reputed \"ADVANCE Needle\" at the needle valve for oil flow control secures sufficient damping force adjustable range.\u003cbr\u003eWhether it's for the handling characteristics of sport driving or for the ride quality according to numbers of passengers, finding the most desirable setting is easier than ever.\u003c\/p\u003e\n\u003cp\u003eFlex-Z features:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eIncredibly Low Price\u003c\/li\u003e\n\u003cli\u003eTwin-Tube System for Comfortable Ride on Streets\u003c\/li\u003e\n\u003cli\u003eFull-Length System for Ride Height Adjustment with Minimal Change in Ride\u003c\/li\u003e\n\u003cli\u003eDamping Force Adjustable to Change Ride to Desired Settings\u003c\/li\u003e\n\u003cli\u003eCompatible with EDFC Series to enable In-Car Damping Force Adjustment\u003c\/li\u003e\n\u003cli\u003eUpper Mounts Included for Easy Installation\u003c\/li\u003e\n\u003cli\u003eHighly Durable \u0026amp; Reliable\u003c\/li\u003e\n\u003cli\u003eHighly-Rigid Bracket \u0026amp; Shell Case\u003c\/li\u003e\n\u003cli\u003eSmooth Ride Height Adjustment \u0026amp; One-of-A-Kind Adjusting Wrench\u003c\/li\u003e\n\u003cli\u003eSag-resistant Springs\u003c\/li\u003e\n\u003cli\u003eHigh-Spec Damper Oil\u003c\/li\u003e\n\u003cli\u003eReplacement Service available to Bring Used Shock Absorbers Back to Life\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Tein","offers":[{"title":"Default Title","offer_id":47327781060904,"sku":"TEIN-VSR74-C1SA4","price":1080.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/5767\/7352\/files\/tein-flex-z-coilovers-mitsubishi-gto-z15a-93-00-663.webp?v=1745221069"},{"product_id":"tein-flex-z-coilovers-mitsubishi-gto-z16a-90-00","title":"Tein Flex Z Coilovers Mitsubishi GTO Z16A 90-00","description":"\u003cp\u003eThe Tein Flex-Z range are incredible, height adjustable coilovers made with excellent built quality at an affordable price. Considering the use of larger tires\/wheels and the lowered ride height, FLEX Z uses twin-tube system, in pursuit of ride comfort on streets. In order to maintain the ride quality on streets with rough spots here and there, a shock absorber has to have sufficient stroke, be low-frictional and move smoothly. As an oil chamber and a gas chamber are not arranged serially in a twin-tube system, it is easy to secure enough stroke. Also, low gas pressure keeps friction low. Its smooth stroke movement makes it possible to follow rough and bumpy road surfaces quite well, offering supple ride at low speed and stable ride at high speed.\u003c\/p\u003e\n\u003cp\u003eFLEX Z also has the ever-popular 16-level damping force adjustment (comp.\/rebound together) feature with the use of needle valve. By turning the adjustment knob, damping force (stiffness) is adjusted linearly step by step, to change the ride and handling of the car to suit driver's needs\/preferences.\u003cbr\u003eUse of well-reputed \"ADVANCE Needle\" at the needle valve for oil flow control secures sufficient damping force adjustable range.\u003cbr\u003eWhether it's for the handling characteristics of sport driving or for the ride quality according to numbers of passengers, finding the most desirable setting is easier than ever.\u003c\/p\u003e\n\u003cp\u003eFlex-Z features:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eIncredibly Low Price\u003c\/li\u003e\n\u003cli\u003eTwin-Tube System for Comfortable Ride on Streets\u003c\/li\u003e\n\u003cli\u003eFull-Length System for Ride Height Adjustment with Minimal Change in Ride\u003c\/li\u003e\n\u003cli\u003eDamping Force Adjustable to Change Ride to Desired Settings\u003c\/li\u003e\n\u003cli\u003eCompatible with EDFC Series to enable In-Car Damping Force Adjustment\u003c\/li\u003e\n\u003cli\u003eUpper Mounts Included for Easy Installation\u003c\/li\u003e\n\u003cli\u003eHighly Durable \u0026amp; Reliable\u003c\/li\u003e\n\u003cli\u003eHighly-Rigid Bracket \u0026amp; Shell Case\u003c\/li\u003e\n\u003cli\u003eSmooth Ride Height Adjustment \u0026amp; One-of-A-Kind Adjusting Wrench\u003c\/li\u003e\n\u003cli\u003eSag-resistant Springs\u003c\/li\u003e\n\u003cli\u003eHigh-Spec Damper Oil\u003c\/li\u003e\n\u003cli\u003eReplacement Service available to Bring Used Shock Absorbers Back to Life\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Tein","offers":[{"title":"Default Title","offer_id":47327781126440,"sku":"TEIN-VSR74-C1SA4","price":1080.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/5767\/7352\/files\/tein-flex-z-coilovers-mitsubishi-gto-z16a-90-00-425.webp?v=1745220652"},{"product_id":"competition-clutch-flywheel-mitsubishi-3000gt-gto-6g72tt","title":"Competition Clutch Flywheel Mitsubishi 3000GT GTO 6G72TT","description":"\u003cp\u003eCompetition Clutch flywheels are made of 4140 forged steel and are a one-piece design. This helps significantly in reducing the chances of ring gear separation and friction surface warpage. All flywheels can be resurfaced. The correct flywheel step can be obtained in the CCI catalog or by calling us direct. Flywheel weights vary from 8lbs to 18lbs depending on application.\u003cbr\u003e\u003cbr\u003e\nThe lightweight steel flywheel (ST suffix) is recommended for naturally aspirated and\/or street driven applications. This flywheel preserves low-end torque and driveability. Well-suited for Gravity, Stage 1 and Stage 2 clutch applications.\n\u003cbr\u003e\u003cbr\u003e\nThe ultra lightweight steel flywheel (STU suffix) is recommended for forced induction  and\/or track and rally racing applications. This flywheel is machined with less material to assist in quicker revving capabilities. Well-suited for Stage 3 and up clutch applications.\n\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAdditional Info: \u003c\/strong\u003eLightweight Flywheel - 6.64KG\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBHP Rating: \u003c\/strong\u003eBHP\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eNotes: \u003c\/strong\u003e\u003c\/p\u003e","brand":"Competition Clutch","offers":[{"title":"Default Title","offer_id":47405862191400,"sku":"CC-2-622-ST","price":434.83,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/5767\/7352\/files\/competition-clutch-flywheel-mitsubishi-3000gt-gto-6g72tt-564.webp?v=1745234309"},{"product_id":"competition-clutch-kit-mitsubishi-3000gt-gto-6g72tt","title":"Competition Clutch Kit Mitsubishi 3000GT GTO 6G72TT","description":"\u003cp\u003eCompetition Clutch has established itself as a leading manufacturer of high-performance clutch assemblies for sport compact vehicles. From everyday commuters to the fiercest racing machines, their products find application across the spectrum of driving needs. Competition Clutch's components grace some of the most esteemed vehicles within the automotive industry, boasting a track record of performance and reliability trusted by professionals and enthusiasts alike.\u003c\/p\u003e\n\u003cp\u003eDriven by a commitment to excellence, Competition Clutch utilizes only the finest materials and meticulous craftsmanship in their clutch assemblies. This dedication to quality translates into superior performance, evident in the increased clamping force and robust disc designs offered by their products. Uncompromising satisfaction is a cornerstone of the Competition Clutch experience, further elevated by their competitive pricing structure.\u003c\/p\u003e\n\u003cp\u003eIn essence, Competition Clutch empowers automotive enthusiasts and professionals alike to push the limits of their vehicles with confidence, knowing they are supported by reliable and meticulously crafted clutch technology. Their dedication to quality, performance, and customer satisfaction solidifies Competition Clutch's position as a top contender in the high-performance clutch market.\u003c\/p\u003e","brand":"Competition Clutch","offers":[{"title":"Stage 2","offer_id":47405872808232,"sku":"5075-2100-1","price":448.0,"currency_code":"GBP","in_stock":true},{"title":"Stage 4","offer_id":47405872873768,"sku":"CC-5075-1620","price":448.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/5767\/7352\/files\/competition-clutch-kit-mitsubishi-3000gt-gto-6g72tt-stage-4-flywheel-888.webp?v=1745237665"},{"product_id":"seibon-oem-style-carbon-fibre-bonnet-mitsubishi-3000gt-94-99","title":"Seibon OEM-Style Carbon Fibre Bonnet Mitsubishi 3000GT 94-99","description":"\u003cdiv\u003eSeibon Carbon components are carefully hand-crafted Using Only The finest Materials. Our Production Team Offers Superior craftsmanship With Over 15 Years Of experience Working With carbon fibre.\u003cbr\u003e\u003cbr\u003e\nEvery component is constructed With a consistent Weave Pattern. Our Production Processes allow exceptional carbon\/resin Ratio, creating high Product Stiffness That also leads To extra Strength. For a Stunning finish, Our Products are coated With a glossy clear coat That does Not chip Or flake. We Meticulously inspect all Of Our components and Stand firmly behind Our Products So That You can enjoy Peace Of Mind With every genuine Seibon Carbon Product.B \u003cbr\u003e\u003cbr\u003e\nCreating Performance-oriented Products That help Shed Unnecessary Weight Without Sacrificing Style is Our Specialty. Race after Race, Seibon Products have Proven To be as Strong as The driver's ambition To Win, Thus Making Seibon Carbon The Preferred brand among Professional drivers.\u003cbr\u003e\n\u003c\/div\u003e","brand":"Seibon Carbon","offers":[{"title":"Default Title","offer_id":47411106545960,"sku":"SBON-HD9498MITGT-OE","price":1412.4,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/5767\/7352\/files\/seibon-oem-style-carbon-fibre-bonnet-mitsubishi-3000gt-94-99-doors-boot-173.webp?v=1745266736"},{"product_id":"seibon-dvii-style-carbon-fibre-bonnet-mitsubishi-3000gt-94-99","title":"Seibon DVII-Style Carbon Fibre Bonnet Mitsubishi 3000GT 94-99","description":"\u003cdiv\u003eSeibon Carbon components are carefully hand-crafted Using Only The finest Materials. Our Production Team Offers Superior craftsmanship With Over 15 Years Of experience Working With carbon fibre.\u003cbr\u003e\u003cbr\u003e\nEvery component is constructed With a consistent Weave Pattern. Our Production Processes allow exceptional carbon\/resin Ratio, creating high Product Stiffness That also leads To extra Strength. For a Stunning finish, Our Products are coated With a glossy clear coat That does Not chip Or flake. We Meticulously inspect all Of Our components and Stand firmly behind Our Products So That You can enjoy Peace Of Mind With every genuine Seibon Carbon Product.B \u003cbr\u003e\u003cbr\u003e\nCreating Performance-oriented Products That help Shed Unnecessary Weight Without Sacrificing Style is Our Specialty. Race after Race, Seibon Products have Proven To be as Strong as The driver's ambition To Win, Thus Making Seibon Carbon The Preferred brand among Professional drivers.\u003cbr\u003e\n\u003c\/div\u003e","brand":"Seibon Carbon","offers":[{"title":"Default Title","offer_id":47411107168552,"sku":"HD9498MITGT-DVII","price":1730.4,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/5767\/7352\/files\/seibon-dvii-style-carbon-fibre-bonnet-mitsubishi-3000gt-94-99-doors-boot-504.webp?v=1749575480"},{"product_id":"arp-single-rod-bolt-kit-mitsubishi-gto-3-0-3-5-v6-107-6024","title":"ARP Single Rod Bolt Kit Mitsubishi GTO 3.0 3.5 V6 107-6024","description":"All ARP rod bolts are heat-treated before grinding and thread rolling and have a large underhead radius for greater strength. Guaranteed to pass magnetic inspection testing, these bolts are nearly five times stronger than OEM bolts. They're used in applications ranging from stock replacement to Circle Track, marine, and drag racing engines. \u003cbr\u003e\u003cbr\u003e Please note, a generic product image has been used","brand":"ARP","offers":[{"title":"Default Title","offer_id":47443571769640,"sku":"ARP-107-6024","price":17.36,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/5767\/7352\/files\/arp-single-rod-bolt-kit-mitsubishi-gto-3-0-5-v6-107-6024-engine-bolts-studs-and-bearings-612.webp?v=1745280824"},{"product_id":"arp-rod-bolt-kit-mitsubishi-gto-3000gt-3-0-3-5-v6-107-6004","title":"ARP Rod Bolt Kit Mitsubishi GTO 3000GT 3.0 3.5 V6 107-6004","description":"All ARP rod bolts are heat-treated before grinding and thread rolling and have a large underhead radius for greater strength. Guaranteed to pass magnetic inspection testing, these bolts are nearly five times stronger than OEM bolts. They're used in applications ranging from stock replacement to Circle Track, marine, and drag racing engines. \u003cbr\u003e\u003cbr\u003e Please note, a generic product image has been used","brand":"ARP","offers":[{"title":"Default Title","offer_id":47443572392232,"sku":"ARP-107-6004","price":93.52,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/5767\/7352\/files\/arp-rod-bolt-kit-mitsubishi-gto-3000gt-3-0-5-v6-107-6004-engine-bolts-studs-and-bearings-994.webp?v=1745283266"},{"product_id":"arp-main-stud-kit-mitsubishi-gto-3-0-v6-6g72-93-207-5801","title":"ARP Main Stud Kit Mitsubishi GTO 3.0 V6 6G72 93+ 207-5801","description":"ARP Pro Series cylinder main stud kits are used by top professional engine builders throughout the world, with good reason. Manufactured from premium grade 8740 alloy, precisely heat treated and then ground and thread rolled. This procedure is used to give a fatigue strength 10 times higher than studs produced in other ways.\u003cbr\u003e\u003cbr\u003e\nARP Pro series cylinder main studs assure optimum gasket sealing making them ideal for high compression race engines or turbo \/ super charged engines running high boost level.\u003cbr\u003e\u003cbr\u003e Please note, a generic product image has been used","brand":"ARP","offers":[{"title":"Default Title","offer_id":47443576783144,"sku":"ARP-207-5801","price":242.98,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/5767\/7352\/files\/arp-main-stud-kit-mitsubishi-gto-3-0-v6-6g72-93-207-5801-engine-bolts-studs-and-bearings-766.webp?v=1745279318"},{"product_id":"arp-head-stud-kit-mitsubishi-gto-6g72-arp2000-207-4205","title":"ARP Head Stud Kit Mitsubishi GTO 6G72 ARP2000 207-4205","description":"ARP Head Stud kit. It is for good reason that virtually every top professional engine builder relies on ARP Pro Series head studs for their all out competition engines. Simply stated, there's not a better stud setup on the market today. ARP uses a premium grade 8740 alloy that is rated far superior to ﾓaircraftï¾” quality. Each stud is placed vertically in special racks and precisely heat-treated to 200,000 psi.\u003cbr\u003e\u003cbr\u003e Following heat-treat, each stud is centerless ground to make it as close to perfectly concentric as possible. This procedure involves about ten very slight cuts and results in an exceptionally straight part.\n\n\u003cbr\u003e\u003cbr\u003e Please note, a generic product image has been used","brand":"ARP","offers":[{"title":"Default Title","offer_id":47443578716456,"sku":"ARP-207-4205","price":586.35,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/5767\/7352\/files\/arp-head-stud-kit-mitsubishi-gto-6g72-arp2000-207-4205-engine-bolts-studs-and-bearings-952.webp?v=1745279453"},{"product_id":"tegiwa-setrab-oil-cooler-kit-mitsubishi","title":"Tegiwa Setrab\/Mocal Oil Cooler Kit MITSUBISHI","description":"\u003cp\u003eTEGIWA Oil Cooler kit. Features only the best quality parts. Coolers are either Setrab or Mocal (depending on stock) and sandwich plates are manufactured by Mocal, the universal fitting kit is manufactured right here in the UK and it comes complete with high quality AN fittings and braided hose. They are available with either a normal sandwich plate or a thermostatic sandwich plate. Choose from 13, 16, 19 and a 25 row kit. The kit is a universal fitment, but with the fitting kit it should be easy to mount on all cars.\u003c\/p\u003e","brand":"Tegiwa","offers":[{"title":"13 \/ Normal","offer_id":47446176629032,"sku":"T-1577025-13","price":221.76,"currency_code":"GBP","in_stock":true},{"title":"16 \/ Normal","offer_id":47446176661800,"sku":"T-1577025-16","price":242.55,"currency_code":"GBP","in_stock":true},{"title":"19 \/ Normal","offer_id":47446176694568,"sku":"T-1577025-19","price":263.34,"currency_code":"GBP","in_stock":true},{"title":"25 \/ Normal","offer_id":47446176727336,"sku":"T-1577025-25","price":284.13,"currency_code":"GBP","in_stock":true},{"title":"13 \/ Thermostatic","offer_id":47446176760104,"sku":"T-1577025-13T","price":249.48,"currency_code":"GBP","in_stock":true},{"title":"16 \/ Thermostatic","offer_id":47446176792872,"sku":"T-1577025-16T","price":270.27,"currency_code":"GBP","in_stock":true},{"title":"19 \/ Thermostatic","offer_id":47446176825640,"sku":"T-1577025-19T","price":291.06,"currency_code":"GBP","in_stock":true},{"title":"25 \/ Thermostatic","offer_id":47446176858408,"sku":"T-1577025-25T","price":311.85,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/5767\/7352\/files\/tegiwa-setrab-mocal-oil-cooler-kit-mitsubishi-13-normal-coolers-675.webp?v=1749035890"},{"product_id":"tegiwa-hubcentric-wheel-spacers-mitsubishi-5x114-pair","title":"Tegiwa Hubcentric Wheel Spacers MITSUBISHI 5x114 Pair","description":"\u003cp\u003eTEGIWA Wheel Spacers. These hubcentric kits are without doubt, the finest on the market. Manufactured from billet aluminium and then anodized satin black for a subtle and durable finish. When fitted they will not only enhance the appearance but improve the stability of your vehicle. Whether you want to fill out the gap between tyre and arch or increase your track width these spacers are the perfect solution. Available in both 15mm and 25mm width. Supplied complete with all fixings for a 'bolt-on' easy installation. Sold in pairs. Select the width you require.\u003c\/p\u003e","brand":"Tegiwa","offers":[{"title":"15MM \/ 5X114","offer_id":47446310289704,"sku":"T-1577024-A","price":98.16,"currency_code":"GBP","in_stock":true},{"title":"25MM \/ 5X114","offer_id":47446310322472,"sku":"T-1577024-B","price":109.73,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/5767\/7352\/files\/tegiwa-hubcentric-wheel-spacers-mitsubishi-5x114-pair-370.webp?v=1749578839"},{"product_id":"ferodo-ds2500-brake-pads-front-3000gt-gto-92-96","title":"Ferodo DS2500 Brake Pads Front 3000GT GTO 92-96","description":"\u003cp\u003eDS2500 is amongst the foremost high performance track day pads in the business. It is also suitable for some light duty front and many rear pure race applications. It offers excellent refinement for such a high performance pad. The main characteristics of DS2500 are:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eTrack day \u0026amp; light race use for all vehicle types\u003c\/li\u003e\n\u003cli\u003eRoad style refinement but with race material ability to withstand heat with respect to life and µ\u003c\/li\u003e\n\u003cli\u003eAverage friction coefficient of 0.42 over working temperature range of 20°-500°C\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Ferodo","offers":[{"title":"Default Title","offer_id":47461719867688,"sku":"FCP765H","price":175.57,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/5767\/7352\/files\/ferodo-ds2500-brake-pads-front-3000gt-gto-92-96-470.webp?v=1716641114"},{"product_id":"ferodo-ds3000-brake-pads-front-3000gt-gto-92-96","title":"Ferodo DS3000 Brake Pads Front 3000GT GTO 92-96","description":"\u003cp\u003eDS3000 is the FERODO RACING compound that has set the braking standard from 1998. It has contributed to countless wins and podium positions in many Touring car, rally \u0026amp; GT championships around the world. The main characteristics of DS3000 are:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHeavy duty all-round material choice\u003c\/li\u003e\n\u003cli\u003eShort bedding time\u003c\/li\u003e\n\u003cli\u003eMultiple applications including touring car, rally, Group N, single seat, hill-climb\u003c\/li\u003e\n\u003cli\u003eAverage friction coefficient 0.48 over working temperature range of 200°-650°C\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Ferodo","offers":[{"title":"Default Title","offer_id":47461720064296,"sku":"FCP765R","price":233.35,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/5767\/7352\/files\/ferodo-ds3000-brake-pads-front-3000gt-gto-92-96-583.webp?v=1716641127"},{"product_id":"exedy-oem-clutch-kit-mitsubishi-3000gt-gto-coupe-z11a-3-0-fwd-6g72-90-00","title":"Exedy OEM Clutch Kit Mitsubishi 3000GT GTO Coupe Z11A 3.0 FWD 6G72 90-00","description":"\u003cp\u003eEXEDY Clutch Kit. This is a brand new genuine Exedy standard OE replacement clutch kit. It contains all the necessary components to do your clutch replacement and is the perfect setup for any stock or lightly modified vehicle. Exedy Globalparts Corporation was founded in 1923 and its clutch manufacturing business and prominent brand name Daikin Clutch are known throughout the world for supplying quality powertrain products. Exedy supplies to all 11 vehicle manufacturers in Japan including Honda as well as many other vehicle manufacturers. Exedy is the largest clutch manufacturer in Japan and their name stands for the highest in quality and performance.\u003c\/p\u003e\u003cbr\u003e\u003cbr\u003e \u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eOuter Diameter (mm)\u003c\/strong\u003e\u003cbr\u003e225\u003cbr\u003e\u003cstrong\u003eNumber of Splines\u003c\/strong\u003e\u003cbr\u003e20\u003cbr\u003e\u003cstrong\u003ePCD (mm)\u003c\/strong\u003e\u003cbr\u003e247\u003cbr\u003e\u003cstrong\u003eKit Type\u003c\/strong\u003e\u003cbr\u003eThree Piece\u003cbr\u003e\u003cstrong\u003eAdditional Info\u003c\/strong\u003e\u003cbr\u003eWith bearing(s)\u003cp\u003eFits:\u003c\/p\u003e\u003cp\u003eMITSUBISHI 3000GT (Z1#A) 3.0i 2WD (Z11A) 224hp 6cyl  Front Wheel Drive Coupe 09\/1990-\u0026gt;09\/2000\u003c\/p\u003e\u003cp\u003eMITSUBISHI GTO Coupe (Z1_A) 3.0i 2WD (Z11A) 222hp 6cyl  Front Wheel Drive Coupe 09\/1990-\u0026gt;09\/2000\u003c\/p\u003e","brand":"Exedy","offers":[{"title":"Default Title","offer_id":47572987445544,"sku":"MBK2075","price":143.