{"title":"Honda Prelude SH Performance Brake Discs, Pads \u0026 Upgrades","description":null,"products":[{"product_id":"grams-performance-injector-kit-honda-b-d-f-h-series-not-d17-86-05","title":"Grams Performance Injector Kit Honda B D F H Series (Not D17) 86-05","description":"Grams Performance is  the most innovative high-performance fuel injectors for today’s performance vehicles. Premium materials, advanced manufacturing techniques, and stringent quality control procedures make Grams Performance the leader in high-performance fuel injectors.\u003cbr\u003e\u003cbr\u003eAn engine’s fuel injectors perform a vital role in the accurate metering and atomization of fuel. Grams Performance accomplishes this with its high-impedance Bosch EV14 fuel injectors that are modified for high-performance use. Each injector is individually balanced, flow tested, and dynamically matched for characterization within one percent of each other. \u003cbr\u003e\u003cbr\u003eThe EV14 injector’s superior ball\/pintle valves combine with Grams Performance precision-modified nozzles allow for consistent performance up to 118 psi, making them suitable for a wide range of applications, yet without exhibiting any of the high-pressure problems often associated with other injectors. The optimized spray pattern also helps improve mixture preparation as well as atomization. Grams Performance injectors are cold cut with diamond grinders in less than three seconds for high performance with pre-seating. Abrasive cutting creates heat, which leads to poor spray patterns and the need for competitors to pre-seat their injectors to reduce distortion. Each injector is also fitted with high-quality Viton O-rings that are resistant to extreme temperatures and harmful oils found in some fuels. \u003cbr\u003e\u003cbr\u003eEach injector set includes dead time compensation values to help ensure consistent air\/fuel ratios and optimal performance when tuning. Grams Performance Fuel Injectors are carefully tested and matched in controlled laboratory environments using state-of-the-art equipment and are subjected to rigorous dyno, street, and racetrack testing to ensure proper performance in the most extreme conditions.","brand":"Grams Performance","offers":[{"title":"550cc","offer_id":47075628187944,"sku":"G2-0550-0500","price":379.6,"currency_code":"GBP","in_stock":true},{"title":"750cc","offer_id":47075628220712,"sku":"G2-0750-0500","price":476.39,"currency_code":"GBP","in_stock":true},{"title":"1000cc","offer_id":47075628253480,"sku":"G2-1000-0500","price":476.39,"currency_code":"GBP","in_stock":true},{"title":"1150cc","offer_id":47075628286248,"sku":"G2-1150-0500","price":486.15,"currency_code":"GBP","in_stock":true},{"title":"1600cc","offer_id":47075628319016,"sku":"G2-1600-0500","price":905.34,"currency_code":"GBP","in_stock":true},{"title":"2200cc","offer_id":47075628351784,"sku":"GP-G2-2200-0500","price":871.72,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/5767\/7352\/files\/grams-performance-injector-kit-honda-b-d-f-h-series-not-d17-86-05-550cc-fuel-injectors-255.webp?v=1749082338"},{"product_id":"acuity-podium-oil-cap-to-fit-most-hondas","title":"Acuity Podium Oil Cap To Fit Most Hondas","description":"\u003cul\u003e\n\u003cli\u003eCompatible with Honda\/Acura B, D, F, H, I, J, K, L \u0026amp; R Series Engines\u003c\/li\u003e\n\u003cli\u003eTurned and milled from 6061-T6 billet aluminum\u003c\/li\u003e\n\u003cli\u003eScalloped exterior profile for easy hand-tightening\u003c\/li\u003e\n\u003cli\u003eCenter hex for easy removal using a socket\u003c\/li\u003e\n\u003cli\u003eCross-drilled holes for easy removal using a screwdriver or metal rod\u003c\/li\u003e\n\u003cli\u003eSatin Anodized Finish for durability\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eEvery gear-head has struggled to remove a stuck oil cap at some point. With cross-holes, a hex, and a unique, easy-to-grip profile, the Podium Oil Cap by ACUiTY is meant to shine when others would leave you in a literal bind. Remove it by hand using the scalloped profile, or for stubborn cases, use a screwdriver in the cross-holes or a socket on the hex to loosen it. With its durable, satin anodized, 6061-T6 billet aluminum construction, an artful design, and surprisingly light weight, it's clear this design is meant to be more than just a beautiful addition to your race car. Attention to detail abounds in this design with subtle features like a dovetailed o-ring retention groove, helpful technical markings, and critically placed fillets to help keep the oil cap looking great even after repeated loosenings using tools.\u003c\/p\u003e\n\u003cp\u003eACUiTY recommends that the Podium Oil Cap be hand-tightened only. The cross-drilled holes and center hex are intended for use during removal only.\u003c\/p\u003e\n\u003cp\u003eFitment:\u003c\/p\u003e\n\u003cp\u003eCompatible with Honda\/Acura B, D, F, H, I, J, K (including direct-injected motors like the K20c etc), L \u0026amp; R Series Engines\u003c\/p\u003e","brand":"Acuity","offers":[{"title":"Satin Black","offer_id":47125282619688,"sku":"ACU-1927-BLK","price":73.21,"currency_code":"GBP","in_stock":true},{"title":"Satin Purple","offer_id":47125282652456,"sku":"ACU-1927-PPL","price":73.21,"currency_code":"GBP","in_stock":true},{"title":"Satin Red","offer_id":47125282685224,"sku":"ACU-1927-RED","price":73.21,"currency_code":"GBP","in_stock":true},{"title":"Satin Teal","offer_id":47125282717992,"sku":"ACU-1927-TEL","price":73.21,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/5767\/7352\/files\/acuity-podium-oil-cap-to-fit-most-hondas-satin-black-engine-dressup-683.webp?v=1750932844"},{"product_id":"acuity-poco-ti-burnt-titanium-low-profile-shift-knob-m10-x-1-5","title":"Acuity POCO-Ti Burnt Titanium Low Profile Shift Knob M10 x 1.5","description":"\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eImportant:\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003eBecause the splatter finish on this product is applied by hand and in a random fashion, the size, location, and distribution of drip and splatter patterns will vary from part to part. The part you order will have blue, purple, and gold colors almost identical to the colors shown in these images, but the exact splatter pattern will naturally vary. Acuity does not permit returns on the basis of the splatter pattern not perfectly matching the product photos on our website.\u003c\/em\u003e\u003c\/p\u003e\n\u003ch4\u003eBrains and Beauty\u003c\/h4\u003e\n\u003cp\u003eACUiTY's POCO-Ti is more than a beautifully finished titanium knob...it can actually reduce your shift throw. While most knobs sit around 25mm (1 inch) or higher above the top of the actual shift lever, the POCO-Ti sits only 3-4mm above the top of the shift lever, leading to 5-10% shorter throws when compared to non-countersunk knobs. The POCO-Ti is one of the most well-integrated countersunk knobs available, with its built-in shift boot collar that easily clips into the knob for that perfect finished appearance.\u003c\/p\u003e\n\u003ch4\u003eMaterials and Finish\u003c\/h4\u003e\n\u003cp\u003eThe POCO-Ti builds on its popular aluminum predecessor by combining a splatter finish titanium outer shell with a stainless steel core to deliver a beautiful, weighted knob that will feel less hot or cold in extreme temperatures while delivering a more tactile shift feel. While an insulated knob is the most forgiving in harsh climates, titanium is more forgiving than aluminum and is heavier than an equivalent aluminum or insulated knob.\u003c\/p\u003e\n\u003cp\u003eThis version of the POCO-Ti features a hand-brushed, burnt blue finish with handcrafted purple and gold splatter accents. The shift boot collar is also titanium and features a burnt finish in blue. An elastomer ring in the knob provides the collar retention feature, similar to our very popular 1924 shift boot collars. All lettering is laser-etched for durability in a burnt gold color.\u003c\/p\u003e\n\u003ch4\u003eIntegrated Boot Collar\u003c\/h4\u003e\n\u003cp\u003eThe POCO-Ti's titanium boot collar is affixed to the shift boot using a low-profile cable tie (3 are supplied with each kit); the knob threads down on the shift lever until it stops. Once both parts are installed, the shift boot collar clips into the shift knob and installation is complete.\u003c\/p\u003e\n\u003ch4\u003eCare Instructions\u003c\/h4\u003e\n\u003cp\u003eOil and dirt that accumulate on the outside of this product will temporarily reduce the vibrance of the colors in its burnt finish. If you find your titanium looking a little lackluster, use a microfiber cloth and some household rubbing alcohol to wipe the outer surfaces down. This will remove oil and dirt deposited on the outer surfaces and will restore the original beauty of the finish. Avoid use when your hands are excessively rough or when you have abrasive materials on them (like sand, dirt, etc), as this can prematurely wear down the splatter finish. Avoid use with rings or similar jewelry as it may scratch the finish. If the finish is ever damaged, ACUiTY may be able to refinish the knob at a lower cost than replacing it; contact us for details.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e(1) POCO-Ti Shift Knob\u003c\/li\u003e\n\u003cli\u003e(1) Titanium Shift Boot Collar\u003c\/li\u003e\n\u003cli\u003e(3) Lay-Flat Cable Ties\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eConfirmed To Fit These Vehicles:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e2002-2005 HONDA Civic (7th Gen, all trims, MT only)\u003c\/li\u003e\n\u003cli\u003e2002-2006 ACURA RSX and RSX-S (all trims with MT, including DC5 Integra)\u003c\/li\u003e\n\u003cli\u003e2002-2006 HONDA CR-V (2nd Gen, MT only)\u003c\/li\u003e\n\u003cli\u003e2003-2007 HONDA Accord (7th Gen, MT only)\u003c\/li\u003e\n\u003cli\u003e2003-2011 HONDA Element (MT only)\u003c\/li\u003e\n\u003cli\u003e2004-2008 ACURA TSX (1st Gen, MT only)\u003c\/li\u003e\n\u003cli\u003e2008-2012 HONDA Accord (8th Gen, all trims, MT only)\u003c\/li\u003e\n\u003cli\u003e2011-2016 HONDA CRZ (MT only)\u003c\/li\u003e\n\u003cli\u003e2009-2011 HONDA Civic (8th Gen, MT only)\u003c\/li\u003e\n\u003cli\u003e2009-2014 HONDA Fit (2nd Gen, MT only)\u003c\/li\u003e\n\u003cli\u003e2009-2014 ACURA TSX (2nd Gen, MT only)\u003c\/li\u003e\n\u003cli\u003e2012-2015 HONDA Civic Si (9th Gen, all trims, MT only)\u003c\/li\u003e\n\u003cli\u003e2012-2017 HONDA Accord (9th Gen, MT only)\u003c\/li\u003e\n\u003cli\u003e2015-2020 HONDA Fit\/Jazz (34d Gen, MT only)\u003c\/li\u003e\n\u003cli\u003e2015-2017 HONDA Civic Type R (9th Gen)\u003c\/li\u003e\n\u003cli\u003e2016-2021 HONDA Civic (10th Gen, all trims, MT only)\u003c\/li\u003e\n\u003cli\u003e2018+ HONDA Accord (10th Gen, MT only)\u003c\/li\u003e\n\u003cli\u003e2022+ HONDA Civic (11th Gen, all trims, MT only)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWILL NOT Fit These Vehicles:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHonda S2000 (all years)\u003c\/li\u003e\n\u003cli\u003e2006-2008 Honda Civic (all trims)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eWILL NOT Fit These Vehicles without modification\u003c\/strong\u003e\u003c\/em\u003e to shifter (two small steel bumps must be filed off the shift lever to clear the collar portion of the POCO):\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e2003-2008 CL7R Accord (all trims with MT)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Acuity","offers":[{"title":"Default Title","offer_id":47125283504424,"sku":"1958-BRN","price":296.04,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/5767\/7352\/files\/acuity-poco-ti-burnt-titanium-low-profile-shift-knob-m10-x-1-5-gear-knobs-729.webp?v=1750932531"},{"product_id":"acuity-esco-ti-shift-knob-in-burnt-titanium-m10-x-1-5","title":"Acuity ESCO-Ti Shift Knob in Burnt Titanium M10 x 1.5","description":"\u003ch4\u003eA Knob with Pedigree\u003c\/h4\u003e\n\u003cp\u003eThe ESCO-Ti is ACUiTY's popular ESCO shape reimagined in beautifully finished 6AL4V titanium. This version of the ESCO-Ti is presented in a burnt brushed finish that fades from blue to purple to gold. ACUiTY's ESCO knob profile has become a favorite among seasoned drivers because of its comfortable shape. With a 40mm (1.57 in) barrel-shaped upper portion, gently domed top, tapered bottom, and 70mm (2.7 in) total height, the ESCO-Ti fits beautifully in most drivers' hands. By forcing a more consistent hand position through its unique shape, the ESCO-Ti helps to train muscle memory, making shifts more consistent.\u003c\/p\u003e\n\u003cp\u003eThe ESCO-Ti is a relatively heavy knob at 310 grams (10.9 oz.), perfect for a great shift feel without masking feedback from the gearbox. Titanium is 65% denser, has 95% lower thermal conductivity, and has 40% lower heat capacity when compared to aluminum, making Titanium knobs more forgiving in climates with harsh temperatures and providing a more weighted feel when compared to aluminum knobs. To complement the ergonomic shape, each knob receives a hand-brushed and hand-colored gold, purple, and blue, burnt finish using an anodizing process borrowed from the medical implant industry. As an added touch, the 6-speed Honda\/Acura gear pattern is laser-etched in a beautiful burnt gold color, and the small ACUiTY logos around the base are similarly laser-etched in a burnt blue color. The finished appearance is simple, classic, and breathtaking. For the best shifting experience, pair your ESCO-Ti knob with ACUiTY's other shifting upgrades for your car.\u003c\/p\u003e\n\u003cp\u003eEach knob also includes a custom-made stainless steel flange nut that can be used to retain the shift knob. If you are using the OEM shift boot collar or one of ACUiTY's 1924 shift boot collars, you will not need to use this flange nut during installation.  Also included is a suede storage bag to protect your shift knob when it's not installed. \u003c\/p\u003e\n\u003ch4\u003eCare Instructions\u003c\/h4\u003e\n\u003cp\u003eOil and dirt that accumulate on the outside of this product will temporarily reduce the vibrance of the colors in its burnt finish. If you find your titanium looking a little lackluster, use a microfiber cloth and some household rubbing alcohol to wipe the outer surfaces down. This will remove oil and dirt deposited on the outer surfaces and will restore the original beauty of the finish. Avoid use when your hands are excessively rough or when you have abrasive materials on them (like sand, dirt, etc.), as this can prematurely wear down the burnt finish. Avoid use with rings or similar jewelry as it may scratch the finish. If the finish is ever damaged, ACUiTY may be able to refinish the knob at a much lower cost than replacing it; contact us for details.\u003c\/p\u003e\n\u003cp\u003eContents\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e(1) ESCO-Ti Shift Knob\u003c\/li\u003e\n\u003cli\u003e(1) Stainless steel flange nut\u003c\/li\u003e\n\u003cli\u003e(1) Suede storage bag\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWill thread onto all M10x1.5 shifters\u003cbr\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAll Hondas and Acuras with Manual transmissions have an M10x1.5 shifter thread.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eImportant Note About Shift Boot Fitment:\u003c\/p\u003e\n\u003cp\u003eOn many Hondas and Acuras made after 2010, the shift boot clips to the underside of the shift knob. Older vehicles had a shift boot that just sat near the underside of the knob, but did not mate to it. If your shift boot clips to the underside of your shift knob, you should check to see if it clips to a nut or to the knob itself. If the boot clips to a nut, your boot and nut should work with your new Esco knob as well. If the boot clips to the actual OEM shift knob, however, you will need additional parts to prevent the boot from sagging after installation. We currently offer 5 shift boot collars that can correct this issue. The part #'s are 1924-K1 (satin black anodized finish), 1924-K2 (turned stainless steel finish), 1924-K4 (satin red anodized finish), 1924-K5 (burnt titanium finish), and 1924-K6 (satin purple anodized finish).