{"title":"Audi RS3 8V Exhaust Systems, Sports Cats, Downpipes \u0026 Sensors","description":null,"products":[{"product_id":"eventuri-carbon-fibre-intake-gen-1-audi-8v-rs3","title":"Eventuri Carbon Fibre Intake (Gen 1) Audi 8V RS3","description":"\u003ch4\u003eAUDI 8V RS3 GEN 1\u003c\/h4\u003e\n\u003cp\u003e\u003cstrong\u003ePerformance Gain: 17-20hp, 22-25ft-lb\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003eV-Box Acceleration : 60-130mph Reduced By 0.3 Seconds\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Audi 8V RS3 Eventuri intake sets a new benchmark in aftermarket intake design for this platform. It was developed to achieve two objectives – 1) De-restrict the turbo inlet path. 2) Maintain low inlet temperatures. The first objective was met by using 88mm internal diameter tubing all the way to the turbo as well as using our unique Venturi housing to maintain laminar flow. The second objective was met by designing a sealed system to the stock cold air feed therefore ensuring the turbo does not draw heated air from the engine bay. The intake duct draws air from the stock feed and has been maximised in volume to allow the highest flow rate through the filter. The resulting performance gains and aesthetics are industry leading for the 8V RS3.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThe Eventuri Difference\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe 8V RS3 Eventuri system uses our Patent Pending Carbon fibre Housings which provide an aerodynamically efficient airflow path from the filter to the turbo tubing. Not just another cone filter with a heat shield but a unique design which invokes the Venturi affect. You can read more about the housing design and how it works \u003ca href=\"http:\/\/www.eventuri.net\/technology\/\"\u003eHERE\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eExtensive testing was carried out on this system both on the Dyno and road. Firstly the dyno tests were carried out showing an impressive gain of approximately 17hp and 25ft-lb of torque. The gain is not just at the peak but throughout the RPM range. This translates on the road to increased part throttle and full throttle response with the car pulling much more eagerly to the redline. The testing was done on the same day back-to-back and temperatures were monitored to ensure consistency. The car was tested firstly with the stock intake - hood closed. We then left the car on the dyno and installed the Eventuri. The car was then run again - hood closed. Several runs were carried out with both configurations to get a consistent result.\u003cbr\u003e\u003cbr\u003e\u003cimg src=\"https:\/\/farm5.staticflickr.com\/4420\/37151112482_a8b48eb799_b.jpg\" alt=\"\"\u003e\u003cbr\u003e\u003cbr\u003eWe then took the car for some road testing using a Vbox unit to record the acceleration from 60-130mph (also 100-200Km\/h). Testing was carried out on the same stretch of road - again on the same day to keep variables minimum. Results show that with just the intake added, the acceleration times from 60-130mph and also 100-200Km\/h reduced by approximately 0.3 seconds which is a significant change at such speeds.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eAcceleration results summary:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e60-130mph with Stock intake = 12.013 seconds\u003c\/li\u003e\n\u003cli\u003e60-130mph with Eventuri intake = 11.753 seconds\u003c\/li\u003e\n\u003cli\u003e100-200Km\/h with Stock intake = 10.271 seconds\u003c\/li\u003e\n\u003cli\u003e100-200Km\/h with Eventuri intake = 10.046 seconds\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003cbr\u003e\u003cimg src=\"https:\/\/farm5.staticflickr.com\/4375\/37133998466_8b3803b611_b.jpg\" alt=\"\"\u003e\u003cbr\u003e\u003cbr\u003e\u003cimg src=\"https:\/\/farm5.staticflickr.com\/4359\/37324465615_c5f6863708_b.jpg\" alt=\"\"\u003e\u003cbr\u003e\u003cbr\u003e\u003cimg src=\"https:\/\/farm5.staticflickr.com\/4348\/37133998256_e1916b7fe4_b.jpg\" alt=\"\"\u003e\u003cbr\u003e\u003cbr\u003e\u003cimg src=\"https:\/\/farm5.staticflickr.com\/4363\/37133998516_23f9ae3bb1_b.jpg\" alt=\"\"\u003e\u003cbr\u003e\u003cbr\u003eThe gains are from a combination of reasons:\u003cbr\u003e\u003cbr\u003e1) The sealed system keeps IATs low - the RS3 engine bay can get heat soaked very quickly so an open cone filter will cause an increase in IAT values resulting in a loss of performance.\u003cbr\u003e\u003cbr\u003e2) The Venturi housing provides a smooth transition from the filter to the intake tubes which are both matched to an internal diameter of 88mm. This helps the turbo to run more efficiently.\u003cbr\u003e\u003cbr\u003e3) The entire system is constructed from pure pre-preg carbon fibre which is great at insulating from heat.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePart Numbers:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eEVE-8VRS3-CF-RHD-INT\u003c\/strong\u003e : Audi 8V RS3 RHD Full Black Carbon intake Gen 1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEVE-8VRS3-CF-LHD-INT\u003c\/strong\u003e : Audi 8V RS3 LHD Full Black Carbon intake Gen 1\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/farm5.staticflickr.com\/4363\/36348846420_91663e766f_b.jpg\" alt=\"\"\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eThe Eventuri 8V RS3 intake system consists of a number of components engineered to perform a specific purpose and fabricated to the highest of standards. Here are the details for each component and the design ethos behind them:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eEach intake system consists of:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCarbon Fibre Venturi Filter Housing\u003c\/li\u003e\n\u003cli\u003eHigh Flow Urethane Cone Filters\u003c\/li\u003e\n\u003cli\u003eCarbon Fibre inlet Duct\u003c\/li\u003e\n\u003cli\u003eCarbon Fibre\u003c\/li\u003e\n\u003cli\u003eCarbon Fibre Connecting Tube\u003c\/li\u003e\n\u003cli\u003eLaser Cut Stainless Steel Brackets\u003c\/li\u003e\n\u003cli\u003eSilicon Couplers and Reducer\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eCarbon Intake Housing Assembly\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cimg src=\"https:\/\/farm5.staticflickr.com\/4359\/35910700464_032e02c37e_c.jpg\" alt=\"\"\u003e\u003cbr\u003e\u003cbr\u003eThe filter housing comprises of a high flow filter, aluminium cowl, laser cut brackets and the carbon pod itself. The carbon pods shroud the reverse mounted filter and smoothly shape the airflow down to the intake tubes. This smooth reduction in cross sectional area invokes the Venturi effect where the airflow accelerates whilst maintaining laminar conditions. It can be thought of as a large velocity stack - below is a diagram to show the comparison between our patent pending design and a regular intake system. Further details can be read in the Technology page.\u003cbr\u003e\u003cbr\u003e\u003cimg src=\"https:\/\/farm5.staticflickr.com\/4832\/31975515988_d7679dbff3_b.jpg\" alt=\"\"\u003e\u003cbr\u003e\u003cbr\u003e\u003ca href=\"https:\/\/imgflip.com\/gif\/2gt5e6\"\u003e\u003cimg title=\"made at imgflip.com\" src=\"https:\/\/i.imgflip.com\/2gt5e6.gif\"\u003e\u003c\/a\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eCarbon Fibre Intake Duct\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cimg src=\"https:\/\/farm5.staticflickr.com\/4369\/36348850710_ec8484727c_c.jpg\" alt=\"\"\u003e\u003cbr\u003e\u003cbr\u003eThe duct channels ambient air from the slam panel area to the filter housing. It fits inside the OEM ducting system and smoothly transitions to the circular filter housing shape. In order to ensure a good seal against engine bay heat - it also has a flexible rubber edging around the opening which presses against the filter housings creating the desired seal yet allowing the housing to move with the engine. The duct was designed to have the maximum internal volume possible within the given geometry of the engine bay. This ensures that the filter housing is able to draw with minimum restriction.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eCarbon Fibre Intake Tubes\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cimg src=\"https:\/\/farm5.staticflickr.com\/4331\/36348848100_e26edb6509_c.jpg\" alt=\"\"\u003e\u003cbr\u003e\u003cbr\u003e\u003cimg src=\"https:\/\/farm5.staticflickr.com\/4408\/36348849300_01e8b2acda_c.jpg\" alt=\"\"\u003e\u003cbr\u003e\u003cbr\u003eOur intake tubes are again crafted from 100% prepreg carbon fibre. Each tube has an internal diameter of 88mm - the stock tubing is just 77mm in diameter. This enlarged diameter allows the turbo to operate with less restriction and also allows larger\/hybrid turbos to run even better. The tubes smoothly carry the airflow to the turbo by ensuring there are no sharp or sudden bends. The smooth bend geometry ensures laminar flow is maintained from the filters to the exits.\u003cbr\u003e\u003cbr\u003eThe combined system ensures that airflow remains full and consistent to the turbo - minimising the occurrence of turbulence. The following flow simulation shows how smooth and full the flow is within the inlet tubes before the turbo. There is some circulation in the duct as is expected but once the flow enters the tubing, this is smoothed out and allows the turbo to operate more efficiently.\u003cbr\u003e\u003cbr\u003e\u003ciframe src=\"https:\/\/gifs.com\/embed\/audi-rs3-cfd-1jxBQG\" width=\"640px\" height=\"360px\" frameborder=\"0\" scrolling=\"no\" data-mce-fragment=\"1\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e","brand":"Eventuri","offers":[{"title":"LHD","offer_id":47195134427432,"sku":"EVE-8VRS3-CF-LHD-INT","price":1728.0,"currency_code":"GBP","in_stock":true},{"title":"RHD","offer_id":47195134460200,"sku":"EVE-8VRS3-CF-RHD-INT","price":1728.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/5767\/7352\/files\/eventuri-carbon-fibre-intake-gen-1-audi-8v-rs3-lhd-induction-kit-airbox-583.webp?v=1745073653"},{"product_id":"eventuri-carbon-fibre-intake-gen-2-audi-rs3-8v-ttrs-8s-daza-dwna","title":"Eventuri  Carbon Fibre Intake (Gen 2) Audi RS3 8V TTRS 8S DAZA DWNA","description":"\u003ch4\u003eAUDI 8V RS3 TTRS GEN 2\u003c\/h4\u003e\n\u003cp\u003e\u003cstrong\u003ePerformance Gain (RS3 with Stock Turbo): 15-18hp, 19-23ft-lb\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003ePerformance Gain (RS3 with Hybrid Turbo): 25-30hp, 20-24ft-lb\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003eFlow Bench Data: Stock Intake 530 CFM : Eventuri Intake 840 CFM\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eFitment: RS3 8V Gen 2 and TTRS 8S including the 2019 OPF DWNA versions.\u003c\/p\u003e\n\u003cp\u003eWith the 8V RS3 Gen 2 and TTRS 8S platforms being widely used for high power builds, we have developed a groundbreaking intake system to support even those exceeding the 1000whp mark. This intake system has been developed to offer the highest possible flow rate whilst maintaining the lowest intake temperatures possible. Each component has been designed to provide the turbo with a smooth and free flowing path. The intake tube has an internal diameter of 103mm or just over 4″ and has a smooth curvature from the filter housing all the way to the turbo inlet. The filter itself has been specifically designed for this intake and has a huge outer diameter of 210mm or 8.3″ with a filtration surface area of over 130,000mm^2. The patented Venturi housing has been designed to provide the maximum internal volume possible for the RS3 engine bay space available and provides laminar flow to the turbo tube. Finally the duct seals the filter opening to the front slam panel but is not restricted by just the stock entry feed. We have lifted the front of the duct to now provide an extra opening behind the hood which is equivalent to an extra 7″ diameter hole for the intake to draw from. The resulting system has the capability of flowing 840 CFM at 28″ H2O while keeping intake temperatures at a minimum with the sealed design.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThe Eventuri Difference\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe 8V RS3\/TTRS Eventuri system uses our Patented Carbon fibre Housings which provide an aerodynamically efficient airflow path from the filter to the turbo tubing. Not just another cone filter with a heat shield but a unique design which invokes the Venturi affect. You can read more about the housing design and how it works \u003ca href=\"http:\/\/www.eventuri.net\/technology\/\"\u003eHERE\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFlow Bench Testing\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eWe conducted flow rate tests using a Superflow SF-1020 to measure the maximum flow rate possible at a pressure drop of 28” H2O. Tests were done on the same day in controlled conditions using the same test jig for each system. We tested our full intake system against the stock airbox system. The results show just how restrictive the stock airbox is, which we have managed to improve by up to 58% in maximum possible flow rate. Importantly this has been achieved with a sealed intake system so the intake temperatures will also be maintained at a minimum.