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/5767\/7352\/files\/exedy-oem-clutch-kit-mitsubishi-3000gt-gto-coupe-z11a-3-0-fwd-6g72-90-00-flywheel-482.webp?v=1716748535"},{"product_id":"exedy-oem-clutch-kit-mitsubishi-3000gt-gto-coupe-z16a-3-0-awd-6g72","title":"Exedy OEM Clutch Kit Mitsubishi 3000GT GTO Coupe Z16A 3.0 AWD 6G72","description":"\u003cp\u003eEXEDY Clutch Kit. This is a brand new genuine Exedy standard OE replacement clutch kit. It contains all the necessary components to do your clutch replacement and is the perfect setup for any stock or lightly modified vehicle. Exedy Globalparts Corporation was founded in 1923 and its clutch manufacturing business and prominent brand name Daikin Clutch are known throughout the world for supplying quality powertrain products. Exedy supplies to all 11 vehicle manufacturers in Japan including Honda as well as many other vehicle manufacturers. Exedy is the largest clutch manufacturer in Japan and their name stands for the highest in quality and performance.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cbr\u003e \u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eOuter Diameter (mm)\u003c\/strong\u003e\u003cbr\u003e225\u003cbr\u003e\u003cstrong\u003eNumber of Splines\u003c\/strong\u003e\u003cbr\u003e20\u003cbr\u003e\u003cstrong\u003ePCD (mm)\u003c\/strong\u003e\u003cbr\u003e225\u003cbr\u003e\u003cstrong\u003eKit Type\u003c\/strong\u003e\u003cbr\u003eThree Piece\u003cbr\u003e\u003cstrong\u003eAdditional Info\u003c\/strong\u003e\u003cbr\u003eWith bearing(s)\u003c\/p\u003e\n\u003cp\u003eFits:\u003c\/p\u003e\n\u003cp\u003eMITSUBISHI 3000GT (Z1#A) 3.0i 24V 4WD (Z15A) 224hp 6cyl All-wheel Drive Coupe 09\/1990-\u0026gt;09\/2000\u003c\/p\u003e\n\u003cp\u003eMITSUBISHI GTO Coupe (Z1_A) 3.0 AWD (Z15A) 222hp 6cyl Petrol Engine All-wheel Drive Coupe 05\/1996-\u0026gt;08\/2000\u003c\/p\u003e\n\u003cp\u003eMITSUBISHI GTO Coupe (Z1_A) 3.0 AWD (Z15A) 224hp 6cyl Petrol Engine All-wheel Drive Coupe 06\/1989-\u0026gt;04\/1996\u003c\/p\u003e","brand":"Exedy","offers":[{"title":"Default Title","offer_id":47572987478312,"sku":"MBK2053","price":142.96,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/5767\/7352\/files\/exedy-oem-clutch-kit-mitsubishi-3000gt-gto-coupe-z16a-3-0-awd-6g72-flywheel-865.webp?v=1750347884"},{"product_id":"exedy-oem-clutch-kit-mitsubishi-3000gt-gto-coupe-z16a-3-0-turbo-awd-6g72t","title":"Exedy OEM Clutch Kit Mitsubishi 3000GT GTO Coupe Z16A 3.0 Turbo AWD 6G72T","description":"\u003cp\u003eEXEDY Clutch Kit. This is a brand new genuine Exedy standard OE replacement clutch kit. It contains all the necessary components to do your clutch replacement and is the perfect setup for any stock or lightly modified vehicle. Exedy Globalparts Corporation was founded in 1923 and its clutch manufacturing business and prominent brand name Daikin Clutch are known throughout the world for supplying quality powertrain products. Exedy supplies to all 11 vehicle manufacturers in Japan including Honda as well as many other vehicle manufacturers. Exedy is the largest clutch manufacturer in Japan and their name stands for the highest in quality and performance.\u003c\/p\u003e\u003cbr\u003e\u003cbr\u003e \u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eOuter Diameter (mm)\u003c\/strong\u003e\u003cbr\u003e250\u003cbr\u003e\u003cstrong\u003eNumber of Splines\u003c\/strong\u003e\u003cbr\u003e23\u003cbr\u003e\u003cstrong\u003ePCD (mm)\u003c\/strong\u003e\u003cbr\u003e275\u003cbr\u003e\u003cstrong\u003eKit Type\u003c\/strong\u003e\u003cbr\u003eThree Piece\u003cbr\u003e\u003cstrong\u003eAdditional Info\u003c\/strong\u003e\u003cbr\u003eWith bearing(s)\u003cp\u003eFits:\u003c\/p\u003e\u003cp\u003eMITSUBISHI 3000GT (Z1#A) 3.0Ti 24V 4WD (Z16A) 286hp 6cyl Petrol Engine All-wheel Drive Coupe 01\/1990-\u0026gt;08\/1999\u003c\/p\u003e\u003cp\u003eMITSUBISHI GTO Coupe (Z1_A) 3.0 AWD (Z16A) 286hp 6cyl Petrol Engine All-wheel Drive Coupe 01\/1994-\u0026gt;12\/2000\u003c\/p\u003e\u003cp\u003eMITSUBISHI GTO Coupe (Z1_A) 3.0 AWD (Z16A) 280hp 6cyl Petrol Engine All-wheel Drive Coupe 05\/1996-\u0026gt;09\/2000\u003c\/p\u003e","brand":"Exedy","offers":[{"title":"Default Title","offer_id":47572987511080,"sku":"MBK2050","price":253.48,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/5767\/7352\/files\/exedy-oem-clutch-kit-mitsubishi-3000gt-gto-coupe-z16a-3-0-turbo-awd-6g72t-flywheel-353.webp?v=1749803551"},{"product_id":"acl-race-series-performance-engine-bearings-mitsubishi-6g72-6g72t-6g73","title":"ACL Race Series Performance Engine Bearings Mitsubishi 6G72 6G72T 6G73","description":"\u003cp\u003eThe unique combination of design, metallurgy and engineering come together to deliver what drivers expect from high performance Trimetal engine bearings.\u003c\/p\u003e\n\u003cp\u003eDesigned to withstand higher RPM conditions, ACL Race Series Engine Bearings are available for many of the popular 4, 6 \u0026amp; 8 cylinder applications and feature:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHigh strength overlay plate with reduced thickness for improved fatigue properties\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003eHardened steel backs on all rod bearings to improve the support of the bearing lining and assist with bearing retention in the housing.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003eIncreased crush for improved bearing retention\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003eElimination of flash plating on the back of the bearings to improve heat transfer through the bearings and to maximize the grip between the bearings and its housing.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003eIncreased eccentricity to compensate for bore distortion at high rpm and to assist in the formation of hydrodynamic oil films.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e3\/4 grooved Main Bearings to optimize bearing load carrying surface area and oil flow to the conrod bearings.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003eTight consistent wall tolerances to help you maintain consistent clearances.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003eEnlarged ID chamfers on bearing edges where required to accommodate large fillet radius on performance crankshafts.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ACL","offers":[{"title":"Conrod \/ 0.25mm Oversize - Machined Crank","offer_id":47636092813608,"sku":"6B1140H-.25","price":96.13,"currency_code":"GBP","in_stock":true},{"title":"Conrod \/ 0.025mm Oversize - Tighter Oil Clearance","offer_id":47636092944680,"sku":"6B1140H-.025","price":96.13,"currency_code":"GBP","in_stock":true},{"title":"Conrod \/ Standard - Stock Crank","offer_id":47636093042984,"sku":"6B1140H-STD","price":96.13,"currency_code":"GBP","in_stock":true},{"title":"Main \/ 0.25mm Oversize - Machined Crank","offer_id":47636093108520,"sku":"4M1149H -.25","price":115.61,"currency_code":"GBP","in_stock":true},{"title":"Main \/ 0.025mm Oversize - Tighter Oil Clearance","offer_id":47636093174056,"sku":"4M1149H-.025","price":141.23,"currency_code":"GBP","in_stock":true},{"title":"Main \/ Standard - Stock Crank","offer_id":47636093239592,"sku":"4M1149H-STD","price":141.23,"currency_code":"GBP","in_stock":true},{"title":"Main \/ Standard - Extra Oil Clearance","offer_id":47636093272360,"sku":"4M1149HX-STD","price":141.23,"currency_code":"GBP","in_stock":true},{"title":"Thrustwasher \/ Standard","offer_id":47636093305128,"sku":"2T1149-STD","price":4.03,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/5767\/7352\/files\/acl-race-series-performance-engine-bearings-mitsubishi-6g72-6g72t-6g73-bolts-studs-and-196.webp?v=1716758606"},{"product_id":"mitsubishi-oil-filter-removal-tool","title":"Mitsubishi Oil Filter Removal Tool","description":"\u003cp\u003eMitsubishi Oil Filter Tool. These are a must have for any Evo owner. They are perfect fit for genuine Mitsubishi oil filters and some aftermarket filters. They are easier to use than all of the universal style removal tools in that you simply use a 17mm socket\/spanner to remove the filter... it couldnt be any easier!! To fit OEM 15 sided \/ 80mm filters.\u003c\/p\u003e","brand":"Mitsubishi","offers":[{"title":"Default Title","offer_id":47663899607336,"sku":"TI4035012-A","price":7.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/5767\/7352\/files\/mitsubishi-oil-filter-removal-tool-filters-463.webp?v=1749039135"},{"product_id":"ysr-dynamic-pro-sport-coilovers-mitsubishi-3000gt-91-99-2wd","title":"YSR Dynamic Pro Sport Coilovers Mitsubishi 3000Gt 91-99 - 2WD","description":"\u003ch2\u003eDynamic Pro Sport\u003c\/h2\u003e\n\u003cdiv style=\"background-image: url('https:\/\/www.tegiwaimports.com\/media\/ysr-desc\/DPS.jpg'); background-size: cover; background-position: center; display: flex; justify-content: flex-start; position: relative; color: white; padding: 20px; margin-bottom: 20px; font-size: 0.9rem;\"\u003e\n    \u003cdiv style=\"position: absolute; top: 0; left: 0; width: 100%; height: 100%; background-color: rgba(0, 0, 0, 0.4); z-index: 1;\"\u003e\u003c\/div\u003e\n    \u003cdiv style=\"position: relative; z-index: 2; width: 70%; display: flex; flex-direction: column;\"\u003e\n        \u003cp style=\"text-shadow: 2px 2px 6px rgba(0, 0, 0, 0.5);\"\u003eYellow Speed Racing's Dynamic Pro Sport coilovers are designed and developed for all motoring enthusiasts that want excellent handling without sacrificing comfort. This suspension system is ideal for daily driving and occasional, light track use. High quality components are adopted to ensure product durability and stability. Each application is fully test fitted and completely road tested to guarantee all our customers perfect performance and comfort expectations.\u003c\/p\u003e\n    \u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eDampening\u003c\/h2\u003e\n\u003cdiv style=\"background-image: url('https:\/\/www.tegiwaimports.com\/media\/ysr-desc\/YSR_ProductPage_DPS_Dampening.jpg'); background-size: cover; background-position: center; display: flex; justify-content: flex-start; position: relative; color: white; padding: 20px; margin-bottom: 20px; font-size: 0.9rem;\"\u003e\n    \u003cdiv style=\"position: absolute; top: 0; left: 0; width: 100%; height: 100%; background-color: rgba(0, 0, 0, 0.4); z-index: 1;\"\u003e\u003c\/div\u003e\n    \u003cdiv style=\"position: relative; z-index: 2; width: 70%; display: flex; flex-direction: column;\"\u003e\n        \u003cp style=\"text-shadow: 2px 2px 6px rgba(0, 0, 0, 0.5);\"\u003eThe Dynamic Pro Sport coilovers feature a 33-way adjustable dampening setting so you can fine-tune your ride to suit the road conditions. This allows the suspension to not only be tailored to your car but also your driving preference.\u003c\/p\u003e\n    \u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eSpares\u003c\/h2\u003e\n\u003cdiv style=\"background-image: url('https:\/\/www.tegiwaimports.com\/media\/ysr-desc\/Spares.jpg'); background-size: cover; background-position: center; display: flex; justify-content: flex-start; position: relative; color: white; padding: 20px; margin-bottom: 20px; font-size: 0.9rem;\"\u003e\n    \u003cdiv style=\"position: absolute; top: 0; left: 0; width: 100%; height: 100%; background-color: rgba(0, 0, 0, 0.4); z-index: 1;\"\u003e\u003c\/div\u003e\n    \u003cdiv style=\"position: relative; z-index: 2; width: 70%; display: flex; flex-direction: column;\"\u003e\n        \u003cp style=\"text-shadow: 2px 2px 6px rgba(0, 0, 0, 0.5);\"\u003eFrom dust covers to replacement struts, we have spare parts to refurbish or repair your coilover should the need ever arise.\u003c\/p\u003e\n        \u003cdiv style=\"display: flex; gap: 20px;\"\u003e\n            \u003cp\u003e\u003ca href=\"https:\/\/www.tegiwa.com\/products\/yellow-speed-racing-double-a-arm-strut-replacement-parts?_pos=3\u0026amp;_sid=d1fd45544\u0026amp;_ss=r\u0026amp;_fid=c37847c28\u0026amp;variant=54908585836925\" target=\"_blank\" style=\"color: yellow; text-decoration: underline;\"\u003eView Spares: Double A-Arm\u003c\/a\u003e\u003c\/p\u003e\n            \u003cp\u003e\u003ca href=\"https:\/\/www.tegiwa.com\/products\/yellow-speed-racing-macpherson-strut-replacement-parts?_pos=2\u0026amp;_sid=f753f2af9\u0026amp;_ss=r\u0026amp;_fid=c8aad5f9f\u0026amp;variant=54908585017725\" target=\"_blank\" style=\"color: yellow; text-decoration: underline;\"\u003eView Spares: MacPherson Strut\u003c\/a\u003e\u003c\/p\u003e\n        \u003c\/div\u003e\n    \u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eAdjustable Ride Height\u003c\/h2\u003e\n\u003cdiv style=\"background-image: url('https:\/\/www.tegiwaimports.com\/media\/ysr-desc\/Height.jpg'); background-size: cover; background-position: center; display: flex; justify-content: flex-start; position: relative; color: white; padding: 20px; margin-bottom: 20px; font-size: 0.9rem;\"\u003e\n    \u003cdiv style=\"position: absolute; top: 0; left: 0; width: 100%; height: 100%; background-color: rgba(0, 0, 0, 0.4); z-index: 1;\"\u003e\u003c\/div\u003e\n    \u003cdiv style=\"position: relative; z-index: 2; width: 70%; display: flex; flex-direction: column;\"\u003e\n        \u003cp style=\"text-shadow: 2px 2px 6px rgba(0, 0, 0, 0.5);\"\u003eDynamic Pro Sport coilovers have an adjustable ride-height between 50mm-100mm depending on application. For those looking to go even lower, the Super Low coilover is the one for you.\u003c\/p\u003e\n    \u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003e24 Month Warranty\u003c\/h2\u003e\n\u003cdiv style=\"background-image: url('https:\/\/www.tegiwaimports.com\/media\/ysr-desc\/Warranty.jpg'); background-size: cover; background-position: center; display: flex; justify-content: flex-start; position: relative; color: white; padding: 20px; margin-bottom: 20px; font-size: 0.9rem;\"\u003e\n    \u003cdiv style=\"position: absolute; top: 0; left: 0; width: 100%; height: 100%; background-color: rgba(0, 0, 0, 0.4); z-index: 1;\"\u003e\u003c\/div\u003e\n    \u003cdiv style=\"position: relative; z-index: 2; width: 70%; display: flex; flex-direction: column;\"\u003e\n        \u003cp style=\"text-shadow: 2px 2px 6px rgba(0, 0, 0, 0.5);\"\u003eWe want Yellow Speed Racing coilovers to be a manufacturer you can depend on. That's why the Dynamic Pro Sports come with a 24-month limited warranty which guarantees against defects from materials and workmanship.\u003c\/p\u003e\n    \u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eRace Proven\u003c\/h2\u003e\n\u003cdiv style=\"background-image: url('https:\/\/www.tegiwaimports.com\/media\/ysr-desc\/RaceProven.jpg'); background-size: cover; background-position: center; display: flex; justify-content: flex-start; position: relative; color: white; padding: 20px; margin-bottom: 20px; font-size: 0.9rem;\"\u003e\n    \u003cdiv style=\"position: absolute; top: 0; left: 0; width: 100%; height: 100%; background-color: rgba(0, 0, 0, 0.4); z-index: 1;\"\u003e\u003c\/div\u003e\n    \u003cdiv style=\"position: relative; z-index: 2; width: 70%; display: flex; flex-direction: column;\"\u003e\n        \u003cp style=\"text-shadow: 2px 2px 6px rgba(0, 0, 0, 0.5);\"\u003eYellow Speed Racing has been giving race-spec vehicles the platform to win races and compete at the highest levels of motorsport through their suspension systems.\u003c\/p\u003e\n    \u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eMaintenance\u003c\/h2\u003e\n\u003cdiv style=\"background-image: url('https:\/\/www.tegiwaimports.com\/media\/ysr-desc\/Maintenance.jpg'); background-size: cover; background-position: center; display: flex; justify-content: flex-start; position: relative; color: white; padding: 20px; margin-bottom: 20px; font-size: 0.9rem;\"\u003e\n    \u003cdiv style=\"position: absolute; top: 0; left: 0; width: 100%; height: 100%; background-color: rgba(0, 0, 0, 0.4); z-index: 1;\"\u003e\u003c\/div\u003e\n    \u003cdiv style=\"position: relative; z-index: 2; width: 70%; display: flex; flex-direction: column;\"\u003e\n        \u003cp style=\"text-shadow: 2px 2px 6px rgba(0, 0, 0, 0.5);\"\u003eProtect your coilovers with purpose suspension shock sock covers. Made of neoprene\u003c\/p\u003e\n    \u003c\/div\u003e\n\u003c\/div\u003e","brand":"YSR","offers":[{"title":"Default Title","offer_id":47669725069608,"sku":"YS01-MT-DPS001","price":972.96,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/5767\/7352\/files\/ysr-dynamic-pro-sport-coilovers-mitsubishi-3000gt-91-99-2wd-680.webp?v=1716800482"},{"product_id":"ysr-dynamic-pro-sport-coilovers-mitsubishi-3000gt-91-99-4wd","title":"YSR Dynamic Pro Sport Coilovers Mitsubishi 3000Gt 91-99 - 4WD","description":"\u003ch2\u003eDynamic Pro Sport\u003c\/h2\u003e\n\u003cdiv style=\"background-image: url('https:\/\/www.tegiwaimports.com\/media\/ysr-desc\/DPS.jpg'); background-size: cover; background-position: center; display: flex; justify-content: flex-start; position: relative; color: white; padding: 20px; margin-bottom: 20px; font-size: 0.9rem;\"\u003e\n    \u003cdiv style=\"position: absolute; top: 0; left: 0; width: 100%; height: 100%; background-color: rgba(0, 0, 0, 0.4); z-index: 1;\"\u003e\u003c\/div\u003e\n    \u003cdiv style=\"position: relative; z-index: 2; width: 70%; display: flex; flex-direction: column;\"\u003e\n        \u003cp style=\"text-shadow: 2px 2px 6px rgba(0, 0, 0, 0.5);\"\u003eYellow Speed Racing's Dynamic Pro Sport coilovers are designed and developed for all motoring enthusiasts that want excellent handling without sacrificing comfort. This suspension system is ideal for daily driving and occasional, light track use. High quality components are adopted to ensure product durability and stability. Each application is fully test fitted and completely road tested to guarantee all our customers perfect performance and comfort expectations.\u003c\/p\u003e\n    \u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eDampening\u003c\/h2\u003e\n\u003cdiv style=\"background-image: url('https:\/\/www.tegiwaimports.com\/media\/ysr-desc\/YSR_ProductPage_DPS_Dampening.jpg'); background-size: cover; background-position: center; display: flex; justify-content: flex-start; position: relative; color: white; padding: 20px; margin-bottom: 20px; font-size: 0.9rem;\"\u003e\n    \u003cdiv style=\"position: absolute; top: 0; left: 0; width: 100%; height: 100%; background-color: rgba(0, 0, 0, 0.4); z-index: 1;\"\u003e\u003c\/div\u003e\n    \u003cdiv style=\"position: relative; z-index: 2; width: 70%; display: flex; flex-direction: column;\"\u003e\n        \u003cp style=\"text-shadow: 2px 2px 6px rgba(0, 0, 0, 0.5);\"\u003eThe Dynamic Pro Sport coilovers feature a 33-way adjustable dampening setting so you can fine-tune your ride to suit the road conditions. This allows the suspension to not only be tailored to your car but also your driving preference.\u003c\/p\u003e\n    \u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eSpares\u003c\/h2\u003e\n\u003cdiv style=\"background-image: url('https:\/\/www.tegiwaimports.com\/media\/ysr-desc\/Spares.jpg'); background-size: cover; background-position: center; display: flex; justify-content: flex-start; position: relative; color: white; padding: 20px; margin-bottom: 20px; font-size: 0.9rem;\"\u003e\n    \u003cdiv style=\"position: absolute; top: 0; left: 0; width: 100%; height: 100%; background-color: rgba(0, 0, 0, 0.4); z-index: 1;\"\u003e\u003c\/div\u003e\n    \u003cdiv style=\"position: relative; z-index: 2; width: 70%; display: flex; flex-direction: column;\"\u003e\n        \u003cp style=\"text-shadow: 2px 2px 6px rgba(0, 0, 0, 0.5);\"\u003eFrom dust covers to replacement struts, we have spare parts to refurbish or repair your coilover should the need ever arise.\u003c\/p\u003e\n        \u003cdiv style=\"display: flex; gap: 20px;\"\u003e\n            \u003cp\u003e\u003ca href=\"https:\/\/www.tegiwa.com\/products\/yellow-speed-racing-double-a-arm-strut-replacement-parts?_pos=3\u0026amp;_sid=d1fd45544\u0026amp;_ss=r\u0026amp;_fid=c37847c28\u0026amp;variant=54908585836925\" target=\"_blank\" style=\"color: yellow; text-decoration: underline;\"\u003eView Spares: Double A-Arm\u003c\/a\u003e\u003c\/p\u003e\n            \u003cp\u003e\u003ca href=\"https:\/\/www.tegiwa.com\/products\/yellow-speed-racing-macpherson-strut-replacement-parts?_pos=2\u0026amp;_sid=f753f2af9\u0026amp;_ss=r\u0026amp;_fid=c8aad5f9f\u0026amp;variant=54908585017725\" target=\"_blank\" style=\"color: yellow; text-decoration: underline;\"\u003eView Spares: MacPherson Strut\u003c\/a\u003e\u003c\/p\u003e\n        \u003c\/div\u003e\n    \u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eAdjustable Ride Height\u003c\/h2\u003e\n\u003cdiv style=\"background-image: url('https:\/\/www.tegiwaimports.com\/media\/ysr-desc\/Height.jpg'); background-size: cover; background-position: center; display: flex; justify-content: flex-start; position: relative; color: white; padding: 20px; margin-bottom: 20px; font-size: 0.9rem;\"\u003e\n    \u003cdiv style=\"position: absolute; top: 0; left: 0; width: 100%; height: 100%; background-color: rgba(0, 0, 0, 0.4); z-index: 1;\"\u003e\u003c\/div\u003e\n    \u003cdiv style=\"position: relative; z-index: 2; width: 70%; display: flex; flex-direction: column;\"\u003e\n        \u003cp style=\"text-shadow: 2px 2px 6px rgba(0, 0, 0, 0.5);\"\u003eDynamic Pro Sport coilovers have an adjustable ride-height between 50mm-100mm depending on application. For those looking to go even lower, the Super Low coilover is the one for you.\u003c\/p\u003e\n    \u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003e24 Month Warranty\u003c\/h2\u003e\n\u003cdiv style=\"background-image: url('https:\/\/www.tegiwaimports.com\/media\/ysr-desc\/Warranty.jpg'); background-size: cover; background-position: center; display: flex; justify-content: flex-start; position: relative; color: white; padding: 20px; margin-bottom: 20px; font-size: 0.9rem;\"\u003e\n    \u003cdiv style=\"position: absolute; top: 0; left: 0; width: 100%; height: 100%; background-color: rgba(0, 0, 0, 0.4); z-index: 1;\"\u003e\u003c\/div\u003e\n    \u003cdiv style=\"position: relative; z-index: 2; width: 70%; display: flex; flex-direction: column;\"\u003e\n        \u003cp style=\"text-shadow: 2px 2px 6px rgba(0, 0, 0, 0.5);\"\u003eWe want Yellow Speed Racing coilovers to be a manufacturer you can depend on. That's why the Dynamic Pro Sports come with a 24-month limited warranty which guarantees against defects from materials and workmanship.