\u003c\/p\u003e\n\u003cp\u003eSimilarly, if you have an older vehicle that doesn't have a shift boot that clips to the knob, you can also use the same shift boot collars (1924-K1, 1924-K2, 1924-K3, 1924-K4, and 1924-K5) to clip the boot to the knob for a more modern, clean, finished appearance.\u003c\/p\u003e","brand":"Acuity","offers":[{"title":"Default Title","offer_id":47125283537192,"sku":"1959-BRN","price":253.6,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/5767\/7352\/files\/acuity-esco-ti-shift-knob-in-burnt-titanium-m10-x-1-5-gear-knobs-653.webp?v=1750932597"},{"product_id":"shift-boot-collar-upgrade-m10-x-1-5","title":"Shift Boot Collar Upgrade M10 x 1.5","description":"\u003cp\u003eGone are the days of sagging shift boots, broken plastic shift boot collars, and shift boot collars that don't match the diameter or style of your shift knob. ACUITY designed this Shift Boot Collar Upgrade to allow use of virtually any M10x1.5 shift knob in your Honda without sacrificing fit and finish between the shift boot and shift knob. This kit includes 2 binding nuts, one meant for flat-bottomed knobs, and the other meant for boss-bottomed knobs (like modern Civic Type R and Honda Factory Performance designs). The boot collar is reversible and can be flipped to match your knob's base diameter, whether it be a traditional narrow-bottomed knob (with a 22mm lower diameter) or the newer style wide-bottomed knobs (with a 28mm lower diameter). An integral retaining feature lets you easily pop the boot collar on and off many times without problems, so you no longer have to worry about breaking the OEM plastic boot ring when removing your shift knob. The supplied binding nuts are turned and milled from stainless steel and have flats for a 12mm open-ended wrench. The boot collar is made from 6061 billet aluminum and receives a tasteful anodized\/sandblasted finish before laser etching.\u003c\/p\u003e\n\n\u003cdiv\u003e\u003cem\u003eAlso fits most Honda M10x1.5 shifters. The fitment list above is simply vehicles where we have confirmed fitment\u003c\/em\u003e\u003c\/div\u003e","brand":"Acuity","offers":[{"title":"Satin Black Aluminum","offer_id":47125378367784,"sku":"ACU-1924-K1","price":37.93,"currency_code":"GBP","in_stock":true},{"title":"Turned Stainless","offer_id":47125378400552,"sku":"ACU-1924-K2","price":54.98,"currency_code":"GBP","in_stock":true},{"title":"Satin Red Aluminum","offer_id":47125378433320,"sku":"ACU-1924-K4","price":37.93,"currency_code":"GBP","in_stock":true},{"title":"Burnt Titanium","offer_id":47125378466088,"sku":"ACU-1924-K5","price":103.68,"currency_code":"GBP","in_stock":true},{"title":"Satin Purple Aluminum","offer_id":47125378498856,"sku":"ACU-1924-K6","price":37.93,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/5767\/7352\/files\/shift-boot-collar-upgrade-m10-x-1-5-satin-black-aluminum-gear-knobs-289.webp?v=1749028806"},{"product_id":"acuity-poco-low-profile-shift-knob-m10-x-1-5","title":"Acuity POCO Low-Profile Shift Knob M10 x 1.5","description":"\u003cp\u003eIn recent years, countersunk knobs have become a popular way to achieve shorter shift throws and reduced knob height without modifying the shifter itself. A core problem with most countersunk knobs is that they don't fit well to the shift boot, leaving the shift boot to sag and the shift lever exposed. ACUiTY's POCO knob is the answer with its low height and built-in shift boot collar, the combination of which permits a very low shift knob height combined with a clean fitting shift boot.\u003c\/p\u003e","brand":"Acuity","offers":[{"title":"Satin Black","offer_id":47125378629928,"sku":"ACU-1925-BK","price":94.44,"currency_code":"GBP","in_stock":true},{"title":"Satin Purple","offer_id":47125378662696,"sku":"ACU-1925-PP","price":94.44,"currency_code":"GBP","in_stock":true},{"title":"Satin Red","offer_id":47125378695464,"sku":"ACU-1925-RD","price":94.44,"currency_code":"GBP","in_stock":true},{"title":"Satin Teal","offer_id":47125378728232,"sku":"ACU-1925-TL","price":94.44,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/5767\/7352\/files\/acuity-poco-low-profile-shift-knob-m10-x-1-5-satin-black-gear-knobs-981.webp?v=1750932568"},{"product_id":"acuity-shift-boot-collar-for-poco-shift-knobs","title":"Acuity Shift Boot Collar for POCO Shift Knobs","description":"\u003cul\u003e\n\u003cli\u003e6061 Aluminum construction\u003c\/li\u003e\n\u003cli\u003eSatin anodized finish with laser etching\u003c\/li\u003e\n\u003cli\u003eCompatible with all ACUiTY POCO and POCO-Insulated shift knobs\u003c\/li\u003e\n\u003cli\u003eIncludes 3x lay-flat zip ties for installation\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003eThis collar is for use with ACUiTY POCO and POCO-Insulated shift knobs only. It is not compatible with any other shift knobs or boot collar accessori\u003c\/em\u003ees.\u003c\/p\u003e\n\u003cp\u003eCustomize your POCO or POCO-Insulated shift knob by adding a new, contrasting shift boot collar. This collar is turned from 6061 aluminum and receives a beautiful satin black anodized finish. All markings are laser-etched onto the metal for durability. \u003c\/p\u003e\n\u003cp\u003eThe kit also includes 3x lay-flat cable ties to aid in affixing the collar to your shift boot.\u003c\/p\u003e\n\u003cp\u003eCompatibility\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThis collar is compatible with all ACUiTY POCO and POCO-Insulated shift knobs.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePOCO shift knobs are confirmed to fit these vehicles:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e2002-2005 HONDA Civic (7th Gen, all trims, MT only)\u003c\/li\u003e\n\u003cli\u003e2002-2006 ACURA RSX and RSX-S (all trims with MT, including DC5 Integra)\u003c\/li\u003e\n\u003cli\u003e2002-2006 HONDA CR-V (2nd Gen, MT only)\u003c\/li\u003e\n\u003cli\u003e2003-2007 HONDA Accord (7th Gen, MT only)\u003c\/li\u003e\n\u003cli\u003e2003-2011 HONDA Element (MT only)\u003c\/li\u003e\n\u003cli\u003e2004-2008 ACURA TSX (1st Gen, MT only)\u003c\/li\u003e\n\u003cli\u003e2008-2012 HONDA Accord (8th Gen, K-Series only, MT only)\u003c\/li\u003e\n\u003cli\u003e2011-2016 HONDA CRZ (MT only)\u003c\/li\u003e\n\u003cli\u003e2009-2011 HONDA Civic (8th Gen, MT only)\u003c\/li\u003e\n\u003cli\u003e2009-2014 HONDA Fit (2nd Gen, MT only)\u003c\/li\u003e\n\u003cli\u003e2009-2014 ACURA TSX (2nd Gen, MT only)\u003c\/li\u003e\n\u003cli\u003e2012-2015 HONDA Civic Si (9th Gen, all trims, MT only)\u003c\/li\u003e\n\u003cli\u003e2012-2017 HONDA Accord (9th Gen, MT only)\u003c\/li\u003e\n\u003cli\u003e2015-2020 HONDA Fit\/Jazz (34d Gen, MT only)\u003c\/li\u003e\n\u003cli\u003e2015-2017 HONDA Civic Type R (9th Gen)\u003c\/li\u003e\n\u003cli\u003e2016-2021 HONDA Civic (10th Gen, all trims, MT only)\u003c\/li\u003e\n\u003cli\u003e2018+ HONDA Accord (10th Gen, MT only)\u003c\/li\u003e\n\u003cli\u003e2022+ HONDA Civic (11th Gen, all trims, MT only)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePOCO shift knobs WILL NOT fit these vehicles:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHonda S2000 (all years)\u003c\/li\u003e\n\u003cli\u003e2006-2008 Honda Civic (all trims)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003ePOCO shift knobs WILL NOT fit these vehicles without modification\u003c\/strong\u003e\u003c\/em\u003e to shifter (two small steel bumps must be filed off the shift lever to clear the collar portion of the POCO):\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e2003-2008 CL7R Accord (all trims with mt)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eContents\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e(1) shift boot collar\u003c\/li\u003e\n\u003cli\u003e(3) lay-flat cable ties\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Acuity","offers":[{"title":"Satin Black","offer_id":47125378924840,"sku":"ACU-1925-CLR-BK","price":20.16,"currency_code":"GBP","in_stock":true},{"title":"Satin Purple","offer_id":47125378957608,"sku":"ACU-1925-CLR-PP","price":20.16,"currency_code":"GBP","in_stock":true},{"title":"Satin Red","offer_id":47125378990376,"sku":"ACU-1925-CLR-RD","price":20.16,"currency_code":"GBP","in_stock":true},{"title":"Satin Gold","offer_id":47125379023144,"sku":"ACU-1925-CLR-Ti","price":94.44,"currency_code":"GBP","in_stock":true},{"title":"Satin Teal","offer_id":47125379055912,"sku":"ACU-1925-CLR-TL","price":20.16,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/5767\/7352\/files\/acuity-shift-boot-collar-for-poco-knobs-satin-black-gear-409.webp?v=1750932830"},{"product_id":"acuity-esco-insulated-shift-knob-m10-x-1-5","title":"Acuity ESCO-Insulated Shift Knob M10 x 1.5","description":"\u003cul\u003e\n\u003cli\u003eInsulated design is gentle on the hand in harsh hot\/cold climates\u003c\/li\u003e\n\u003cli\u003eStainless steel core for added weight and strong, durable threads\u003c\/li\u003e\n\u003cli\u003eDurable, hand-filled 6-speed Honda gear pattern is 2+ millimeters deep and will not wear off like printed lettering\u003c\/li\u003e\n\u003cli\u003eESCO shape fits great in the hand with a 40mm diameter and 70mm height and is heavier than most insulated knobs at 185 grams\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe ESCO-Insulated is the rebirth of ACUiTY's original ESCO shift knob design and lends its beauty to a careful combination of handcrafted lettering and finishing techniques and modern multi-axis CNC machining. The ESCO design is quickly becoming the preferred driver's knob due to its carefully-crafted profile. With a 40mm (1.57 in) diameter, barrel-shaped upper portion, gently domed top, tapered bottom, and 70mm (2.7 in) total height, the ESCO-Insulated fits beautifully in most drivers' hands. By forcing a more consistent hand position through its unique shape, the ESCO helps to train muscle memory, making shifts more consistent.\u003c\/p\u003e\n\u003cp\u003eBecause of its stainless steel core, the ESCO-Insulated is heavier than all-plastic insulated designs and has a finished weight of 185 grams (6.5 oz), perfect for a great shift feel without masking feedback from the gearbox. The stainless steel core also means this shift knob has very durable threads when compared to all-plastic shift knobs. As an added touch, the 6-Speed Honda\/Acura gear pattern is engraved into the plastic shell and backfilled, making the lettering deep and durable. The finished appearance of the black insulated shell and white lettering is simple, classic, and breathtaking. For the best shifting experience, pair your ESCO-Insulated knob with ACUiTY's other shifting upgrades for your car.\u003c\/p\u003e\n\u003cp\u003eEach knob also includes a custom-made stainless steel flange nut that can be used to retain the shift knob. If you are using the OEM shift boot collar or one of ACUiTY's 1924 shift boot collars, you will not need to use this flange nut during installation. Also included is a suede storage bag to protect your shift knob when it's not installed. \u003c\/p\u003e\n\u003cp\u003eContents\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e(1) ESCO-Insulated Shift Knob\u003c\/li\u003e\n\u003cli\u003e(1) Stainless steel flange nut\u003c\/li\u003e\n\u003cli\u003e(1) Suede storage bag\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWill thread onto all M10x1.5 shifters\u003cbr\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAll Hondas and Acuras with Manual transmissions have an M10x1.5 shifter thread.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eImportant Note About Shift Boot Fitment:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eOn many Hondas and Acuras made after 2010, the shift boot clips to the underside of the shift knob. Older vehicles had a shift boot that just sat near the underside of the knob, but did not mate to it. If your shift boot clips to the underside of your shift knob, you should check to see if it clips to a nut or to the knob itself. If the boot clips to a nut, your boot and nut should work with your new Esco knob as well. If the boot clips to the actual OEM shift knob, however, you will need additional parts to prevent the boot from sagging after installation. We currently offer 5 shift boot collars that can correct this issue. The part #'s are 1924-K1 (satin black anodized finish), 1924-K2 (turned stainless steel finish), 1924-K4 (satin red anodized finish), 1924-K5 (burnt titanium finish), and 1924-K6 (satin purple anodized finish).\u003c\/p\u003e\n\u003cp\u003eSimilarly, if you have an older vehicle that doesn't have a shift boot that clips to the knob, you can also use the same shift boot collars (1924-K1, 1924-K2, 1924-K3, 1924-K4, and 1924-K5) to clip the boot to the knob for a more modern, clean, finished appearance.\u003c\/p\u003e","brand":"Acuity","offers":[{"title":"Black","offer_id":47125381021992,"sku":"ACU-1947-BLK","price":147.49,"currency_code":"GBP","in_stock":true},{"title":"White","offer_id":47125381054760,"sku":"ACU-1947-WHT","price":147.49,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/5767\/7352\/files\/acuity-esco-insulated-shift-knob-m10-x-1-5-black-gear-knobs-428.webp?v=1750932834"},{"product_id":"acuity-poco-insulated-low-profile-shift-knob-m10-x-1-5","title":"Acuity POCO Insulated Low-Profile Shift Knob M10 x 1.5","description":"\u003cul\u003e\n\u003cli\u003eAcetal outer shell prevents the knob from feeling too hot or cold\u003c\/li\u003e\n\u003cli\u003eStainless steel core for durability and added weight\u003c\/li\u003e\n\u003cli\u003eSits very low and typically reduces shift throw by 5%-10% compared to most other knobs\u003c\/li\u003e\n\u003cli\u003eDetachable aluminum shift boot collar tastefully connects the shift boot to the knob and allows easy removal\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eWith its low-profile, reduced shift throw, clean shift boot integration, and insulated outer shell, the POCO-Insulated makes for an excellent driving experience. In recent years, countersunk knobs have become a popular way to achieve shorter shift throws and reduced knob height without modifying the shifter itself. A core problem with most countersunk knobs is that they don't fit well to the shift boot, leaving the shift boot to sag and the shift lever exposed. ACUiTY's POCO knob is the answer with its low height and built-in shift boot collar, the combination of which permits a very low shift knob height combined with a clean fitting shift boot.\u003c\/p\u003e\n\u003ch3\u003eWhat to Expect\u003c\/h3\u003e\n\u003cp\u003eACUiTY's POCO knobs sit low, much lower than most stock and aftermarket knobs. Most knobs sit around 25mm (1 inch) or higher above the top of the actual shift lever. The POCO sits only 3-4mm taller than the top of the shift lever when mounted. The POCO's low profile means shifts will feel shorter and firmer with throws typically 5%-10% shorter than compared to non-countersunk knobs. The POCO is one of the most well-integrated countersunk knobs available with its built-in shift boot collar that easily clips into the knob for that perfect finished appearance.\u003c\/p\u003e\n\u003cp\u003eThe POCO-Insulated builds on its predecessor by combining an insulated acetal outer shell with a stainless steel core to deliver a weighted knob that is gentle on the hand even in very hot or cold weather.\u003c\/p\u003e\n\u003ch3\u003eHow it Works\u003c\/h3\u003e\n\u003cp\u003eThe POCO's boot collar is affixed to the shift boot using a low-profile cable tie (3 are supplied with each kit); the knob threads down on the shift lever until it stops. Once both parts are installed, the shift boot collar clips into the shift knob and installation is complete.