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cimg src=\"https:\/\/live.staticflickr.com\/65535\/48991219168_e1e5b821d7_b.jpg\" alt=\"\"\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDyno Testing\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eOur Stage 3 Intake has been tested by various reputable tuners globally who have been building high powered RS3\/TTRS projects for road and track use. The first set of results are from BR Performance Netherlands who tested our system on a TTRS equipped with a TTE700 hybrid turbo. Tests were done on the same day back to back with the hood closed. They tested the stock airbox against our stage 3 intake and also with the addition of our 4\" turbo inlet tube which is an additional product - details can be seen on our Audi products page.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDyno Results Summary:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eStock Airbox with Modified Stock Turbo Inlet for TTE700 = 576.5 HP\u003c\/li\u003e\n\u003cli\u003eEventuri Stage 3 Intake with Modified Stock Turbo Inlet for TTE700 = 606.5 HP\u003c\/li\u003e\n\u003cli\u003eEventuri Stage 3 Intake with Eventuri Turbo Inlet for TTE700 = 620.8 HP\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003cbr\u003e\u003cimg src=\"https:\/\/live.staticflickr.com\/65535\/48890569963_2dee368632_b.jpg\" alt=\"\"\u003e\u003cbr\u003e\u003cbr\u003eOur stage 3 intake has also been tested on full frame turbo builds pushing the limits of the DAZA engine. Recent tests from Eurocharged Canada used our stage 3 intake to achieve 1010whp which further proves the flow capability of the Eventuri system. During testing, Eurocharged tuners commented that they were able to make more power at a lower boost setting using our stage 3 intake in comparison to other systems they had been using. Their RS3 has already achieved a 9.1 second quarter mile pass with a 160mph terminal speed and are well set to go under 9 seconds soon.\u003cbr\u003e\u003cbr\u003e\u003cimg src=\"https:\/\/live.staticflickr.com\/65535\/48990327911_10f4ff00a2_b.jpg\" alt=\"\"\u003e\u003cbr\u003e\u003cbr\u003eThe gains are from a combination of reasons:\u003cbr\u003e\u003cbr\u003e1) The sealed system keeps IATs low - the RS3 engine bay can get heat soaked very quickly so an open cone filter will cause an increase in IAT values resulting in a loss of performance.\u003cbr\u003e\u003cbr\u003e2) The Venturi housing provides a smooth transition from the filter to the intake tubes which are both matched to an internal diameter of 103mm. This helps the hybrid and full frame turbo setups to run more efficiently.\u003cbr\u003e\u003cbr\u003e3) The entire system is constructed from pure pre-preg carbon fibre which is great at insulating from heat and has smooth internal surfaces as opposed to fibreglass which will have sharp resin lines present.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePart Numbers:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eEVE-ST38V8S-CF-INT\u003c\/strong\u003e : Audi RS3 Gen 2 \/ TTRS 8S intake for DAZA and DWNA Engines\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/live.staticflickr.com\/65535\/48944107668_f641d5a389_b.jpg\" alt=\"\"\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eThe Eventuri RS3 8V \/ TTRS 8S intake system consists of a number of components engineered to perform a specific purpose and fabricated to the highest of standards. We use 100% pre-preg carbon fiber with no fibreglass which means we can achieve a smooth internal surface to maintain smoother airflow. Here are the details for each component and the design ethos behind them:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eEach intake system consists of:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCarbon Fiber Patented Venturi Filter Housing with 103mm Outlet\u003c\/li\u003e\n\u003cli\u003eBespoke High Flow Dry Cone Filter\u003c\/li\u003e\n\u003cli\u003eCarbon Fiber Inlet Duct\u003c\/li\u003e\n\u003cli\u003eCarbon Fiber Tube with 103mm ID\u003c\/li\u003e\n\u003cli\u003eOPF (DWNA) Breather adapter\u003c\/li\u003e\n\u003cli\u003eHeat Shield with Gold Reflective Backing\u003c\/li\u003e\n\u003cli\u003eLaser Cut Stainless Steel Brackets\u003c\/li\u003e\n\u003cli\u003eSilicon Breather Hose\u003c\/li\u003e\n\u003cli\u003eSilicon Couplers and Reducer\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/live.staticflickr.com\/65535\/48992499227_c3b34ea438_b.jpg\" alt=\"\"\u003e\u003cbr\u003e\u003cbr\u003e\u003ciframe src=\"https:\/\/gifs.com\/embed\/audi-rs3-eventuri-stage-3-intake-91X6ZP?watermark=false\u0026amp;uid=517317\u0026amp;token=WXJKvPy6ULMbkDZ0qyHDtqMJ4jq%2BE9cGjyGJ%2FqeyTfU%3D\" width=\"1024px\" height=\"576px\" frameborder=\"0\" scrolling=\"no\" data-mce-fragment=\"1\"\u003e\u003c\/iframe\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003ePatented Venturi Filter Housing Assembly\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cimg src=\"https:\/\/live.staticflickr.com\/65535\/48944645146_646051b88a_b.jpg\" alt=\"\"\u003e\u003cbr\u003e\u003cbr\u003eThe Stage 3 filter housing comprises of a bespoke high flow filter, aluminium cowl, laser cut brackets and the carbon pod itself. The carbon pod shrouds the reverse mounted filter and smoothly shape the airflow down to the intake tubes. This smooth reduction in cross sectional area invokes the Venturi effect where the airflow accelerates whilst maintaining laminar conditions. It can be thought of as a large velocity stack - below is a diagram to show the comparison between our patented design and a regular intake system. Further details can be read in the Technology page.\u003cbr\u003e\u003cbr\u003e\u003cimg src=\"https:\/\/live.staticflickr.com\/65535\/48992031818_e2c15fe2b9_b.jpg\" alt=\"\"\u003e\u003cbr\u003e\u003cbr\u003e\u003cimg src=\"https:\/\/farm5.staticflickr.com\/4832\/31975515988_d7679dbff3_b.jpg\" alt=\"\"\u003e\u003cbr\u003e\u003cbr\u003e\u003ca href=\"https:\/\/imgflip.com\/gif\/2gt5e6\"\u003e\u003cimg title=\"made at imgflip.com\" src=\"https:\/\/i.imgflip.com\/2gt5e6.gif\"\u003e\u003c\/a\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eBespoke Stage 3 Cone Filter\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cimg src=\"https:\/\/live.staticflickr.com\/65535\/48991698663_03ba7939d7_b.jpg\" alt=\"\"\u003e\u003cbr\u003e\u003cbr\u003eIn order to achieve the highest flow rate possible we had to redesign our stage 2 filter and increase the size to as large as was possible withing the RS3 engine bay area. The resulting filter has an outside diameter of 210mm or 8.3\" and when flow tested with just the carbon housing is able to flow up to 940 CFM at 28\" H2O. The filter medium is ISO tested to ensure that filtration is in line with OEM standards and is also dry. The filter is constructed with our signature flow cones to aid in the Venturi housing principle.\u003cbr\u003e\u003cbr\u003e\u003cimg src=\"https:\/\/live.staticflickr.com\/65535\/48992443212_73344eaa95_b.jpg\" alt=\"\"\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eCarbon Fiber Intake Duct\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cimg src=\"https:\/\/live.staticflickr.com\/65535\/48944106273_89517c8e25_b.jpg\" alt=\"\"\u003e\u003cbr\u003e\u003cbr\u003eThe duct channels ambient air from the slam panel area to the filter housing. It fits inside the OEM ducting system and smoothly transitions to the circular filter housing shape. In order to ensure a good seal against engine bay heat - it also has a flexible rubber edging around the opening which presses against the filter housings creating the desired seal yet allowing the housing to move with the engine. Since this was designed to support high power builds, we found that the stock openings in the slam panel could cause a restriction at high flow demand. So we lifted the top surface of the duct and created an opening above the slam panel which is able to draw in cold air from behind the hood shut. This extra opening is equivalent to a hole with a diameter of over 7\" and completely derestricts the stock cold air feed. The stage 3 duct was designed to have the maximum internal volume possible within the given geometry of the engine bay. This ensures that the filter housing is able to draw with minimum restriction.\u003cbr\u003e\u003cbr\u003eWe also made sure that the stage 3 duct is compatible with larger aftermarket throttle bodies.\u003cbr\u003e\u003cbr\u003e\u003cimg src=\"https:\/\/live.staticflickr.com\/65535\/48991971918_133056c392_b.jpg\" alt=\"\"\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eCarbon Fiber Intake Tube\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cimg src=\"https:\/\/live.staticflickr.com\/65535\/48944104663_d98a77c3aa_b.jpg\" alt=\"\"\u003e\u003cbr\u003e\u003cbr\u003eThe intake tube is crafted from 100% prepreg carbon fiber and so as mentioned the internal surface is smooth and the carbon weave can be seen. The stage 3 tube has an internal diameter of 103mm or 4\" and has a smoooth curvature to minimise pressure drop. It channels airflow from the Venturi housing to the turbo inlet. The smooth bend geometry ensures laminar flow is maintained from the filters to the exits.\u003cbr\u003e\u003cbr\u003e\u003cimg src=\"https:\/\/live.staticflickr.com\/65535\/48935389433_54a5d6248c_b.jpg\" alt=\"\"\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eHeat Shield\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cimg src=\"https:\/\/live.staticflickr.com\/65535\/48944840212_27910ec8c1_b.jpg\" alt=\"\"\u003e\u003cbr\u003e\u003cbr\u003e\u003cimg src=\"https:\/\/live.staticflickr.com\/65535\/48944099128_f0af1a984b_b.jpg\" alt=\"\"\u003e\u003cbr\u003e\u003cbr\u003eDue to the intense heat generated by the turbo, we designed a heat shield to protect the carbon tube. The shield is powder coated black but has a gold reflective layer on the base which deflects radiation heat from the turbo and catalyst. It has a stainless steel brace to provide rigidity and curves around the back of the tube to deflect convective heat away. Please note - this shield may not fit some full frame turbo systems with a different exhaust manifold. \u003cstrong\u003eOPF (DWNA) Adapter\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cimg src=\"https:\/\/live.staticflickr.com\/65535\/48992731321_ee7f6b311a_b.jpg\" alt=\"\"\u003e\u003cbr\u003e\u003cbr\u003eWe have 2 separate stage 3 intake systems, one will fit the DAZA engine and the other will fit the new 2019 DWNA engine using an adapter and custom breather hose. Please check your engine to make sure you order the correct intake for your car. Here is the difference between the 2 engines:\u003cbr\u003e\u003cbr\u003e\u003cimg src=\"https:\/\/live.staticflickr.com\/65535\/48995341461_1de3bdcd10_b.jpg\" alt=\"\"\u003e\u003c\/p\u003e","brand":"Eventuri","offers":[{"title":"Default Title","offer_id":47195134591272,"sku":"EVE-ST38V8S-CF-INT","price":1800.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/5767\/7352\/files\/eventuri-carbon-fibre-intake-gen-2-audi-rs3-8v-ttrs-8s-daza-dwna-induction-kit-airbox-375.webp?v=1749034322"},{"product_id":"eventuri-carbon-fibre-engine-cover-audi-rs3-8v-8y-ttrs-8s-rsq3-f3","title":"Eventuri Carbon Fibre Engine Cover Audi RS3 8V 8Y TTRS 8S RSQ3 F3","description":"\u003ch4\u003eAUDI RS3 ENGINE COVER\u003c\/h4\u003e\n\u003cp\u003eMade from prepreg carbon fibre and kevlar – this engine cover is a direct replacement for the RS3\/RSQ3\/TTRS Facelift cars.\u003c\/p\u003e\n\u003cp\u003eThe photos also show our intake system installed in an RS3.\u003c\/p\u003e","brand":"Eventuri","offers":[{"title":"Default Title","offer_id":47195135410472,"sku":"EVE-ST38V8S-CF-ENG","price":600.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/5767\/7352\/files\/eventuri-carbon-fibre-engine-cover-audi-rs3-8v-8y-ttrs-8s-rsq3-f3-514.webp?v=1745074551"},{"product_id":"eventuri-carbon-fibre-turbo-inlet-audi-rs3-8v-8y-ttrs-8s","title":"Eventuri Carbon Fibre Turbo Inlet Audi RS3 8V 8Y TTRS 8S","description":"\u003ch4\u003eAUDI RS3 TTRS TURBO INLET\u003c\/h4\u003e\n\n\u003cp\u003e\u003cstrong\u003ePerformance Gain (RS3 with Hybrid Turbo): 14-20hp, 30-35ft-lb\u003c\/strong\u003e\u003cbr\u003e\n\u003cstrong\u003eFlow Rate increase at 24″ H2O : 42% increase over stock (Using Stock Flange)\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eFitment for RS3 8V Gen 2, 8Y RS3, F3 RSQ3 and TTRS 8S Left and Right hand drive. Finished in raw carbon – no clearcoat.\u003c\/p\u003e\n\n\u003cp\u003eOptional Turbo flanges available for popular hybrid turbos.\u003c\/p\u003e\n\n\u003cp\u003ePresenting a World First – an all carbon RS3\/TTRS turbo inlet elbow. We have invested months of intense R\u0026amp;D in developing an inlet which leaves no room for compromise. VOLUME – FLOW QUALITY – TEMPERATURE are the 3 main design criteria which we sought to meet.