\u003c\/p\u003e\n    \u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eRace Proven\u003c\/h2\u003e\n\u003cdiv style=\"background-image: url('https:\/\/www.tegiwaimports.com\/media\/ysr-desc\/RaceProven.jpg'); background-size: cover; background-position: center; display: flex; justify-content: flex-start; position: relative; color: white; padding: 20px; margin-bottom: 20px; font-size: 0.9rem;\"\u003e\n    \u003cdiv style=\"position: absolute; top: 0; left: 0; width: 100%; height: 100%; background-color: rgba(0, 0, 0, 0.4); z-index: 1;\"\u003e\u003c\/div\u003e\n    \u003cdiv style=\"position: relative; z-index: 2; width: 70%; display: flex; flex-direction: column;\"\u003e\n        \u003cp style=\"text-shadow: 2px 2px 6px rgba(0, 0, 0, 0.5);\"\u003eYellow Speed Racing has been giving race-spec vehicles the platform to win races and compete at the highest levels of motorsport through their suspension systems.\u003c\/p\u003e\n    \u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eMaintenance\u003c\/h2\u003e\n\u003cdiv style=\"background-image: url('https:\/\/www.tegiwaimports.com\/media\/ysr-desc\/Maintenance.jpg'); background-size: cover; background-position: center; display: flex; justify-content: flex-start; position: relative; color: white; padding: 20px; margin-bottom: 20px; font-size: 0.9rem;\"\u003e\n    \u003cdiv style=\"position: absolute; top: 0; left: 0; width: 100%; height: 100%; background-color: rgba(0, 0, 0, 0.4); z-index: 1;\"\u003e\u003c\/div\u003e\n    \u003cdiv style=\"position: relative; z-index: 2; width: 70%; display: flex; flex-direction: column;\"\u003e\n        \u003cp style=\"text-shadow: 2px 2px 6px rgba(0, 0, 0, 0.5);\"\u003eProtect your coilovers with purpose suspension shock sock covers. Made of neoprene\u003c\/p\u003e\n    \u003c\/div\u003e\n\u003c\/div\u003e","brand":"YSR","offers":[{"title":"Default Title","offer_id":47669725298984,"sku":"YS01-MT-DPS002","price":972.96,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/5767\/7352\/files\/ysr-dynamic-pro-sport-coilovers-mitsubishi-3000gt-91-99-4wd-765.webp?v=1716800487"},{"product_id":"ysr-dynamic-pro-sport-coilovers-mitsubishi-gto-90-01-4wd","title":"YSR Dynamic Pro Sport Coilovers Mitsubishi Gto 90-01 - 4WD","description":"\u003ch2\u003eDynamic Pro Sport\u003c\/h2\u003e\n\u003cdiv style=\"background-image: url('https:\/\/www.tegiwaimports.com\/media\/ysr-desc\/DPS.jpg'); background-size: cover; background-position: center; display: flex; justify-content: flex-start; position: relative; color: white; padding: 20px; margin-bottom: 20px; font-size: 0.9rem;\"\u003e\n    \u003cdiv style=\"position: absolute; top: 0; left: 0; width: 100%; height: 100%; background-color: rgba(0, 0, 0, 0.4); z-index: 1;\"\u003e\u003c\/div\u003e\n    \u003cdiv style=\"position: relative; z-index: 2; width: 70%; display: flex; flex-direction: column;\"\u003e\n        \u003cp style=\"text-shadow: 2px 2px 6px rgba(0, 0, 0, 0.5);\"\u003eYellow Speed Racing's Dynamic Pro Sport coilovers are designed and developed for all motoring enthusiasts that want excellent handling without sacrificing comfort. This suspension system is ideal for daily driving and occasional, light track use. High quality components are adopted to ensure product durability and stability. Each application is fully test fitted and completely road tested to guarantee all our customers perfect performance and comfort expectations.\u003c\/p\u003e\n    \u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eDampening\u003c\/h2\u003e\n\u003cdiv style=\"background-image: url('https:\/\/www.tegiwaimports.com\/media\/ysr-desc\/YSR_ProductPage_DPS_Dampening.jpg'); background-size: cover; background-position: center; display: flex; justify-content: flex-start; position: relative; color: white; padding: 20px; margin-bottom: 20px; font-size: 0.9rem;\"\u003e\n    \u003cdiv style=\"position: absolute; top: 0; left: 0; width: 100%; height: 100%; background-color: rgba(0, 0, 0, 0.4); z-index: 1;\"\u003e\u003c\/div\u003e\n    \u003cdiv style=\"position: relative; z-index: 2; width: 70%; display: flex; flex-direction: column;\"\u003e\n        \u003cp style=\"text-shadow: 2px 2px 6px rgba(0, 0, 0, 0.5);\"\u003eThe Dynamic Pro Sport coilovers feature a 33-way adjustable dampening setting so you can fine-tune your ride to suit the road conditions. This allows the suspension to not only be tailored to your car but also your driving preference.\u003c\/p\u003e\n    \u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eSpares\u003c\/h2\u003e\n\u003cdiv style=\"background-image: url('https:\/\/www.tegiwaimports.com\/media\/ysr-desc\/Spares.jpg'); background-size: cover; background-position: center; display: flex; justify-content: flex-start; position: relative; color: white; padding: 20px; margin-bottom: 20px; font-size: 0.9rem;\"\u003e\n    \u003cdiv style=\"position: absolute; top: 0; left: 0; width: 100%; height: 100%; background-color: rgba(0, 0, 0, 0.4); z-index: 1;\"\u003e\u003c\/div\u003e\n    \u003cdiv style=\"position: relative; z-index: 2; width: 70%; display: flex; flex-direction: column;\"\u003e\n        \u003cp style=\"text-shadow: 2px 2px 6px rgba(0, 0, 0, 0.5);\"\u003eFrom dust covers to replacement struts, we have spare parts to refurbish or repair your coilover should the need ever arise.\u003c\/p\u003e\n        \u003cdiv style=\"display: flex; gap: 20px;\"\u003e\n            \u003cp\u003e\u003ca href=\"https:\/\/www.tegiwa.com\/products\/yellow-speed-racing-double-a-arm-strut-replacement-parts?_pos=3\u0026amp;_sid=d1fd45544\u0026amp;_ss=r\u0026amp;_fid=c37847c28\u0026amp;variant=54908585836925\" target=\"_blank\" style=\"color: yellow; text-decoration: underline;\"\u003eView Spares: Double A-Arm\u003c\/a\u003e\u003c\/p\u003e\n            \u003cp\u003e\u003ca href=\"https:\/\/www.tegiwa.com\/products\/yellow-speed-racing-macpherson-strut-replacement-parts?_pos=2\u0026amp;_sid=f753f2af9\u0026amp;_ss=r\u0026amp;_fid=c8aad5f9f\u0026amp;variant=54908585017725\" target=\"_blank\" style=\"color: yellow; text-decoration: underline;\"\u003eView Spares: MacPherson Strut\u003c\/a\u003e\u003c\/p\u003e\n        \u003c\/div\u003e\n    \u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eAdjustable Ride Height\u003c\/h2\u003e\n\u003cdiv style=\"background-image: url('https:\/\/www.tegiwaimports.com\/media\/ysr-desc\/Height.jpg'); background-size: cover; background-position: center; display: flex; justify-content: flex-start; position: relative; color: white; padding: 20px; margin-bottom: 20px; font-size: 0.9rem;\"\u003e\n    \u003cdiv style=\"position: absolute; top: 0; left: 0; width: 100%; height: 100%; background-color: rgba(0, 0, 0, 0.4); z-index: 1;\"\u003e\u003c\/div\u003e\n    \u003cdiv style=\"position: relative; z-index: 2; width: 70%; display: flex; flex-direction: column;\"\u003e\n        \u003cp style=\"text-shadow: 2px 2px 6px rgba(0, 0, 0, 0.5);\"\u003eDynamic Pro Sport coilovers have an adjustable ride-height between 50mm-100mm depending on application. For those looking to go even lower, the Super Low coilover is the one for you.\u003c\/p\u003e\n    \u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003e24 Month Warranty\u003c\/h2\u003e\n\u003cdiv style=\"background-image: url('https:\/\/www.tegiwaimports.com\/media\/ysr-desc\/Warranty.jpg'); background-size: cover; background-position: center; display: flex; justify-content: flex-start; position: relative; color: white; padding: 20px; margin-bottom: 20px; font-size: 0.9rem;\"\u003e\n    \u003cdiv style=\"position: absolute; top: 0; left: 0; width: 100%; height: 100%; background-color: rgba(0, 0, 0, 0.4); z-index: 1;\"\u003e\u003c\/div\u003e\n    \u003cdiv style=\"position: relative; z-index: 2; width: 70%; display: flex; flex-direction: column;\"\u003e\n        \u003cp style=\"text-shadow: 2px 2px 6px rgba(0, 0, 0, 0.5);\"\u003eWe want Yellow Speed Racing coilovers to be a manufacturer you can depend on. That's why the Dynamic Pro Sports come with a 24-month limited warranty which guarantees against defects from materials and workmanship.\u003c\/p\u003e\n    \u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eRace Proven\u003c\/h2\u003e\n\u003cdiv style=\"background-image: url('https:\/\/www.tegiwaimports.com\/media\/ysr-desc\/RaceProven.jpg'); background-size: cover; background-position: center; display: flex; justify-content: flex-start; position: relative; color: white; padding: 20px; margin-bottom: 20px; font-size: 0.9rem;\"\u003e\n    \u003cdiv style=\"position: absolute; top: 0; left: 0; width: 100%; height: 100%; background-color: rgba(0, 0, 0, 0.4); z-index: 1;\"\u003e\u003c\/div\u003e\n    \u003cdiv style=\"position: relative; z-index: 2; width: 70%; display: flex; flex-direction: column;\"\u003e\n        \u003cp style=\"text-shadow: 2px 2px 6px rgba(0, 0, 0, 0.5);\"\u003eYellow Speed Racing has been giving race-spec vehicles the platform to win races and compete at the highest levels of motorsport through their suspension systems.\u003c\/p\u003e\n    \u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eMaintenance\u003c\/h2\u003e\n\u003cdiv style=\"background-image: url('https:\/\/www.tegiwaimports.com\/media\/ysr-desc\/Maintenance.jpg'); background-size: cover; background-position: center; display: flex; justify-content: flex-start; position: relative; color: white; padding: 20px; margin-bottom: 20px; font-size: 0.9rem;\"\u003e\n    \u003cdiv style=\"position: absolute; top: 0; left: 0; width: 100%; height: 100%; background-color: rgba(0, 0, 0, 0.4); z-index: 1;\"\u003e\u003c\/div\u003e\n    \u003cdiv style=\"position: relative; z-index: 2; width: 70%; display: flex; flex-direction: column;\"\u003e\n        \u003cp style=\"text-shadow: 2px 2px 6px rgba(0, 0, 0, 0.5);\"\u003eProtect your coilovers with purpose suspension shock sock covers. Made of neoprene\u003c\/p\u003e\n    \u003c\/div\u003e\n\u003c\/div\u003e","brand":"YSR","offers":[{"title":"Default Title","offer_id":47669727330600,"sku":"YS01-MT-DPS034","price":972.96,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/5767\/7352\/files\/ysr-dynamic-pro-sport-coilovers-mitsubishi-gto-90-01-4wd-143.webp?v=1716800589"},{"product_id":"ysr-dynamic-pro-sport-inverted-coilovers-mitsubishi-3000gt-91-99-2wd","title":"YSR Dynamic Pro Sport Inverted Coilovers Mitsubishi 3000Gt 91-99 - 2WD","description":"\u003cp\u003e\u003cspan\u003eOur \u003c\/span\u003e\u003cstrong\u003eInverted Dynamic Pro Sport \u003c\/strong\u003e\u003cspan\u003ecoilovers feature similar characteristics of our popular Dynamic Pro Sport Coilovers, but with a 55mm inverted monotube shock body to increase the strength \u0026amp; comfort of the suspension. We are constantly testing new features, improving our design, and testing these coilovers to make sure that our kit lives up to our customer's expectations. \u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eThis kit features an inverted monotube design to improve vehicle handling and comfort, while increasing the strength of the suspension. These kits offer additional shock fluid capacity to assist with heat dissipation and the larger shock body provides exceptional strength, which prevents premature failure of shafts seals. Our Inverted Dampers feature an aluminum ring seal to resist corrosion and damage from debris by providing a perfect seal.  \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eInverted Pro Street Coilovers are designed to offer a superior ride quality for street driving with exceptional handling \u0026amp; performance for track use.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMONOTUBE INVERTED DESIGN\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eFor suspension systems with front or rear MacPherson style struts, the damper will be provided with an inverted monotube design which is utilized to reduce the effect upon the damping oil and shock piston resulting from high temperature from the brake system. The inverted damper also can resist lateral stress more efficiently. The inverted damper reduces unsprung weight for quicker suspension response. For any suspension system with featuring a rear A-Arm suspension type, the rear damper shaft has been thickened to 20mm, which is able to support more side force stress, and ensure the vehicle will remain more controllable. In addition, the thickened damper shaft is more resistant to damage. The 55mm steel shock body is coated with a zinc plating for exceptional corrosion resistance.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e33 LEVELS OF DAMPING ADJUSTMENT\u003c\/strong\u003e\u003cstrong\u003e\u003cbr\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e1 Way Drift Spec Coilovers feature 33 levels of damping adjustment with the turn of a knob. Rebound \u0026amp; Compression Damping are controlled simultaneously. Inverted Dampers are adjusted from the bottom of the coilover.\u003cstrong\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch4\u003eREAR SUSTECH INVERTED DAMPER DESIGN\u003c\/h4\u003e\n\u003cp\u003eSome vehicle applications are unable to allow damping adjustment on the rear coilovers without coilover removal. With extensive testing \u0026amp; development, we now offer an improved rear dampening adjustment method for these vehicles. The Rear Sustech Inverted damper features a damping dial at the bottom portion of the coilover to allow simple adjustment without the need to remove any components. Sustech Inverted Dampers are included when applicable.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eHigh quality components are adopted to ensure product durability and stability. Each application is test fit and completely road tested to guarantee perfect performance and comfort.\u003c\/span\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"YSR","offers":[{"title":"Aluminum Pillow Ball Upper Mount","offer_id":47679773344040,"sku":"YS01-MT-DPS001-i-AU","price":1114.44,"currency_code":"GBP","in_stock":true},{"title":"Rubber Upper Mount","offer_id":57574848299389,"sku":"YS01-MT-DPS001-i-RU","price":1114.44,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/5767\/7352\/files\/ysr-dynamic-pro-sport-inverted-coilovers-mitsubishi-3000gt-91-99-2wd-691.webp?v=1716803577"},{"product_id":"ysr-dynamic-pro-sport-inverted-coilovers-mitsubishi-3000gt-91-99-4wd","title":"YSR Dynamic Pro Sport Inverted Coilovers Mitsubishi 3000Gt 91-99 - 4WD","description":"\u003cp\u003e\u003cspan\u003eOur \u003c\/span\u003e\u003cstrong\u003eInverted Dynamic Pro Sport \u003c\/strong\u003e\u003cspan\u003ecoilovers feature similar characteristics of our popular Dynamic Pro Sport Coilovers, but with a 55mm inverted monotube shock body to increase the strength \u0026amp; comfort of the suspension. We are constantly testing new features, improving our design, and testing these coilovers to make sure that our kit lives up to our customer's expectations. \u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eThis kit features an inverted monotube design to improve vehicle handling and comfort, while increasing the strength of the suspension. These kits offer additional shock fluid capacity to assist with heat dissipation and the larger shock body provides exceptional strength, which prevents premature failure of shafts seals. Our Inverted Dampers feature an aluminum ring seal to resist corrosion and damage from debris by providing a perfect seal.  \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eInverted Pro Street Coilovers are designed to offer a superior ride quality for street driving with exceptional handling \u0026amp; performance for track use.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMONOTUBE INVERTED DESIGN\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eFor suspension systems with front or rear MacPherson style struts, the damper will be provided with an inverted monotube design which is utilized to reduce the effect upon the damping oil and shock piston resulting from high temperature from the brake system. The inverted damper also can resist lateral stress more efficiently. The inverted damper reduces unsprung weight for quicker suspension response. For any suspension system with featuring a rear A-Arm suspension type, the rear damper shaft has been thickened to 20mm, which is able to support more side force stress, and ensure the vehicle will remain more controllable. In addition, the thickened damper shaft is more resistant to damage. The 55mm steel shock body is coated with a zinc plating for exceptional corrosion resistance.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e33 LEVELS OF DAMPING ADJUSTMENT\u003c\/strong\u003e\u003cstrong\u003e\u003cbr\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e1 Way Drift Spec Coilovers feature 33 levels of damping adjustment with the turn of a knob. Rebound \u0026amp; Compression Damping are controlled simultaneously. Inverted Dampers are adjusted from the bottom of the coilover.\u003cstrong\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch4\u003eREAR SUSTECH INVERTED DAMPER DESIGN\u003c\/h4\u003e\n\u003cp\u003eSome vehicle applications are unable to allow damping adjustment on the rear coilovers without coilover removal. With extensive testing \u0026amp; development, we now offer an improved rear dampening adjustment method for these vehicles. The Rear Sustech Inverted damper features a damping dial at the bottom portion of the coilover to allow simple adjustment without the need to remove any components. Sustech Inverted Dampers are included when applicable.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eHigh quality components are adopted to ensure product durability and stability. Each application is test fit and completely road tested to guarantee perfect performance and comfort.\u003c\/span\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"YSR","offers":[{"title":"Aluminum Pillow Ball Upper Mount","offer_id":47679773442344,"sku":"YS01-MT-DPS002-i-AU","price":1114.44,"currency_code":"GBP","in_stock":true},{"title":"Rubber Upper Mount","offer_id":57574849937789,"sku":"YS01-MT-DPS002-i-RU","price":1114.44,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/5767\/7352\/files\/ysr-dynamic-pro-sport-inverted-coilovers-mitsubishi-3000gt-91-99-4wd-166.webp?v=1716803590"},{"product_id":"ysr-dynamic-pro-sport-inverted-coilovers-mitsubishi-gto-90-01-4wd","title":"YSR Dynamic Pro Sport Inverted Coilovers Mitsubishi Gto 90-01 - 4WD","description":"\u003cp\u003e\u003cspan\u003eOur \u003c\/span\u003e\u003cstrong\u003eInverted Dynamic Pro Sport \u003c\/strong\u003e\u003cspan\u003ecoilovers feature similar characteristics of our popular Dynamic Pro Sport Coilovers, but with a 55mm inverted monotube shock body to increase the strength \u0026amp; comfort of the suspension. We are constantly testing new features, improving our design, and testing these coilovers to make sure that our kit lives up to our customer's expectations. \u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eThis kit features an inverted monotube design to improve vehicle handling and comfort, while increasing the strength of the suspension. These kits offer additional shock fluid capacity to assist with heat dissipation and the larger shock body provides exceptional strength, which prevents premature failure of shafts seals. Our Inverted Dampers feature an aluminum ring seal to resist corrosion and damage from debris by providing a perfect seal.  \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eInverted Pro Street Coilovers are designed to offer a superior ride quality for street driving with exceptional handling \u0026amp; performance for track use.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMONOTUBE INVERTED DESIGN\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eFor suspension systems with front or rear MacPherson style struts, the damper will be provided with an inverted monotube design which is utilized to reduce the effect upon the damping oil and shock piston resulting from high temperature from the brake system. The inverted damper also can resist lateral stress more efficiently. The inverted damper reduces unsprung weight for quicker suspension response. For any suspension system with featuring a rear A-Arm suspension type, the rear damper shaft has been thickened to 20mm, which is able to support more side force stress, and ensure the vehicle will remain more controllable. In addition, the thickened damper shaft is more resistant to damage. The 55mm steel shock body is coated with a zinc plating for exceptional corrosion resistance.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e33 LEVELS OF DAMPING ADJUSTMENT\u003c\/strong\u003e\u003cstrong\u003e\u003cbr\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e1 Way Drift Spec Coilovers feature 33 levels of damping adjustment with the turn of a knob. Rebound \u0026amp; Compression Damping are controlled simultaneously. Inverted Dampers are adjusted from the bottom of the coilover.\u003cstrong\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch4\u003eREAR SUSTECH INVERTED DAMPER DESIGN\u003c\/h4\u003e\n\u003cp\u003eSome vehicle applications are unable to allow damping adjustment on the rear coilovers without coilover removal. With extensive testing \u0026amp; development, we now offer an improved rear dampening adjustment method for these vehicles. The Rear Sustech Inverted damper features a damping dial at the bottom portion of the coilover to allow simple adjustment without the need to remove any components. Sustech Inverted Dampers are included when applicable.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eHigh quality components are adopted to ensure product durability and stability. Each application is test fit and completely road tested to guarantee perfect performance and comfort.\u003c\/span\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"YSR","offers":[{"title":"Aluminum Pillow Ball Upper Mount","offer_id":47679774425384,"sku":"YS01-MT-DPS034-i-AU","price":1114.44,"currency_code":"GBP","in_stock":true},{"title":"Rubber Upper Mount","offer_id":57574849053053,"sku":"YS01-MT-DPS034-i-RU","price":1114.44,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/5767\/7352\/files\/ysr-dynamic-pro-sport-inverted-coilovers-mitsubishi-gto-90-01-4wd-252.webp?v=1716803665"},{"product_id":"ysr-premium-competition-coilovers-mitsubishi-3000gt-91-99-2wd","title":"YSR Premium Competition Coilovers Mitsubishi 3000Gt 91-99 - 2WD","description":"PREMIUM COMPETITION coilovers are designed and developed for use in most motorsports. Through years of competition and testing, we have made uncountable improvements in setup for racing use in order to provide the most durable and competitive damper. Spring rates and shock valving are made for competition to make the vehicle more controlled and balanced. \n\u003cbr\u003e\u003cbr\u003e\nThis suspension system features 33-way dampening adjustment and full length adjustment to accommodate every driver?s needs. The lower mounts are manufactured from lightweight alloy aluminium to reduce unsprung weight. The pillow ball top mounts are used on McPherson struts for maximum handling and performance.