\u003c\/p\u003e\n\u003ch3\u003eMaterials and Finish\u003c\/h3\u003e\n\u003cp\u003eEach POCO-Insulated features a heavy, stainless steel inner core and an insulated acetal outer shell in a tasteful, hand-turned finish. The shift boot collar is aluminum and features a satin black anodized finish. An elastomer ring in the knob provides the collar retention feature, similar to our very popular 1924 shift boot collars. All lettering is laser-etched for durability.\u003c\/p\u003e\n\u003cp\u003eContents\u003c\/p\u003e\n\u003ch3\u003eContents\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e(1) POCO-Insulated Shift Knob\u003c\/li\u003e\n\u003cli\u003e(1) Aluminum Shift Boot Collar in Satin Black Finish\u003c\/li\u003e\n\u003cli\u003e(3) Lay-Flat Cable Ties\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eFitment\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eConfirmed To Fit These Vehicles:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e2002-2005 HONDA Civic (7th Gen, all trims, MT only)\u003c\/li\u003e\n\u003cli\u003e2002-2006 ACURA RSX and RSX-S (all trims with MT, including DC5 Integra)\u003c\/li\u003e\n\u003cli\u003e2002-2006 HONDA CR-V (2nd Gen, MT only)\u003c\/li\u003e\n\u003cli\u003e2003-2007 HONDA Accord (7th Gen, MT only)\u003c\/li\u003e\n\u003cli\u003e2003-2011 HONDA Element (MT only)\u003c\/li\u003e\n\u003cli\u003e2004-2008 ACURA TSX (1st Gen, MT only)\u003c\/li\u003e\n\u003cli\u003e2008-2012 HONDA Accord (8th Gen, all trims, MT only)\u003c\/li\u003e\n\u003cli\u003e2011-2016 HONDA CRZ (MT only)\u003c\/li\u003e\n\u003cli\u003e2009-2011 HONDA Civic (8th Gen, MT only)\u003c\/li\u003e\n\u003cli\u003e2009-2014 HONDA Fit (2nd Gen, MT only)\u003c\/li\u003e\n\u003cli\u003e2009-2014 ACURA TSX (2nd Gen, MT only)\u003c\/li\u003e\n\u003cli\u003e2012-2015 HONDA Civic Si (9th Gen, all trims, MT only)\u003c\/li\u003e\n\u003cli\u003e2012-2017 HONDA Accord (9th Gen, MT only)\u003c\/li\u003e\n\u003cli\u003e2015-2020 HONDA Fit\/Jazz (34d Gen, MT only)\u003c\/li\u003e\n\u003cli\u003e2015-2017 HONDA Civic Type R (9th Gen)\u003c\/li\u003e\n\u003cli\u003e2016-2021 HONDA Civic (10th Gen, all trims, MT only)\u003c\/li\u003e\n\u003cli\u003e2018+ HONDA Accord (10th Gen, MT only)\u003c\/li\u003e\n\u003cli\u003e2022+ HONDA Civic (11th Gen, all trims, MT only)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWILL NOT Fit These Vehicles:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHonda S2000 (all years)\u003c\/li\u003e\n\u003cli\u003e2006-2008 Honda Civic (all trims)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eWILL NOT Fit These Vehicles without modification\u003c\/strong\u003e\u003c\/em\u003e to shifter (two small steel bumps must be filed off the shift lever to clear the collar portion of the POCO):\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e2003-2008 CL7R Accord (all trims with mt)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Acuity","offers":[{"title":"Black","offer_id":47125381153064,"sku":"ACU-1952-BLK","price":115.66,"currency_code":"GBP","in_stock":true},{"title":"White","offer_id":47125381185832,"sku":"ACU-1952-WHT","price":115.66,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/5767\/7352\/files\/acuity-poco-insulated-low-profile-shift-knob-m10-x-1-5-black-gear-knobs-557.webp?v=1750932744"},{"product_id":"ngk-spark-plugs-honda-accord-ch-prelude-bb-sh-2-2-h22a-x4","title":"NGK Spark Plugs Honda Accord CH Prelude BB SH 2.2 H22A x4","description":"\u003cp\u003e\u003cstrong\u003eNGK Spark Plugs Honda Accord CH Prelude BB SH 2.2 H22A x4\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eNGK Spark Plugs are one of the leading automotive and technical ceramic suppliers in the world.\u003cbr\u003e\nFounded in 1936, NGK Spark Plugs have always developed ceramics at the core of its business.\u003c\/p\u003e\n\n\u003cp\u003eOver the years, the company has successfully developed and applied its expertise to create other products of significant value.\u003c\/p\u003e\n\n\u003cp\u003eWith over 80 years of experience, NGK Spark Plugs is a global market leader of spark plugs, glow plugs, lambda sensors as well as other ignition parts and vehicle electronics.\u003c\/p\u003e\n\n\u003cp\u003eHeadquartered in Nagoya, Japan, NGK Spark Plugs have production facilities and sales organisations all around the world with more than 14,500 employees worldwide.\u003c\/p\u003e\n\n\u003cp\u003eNGK Spark Plugs are present on all continents and have 41 group companies, 24 production plants, and five technical centres.\u003c\/p\u003e\n\n\u003cp\u003eThis worldwide presence makes NGK Spark Plugs a global leader and first choice for spark plugs.\u003c\/p\u003e\n\n\u003cp\u003e \u003c\/p\u003e","brand":"NGK","offers":[{"title":"Laser Platinum (OEM)","offer_id":47253184741672,"sku":"NGK-PZFR6F-11-4","price":71.0,"currency_code":"GBP","in_stock":true},{"title":"Iridium IX (Upgraded)","offer_id":47253184774440,"sku":"NGK-IZFR6F11-4","price":79.78,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/5767\/7352\/files\/ngk-spark-plugs-honda-accord-ch-prelude-bb-sh-2-h22a-x4-coilpacks-leads-732.webp?v=1750370110"},{"product_id":"skunk2-viton-valve-stem-seal-kit-honda","title":"Skunk2 Viton Valve Stem Seal Kit Honda","description":"\u003cp\u003eSkunk2’s Viton Valve Stem Seals for all popular Honda engines using a 5.5mm valve stem are designed to provide exceptional lubrication while keeping oil out of the combustion chamber. Only Viton is able to provide precise oil control and maximum durability, even at high rpm. Unlike OEM Honda valve stem seals that use different materials for both intake and exhaust seals, all Skunk2 seals exceed OEM specifications and are manufactured from high-quality Viton. Each seal also features stiffer retaining springs for a precise fit. The results are a seal that’s resistant to extreme heat, oil additives, and abrasion.\u003c\/p\u003e\n\n\u003cp\u003eHigh-quality valve stem seals are vital to an engine’s performance and longevity. Skunk2’s Viton Valve Stem Seals ensure that each valve stem remains properly lubricated without allowing oil into the combustion chamber.\u003c\/p\u003e","brand":"Skunk2 Racing","offers":[{"title":"Default Title","offer_id":47253878997288,"sku":"312-05-0100","price":41.39,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/5767\/7352\/files\/skunk2-viton-valve-stem-seal-kit-honda-cams-valvetrain-796.webp?v=1748982862"},{"product_id":"skunk2-honda-keepers-locks","title":"Skunk2 Honda Keepers Locks","description":"\u003cp\u003eSkunk2 Valve Keepers for Honda B16, B17, B18, D15, D16, F20B, F20C, F22C, H22A, K20, and K24 VTEC engines are manufactured from chromoly bar stock and CNC machined for a precise fit and finish. Skunk2 Keepers are heat-treated for ultimate strength and black oxide coated for corrosion resistance.\u003c\/p\u003e","brand":"Skunk2 Racing","offers":[{"title":"Default Title","offer_id":47253879030056,"sku":"312-05-0150","price":86.24,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/5767\/7352\/files\/skunk2-honda-keepers-locks-cams-valvetrain-887.webp?v=1749572116"},{"product_id":"skunk2-billet-oil-cap-honda","title":"Skunk2 Billet Oil Cap Honda","description":"\u003cp\u003eSkunk2’s Fine Tuning products and accessories, like its Polished Billet Oil Caps for most Honda and Acura engines, help put the finishing touches onto your vehicle you work so hard to make perform well. Consistent with Skunk2’s racing heritage and high-performance parts manufacturing practices, each Polished Billet Oil Cap is precision CNC machined and features a durable, fully polished finish. Skunk2’s Polished Billet Oil Caps feature an 33mm x 2.8mm thread pitch, are compatible with most Honda valve covers, and feature a contrasting, acid-etched Skunk2 logo for the ultimate finishing touch.\u003c\/p\u003e","brand":"Skunk2 Racing","offers":[{"title":"Silver","offer_id":47253883846952,"sku":"626-99-0070","price":62.3,"currency_code":"GBP","in_stock":true},{"title":"Black","offer_id":47253883879720,"sku":"626-99-0071","price":62.3,"currency_code":"GBP","in_stock":true},{"title":"Gunmetal","offer_id":47253883912488,"sku":"626-99-0072","price":62.3,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/5767\/7352\/files\/skunk2-billet-oil-cap-honda-silver-engine-bay-371.webp?v=1749207264"},{"product_id":"skunk2-billet-oil-cap-25th-anniversary-honda","title":"Skunk2 Billet Oil Cap 25th Anniversary Honda","description":"\u003cp\u003eSkunk2’s Fine Tuning products and accessories, like its Polished Billet Oil Caps for most Honda and Acura engines, help put the finishing touches onto your vehicle you work so hard to make perform well. Consistent with Skunk2’s racing heritage and high-performance parts manufacturing practices, each Polished Billet Oil Cap is precision CNC machined and features a durable, fully polished finish. Skunk2’s Polished Billet Oil Caps feature an 33mm x 2.8mm thread pitch, are compatible with most Honda valve covers, and feature a contrasting, acid-etched Skunk2 logo for the ultimate finishing touch.\u003c\/p\u003e","brand":"Skunk2 Racing","offers":[{"title":"Silver","offer_id":47253883945256,"sku":"SK2-626-99-0080","price":71.52,"currency_code":"GBP","in_stock":false},{"title":"Black","offer_id":47253883978024,"sku":"SK2-626-99-0081","price":71.52,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/5767\/7352\/files\/skunk2-billet-oil-cap-25th-anniversary-honda-silver-engine-bay-564.webp?v=1749572243"},{"product_id":"skunk2-gear-knob-shift-10mm-x-1-5mm-honda","title":"Skunk2 Gear Knob Shift 10mm x 1.5mm Honda","description":"\u003cp\u003eSkunk2’s Fine Tuning products and accessories, like its billet Shift Knobs for six-speed Honda's, help put the finishing touches onto your vehicle you work so hard to make perform well.\u003c\/p\u003e\n\n\u003cp\u003eConsistent with Skunk2’s racing heritage and high-performance parts manufacturing practices, each Skunk2 Shift Knob is machined from high-quality, billet stainless steel and features a PVD titanium coating that’s designed to resist scratching and wear. Skunk2 Shift Knobs are also custom weighted to 440 grams which helps promote smoother, more positive shifting, suitable for all forms of racing and street applications. Don’t be fooled by less expensive imitations; only Skunk2 Shift Knobs feature a true titanium finish and are precision machined to exacting standards.\u003c\/p\u003e","brand":"Skunk2 Racing","offers":[{"title":"5 Speed","offer_id":47253884010792,"sku":"627-99-0080","price":75.88,"currency_code":"GBP","in_stock":true},{"title":"6 Speed","offer_id":47253884043560,"sku":"627-99-0081","price":75.88,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/5767\/7352\/files\/skunk2-gear-knob-shift-10mm-x-1-5mm-honda-5-speed-knobs-931.webp?v=1749028810"},{"product_id":"pci-racing-aluminium-side-skirts-honda-prelude-bb6-97-01","title":"PCI Racing Aluminium Side Skirts Honda Prelude BB6 97-01","description":"\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eDurable Aluminum Construction:\u003c\/strong\u003e These side skirts are crafted from high-quality aluminum, ensuring they are strong and lightweight. This construction provides durability for daily driving and the potential for racing applications.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eEnhanced Aerodynamics:\u003c\/strong\u003e The width of these side skirts is designed to improve your vehicle's aerodynamics. They help manage airflow, reduce air turbulence, and can contribute to better stability and handling, especially at higher speeds.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eCustomized Appearance:\u003c\/strong\u003e These side skirts feature a unique design that adds a sporty and personalized look to your Honda, enhancing its overall aesthetics.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eStraightforward Installation:\u003c\/strong\u003e The side skirts are engineered for a relatively easy installation process. Installing them typically involves basic hand tools and some vehicle modifications.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e These side skirts are specifically designed to fit your Vehicle, ensuring a secure and seamless fit.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e","brand":"Pro Car Innovations","offers":[{"title":"4\"","offer_id":47268352852264,"sku":"PCI-SS-BB6-4","price":347.26,"currency_code":"GBP","in_stock":true},{"title":"5\"","offer_id":47268352885032,"sku":"PCI-SS-BB6-5","price":367.86,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/5767\/7352\/files\/pci-racing-aluminium-side-skirts-honda-prelude-bb6-97-01-4-bumpers-body-kits-189.webp?v=1745087048"},{"product_id":"mishimoto-performance-aluminum-fan-shroud-kit-honda-prelude-97-01","title":"Mishimoto Performance Aluminum Fan Shroud Kit Honda Prelude 97-01","description":"\u003cp\u003eThe Mishimoto aluminum fan shroud kit will considerably improve engine cooling functions and the overall performance of your vehicle.All Mishimoto fan shrouds are significantly lighter than standard fan shrouds and are a direct OEM fit.A Mishimoto fan shroud will effectively drive heat out of the engine bay and deliver a significant amount of cool air to your radiator.The fan shroud also serves another very important purpose: securing the fan blades.The fan shroud will keep the fan blades in place, which otherwise could potentially damage other essential components in your engine.\u003c\/p\u003e","brand":"Mishimoto","offers":[{"title":"Default Title","offer_id":47317008056616,"sku":"MMFS-PRE-97","price":212.4,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/5767\/7352\/files\/mishimoto-performance-aluminum-fan-shroud-kit-honda-prelude-97-01-fans-728.webp?v=1749573073"},{"product_id":"mishimoto-performance-aluminum-radiator-honda-prelude-97-01","title":"Mishimoto Performance Aluminum Radiator Honda Prelude 97-01","description":"\u003cp\u003eA Mishimoto performance aluminum radiator is the ideal upgrade to the stock Honda radiator.Designed and engineered to maximize cooling efficiency, boost engine functions and most importantly protect your car from overheating.Whether you're a daily driver or you take your car to the track, installing an upgraded radiator is essential if you want to lower your risk of engine failure.The Mishimoto performance aluminum radiator features a lightweight dual core, 100-percent brazed aluminum, and polished end tanks which will enhance the overall performance of your engine.Every Mishimoto aluminum radiator is a direct OEM fit, making installation effortless with no cutting or modification required.All Mishimoto radiators come with a high pressure 1.3 bar Mishimoto radiator cap and a great warranty.A perfect match to the fan shroud kit.This kit will fit the Honda Prelude, Accord and Honda CL.\u003c\/p\u003e","brand":"Mishimoto","offers":[{"title":"Default Title","offer_id":47317171405096,"sku":"MMRAD-PRE-97","price":279.6,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/5767\/7352\/files\/mishimoto-performance-aluminum-radiator-honda-prelude-97-01-radiators-915.webp?v=1749574619"},{"product_id":"mfactory-final-drive-honda-prelude-h22a-f20b","title":"MFactory Final Drive Honda Prelude H22A F20B","description":"\u003cp\u003eAchieve the ultimate in acceleration with the MFactory Final Drive Gears. By changing your final gear ratios, you can experience a dramatic increase in acceleration, giving you on average, a 10-15% increase in torque throughout the entire rev-range over the OEM Final Drive.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDiamond Cut to exacting tolerances from Forged High-Nickel-Chromium-Molybdenum Steel\u003c\/strong\u003e\u003cbr\u003ePerfect fitment \u0026amp; finish ensures hassle-free installation \u0026amp; maintenance, each and every time\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDesigned using leading-edge Solidworks 3D CAD \u0026amp; Cosmos FEA software\u003c\/strong\u003e\u003cbr\u003eAdvanced Gear Geometry minimizes parasitic drivetrain losses. Race transmissions built with MFactory components transfer, on average, 1-2% more power to the ground over our competitors!