\u003c\/p\u003e\n\n\u003cp\u003e1) VOLUME : Inlet Diameters – Eventuri 103mm : Stock 72mm. Outlet Diameters – Eventuri 74mm : Stock 56.4mm. Clearly with significantly larger internal diameter sizes, the Eventuri elbow encapsulates a much larger internal volume which de-restricts the flow path to the turbo.\u003c\/p\u003e\n\n\u003cp\u003e2) FLOW QUALITY : Having just a large internal volume is no good unless the flow path also allows for smooth airflow to the turbo. By using high temperature Prepreg Carbon Fiber we have managed to achieve a smooth internal surface. In contrast, the stock and other aftermarket elbows are all made from cast aluminium which end up with a rough internal surface. This coupled with the smooth curvature of the elbow results in a flow path which minimises turbulence.\u003c\/p\u003e\n\n\u003cp\u003e3) TEMPERATURE : The final criteria was to minimise the conduction of heat into the airflow. The stock inlet is directly connected to the turbo and so immediately conducts heat as the turbo spools. Our system uses a machined flange which connects to the turbo and then a silicon coupler with an integrated thermal spacer to keep the carbon elbow from having direct contact with the turbo. This barrier coupled with the low through-thickness thermal conductivity of carbon fiber results in less heat being transferred to the airflow.\u003c\/p\u003e","brand":"Eventuri","offers":[{"title":"No Flange (LHD)","offer_id":47195207926056,"sku":"EVE-TRB8V8S-LHD-NIL","price":600.0,"currency_code":"GBP","in_stock":true},{"title":"No Flange (RHD)","offer_id":47195207958824,"sku":"EVE-TRB8V8S-RHD-NIL","price":600.0,"currency_code":"GBP","in_stock":true},{"title":"FLANGE ONLY - Stock Turbo","offer_id":47195207991592,"sku":"EVE-TRB8V8S-FLG-STK","price":48.0,"currency_code":"GBP","in_stock":true},{"title":"FLANGE ONLY - TTE700\/TTE625","offer_id":47195208024360,"sku":"EVE-TRB8V8S-FLG-TTE","price":48.0,"currency_code":"GBP","in_stock":true},{"title":"FLANGE ONLY - SRM GTX","offer_id":47195208057128,"sku":"EVE-TRB8V8S-FLG-SRM","price":48.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/5767\/7352\/files\/eventuri-carbon-fibre-turbo-inlet-audi-rs3-8v-8y-ttrs-8s-no-flange-lhd-intake-pipes-689.webp?v=1745075454"},{"product_id":"maxton-design-front-splitter-v-1-audi-rs3-8va-sportback-pre-facelift-15-16","title":"Maxton Design Front Splitter V.1 Audi RS3 8VA Sportback Pre-facelift 15-16","description":"\u003cp\u003e\u003cspan\u003e\u003cspan\u003eFRONT SPLITTER V.1 AUDI RS3 8VA SPORTBACK PRE-FACELIFT\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan\u003e\u003cu\u003eFITS ONLY:\u003c\/u\u003e\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003eAudi RS3 8VA Sportback Pre-Facelift (2015-2016)\u003c\/p\u003e\u003cp\u003e\u003cspan\u003e\u003cu\u003eCOMPLETE SET CONTAINS:\u003c\/u\u003e\u003c\/span\u003e\u003cbr\u003e-\u0026gt; Splitter\/Front Bumper Lip Spoiler\u003cbr\u003e-\u0026gt; Mounting Kit\u003cbr\u003e-\u0026gt; Mounting Manual\u003cbr\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan\u003eFitting manual: \u003c\/span\u003e\u003ca\u003ehttps:\/\/www.maxtondesign.co.uk\/pdf\/splitter_fitting-manual-maxton.pdf\u003c\/a\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan\u003e\u003c\/span\u003e\u003cspan\u003e\u003cspan\u003ePlease note, the majority of our products are made from ABS plastic, the flexibility of these products provides them the ability to withstand some pressure.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e\u003c\/span\u003e\u003cspan\u003e\u003cspan\u003eWe highly recommend installations are completed by a professional to ensure the product is fitted correctly and according to our fitting manuals.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003cspan\u003e\u003cbr\u003e\u003c\/span\u003eIf you are unsure about the stock availability of a product(s), we would encourage you send us an email to sales@maxtondesign.co.uk and we’ll get back to you ASAP.\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eWe can only accept a return within 30 days of delivery, if the product is in its original condition including protective film still on. A refund will be processed excluding shipping costs.\u003cbr\u003e\u003cbr\u003e\u003c\/span\u003eAll products arrive with a protective film, this is a very thin plastic vacuum sealed around the product to avoid the item sustaining any damage. Once removed you will notice the product does not have any scuffs or scratches. \u003c\/p\u003e","brand":"Maxton Design","offers":[{"title":"Gloss Black","offer_id":47326414438696,"sku":"MXT-AU-RS3-8V-FD1G","price":174.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/5767\/7352\/files\/maxton-design-front-splitter-v-1-audi-rs3-8va-sportback-pre-facelift-15-16-gloss-black-splitters-skirts-diffusers-140.webp?v=1745138459"},{"product_id":"maxton-design-front-splitter-v-2-audi-rs3-8va-sportback-pre-facelift-15-16","title":"Maxton Design Front Splitter V.2 Audi RS3 8VA Sportback Pre-facelift 15-16","description":"\u003cp\u003e\u003cspan\u003e\u003cspan\u003eFRONT SPLITTER V.2 \u003c\/span\u003e\u003c\/span\u003e\u003cspan\u003eAUDI RS3 8VA SPORTBACK PRE-FACELIFT (2015-2016)\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan\u003e\u003cu\u003eFITS ONLY:\u003c\/u\u003e\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003eAudi RS3 8VA Sportback Pre-Facelift (2015-2016)\u003c\/p\u003e\u003cp\u003e\u003cspan\u003e\u003cu\u003eCOMPLETE SET CONTAINS:\u003c\/u\u003e\u003c\/span\u003e\u003cbr\u003e-\u0026gt; Splitter\/Front Bumper Lip Spoiler\u003cbr\u003e-\u0026gt; Mounting Kit\u003cbr\u003e-\u0026gt; Mounting Manual\u003cbr\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan\u003eFitting manual: \u003c\/span\u003e\u003ca\u003ehttps:\/\/www.maxtondesign.co.uk\/pdf\/splitter_fitting-manual-maxton.pdf\u003c\/a\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan\u003e\u003c\/span\u003e\u003cspan\u003e\u003cspan\u003ePlease note, the majority of our products are made from ABS plastic, the flexibility of these products provides them the ability to withstand some pressure.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e\u003c\/span\u003e\u003cspan\u003e\u003cspan\u003eWe highly recommend installations are completed by a professional to ensure the product is fitted correctly and according to our fitting manuals.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003cspan\u003e\u003cbr\u003e\u003c\/span\u003eIf you are unsure about the stock availability of a product(s), we would encourage you send us an email to sales@maxtondesign.co.uk and we’ll get back to you ASAP.\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eWe can only accept a return within 30 days of delivery, if the product is in its original condition including protective film still on. A refund will be processed excluding shipping costs.\u003cbr\u003e\u003cbr\u003e\u003c\/span\u003eAll products arrive with a protective film, this is a very thin plastic vacuum sealed around the product to avoid the item sustaining any damage. Once removed you will notice the product does not have any scuffs or scratches. \u003c\/p\u003e","brand":"Maxton Design","offers":[{"title":"Gloss Black","offer_id":47326414537000,"sku":"MXT-AU-RS3-8V-FD2G","price":174.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/5767\/7352\/files\/maxton-design-front-splitter-v-2-audi-rs3-8va-sportback-pre-facelift-15-16-gloss-black-splitters-skirts-diffusers-983.webp?v=1745140403"},{"product_id":"maxton-design-side-skirts-diffusers-audi-rs3-8va-pre-facelift-15-16","title":"Maxton Design Side Skirts Diffusers Audi RS3 8VA Pre-facelift 15-16","description":"\u003cp\u003eSIDE SKIRTS DIFFUSERS AUDI RS3 8VA PRE-FACELIFT (2015-2016)\u003c\/p\u003e\u003cp\u003e\u003cu\u003e\u003cspan\u003e\u003cspan\u003eFits Only:\u003c\/span\u003e\u003c\/span\u003e\u003c\/u\u003e\u003cspan\u003e \u003cbr\u003e\u003cspan\u003eAUDI RS3 8VA PRE-FACELIFT (2015-2016)\u003c\/span\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan\u003e\u003cu\u003e\u003cspan\u003e\u003cspan\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/u\u003e\u003c\/span\u003e\u003cspan\u003e\u003cu\u003eCOMPLETE SET CONTAINS:\u003c\/u\u003e\u003c\/span\u003e\u003cbr\u003e-\u0026gt; Side Skirt Splitters\u003cbr\u003e-\u0026gt; Mounting Kit\u003cbr\u003e-\u0026gt; Mounting Manual\u003cbr\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan\u003eFitting manual: \u003c\/span\u003e\u003ca\u003ehttps:\/\/www.maxtondesign.co.uk\/pdf\/side-skirts-diffusers_fitting-manual-maxton.pdf\u003c\/a\u003e\u003ca\u003e\u003cbr\u003e\u003c\/a\u003e\u003cspan\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan\u003e\u003c\/span\u003e\u003cspan\u003e\u003cspan\u003ePlease note, the majority of our products are made from ABS plastic, the flexibility of these products provides them the ability to withstand some pressure.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e\u003c\/span\u003e\u003cspan\u003e\u003cspan\u003eWe highly recommend installations are completed by a professional to ensure the product is fitted correctly and according to our fitting manuals.\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003eWe can only accept a return within 30 days of delivery, if the product is in its original condition including protective film still on. A refund will be processed excluding shipping costs.\u003cbr\u003e\u003cspan\u003e\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eAll products arrive with a protective film, this is a very thin plastic vacuum sealed around the product to avoid the item sustaining any damage. Once removed you will notice the product does not have any scuffs or scratches. \u003c\/span\u003e\u003c\/p\u003e","brand":"Maxton Design","offers":[{"title":"Gloss Black","offer_id":47326414635304,"sku":"MXT-AU-RS3-8V-SD1G","price":174.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/5767\/7352\/files\/maxton-design-side-skirts-diffusers-audi-rs3-8va-pre-facelift-15-16-gloss-black-splitters-501.webp?v=1745143613"},{"product_id":"maxton-design-front-racing-splitter-audi-rs3-8va-sportback-pre-facelift-15-16","title":"Maxton Design Front Racing Splitter Audi RS3 8VA Sportback Pre-facelift 15-16","description":"\u003cp\u003eFRONT RACING SPLITTER AUDI RS3 8VA SPORTBACK PRE-FACELIFT (2015-2016)\u003c\/p\u003e\u003cp\u003e\u003cu\u003e\u003cspan\u003eFits Only:\u003c\/span\u003e\u003c\/u\u003e\u003cspan\u003e  \u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eAUDI RS3 8VA SPORTBACK PRE-FACELIFT (2015-2016)\u003c\/span\u003e\u003cbr\u003e\u003c\/p\u003e\u003cp\u003e\u003cu\u003e\u003cspan\u003e\u003cbr\u003e\u003cspan\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/u\u003e\u003cu\u003e\u003cspan\u003eCOMPLETE SET CONTAINS\u003c\/span\u003e\u003cspan\u003e:\u003c\/span\u003e\u003c\/u\u003e\u003cbr\u003e\u003cspan\u003e-\u0026gt; Splitter\/Front Bumper Lip Spoiler\u003cbr\u003e-\u0026gt; Mounting Kit\u003cbr\u003e-\u0026gt; Mounting Manual\u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan\u003eFitting manual:  \u003c\/span\u003e\u003ca\u003e\u003cspan\u003ehttps:\/\/www.maxtondesign.co.uk\/pdf\/splitter_fitting-manual-maxton.pdf\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan\u003e\u003c\/span\u003e\u003cspan\u003e\u003cspan\u003ePlease note, the majority of our products are made from ABS plastic, the flexibility and thickness of our racing products allows for added durability.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e\u003c\/span\u003e\u003cspan\u003eWe highly recommend installations are completed by a professional to ensure the product is fitted correctly and according to our fitting manuals.\u003c\/span\u003e\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e\u003c\/span\u003e\u003cspan\u003eWe can only accept a return within 30 days of delivery, if the product is in its original condition including protective film still on. A refund will be processed excluding shipping costs.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e\u003c\/span\u003e\u003cspan\u003e\u003cspan\u003eAll products arrive with a protective film, this is a very thin plastic vacuum sealed around the product to avoid the item sustaining any damage. Once removed you will notice the product does not have any scuffs or scratches.  \u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e","brand":"Maxton Design","offers":[{"title":"Default Title","offer_id":47326414700840,"sku":"MXT-AU-RS3-8V-CNC-FD1A","price":159.