\n\n\u003cbr\u003e\u003cbr\u003e\n\u003cstrong\u003e Please note: Premium Competition coilovers are NOT for road use. \u003c\/strong\u003e","brand":"YSR","offers":[{"title":"Default Title","offer_id":47679803523368,"sku":"YS01-MT-PC001","price":1162.55,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/5767\/7352\/files\/ysr-premium-competition-coilovers-mitsubishi-3000gt-91-99-2wd-978.webp?v=1716805581"},{"product_id":"bc-racing-br-series-coilovers-mitsubishi-3000gt-z11a-91-99-fwd","title":"BC Racing BR-Series Coilovers Mitsubishi 3000GT Z11A 91-99 - FWD","description":"\u003cp\u003eThe BR series coilovers use a large 46mm diameter piston in a 53mm diameter damper body to maximise oil capacity.\u003c\/p\u003e\n\u003cp\u003eAs the damper unit operates the oil contained within heats up. The viscosity of oil changes as its temperature varies which can lead to changes in the damping characteristic of the unit.\u003c\/p\u003e\n\u003cp\u003eBC Racing only use a very high quality oil with their coilovers but go that extra mile to maximise performance and build their BR range with a large 53mm diameter damper body. This increases the capacity of the unit which increases the volume of oil contained which in turn reduces the peak temperature and so significantly improves damper performance.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePillowball upper mount\u003c\/li\u003e\n\u003cli\u003eCamber adjustable top mounts\u003c\/li\u003e\n\u003cli\u003eAluminium top plates\u003c\/li\u003e\n\u003cli\u003e30 way adjustable damping\u003c\/li\u003e\n\u003cli\u003eAdjustable spring platform\u003c\/li\u003e\n\u003cli\u003eHeight adjustment via bottom mount to retain full damper travel\u003c\/li\u003e\n\u003cli\u003eBearing mounted upper front spring platform\u003c\/li\u003e\n\u003cli\u003eDust boot to protect damper seals\u003c\/li\u003e\n\u003cli\u003e* some features are dependent on model\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eCorner weight adjustment\u003c\/h2\u003e\n\u003cp\u003eThe lower spring platform of the BC Racing coilovers are adjustable. This allows the car to be set up for corner weighting to achieve perfect balance and ensures that maximum tyre efficiency is achieved.\u003c\/p\u003e\n\u003cp\u003eThe car needs to be placing equal weight on each tyre on an axle so both front tyres need to be taking equal loading as do both rears. This makes sure that both tyres are doing their equal share of work when cornering which increases overall grip, maximises corner speed and reduces lap times.\u003c\/p\u003e\n\u003cp\u003eOptional assister springs can be purchased to allow wheel droop to be dialled into the unit to suit specific needs.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e \u003c\/h2\u003e\n\u003ch2\u003eRide height adjustment\u003c\/h2\u003e\n\u003cp\u003eRide height is determined by the position of the coilover bottom mount. The mount can be wound up and down the damper body to give a full range of adjustment.\u003c\/p\u003e\n\u003cp\u003eBecause ride height is determined by an adjustable bottom mount rather than spring platform you retain full damper travel regardless of the ride height run.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e \u003c\/h2\u003e\n\u003ch2\u003eDamping adjustment\u003c\/h2\u003e\n\u003cp\u003eBR coilovers feature 30 way damping adjustment that combines both rebound and compression in one adjuster for simplicity and ease of use. This adjustable facility allows you to fine tune the vehicle to meet the relevant conditions.\u003c\/p\u003e\n\u003cp\u003eBy tweaking front and rear damping you can adjust the way the car handles. Increasing damping force on the rear relative to the front, for example, will start moving the vehicle into a more oversteer orientated stance.\u003c\/p\u003e\n\u003cp\u003eIf you want to go drag racing in a rear wheel drive car then you want the back of the car to squat off the line to maximise weight transfer to the rear and therefore onto the rear tyres. This maximises traction and helps prevent wheel spin. To achieve this you would soften the rear dampers to allow faster compression. If you had the rear dampers set to hard, as you might run the car on a race track, then the car would be less inclined to squat so traction would be reduced.\u003c\/p\u003e\n\u003cp\u003eConversely, if you want to go drifting and are finding it hard to break traction and are having problems with understeer then making the rear dampers harder will help reduce traction whilst making the front dampers softer will give greater front traction. This will make the rear of the car looser whilst minimising understeer thus altering the vehicles handling characteristics more towards drift than drag, road or track.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e \u003c\/h2\u003e\n\u003ch2\u003ePillowball (rose joint) upper mount\u003c\/h2\u003e\n\u003cp\u003eMany of the BC Racing BR coilovers come with pillowball upper mounts. The mount itself is made from aluminium alloy, anodised and then bead blasted to give a high quality, durable finish.\u003c\/p\u003e\n\u003cp\u003eThe pillowballs themselves are of Japanese manufacture and their solid nature eliminates any flex or play associated with the standard rubber mounts so improving response and handling.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e \u003c\/h2\u003e\n\u003ch2\u003eCamber adjustment\u003c\/h2\u003e\n\u003cp\u003eIf its possible to include camber adjustment on your vehicle then the BC Racing coilovers automatically include camber adjustable aluminium pillowball top mounts. These feature the same high quality Japanese manufactured pillowball but give the added benefit of an adjustable top mount that allows camber to be set to suit your needs be it road, track or drift.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e \u003c\/h2\u003e\n\u003ch2\u003eCorrosion protection\u003c\/h2\u003e\n\u003cp\u003eThe damper units are black chromed steel to give superb durability even through the darkest of European winters. The aluminium components (top mounts, locking collars etc) are anodised and the steel lower mounts go through an electrophoretic disposition process followed by powder coating. A random selection of steel components (brackets, dampers, screws etc) are put through a salt spray test once a month to check the quality of the protective processes and that anti corrosive properties are kept at the highest possible standard.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e \u003c\/h2\u003e\n\u003ch2\u003eHigh quality coil springs\u003c\/h2\u003e\n\u003cp\u003eBC Racing coilovers only use the highest quality steel for their spring manufacturer. They are produced from SAE9254 high strength durable cold wound steel.\u003c\/p\u003e\n\u003cp\u003eThe springs are compression tested through over 500,000 cycles with less that 5% deformation.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e \u003c\/h2\u003e\n\u003ch2\u003ePatented concave lower locking collar\u003c\/h2\u003e\n\u003cp\u003eCoilovers use a locking collar to prevent the bottom mount becoming loose. If the bottom mount becomes loose then the damper body can work its way down into the bottom mount so reducing ride height on that one corner which can lead to dangerous handling characteristics. This is a very common problem for coilovers in general. BC Racing utilise an innovative and patented designed lower locking collar with a bevelled edge that seats into a corresponding bevel in the coilover bottom mount. This vastly increases the surface area that the locking collar works on and so prevents the common and dangerous problem of the locking collars working loose.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e \u003c\/h2\u003e\n\u003ch2\u003eHigh quality oil\u003c\/h2\u003e\n\u003cp\u003eBC Racing dampers use a sophisticated shim stack design and high quality oil to consistently control the compression and rebound speed of the damper rod even under the most extreme conditions.\u003c\/p\u003e\n\u003cp\u003eAs the vehicles travels over rough ground the compression and rebound motion of the damper rod heats the oil. Poor quality dampers use cheap oil whose characteristics alter with varying temperatures. Its vital that high quality oil is used that can maintain consistent viscosity under a wide temperature operating range. Once the oil start to degrade, its properties change leading to damping changes leading to changes in the vehicles handling characteristics.\u003c\/p\u003e\n\u003cp\u003eBC Racing ensures that only high quality oil is used so that damping rates are maintained not only for the moment in hand (i.e. whilst out for a back road blast on or track) but that long term longevity is maximised with oil that doesn't degrade quickly over time thus extending the dampers operating life significantly.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e \u003c\/h2\u003e\n\u003ch2\u003eNitrogen pressurised dampers\u003c\/h2\u003e\n\u003cp\u003eWhen you work a damper hard on track or on high speed bumpy roads you can cause the oil to aerate and cavitation can occour. This causes foaming which effectively reduces the oils viscosity and so reduces the units damping effect. High quality oil goes a long way to help reduce this problem but BC Racing go one step further and pressurise the dampers with nitrogen. The nitrogen exerts a pressure on a floating piston which in turn exerts a permanent pressure on the oil dramatically reducing aeration and so improving the consistency and quality of the damping. The pressurised nitrogen also adds an additional element of effective spring rate to the damper unit.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e \u003c\/h2\u003e\n\u003ch2\u003eBearing mounted upper spring platform\u003c\/h2\u003e\n\u003cp\u003eBecause the spring twists as it compresses it is very important to minimise stiction between the spring and its seats. If this tension is not relieved then spring binding can occur leading to the spring rate effectively altering slightly as the spring compresses and extends. The tension generated can lead to rapid deterioration of the spring pearches and in extreme cases can cause the spring platform and locking collars to loosen. This can lead to the platform and locking collars ‘walking' down the damper resulting in un even ride height and danger of the spring dislocating under full damper extension.\u003c\/p\u003e\n\u003cp\u003eThe friction between spring and seats also has an effect on steering effort as the springs are physically turned with the wheels. This introduces additional unnecessary friction into the steering system which has a knock on detrimental effect on the vehicles handling characteristics.\u003c\/p\u003e\n\u003cp\u003eThe bearing mounted upper spring platform is one of BC Racings innovative designs. By vastly reducing stiction between the spring and its seats the BC Racing units avoid the above problems thus improving the efficiency of the steering system and allowing the spring and damper to work as designed.\u003c\/p\u003e","brand":"BC Racing","offers":[{"title":"Default Title","offer_id":47686865158440,"sku":"BC-0003203","price":1049.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/5767\/7352\/files\/bc-racing-br-series-coilovers-mitsubishi-3000gt-z11a-91-99-fwd-461.webp?v=1716809565"},{"product_id":"bc-racing-br-series-coilovers-mitsubishi-3000gt-z16a-z15a-91-99-awd","title":"BC Racing BR-Series Coilovers Mitsubishi 3000GT Z16A Z15A 91-99 - AWD","description":"\u003cp\u003eThe BR series coilovers use a large 46mm diameter piston in a 53mm diameter damper body to maximise oil capacity.\u003c\/p\u003e\n\u003cp\u003eAs the damper unit operates the oil contained within heats up. The viscosity of oil changes as its temperature varies which can lead to changes in the damping characteristic of the unit.\u003c\/p\u003e\n\u003cp\u003eBC Racing only use a very high quality oil with their coilovers but go that extra mile to maximise performance and build their BR range with a large 53mm diameter damper body. This increases the capacity of the unit which increases the volume of oil contained which in turn reduces the peak temperature and so significantly improves damper performance.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePillowball upper mount\u003c\/li\u003e\n\u003cli\u003eCamber adjustable top mounts\u003c\/li\u003e\n\u003cli\u003eAluminium top plates\u003c\/li\u003e\n\u003cli\u003e30 way adjustable damping\u003c\/li\u003e\n\u003cli\u003eAdjustable spring platform\u003c\/li\u003e\n\u003cli\u003eHeight adjustment via bottom mount to retain full damper travel\u003c\/li\u003e\n\u003cli\u003eBearing mounted upper front spring platform\u003c\/li\u003e\n\u003cli\u003eDust boot to protect damper seals\u003c\/li\u003e\n\u003cli\u003e* some features are dependent on model\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eCorner weight adjustment\u003c\/h2\u003e\n\u003cp\u003eThe lower spring platform of the BC Racing coilovers are adjustable. This allows the car to be set up for corner weighting to achieve perfect balance and ensures that maximum tyre efficiency is achieved.\u003c\/p\u003e\n\u003cp\u003eThe car needs to be placing equal weight on each tyre on an axle so both front tyres need to be taking equal loading as do both rears. This makes sure that both tyres are doing their equal share of work when cornering which increases overall grip, maximises corner speed and reduces lap times.\u003c\/p\u003e\n\u003cp\u003eOptional assister springs can be purchased to allow wheel droop to be dialled into the unit to suit specific needs.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e \u003c\/h2\u003e\n\u003ch2\u003eRide height adjustment\u003c\/h2\u003e\n\u003cp\u003eRide height is determined by the position of the coilover bottom mount. The mount can be wound up and down the damper body to give a full range of adjustment.\u003c\/p\u003e\n\u003cp\u003eBecause ride height is determined by an adjustable bottom mount rather than spring platform you retain full damper travel regardless of the ride height run.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e \u003c\/h2\u003e\n\u003ch2\u003eDamping adjustment\u003c\/h2\u003e\n\u003cp\u003eBR coilovers feature 30 way damping adjustment that combines both rebound and compression in one adjuster for simplicity and ease of use. This adjustable facility allows you to fine tune the vehicle to meet the relevant conditions.\u003c\/p\u003e\n\u003cp\u003eBy tweaking front and rear damping you can adjust the way the car handles. Increasing damping force on the rear relative to the front, for example, will start moving the vehicle into a more oversteer orientated stance.\u003c\/p\u003e\n\u003cp\u003eIf you want to go drag racing in a rear wheel drive car then you want the back of the car to squat off the line to maximise weight transfer to the rear and therefore onto the rear tyres. This maximises traction and helps prevent wheel spin. To achieve this you would soften the rear dampers to allow faster compression. If you had the rear dampers set to hard, as you might run the car on a race track, then the car would be less inclined to squat so traction would be reduced.\u003c\/p\u003e\n\u003cp\u003eConversely, if you want to go drifting and are finding it hard to break traction and are having problems with understeer then making the rear dampers harder will help reduce traction whilst making the front dampers softer will give greater front traction. This will make the rear of the car looser whilst minimising understeer thus altering the vehicles handling characteristics more towards drift than drag, road or track.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e \u003c\/h2\u003e\n\u003ch2\u003ePillowball (rose joint) upper mount\u003c\/h2\u003e\n\u003cp\u003eMany of the BC Racing BR coilovers come with pillowball upper mounts. The mount itself is made from aluminium alloy, anodised and then bead blasted to give a high quality, durable finish.\u003c\/p\u003e\n\u003cp\u003eThe pillowballs themselves are of Japanese manufacture and their solid nature eliminates any flex or play associated with the standard rubber mounts so improving response and handling.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e \u003c\/h2\u003e\n\u003ch2\u003eCamber adjustment\u003c\/h2\u003e\n\u003cp\u003eIf its possible to include camber adjustment on your vehicle then the BC Racing coilovers automatically include camber adjustable aluminium pillowball top mounts. These feature the same high quality Japanese manufactured pillowball but give the added benefit of an adjustable top mount that allows camber to be set to suit your needs be it road, track or drift.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e \u003c\/h2\u003e\n\u003ch2\u003eCorrosion protection\u003c\/h2\u003e\n\u003cp\u003eThe damper units are black chromed steel to give superb durability even through the darkest of European winters. The aluminium components (top mounts, locking collars etc) are anodised and the steel lower mounts go through an electrophoretic disposition process followed by powder coating. A random selection of steel components (brackets, dampers, screws etc) are put through a salt spray test once a month to check the quality of the protective processes and that anti corrosive properties are kept at the highest possible standard.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e \u003c\/h2\u003e\n\u003ch2\u003eHigh quality coil springs\u003c\/h2\u003e\n\u003cp\u003eBC Racing coilovers only use the highest quality steel for their spring manufacturer. They are produced from SAE9254 high strength durable cold wound steel.\u003c\/p\u003e\n\u003cp\u003eThe springs are compression tested through over 500,000 cycles with less that 5% deformation.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e \u003c\/h2\u003e\n\u003ch2\u003ePatented concave lower locking collar\u003c\/h2\u003e\n\u003cp\u003eCoilovers use a locking collar to prevent the bottom mount becoming loose. If the bottom mount becomes loose then the damper body can work its way down into the bottom mount so reducing ride height on that one corner which can lead to dangerous handling characteristics. This is a very common problem for coilovers in general. BC Racing utilise an innovative and patented designed lower locking collar with a bevelled edge that seats into a corresponding bevel in the coilover bottom mount. This vastly increases the surface area that the locking collar works on and so prevents the common and dangerous problem of the locking collars working loose.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e \u003c\/h2\u003e\n\u003ch2\u003eHigh quality oil\u003c\/h2\u003e\n\u003cp\u003eBC Racing dampers use a sophisticated shim stack design and high quality oil to consistently control the compression and rebound speed of the damper rod even under the most extreme conditions.\u003c\/p\u003e\n\u003cp\u003eAs the vehicles travels over rough ground the compression and rebound motion of the damper rod heats the oil. Poor quality dampers use cheap oil whose characteristics alter with varying temperatures. Its vital that high quality oil is used that can maintain consistent viscosity under a wide temperature operating range. Once the oil start to degrade, its properties change leading to damping changes leading to changes in the vehicles handling characteristics.\u003c\/p\u003e\n\u003cp\u003eBC Racing ensures that only high quality oil is used so that damping rates are maintained not only for the moment in hand (i.e. whilst out for a back road blast on or track) but that long term longevity is maximised with oil that doesn't degrade quickly over time thus extending the dampers operating life significantly.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e \u003c\/h2\u003e\n\u003ch2\u003eNitrogen pressurised dampers\u003c\/h2\u003e\n\u003cp\u003eWhen you work a damper hard on track or on high speed bumpy roads you can cause the oil to aerate and cavitation can occour. This causes foaming which effectively reduces the oils viscosity and so reduces the units damping effect. High quality oil goes a long way to help reduce this problem but BC Racing go one step further and pressurise the dampers with nitrogen. The nitrogen exerts a pressure on a floating piston which in turn exerts a permanent pressure on the oil dramatically reducing aeration and so improving the consistency and quality of the damping. The pressurised nitrogen also adds an additional element of effective spring rate to the damper unit.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e \u003c\/h2\u003e\n\u003ch2\u003eBearing mounted upper spring platform\u003c\/h2\u003e\n\u003cp\u003eBecause the spring twists as it compresses it is very important to minimise stiction between the spring and its seats. If this tension is not relieved then spring binding can occur leading to the spring rate effectively altering slightly as the spring compresses and extends. The tension generated can lead to rapid deterioration of the spring pearches and in extreme cases can cause the spring platform and locking collars to loosen. This can lead to the platform and locking collars ‘walking' down the damper resulting in un even ride height and danger of the spring dislocating under full damper extension.\u003c\/p\u003e\n\u003cp\u003eThe friction between spring and seats also has an effect on steering effort as the springs are physically turned with the wheels. This introduces additional unnecessary friction into the steering system which has a knock on detrimental effect on the vehicles handling characteristics.