\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMade from imported Japanese SAE 8620 and 4320 Steel\u003c\/li\u003e\n\u003cli\u003eForged, Double Tempered and Super Sub-Zero treated for unsurpassed toughness\u003c\/li\u003e\n\u003cli\u003eAdvanced Shot Peening technology increases surface hardness\u003c\/li\u003e\n\u003cli\u003eAdvanced gear geometry designed using industry-leading software puts more power to the ground\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eFitment Notes\u003c\/strong\u003e \u003cstrong\u003eHonda B16A2 Fitments:\u003c\/strong\u003e Will not fit models equipped with Factory LSD\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eHonda B16A2\/16B\/18C Fitments:\u003c\/strong\u003e Offering a revised design over our previous generation Final Drive Gears. Forged from stronger steel with a 50% larger tooth profile yet almost 1kg lighter!\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eHonda Cable Fitments:\u003c\/strong\u003e Will not fit models equipped with Factory LSD. 92-93 YS1 transmissions should use B16A2 fitments\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eHonda '98 Spec Fitments:\u003c\/strong\u003e Designed for the '98 Spec Integra Type-R with Factory 4.785 Final Drive\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eHonda H22A Fitments:\u003c\/strong\u003e Will not fit ATTS-equipped transmissions. Is also suitable for Euro-R\/Accord Type-R\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFor Ford Focus MTX-75:\u003c\/strong\u003e Designed for 2002+ Transmission Only. Will only fit applications using the 1pc Pinion (Removable 3rd \u0026amp; 4th Gear)\u003c\/p\u003e","brand":"MFactory","offers":[{"title":"5.15","offer_id":47317776498984,"sku":"MF-TRS-02H52-1","price":834.18,"currency_code":"GBP","in_stock":true},{"title":"4.64","offer_id":47317776531752,"sku":"MF-TRS-02H46-1","price":666.76,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/5767\/7352\/files\/mfactory-final-drive-honda-prelude-h22a-f20b-5-15-gears-drives-993.webp?v=1716469637"},{"product_id":"mfactory-final-drive-honda-accord-h22a-f20b","title":"MFactory Final Drive Honda Accord H22A F20B","description":"\u003cp\u003eAchieve the ultimate in acceleration with the MFactory Final Drive Gears. By changing your final gear ratios, you can experience a dramatic increase in acceleration, giving you on average, a 10-15% increase in torque throughout the entire rev-range over the OEM Final Drive.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDiamond Cut to exacting tolerances from Forged High-Nickel-Chromium-Molybdenum Steel\u003c\/strong\u003e\u003cbr\u003ePerfect fitment \u0026amp; finish ensures hassle-free installation \u0026amp; maintenance, each and every time\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDesigned using leading-edge Solidworks 3D CAD \u0026amp; Cosmos FEA software\u003c\/strong\u003e\u003cbr\u003eAdvanced Gear Geometry minimizes parasitic drivetrain losses. Race transmissions built with MFactory components transfer, on average, 1-2% more power to the ground over our competitors!\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMade from imported Japanese SAE 8620 and 4320 Steel\u003c\/li\u003e\n\u003cli\u003eForged, Double Tempered and Super Sub-Zero treated for unsurpassed toughness\u003c\/li\u003e\n\u003cli\u003eAdvanced Shot Peening technology increases surface hardness\u003c\/li\u003e\n\u003cli\u003eAdvanced gear geometry designed using industry-leading software puts more power to the ground\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eFitment Notes\u003c\/strong\u003e \u003cstrong\u003eHonda B16A2 Fitments:\u003c\/strong\u003e Will not fit models equipped with Factory LSD\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eHonda B16A2\/16B\/18C Fitments:\u003c\/strong\u003e Offering a revised design over our previous generation Final Drive Gears. Forged from stronger steel with a 50% larger tooth profile yet almost 1kg lighter!\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eHonda Cable Fitments:\u003c\/strong\u003e Will not fit models equipped with Factory LSD. 92-93 YS1 transmissions should use B16A2 fitments\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eHonda '98 Spec Fitments:\u003c\/strong\u003e Designed for the '98 Spec Integra Type-R with Factory 4.785 Final Drive\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eHonda H22A Fitments:\u003c\/strong\u003e Will not fit ATTS-equipped transmissions. Is also suitable for Euro-R\/Accord Type-R\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFor Ford Focus MTX-75:\u003c\/strong\u003e Designed for 2002+ Transmission Only. Will only fit applications using the 1pc Pinion (Removable 3rd \u0026amp; 4th Gear)\u003c\/p\u003e","brand":"MFactory","offers":[{"title":"5.15","offer_id":47317776564520,"sku":"MF-TRS-02H52-1","price":834.18,"currency_code":"GBP","in_stock":true},{"title":"4.64","offer_id":47317776597288,"sku":"MF-TRS-02H46-1","price":666.76,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/5767\/7352\/files\/mfactory-final-drive-honda-accord-h22a-f20b-5-15-gears-drives-427.webp?v=1716469642"},{"product_id":"mfactory-close-ratio-gears-dual-carbon-synchro-3rd-4th-single-5th-honda-prelude-h22a-f20b","title":"MFactory Dual Carbon Synchro 3rd 4th + Single 5th Honda Prelude H22A F20B","description":"\u003cp\u003eMFactory Dual Carbon Synchro 3rd 4th + Single 5th Honda Prelude H22A F20B.\u003c\/p\u003e\n\u003cp\u003eUtilizing a carbon-carbon lining technology initially developed for the Aerospace Industry which acts as braking material during gear engagement, this allows for quicker and more precise shifting and prolongs the life of your gear set. Unlike our competition, we \u003cu\u003eDO NOT\u003c\/u\u003e use a spray coating (which wears out quickly) nor a carbon fiber weave (the same stuff used on your Carbon Hood which was not designed for friction!)\u003cbr\u003e\u003cbr\u003eAfter several years of Research \u0026amp; Development on our championship winning race cars, we are proud to offer \u003cem\u003eTHE\u003c\/em\u003e most technologically advanced Synchros on the market.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSynchros are made from high strength Japanese brass\u003c\/li\u003e\n\u003cli\u003eSynchros are Carbon-Carbon Lined for increased performance and durability\u003c\/li\u003e\n\u003cli\u003e100% larger surface contact area for increase performance\u003c\/li\u003e\n\u003cli\u003eMore aggressive lock angle for effortless high rpm shifting\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"MFactory","offers":[{"title":"Default Title","offer_id":47317781905704,"sku":"MF-TRS-07MF-1","price":181.33,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/5767\/7352\/files\/mfactory-dual-carbon-synchro-3rd-4th-single-5th-honda-prelude-h22a-f20b-gears-final-drives-914.webp?v=1745122816"},{"product_id":"mfactory-close-ratio-gears-choice-of-3rd-4th-gears-synchros-and-hub-included-honda-prelude-h22a-f20b","title":"MFactory Close Ratio Gears Choice of 3rd 4th Gears (Synchros and hub included) Honda Prelude H22A F20B","description":"\u003cp\u003eAchieve the ultimate in acceleration with the MFactory Close Ratio Gears. After installing our gears, you will experience a phenomenal increase in acceleration despite a lower top speed.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDiamond Cut to exacting tolerances from Forged High-Nickel-Chromium-Molybdenum Steel\u003c\/strong\u003e\u003cbr\u003ePerfect fitment \u0026amp; finish ensures hassle-free installation \u0026amp; maintenance, each and every time\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDesigned using leading-edge Solidworks 3D CAD \u0026amp; Cosmos FEA software\u003c\/strong\u003e\u003cbr\u003eAdvanced Gear Geometry minimizes parasitic drivetrain losses. Race transmissions built with INFINITUDE components transfer, on average, 1-2% more power to the ground over our competitors!\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDual-Cone Carbon-Composite Synchro Technology for Honda B-Series\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003eAn Industry First!\u003c\/strong\u003e Taking 21st Century technology from the Honda K-Series and applying it to the Honda B-Series, this ensures quicker and more precise shifting at higher rpm's in 3rd \u0026amp; 4th Gears\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMade from imported Japanese SAE 8620 and 4320 Steel\u003c\/li\u003e\n\u003cli\u003eForged, Double Tempered and Super Sub-Zero treated for unsurpassed toughness\u003c\/li\u003e\n\u003cli\u003eAdvanced Shot Peening technology increases surface hardness\u003c\/li\u003e\n\u003cli\u003eAdvanced gear geometry designed using industry-leading software puts more power to the ground\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eFitment Notes\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFor Honda B-Series:\u003c\/strong\u003e\u003cbr\u003e4th Gear - Slight modification required to transmission casing when installing 1.357 or 1.410\u003cbr\u003e5th Gear - Slight modification required to transmission casing when installing 1.129 and 1.207\u003cbr\u003e\u003cimg src=\"https:\/\/www.ycwholdings.com\/assets\/images\/catalog\/casemodify.jpg\"\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFor Ford Focus MTX-75:\u003c\/strong\u003e\u003cbr\u003eDesigned for 2002+ Transmission Only. Will only fit applications using the 1pc Pinion (Removable 3rd \u0026amp; 4th Gear)\u003c\/p\u003e","brand":"MFactory","offers":[{"title":"Default Title","offer_id":47317782462760,"sku":"MF-TRS-01BSA","price":799.46,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/5767\/7352\/files\/mfactory-close-ratio-gears-choice-of-3rd-4th-synchros-and-hub-included-honda-prelude-h22a-f20b-final-drives-199.webp?v=1716469882"},{"product_id":"mfactory-close-ratio-gears-1-410-4th-gear-dual-synchro-included-honda-prelude-h22a-f20b-must-use-mfactory-dual-synchro-3rd-gear","title":"MFactory Close Ratio Gears 1.410 4th Gear - Dual Synchro (included) Honda Prelude H22A F20B - Must use MFactory Dual Synchro 3rd Gear","description":"\u003cp\u003eAchieve the ultimate in acceleration with the MFactory Close Ratio Gears. After installing our gears, you will experience a phenomenal increase in acceleration despite a lower top speed.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDiamond Cut to exacting tolerances from Forged High-Nickel-Chromium-Molybdenum Steel\u003c\/strong\u003e\u003cbr\u003ePerfect fitment \u0026amp; finish ensures hassle-free installation \u0026amp; maintenance, each and every time\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDesigned using leading-edge Solidworks 3D CAD \u0026amp; Cosmos FEA software\u003c\/strong\u003e\u003cbr\u003eAdvanced Gear Geometry minimizes parasitic drivetrain losses. Race transmissions built with INFINITUDE components transfer, on average, 1-2% more power to the ground over our competitors!\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDual-Cone Carbon-Composite Synchro Technology for Honda B-Series\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003eAn Industry First!\u003c\/strong\u003e Taking 21st Century technology from the Honda K-Series and applying it to the Honda B-Series, this ensures quicker and more precise shifting at higher rpm's in 3rd \u0026amp; 4th Gears\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMade from imported Japanese SAE 8620 and 4320 Steel\u003c\/li\u003e\n\u003cli\u003eForged, Double Tempered and Super Sub-Zero treated for unsurpassed toughness\u003c\/li\u003e\n\u003cli\u003eAdvanced Shot Peening technology increases surface hardness\u003c\/li\u003e\n\u003cli\u003eAdvanced gear geometry designed using industry-leading software puts more power to the ground\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eFitment Notes\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFor Honda B-Series:\u003c\/strong\u003e\u003cbr\u003e4th Gear - Slight modification required to transmission casing when installing 1.357 or 1.410\u003cbr\u003e5th Gear - Slight modification required to transmission casing when installing 1.129 and 1.207\u003cbr\u003e\u003cimg src=\"https:\/\/www.ycwholdings.com\/assets\/images\/catalog\/casemodify.jpg\"\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFor Ford Focus MTX-75:\u003c\/strong\u003e\u003cbr\u003eDesigned for 2002+ Transmission Only. Will only fit applications using the 1pc Pinion (Removable 3rd \u0026amp; 4th Gear)\u003c\/p\u003e","brand":"MFactory","offers":[{"title":"Default Title","offer_id":47317782495528,"sku":"MF-TRS-01B4C-2","price":481.53,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/5767\/7352\/files\/mfactory-close-ratio-gears-1-410-4th-gear-dual-synchro-included-honda-prelude-h22a-f20b-must-use-3rd-final-drives-852.webp?v=1745122426"},{"product_id":"mfactory-close-ratio-gears-1-357-4th-gear-dual-synchro-included-honda-prelude-h22a-f20b-must-use-mfactory-dual-synchro-3rd-gear","title":"MFactory Close Ratio Gears 1.357 4th Gear - Dual Synchro (included) Honda Prelude H22A F20B - Must use MFactory Dual Synchro 3rd Gear","description":"\u003cp\u003eAchieve the ultimate in acceleration with the MFactory Close Ratio Gears. After installing our gears, you will experience a phenomenal increase in acceleration despite a lower top speed.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDiamond Cut to exacting tolerances from Forged High-Nickel-Chromium-Molybdenum Steel\u003c\/strong\u003e\u003cbr\u003ePerfect fitment \u0026amp; finish ensures hassle-free installation \u0026amp; maintenance, each and every time\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDesigned using leading-edge Solidworks 3D CAD \u0026amp; Cosmos FEA software\u003c\/strong\u003e\u003cbr\u003eAdvanced Gear Geometry minimizes parasitic drivetrain losses. Race transmissions built with INFINITUDE components transfer, on average, 1-2% more power to the ground over our competitors!\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDual-Cone Carbon-Composite Synchro Technology for Honda B-Series\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003eAn Industry First!\u003c\/strong\u003e Taking 21st Century technology from the Honda K-Series and applying it to the Honda B-Series, this ensures quicker and more precise shifting at higher rpm's in 3rd \u0026amp; 4th Gears\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMade from imported Japanese SAE 8620 and 4320 Steel\u003c\/li\u003e\n\u003cli\u003eForged, Double Tempered and Super Sub-Zero treated for unsurpassed toughness\u003c\/li\u003e\n\u003cli\u003eAdvanced Shot Peening technology increases surface hardness\u003c\/li\u003e\n\u003cli\u003eAdvanced gear geometry designed using industry-leading software puts more power to the ground\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eFitment Notes\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFor Honda B-Series:\u003c\/strong\u003e\u003cbr\u003e4th Gear - Slight modification required to transmission casing when installing 1.357 or 1.410\u003cbr\u003e5th Gear - Slight modification required to transmission casing when installing 1.129 and 1.207\u003cbr\u003e\u003cimg src=\"https:\/\/www.ycwholdings.com\/assets\/images\/catalog\/casemodify.jpg\"\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFor Ford Focus MTX-75:\u003c\/strong\u003e\u003cbr\u003eDesigned for 2002+ Transmission Only. Will only fit applications using the 1pc Pinion (Removable 3rd \u0026amp; 4th Gear)\u003c\/p\u003e","brand":"MFactory","offers":[{"title":"Default Title","offer_id":47317782659368,"sku":"MF-TRS-01B4B-1","price":481.53,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/5767\/7352\/files\/mfactory-close-ratio-gears-1-357-4th-gear-dual-synchro-included-honda-prelude-h22a-f20b-must-use-3rd-final-drives-608.webp?v=1716469893"},{"product_id":"mfactory-close-ratio-gears-1-310-4th-gear-dual-synchro-included-honda-prelude-h22a-f20b-must-use-mfactory-dual-synchro-3rd-gear","title":"MFactory Close Ratio Gears 1.310 4th Gear - Dual Synchro (included) Honda Prelude H22A F20B - Must use MFactory Dual Synchro 3rd Gear","description":"\u003cp\u003eAchieve the ultimate in acceleration with the MFactory Close Ratio Gears. After installing our gears, you will experience a phenomenal increase in acceleration despite a lower top speed.