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/5767\/7352\/files\/maxton-design-front-racing-splitter-audi-rs3-8va-sportback-pre-facelift-15-16-splitters-skirts-diffusers-603.webp?v=1745145146"},{"product_id":"maxton-design-rear-diffuser-audi-rs3-8va-sportback-pre-facelift-15-16","title":"Maxton Design Rear Diffuser Audi RS3 8VA Sportback Pre-facelift 15-16","description":"\u003cp\u003eREAR DIFFUSER AUDI RS3 8VA SPORTBACK PRE-FACELIFT (2015-2016)\u003cspan\u003efits only:  \u003c\/span\u003e\u003c\/p\u003e\u003cp\u003eAUDI RS3 8VA SPORTBACK PRE-FACELIFT (2015-2016)\u003c\/p\u003e\u003cp\u003e\u003cspan\u003eCOMPLETE SET CONTAINS:\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan\u003e\u003ci\u003e\u003c\/i\u003e REAR DIFFUSER\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan\u003e\u003ci\u003e\u003c\/i\u003e Mounting kit\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan\u003eProduct is made of ABS plastic.\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cbr\u003e\u003cspan\u003eABS material was created specifically for use in the automotive industry.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eABS is used in production of factory bumpers and other car body parts.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eABS products are characterized with increased strength and flexibility.\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan\u003e\u003cspan\u003eThis product has been TUV MATERIALGUTACHTEN certified (TUV certify for material).\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e","brand":"Maxton Design","offers":[{"title":"Default Title","offer_id":47326414733608,"sku":"MXT-AU-RS3-8V-CNC-RS1A","price":159.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/5767\/7352\/files\/maxton-design-rear-diffuser-audi-rs3-8va-sportback-pre-facelift-15-16-splitters-skirts-diffusers-652.webp?v=1745143813"},{"product_id":"maxton-design-spoiler-cap-audi-rs3-8v-8v-fl-sportback-2015","title":"Maxton Design Spoiler CAP Audi RS3 8V 8V FL Sportback 2015-","description":"\u003cp\u003e\u003cspan\u003eSpoiler Cap Audi RS3 8V \/ 8V FL Sportback (2015-)\u003c\/span\u003e \u003c\/p\u003e\u003cp\u003e\u003cspan\u003e\u003cbr\u003e \u003c\/span\u003e\u003cu\u003e\u003cspan\u003eFits only:\u003c\/span\u003e\u003c\/u\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan\u003eAudi RS3 8V \/ 8V FL Sportback (2015-)\u003c\/span\u003e\u003cbr\u003e\u003c\/p\u003e\u003cp\u003e\u003cu\u003e\u003cspan\u003ePlease Note:\u003c\/span\u003e\u003c\/u\u003e\u003cspan\u003e\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan\u003e \u003c\/span\u003e\u003cspan\u003e** The removal of the holographic verification sticker will void a return, this identifies the item as an official and authentic Maxton Design product, removal is at buyer's risk. **\u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cu\u003e\u003cspan\u003eCOMPLETE SET CONTAINS:\u003c\/span\u003e\u003c\/u\u003e\u003cspan\u003e\u003cbr\u003e \u003c\/span\u003e\u003cspan\u003e-\u0026gt; Spoiler Extension with 3M Tape\u003cbr\u003e -\u0026gt; Degreasing Cloth\u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan\u003eFitting manuals: \u003c\/span\u003e\u003cu\u003e\u003cspan\u003e\u003ca\u003ehttps:\/\/www.maxtondesign.co.uk\/pdf\/cap-spoiler_fitting-manual-maxton.pdf\u003c\/a\u003e\u003c\/span\u003e\u003c\/u\u003e\u003cspan\u003e\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan\u003ePlease note, the majority of our products are made from ABS plastic, the flexibility of these products provides them the ability to withstand some pressure.\u003c\/span\u003e\u003cspan\u003e\u003cbr\u003e \u003cbr\u003e \u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan\u003e\u003cbr\u003e \u003c\/span\u003e\u003cspan\u003eWe highly recommend installations are completed by a professional to ensure the product is fitted correctly and according to our fitting manuals.\u003c\/span\u003e\u003cspan\u003e\u003cbr\u003e \u003c\/span\u003e\u003cspan\u003e\u003cbr\u003e \u003cbr\u003e \u003c\/span\u003e\u003cspan\u003eWe can only accept a return within 30 days of delivery, if the product is in its original condition including protective film still on. A refund will be processed excluding shipping costs.\u003c\/span\u003e\u003cspan\u003e\u003cbr\u003e \u003cbr\u003e \u003c\/span\u003e\u003cspan\u003eAll products arrive with a protective film, this is a very thin plastic vacuum sealed around the product to avoid the item sustaining any damage. Once removed you will notice the product does not have any scuffs or scratches. \u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\u003c\/p\u003e","brand":"Maxton Design","offers":[{"title":"Gloss Black","offer_id":47326414799144,"sku":"MXT-AU-RS3-8V-CAP1G","price":129.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/5767\/7352\/files\/maxton-design-spoiler-cap-audi-rs3-8v-fl-sportback-2015-gloss-black-spoilers-730.webp?v=1745139541"},{"product_id":"maxton-design-spoiler-cap-audi-rs3-8v-8v-facelift-sportback-15-20","title":"Maxton Design Spoiler CAP Audi RS3 8V 8V Facelift Sportback 15-20","description":"\u003cp\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan\u003eSPOILER CAP AUDI RS3 8V \/ 8V FACELIFT SPORTBACK\u003cbr\u003e\u003c\/span\u003e\u003cspan\u003e\u003cspan\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan\u003e\u003cspan\u003e\u003cbr\u003e\u003cu\u003e\u003cspan\u003eFits only:\u003c\/span\u003e\u003c\/u\u003e\u003c\/span\u003e\u003c\/span\u003e\u003cspan\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan\u003e\u003cspan\u003eAUDI RS3 8V\/ 8V FACELIFT SPORTBACK (2015-2020)\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cu\u003e\u003cspan\u003ePlease Note:\u003c\/span\u003e\u003c\/u\u003e\u003cspan\u003e\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan\u003e \u003c\/span\u003e\u003cspan\u003e** The removal of the holographic verification sticker will void a return, this identifies the item as an official and authentic Maxton Design product, removal is at buyer’s risk. **\u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cu\u003e\u003cspan\u003eCOMPLETE SET CONTAINS:\u003c\/span\u003e\u003c\/u\u003e\u003cspan\u003e\u003cbr\u003e \u003c\/span\u003e\u003cspan\u003e-\u0026gt; Spoiler Extension with 3M Tape\u003cbr\u003e -\u0026gt; Degreasing Cloth\u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan\u003eFitting manuals: \u003c\/span\u003e\u003cu\u003e\u003cspan\u003e\u003ca\u003ehttps:\/\/www.maxtondesign.co.uk\/pdf\/cap-spoiler_fitting-manual-maxton.pdf\u003c\/a\u003e\u003c\/span\u003e\u003c\/u\u003e\u003cspan\u003e\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan\u003ePlease note, the majority of our products are made from ABS plastic, the flexibility of these products provides them the ability to withstand some pressure.\u003c\/span\u003e\u003cspan\u003e\u003cbr\u003e \u003cbr\u003e \u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e \u003cspan\u003e\u003cbr\u003e \u003c\/span\u003e\u003cspan\u003eWe highly recommend installations are completed by a professional to ensure the product is fitted correctly and according to our fitting manuals.\u003c\/span\u003e\u003cspan\u003e\u003cbr\u003e \u003c\/span\u003e\u003cspan\u003e\u003cbr\u003e \u003cbr\u003e \u003c\/span\u003e\u003cspan\u003eWe can only accept a return within 30 days of delivery, if the product is in its original condition including protective film still on. A refund will be processed excluding shipping costs.\u003c\/span\u003e\u003cspan\u003e\u003cbr\u003e \u003cbr\u003e \u003c\/span\u003e\u003cspan\u003eAll products arrive with a protective film, this is a very thin plastic vacuum sealed around the product to avoid the item sustaining any damage. Once removed you will notice the product does not have any scuffs or scratches.\u003c\/span\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"Maxton Design","offers":[{"title":"Gloss Black","offer_id":47326414897448,"sku":"MXT-AU-RS3-8V-CAP1G-1","price":129.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/5767\/7352\/files\/maxton-design-spoiler-cap-audi-rs3-8v-facelift-sportback-15-20-gloss-black-spoilers-202.webp?v=1745138611"},{"product_id":"maxton-design-rear-valance-v-2-audi-rs3-8v-sportback-facelift-2017-up","title":"Maxton Design Rear Valance V.2 Audi RS3 8V Sportback Facelift 2017-UP","description":"\u003cp\u003eREAR VALANCE V.2 AUDI RS3 8V SPORTBACK FACELIFT (2017-UP)\u003c\/p\u003e\u003cp\u003e\u003cspan\u003e\u003cbr\u003e\u003cspan\u003e\u003cu\u003e\u003cspan\u003eFits Only: \u003c\/span\u003e\u003c\/u\u003e\u003c\/span\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan\u003eAUDI RS3 8V SPORTBACK FACELIFT (2017-UP)\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan\u003eThe only compatible rear side splitters with this product are - AU-RS3-8VF-RSD2\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan\u003eCOMPLETE SET CONTAINS:\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan\u003eRear Diffuser\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan\u003e\u003cspan\u003eThis product requires the removal of the original diffuser, self-tapping screws are needed to secure fitment of the new diffuser.\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan\u003e\u003cspan\u003eOur full fitting manual can be found here:\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan\u003e\u003cspan\u003e \u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003e\u003cspan\u003e\u003ca\u003ehttps:\/\/www.maxtondesign.co.uk\/pdf\/diffuser-no-clips-included-manual.pdf\u003c\/a\u003e\u003c\/span\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan\u003eCHARACTERISTICS:\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan\u003eAdds aesthetic value.\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan\u003eLightweight and offers some flexibility.\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan\u003eThis product is made from ABS plastic. The same material is used widely in the automotive industry.\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan\u003eMORE INFORMATION:\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan\u003eNo additional work is required to finish the product.\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan\u003eThe product will arrive with a protective film. \u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan\u003eRemoval of the protective film will void any returns, only remove once you are certain the product will fit.\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan\u003eWe cannot be held responsible for the incorrect installation or use of this product.\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan\u003ePlease compare the vehicle in the listing photos and title to your own, to ensure correct fitment. \u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan\u003eWe advise trusting installation to a qualified professional unless you are confident following the provided fitting manual.\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan\u003eThis product has been TUV MATERIALGUTACHTEN certified.\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan\u003eThe removal of the holographic verification sticker will void a return, this identifies the item as an official and authentic Maxton Design product, removal is at buyer’s risk.\u003c\/span\u003e\u003c\/p\u003e","brand":"Maxton Design","offers":[{"title":"Default Title","offer_id":47326414962984,"sku":"MXT-AU-RS3-8VF-RS2GO_O","price":174.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/5767\/7352\/files\/maxton-design-rear-valance-v-2-audi-rs3-8v-sportback-facelift-2017-up-splitters-skirts-diffusers-858.webp?v=1745141357"},{"product_id":"maxton-design-front-splitter-v-1-audi-rs3-8v-facelift-sedan-2017-20","title":"Maxton Design Front Splitter V.1 Audi RS3 8V Facelift Sedan 2017-20","description":"\u003cp\u003eFRONT SPLITTER V.1 AUDI RS3 8V FACELIFT SEDAN (2017-20)\u003c\/p\u003e\u003cp\u003e\u003cspan\u003eFits only : \u003c\/span\u003eAUDI RS3 8V FACELIFT SEDAN (2017-20)\u003c\/p\u003e\u003cp\u003e\u003cu\u003e\u003cspan\u003e\u003cbr\u003e\u003cspan\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/u\u003e\u003cu\u003e\u003cspan\u003eCOMPLETE SET CONTAINS\u003c\/span\u003e\u003cspan\u003e:\u003c\/span\u003e\u003c\/u\u003e\u003cbr\u003e\u003cspan\u003e-\u0026gt; Splitter\/Front Bumper Lip Spoiler\u003cbr\u003e-\u0026gt; Mounting Kit\u003cbr\u003e-\u0026gt; Mounting Manual\u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan\u003eFitting manual: \u003c\/span\u003e\u003ca\u003e\u003cspan\u003ehttps:\/\/www.maxtondesign.co.uk\/pdf\/splitter_fitting-manual-maxton.pdf\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan\u003e\u003c\/span\u003e\u003cspan\u003e\u003cspan\u003ePlease note, the majority of our products are made from ABS plastic, the flexibility of these products provides them the ability to withstand some pressure.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e\u003c\/span\u003e\u003cspan\u003eWe highly recommend installations are completed by a professional to ensure the product is fitted correctly and according to our fitting manuals.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e\u003c\/span\u003e\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e\u003c\/span\u003e\u003cspan\u003eIf you are unsure about the stock availability of a product(s), we would encourage you send us an email to sales@maxtondesign.co.uk and we’ll get back to you ASAP.