\u003c\/p\u003e\n\u003cp\u003eThe bearing mounted upper spring platform is one of BC Racings innovative designs. By vastly reducing stiction between the spring and its seats the BC Racing units avoid the above problems thus improving the efficiency of the steering system and allowing the spring and damper to work as designed.\u003c\/p\u003e","brand":"BC Racing","offers":[{"title":"Default Title","offer_id":47686865223976,"sku":"BC-0003201","price":1049.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/5767\/7352\/files\/bc-racing-br-series-coilovers-mitsubishi-3000gt-z16a-z15a-91-99-awd-449.webp?v=1716809574"},{"product_id":"bc-racing-br-series-coilovers-mitsubishi-gto-z16a-90-01","title":"BC Racing BR-Series Coilovers Mitsubishi GTO Z16A 90-01","description":"\u003cp\u003eThe BR series coilovers use a large 46mm diameter piston in a 53mm diameter damper body to maximise oil capacity.\u003c\/p\u003e\n\u003cp\u003eAs the damper unit operates the oil contained within heats up. The viscosity of oil changes as its temperature varies which can lead to changes in the damping characteristic of the unit.\u003c\/p\u003e\n\u003cp\u003eBC Racing only use a very high quality oil with their coilovers but go that extra mile to maximise performance and build their BR range with a large 53mm diameter damper body. This increases the capacity of the unit which increases the volume of oil contained which in turn reduces the peak temperature and so significantly improves damper performance.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePillowball upper mount\u003c\/li\u003e\n\u003cli\u003eCamber adjustable top mounts\u003c\/li\u003e\n\u003cli\u003eAluminium top plates\u003c\/li\u003e\n\u003cli\u003e30 way adjustable damping\u003c\/li\u003e\n\u003cli\u003eAdjustable spring platform\u003c\/li\u003e\n\u003cli\u003eHeight adjustment via bottom mount to retain full damper travel\u003c\/li\u003e\n\u003cli\u003eBearing mounted upper front spring platform\u003c\/li\u003e\n\u003cli\u003eDust boot to protect damper seals\u003c\/li\u003e\n\u003cli\u003e* some features are dependent on model\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eCorner weight adjustment\u003c\/h2\u003e\n\u003cp\u003eThe lower spring platform of the BC Racing coilovers are adjustable. This allows the car to be set up for corner weighting to achieve perfect balance and ensures that maximum tyre efficiency is achieved.\u003c\/p\u003e\n\u003cp\u003eThe car needs to be placing equal weight on each tyre on an axle so both front tyres need to be taking equal loading as do both rears. This makes sure that both tyres are doing their equal share of work when cornering which increases overall grip, maximises corner speed and reduces lap times.\u003c\/p\u003e\n\u003cp\u003eOptional assister springs can be purchased to allow wheel droop to be dialled into the unit to suit specific needs.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e \u003c\/h2\u003e\n\u003ch2\u003eRide height adjustment\u003c\/h2\u003e\n\u003cp\u003eRide height is determined by the position of the coilover bottom mount. The mount can be wound up and down the damper body to give a full range of adjustment.\u003c\/p\u003e\n\u003cp\u003eBecause ride height is determined by an adjustable bottom mount rather than spring platform you retain full damper travel regardless of the ride height run.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e \u003c\/h2\u003e\n\u003ch2\u003eDamping adjustment\u003c\/h2\u003e\n\u003cp\u003eBR coilovers feature 30 way damping adjustment that combines both rebound and compression in one adjuster for simplicity and ease of use. This adjustable facility allows you to fine tune the vehicle to meet the relevant conditions.\u003c\/p\u003e\n\u003cp\u003eBy tweaking front and rear damping you can adjust the way the car handles. Increasing damping force on the rear relative to the front, for example, will start moving the vehicle into a more oversteer orientated stance.\u003c\/p\u003e\n\u003cp\u003eIf you want to go drag racing in a rear wheel drive car then you want the back of the car to squat off the line to maximise weight transfer to the rear and therefore onto the rear tyres. This maximises traction and helps prevent wheel spin. To achieve this you would soften the rear dampers to allow faster compression. If you had the rear dampers set to hard, as you might run the car on a race track, then the car would be less inclined to squat so traction would be reduced.\u003c\/p\u003e\n\u003cp\u003eConversely, if you want to go drifting and are finding it hard to break traction and are having problems with understeer then making the rear dampers harder will help reduce traction whilst making the front dampers softer will give greater front traction. This will make the rear of the car looser whilst minimising understeer thus altering the vehicles handling characteristics more towards drift than drag, road or track.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e \u003c\/h2\u003e\n\u003ch2\u003ePillowball (rose joint) upper mount\u003c\/h2\u003e\n\u003cp\u003eMany of the BC Racing BR coilovers come with pillowball upper mounts. The mount itself is made from aluminium alloy, anodised and then bead blasted to give a high quality, durable finish.\u003c\/p\u003e\n\u003cp\u003eThe pillowballs themselves are of Japanese manufacture and their solid nature eliminates any flex or play associated with the standard rubber mounts so improving response and handling.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e \u003c\/h2\u003e\n\u003ch2\u003eCamber adjustment\u003c\/h2\u003e\n\u003cp\u003eIf its possible to include camber adjustment on your vehicle then the BC Racing coilovers automatically include camber adjustable aluminium pillowball top mounts. These feature the same high quality Japanese manufactured pillowball but give the added benefit of an adjustable top mount that allows camber to be set to suit your needs be it road, track or drift.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e \u003c\/h2\u003e\n\u003ch2\u003eCorrosion protection\u003c\/h2\u003e\n\u003cp\u003eThe damper units are black chromed steel to give superb durability even through the darkest of European winters. The aluminium components (top mounts, locking collars etc) are anodised and the steel lower mounts go through an electrophoretic disposition process followed by powder coating. A random selection of steel components (brackets, dampers, screws etc) are put through a salt spray test once a month to check the quality of the protective processes and that anti corrosive properties are kept at the highest possible standard.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e \u003c\/h2\u003e\n\u003ch2\u003eHigh quality coil springs\u003c\/h2\u003e\n\u003cp\u003eBC Racing coilovers only use the highest quality steel for their spring manufacturer. They are produced from SAE9254 high strength durable cold wound steel.\u003c\/p\u003e\n\u003cp\u003eThe springs are compression tested through over 500,000 cycles with less that 5% deformation.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e \u003c\/h2\u003e\n\u003ch2\u003ePatented concave lower locking collar\u003c\/h2\u003e\n\u003cp\u003eCoilovers use a locking collar to prevent the bottom mount becoming loose. If the bottom mount becomes loose then the damper body can work its way down into the bottom mount so reducing ride height on that one corner which can lead to dangerous handling characteristics. This is a very common problem for coilovers in general. BC Racing utilise an innovative and patented designed lower locking collar with a bevelled edge that seats into a corresponding bevel in the coilover bottom mount. This vastly increases the surface area that the locking collar works on and so prevents the common and dangerous problem of the locking collars working loose.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e \u003c\/h2\u003e\n\u003ch2\u003eHigh quality oil\u003c\/h2\u003e\n\u003cp\u003eBC Racing dampers use a sophisticated shim stack design and high quality oil to consistently control the compression and rebound speed of the damper rod even under the most extreme conditions.\u003c\/p\u003e\n\u003cp\u003eAs the vehicles travels over rough ground the compression and rebound motion of the damper rod heats the oil. Poor quality dampers use cheap oil whose characteristics alter with varying temperatures. Its vital that high quality oil is used that can maintain consistent viscosity under a wide temperature operating range. Once the oil start to degrade, its properties change leading to damping changes leading to changes in the vehicles handling characteristics.\u003c\/p\u003e\n\u003cp\u003eBC Racing ensures that only high quality oil is used so that damping rates are maintained not only for the moment in hand (i.e. whilst out for a back road blast on or track) but that long term longevity is maximised with oil that doesn't degrade quickly over time thus extending the dampers operating life significantly.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e \u003c\/h2\u003e\n\u003ch2\u003eNitrogen pressurised dampers\u003c\/h2\u003e\n\u003cp\u003eWhen you work a damper hard on track or on high speed bumpy roads you can cause the oil to aerate and cavitation can occour. This causes foaming which effectively reduces the oils viscosity and so reduces the units damping effect. High quality oil goes a long way to help reduce this problem but BC Racing go one step further and pressurise the dampers with nitrogen. The nitrogen exerts a pressure on a floating piston which in turn exerts a permanent pressure on the oil dramatically reducing aeration and so improving the consistency and quality of the damping. The pressurised nitrogen also adds an additional element of effective spring rate to the damper unit.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e \u003c\/h2\u003e\n\u003ch2\u003eBearing mounted upper spring platform\u003c\/h2\u003e\n\u003cp\u003eBecause the spring twists as it compresses it is very important to minimise stiction between the spring and its seats. If this tension is not relieved then spring binding can occur leading to the spring rate effectively altering slightly as the spring compresses and extends. The tension generated can lead to rapid deterioration of the spring pearches and in extreme cases can cause the spring platform and locking collars to loosen. This can lead to the platform and locking collars ‘walking' down the damper resulting in un even ride height and danger of the spring dislocating under full damper extension.\u003c\/p\u003e\n\u003cp\u003eThe friction between spring and seats also has an effect on steering effort as the springs are physically turned with the wheels. This introduces additional unnecessary friction into the steering system which has a knock on detrimental effect on the vehicles handling characteristics.\u003c\/p\u003e\n\u003cp\u003eThe bearing mounted upper spring platform is one of BC Racings innovative designs. By vastly reducing stiction between the spring and its seats the BC Racing units avoid the above problems thus improving the efficiency of the steering system and allowing the spring and damper to work as designed.\u003c\/p\u003e","brand":"BC Racing","offers":[{"title":"Default Title","offer_id":47686865715496,"sku":"BC-0023314","price":1049.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/5767\/7352\/files\/bc-racing-br-series-coilovers-mitsubishi-gto-z16a-90-01-473.webp?v=1716809625"},{"product_id":"bc-racing-br-series-coilovers-pontiac-gto-vz-04-06","title":"BC Racing BR-Series Coilovers Pontiac GTO VZ 04-06","description":"\u003cp\u003eThe BR series coilovers use a large 46mm diameter piston in a 53mm diameter damper body to maximise oil capacity.\u003c\/p\u003e\n\u003cp\u003eAs the damper unit operates the oil contained within heats up. The viscosity of oil changes as its temperature varies which can lead to changes in the damping characteristic of the unit.\u003c\/p\u003e\n\u003cp\u003eBC Racing only use a very high quality oil with their coilovers but go that extra mile to maximise performance and build their BR range with a large 53mm diameter damper body. This increases the capacity of the unit which increases the volume of oil contained which in turn reduces the peak temperature and so significantly improves damper performance.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePillowball upper mount\u003c\/li\u003e\n\u003cli\u003eCamber adjustable top mounts\u003c\/li\u003e\n\u003cli\u003eAluminium top plates\u003c\/li\u003e\n\u003cli\u003e30 way adjustable damping\u003c\/li\u003e\n\u003cli\u003eAdjustable spring platform\u003c\/li\u003e\n\u003cli\u003eHeight adjustment via bottom mount to retain full damper travel\u003c\/li\u003e\n\u003cli\u003eBearing mounted upper front spring platform\u003c\/li\u003e\n\u003cli\u003eDust boot to protect damper seals\u003c\/li\u003e\n\u003cli\u003e* some features are dependent on model\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eCorner weight adjustment\u003c\/h2\u003e\n\u003cp\u003eThe lower spring platform of the BC Racing coilovers are adjustable. This allows the car to be set up for corner weighting to achieve perfect balance and ensures that maximum tyre efficiency is achieved.\u003c\/p\u003e\n\u003cp\u003eThe car needs to be placing equal weight on each tyre on an axle so both front tyres need to be taking equal loading as do both rears. This makes sure that both tyres are doing their equal share of work when cornering which increases overall grip, maximises corner speed and reduces lap times.\u003c\/p\u003e\n\u003cp\u003eOptional assister springs can be purchased to allow wheel droop to be dialled into the unit to suit specific needs.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e \u003c\/h2\u003e\n\u003ch2\u003eRide height adjustment\u003c\/h2\u003e\n\u003cp\u003eRide height is determined by the position of the coilover bottom mount. The mount can be wound up and down the damper body to give a full range of adjustment.\u003c\/p\u003e\n\u003cp\u003eBecause ride height is determined by an adjustable bottom mount rather than spring platform you retain full damper travel regardless of the ride height run.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e \u003c\/h2\u003e\n\u003ch2\u003eDamping adjustment\u003c\/h2\u003e\n\u003cp\u003eBR coilovers feature 30 way damping adjustment that combines both rebound and compression in one adjuster for simplicity and ease of use. This adjustable facility allows you to fine tune the vehicle to meet the relevant conditions.\u003c\/p\u003e\n\u003cp\u003eBy tweaking front and rear damping you can adjust the way the car handles. Increasing damping force on the rear relative to the front, for example, will start moving the vehicle into a more oversteer orientated stance.\u003c\/p\u003e\n\u003cp\u003eIf you want to go drag racing in a rear wheel drive car then you want the back of the car to squat off the line to maximise weight transfer to the rear and therefore onto the rear tyres. This maximises traction and helps prevent wheel spin. To achieve this you would soften the rear dampers to allow faster compression. If you had the rear dampers set to hard, as you might run the car on a race track, then the car would be less inclined to squat so traction would be reduced.\u003c\/p\u003e\n\u003cp\u003eConversely, if you want to go drifting and are finding it hard to break traction and are having problems with understeer then making the rear dampers harder will help reduce traction whilst making the front dampers softer will give greater front traction. This will make the rear of the car looser whilst minimising understeer thus altering the vehicles handling characteristics more towards drift than drag, road or track.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e \u003c\/h2\u003e\n\u003ch2\u003ePillowball (rose joint) upper mount\u003c\/h2\u003e\n\u003cp\u003eMany of the BC Racing BR coilovers come with pillowball upper mounts. The mount itself is made from aluminium alloy, anodised and then bead blasted to give a high quality, durable finish.\u003c\/p\u003e\n\u003cp\u003eThe pillowballs themselves are of Japanese manufacture and their solid nature eliminates any flex or play associated with the standard rubber mounts so improving response and handling.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e \u003c\/h2\u003e\n\u003ch2\u003eCamber adjustment\u003c\/h2\u003e\n\u003cp\u003eIf its possible to include camber adjustment on your vehicle then the BC Racing coilovers automatically include camber adjustable aluminium pillowball top mounts. These feature the same high quality Japanese manufactured pillowball but give the added benefit of an adjustable top mount that allows camber to be set to suit your needs be it road, track or drift.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e \u003c\/h2\u003e\n\u003ch2\u003eCorrosion protection\u003c\/h2\u003e\n\u003cp\u003eThe damper units are black chromed steel to give superb durability even through the darkest of European winters. The aluminium components (top mounts, locking collars etc) are anodised and the steel lower mounts go through an electrophoretic disposition process followed by powder coating. A random selection of steel components (brackets, dampers, screws etc) are put through a salt spray test once a month to check the quality of the protective processes and that anti corrosive properties are kept at the highest possible standard.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e \u003c\/h2\u003e\n\u003ch2\u003eHigh quality coil springs\u003c\/h2\u003e\n\u003cp\u003eBC Racing coilovers only use the highest quality steel for their spring manufacturer. They are produced from SAE9254 high strength durable cold wound steel.\u003c\/p\u003e\n\u003cp\u003eThe springs are compression tested through over 500,000 cycles with less that 5% deformation.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e \u003c\/h2\u003e\n\u003ch2\u003ePatented concave lower locking collar\u003c\/h2\u003e\n\u003cp\u003eCoilovers use a locking collar to prevent the bottom mount becoming loose. If the bottom mount becomes loose then the damper body can work its way down into the bottom mount so reducing ride height on that one corner which can lead to dangerous handling characteristics. This is a very common problem for coilovers in general. BC Racing utilise an innovative and patented designed lower locking collar with a bevelled edge that seats into a corresponding bevel in the coilover bottom mount. This vastly increases the surface area that the locking collar works on and so prevents the common and dangerous problem of the locking collars working loose.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e \u003c\/h2\u003e\n\u003ch2\u003eHigh quality oil\u003c\/h2\u003e\n\u003cp\u003eBC Racing dampers use a sophisticated shim stack design and high quality oil to consistently control the compression and rebound speed of the damper rod even under the most extreme conditions.\u003c\/p\u003e\n\u003cp\u003eAs the vehicles travels over rough ground the compression and rebound motion of the damper rod heats the oil. Poor quality dampers use cheap oil whose characteristics alter with varying temperatures. Its vital that high quality oil is used that can maintain consistent viscosity under a wide temperature operating range. Once the oil start to degrade, its properties change leading to damping changes leading to changes in the vehicles handling characteristics.\u003c\/p\u003e\n\u003cp\u003eBC Racing ensures that only high quality oil is used so that damping rates are maintained not only for the moment in hand (i.e. whilst out for a back road blast on or track) but that long term longevity is maximised with oil that doesn't degrade quickly over time thus extending the dampers operating life significantly.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e \u003c\/h2\u003e\n\u003ch2\u003eNitrogen pressurised dampers\u003c\/h2\u003e\n\u003cp\u003eWhen you work a damper hard on track or on high speed bumpy roads you can cause the oil to aerate and cavitation can occour. This causes foaming which effectively reduces the oils viscosity and so reduces the units damping effect. High quality oil goes a long way to help reduce this problem but BC Racing go one step further and pressurise the dampers with nitrogen. The nitrogen exerts a pressure on a floating piston which in turn exerts a permanent pressure on the oil dramatically reducing aeration and so improving the consistency and quality of the damping. The pressurised nitrogen also adds an additional element of effective spring rate to the damper unit.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e \u003c\/h2\u003e\n\u003ch2\u003eBearing mounted upper spring platform\u003c\/h2\u003e\n\u003cp\u003eBecause the spring twists as it compresses it is very important to minimise stiction between the spring and its seats. If this tension is not relieved then spring binding can occur leading to the spring rate effectively altering slightly as the spring compresses and extends. The tension generated can lead to rapid deterioration of the spring pearches and in extreme cases can cause the spring platform and locking collars to loosen. This can lead to the platform and locking collars ‘walking' down the damper resulting in un even ride height and danger of the spring dislocating under full damper extension.\u003c\/p\u003e\n\u003cp\u003eThe friction between spring and seats also has an effect on steering effort as the springs are physically turned with the wheels. This introduces additional unnecessary friction into the steering system which has a knock on detrimental effect on the vehicles handling characteristics.\u003c\/p\u003e\n\u003cp\u003eThe bearing mounted upper spring platform is one of BC Racings innovative designs. By vastly reducing stiction between the spring and its seats the BC Racing units avoid the above problems thus improving the efficiency of the steering system and allowing the spring and damper to work as designed.\u003c\/p\u003e","brand":"BC Racing","offers":[{"title":"Default Title","offer_id":47686869156136,"sku":"BC-0008504","price":1049.