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDiamond Cut to exacting tolerances from Forged High-Nickel-Chromium-Molybdenum Steel\u003c\/strong\u003e\u003cbr\u003ePerfect fitment \u0026amp; finish ensures hassle-free installation \u0026amp; maintenance, each and every time\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDesigned using leading-edge Solidworks 3D CAD \u0026amp; Cosmos FEA software\u003c\/strong\u003e\u003cbr\u003eAdvanced Gear Geometry minimizes parasitic drivetrain losses. Race transmissions built with INFINITUDE components transfer, on average, 1-2% more power to the ground over our competitors!\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDual-Cone Carbon-Composite Synchro Technology for Honda B-Series\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003eAn Industry First!\u003c\/strong\u003e Taking 21st Century technology from the Honda K-Series and applying it to the Honda B-Series, this ensures quicker and more precise shifting at higher rpm's in 3rd \u0026amp; 4th Gears\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMade from imported Japanese SAE 8620 and 4320 Steel\u003c\/li\u003e\n\u003cli\u003eForged, Double Tempered and Super Sub-Zero treated for unsurpassed toughness\u003c\/li\u003e\n\u003cli\u003eAdvanced Shot Peening technology increases surface hardness\u003c\/li\u003e\n\u003cli\u003eAdvanced gear geometry designed using industry-leading software puts more power to the ground\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eFitment Notes\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFor Honda B-Series:\u003c\/strong\u003e\u003cbr\u003e4th Gear - Slight modification required to transmission casing when installing 1.357 or 1.410\u003cbr\u003e5th Gear - Slight modification required to transmission casing when installing 1.129 and 1.207\u003cbr\u003e\u003cimg src=\"https:\/\/www.ycwholdings.com\/assets\/images\/catalog\/casemodify.jpg\"\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFor Ford Focus MTX-75:\u003c\/strong\u003e\u003cbr\u003eDesigned for 2002+ Transmission Only. Will only fit applications using the 1pc Pinion (Removable 3rd \u0026amp; 4th Gear)\u003c\/p\u003e","brand":"MFactory","offers":[{"title":"Default Title","offer_id":47317782692136,"sku":"MF-TRS-01B4A-2","price":481.53,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/5767\/7352\/files\/mfactory-close-ratio-gears-1-310-4th-gear-dual-synchro-included-honda-prelude-h22a-f20b-must-use-3rd-final-drives-542.webp?v=1716469899"},{"product_id":"mfactory-close-ratio-gears-1-700-3rd-gear-dual-synchro-included-honda-prelude-h22a-f20b-must-use-mfactory-dual-synchro-4th-gear","title":"MFactory Close Ratio Gears 1.700 3rd Gear - Dual Synchro (included) Honda Prelude H22A F20B - Must use MFactory Dual Synchro 4th Gear","description":"\u003cp\u003eAchieve the ultimate in acceleration with the MFactory Close Ratio Gears. After installing our gears, you will experience a phenomenal increase in acceleration despite a lower top speed.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDiamond Cut to exacting tolerances from Forged High-Nickel-Chromium-Molybdenum Steel\u003c\/strong\u003e\u003cbr\u003ePerfect fitment \u0026amp; finish ensures hassle-free installation \u0026amp; maintenance, each and every time\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDesigned using leading-edge Solidworks 3D CAD \u0026amp; Cosmos FEA software\u003c\/strong\u003e\u003cbr\u003eAdvanced Gear Geometry minimizes parasitic drivetrain losses. Race transmissions built with INFINITUDE components transfer, on average, 1-2% more power to the ground over our competitors!\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDual-Cone Carbon-Composite Synchro Technology for Honda B-Series\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003eAn Industry First!\u003c\/strong\u003e Taking 21st Century technology from the Honda K-Series and applying it to the Honda B-Series, this ensures quicker and more precise shifting at higher rpm's in 3rd \u0026amp; 4th Gears\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMade from imported Japanese SAE 8620 and 4320 Steel\u003c\/li\u003e\n\u003cli\u003eForged, Double Tempered and Super Sub-Zero treated for unsurpassed toughness\u003c\/li\u003e\n\u003cli\u003eAdvanced Shot Peening technology increases surface hardness\u003c\/li\u003e\n\u003cli\u003eAdvanced gear geometry designed using industry-leading software puts more power to the ground\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eFitment Notes\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFor Honda B-Series:\u003c\/strong\u003e\u003cbr\u003e4th Gear - Slight modification required to transmission casing when installing 1.357 or 1.410\u003cbr\u003e5th Gear - Slight modification required to transmission casing when installing 1.129 and 1.207\u003cbr\u003e\u003cimg src=\"https:\/\/www.ycwholdings.com\/assets\/images\/catalog\/casemodify.jpg\"\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFor Ford Focus MTX-75:\u003c\/strong\u003e\u003cbr\u003eDesigned for 2002+ Transmission Only. Will only fit applications using the 1pc Pinion (Removable 3rd \u0026amp; 4th Gear)\u003c\/p\u003e","brand":"MFactory","offers":[{"title":"Default Title","offer_id":47317782724904,"sku":"MF-TRS-01B3C","price":437.74,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/5767\/7352\/files\/mfactory-close-ratio-gears-1-700-3rd-gear-dual-synchro-included-honda-prelude-h22a-f20b-must-use-4th-final-drives-111.webp?v=1745122446"},{"product_id":"mfactory-close-ratio-gears-1-667-3rd-gear-dual-synchro-included-honda-prelude-h22a-f20b-must-use-mfactory-dual-synchro-4th-gear","title":"MFactory Close Ratio Gears 1.667 3rd Gear - Dual Synchro (included) Honda Prelude H22A F20B - Must use MFactory Dual Synchro 4th Gear","description":"\u003cp\u003eAchieve the ultimate in acceleration with the MFactory Close Ratio Gears. After installing our gears, you will experience a phenomenal increase in acceleration despite a lower top speed.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDiamond Cut to exacting tolerances from Forged High-Nickel-Chromium-Molybdenum Steel\u003c\/strong\u003e\u003cbr\u003ePerfect fitment \u0026amp; finish ensures hassle-free installation \u0026amp; maintenance, each and every time\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDesigned using leading-edge Solidworks 3D CAD \u0026amp; Cosmos FEA software\u003c\/strong\u003e\u003cbr\u003eAdvanced Gear Geometry minimizes parasitic drivetrain losses. Race transmissions built with INFINITUDE components transfer, on average, 1-2% more power to the ground over our competitors!\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDual-Cone Carbon-Composite Synchro Technology for Honda B-Series\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003eAn Industry First!\u003c\/strong\u003e Taking 21st Century technology from the Honda K-Series and applying it to the Honda B-Series, this ensures quicker and more precise shifting at higher rpm's in 3rd \u0026amp; 4th Gears\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMade from imported Japanese SAE 8620 and 4320 Steel\u003c\/li\u003e\n\u003cli\u003eForged, Double Tempered and Super Sub-Zero treated for unsurpassed toughness\u003c\/li\u003e\n\u003cli\u003eAdvanced Shot Peening technology increases surface hardness\u003c\/li\u003e\n\u003cli\u003eAdvanced gear geometry designed using industry-leading software puts more power to the ground\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eFitment Notes\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFor Honda B-Series:\u003c\/strong\u003e\u003cbr\u003e4th Gear - Slight modification required to transmission casing when installing 1.357 or 1.410\u003cbr\u003e5th Gear - Slight modification required to transmission casing when installing 1.129 and 1.207\u003cbr\u003e\u003cimg src=\"https:\/\/www.ycwholdings.com\/assets\/images\/catalog\/casemodify.jpg\"\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFor Ford Focus MTX-75:\u003c\/strong\u003e\u003cbr\u003eDesigned for 2002+ Transmission Only. Will only fit applications using the 1pc Pinion (Removable 3rd \u0026amp; 4th Gear)\u003c\/p\u003e","brand":"MFactory","offers":[{"title":"Default Title","offer_id":47317782790440,"sku":"MF-TRS-01B3B-2","price":481.53,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/5767\/7352\/files\/mfactory-close-ratio-gears-1-667-3rd-gear-dual-synchro-included-honda-prelude-h22a-f20b-must-use-4th-final-drives-226.webp?v=1716469910"},{"product_id":"mfactory-close-ratio-gears-1-636-3rd-gear-dual-synchro-included-honda-prelude-h22a-f20b-must-use-mfactory-dual-synchro-4th-gear","title":"MFactory Close Ratio Gears 1.636 3rd Gear - Dual Synchro (included) Honda Prelude H22A F20B - Must use MFactory Dual Synchro 4th Gear","description":"\u003cp\u003eAchieve the ultimate in acceleration with the MFactory Close Ratio Gears. After installing our gears, you will experience a phenomenal increase in acceleration despite a lower top speed.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDiamond Cut to exacting tolerances from Forged High-Nickel-Chromium-Molybdenum Steel\u003c\/strong\u003e\u003cbr\u003ePerfect fitment \u0026amp; finish ensures hassle-free installation \u0026amp; maintenance, each and every time\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDesigned using leading-edge Solidworks 3D CAD \u0026amp; Cosmos FEA software\u003c\/strong\u003e\u003cbr\u003eAdvanced Gear Geometry minimizes parasitic drivetrain losses. Race transmissions built with INFINITUDE components transfer, on average, 1-2% more power to the ground over our competitors!\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDual-Cone Carbon-Composite Synchro Technology for Honda B-Series\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003eAn Industry First!\u003c\/strong\u003e Taking 21st Century technology from the Honda K-Series and applying it to the Honda B-Series, this ensures quicker and more precise shifting at higher rpm's in 3rd \u0026amp; 4th Gears\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMade from imported Japanese SAE 8620 and 4320 Steel\u003c\/li\u003e\n\u003cli\u003eForged, Double Tempered and Super Sub-Zero treated for unsurpassed toughness\u003c\/li\u003e\n\u003cli\u003eAdvanced Shot Peening technology increases surface hardness\u003c\/li\u003e\n\u003cli\u003eAdvanced gear geometry designed using industry-leading software puts more power to the ground\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eFitment Notes\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFor Honda B-Series:\u003c\/strong\u003e\u003cbr\u003e4th Gear - Slight modification required to transmission casing when installing 1.357 or 1.410\u003cbr\u003e5th Gear - Slight modification required to transmission casing when installing 1.129 and 1.207\u003cbr\u003e\u003cimg src=\"https:\/\/www.ycwholdings.com\/assets\/images\/catalog\/casemodify.jpg\"\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFor Ford Focus MTX-75:\u003c\/strong\u003e\u003cbr\u003eDesigned for 2002+ Transmission Only. Will only fit applications using the 1pc Pinion (Removable 3rd \u0026amp; 4th Gear)\u003c\/p\u003e","brand":"MFactory","offers":[{"title":"Default Title","offer_id":47317782921512,"sku":"MF-TRS-01B3A-2","price":481.53,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/5767\/7352\/files\/mfactory-close-ratio-gears-1-636-3rd-gear-dual-synchro-included-honda-prelude-h22a-f20b-must-use-4th-final-drives-735.webp?v=1745122618"},{"product_id":"mfactory-close-ratio-gears-dual-carbon-synchro-3rd-4th-single-5th-honda-accord-h22a-f20b","title":"MFactory Dual Carbon Synchro 3rd 4th + Single 5th Honda Accord H22A F20B","description":"\u003cp\u003eUtilizing a carbon-carbon lining technology initially developed for the Aerospace Industry which acts as braking material during gear engagement, this allows for quicker and more precise shifting and prolongs the life of your gear set. Unlike our competition, we \u003cu\u003eDO NOT\u003c\/u\u003e use a spray coating (which wears out quickly) nor a carbon fiber weave (the same stuff used on your Carbon Hood which was not designed for friction!)\u003cbr\u003e\u003cbr\u003eAfter several years of Research \u0026amp; Development on our championship winning race cars, we are proud to offer \u003cem\u003eTHE\u003c\/em\u003e most technologically advanced Synchros on the market.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSynchros are made from high strength Japanese brass\u003c\/li\u003e\n\u003cli\u003eSynchros are Carbon-Carbon Lined for increased performance and durability\u003c\/li\u003e\n\u003cli\u003e100% larger surface contact area for increase performance\u003c\/li\u003e\n\u003cli\u003eMore aggressive lock angle for effortless high rpm shifting\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"MFactory","offers":[{"title":"Default Title","offer_id":47317782954280,"sku":"MF-TRS-07MF-2","price":181.33,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/5767\/7352\/files\/mfactory-dual-carbon-synchro-3rd-4th-single-5th-honda-accord-h22a-f20b-gears-final-drives-511.webp?v=1745122440"},{"product_id":"mfactory-close-ratio-gears-choice-of-3rd-4th-gears-synchros-and-hub-included-honda-accord-h22a-f20b","title":"MFactory Close Ratio Gears Choice of 3rd 4th Gears (Synchros and hub included) Honda Accord H22A F20B","description":"\u003cp\u003eAchieve the ultimate in acceleration with the MFactory Close Ratio Gears. After installing our gears, you will experience a phenomenal increase in acceleration despite a lower top speed.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDiamond Cut to exacting tolerances from Forged High-Nickel-Chromium-Molybdenum Steel\u003c\/strong\u003e\u003cbr\u003ePerfect fitment \u0026amp; finish ensures hassle-free installation \u0026amp; maintenance, each and every time\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDesigned using leading-edge Solidworks 3D CAD \u0026amp; Cosmos FEA software\u003c\/strong\u003e\u003cbr\u003eAdvanced Gear Geometry minimizes parasitic drivetrain losses. Race transmissions built with INFINITUDE components transfer, on average, 1-2% more power to the ground over our competitors!\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDual-Cone Carbon-Composite Synchro Technology for Honda B-Series\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003eAn Industry First!