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e\u003c\/span\u003e\u003cspan\u003eWe can only accept a return within 30 days of delivery, if the product is in its original condition including protective film still on. A refund will be processed excluding shipping costs.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e\u003c\/span\u003e\u003cspan\u003eAll products arrive with a protective film, this is a very thin plastic vacuum sealed around the product to avoid the item sustaining any damage. Once removed you will notice the product does not have any scuffs or scratches. \u003c\/span\u003e\u003c\/p\u003e","brand":"Maxton Design","offers":[{"title":"Gloss Black","offer_id":47326415028520,"sku":"MXT-AU-RS3-8VF-S-FD1G","price":174.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/5767\/7352\/files\/maxton-design-front-splitter-v-1-audi-rs3-8v-facelift-sedan-2017-20-gloss-black-splitters-skirts-diffusers-665.webp?v=1745140711"},{"product_id":"maxton-design-front-splitter-v-2-audi-rs3-8v-facelift-sedan-2017-20","title":"Maxton Design Front Splitter V.2 Audi RS3 8V Facelift Sedan 2017-20","description":"\u003cp\u003eFRONT SPLITTER V.2 AUDI RS3 8V FACELIFT SEDAN (2017-20)\u003c\/p\u003e\u003cp\u003e\u003cspan\u003eFits only: \u003c\/span\u003e AUDI RS3 8V FACELIFT SEDAN (2017-20)\u003c\/p\u003e\u003cp\u003e\u003cu\u003e\u003cspan\u003e\u003cbr\u003e\u003cspan\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/u\u003e\u003cu\u003e\u003cspan\u003eCOMPLETE SET CONTAINS\u003c\/span\u003e\u003cspan\u003e:\u003c\/span\u003e\u003c\/u\u003e\u003cbr\u003e\u003cspan\u003e-\u0026gt; Splitter\/Front Bumper Lip Spoiler\u003cbr\u003e-\u0026gt; Mounting Kit\u003cbr\u003e-\u0026gt; Mounting Manual\u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan\u003eFitting manual: \u003c\/span\u003e\u003ca\u003e\u003cspan\u003ehttps:\/\/www.maxtondesign.co.uk\/pdf\/splitter_fitting-manual-maxton.pdf\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan\u003e\u003c\/span\u003e\u003cspan\u003e\u003cspan\u003ePlease note, the majority of our products are made from ABS plastic, the flexibility of these products provides them the ability to withstand some pressure.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e\u003c\/span\u003e\u003cspan\u003eWe highly recommend installations are completed by a professional to ensure the product is fitted correctly and according to our fitting manuals.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e\u003c\/span\u003e\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e\u003c\/span\u003e\u003cspan\u003eIf you are unsure about the stock availability of a product(s), we would encourage you send us an email to sales@maxtondesign.co.uk and we’ll get back to you ASAP.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e\u003c\/span\u003e\u003cspan\u003eWe can only accept a return within 30 days of delivery, if the product is in its original condition including protective film still on. A refund will be processed excluding shipping costs.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e\u003c\/span\u003e\u003cspan\u003eAll products arrive with a protective film, this is a very thin plastic vacuum sealed around the product to avoid the item sustaining any damage. Once removed you will notice the product does not have any scuffs or scratches. \u003c\/span\u003e\u003c\/p\u003e","brand":"Maxton Design","offers":[{"title":"Gloss Black","offer_id":47326415159592,"sku":"MXT-AU-RS3-8VF-S-FD2G","price":174.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/5767\/7352\/files\/maxton-design-front-splitter-v-2-audi-rs3-8v-facelift-sedan-2017-20-gloss-black-splitters-skirts-diffusers-902.webp?v=1745143441"},{"product_id":"maxton-design-rear-diffuser-audi-rs3-8v-facelift-sedan-2017-20","title":"Maxton Design Rear Diffuser Audi RS3 8V Facelift Sedan 2017-20","description":"\u003cp\u003eREAR DIFFUSER AUDI RS3 8V FACELIFT SEDAN (2017-20)\u003c\/p\u003e\u003cp\u003e\u003cspan\u003e\u003cbr\u003e\u003cspan\u003e\u003cu\u003e\u003cspan\u003eFits Only: \u003c\/span\u003e\u003c\/u\u003e\u003c\/span\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan\u003eAUDI RS3 8V FACELIFT SEDAN (2017-20)\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan\u003eCOMPLETE SET CONTAINS:\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan\u003eRear Diffuser\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan\u003e\u003cspan\u003eYou will have to cut the original fins to fit this product.\u003c\/span\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan\u003e\u003cspan\u003eThis product is an add-on to the original diffuser. We recommend using a strong adhesive to secure fitment, such as tiger sealant.\u003c\/span\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan\u003eCHARACTERISTICS:\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan\u003eAdds aesthetic value.\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan\u003eLightweight and offers some flexibility.\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan\u003eThis product is made from ABS plastic. The same material is used widely in the automotive industry.\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan\u003eMORE INFORMATION:\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan\u003eNo additional work is required to finish the product.\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan\u003eThe product will arrive with a protective film. \u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan\u003eRemoval of the protective film will void any returns, only remove once you are certain the product will fit.\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan\u003eWe cannot be held responsible for the incorrect installation or use of this product.\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan\u003ePlease compare the vehicle in the listing photos and title to your own, to ensure correct fitment. \u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan\u003eWe advise trusting installation to a qualified professional unless you are confident following the provided fitting manual.\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan\u003eThis product has been TUV MATERIALGUTACHTEN certified.\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan\u003eThe removal of the holographic verification sticker will void a return, this identifies the item as an official and authentic Maxton Design product, removal is at buyer’s risk.\u003c\/span\u003e\u003c\/p\u003e","brand":"Maxton Design","offers":[{"title":"Gloss Black","offer_id":47326415323432,"sku":"MXT-AU-RS3-8VF-S-RS1G","price":139.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/5767\/7352\/files\/maxton-design-rear-diffuser-audi-rs3-8v-facelift-sedan-2017-20-gloss-black-splitters-skirts-diffusers-411.webp?v=1745140460"},{"product_id":"maxton-design-rear-side-splitters-audi-rs3-8v-facelift-sedan-2017-20","title":"Maxton Design Rear Side Splitters Audi RS3 8V Facelift Sedan 2017-20","description":"\u003cp\u003e\u003cspan\u003e\u003cspan\u003e\u003cspan\u003eREAR SIDE SPLITTERS AUDI RS3 8V FACELIFT SEDAN (2017-20)\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan\u003e\u003cspan\u003e\u003cu\u003eFits Only:\u003c\/u\u003e\u003c\/span\u003e\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan\u003eAUDI RS3 8V FACELIFT SEDAN (2017-20)\u003c\/span\u003e\u003cbr\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan\u003e\u003cu\u003e\u003cspan\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/u\u003e\u003c\/span\u003e\u003cspan\u003e\u003cu\u003e\u003cspan\u003e\u003cbr\u003eCOMPLETE SET CONTAINS:\u003c\/span\u003e\u003c\/u\u003e\u003c\/span\u003e\u003cspan\u003e\u003cbr\u003e-\u0026gt; Rear Side Splitters (Left \u0026amp; right)\u003cbr\u003e\u003c\/span\u003e\u003ca\u003e-\u003c\/a\u003e\u0026gt; Fitting manual \/ Fitting kit\u003c\/p\u003e\u003cp\u003e\u003ca\u003ehttps:\/\/www.maxtondesign.co.uk\/pdf\/rear-side-splitters_fitting-manual-maxton.pdf\u003c\/a\u003e\u003cbr\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan\u003e\u003cspan\u003e\u003cspan\u003e\u003cbr\u003ePlease note, the majority of our products are made from ABS plastic, the flexibility of these products provides them the ability to withstand some pressure.\u003c\/span\u003e\u003c\/span\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan\u003e\u003cspan\u003e\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e\u003c\/span\u003e\u003cspan\u003eWe highly recommend installations are completed by a professional to ensure the product is fitted correctly and according to our fitting manuals.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e\u003cspan\u003eWe can only accept a return within 30 days of delivery, if the product is in its original condition including protective film still on. A refund will be processed excluding shipping costs.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e\u003c\/span\u003e\u003c\/span\u003e\u003cspan\u003eAll products arrive with a protective film, this is a very thin plastic vacuum sealed around the product to avoid the item sustaining any damage. Once removed you will notice the product does not have any scuffs or scratches. \u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e","brand":"Maxton Design","offers":[{"title":"Gloss Black","offer_id":47326415388968,"sku":"MXT-AU-RS3-8VF-S-RSD1G","price":79.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/5767\/7352\/files\/maxton-design-rear-side-splitters-audi-rs3-8v-facelift-sedan-2017-20-gloss-black-skirts-diffusers-364.webp?v=1745137706"},{"product_id":"maxton-design-side-skirts-diffusers-audi-rs3-8v-facelift-sedan-2017-20","title":"Maxton Design Side Skirts Diffusers Audi RS3 8V Facelift Sedan 2017-20","description":"\u003cp\u003eSIDE SKIRTS DIFFUSERS AUDI RS3 8V FACELIFT SEDAN (2017-20)\u003c\/p\u003e\u003cp\u003e\u003cu\u003e\u003cspan\u003e\u003cspan\u003eFits Only:\u003c\/span\u003e\u003c\/span\u003e\u003c\/u\u003e\u003cspan\u003e \u003cbr\u003e\u003cspan\u003eAUDI RS3 8V FACELIFT SEDAN (2017-20)\u003c\/span\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan\u003e\u003cu\u003e\u003cspan\u003e\u003cspan\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/u\u003e\u003c\/span\u003e\u003cspan\u003e\u003cu\u003eCOMPLETE SET CONTAINS:\u003c\/u\u003e\u003c\/span\u003e\u003cbr\u003e-\u0026gt; Side Skirt Splitters\u003cbr\u003e-\u0026gt; Mounting Kit\u003cbr\u003e-\u0026gt; Mounting Manual\u003cbr\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan\u003eFitting manual: \u003c\/span\u003e\u003ca\u003ehttps:\/\/www.maxtondesign.co.uk\/pdf\/side-skirts-diffusers_fitting-manual-maxton.pdf\u003c\/a\u003e\u003ca\u003e\u003cbr\u003e\u003c\/a\u003e\u003cspan\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan\u003e\u003c\/span\u003e\u003cspan\u003e\u003cspan\u003ePlease note, the majority of our products are made from ABS plastic, the flexibility of these products provides them the ability to withstand some pressure.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e\u003c\/span\u003e\u003cspan\u003e\u003cspan\u003eWe highly recommend installations are completed by a professional to ensure the product is fitted correctly and according to our fitting manuals.\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003eWe can only accept a return within 30 days of delivery, if the product is in its original condition including protective film still on. A refund will be processed excluding shipping costs.\u003cbr\u003e\u003cspan\u003e\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eAll products arrive with a protective film, this is a very thin plastic vacuum sealed around the product to avoid the item sustaining any damage. Once removed you will notice the product does not have any scuffs or scratches. \u003c\/span\u003e\u003c\/p\u003e","brand":"Maxton Design","offers":[{"title":"Gloss Black","offer_id":47326415454504,"sku":"MXT-AU-RS3-8VF-S-SD1G","price":174.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/5767\/7352\/files\/maxton-design-side-skirts-diffusers-audi-rs3-8v-facelift-sedan-2017-20-gloss-black-splitters-721.webp?v=1745136184"},{"product_id":"maxton-design-front-splitter-v-1-audi-rs3-8v-facelift-sportback-2017-20","title":"Maxton Design Front Splitter V.1 Audi RS3 8V Facelift Sportback 2017 - 20","description":"\u003cp\u003eFRONT SPLITTER V.1 AUDI RS3 8V FACELIFT SPORTBACK (2017 - 20)\u003c\/p\u003e\u003cp\u003e\u003cspan\u003eFits only : \u003c\/span\u003eAUDI RS3 8V FACELIFT SPORTBACK (2017 -20)\u003cspan\u003e \u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cu\u003e\u003cspan\u003e\u003cbr\u003e\u003cspan\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/u\u003e\u003cu\u003e\u003cspan\u003eCOMPLETE SET CONTAINS\u003c\/span\u003e\u003cspan\u003e:\u003c\/span\u003e\u003c\/u\u003e\u003cbr\u003e\u003cspan\u003e-\u0026gt; Splitter\/Front Bumper Lip Spoiler\u003cbr\u003e-\u0026gt; Mounting Kit\u003cbr\u003e-\u0026gt; Mounting Manual\u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan\u003eFitting manual: \u003c\/span\u003e\u003ca\u003e\u003cspan\u003ehttps:\/\/www.maxtondesign.co.uk\/pdf\/splitter_fitting-manual-maxton.pdf\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan\u003e\u003c\/span\u003e\u003cspan\u003e\u003cspan\u003ePlease note, the majority of our products are made from ABS plastic, the flexibility of these products provides them the ability to withstand some pressure.