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/5767\/7352\/files\/bc-racing-br-series-coilovers-pontiac-gto-vz-04-06-388.webp?v=1716809996"},{"product_id":"bc-racing-er-series-coilovers-pontiac-gto-vz-04-06","title":"BC Racing ER-Series Coilovers Pontiac GTO VZ 04-06","description":"\u003cdiv class=\"bc-coilover-Info\"\u003e\n\u003cp\u003eOur External reservoir ER Series comes with separate compression and rebound damping adjustment. The ER Series coilovers bring with them the high quality and unique features seen on the BR and RM type but have the additional benefit of external reservoirs and the ability to allow the end user to individually adjust and set compression and rebound damping rates.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003eExternal reservoir\u003c\/h3\u003e\n\u003cp\u003eThe external reservoir ER Series coilovers allow BC Racing to increase the oil capacity of the damper unit. The additional oil capacity reduces peak oil temperatures which decreases variations in damping rates due to oil viscosity changes. The reduction in damping rate variations improves handling and ultimate on road and track performance.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"bc-coilover-Info\"\u003e\n\u003ch3\u003eSeparate compression and rebound damping adjustment\u003c\/h3\u003e\n\u003cp\u003eBy separating the adjustment for damping compression and rebound the ER Series allows you to dial the vehicle in to your exact needs. When braking hard whilst approaching a corner you want the car to transfer weight to the front tyres to maximise grip for the braking effort and also to allow you to trail brake into the corner without the car understeering.\u003c\/p\u003e\n\u003cp\u003eAs you start to lift off the brakes on corner entry you don't want the suspension to snap back up too quickly as this will remove the loading from the front tyres too quickly and lead to understeer. As soon as the car starts to understeer you need to wind off the steering lock to reduce the work effort applied to the tyres to allow them to regain traction. This slows the vehicles ultimate speed.\u003c\/p\u003e\n\u003cp\u003eThe compression damping adjustment allows you to fine tune the way the car rolls onto its front tyres during braking and the separate rebound adjustment allows you to fine tune the way the car responds as you come off the brakes to enter the corner proper and keep the front end hooked up. This allows you to get back on the power sooner and maximise corner exit speed. Corner exit speed is vital because this determines you maximum speed achieved down the next straight.\u003c\/p\u003e\n\u003ch3\u003eCorner weight adjustment\u003c\/h3\u003e\n\u003cp\u003eThe lower spring platform of the BC Racing coilovers are adjustable. This allows the car to be set up for corner weighting to achieve perfect balance and ensures that maximum tyre efficiency is achieved.\u003c\/p\u003e\n\u003cp\u003eThe car needs to be placing equal weight on each tyre on an axle so both front tyres need to be taking equal loading as do both rears. This makes sure that both tyres are doing their equal share of work when cornering which increases overall grip, maximises corner speed and reduces lap times.\u003c\/p\u003e\n\u003cp\u003eOptional assister springs can be purchased to allow wheel droop to be dialled into the unit to suit specific needs.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003eRide height adjustment\u003c\/h3\u003e\n\u003cp\u003eRide height is determined by the position of the coilover bottom mount. The mount can be wound up and down the damper body to give a full range of adjustment.\u003c\/p\u003e\n\u003cp\u003eBecause ride height is determined by an adjustable bottom mount rather than spring platform you retain full damper travel regardless of the ride height run.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003ePillowball (rose joint) upper mount\u003c\/h3\u003e\n\u003cp\u003eMany of the BC Racing BR coilovers come with pillowball upper mounts. The mount itself is made from aluminium alloy, anodised and then bead blasted to give a high quality, durable finish.\u003c\/p\u003e\n\u003cp\u003eThe pillowballs themselves are of Japanese manufacture and their solid nature eliminates any flex or play associated with the standard rubber mounts so improving response and handling.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003eCamber adjustment\u003c\/h3\u003e\n\u003cp\u003eIf its possible to include camber adjustment on your vehicle then the BC Racing coilovers automatically include camber adjustable aluminium pillowball top mounts. These feature the same high quality Japanese manufactured pillowball but give the added benefit of an adjustable top mount that allows camber to be set to suit your needs be it road, track or drift.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003eCorrosion protection\u003c\/h3\u003e\n\u003cp\u003eThe damper units are black chromed steel to give superb durability even through the darkest of European winters. The aluminium components (top mounts, locking collars etc) are anodised and the steel lower mounts go through an electrophoretic disposition process followed by powder coating. A random selection of steel components (brackets, dampers, screws etc) are put through a salt spray test once a month to check the quality of the protective processes and that anti corrosive properties are kept at the highest possible standard.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003eHigh quality coil springs\u003c\/h3\u003e\n\u003cp\u003eBC Racing coilovers only use the highest quality steel for their spring manufacturer. They are produced from SAE9254 high strength durable cold wound steel.\u003c\/p\u003e\n\u003cp\u003eThe springs are compression tested through over 500,000 cycles with less that 5% deformation.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003ePatented concave lower locking collar\u003c\/h3\u003e\n\u003cp\u003eCoilovers use a locking collar to prevent the bottom mount becoming loose. If the bottom mount becomes loose then the damper body can work its way down into the bottom mount so reducing ride height on that one corner which can lead to dangerous handling characteristics. This is a very common problem for coilovers in general. BC Racing utilise an innovative and patented designed lower locking collar with a bevelled edge that seats into a corresponding bevel in the coilover bottom mount. This vastly increases the surface area that the locking collar works on and so prevents the common and dangerous problem of the locking collars working loose.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003eHigh quality oil\u003c\/h3\u003e\n\u003cp\u003eBC Racing dampers use a sophisticated shim stack design and high quality oil to consistently control the compression and rebound speed of the damper rod even under the most extreme conditions.\u003c\/p\u003e\n\u003cp\u003eAs the vehicles travels over rough ground the compression and rebound motion of the damper rod heats the oil. Poor quality dampers use cheap oil whose characteristics alter with varying temperatures. Its vital that high quality oil is used that can maintain consistent viscosity under a wide temperature operating range. Once the oil start to degrade, its properties change leading to damping changes leading to changes in the vehicles handling characteristics.\u003c\/p\u003e\n\u003cp\u003eBC Racing ensures that only high quality oil is used so that damping rates are maintained not only for the moment in hand (i.e. whilst out for a back road blast on or track) but that long term longevity is maximised with oil that doesn't degrade quickly over time thus extending the dampers operating life significantly.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003eNitrogen pressurised dampers\u003c\/h3\u003e\n\u003cp\u003eWhen you work a damper hard on track or on high speed bumpy roads you can cause the oil to aerate and cavitation can occour. This causes foaming which effectively reduces the oils viscosity and so reduces the units damping effect. High quality oil goes a long way to help reduce this problem but BC Racing go one step further and pressurise the dampers with nitrogen. The nitrogen exerts a pressure on a floating piston which in turn exerts a permanent pressure on the oil dramatically reducing aeration and so improving the consistency and quality of the damping. The pressurised nitrogen also adds an additional element of effective spring rate to the damper unit.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003eBearing mounted upper spring platform\u003c\/h3\u003e\n\u003cp\u003eBecause the spring twists as it compresses it is very important to minimise stiction between the spring and its seats. If this tension is not relieved then spring binding can occur leading to the spring rate effectively altering slightly as the spring compresses and extends. The tension generated can lead to rapid deterioration of the spring pearches and in extreme cases can cause the spring platform and locking collars to loosen. This can lead to the platform and locking collars ‘walking' down the damper resulting in un even ride height and danger of the spring dislocating under full damper extension.\u003c\/p\u003e\n\u003cp\u003eThe friction between spring and seats also has an effect on steering effort as the springs are physically turned with the wheels. This introduces additional unnecessary friction into the steering system which has a knock on detrimental effect on the vehicles handling characteristics.\u003c\/p\u003e\n\u003cp\u003eThe bearing mounted upper spring platform is one of BC Racings innovative designs. By vastly reducing stiction between the spring and its seats the BC Racing units avoid the above problems thus improving the efficiency of the steering system and allowing the spring and damper to work as designed.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"BC Racing","offers":[{"title":"Default Title","offer_id":47686888915240,"sku":"BC-0007579","price":1749.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/5767\/7352\/files\/bc-racing-er-series-coilovers-pontiac-gto-vz-04-06-357.webp?v=1716811432"},{"product_id":"bc-racing-rm-series-coilovers-mitsubishi-3000gt-z16a-z15a-91-99-awd","title":"BC Racing RM-Series Coilovers Mitsubishi 3000GT Z16A Z15A 91-99 - AWD","description":"\u003cul\u003e\n\u003cli\u003eInverted monotube damper bodies\u003c\/li\u003e\n\u003cli\u003ePillowball upper mount\u003c\/li\u003e\n\u003cli\u003eCamber adjustable top mounts\u003c\/li\u003e\n\u003cli\u003eAluminium top plates\u003c\/li\u003e\n\u003cli\u003e30 way adjustable damping\u003c\/li\u003e\n\u003cli\u003eAdjustable spring platform\u003c\/li\u003e\n\u003cli\u003eHeight adjustment via bottom mount to retain full damper travel\u003c\/li\u003e\n\u003cli\u003eBearing mounted upper front spring platform\u003c\/li\u003e\n\u003cli\u003eDust boot to protect damper seals\u003c\/li\u003e\n\u003cli\u003e* some features are dependent on model\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eInverted damper\u003c\/h3\u003e\n\u003cp\u003eThe BC Racing RM series feature high quality damping adjustable monotube inverted dampers at the front or front and rear, depending on vehicle. The RM coilovers offer the majority of the features of the BR series but with the additional benefit of the inverted damper unit. Inverting the damper unit brings with it a number of advantages.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003eReduced unsprung weight\u003c\/h3\u003e\n\u003cp\u003eUnsprung weight is reduced by moving the oil and gas reservoir way from the hub and attaching it to the shell. Unsprung weight is vital to a cars performance as a lighter wheel and hub assembly which readily moves in response to road bumps will have more grip when tracking over an imperfect road. A high unsprung weight can lead to wheel hop over bumpy ground and will reduce the quality of the ride and also untlimate handling as anything that impairs the suspension ability to maintain contact between road and tyre will be of detriment to the cars performance.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003eReduced heat transfer to the gas and oil reservoir\u003c\/h3\u003e\n\u003cp\u003eAny hard driven car with generate a lot of heat within its braking system. This heat is conducted through the hub to the damper unit. By inverting the oil and gas reservoir the oil and gas is moved away from the hub assembly . This reduces the amount of conducted heat being transferred from the braking system to the hub then to the damper and then on to the gas and oil. As the oil and gas is heated its properties change which has a knock on effect on the damping characteristics of the suspension. By keeping the gas and oil temperatures down BC Racing RM coilovers keep damping rates more consistant resulting in better performing suspension and ultimately allowing you to corner faster, which is the bottom line.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003eReduced flex\u003c\/h3\u003e\n\u003cp\u003eThe large 42mm damper rod and inverted design gives the inverted damper units much greater strength and resistance to side loadings. By reducing flex the RM inverted units lead to more consistant steering geometry resulting in more predicatable and responsive handling.\u003c\/p\u003e\n\u003ch3\u003eCorner weight adjustment\u003c\/h3\u003e\n\u003cp\u003eThe lower spring platform of the BC Racing coilovers are adjustable. This allows the car to be set up for corner weighting to achieve perfect balance and ensures that maximum tyre efficiency is achieved.\u003c\/p\u003e\n\u003cp\u003eThe car needs to be placing equal weight on each tyre on an axle so both front tyres need to be taking equal loading as do both rears. This makes sure that both tyres are doing their equal share of work when cornering which increases overall grip, maximises corner speed and reduces lap times.\u003c\/p\u003e\n\u003cp\u003eOptional assister springs can be purchased to allow wheel droop to be dialled into the unit to suit specific needs.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003eRide height adjustment\u003c\/h3\u003e\n\u003cp\u003eRide height is determined by the position of the coilover bottom mount. The mount can be wound up and down the damper body to give a full range of adjustment.\u003c\/p\u003e\n\u003cp\u003eBecause ride height is determined by an adjustable bottom mount rather than spring platform you retain full damper travel regardless of the ride height run.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003eDamping adjustment\u003c\/h3\u003e\n\u003cp\u003eThe RM Series coilovers feature 30 way damping adjustment that combines both rebound and compression in one adjuster for simplicity and ease of use. This adjustable facility allows you to fine tune the vehicle to meet the relevant conditions.\u003c\/p\u003e\n\u003cp\u003eBy tweaking front and rear damping you can adjust the way the car handles. Increasing damping force on the rear relative to the front, for example, will start moving the vehicle into a more oversteer orientated stance.\u003c\/p\u003e\n\u003cp\u003eIf you want to go drag racing in a rear wheel drive car then you want the back of the car to squat off the line to maximise weight transfer to the rear and therefore onto the rear tyres. This maximises traction and helps prevent wheel spin. To achieve this you would soften the rear dampers to allow faster compression. If you had the rear dampers set to hard, as you might run the car on a race track, then the car would be less inclined to squat so traction would be reduced.\u003c\/p\u003e\n\u003cp\u003eConversely, if you want to go drifting and are finding it hard to break traction and are having problems with understeer then making the rear dampers harder will help reduce traction whilst making the front dampers softer will give greater front traction. This will make the rear of the car looser whilst minimising understeer thus altering the vehicles handling characteristics more towards drift than drag, road or track.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003ePillowball (rose joint) upper mount\u003c\/h3\u003e\n\u003cp\u003eMany of the BC Racing RM coilovers come with pillowball upper mounts. The mount itself is made from aluminium alloy, anodised and then bead blasted to give a high quality, durable finish.\u003c\/p\u003e\n\u003cp\u003eThe pillowballs themselves are of Japanese manufacture and their solid nature eliminates any flex or play associated with the standard rubber mounts so improving response and handling.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003eCamber adjustment\u003c\/h3\u003e\n\u003cp\u003eIf its possible to include camber adjustment on your vehicle then the BC Racing coilovers automatically include camber adjustable aluminium pillowball top mounts. These feature the same high quality Japanese manufactured pillowball but give the added benefit of an adjustable top mount that allows camber to be set to suit your needs be it road, track or drift.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003eCorrosion protection\u003c\/h3\u003e\n\u003cp\u003eThe damper units are black chromed steel to give superb durability even through the darkest of European winters. The aluminium components (top mounts, locking collars etc) are anodised and the steel lower mounts go through an electrophoretic disposition process followed by powder coating. A random selection of steel components (brackets, dampers, screws etc) are put through a salt spray test once a month to check the quality of the protective processes and that anti corrosive properties are kept at the highest possible standard.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003eHigh quality coil springs\u003c\/h3\u003e\n\u003cp\u003eBC Racing coilovers only use the highest quality steel for their spring manufacturer. They are produced from SAE9254 high strength durable cold wound steel.\u003c\/p\u003e\n\u003cp\u003eThe springs are compression tested through over 500,000 cycles with less that 5% deformation.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003ePatented concave lower locking collar\u003c\/h3\u003e\n\u003cp\u003eCoilovers use a locking collar to prevent the bottom mount becoming loose. If the bottom mount becomes loose then the damper body can work its way down into the bottom mount so reducing ride height on that one corner which can lead to dangerous handling characteristics. This is a very common problem for coilovers in general. BC Racing utilise an innovative and patented designed lower locking collar with a bevelled edge that seats into a corresponding bevel in the coilover bottom mount. This vastly increases the surface area that the locking collar works on and so prevents the common and dangerous problem of the locking collars working loose.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003eHigh quality oil\u003c\/h3\u003e\n\u003cp\u003eBC Racing dampers use a sophisticated shim stack design and high quality oil to consistently control the compression and rebound speed of the damper rod even under the most extreme conditions.\u003c\/p\u003e\n\u003cp\u003eAs the vehicles travels over rough ground the compression and rebound motion of the damper rod heats the oil. Poor quality dampers use cheap oil whose characteristics alter with varying temperatures. Its vital that high quality oil is used that can maintain consistent viscosity under a wide temperature operating range. Once the oil start to degrade, its properties change leading to damping changes leading to changes in the vehicles handling characteristics.\u003c\/p\u003e\n\u003cp\u003eBC Racing ensures that only high quality oil is used so that damping rates are maintained not only for the moment in hand (i.e. whilst out for a back road blast on or track) but that long term longevity is maximised with oil that doesn’t degrade quickly over time thus extending the dampers operating life significantly.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003eNitrogen pressurised dampers\u003c\/h3\u003e\n\u003cp\u003eWhen you work a damper hard on track or on high speed bumpy roads you can cause the oil to aerate and cavitation can occour. This causes foaming which effectively reduces the oils viscosity and so reduces the units damping effect. High quality oil goes a long way to help reduce this problem but BC Racing go one step further and pressurise the dampers with nitrogen. The nitrogen exerts a pressure on a floating piston which in turn exerts a permanent pressure on the oil dramatically reducing aeration and so improving the consistency and quality of the damping. The pressurised nitrogen also adds an additional element of effective spring rate to the damper unit.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003eBearing mounted upper spring platform\u003c\/h3\u003e\n\u003cp\u003eBecause the spring twists as it compresses it is very important to minimise stiction between the spring and its seats. If this tension is not relieved then spring binding can occur leading to the spring rate effectively altering slightly as the spring compresses and extends. The tension generated can lead to rapid deterioration of the spring pearches and in extreme cases can cause the spring platform and locking collars to loosen. This can lead to the platform and locking collars ‘walking’ down the damper resulting in un even ride height and danger of the spring dislocating under full damper extension.\u003c\/p\u003e\n\u003cp\u003eThe friction between spring and seats also has an effect on steering effort as the springs are physically turned with the wheels. This introduces additional unnecessary friction into the steering system which has a knock on detrimental effect on the vehicles handling characteristics.\u003c\/p\u003e\n\u003cp\u003eThe bearing mounted upper spring platform is one of BC Racings innovative designs. By vastly reducing stiction between the spring and its seats the BC Racing units avoid the above problems thus improving the efficiency of the steering system and allowing the spring and damper to work as designed.\u003c\/p\u003e","brand":"BC Racing","offers":[{"title":"Default Title","offer_id":47694034534696,"sku":"BC-0003333","price":1239.