\u003c\/strong\u003e Taking 21st Century technology from the Honda K-Series and applying it to the Honda B-Series, this ensures quicker and more precise shifting at higher rpm's in 3rd \u0026amp; 4th Gears\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMade from imported Japanese SAE 8620 and 4320 Steel\u003c\/li\u003e\n\u003cli\u003eForged, Double Tempered and Super Sub-Zero treated for unsurpassed toughness\u003c\/li\u003e\n\u003cli\u003eAdvanced Shot Peening technology increases surface hardness\u003c\/li\u003e\n\u003cli\u003eAdvanced gear geometry designed using industry-leading software puts more power to the ground\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eFitment Notes\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFor Honda B-Series:\u003c\/strong\u003e\u003cbr\u003e4th Gear - Slight modification required to transmission casing when installing 1.357 or 1.410\u003cbr\u003e5th Gear - Slight modification required to transmission casing when installing 1.129 and 1.207\u003cbr\u003e\u003cimg src=\"https:\/\/www.ycwholdings.com\/assets\/images\/catalog\/casemodify.jpg\"\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFor Ford Focus MTX-75:\u003c\/strong\u003e\u003cbr\u003eDesigned for 2002+ Transmission Only. Will only fit applications using the 1pc Pinion (Removable 3rd \u0026amp; 4th Gear)\u003c\/p\u003e","brand":"MFactory","offers":[{"title":"Default Title","offer_id":47317782987048,"sku":"MF-TRS-01BSA","price":879.73,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/5767\/7352\/files\/mfactory-close-ratio-gears-choice-of-3rd-4th-synchros-and-hub-included-honda-accord-h22a-f20b-final-drives-177.webp?v=1745122456"},{"product_id":"mfactory-close-ratio-gears-1-410-4th-gear-dual-synchro-included-honda-accord-h22a-f20b-must-use-mfactory-dual-synchro-3rd-gear","title":"MFactory Close Ratio Gears 1.410 4th Gear - Dual Synchro (included) Honda Accord H22A F20B - Must use MFactory Dual Synchro 3rd Gear","description":"\u003cp\u003eAchieve the ultimate in acceleration with the MFactory Close Ratio Gears. After installing our gears, you will experience a phenomenal increase in acceleration despite a lower top speed.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDiamond Cut to exacting tolerances from Forged High-Nickel-Chromium-Molybdenum Steel\u003c\/strong\u003e\u003cbr\u003ePerfect fitment \u0026amp; finish ensures hassle-free installation \u0026amp; maintenance, each and every time\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDesigned using leading-edge Solidworks 3D CAD \u0026amp; Cosmos FEA software\u003c\/strong\u003e\u003cbr\u003eAdvanced Gear Geometry minimizes parasitic drivetrain losses. Race transmissions built with INFINITUDE components transfer, on average, 1-2% more power to the ground over our competitors!\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDual-Cone Carbon-Composite Synchro Technology for Honda B-Series\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003eAn Industry First!\u003c\/strong\u003e Taking 21st Century technology from the Honda K-Series and applying it to the Honda B-Series, this ensures quicker and more precise shifting at higher rpm's in 3rd \u0026amp; 4th Gears\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMade from imported Japanese SAE 8620 and 4320 Steel\u003c\/li\u003e\n\u003cli\u003eForged, Double Tempered and Super Sub-Zero treated for unsurpassed toughness\u003c\/li\u003e\n\u003cli\u003eAdvanced Shot Peening technology increases surface hardness\u003c\/li\u003e\n\u003cli\u003eAdvanced gear geometry designed using industry-leading software puts more power to the ground\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eFitment Notes\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFor Honda B-Series:\u003c\/strong\u003e\u003cbr\u003e4th Gear - Slight modification required to transmission casing when installing 1.357 or 1.410\u003cbr\u003e5th Gear - Slight modification required to transmission casing when installing 1.129 and 1.207\u003cbr\u003e\u003cimg src=\"https:\/\/www.ycwholdings.com\/assets\/images\/catalog\/casemodify.jpg\"\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFor Ford Focus MTX-75:\u003c\/strong\u003e\u003cbr\u003eDesigned for 2002+ Transmission Only. Will only fit applications using the 1pc Pinion (Removable 3rd \u0026amp; 4th Gear)\u003c\/p\u003e","brand":"MFactory","offers":[{"title":"Default Title","offer_id":47317783019816,"sku":"MF-TRS-01B4C-2","price":437.74,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/5767\/7352\/files\/mfactory-close-ratio-gears-1-410-4th-gear-dual-synchro-included-honda-accord-h22a-f20b-must-use-3rd-final-drives-617.webp?v=1716469934"},{"product_id":"mfactory-close-ratio-gears-1-357-4th-gear-dual-synchro-included-honda-accord-h22a-f20b-must-use-mfactory-dual-synchro-3rd-gear","title":"MFactory Close Ratio Gears 1.357 4th Gear - Dual Synchro (included) Honda Accord H22A F20B - Must use MFactory Dual Synchro 3rd Gear","description":"\u003cp\u003eAchieve the ultimate in acceleration with the MFactory Close Ratio Gears. After installing our gears, you will experience a phenomenal increase in acceleration despite a lower top speed.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDiamond Cut to exacting tolerances from Forged High-Nickel-Chromium-Molybdenum Steel\u003c\/strong\u003e\u003cbr\u003ePerfect fitment \u0026amp; finish ensures hassle-free installation \u0026amp; maintenance, each and every time\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDesigned using leading-edge Solidworks 3D CAD \u0026amp; Cosmos FEA software\u003c\/strong\u003e\u003cbr\u003eAdvanced Gear Geometry minimizes parasitic drivetrain losses. Race transmissions built with INFINITUDE components transfer, on average, 1-2% more power to the ground over our competitors!\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDual-Cone Carbon-Composite Synchro Technology for Honda B-Series\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003eAn Industry First!\u003c\/strong\u003e Taking 21st Century technology from the Honda K-Series and applying it to the Honda B-Series, this ensures quicker and more precise shifting at higher rpm's in 3rd \u0026amp; 4th Gears\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMade from imported Japanese SAE 8620 and 4320 Steel\u003c\/li\u003e\n\u003cli\u003eForged, Double Tempered and Super Sub-Zero treated for unsurpassed toughness\u003c\/li\u003e\n\u003cli\u003eAdvanced Shot Peening technology increases surface hardness\u003c\/li\u003e\n\u003cli\u003eAdvanced gear geometry designed using industry-leading software puts more power to the ground\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eFitment Notes\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFor Honda B-Series:\u003c\/strong\u003e\u003cbr\u003e4th Gear - Slight modification required to transmission casing when installing 1.357 or 1.410\u003cbr\u003e5th Gear - Slight modification required to transmission casing when installing 1.129 and 1.207\u003cbr\u003e\u003cimg src=\"https:\/\/www.ycwholdings.com\/assets\/images\/catalog\/casemodify.jpg\"\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFor Ford Focus MTX-75:\u003c\/strong\u003e\u003cbr\u003eDesigned for 2002+ Transmission Only. Will only fit applications using the 1pc Pinion (Removable 3rd \u0026amp; 4th Gear)\u003c\/p\u003e","brand":"MFactory","offers":[{"title":"Default Title","offer_id":47317783052584,"sku":"MF-TRS-01B4B-1","price":437.74,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/5767\/7352\/files\/mfactory-close-ratio-gears-1-357-4th-gear-dual-synchro-included-honda-accord-h22a-f20b-must-use-3rd-final-drives-393.webp?v=1745122695"},{"product_id":"mfactory-close-ratio-gears-1-310-4th-gear-dual-synchro-included-honda-accord-h22a-f20b-must-use-mfactory-dual-synchro-3rd-gear","title":"MFactory Close Ratio Gears 1.310 4th Gear - Dual Synchro (included) Honda Accord H22A F20B - Must use MFactory Dual Synchro 3rd Gear","description":"\u003cp\u003eAchieve the ultimate in acceleration with the MFactory Close Ratio Gears. After installing our gears, you will experience a phenomenal increase in acceleration despite a lower top speed.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDiamond Cut to exacting tolerances from Forged High-Nickel-Chromium-Molybdenum Steel\u003c\/strong\u003e\u003cbr\u003ePerfect fitment \u0026amp; finish ensures hassle-free installation \u0026amp; maintenance, each and every time\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDesigned using leading-edge Solidworks 3D CAD \u0026amp; Cosmos FEA software\u003c\/strong\u003e\u003cbr\u003eAdvanced Gear Geometry minimizes parasitic drivetrain losses. Race transmissions built with INFINITUDE components transfer, on average, 1-2% more power to the ground over our competitors!\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDual-Cone Carbon-Composite Synchro Technology for Honda B-Series\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003eAn Industry First!\u003c\/strong\u003e Taking 21st Century technology from the Honda K-Series and applying it to the Honda B-Series, this ensures quicker and more precise shifting at higher rpm's in 3rd \u0026amp; 4th Gears\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMade from imported Japanese SAE 8620 and 4320 Steel\u003c\/li\u003e\n\u003cli\u003eForged, Double Tempered and Super Sub-Zero treated for unsurpassed toughness\u003c\/li\u003e\n\u003cli\u003eAdvanced Shot Peening technology increases surface hardness\u003c\/li\u003e\n\u003cli\u003eAdvanced gear geometry designed using industry-leading software puts more power to the ground\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eFitment Notes\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFor Honda B-Series:\u003c\/strong\u003e\u003cbr\u003e4th Gear - Slight modification required to transmission casing when installing 1.357 or 1.410\u003cbr\u003e5th Gear - Slight modification required to transmission casing when installing 1.129 and 1.207\u003cbr\u003e\u003cimg src=\"https:\/\/www.ycwholdings.com\/assets\/images\/catalog\/casemodify.jpg\"\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFor Ford Focus MTX-75:\u003c\/strong\u003e\u003cbr\u003eDesigned for 2002+ Transmission Only. Will only fit applications using the 1pc Pinion (Removable 3rd \u0026amp; 4th Gear)\u003c\/p\u003e","brand":"MFactory","offers":[{"title":"Default Title","offer_id":47317783085352,"sku":"MF-TRS-01B4A-2","price":437.74,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/5767\/7352\/files\/mfactory-close-ratio-gears-1-310-4th-gear-dual-synchro-included-honda-accord-h22a-f20b-must-use-3rd-final-drives-837.webp?v=1745122960"},{"product_id":"mfactory-close-ratio-gears-1-700-3rd-gear-dual-synchro-included-honda-accord-h22a-f20b-must-use-mfactory-dual-synchro-4th-gear","title":"MFactory Close Ratio Gears 1.700 3rd Gear - Dual Synchro (included) Honda Accord H22A F20B - Must use MFactory Dual Synchro 4th Gear","description":"\u003cp\u003eAchieve the ultimate in acceleration with the MFactory Close Ratio Gears. After installing our gears, you will experience a phenomenal increase in acceleration despite a lower top speed.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDiamond Cut to exacting tolerances from Forged High-Nickel-Chromium-Molybdenum Steel\u003c\/strong\u003e\u003cbr\u003ePerfect fitment \u0026amp; finish ensures hassle-free installation \u0026amp; maintenance, each and every time\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDesigned using leading-edge Solidworks 3D CAD \u0026amp; Cosmos FEA software\u003c\/strong\u003e\u003cbr\u003eAdvanced Gear Geometry minimizes parasitic drivetrain losses. Race transmissions built with INFINITUDE components transfer, on average, 1-2% more power to the ground over our competitors!\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDual-Cone Carbon-Composite Synchro Technology for Honda B-Series\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003eAn Industry First!\u003c\/strong\u003e Taking 21st Century technology from the Honda K-Series and applying it to the Honda B-Series, this ensures quicker and more precise shifting at higher rpm's in 3rd \u0026amp; 4th Gears\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMade from imported Japanese SAE 8620 and 4320 Steel\u003c\/li\u003e\n\u003cli\u003eForged, Double Tempered and Super Sub-Zero treated for unsurpassed toughness\u003c\/li\u003e\n\u003cli\u003eAdvanced Shot Peening technology increases surface hardness\u003c\/li\u003e\n\u003cli\u003eAdvanced gear geometry designed using industry-leading software puts more power to the ground\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eFitment Notes\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFor Honda B-Series:\u003c\/strong\u003e\u003cbr\u003e4th Gear - Slight modification required to transmission casing when installing 1.357 or 1.410\u003cbr\u003e5th Gear - Slight modification required to transmission casing when installing 1.129 and 1.207\u003cbr\u003e\u003cimg src=\"https:\/\/www.ycwholdings.com\/assets\/images\/catalog\/casemodify.jpg\"\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFor Ford Focus MTX-75:\u003c\/strong\u003e\u003cbr\u003eDesigned for 2002+ Transmission Only. Will only fit applications using the 1pc Pinion (Removable 3rd \u0026amp; 4th Gear)\u003c\/p\u003e","brand":"MFactory","offers":[{"title":"Default Title","offer_id":47317783249192,"sku":"MF-TRS-01B3C","price":481.53,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/5767\/7352\/files\/mfactory-close-ratio-gears-1-700-3rd-gear-dual-synchro-included-honda-accord-h22a-f20b-must-use-4th-final-drives-493.webp?v=1745122603"},{"product_id":"mfactory-close-ratio-gears-1-667-3rd-gear-dual-synchro-included-honda-accord-h22a-f20b-must-use-mfactory-dual-synchro-4th-gear","title":"MFactory Close Ratio Gears 1.667 3rd Gear - Dual Synchro (included) Honda Accord H22A F20B - Must use MFactory Dual Synchro 4th Gear","description":"\u003cp\u003eAchieve the ultimate in acceleration with the MFactory Close Ratio Gears. After installing our gears, you will experience a phenomenal increase in acceleration despite a lower top speed.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDiamond Cut to exacting tolerances from Forged High-Nickel-Chromium-Molybdenum Steel\u003c\/strong\u003e\u003cbr\u003ePerfect fitment \u0026amp; finish ensures hassle-free installation \u0026amp; maintenance, each and every time\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDesigned using leading-edge Solidworks 3D CAD \u0026amp; Cosmos FEA software\u003c\/strong\u003e\u003cbr\u003eAdvanced Gear Geometry minimizes parasitic drivetrain losses. Race transmissions built with INFINITUDE components transfer, on average, 1-2% more power to the ground over our competitors!\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDual-Cone Carbon-Composite Synchro Technology for Honda B-Series\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003eAn Industry First!\u003c\/strong\u003e Taking 21st Century technology from the Honda K-Series and applying it to the Honda B-Series, this ensures quicker and more precise shifting at higher rpm's in 3rd \u0026amp; 4th Gears\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMade from imported Japanese SAE 8620 and 4320 Steel\u003c\/li\u003e\n\u003cli\u003eForged, Double Tempered and Super Sub-Zero treated for unsurpassed toughness\u003c\/li\u003e\n\u003cli\u003eAdvanced Shot Peening technology increases surface hardness\u003c\/li\u003e\n\u003cli\u003eAdvanced gear geometry designed using industry-leading software puts more power to the ground\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eFitment Notes\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFor Honda B-Series:\u003c\/strong\u003e\u003cbr\u003e4th Gear - Slight modification required to transmission casing when installing 1.357 or 1.410\u003cbr\u003e5th Gear - Slight modification required to transmission casing when installing 1.129 and 1.207\u003cbr\u003e\u003cimg src=\"https:\/\/www.ycwholdings.com\/assets\/images\/catalog\/casemodify.jpg\"\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFor Ford Focus MTX-75:\u003c\/strong\u003e\u003cbr\u003eDesigned for 2002+ Transmission Only. Will only fit applications using the 1pc Pinion (Removable 3rd \u0026amp; 4th Gear)\u003c\/p\u003e","brand":"MFactory","offers":[{"title":"Default Title","offer_id":47317783281960,"sku":"MF-TRS-01B3B-2","price":437.74,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/5767\/7352\/files\/mfactory-close-ratio-gears-1-667-3rd-gear-dual-synchro-included-honda-accord-h22a-f20b-must-use-4th-final-drives-840.webp?v=1716469959"},{"product_id":"mfactory-close-ratio-gears-1-636-3rd-gear-dual-synchro-included-honda-accord-h22a-f20b-must-use-mfactory-dual-synchro-4th-gear","title":"MFactory Close Ratio Gears 1.636 3rd Gear - Dual Synchro (included) Honda Accord H22A F20B - Must use MFactory Dual Synchro 4th Gear","description":"\u003cp\u003eAchieve the ultimate in acceleration with the MFactory Close Ratio Gears. After installing our gears, you will experience a phenomenal increase in acceleration despite a lower top speed.