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e\u003c\/span\u003e\u003cspan\u003eWe highly recommend installations are completed by a professional to ensure the product is fitted correctly and according to our fitting manuals.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e\u003c\/span\u003e\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e\u003c\/span\u003e\u003cspan\u003eIf you are unsure about the stock availability of a product(s), we would encourage you send us an email to sales@maxtondesign.co.uk and we’ll get back to you ASAP.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e\u003c\/span\u003e\u003cspan\u003eWe can only accept a return within 30 days of delivery, if the product is in its original condition including protective film still on. A refund will be processed excluding shipping costs.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e\u003c\/span\u003e\u003cspan\u003eAll products arrive with a protective film, this is a very thin plastic vacuum sealed around the product to avoid the item sustaining any damage. Once removed you will notice the product does not have any scuffs or scratches. \u003c\/span\u003e\u003c\/p\u003e","brand":"Maxton Design","offers":[{"title":"Gloss Black","offer_id":47326415552808,"sku":"MXT-AU-RS3-8VF-FD1G","price":174.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/5767\/7352\/files\/maxton-design-front-splitter-v-1-audi-rs3-8v-facelift-sportback-2017-20-gloss-black-splitters-skirts-diffusers-109.webp?v=1745140651"},{"product_id":"maxton-design-front-splitter-v-2-audi-rs3-8v-facelift-sportback-17-20","title":"Maxton Design Front Splitter V.2 Audi RS3 8V Facelift Sportback 17-20","description":"\u003cp\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan\u003eFRONT SPLITTER V.2\u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\u003cspan\u003e AUDI RS3 8V FACELIFT SPORTBACK\u003c\/span\u003e\u003cspan\u003e\u003cbr\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan\u003e\u003cspan\u003e\u003cbr\u003e\u003c\/span\u003e\u003cu\u003e\u003cspan\u003ef\u003cspan\u003eits only:\u003c\/span\u003e\u003c\/span\u003e\u003c\/u\u003e\u003c\/span\u003e\u003cspan\u003e AUDI RS3 8V FACELIFT SPORTBACK (2017-2020)\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cu\u003e\u003cspan\u003e\u003cbr\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/span\u003e\u003c\/u\u003e\u003cu\u003e\u003cspan\u003eCOMPLETE SET CONTAINS:\u003c\/span\u003e\u003c\/u\u003e\u003cspan\u003e\u003cbr\u003e\u003cspan\u003e -\u0026gt; Splitter\/Front Bumper Lip Spoiler\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e -\u0026gt; Mounting Kit\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e -\u0026gt; Mounting Manual\u003c\/span\u003e\u003c\/span\u003e\u003cspan\u003e\u003cbr\u003e\u003cspan\u003e \u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan\u003eFitting manuals: \u003c\/span\u003e\u003ca\u003e\u003cspan\u003ehttps:\/\/www.maxtondesign.co.uk\/pdf\/splitter_fitting-manual-maxton.pdf\u003c\/span\u003e\u003c\/a\u003e\u003ca\u003e\u003cbr\u003e\u003c\/a\u003e\u003cspan\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan\u003e\u003cspan\u003ePlease note, the majority of our products are made from ABS plastic, the flexibility of these products provides them the ability to withstand some pressure.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e \u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e \u003c\/span\u003e\u003cspan\u003eWe highly recommend installations are completed by a professional to ensure the product is fitted correctly and according to our fitting manuals.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e \u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e \u003c\/span\u003e\u003cspan\u003eIf you are unsure about the stock availability of a product(s), we would encourage you send us an email to sales@maxtondesign.co.uk and we’ll get back to you ASAP.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e \u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e \u003c\/span\u003e\u003cspan\u003eWe can only accept a return within 30 days of delivery, if the product is in its original condition including protective film still on. A refund will be processed excluding shipping costs.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e \u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e \u003c\/span\u003e\u003cspan\u003eAll products arrive with a protective film, this is a very thin plastic vacuum sealed around the product to avoid the item sustaining any damage. Once removed you will notice the product does not have any scuffs or scratches. \u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e","brand":"Maxton Design","offers":[{"title":"Gloss Black","offer_id":47326415651112,"sku":"MXT-AU-RS3-8VF-FD2G","price":174.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/5767\/7352\/files\/maxton-design-front-splitter-v-2-audi-rs3-8v-facelift-sportback-17-20-gloss-black-splitters-skirts-diffusers-132.webp?v=1745143503"},{"product_id":"maxton-design-side-skirts-diffusers-audi-rs3-8v-facelift-sportback-17-20","title":"Maxton Design Side Skirts Diffusers Audi RS3 8V Facelift Sportback 17-20","description":"\u003cp\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan\u003eSIDE SKIRTS DIFFUSERS AUDI RS3 8V FACELIFT SPORTBACK\u003cbr\u003e\u003c\/span\u003e\u003cspan\u003e\u003cspan\u003e\u003cbr\u003e\u003cspan\u003e \u003c\/span\u003e\u003cu\u003e\u003cspan\u003efits only:\u003c\/span\u003e\u003c\/u\u003e\u003c\/span\u003e\u003c\/span\u003e\u003cspan\u003e\u003cspan\u003e AUDI RS3 8V FACELIFT SPORTBACK (2017-2020)\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cu\u003e\u003cspan\u003e\u003cbr\u003e\u003cspan\u003e \u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/u\u003e\u003cu\u003e\u003cspan\u003eCOMPLETE SET CONTAINS\u003c\/span\u003e\u003cspan\u003e:\u003c\/span\u003e\u003c\/u\u003e\u003cspan\u003e\u003cbr\u003e\u003cspan\u003e -\u0026gt; Side Skirt Diffusers\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e-\u0026gt; Mounting Kit\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e-\u0026gt; Mounting Manual\u003c\/span\u003e\u003c\/span\u003e\u003cspan\u003e\u003cspan\u003e\u003cbr\u003e\u003cspan\u003e \u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan\u003e\u003cspan\u003eFitting manuals: \u003c\/span\u003e\u003c\/span\u003e\u003ca\u003e\u003cspan\u003ehttps:\/\/www.maxtondesign.co.uk\/pdf\/side-skirts-diffusers_fitting-manual-maxton.pdf\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan\u003e\u003cspan\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/span\u003e\u003cspan\u003e\u003cspan\u003ePlease note, the majority of our products are made from ABS plastic, the flexibility of these products provides them the ability to withstand some pressure.\u003c\/span\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan\u003e\u003cspan\u003e \u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e \u003c\/span\u003e\u003cspan\u003eWe highly recommend installations are completed by a professional to ensure the product is fitted correctly and according to our fitting manuals.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e \u003c\/span\u003e\u003cspan\u003eIf you are unsure about the stock availability of a product(s), we would encourage you send us an email to sales@maxtondesign.co.uk and we’ll get back to you ASAP.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e \u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e \u003c\/span\u003e\u003cspan\u003eWe can only accept a return within 30 days of delivery, if the product is in its original condition including protective film still on. A refund will be processed excluding shipping costs.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e \u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e \u003c\/span\u003e\u003cspan\u003eAll products arrive with a protective film, this is a very thin plastic vacuum sealed around the product to avoid the item sustaining any damage. Once removed you will notice the product does not have any scuffs or scratches. \u003c\/span\u003e\u003c\/p\u003e","brand":"Maxton Design","offers":[{"title":"Gloss Black","offer_id":47326415749416,"sku":"MXT-AU-RS3-8VF-SD1G","price":174.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/5767\/7352\/files\/maxton-design-side-skirts-diffusers-audi-rs3-8v-facelift-sportback-17-20-gloss-black-splitters-489.webp?v=1745141042"},{"product_id":"maxton-design-racing-side-skirts-diffusers-v-1-audi-rs3-8v-facelift-sportback-2017-20","title":"Maxton Design Racing Side Skirts Diffusers V.1 Audi RS3 8V Facelift Sportback 2017-20","description":"\u003cp\u003eRACING SIDE SKIRTS DIFFUSERS V.1 AUDI RS3 8V FACELIFT SPORTBACK\u003c\/p\u003e\u003cp\u003e\u003cspan\u003efits only: \u003c\/span\u003eAUDI RS3 8V FACELIFT SPORTBACK (2017-20)\u003c\/p\u003e\u003cp\u003e\u003cspan\u003eCOMPLETE SET CONTAINS:\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan\u003eSIDE SKIRTS DIFFUSERS\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan\u003e\u003cspan\u003eMounting kit\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan\u003eProduct is made of ABS plastic.\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cbr\u003e\u003cspan\u003eABS material was created specifically for use in the automotive industry.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eABS is used in production of factory bumpers and other car body parts.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eABS products are characterized with increased strength and flexibility.\u003c\/span\u003e\u003c\/p\u003e","brand":"Maxton Design","offers":[{"title":"Default Title","offer_id":47326415814952,"sku":"MXT-AU-RS3-8VF-CNC-SD1A","price":159.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/5767\/7352\/files\/maxton-design-racing-side-skirts-diffusers-v-1-audi-rs3-8v-facelift-sportback-2017-20-splitters-490.webp?v=1745139172"},{"product_id":"maxton-design-racing-side-skirts-diffusers-v-2-audi-rs3-8v-facelift-sportback-2017-20","title":"Maxton Design Racing Side Skirts Diffusers V.2 Audi RS3 8V Facelift Sportback 2017-20","description":"\u003cp\u003eRACING SIDE SKIRTS DIFFUSERS V.2 AUDI RS3 8V FACELIFT SPORTBACK\u003c\/p\u003e\u003cp\u003e\u003cspan\u003efits only:  \u003c\/span\u003eAUDI RS3 8V FACELIFT SPORTBACK (2017 - 20)\u003c\/p\u003e\u003cp\u003e\u003cspan\u003eCOMPLETE SET CONTAINS:\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan\u003eSIDE SKIRTS DIFFUSERS\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan\u003e\u003cspan\u003eMounting kit\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan\u003eProduct is made of ABS plastic.\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cbr\u003e\u003cspan\u003eABS material was created specifically for use in the automotive industry.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eABS is used in production of factory bumpers and other car body parts.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eABS products are characterized with increased strength and flexibility.\u003c\/span\u003e\u003c\/p\u003e","brand":"Maxton Design","offers":[{"title":"Default Title","offer_id":47326415847720,"sku":"MXT-AU-RS3-8VF-CNC-SD2A","price":159.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/5767\/7352\/files\/maxton-design-racing-side-skirts-diffusers-v-2-audi-rs3-8v-facelift-sportback-2017-20-splitters-648.webp?v=1745136240"},{"product_id":"maxton-design-front-racing-splitter-v-1-audi-rs3-8v-facelift-sportback-2017-20","title":"Maxton Design Front Racing Splitter V.1 Audi RS3 8V Facelift Sportback 2017-20","description":"\u003cp\u003eFRONT RACING SPLITTER V.1 AUDI RS3 8V FACELIFT SPORTBACK (2017-20)\u003c\/p\u003e\u003cp\u003e\u003cu\u003e\u003cspan\u003eFits Only:\u003c\/span\u003e\u003c\/u\u003e  \u003cbr\u003e\u003cspan\u003eRS3 8V FACELIFT SPORTBACK (2017-20)\u003c\/span\u003e\u003cbr\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan\u003e\u003cu\u003e\u003cspan\u003e\u003cbr\u003e\u003cspan\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/u\u003e\u003c\/span\u003e\u003cspan\u003e\u003cu\u003eCOMPLETE SET CONTAINS:\u003c\/u\u003e\u003c\/span\u003e\u003cbr\u003e-\u0026gt; Splitter\/Front Bumper Lip Spoiler\u003cbr\u003e-\u0026gt; Mounting Kit\u003cbr\u003e-\u0026gt; Mounting Manual\u003cbr\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan\u003eFitting manual:  \u003c\/span\u003e\u003ca\u003ehttps:\/\/www.maxtondesign.co.uk\/pdf\/splitter_fitting-manual-maxton.pdf\u003c\/a\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan\u003e\u003c\/span\u003e\u003cspan\u003e\u003cspan\u003ePlease note, the majority of our products are made from ABS plastic, the flexibility and thickness of our racing products allows for added durability.