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/5767\/7352\/files\/bc-racing-rm-series-coilovers-mitsubishi-3000gt-z16a-z15a-91-99-awd-123.webp?v=1716812366"},{"product_id":"bc-racing-rm-series-coilovers-mitsubishi-3000gt-z11a-91-99-fwd","title":"BC Racing RM-Series Coilovers Mitsubishi 3000GT Z11A 91-99 - FWD","description":"\u003cul\u003e\n\u003cli\u003eInverted monotube damper bodies\u003c\/li\u003e\n\u003cli\u003ePillowball upper mount\u003c\/li\u003e\n\u003cli\u003eCamber adjustable top mounts\u003c\/li\u003e\n\u003cli\u003eAluminium top plates\u003c\/li\u003e\n\u003cli\u003e30 way adjustable damping\u003c\/li\u003e\n\u003cli\u003eAdjustable spring platform\u003c\/li\u003e\n\u003cli\u003eHeight adjustment via bottom mount to retain full damper travel\u003c\/li\u003e\n\u003cli\u003eBearing mounted upper front spring platform\u003c\/li\u003e\n\u003cli\u003eDust boot to protect damper seals\u003c\/li\u003e\n\u003cli\u003e* some features are dependent on model\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eInverted damper\u003c\/h3\u003e\n\u003cp\u003eThe BC Racing RM series feature high quality damping adjustable monotube inverted dampers at the front or front and rear, depending on vehicle. The RM coilovers offer the majority of the features of the BR series but with the additional benefit of the inverted damper unit. Inverting the damper unit brings with it a number of advantages.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003eReduced unsprung weight\u003c\/h3\u003e\n\u003cp\u003eUnsprung weight is reduced by moving the oil and gas reservoir way from the hub and attaching it to the shell. Unsprung weight is vital to a cars performance as a lighter wheel and hub assembly which readily moves in response to road bumps will have more grip when tracking over an imperfect road. A high unsprung weight can lead to wheel hop over bumpy ground and will reduce the quality of the ride and also untlimate handling as anything that impairs the suspension ability to maintain contact between road and tyre will be of detriment to the cars performance.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003eReduced heat transfer to the gas and oil reservoir\u003c\/h3\u003e\n\u003cp\u003eAny hard driven car with generate a lot of heat within its braking system. This heat is conducted through the hub to the damper unit. By inverting the oil and gas reservoir the oil and gas is moved away from the hub assembly . This reduces the amount of conducted heat being transferred from the braking system to the hub then to the damper and then on to the gas and oil. As the oil and gas is heated its properties change which has a knock on effect on the damping characteristics of the suspension. By keeping the gas and oil temperatures down BC Racing RM coilovers keep damping rates more consistant resulting in better performing suspension and ultimately allowing you to corner faster, which is the bottom line.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003eReduced flex\u003c\/h3\u003e\n\u003cp\u003eThe large 42mm damper rod and inverted design gives the inverted damper units much greater strength and resistance to side loadings. By reducing flex the RM inverted units lead to more consistant steering geometry resulting in more predicatable and responsive handling.\u003c\/p\u003e\n\u003ch3\u003eCorner weight adjustment\u003c\/h3\u003e\n\u003cp\u003eThe lower spring platform of the BC Racing coilovers are adjustable. This allows the car to be set up for corner weighting to achieve perfect balance and ensures that maximum tyre efficiency is achieved.\u003c\/p\u003e\n\u003cp\u003eThe car needs to be placing equal weight on each tyre on an axle so both front tyres need to be taking equal loading as do both rears. This makes sure that both tyres are doing their equal share of work when cornering which increases overall grip, maximises corner speed and reduces lap times.\u003c\/p\u003e\n\u003cp\u003eOptional assister springs can be purchased to allow wheel droop to be dialled into the unit to suit specific needs.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003eRide height adjustment\u003c\/h3\u003e\n\u003cp\u003eRide height is determined by the position of the coilover bottom mount. The mount can be wound up and down the damper body to give a full range of adjustment.\u003c\/p\u003e\n\u003cp\u003eBecause ride height is determined by an adjustable bottom mount rather than spring platform you retain full damper travel regardless of the ride height run.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003eDamping adjustment\u003c\/h3\u003e\n\u003cp\u003eThe RM Series coilovers feature 30 way damping adjustment that combines both rebound and compression in one adjuster for simplicity and ease of use. This adjustable facility allows you to fine tune the vehicle to meet the relevant conditions.\u003c\/p\u003e\n\u003cp\u003eBy tweaking front and rear damping you can adjust the way the car handles. Increasing damping force on the rear relative to the front, for example, will start moving the vehicle into a more oversteer orientated stance.\u003c\/p\u003e\n\u003cp\u003eIf you want to go drag racing in a rear wheel drive car then you want the back of the car to squat off the line to maximise weight transfer to the rear and therefore onto the rear tyres. This maximises traction and helps prevent wheel spin. To achieve this you would soften the rear dampers to allow faster compression. If you had the rear dampers set to hard, as you might run the car on a race track, then the car would be less inclined to squat so traction would be reduced.\u003c\/p\u003e\n\u003cp\u003eConversely, if you want to go drifting and are finding it hard to break traction and are having problems with understeer then making the rear dampers harder will help reduce traction whilst making the front dampers softer will give greater front traction. This will make the rear of the car looser whilst minimising understeer thus altering the vehicles handling characteristics more towards drift than drag, road or track.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003ePillowball (rose joint) upper mount\u003c\/h3\u003e\n\u003cp\u003eMany of the BC Racing RM coilovers come with pillowball upper mounts. The mount itself is made from aluminium alloy, anodised and then bead blasted to give a high quality, durable finish.\u003c\/p\u003e\n\u003cp\u003eThe pillowballs themselves are of Japanese manufacture and their solid nature eliminates any flex or play associated with the standard rubber mounts so improving response and handling.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003eCamber adjustment\u003c\/h3\u003e\n\u003cp\u003eIf its possible to include camber adjustment on your vehicle then the BC Racing coilovers automatically include camber adjustable aluminium pillowball top mounts. These feature the same high quality Japanese manufactured pillowball but give the added benefit of an adjustable top mount that allows camber to be set to suit your needs be it road, track or drift.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003eCorrosion protection\u003c\/h3\u003e\n\u003cp\u003eThe damper units are black chromed steel to give superb durability even through the darkest of European winters. The aluminium components (top mounts, locking collars etc) are anodised and the steel lower mounts go through an electrophoretic disposition process followed by powder coating. A random selection of steel components (brackets, dampers, screws etc) are put through a salt spray test once a month to check the quality of the protective processes and that anti corrosive properties are kept at the highest possible standard.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003eHigh quality coil springs\u003c\/h3\u003e\n\u003cp\u003eBC Racing coilovers only use the highest quality steel for their spring manufacturer. They are produced from SAE9254 high strength durable cold wound steel.\u003c\/p\u003e\n\u003cp\u003eThe springs are compression tested through over 500,000 cycles with less that 5% deformation.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003ePatented concave lower locking collar\u003c\/h3\u003e\n\u003cp\u003eCoilovers use a locking collar to prevent the bottom mount becoming loose. If the bottom mount becomes loose then the damper body can work its way down into the bottom mount so reducing ride height on that one corner which can lead to dangerous handling characteristics. This is a very common problem for coilovers in general. BC Racing utilise an innovative and patented designed lower locking collar with a bevelled edge that seats into a corresponding bevel in the coilover bottom mount. This vastly increases the surface area that the locking collar works on and so prevents the common and dangerous problem of the locking collars working loose.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003eHigh quality oil\u003c\/h3\u003e\n\u003cp\u003eBC Racing dampers use a sophisticated shim stack design and high quality oil to consistently control the compression and rebound speed of the damper rod even under the most extreme conditions.\u003c\/p\u003e\n\u003cp\u003eAs the vehicles travels over rough ground the compression and rebound motion of the damper rod heats the oil. Poor quality dampers use cheap oil whose characteristics alter with varying temperatures. Its vital that high quality oil is used that can maintain consistent viscosity under a wide temperature operating range. Once the oil start to degrade, its properties change leading to damping changes leading to changes in the vehicles handling characteristics.\u003c\/p\u003e\n\u003cp\u003eBC Racing ensures that only high quality oil is used so that damping rates are maintained not only for the moment in hand (i.e. whilst out for a back road blast on or track) but that long term longevity is maximised with oil that doesn’t degrade quickly over time thus extending the dampers operating life significantly.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003eNitrogen pressurised dampers\u003c\/h3\u003e\n\u003cp\u003eWhen you work a damper hard on track or on high speed bumpy roads you can cause the oil to aerate and cavitation can occour. This causes foaming which effectively reduces the oils viscosity and so reduces the units damping effect. High quality oil goes a long way to help reduce this problem but BC Racing go one step further and pressurise the dampers with nitrogen. The nitrogen exerts a pressure on a floating piston which in turn exerts a permanent pressure on the oil dramatically reducing aeration and so improving the consistency and quality of the damping. The pressurised nitrogen also adds an additional element of effective spring rate to the damper unit.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003eBearing mounted upper spring platform\u003c\/h3\u003e\n\u003cp\u003eBecause the spring twists as it compresses it is very important to minimise stiction between the spring and its seats. If this tension is not relieved then spring binding can occur leading to the spring rate effectively altering slightly as the spring compresses and extends. The tension generated can lead to rapid deterioration of the spring pearches and in extreme cases can cause the spring platform and locking collars to loosen. This can lead to the platform and locking collars ‘walking’ down the damper resulting in un even ride height and danger of the spring dislocating under full damper extension.\u003c\/p\u003e\n\u003cp\u003eThe friction between spring and seats also has an effect on steering effort as the springs are physically turned with the wheels. This introduces additional unnecessary friction into the steering system which has a knock on detrimental effect on the vehicles handling characteristics.\u003c\/p\u003e\n\u003cp\u003eThe bearing mounted upper spring platform is one of BC Racings innovative designs. By vastly reducing stiction between the spring and its seats the BC Racing units avoid the above problems thus improving the efficiency of the steering system and allowing the spring and damper to work as designed.\u003c\/p\u003e","brand":"BC Racing","offers":[{"title":"Default Title","offer_id":47694034665768,"sku":"BC-0003335","price":1239.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/5767\/7352\/files\/bc-racing-rm-series-coilovers-mitsubishi-3000gt-z11a-91-99-fwd-810.webp?v=1716812370"},{"product_id":"bc-racing-rm-series-coilovers-mitsubishi-gto-z16a-90-01","title":"BC Racing RM-Series Coilovers Mitsubishi GTO Z16A 90-01","description":"\u003cul\u003e\n\u003cli\u003eInverted monotube damper bodies\u003c\/li\u003e\n\u003cli\u003ePillowball upper mount\u003c\/li\u003e\n\u003cli\u003eCamber adjustable top mounts\u003c\/li\u003e\n\u003cli\u003eAluminium top plates\u003c\/li\u003e\n\u003cli\u003e30 way adjustable damping\u003c\/li\u003e\n\u003cli\u003eAdjustable spring platform\u003c\/li\u003e\n\u003cli\u003eHeight adjustment via bottom mount to retain full damper travel\u003c\/li\u003e\n\u003cli\u003eBearing mounted upper front spring platform\u003c\/li\u003e\n\u003cli\u003eDust boot to protect damper seals\u003c\/li\u003e\n\u003cli\u003e* some features are dependent on model\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eInverted damper\u003c\/h3\u003e\n\u003cp\u003eThe BC Racing RM series feature high quality damping adjustable monotube inverted dampers at the front or front and rear, depending on vehicle. The RM coilovers offer the majority of the features of the BR series but with the additional benefit of the inverted damper unit. Inverting the damper unit brings with it a number of advantages.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003eReduced unsprung weight\u003c\/h3\u003e\n\u003cp\u003eUnsprung weight is reduced by moving the oil and gas reservoir way from the hub and attaching it to the shell. Unsprung weight is vital to a cars performance as a lighter wheel and hub assembly which readily moves in response to road bumps will have more grip when tracking over an imperfect road. A high unsprung weight can lead to wheel hop over bumpy ground and will reduce the quality of the ride and also untlimate handling as anything that impairs the suspension ability to maintain contact between road and tyre will be of detriment to the cars performance.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003eReduced heat transfer to the gas and oil reservoir\u003c\/h3\u003e\n\u003cp\u003eAny hard driven car with generate a lot of heat within its braking system. This heat is conducted through the hub to the damper unit. By inverting the oil and gas reservoir the oil and gas is moved away from the hub assembly . This reduces the amount of conducted heat being transferred from the braking system to the hub then to the damper and then on to the gas and oil. As the oil and gas is heated its properties change which has a knock on effect on the damping characteristics of the suspension. By keeping the gas and oil temperatures down BC Racing RM coilovers keep damping rates more consistant resulting in better performing suspension and ultimately allowing you to corner faster, which is the bottom line.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003eReduced flex\u003c\/h3\u003e\n\u003cp\u003eThe large 42mm damper rod and inverted design gives the inverted damper units much greater strength and resistance to side loadings. By reducing flex the RM inverted units lead to more consistant steering geometry resulting in more predicatable and responsive handling.\u003c\/p\u003e\n\u003ch3\u003eCorner weight adjustment\u003c\/h3\u003e\n\u003cp\u003eThe lower spring platform of the BC Racing coilovers are adjustable. This allows the car to be set up for corner weighting to achieve perfect balance and ensures that maximum tyre efficiency is achieved.\u003c\/p\u003e\n\u003cp\u003eThe car needs to be placing equal weight on each tyre on an axle so both front tyres need to be taking equal loading as do both rears. This makes sure that both tyres are doing their equal share of work when cornering which increases overall grip, maximises corner speed and reduces lap times.\u003c\/p\u003e\n\u003cp\u003eOptional assister springs can be purchased to allow wheel droop to be dialled into the unit to suit specific needs.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003eRide height adjustment\u003c\/h3\u003e\n\u003cp\u003eRide height is determined by the position of the coilover bottom mount. The mount can be wound up and down the damper body to give a full range of adjustment.\u003c\/p\u003e\n\u003cp\u003eBecause ride height is determined by an adjustable bottom mount rather than spring platform you retain full damper travel regardless of the ride height run.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003eDamping adjustment\u003c\/h3\u003e\n\u003cp\u003eThe RM Series coilovers feature 30 way damping adjustment that combines both rebound and compression in one adjuster for simplicity and ease of use. This adjustable facility allows you to fine tune the vehicle to meet the relevant conditions.\u003c\/p\u003e\n\u003cp\u003eBy tweaking front and rear damping you can adjust the way the car handles. Increasing damping force on the rear relative to the front, for example, will start moving the vehicle into a more oversteer orientated stance.\u003c\/p\u003e\n\u003cp\u003eIf you want to go drag racing in a rear wheel drive car then you want the back of the car to squat off the line to maximise weight transfer to the rear and therefore onto the rear tyres. This maximises traction and helps prevent wheel spin. To achieve this you would soften the rear dampers to allow faster compression. If you had the rear dampers set to hard, as you might run the car on a race track, then the car would be less inclined to squat so traction would be reduced.\u003c\/p\u003e\n\u003cp\u003eConversely, if you want to go drifting and are finding it hard to break traction and are having problems with understeer then making the rear dampers harder will help reduce traction whilst making the front dampers softer will give greater front traction. This will make the rear of the car looser whilst minimising understeer thus altering the vehicles handling characteristics more towards drift than drag, road or track.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003ePillowball (rose joint) upper mount\u003c\/h3\u003e\n\u003cp\u003eMany of the BC Racing RM coilovers come with pillowball upper mounts. The mount itself is made from aluminium alloy, anodised and then bead blasted to give a high quality, durable finish.\u003c\/p\u003e\n\u003cp\u003eThe pillowballs themselves are of Japanese manufacture and their solid nature eliminates any flex or play associated with the standard rubber mounts so improving response and handling.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003eCamber adjustment\u003c\/h3\u003e\n\u003cp\u003eIf its possible to include camber adjustment on your vehicle then the BC Racing coilovers automatically include camber adjustable aluminium pillowball top mounts. These feature the same high quality Japanese manufactured pillowball but give the added benefit of an adjustable top mount that allows camber to be set to suit your needs be it road, track or drift.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003eCorrosion protection\u003c\/h3\u003e\n\u003cp\u003eThe damper units are black chromed steel to give superb durability even through the darkest of European winters. The aluminium components (top mounts, locking collars etc) are anodised and the steel lower mounts go through an electrophoretic disposition process followed by powder coating. A random selection of steel components (brackets, dampers, screws etc) are put through a salt spray test once a month to check the quality of the protective processes and that anti corrosive properties are kept at the highest possible standard.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003eHigh quality coil springs\u003c\/h3\u003e\n\u003cp\u003eBC Racing coilovers only use the highest quality steel for their spring manufacturer. They are produced from SAE9254 high strength durable cold wound steel.\u003c\/p\u003e\n\u003cp\u003eThe springs are compression tested through over 500,000 cycles with less that 5% deformation.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003ePatented concave lower locking collar\u003c\/h3\u003e\n\u003cp\u003eCoilovers use a locking collar to prevent the bottom mount becoming loose. If the bottom mount becomes loose then the damper body can work its way down into the bottom mount so reducing ride height on that one corner which can lead to dangerous handling characteristics. This is a very common problem for coilovers in general. BC Racing utilise an innovative and patented designed lower locking collar with a bevelled edge that seats into a corresponding bevel in the coilover bottom mount. This vastly increases the surface area that the locking collar works on and so prevents the common and dangerous problem of the locking collars working loose.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003eHigh quality oil\u003c\/h3\u003e\n\u003cp\u003eBC Racing dampers use a sophisticated shim stack design and high quality oil to consistently control the compression and rebound speed of the damper rod even under the most extreme conditions.\u003c\/p\u003e\n\u003cp\u003eAs the vehicles travels over rough ground the compression and rebound motion of the damper rod heats the oil. Poor quality dampers use cheap oil whose characteristics alter with varying temperatures. Its vital that high quality oil is used that can maintain consistent viscosity under a wide temperature operating range. Once the oil start to degrade, its properties change leading to damping changes leading to changes in the vehicles handling characteristics.\u003c\/p\u003e\n\u003cp\u003eBC Racing ensures that only high quality oil is used so that damping rates are maintained not only for the moment in hand (i.e. whilst out for a back road blast on or track) but that long term longevity is maximised with oil that doesn’t degrade quickly over time thus extending the dampers operating life significantly.