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDiamond Cut to exacting tolerances from Forged High-Nickel-Chromium-Molybdenum Steel\u003c\/strong\u003e\u003cbr\u003ePerfect fitment \u0026amp; finish ensures hassle-free installation \u0026amp; maintenance, each and every time\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDesigned using leading-edge Solidworks 3D CAD \u0026amp; Cosmos FEA software\u003c\/strong\u003e\u003cbr\u003eAdvanced Gear Geometry minimizes parasitic drivetrain losses. Race transmissions built with INFINITUDE components transfer, on average, 1-2% more power to the ground over our competitors!\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDual-Cone Carbon-Composite Synchro Technology for Honda B-Series\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003eAn Industry First!\u003c\/strong\u003e Taking 21st Century technology from the Honda K-Series and applying it to the Honda B-Series, this ensures quicker and more precise shifting at higher rpm's in 3rd \u0026amp; 4th Gears\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMade from imported Japanese SAE 8620 and 4320 Steel\u003c\/li\u003e\n\u003cli\u003eForged, Double Tempered and Super Sub-Zero treated for unsurpassed toughness\u003c\/li\u003e\n\u003cli\u003eAdvanced Shot Peening technology increases surface hardness\u003c\/li\u003e\n\u003cli\u003eAdvanced gear geometry designed using industry-leading software puts more power to the ground\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eFitment Notes\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFor Honda B-Series:\u003c\/strong\u003e\u003cbr\u003e4th Gear - Slight modification required to transmission casing when installing 1.357 or 1.410\u003cbr\u003e5th Gear - Slight modification required to transmission casing when installing 1.129 and 1.207\u003cbr\u003e\u003cimg src=\"https:\/\/www.ycwholdings.com\/assets\/images\/catalog\/casemodify.jpg\"\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFor Ford Focus MTX-75:\u003c\/strong\u003e\u003cbr\u003eDesigned for 2002+ Transmission Only. Will only fit applications using the 1pc Pinion (Removable 3rd \u0026amp; 4th Gear)\u003c\/p\u003e","brand":"MFactory","offers":[{"title":"Default Title","offer_id":47317783445800,"sku":"MF-TRS-01B3A-2","price":437.74,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/5767\/7352\/files\/mfactory-close-ratio-gears-1-636-3rd-gear-dual-synchro-included-honda-accord-h22a-f20b-must-use-4th-final-drives-244.webp?v=1716469965"},{"product_id":"infinitude-close-ratio-gears-honda-prelude-h22a-f20b-pro-series","title":"Infinitude Close Ratio Gears Honda Prelude H22A F20B - PRO Series","description":"\u003cp\u003eAchieve the ultimate in acceleration with the INFINITUDE Close Ratio Gears. After installing our gears, you will experience a phenomenal increase in acceleration despite a lower top speed.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDiamond Cut to exacting tolerances from Forged High-Nickel-Chromium-Molybdenum Steel\u003c\/strong\u003e\u003cbr\u003ePerfect fitment \u0026amp; finish ensures hassle-free installation \u0026amp; maintenance, each and every time\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDesigned using leading-edge Solidworks 3D CAD \u0026amp; Cosmos FEA software\u003c\/strong\u003e\u003cbr\u003eAdvanced Gear Geometry minimizes parasitic drivetrain losses. Race transmissions built with INFINITUDE components transfer, on average, 1-2% more power to the ground over our competitors!\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMade from imported Japanese SAE 8620 and 4320 Steel\u003c\/li\u003e\n\u003cli\u003eForged, Double Tempered and Super Sub-Zero treated for unsurpassed toughness\u003c\/li\u003e\n\u003cli\u003eAdvanced Shot Peening technology increases surface hardness\u003c\/li\u003e\n\u003cli\u003eAdvanced gear geometry designed using industry-leading software puts more power to the ground\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eFitment Notes\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFor Honda B-Series:\u003c\/strong\u003e\u003cbr\u003e4th Gear - Slight modification required to transmission casing when installing 1.384 or 1.410\u003cbr\u003e5th Gear - Slight modification required to transmission casing when installing 1.118, 1.130, 1.207 and 1.210\u003cbr\u003e\u003cimg src=\"https:\/\/www.ycwholdings.com\/assets\/images\/catalog\/casemodify.jpg\"\u003e\u003c\/p\u003e","brand":"Infinitude","offers":[{"title":"3rd \u0026 4th \/ 1.430 3rd \u0026 1.100 4th","offer_id":47317786919208,"sku":"INF-TRS-01HP","price":1446.52,"currency_code":"GBP","in_stock":false},{"title":"1st \u0026 2nd \/ 2.786 1st \u0026 1.900 2nd","offer_id":47317786951976,"sku":"INF-TRS-01HX","price":2086.8,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/5767\/7352\/files\/infinitude-close-ratio-gears-honda-prelude-h22a-f20b-pro-series-3rd-4th-1-430-100-final-drives-384.webp?v=1745122806"},{"product_id":"infinitude-close-ratio-gears-straight-cut-honda-prelude-h22a-f20b","title":"Infinitude Close Ratio Gears Straight Cut Honda Prelude H22A F20B","description":"\u003cp\u003eAchieve the ultimate in acceleration with the INFINITUDE Close Ratio Gears. After installing our gears, you will experience a phenomenal increase in acceleration despite a lower top speed.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDiamond Cut to exacting tolerances from Forged High-Nickel-Chromium-Molybdenum Steel\u003c\/strong\u003e\u003cbr\u003ePerfect fitment \u0026amp; finish ensures hassle-free installation \u0026amp; maintenance, each and every time\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDesigned using leading-edge Solidworks 3D CAD \u0026amp; Cosmos FEA software\u003c\/strong\u003e\u003cbr\u003eAdvanced Gear Geometry minimizes parasitic drivetrain losses. Race transmissions built with INFINITUDE components transfer, on average, 1-2% more power to the ground over our competitors!\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMade from imported Japanese SAE 8620 and 4320 Steel\u003c\/li\u003e\n\u003cli\u003eForged, Double Tempered and Super Sub-Zero treated for unsurpassed toughness\u003c\/li\u003e\n\u003cli\u003eAdvanced Shot Peening technology increases surface hardness\u003c\/li\u003e\n\u003cli\u003eAdvanced gear geometry designed using industry-leading software puts more power to the ground\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eFitment Notes\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFor Honda B-Series:\u003c\/strong\u003e\u003cbr\u003e4th Gear - Slight modification required to transmission casing when installing 1.384 or 1.410\u003cbr\u003e5th Gear - Slight modification required to transmission casing when installing 1.118, 1.130, 1.207 and 1.210\u003cbr\u003e\u003cimg src=\"https:\/\/www.ycwholdings.com\/assets\/images\/catalog\/casemodify.jpg\"\u003e\u003c\/p\u003e","brand":"Infinitude","offers":[{"title":"4th \/ 1.387","offer_id":47317786984744,"sku":"INF-TRS-01B4Cx-2","price":330.06,"currency_code":"GBP","in_stock":true},{"title":"4th \/ 1.355","offer_id":47317787017512,"sku":"INF-TRS-01B4Bx1","price":521.66,"currency_code":"GBP","in_stock":true},{"title":"4th \/ 1.313","offer_id":47317787050280,"sku":"INF-TRS-01B4Ax-2","price":330.06,"currency_code":"GBP","in_stock":true},{"title":"3rd \/ 1.704","offer_id":47317787083048,"sku":"INF-TRS-01B3Cx-2","price":330.06,"currency_code":"GBP","in_stock":true},{"title":"3rd \/ 1.67","offer_id":47317787115816,"sku":"INF-TRS-01B3Bx-2","price":330.06,"currency_code":"GBP","in_stock":true},{"title":"3rd \/ 1.636","offer_id":47317787148584,"sku":"INF-TRS-01B3Ax-2","price":330.06,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/5767\/7352\/files\/infinitude-close-ratio-gears-straight-cut-honda-prelude-h22a-f20b-4th-1-387-final-drives-579.webp?v=1716470230"},{"product_id":"infinitude-close-ratio-gear-honda-prelude-h22a-f20b","title":"Infinitude Close Ratio Gear Honda Prelude H22A F20B","description":"\u003cp\u003eAchieve the ultimate in acceleration with the INFINITUDE Close Ratio Gears. After installing our gears, you will experience a phenomenal increase in acceleration despite a lower top speed.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDiamond Cut to exacting tolerances from Forged High-Nickel-Chromium-Molybdenum Steel\u003c\/strong\u003e\u003cbr\u003ePerfect fitment \u0026amp; finish ensures hassle-free installation \u0026amp; maintenance, each and every time\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDesigned using leading-edge Solidworks 3D CAD \u0026amp; Cosmos FEA software\u003c\/strong\u003e\u003cbr\u003eAdvanced Gear Geometry minimizes parasitic drivetrain losses. Race transmissions built with INFINITUDE components transfer, on average, 1-2% more power to the ground over our competitors!\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMade from imported Japanese SAE 8620 and 4320 Steel\u003c\/li\u003e\n\u003cli\u003eForged, Double Tempered and Super Sub-Zero treated for unsurpassed toughness\u003c\/li\u003e\n\u003cli\u003eAdvanced Shot Peening technology increases surface hardness\u003c\/li\u003e\n\u003cli\u003eAdvanced gear geometry designed using industry-leading software puts more power to the ground\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eFitment Notes\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFor Honda B-Series:\u003c\/strong\u003e\u003cbr\u003e4th Gear - Slight modification required to transmission casing when installing 1.384 or 1.410\u003cbr\u003e5th Gear - Slight modification required to transmission casing when installing 1.118, 1.130, 1.207 and 1.210\u003cbr\u003e\u003cimg src=\"https:\/\/www.ycwholdings.com\/assets\/images\/catalog\/casemodify.jpg\"\u003e\u003c\/p\u003e","brand":"Infinitude","offers":[{"title":"4th \/ 1.384","offer_id":47317787345192,"sku":"INF-TRS-01B4B-2","price":306.63,"currency_code":"GBP","in_stock":true},{"title":"4th \/ 1.296","offer_id":47317787377960,"sku":"INF-TRS-01B4A-2","price":306.63,"currency_code":"GBP","in_stock":true},{"title":"3rd \/ 1.695","offer_id":47317787410728,"sku":"INF-TRS-01B3C-2","price":306.63,"currency_code":"GBP","in_stock":true},{"title":"3rd \/ 1.652","offer_id":47317787443496,"sku":"INF-TRS-01B3B-2","price":306.63,"currency_code":"GBP","in_stock":true},{"title":"3rd \/ 1.625","offer_id":47317787476264,"sku":"INF-TRS-01B3A-2","price":306.63,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/5767\/7352\/files\/infinitude-close-ratio-gear-honda-prelude-h22a-f20b-4th-1-384-gears-final-drives-394.webp?v=1716470236"},{"product_id":"infinitude-close-ratio-gear-straight-cut-honda-accord-h22a-f20b","title":"Infinitude Close Ratio Gear Straight Cut Honda Accord H22A F20B","description":"\u003cp\u003eAchieve the ultimate in acceleration with the INFINITUDE Close Ratio Gears. After installing our gears, you will experience a phenomenal increase in acceleration despite a lower top speed.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDiamond Cut to exacting tolerances from Forged High-Nickel-Chromium-Molybdenum Steel\u003c\/strong\u003e\u003cbr\u003ePerfect fitment \u0026amp; finish ensures hassle-free installation \u0026amp; maintenance, each and every time\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDesigned using leading-edge Solidworks 3D CAD \u0026amp; Cosmos FEA software\u003c\/strong\u003e\u003cbr\u003eAdvanced Gear Geometry minimizes parasitic drivetrain losses. Race transmissions built with INFINITUDE components transfer, on average, 1-2% more power to the ground over our competitors!\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMade from imported Japanese SAE 8620 and 4320 Steel\u003c\/li\u003e\n\u003cli\u003eForged, Double Tempered and Super Sub-Zero treated for unsurpassed toughness\u003c\/li\u003e\n\u003cli\u003eAdvanced Shot Peening technology increases surface hardness\u003c\/li\u003e\n\u003cli\u003eAdvanced gear geometry designed using industry-leading software puts more power to the ground\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eFitment Notes\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFor Honda B-Series:\u003c\/strong\u003e\u003cbr\u003e4th Gear - Slight modification required to transmission casing when installing 1.384 or 1.410\u003cbr\u003e5th Gear - Slight modification required to transmission casing when installing 1.118, 1.130, 1.207 and 1.210\u003cbr\u003e\u003cimg src=\"https:\/\/www.ycwholdings.com\/assets\/images\/catalog\/casemodify.jpg\"\u003e\u003c\/p\u003e","brand":"Infinitude","offers":[{"title":"4th \/ 1.387","offer_id":47317787509032,"sku":"INF-TRS-01B4Cx-1","price":330.06,"currency_code":"GBP","in_stock":true},{"title":"4th \/ 1.355","offer_id":47317787541800,"sku":"INF-TRS-01B4Bx-1","price":330.06,"currency_code":"GBP","in_stock":true},{"title":"4th \/ 1.313","offer_id":47317787574568,"sku":"INF-TRS-01B4Ax-1","price":330.06,"currency_code":"GBP","in_stock":true},{"title":"3rd \/ 1.704","offer_id":47317787607336,"sku":"INF-TRS-01B3Cx-1","price":330.06,"currency_code":"GBP","in_stock":true},{"title":"3rd \/ 1.67","offer_id":47317787640104,"sku":"INF-TRS-01B3Bx-1","price":330.06,"currency_code":"GBP","in_stock":true},{"title":"3rd \/ 1.636","offer_id":47317787672872,"sku":"INF-TRS-01B3Ax-1","price":330.06,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/5767\/7352\/files\/infinitude-close-ratio-gear-straight-cut-honda-accord-h22a-f20b-4th-1-387-gears-final-drives-302.webp?v=1716470241"},{"product_id":"synchrotech-1-5-synchro-spring-set-honda-prelude-h22-m2y4-m2f4-m2a4","title":"Synchrotech 1-5 Synchro Spring Set Honda Prelude H22 M2Y4 M2F4 M2A4","description":"\u003cp\u003eAll Kits include:\u003cbr\u003e\u003cbr\u003e- MFactory R\u0026amp;D (Synchrotech®) Zinc-Plated Synchro Springs\u003c\/p\u003e","brand":"Synchrotech","offers":[{"title":"Default Title","offer_id":47317790163240,"sku":"SP-109","price":65.81,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/5767\/7352\/files\/synchrotech-1-5-synchro-spring-set-honda-prelude-h22-m2y4-m2f4-m2a4-synchros-rebuild-kits-745.webp?v=1745122720"},{"product_id":"synchrotech-1-5-synchro-spring-set-honda-h23-f22-b16-b18-a1-j1-y2","title":"Synchrotech 1-5 Synchro Spring Set Honda H23 F22 B16 B18 A1 J1 Y2","description":"\u003cp\u003eAll Kits include:\u003cbr\u003e\u003cbr\u003e- MFactory R\u0026amp;D (Synchrotech®) Zinc-Plated Synchro Springs\u003c\/p\u003e","brand":"Synchrotech","offers":[{"title":"Default Title","offer_id":47317790261544,"sku":"SP-105","price":65.81,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/5767\/7352\/files\/synchrotech-1-5-synchro-spring-set-honda-h23-f22-b16-b18-a1-j1-y2-synchros-rebuild-kits-126.webp?v=1745122772"},{"product_id":"synchrotech-carbon-synchro-set-honda-prelude-h22-m2y4-m2f4-m2a4","title":"Synchrotech Carbon Synchro Set Honda Prelude H22 M2Y4 M2F4 M2A4","description":"\u003cp\u003eImprove shifting response with the MFactory R\u0026amp;D (Synchrotech®) Carbon-Composite Synchros.\u003cbr\u003e\u003cbr\u003eUtilizing a carbon-carbon lining technology initially developed for the Aerospace Industry which acts as braking material during gear engagement, this allows for quicker and more precise shifting and prolongs the life of your gear set. Unlike our competition, we \u003cu\u003eDO NOT\u003c\/u\u003e use a spray coating (which wears out quickly) nor a carbon fiber weave (the same stuff used on your Carbon Hood which was not designed for friction!)