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e\u003c\/span\u003e\u003cspan\u003e\u003cspan\u003eWe highly recommend installations are completed by a professional to ensure the product is fitted correctly and according to our fitting manuals.\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003eWe can only accept a return within 30 days of delivery, if the product is in its original condition including protective film still on. A refund will be processed excluding shipping costs.\u003cbr\u003e\u003cspan\u003e\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eAll products arrive with a protective film, this is a very thin plastic vacuum sealed around the product to avoid the item sustaining any damage. Once removed you will notice the product does not have any scuffs or scratches.  \u003c\/span\u003e\u003c\/p\u003e","brand":"Maxton Design","offers":[{"title":"Default Title","offer_id":47326415880488,"sku":"MXT-AU-RS3-8VF-CNC-FD1A","price":159.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/5767\/7352\/files\/maxton-design-front-racing-splitter-v-1-audi-rs3-8v-facelift-sportback-2017-20-splitters-skirts-diffusers-945.webp?v=1745140846"},{"product_id":"maxton-design-front-racing-splitter-v-2-audi-rs3-8v-facelift-sportback-2017-20","title":"Maxton Design Front Racing Splitter V.2 Audi RS3 8V Facelift Sportback 2017-20","description":"\u003cp\u003eFRONT RACING SPLITTER V.2 AUDI RS3 8V FACELIFT SPORTBACK (2017-20)\u003c\/p\u003e\u003cp\u003e\u003cspan\u003eFits only: \u003c\/span\u003eAUDI RS3 8V FACELIFT SPORTBACK (2017-20)\u003c\/p\u003e\u003cp\u003e\u003cu\u003e\u003cspan\u003e\u003cbr\u003e\u003cspan\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/u\u003e\u003cu\u003e\u003cspan\u003eCOMPLETE SET CONTAINS\u003c\/span\u003e\u003cspan\u003e:\u003c\/span\u003e\u003c\/u\u003e\u003cbr\u003e\u003cspan\u003e-\u0026gt; Splitter\/Front Bumper Lip Spoiler\u003cbr\u003e-\u0026gt; Mounting Kit\u003cbr\u003e-\u0026gt; Mounting Manual\u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan\u003eFitting manual: \u003c\/span\u003e\u003ca\u003e\u003cspan\u003ehttps:\/\/www.maxtondesign.co.uk\/pdf\/splitter_fitting-manual-maxton.pdf\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan\u003e\u003c\/span\u003e\u003cspan\u003e\u003cspan\u003ePlease note, the majority of our products are made from ABS plastic, the flexibility of these products provides them the ability to withstand some pressure.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e\u003c\/span\u003e\u003cspan\u003eWe highly recommend installations are completed by a professional to ensure the product is fitted correctly and according to our fitting manuals.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e\u003c\/span\u003e\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e\u003c\/span\u003e\u003cspan\u003eIf you are unsure about the stock availability of a product(s), we would encourage you send us an email to sales@maxtondesign.co.uk and we’ll get back to you ASAP.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e\u003c\/span\u003e\u003cspan\u003eWe can only accept a return within 30 days of delivery, if the product is in its original condition including protective film still on. A refund will be processed excluding shipping costs.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e\u003c\/span\u003e\u003cspan\u003eAll products arrive with a protective film, this is a very thin plastic vacuum sealed around the product to avoid the item sustaining any damage. Once removed you will notice the product does not have any scuffs or scratches. \u003c\/span\u003e\u003c\/p\u003e","brand":"Maxton Design","offers":[{"title":"Default Title","offer_id":47326415913256,"sku":"MXT-AU-RS3-8VF-CNC-FD2A","price":159.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/5767\/7352\/files\/maxton-design-front-racing-splitter-v-2-audi-rs3-8v-facelift-sportback-2017-20-splitters-skirts-diffusers-212.webp?v=1745142006"},{"product_id":"maxton-design-rear-diffuser-v-1-audi-rs3-8v-facelift-sportback-2017-20","title":"Maxton Design Rear Diffuser V.1 Audi RS3 8V Facelift Sportback 2017-20","description":"     \u003cp\u003e\u003cstrong\u003eREAR DIFFUSER V.1 AUDI RS3 8V FACELIFT SPORTBACK (2017-20)\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003e\u003cspan\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eFITS ONLY:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e\u003c\/span\u003eRS3 8V FACELIFT SPORTBACK (2017-20)\u003cspan\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e \u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eCOMPLETE SET CONTAINS:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e \u003cp\u003e\u003cspan\u003eREAR DIFFUSER\u003c\/span\u003e\u003c\/p\u003e \u003cp\u003e\u003cspan\u003eMounting kit\u003c\/span\u003e\u003c\/p\u003e \u003cp\u003e\u003cspan\u003eProduct is made of ABS plastic.\u003cbr\u003e\u003c\/span\u003e\u003cspan\u003eABS material was created specifically for use in the automotive industry.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eABS is used in production of factory bumpers and other car body parts.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eABS products are characterized with increased strength and flexibility.\u003c\/span\u003e\u003c\/p\u003e \u003cp\u003e\u003cspan\u003e\u003cspan\u003eThis product has been TUV MATERIALGUTACHTEN certified (TUV certify for material).\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e  ","brand":"Maxton Design","offers":[{"title":"Default Title","offer_id":47326415946024,"sku":"MXT-AU-RS3-8VF-CNC-RS1A","price":159.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/5767\/7352\/files\/maxton-design-rear-diffuser-v-1-audi-rs3-8v-facelift-sportback-2017-20-splitters-skirts-diffusers-629.webp?v=1745140732"},{"product_id":"maxton-design-rear-valance-audi-rs3-8v-fl-sportback-2017-20","title":"Maxton Design Rear Valance Audi RS3 8V FL Sportback 2017-20","description":"\u003cp\u003eREAR VALANCE AUDI RS3 8V FL SPORTBACK (2017-20)\u003c\/p\u003e\u003cp\u003e\u003cspan\u003e\u003cbr\u003e\u003cspan\u003e\u003cu\u003e\u003cspan\u003eFits Only:  \u003c\/span\u003e\u003c\/u\u003e\u003c\/span\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan\u003eAUDI RS3 8V FL SPORTBACK (2017-20)\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan\u003eCOMPLETE SET CONTAINS:\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan\u003eRear Diffuser\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan\u003e\u003cspan\u003eYou will have to cut the original fins to fit this product.\u003c\/span\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan\u003e\u003cspan\u003eThis product is an add-on to the original diffuser. We recommend using a strong adhesive to secure fitment, such as tiger sealant.\u003c\/span\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan\u003eCHARACTERISTICS:\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan\u003eAdds aesthetic value.\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan\u003eLightweight and offers some flexibility.\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan\u003eThis product is made from ABS plastic. The same material is used widely in the automotive industry.\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan\u003eMORE INFORMATION:\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan\u003eNo additional work is required to finish the product.\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan\u003eThe product will arrive with a protective film.  \u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan\u003eRemoval of the protective film will void any returns, only remove once you are certain the product will fit.\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan\u003eWe cannot be held responsible for the incorrect installation or use of this product.\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan\u003ePlease compare the vehicle in the listing photos and title to your own, to ensure correct fitment.  \u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan\u003eWe advise trusting installation to a qualified professional unless you are confident following the provided fitting manual.\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan\u003eThis product has been TUV MATERIALGUTACHTEN certified.\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan\u003eThe removal of the holographic verification sticker will void a return, this identifies the item as an official and authentic Maxton Design product, removal is at buyer’s risk.\u003c\/span\u003e\u003c\/p\u003e","brand":"Maxton Design","offers":[{"title":"Gloss Black","offer_id":47326416077096,"sku":"MXT-AU-RS3-8VF-RS1G","price":139.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/5767\/7352\/files\/maxton-design-rear-valance-audi-rs3-8v-fl-sportback-2017-20-gloss-black-splitters-skirts-diffusers-274.webp?v=1745137862"},{"product_id":"maxton-design-rear-side-splitters-audi-rs3-8v-facelift-sportback-17-20","title":"Maxton Design Rear Side Splitters Audi RS3 8V Facelift Sportback 17-20","description":"\u003cp\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan\u003eREAR SIDE SPLITTERS AUDI RS3 8V FL SPORTBACK\u003cbr\u003e\u003c\/span\u003e\u003cspan\u003e\u003cspan\u003e\u003cbr\u003e\u003cspan\u003e \u003c\/span\u003e\u003cu\u003e\u003cspan\u003efits only:\u003c\/span\u003e\u003c\/u\u003e\u003c\/span\u003e\u003c\/span\u003e\u003cspan\u003e\u003cspan\u003e AUDI RS3 8V FACELIFT SPORTBACK (2017-2020)\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cu\u003e\u003cspan\u003e\u003cbr\u003e\u003cspan\u003e \u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/u\u003e\u003cu\u003e\u003cspan\u003eCOMPLETE SET CONTAINS\u003c\/span\u003e\u003cspan\u003e:\u003c\/span\u003e\u003c\/u\u003e\u003cspan\u003e\u003cbr\u003e\u003cspan\u003e -\u0026gt; Splitters(Left+Right)\u003c\/span\u003e\u003c\/span\u003e\u003cspan\u003e\u003cspan\u003e\u003cbr\u003e\u003cspan\u003e \u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan\u003e\u003cspan\u003eFitting manuals: \u003c\/span\u003e\u003c\/span\u003e\u003ca\u003e\u003cspan\u003ehttps:\/\/www.maxtondesign.co.uk\/pdf\/rear-side-splitters_fitting-manual-maxton.pdf\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan\u003e\u003cspan\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/span\u003e\u003cspan\u003e\u003cspan\u003ePlease note, the majority of our products are made from ABS plastic, the flexibility of these products provides them the ability to withstand some pressure.\u003c\/span\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan\u003e\u003cspan\u003e \u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e \u003c\/span\u003e\u003cspan\u003eWe highly recommend installations are completed by a professional to ensure the product is fitted correctly and according to our fitting manuals.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e \u003c\/span\u003e\u003cspan\u003eIf you are unsure about the stock availability of a product(s), we would encourage you send us an email to sales@maxtondesign.co.uk and we’ll get back to you ASAP.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e \u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e \u003c\/span\u003e\u003cspan\u003eWe can only accept a return within 30 days of delivery, if the product is in its original condition including protective film still on. A refund will be processed excluding shipping costs.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e \u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e \u003c\/span\u003e\u003cspan\u003eAll products arrive with a protective film, this is a very thin plastic vacuum sealed around the product to avoid the item sustaining any damage. Once removed you will notice the product does not have any scuffs or scratches.  \u003c\/span\u003e\u003c\/p\u003e","brand":"Maxton Design","offers":[{"title":"Gloss Black","offer_id":47326416175400,"sku":"MXT-AU-RS3-8VF-RSD1G","price":79.