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003eNitrogen pressurised dampers\u003c\/h3\u003e\n\u003cp\u003eWhen you work a damper hard on track or on high speed bumpy roads you can cause the oil to aerate and cavitation can occour. This causes foaming which effectively reduces the oils viscosity and so reduces the units damping effect. High quality oil goes a long way to help reduce this problem but BC Racing go one step further and pressurise the dampers with nitrogen. The nitrogen exerts a pressure on a floating piston which in turn exerts a permanent pressure on the oil dramatically reducing aeration and so improving the consistency and quality of the damping. The pressurised nitrogen also adds an additional element of effective spring rate to the damper unit.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003eBearing mounted upper spring platform\u003c\/h3\u003e\n\u003cp\u003eBecause the spring twists as it compresses it is very important to minimise stiction between the spring and its seats. If this tension is not relieved then spring binding can occur leading to the spring rate effectively altering slightly as the spring compresses and extends. The tension generated can lead to rapid deterioration of the spring pearches and in extreme cases can cause the spring platform and locking collars to loosen. This can lead to the platform and locking collars ‘walking’ down the damper resulting in un even ride height and danger of the spring dislocating under full damper extension.\u003c\/p\u003e\n\u003cp\u003eThe friction between spring and seats also has an effect on steering effort as the springs are physically turned with the wheels. This introduces additional unnecessary friction into the steering system which has a knock on detrimental effect on the vehicles handling characteristics.\u003c\/p\u003e\n\u003cp\u003eThe bearing mounted upper spring platform is one of BC Racings innovative designs. By vastly reducing stiction between the spring and its seats the BC Racing units avoid the above problems thus improving the efficiency of the steering system and allowing the spring and damper to work as designed.\u003c\/p\u003e","brand":"BC Racing","offers":[{"title":"Default Title","offer_id":47694035550504,"sku":"BC-0033150","price":1239.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/5767\/7352\/files\/bc-racing-rm-series-coilovers-mitsubishi-gto-z16a-90-01-257.webp?v=1716812422"},{"product_id":"superpro-rear-sway-bar-link-kit-heavy-duty-adjustable-mazda-mx5-mk3-mk4-6-mps","title":"Superpro Rear Sway Bar Link Kit - Heavy Duty Adjustable Mazda MX5 MK3 MK4 6 MPS","description":"\u003cp\u003e10mm Ball Joint Adjustable Link, Minimum Length 100 mm - Maximum Length 120 mm\u003c\/p\u003e\n\n\u003cp\u003e25mm long Thread.\u003c\/p\u003e","brand":"Superpro","offers":[{"title":"Default Title","offer_id":47703696572712,"sku":"TRC1045","price":123.81,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/5767\/7352\/files\/superpro-rear-sway-bar-link-kit-heavy-duty-adjustable-mazda-mx5-mk3-mk4-6-mps-drop-links-899.webp?v=1716818153"},{"product_id":"superpro-rear-sway-bar-link-kit-heavy-duty-adjustable-mitsubishi-3000gt","title":"Superpro Rear Sway Bar Link Kit - Heavy Duty Adjustable Mitsubishi 3000GT","description":"\u003cp\u003e10mm Ball Joint Adjustable Link, Minimum Length 100 mm - Maximum Length 120 mm\u003c\/p\u003e\n\n\u003cp\u003e25mm long Thread.\u003c\/p\u003e","brand":"Superpro","offers":[{"title":"Default Title","offer_id":47703696736552,"sku":"TRC1045","price":123.81,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/5767\/7352\/files\/superpro-rear-sway-bar-link-kit-heavy-duty-adjustable-mitsubishi-3000gt-drop-links-293.webp?v=1716818162"},{"product_id":"hawk-performance-blue-9012-motorsports-brake-pads-front-hb120e-560","title":"HAWK Performance Blue 9012 Motorsports Brake Pads Front - HB120E.560","description":"\u003cdiv\u003e\n\u003cp\u003eDesigned as an entry level endurance compound, there's nothing second-string about Hawk's Blue 9012 race compound. Easier to bed in and delivering excellent pad and rotor life, Blue 9012 is a medium torque pad developed specifically for Road, Rally and Circle Track racing.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003eEndurance Compound\u003c\/li\u003e\n\u003cli\u003eMedium Friction\u003c\/li\u003e\n\u003cli\u003eIntermediate Initial Bite\u003c\/li\u003e\n\u003cli\u003eIncreased Mid-Mu Characteristics\u003c\/li\u003e\n\u003cli\u003e250-1000 Deg F Operating Temperature Range\u003c\/li\u003e\n\u003cli\u003e350-800 Deg F Optimal Temperature Range\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003ch3\u003eHawk Brake Pad Installation Procedure\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eInstall Brake pads properly. Be sure pads are securely positioned in the caliper.\u003c\/li\u003e\n\u003cli\u003eFlush system with fresh brake fluid.\u003c\/li\u003e\n\u003cli\u003eCheck all hydraulic parts for excess wear and tear.\u003c\/li\u003e\n\u003cli\u003eCheck disc for proper thickness, parallelism, and lateral run-out.\u003c\/li\u003e\n\u003cli\u003eCheck disc for scoring or grooves over .012\"\" depth. If either applies, resurfacing or replacement is required.\u003c\/li\u003e\n\u003cli\u003eIf disc does not need resurfacing then contamination from the previous brake pads must be removed. Sand discs with Garnet sandpaper using moderate pressure. Use soap and water to clean off disc surface after sanding and machining. Discs should be free and clear of oil, grease, and brake fluid\u003c\/li\u003e\n\u003cli\u003eInspect calipers for freedom of movement. Lubricate where necessary\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eHawk Brake Pad Bedding Procedure - Motorsports Pads\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAfter reaching medium speed engage brake pedal to slow car without coming to a complete stop. Release pedal quickly and do not drag brakes. Repeat four or five times.\u003c\/li\u003e\n\u003cli\u003eAt higher speeds engage brake pedal to slow car without coming to a complete stop. Release pedal quickly and do not drag brakes. Repeat five times.\u003c\/li\u003e\n\u003cli\u003eAt or near race speed engage brake pedal to slow car without coming to a complete stop. Release pedal quickly and do not drag brakes. Repeat three times. Allow a few seconds between brake engagements while car is in motion.\u003c\/li\u003e\n\u003cli\u003eDo not hold brake pedal. Park car for approximately 20 minutes or until brake rotors are completely cool to the touch.\u003c\/li\u003e\n\u003cli\u003eIf during the above steps the brake pedal becomes soft or brake fade is noticed, park the car immediately for approximately 20 minutes. Do not hold brake pedal.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eImportant Reminders when Burnishing or Bedding Brake Pads\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eDo not attempt to use badly worn or damaged rotors with new brake pads.\u003c\/li\u003e\n\u003cli\u003eDo not drag brakes while car is moving during break-in procedure.\u003c\/li\u003e\n\u003cli\u003eDo not engage pedal while car is stopped at any time following the break-in procedure.\u003c\/li\u003e\n\u003cli\u003eUpon completing the procedure, allow the brake system to completely cool before racing.\u003c\/li\u003e\n\u003cli\u003eApplying the pedal a few times before the start of the race will allow the brake pads to heat up before attempting to reach race speeds.\u003c\/li\u003e\n\u003cli\u003eClean a used rotor surface with fine sand paper or steel wool, rinse with water, dry and install before bedding new pads.\u003c\/li\u003e\n\u003cli\u003eSome forms of racing do not allow time for the proper break-in procedure to be performed. However, it is still very important to attempt to perform at least the core of the procedure: Build up heat slowly and allow the system to completely cool down before racing if possible.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eLimited Lifetime Warranty\u003c\/h3\u003e\n\u003cp\u003eCarlisle Brake \u0026amp; Friction (CBF) warrants Hawk Performance branded products to be free of defects from workmanship and materials. This warranty does not apply to normal wear or damage caused by negligence, lack of maintenance, accident, abnormal operations, or improper installation or service. CBF does not make any other warranty claims, either expressed or implied, including the implied warranties of merchantability or fitness for a particular purpose. In no event will CBF\/Hawk Performance be liable for incidental or consequential damages of any kind, whether such damages are claimed on account of breach of warranty, breach of contract, negligence, or strict product liability. This includes without limitation, damage to property, or other economic losses that may be incurred. Any, and all, warranty claims must be processed through CBF. All valid warranty claims will be replaced and\/or reimbursed with Hawk Performance branded products of equal or greater value.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e* Disclaimer to Limited Life-Time Warranty: Motorsports brake pads and rotors are developed for high performance events. Racing is a dangerous sport. Hawk Performance racing brake pads and rotors are sold without warranty expressed or implied. No warranty or representation is made as to this products ability to protect the user from injury or death. The user assumes that risk.\u003c\/strong\u003e\u003c\/p\u003e","brand":"HAWK Performance","offers":[{"title":"Default Title","offer_id":47780259037480,"sku":"HWK-HB120E.560","price":229.33,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/5767\/7352\/files\/hawk-performance-blue-9012-motorsports-brake-pads-front-hb120e-560-778.webp?v=1716838851"},{"product_id":"hawk-performance-blue-9012-motorsports-brake-pads-front-hb178e-564","title":"HAWK Performance Blue 9012 Motorsports Brake Pads Front - HB178E.564","description":"\u003cdiv\u003e\n\u003cp\u003eDesigned as an entry level endurance compound, there's nothing second-string about Hawk's Blue 9012 race compound. Easier to bed in and delivering excellent pad and rotor life, Blue 9012 is a medium torque pad developed specifically for Road, Rally and Circle Track racing.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003eEndurance Compound\u003c\/li\u003e\n\u003cli\u003eMedium Friction\u003c\/li\u003e\n\u003cli\u003eIntermediate Initial Bite\u003c\/li\u003e\n\u003cli\u003eIncreased Mid-Mu Characteristics\u003c\/li\u003e\n\u003cli\u003e250-1000 Deg F Operating Temperature Range\u003c\/li\u003e\n\u003cli\u003e350-800 Deg F Optimal Temperature Range\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003ch3\u003eHawk Brake Pad Installation Procedure\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eInstall Brake pads properly. Be sure pads are securely positioned in the caliper.\u003c\/li\u003e\n\u003cli\u003eFlush system with fresh brake fluid.\u003c\/li\u003e\n\u003cli\u003eCheck all hydraulic parts for excess wear and tear.\u003c\/li\u003e\n\u003cli\u003eCheck disc for proper thickness, parallelism, and lateral run-out.\u003c\/li\u003e\n\u003cli\u003eCheck disc for scoring or grooves over .012\"\" depth. If either applies, resurfacing or replacement is required.\u003c\/li\u003e\n\u003cli\u003eIf disc does not need resurfacing then contamination from the previous brake pads must be removed. Sand discs with Garnet sandpaper using moderate pressure. Use soap and water to clean off disc surface after sanding and machining. Discs should be free and clear of oil, grease, and brake fluid\u003c\/li\u003e\n\u003cli\u003eInspect calipers for freedom of movement. Lubricate where necessary\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eHawk Brake Pad Bedding Procedure - Motorsports Pads\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAfter reaching medium speed engage brake pedal to slow car without coming to a complete stop. Release pedal quickly and do not drag brakes. Repeat four or five times.\u003c\/li\u003e\n\u003cli\u003eAt higher speeds engage brake pedal to slow car without coming to a complete stop. Release pedal quickly and do not drag brakes. Repeat five times.\u003c\/li\u003e\n\u003cli\u003eAt or near race speed engage brake pedal to slow car without coming to a complete stop. Release pedal quickly and do not drag brakes. Repeat three times. Allow a few seconds between brake engagements while car is in motion.\u003c\/li\u003e\n\u003cli\u003eDo not hold brake pedal. Park car for approximately 20 minutes or until brake rotors are completely cool to the touch.\u003c\/li\u003e\n\u003cli\u003eIf during the above steps the brake pedal becomes soft or brake fade is noticed, park the car immediately for approximately 20 minutes. Do not hold brake pedal.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eImportant Reminders when Burnishing or Bedding Brake Pads\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eDo not attempt to use badly worn or damaged rotors with new brake pads.\u003c\/li\u003e\n\u003cli\u003eDo not drag brakes while car is moving during break-in procedure.\u003c\/li\u003e\n\u003cli\u003eDo not engage pedal while car is stopped at any time following the break-in procedure.\u003c\/li\u003e\n\u003cli\u003eUpon completing the procedure, allow the brake system to completely cool before racing.\u003c\/li\u003e\n\u003cli\u003eApplying the pedal a few times before the start of the race will allow the brake pads to heat up before attempting to reach race speeds.\u003c\/li\u003e\n\u003cli\u003eClean a used rotor surface with fine sand paper or steel wool, rinse with water, dry and install before bedding new pads.\u003c\/li\u003e\n\u003cli\u003eSome forms of racing do not allow time for the proper break-in procedure to be performed. However, it is still very important to attempt to perform at least the core of the procedure: Build up heat slowly and allow the system to completely cool down before racing if possible.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eLimited Lifetime Warranty\u003c\/h3\u003e\n\u003cp\u003eCarlisle Brake \u0026amp; Friction (CBF) warrants Hawk Performance branded products to be free of defects from workmanship and materials. This warranty does not apply to normal wear or damage caused by negligence, lack of maintenance, accident, abnormal operations, or improper installation or service. CBF does not make any other warranty claims, either expressed or implied, including the implied warranties of merchantability or fitness for a particular purpose. In no event will CBF\/Hawk Performance be liable for incidental or consequential damages of any kind, whether such damages are claimed on account of breach of warranty, breach of contract, negligence, or strict product liability. This includes without limitation, damage to property, or other economic losses that may be incurred. Any, and all, warranty claims must be processed through CBF. All valid warranty claims will be replaced and\/or reimbursed with Hawk Performance branded products of equal or greater value.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e* Disclaimer to Limited Life-Time Warranty: Motorsports brake pads and rotors are developed for high performance events. Racing is a dangerous sport. Hawk Performance racing brake pads and rotors are sold without warranty expressed or implied. No warranty or representation is made as to this products ability to protect the user from injury or death. The user assumes that risk.\u003c\/strong\u003e\u003c\/p\u003e","brand":"HAWK Performance","offers":[{"title":"Default Title","offer_id":47780260348200,"sku":"HWK-HB178E.564","price":281.74,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/5767\/7352\/files\/hawk-performance-blue-9012-motorsports-brake-pads-front-hb178e-564-435.webp?v=1716839189"},{"product_id":"hawk-performance-dtc-30-motorsports-brake-pads-front-hb178w-564","title":"HAWK Performance DTC-30 Motorsports Brake Pads Front - HB178W.564","description":"\u003cdiv\u003e\n\u003cp\u003eDTC-30 is a controllable torque, multi-purpose compound, proven effective in a range of series. It delivers superior release characteristics and smooth pedal feel and initial bite for dirt and circle tracks, NASCAR modified, drag racing, trophy trucks, pro buggies, and more.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cp\u003eIn addition to the applications mentioned above, the DTC-30 compound is often used on the rear axle of smaller race vehicles. Competitive racers of the Miata or S2000 will often choose DTC-30 for the rear axle paired with DTC-60 on the front. DTC-30 will also find itself on both axles of street driven vehicles when braking performance is top priority and owner is willing to sacrifice cleanliness and lack of brake noise.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003eConsistent, Smooth Braking\u003c\/li\u003e\n\u003cli\u003eEffective when Cold\u003c\/li\u003e\n\u003cli\u003e100-1200 Deg F Operating Temperature Range\u003c\/li\u003e\n\u003cli\u003e100-800 Deg F Optimal Temperature Range\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eFor motorsport use only. Image is for illustative purposes, actual product may differ.\u003c\/p\u003e\n\u003ch3\u003eHawk Brake Pad Installation Procedure\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eInstall Brake pads properly. Be sure pads are securely positioned in the caliper.\u003c\/li\u003e\n\u003cli\u003eFlush system with fresh brake fluid.\u003c\/li\u003e\n\u003cli\u003eCheck all hydraulic parts for excess wear and tear.\u003c\/li\u003e\n\u003cli\u003eCheck disc for proper thickness, parallelism, and lateral run-out.\u003c\/li\u003e\n\u003cli\u003eCheck disc for scoring or grooves over .012\"\" depth. If either applies, resurfacing or replacement is required.\u003c\/li\u003e\n\u003cli\u003eIf disc does not need resurfacing then contamination from the previous brake pads must be removed. Sand discs with Garnet sandpaper using moderate pressure. Use soap and water to clean off disc surface after sanding and machining. Discs should be free and clear of oil, grease, and brake fluid\u003c\/li\u003e\n\u003cli\u003eInspect calipers for freedom of movement. Lubricate where necessary\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eHawk Brake Pad Bedding Procedure - Motorsports Pads\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAfter reaching medium speed engage brake pedal to slow car without coming to a complete stop. Release pedal quickly and do not drag brakes. Repeat four or five times.\u003c\/li\u003e\n\u003cli\u003eAt higher speeds engage brake pedal to slow car without coming to a complete stop. Release pedal quickly and do not drag brakes. Repeat five times.\u003c\/li\u003e\n\u003cli\u003eAt or near race speed engage brake pedal to slow car without coming to a complete stop. Release pedal quickly and do not drag brakes. Repeat three times. Allow a few seconds between brake engagements while car is in motion.\u003c\/li\u003e\n\u003cli\u003eDo not hold brake pedal. Park car for approximately 20 minutes or until brake rotors are completely cool to the touch.\u003c\/li\u003e\n\u003cli\u003eIf during the above steps the brake pedal becomes soft or brake fade is noticed, park the car immediately for approximately 20 minutes. Do not hold brake pedal.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eImportant Reminders when Burnishing or Bedding Brake Pads\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eDo not attempt to use badly worn or damaged rotors with new brake pads.\u003c\/li\u003e\n\u003cli\u003eDo not drag brakes while car is moving during break-in procedure.\u003c\/li\u003e\n\u003cli\u003eDo not engage pedal while car is stopped at any time following the break-in procedure.\u003c\/li\u003e\n\u003cli\u003eUpon completing the procedure, allow the brake system to completely cool before racing.\u003c\/li\u003e\n\u003cli\u003eApplying the pedal a few times before the start of the race will allow the brake pads to heat up before attempting to reach race speeds.\u003c\/li\u003e\nli\u0026gt;Clean a used rotor surface with fine sand paper or steel wool, rinse with water, dry and install before bedding new pads\n\u003cli\u003eSome forms of racing do not allow time for the proper break-in procedure to be performed. However, it is still very important to attempt to perform at least the core of the procedure: Build up heat slowly and allow the system to completely cool down before racing if possible.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eLimited Lifetime Warranty\u003c\/h3\u003e\n\u003cp\u003eCarlisle Brake \u0026amp; Friction (CBF) warrants Hawk Performance branded products to be free of defects from workmanship and materials. This warranty does not apply to normal wear or damage caused by negligence, lack of maintenance, accident, abnormal operations, or improper installation or service. CBF does not make any other warranty claims, either expressed or implied, including the implied warranties of merchantability or fitness for a particular purpose. In no event will CBF\/Hawk Performance be liable for incidental or consequential damages of any kind, whether such damages are claimed on account of breach of warranty, breach of contract, negligence, or strict product liability. This includes without limitation, damage to property, or other economic losses that may be incurred. Any, and all, warranty claims must be processed through CBF. All valid warranty claims will be replaced and\/or reimbursed with Hawk Performance branded products of equal or greater value.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e* Disclaimer to Limited Life-Time Warranty: Motorsports brake pads and rotors are developed for high performance events. Racing is a dangerous sport. Hawk Performance racing brake pads and rotors are sold without warranty expressed or implied. No warranty or representation is made as to this products ability to protect the user from injury or death. The user assumes that risk.\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/div\u003e","brand":"HAWK Performance","offers":[{"title":"Default Title","offer_id":47787055513896,"sku":"HWK-HB178W.564","price":235.32,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/5767\/7352\/files\/hawk-performance-dtc-30-motorsports-brake-pads-front-hb178w-564-401.webp?v=1716851877"}],"url":"https:\/\/www.tegiwa.com\/collections\/mitsubishi-3000gt-gto-gearbox-differential-clutch-flywheel-drivetrain-upgrades.oembed","provider":"Tegiwa","version":"1.0","type":"link"}