\u003cbr\u003e\u003cbr\u003eAfter several years of Research \u0026amp; Development on our championship winning race cars, we are proud to offer \u003cem\u003eTHE\u003c\/em\u003e most technologically advanced Synchros on the market.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSynchros are made from high strength Japanese brass\u003c\/li\u003e\n\u003cli\u003eSynchros are Carbon-Carbon Lined for increased performance and durability\u003c\/li\u003e\n\u003cli\u003e100% larger surface contact area for increase performance\u003c\/li\u003e\n\u003cli\u003eMore aggressive lock angle for effortless high rpm shifting\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Synchrotech","offers":[{"title":"1st-4th","offer_id":47317801566504,"sku":"SYN109A","price":328.95,"currency_code":"GBP","in_stock":true},{"title":"1st-5th","offer_id":47317801599272,"sku":"SYN109","price":365.51,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/5767\/7352\/files\/synchrotech-carbon-synchro-set-honda-prelude-h22-m2y4-m2f4-m2a4-1st-4th-synchros-rebuild-kits-900.webp?v=1716470834"},{"product_id":"synchrotech-1st-5th-brass-synchro-set-honda-prelude-h22-m2y4-m2f4-m2a4","title":"Synchrotech 1st-5th Brass Synchro Set Honda Prelude H22 M2Y4 M2F4 M2A4","description":"\u003cp\u003eImprove shifting response with the MFactory R\u0026amp;D (Synchrotech®) Premium Brass Synchros.\u003cbr\u003e\u003cbr\u003eUtilizing premium grade Japanese brass for quicker and more precise shifting and prolongs the life of your gear set.\u003cbr\u003e\u003cbr\u003eAfter several years of Research \u0026amp; Development on our championship winning race cars, we are proud to offer \u003cem\u003eTHE\u003c\/em\u003e most technologically advanced Synchros on the market.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSynchros are made from high strength Japanese brass\u003c\/li\u003e\n\u003cli\u003e100% larger surface contact area for increase performance\u003c\/li\u003e\n\u003cli\u003eMore aggressive lock angle for effortless high rpm shifting\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Synchrotech","offers":[{"title":"Default Title","offer_id":47317803827496,"sku":"SYN109B","price":292.4,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/5767\/7352\/files\/synchrotech-1st-5th-brass-synchro-set-honda-prelude-h22-m2y4-m2f4-m2a4-synchros-rebuild-kits-418.webp?v=1716470926"},{"product_id":"synchrotech-carbon-synchro-sleeve-set-honda-prelude-h22-h23-92-01","title":"Synchrotech Carbon Synchro Sleeve Set Honda Prelude H22 H23 92-01","description":"\u003cp\u003eImprove shifting response with the MFactory R\u0026amp;D (Synchrotech®) Carbon Sleeve Set\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eRecognising the extremely high cost of OEM replacement synchroniser parts, MFactory R\u0026amp;D (Synchrotech®) have took it upon themselves to design and develop their own range of high performance OEM replacement parts.\u003c\/p\u003e\n\u003cp\u003eForged from a higher tensile steel, our Sliders are both stronger and lighter than the OEM equivalent.\u003c\/p\u003e\n\u003cp\u003eFor the synchros, we utilize a carbon-carbon lining technology initially developed for the Aerospace Industry which acts as braking material during gear engagement. This allows for quicker and more precise shifting and prolongs the life of your gear set.\u003c\/p\u003e\n\u003cp\u003eAfter several years of Research \u0026amp; Development on our championship winning race cars, we are proud to offer the \u003cstrong\u003emost technologically advanced\u003c\/strong\u003e Synchros \u0026amp; Sliders on the market.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSliders are Forged from high tensile steel\u003c\/li\u003e\n\u003cli\u003eSynchros are made from high strength Japanese brass\u003c\/li\u003e\n\u003cli\u003eSynchros are Carbon-Carbon Lined (not just a coating!) for increased durability\u003c\/li\u003e\n\u003cli\u003e100% larger surface contact area for increase performance\u003c\/li\u003e\n\u003cli\u003eMore aggressive lock angle for effortless high rpm shifting\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Synchrotech","offers":[{"title":"5th-Reverse","offer_id":47317804712232,"sku":"SO-H22-5C","price":204.66,"currency_code":"GBP","in_stock":true},{"title":"3rd-4th","offer_id":47317804745000,"sku":"SO-H22-3C","price":265.81,"currency_code":"GBP","in_stock":true},{"title":"1st-2nd","offer_id":47317804777768,"sku":"SO-H22-1C","price":365.51,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/5767\/7352\/files\/synchrotech-carbon-synchro-sleeve-set-honda-prelude-h22-h23-92-01-5th-reverse-synchros-rebuild-kits-529.webp?v=1745123711"},{"product_id":"synchrotech-carbon-synchro-sleeve-set-honda-accord-h22-h23-92-01","title":"Synchrotech Carbon Synchro Sleeve Set Honda Accord H22 H23 92-01","description":"\u003cp\u003eImprove shifting response with the MFactory R\u0026amp;D (Synchrotech®) Carbon Sleeve Set\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eRecognising the extremely high cost of OEM replacement synchroniser parts, MFactory R\u0026amp;D (Synchrotech®) have took it upon themselves to design and develop their own range of high performance OEM replacement parts.\u003c\/p\u003e\n\u003cp\u003eForged from a higher tensile steel, our Sliders are both stronger and lighter than the OEM equivalent.\u003c\/p\u003e\n\u003cp\u003eFor the synchros, we utilize a carbon-carbon lining technology initially developed for the Aerospace Industry which acts as braking material during gear engagement. This allows for quicker and more precise shifting and prolongs the life of your gear set.\u003c\/p\u003e\n\u003cp\u003eAfter several years of Research \u0026amp; Development on our championship winning race cars, we are proud to offer the \u003cstrong\u003emost technologically advanced\u003c\/strong\u003e Synchros \u0026amp; Sliders on the market.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSliders are Forged from high tensile steel\u003c\/li\u003e\n\u003cli\u003eSynchros are made from high strength Japanese brass\u003c\/li\u003e\n\u003cli\u003eSynchros are Carbon-Carbon Lined (not just a coating!) for increased durability\u003c\/li\u003e\n\u003cli\u003e100% larger surface contact area for increase performance\u003c\/li\u003e\n\u003cli\u003eMore aggressive lock angle for effortless high rpm shifting\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Synchrotech","offers":[{"title":"5th-Reverse","offer_id":47317804810536,"sku":"SYN-SO-H22-5C-1","price":204.66,"currency_code":"GBP","in_stock":true},{"title":"3rd-4th","offer_id":47317804843304,"sku":"SO-H22-3C-1","price":265.81,"currency_code":"GBP","in_stock":true},{"title":"1st-2nd","offer_id":47317804876072,"sku":"SYN-SO-H22-1C-1","price":365.51,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/5767\/7352\/files\/synchrotech-carbon-synchro-sleeve-set-honda-accord-h22-h23-92-01-5th-reverse-synchros-rebuild-kits-539.webp?v=1716470987"},{"product_id":"synchrotech-carbon-synchro-sleeve-set-honda-prelude-h22-m2y4-m2f4-m2a4","title":"Synchrotech Carbon Synchro Sleeve Set Honda Prelude H22 M2Y4 M2F4 M2A4","description":"\u003cp\u003eImprove shifting response with the MFactory R\u0026amp;D (Synchrotech®) Carbon Sleeve Set\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eRecognising the extremely high cost of OEM replacement synchroniser parts, MFactory R\u0026amp;D (Synchrotech®) have took it upon themselves to design and develop their own range of high performance OEM replacement parts.\u003c\/p\u003e\n\u003cp\u003eForged from a higher tensile steel, our Sliders are both stronger and lighter than the OEM equivalent.\u003c\/p\u003e\n\u003cp\u003eFor the synchros, we utilize a carbon-carbon lining technology initially developed for the Aerospace Industry which acts as braking material during gear engagement. This allows for quicker and more precise shifting and prolongs the life of your gear set.\u003c\/p\u003e\n\u003cp\u003eAfter several years of Research \u0026amp; Development on our championship winning race cars, we are proud to offer the \u003cstrong\u003emost technologically advanced\u003c\/strong\u003e Synchros \u0026amp; Sliders on the market.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSliders are Forged from high tensile steel\u003c\/li\u003e\n\u003cli\u003eSynchros are made from high strength Japanese brass\u003c\/li\u003e\n\u003cli\u003eSynchros are Carbon-Carbon Lined (not just a coating!) for increased durability\u003c\/li\u003e\n\u003cli\u003e100% larger surface contact area for increase performance\u003c\/li\u003e\n\u003cli\u003eMore aggressive lock angle for effortless high rpm shifting\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Synchrotech","offers":[{"title":"1st-4th","offer_id":47317805662504,"sku":"SO-SYN109A","price":584.86,"currency_code":"GBP","in_stock":true},{"title":"1st-5th-Reverse","offer_id":47317805695272,"sku":"SO-SYN109","price":664.62,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/5767\/7352\/files\/synchrotech-carbon-synchro-sleeve-set-honda-prelude-h22-m2y4-m2f4-m2a4-1st-4th-synchros-rebuild-kits-760.webp?v=1745123855"},{"product_id":"synchrotech-master-rebuild-kit-honda-prelude-h22-m2y4-m2f4-m2a4","title":"Synchrotech Master Rebuild Kit Honda Prelude H22 M2Y4 M2F4 M2A4","description":"\u003cp\u003eImprove shifting response with the MFactory R\u0026amp;D (Synchrotech®) Carbon Rebuild Kit\u003cbr\u003e\u003cbr\u003eRecognising the extremely high cost of OEM replacement synchroniser parts, MFactory R\u0026amp;D (Synchrotech®) have took it upon themselves to design and develop their own range of high performance OEM replacement parts.\u003cbr\u003e\u003cbr\u003eFor the synchros, we utilize a carbon-carbon lining technology initially developed for the Aerospace Industry which acts as braking material during gear engagement. This allows for quicker and more precise shifting and prolongs the life of your gear set.\u003cbr\u003e\u003cbr\u003eAfter several years of Research \u0026amp; Development on our championship winning race cars, we are proud to offer the \u003cstrong\u003emost technologically advanced\u003c\/strong\u003e Synchros \u0026amp; Sliders on the market.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eKit Includes:\u003c\/strong\u003e\u003cbr\u003e- MFactory R\u0026amp;D (Synchrotech®) Carbon-Composite Synchros\u003cbr\u003e- MFactory R\u0026amp;D (Synchrotech®) Zinc-Plated Synchro Springs\u003cbr\u003e- OEM Mainshaft \u0026amp; Countershaft Bearings + C-Clip\u003cbr\u003e- OEM Oil Seals \u0026amp; Dust Boot\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSynchros are made from high strength Japanese brass\u003c\/li\u003e\n\u003cli\u003eSynchros are Carbon-Carbon Lined (not just a coating!) for increased durability\u003c\/li\u003e\n\u003cli\u003e100% larger surface contact area for increase performance\u003c\/li\u003e\n\u003cli\u003eMore aggressive lock angle for effortless high rpm shifting\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Synchrotech","offers":[{"title":"Default Title","offer_id":47317807890728,"sku":"MK-SYN109","price":1091.78,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/5767\/7352\/files\/synchrotech-master-rebuild-kit-honda-prelude-h22-m2y4-m2f4-m2a4-synchros-kits-252.webp?v=1745123665"},{"product_id":"synchrotech-carbon-rebuild-kit-honda-prelude-h22-m2y4-m2f4-m2a4-m2b4-t2t4-93-01","title":"Synchrotech Carbon Rebuild Kit Honda Prelude H22 M2Y4 M2F4 M2A4 M2B4 T2T4 93-01","description":"\u003cp\u003eImprove shifting response with the MFactory R\u0026amp;D (Synchrotech®) Carbon Rebuild Kit\u003cbr\u003e\u003cbr\u003eRecognising the extremely high cost of OEM replacement synchroniser parts, MFactory R\u0026amp;D (Synchrotech®) have took it upon themselves to design and develop their own range of high performance OEM replacement parts.\u003cbr\u003e\u003cbr\u003eFor the synchros, we utilize a carbon-carbon lining technology initially developed for the Aerospace Industry which acts as braking material during gear engagement. This allows for quicker and more precise shifting and prolongs the life of your gear set.\u003cbr\u003e\u003cbr\u003eAfter several years of Research \u0026amp; Development on our championship winning race cars, we are proud to offer the \u003cstrong\u003emost technologically advanced\u003c\/strong\u003e Synchros \u0026amp; Sliders on the market.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eKit Includes:\u003c\/strong\u003e\u003cbr\u003e- MFactory R\u0026amp;D (Synchrotech®) Carbon-Composite Synchros\u003cbr\u003e- MFactory R\u0026amp;D (Synchrotech®) Zinc-Plated Synchro Springs\u003cbr\u003e- OEM Mainshaft \u0026amp; Countershaft Bearings + C-Clip\u003cbr\u003e- OEM Oil Seals \u0026amp; Dust Boot\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSynchros are made from high strength Japanese brass\u003c\/li\u003e\n\u003cli\u003eSynchros are Carbon-Carbon Lined (not just a coating!) for increased durability\u003c\/li\u003e\n\u003cli\u003e100% larger surface contact area for increase performance\u003c\/li\u003e\n\u003cli\u003eMore aggressive lock angle for effortless high rpm shifting\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Synchrotech","offers":[{"title":"Default Title","offer_id":47317811298600,"sku":"BSK-SYN109","price":623.85,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/5767\/7352\/files\/synchrotech-carbon-rebuild-kit-honda-prelude-h22-m2y4-m2f4-m2a4-m2b4-t2t4-93-01-synchros-kits-599.webp?v=1745122883"},{"product_id":"synchrotech-brass-synchro-sleeve-set-honda-prelude-h22-h23-92-01","title":"Synchrotech Brass Synchro Sleeve Set Honda Prelude H22 H23 92-01","description":"\u003cp\u003eImprove shifting response with the MFactory R\u0026amp;D (Synchrotech®) Brass Sleeve Set\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eRecognising the extremely high cost of OEM replacement synchroniser parts, MFactory R\u0026amp;D (Synchrotech®) have took it upon themselves to design and develop their own range of high performance OEM replacement parts.\u003c\/p\u003e\n\u003cp\u003eForged from a higher tensile steel, our Sliders are both stronger and lighter than the OEM equivalent.\u003c\/p\u003e\n\u003cp\u003eFor the synchros, we utilize premium grade Japanese brass for quicker and more precise shifting and prolongs the life of your gear set.\u003c\/p\u003e\n\u003cp\u003eAfter several years of Research \u0026amp; Development on our championship winning race cars, we are proud to offer the \u003cstrong\u003emost technologically advanced\u003c\/strong\u003e Synchros \u0026amp; Sliders on the market.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSliders are Forged from high tensile steel\u003c\/li\u003e\n\u003cli\u003eSynchros are made from high strength Japanese brass\u003c\/li\u003e\n\u003cli\u003e100% larger surface contact area for increase performance\u003c\/li\u003e\n\u003cli\u003eMore aggressive lock angle for effortless high rpm shifting\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Synchrotech","offers":[{"title":"5th-Reverse","offer_id":47317812445480,"sku":"SO-H22-5B","price":175.41,"currency_code":"GBP","in_stock":true},{"title":"3rd-4th","offer_id":47317812478248,"sku":"SO-H22-3B","price":263.15,"currency_code":"GBP","in_stock":true},{"title":"1st-2nd","offer_id":47317812511016,"sku":"SO-H22-1B","price":336.26,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/5767\/7352\/files\/synchrotech-brass-synchro-sleeve-set-honda-prelude-h22-h23-92-01-5th-reverse-synchros-rebuild-kits-711.webp?v=1716471329"}],"url":"https:\/\/www.tegiwa.com\/collections\/honda-prelude-sh-performance-brake-discs-pads-upgrades.oembed","provider":"Tegiwa","version":"1.0","type":"link"}