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/5767\/7352\/files\/maxton-design-rear-side-splitters-audi-rs3-8v-facelift-sportback-17-20-gloss-black-skirts-diffusers-130.webp?v=1745140190"},{"product_id":"maxton-design-spoiler-cap-v2-audi-rs3-8v-8v-facelift-sportback-17-20","title":"Maxton Design Spoiler CAP V2 Audi RS3 8V 8V Facelift Sportback 17-20","description":"\u003cp\u003e\u003cspan\u003e\u003cspan\u003eSPOILER CAP V2 AUDI RS3 8V\/ 8V FACELIFT SPORTBACK\u003c\/span\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan\u003e\u003cspan\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e \u003cp\u003e\u003cspan\u003e\u003cspan\u003e\u003cbr\u003e\u003cu\u003e\u003cspan\u003eFits only:\u003c\/span\u003e\u003c\/u\u003e\u003c\/span\u003e\u003c\/span\u003e\u003cspan\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e \u003cp\u003e\u003cspan\u003e\u003cspan\u003eAUDI RS3 8V\/ 8V FACELIFT SPORTBACK (2015-2020)\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e \u003cp\u003e\u003cu\u003e\u003cspan\u003ePlease Note:\u003c\/span\u003e\u003c\/u\u003e\u003c\/p\u003e \u003cp\u003e\u003cspan\u003e  \u003c\/span\u003e** The removal of the holographic verification sticker  will  void a return, this identifies the item as an official and authentic Maxton Design product, removal is at buyer's risk. **\u003c\/p\u003e \u003cp\u003e\u003cu\u003e\u003cspan\u003eCOMPLETE SET CONTAINS:\u003c\/span\u003e\u003c\/u\u003e\u003cbr\u003e\u003cspan\u003e-\u0026gt; Spoiler Extension with 3M Tape\u003cbr\u003e-\u0026gt; Degreasing Cloth\u003c\/span\u003e\u003c\/p\u003e \u003cp\u003e\u003cspan\u003eFitting manuals:  \u003c\/span\u003e\u003ca\u003ehttps:\/\/www.maxtondesign.co.uk\/pdf\/cap-spoiler_fitting-manual-maxton.pdf\u003c\/a\u003e\u003c\/p\u003e \u003cp\u003e\u003cspan\u003e\u003cspan\u003ePlease note, the majority of our products are made from ABS plastic, the flexibility of these products provides them the ability to withstand some pressure.\u003c\/span\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e \u003cp\u003e\u003cspan\u003e\u003cspan\u003e\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e\u003c\/span\u003e\u003cspan\u003eWe highly recommend installations are completed by a professional to ensure the product is fitted correctly and according to our fitting manuals.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003e\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e\u003c\/span\u003e\u003cspan\u003eWe can only accept a return within 30 days of delivery, if the product is in its original condition including protective film still on. A refund will be processed excluding shipping costs.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e\u003c\/span\u003e\u003cspan\u003eAll products arrive with a protective film, this is a very thin plastic vacuum sealed around the product to avoid the item sustaining any damage. Once removed you will notice the product does not have any scuffs or scratches.\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e","brand":"Maxton Design","offers":[{"title":"Gloss Black","offer_id":47326416273704,"sku":"MXT-AU-RS3-8V-CAP2G","price":129.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/5767\/7352\/files\/maxton-design-spoiler-cap-v2-audi-rs3-8v-facelift-sportback-17-20-gloss-black-spoilers-624.webp?v=1745143596"},{"product_id":"maxton-design-spoiler-cap-v3-audi-rs3-8v-8v-facelift-sportback-01-20","title":"Maxton Design Spoiler CAP V3 Audi RS3 8V 8V Facelift Sportback 01-20","description":"\u003cp\u003e\u003cspan\u003eSPOILER CAP V3 AUDI RS3 8V\/ 8V FACELIFT SPORTBACK (2015-2020)\u003c\/span\u003e\u003c\/p\u003e \u003cp\u003e\u003cspan\u003e\u003cbr\u003e\u003c\/span\u003e\u003cu\u003e\u003cspan\u003eFits only:\u003c\/span\u003e\u003c\/u\u003e\u003cspan\u003e  \u003c\/span\u003e\u003c\/p\u003e \u003cp\u003e\u003cspan\u003eAUDI RS3 8V\/ 8V FACELIFT SPORTBACK (2015-2020)\u003c\/span\u003e\u003c\/p\u003e \u003cp\u003e\u003cu\u003e\u003cspan\u003ePlease Note:\u003c\/span\u003e\u003c\/u\u003e\u003cspan\u003e\u003c\/span\u003e\u003c\/p\u003e \u003cp\u003e\u003cspan\u003e  \u003c\/span\u003e\u003cspan\u003e** The removal of the holographic verification sticker  will  void a return, this identifies the item as an official and authentic Maxton Design product, removal is at buyer’s risk. **\u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\u003c\/p\u003e \u003cp\u003e\u003cu\u003e\u003cspan\u003eCOMPLETE SET CONTAINS:\u003c\/span\u003e\u003c\/u\u003e\u003cspan\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan\u003e-\u0026gt; Spoiler Extension with 3M Tape\u003cbr\u003e-\u0026gt; Degreasing Cloth\u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\u003c\/p\u003e \u003cp\u003e\u003cspan\u003eFitting manuals:  \u003c\/span\u003e\u003cu\u003e\u003cspan\u003e\u003ca\u003ehttps:\/\/www.maxtondesign.co.uk\/pdf\/cap-spoiler_fitting-manual-maxton.pdf\u003c\/a\u003e\u003c\/span\u003e\u003c\/u\u003e\u003cspan\u003e\u003c\/span\u003e\u003c\/p\u003e \u003cp\u003e\u003cspan\u003ePlease note, the majority of our products are made from ABS plastic, the flexibility of these products provides them the ability to withstand some pressure.\u003c\/span\u003e\u003cspan\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e \u003cp\u003e\u003cspan\u003eWe highly recommend installations are completed by a professional to ensure the product is fitted correctly and according to our fitting manuals.\u003c\/span\u003e\u003cspan\u003eWe can only accept a return within 30 days of delivery, if the product is in its original condition including protective film still on. A refund will be processed excluding shipping costs.\u003c\/span\u003e\u003cspan\u003eAll products arrive with a protective film, this is a very thin plastic vacuum sealed around the product to avoid the item sustaining any damage. Once removed you will notice the product does not have any scuffs or scratches.\u003c\/span\u003e\u003c\/p\u003e","brand":"Maxton Design","offers":[{"title":"Gloss Black","offer_id":47326416339240,"sku":"MXT-AU-RS3-8V-CAP3G","price":129.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/5767\/7352\/files\/maxton-design-spoiler-cap-v3-audi-rs3-8v-facelift-sportback-01-20-gloss-black-spoilers-712.webp?v=1745140960"},{"product_id":"maxton-design-rear-side-diffusers-v1-audi-rs3-8v-sportback-15-16","title":"Maxton Design Rear Side Diffusers V1 Audi RS3 8V Sportback 15-16","description":"\u003cspan\u003eREAR SIDE DIFFUSERS V1 AUDI RS3 8V SPORTBACK \u003cspan\u003e\u003cp\u003e\u003cu\u003e\u003cspan\u003eFITS ONLY:\u003c\/span\u003e\u003cbr\u003e\u003c\/u\u003eAudi RS3 8V Sportback (2015-2016)\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ci\u003e\u003c\/i\u003e\u003cu\u003e\u003c\/u\u003e\u003cu\u003e\u003c\/u\u003e\u003cbr\u003e\u003c\/p\u003e\u003c\/span\u003e\u003cp\u003e\u003cu\u003e\u003cspan\u003e\u003cbr\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/span\u003e\u003c\/u\u003e\u003cu\u003e\u003cspan\u003eCOMPLETE SET CONTAINS:\u003c\/span\u003e\u003c\/u\u003e\u003cspan\u003e\u003cbr\u003e\u003cspan\u003e -\u0026gt; Diffusers(Left+Right)\u003c\/span\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan\u003e\u003cbr\u003e\u003cspan\u003e \u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eFitting manuals: \u003c\/span\u003e\u003ca\u003ehttps:\/\/www.maxtondesign.co.uk\/pdf\/rear-side-splitters_fitting-manual-maxton.pdf\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cspan\u003ePlease note, the majority of our products are made from ABS plastic, the flexibility of these products provides them the ability to withstand some pressure.\u003c\/span\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cspan\u003e \u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e \u003c\/span\u003e\u003cspan\u003eWe highly recommend installations are completed by a professional to ensure the product is fitted correctly and according to our fitting manuals.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e \u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e \u003c\/span\u003e\u003cspan\u003eIf you are unsure about the stock availability of a product(s), we would encourage you send us an email to sales@maxtondesign.co.uk and we’ll get back to you ASAP.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e \u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e \u003c\/span\u003e\u003cspan\u003eWe can only accept a return within 30 days of delivery, if the product is in its original condition including protective film still on. A refund will be processed excluding shipping costs.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e \u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e \u003c\/span\u003e\u003cspan\u003eAll products arrive with a protective film, this is a very thin plastic vacuum sealed around the product to avoid the item sustaining any damage. Once removed you will notice the product does not have any scuffs or scratches. \u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\u003c\/span\u003e","brand":"Maxton Design","offers":[{"title":"Gloss Black","offer_id":47326416437544,"sku":"MXT-AU-RS3-8V-RSD1G","price":79.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/5767\/7352\/files\/maxton-design-rear-side-diffusers-v1-audi-rs3-8v-sportback-15-16-gloss-black-splitters-skirts-233.webp?v=1745140115"},{"product_id":"maxton-design-rear-side-diffusers-v2-audi-rs3-8v-sportback-15-16","title":"Maxton Design Rear Side Diffusers V2 Audi RS3 8V Sportback 15-16","description":"\u003cspan\u003eREAR SIDE DIFFUSERS V2 AUDI RS3 8V SPORTBACK  \u003cspan\u003e\u003cp\u003e\u003cu\u003e\u003cspan\u003eFITS ONLY:\u003c\/span\u003e\u003cbr\u003e\u003c\/u\u003eAudi RS3 8V Sportback (2015-2016)\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ci\u003e\u003c\/i\u003e\u003cu\u003e\u003c\/u\u003e\u003cu\u003e\u003c\/u\u003e\u003cbr\u003e\u003c\/p\u003e\u003c\/span\u003e\u003cp\u003e\u003cu\u003e\u003cspan\u003e\u003cbr\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/span\u003e\u003c\/u\u003e\u003cu\u003e\u003cspan\u003eCOMPLETE SET CONTAINS:\u003c\/span\u003e\u003c\/u\u003e\u003cspan\u003e\u003cbr\u003e\u003cspan\u003e -\u0026gt; Diffusers(Left+Right)\u003c\/span\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan\u003e\u003cbr\u003e\u003cspan\u003e \u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eFitting manuals:  \u003c\/span\u003e\u003ca\u003ehttps:\/\/www.maxtondesign.co.uk\/pdf\/rear-side-splitters_fitting-manual-maxton.pdf\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cspan\u003ePlease note, the majority of our products are made from ABS plastic, the flexibility of these products provides them the ability to withstand some pressure.\u003c\/span\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cspan\u003e \u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e \u003c\/span\u003e\u003cspan\u003eWe highly recommend installations are completed by a professional to ensure the product is fitted correctly and according to our fitting manuals.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e \u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e \u003c\/span\u003e\u003cspan\u003eIf you are unsure about the stock availability of a product(s), we would encourage you send us an email to sales@maxtondesign.co.uk and we’ll get back to you ASAP.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e \u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e \u003c\/span\u003e\u003cspan\u003eWe can only accept a return within 30 days of delivery, if the product is in its original condition including protective film still on. A refund will be processed excluding shipping costs.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e \u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e \u003c\/span\u003e\u003cspan\u003eAll products arrive with a protective film, this is a very thin plastic vacuum sealed around the product to avoid the item sustaining any damage. Once removed you will notice the product does not have any scuffs or scratches.  \u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\u003c\/span\u003e","brand":"Maxton Design","offers":[{"title":"Gloss Black","offer_id":47326416535848,"sku":"MXT-AU-RS3-8V-RSD2G","price":79.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/5767\/7352\/files\/maxton-design-rear-side-diffusers-v2-audi-rs3-8v-sportback-15-16-gloss-black-splitters-skirts-120.webp?v=1745141861"},{"product_id":"maxton-design-rear-valance-audi-rs3-8v-sportback-15-16","title":"Maxton Design Rear Valance Audi RS3 8V Sportback 15-16","description":"\u003cp\u003e\u003c\/p\u003e\u003cp\u003eREAR VALANCE AUDI RS3 8V SPORTBACK (2015-2016)\u003cbr\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan\u003e\u003cbr\u003e\u003cspan\u003e\u003cu\u003e\u003cspan\u003eFits Only:  \u003c\/span\u003e\u003c\/u\u003e\u003c\/span\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan\u003eAUDI RS3 8V SPORTBACK (2015-2016)\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan\u003eCOMPLETE SET CONTAINS:\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan\u003eRear Diffuser\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan\u003eThis product requires the removal of the original diffuser, self-tapping screws are needed to secure fitment of the new diffuser.\u003c\/span\u003e\u003cbr\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan\u003e\u003cspan\u003eOur full fitting manual can be found here:\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan\u003e\u003cspan\u003e\u003ca\u003e\u003cspan\u003ehttps:\/\/www.maxtondesign.co.uk\/pdf\/diffuser-no-clips-included-manual.pdf\u003c\/span\u003e\u003c\/a\u003e\u003c\/span\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan\u003eCHARACTERISTICS:\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan\u003eAdds aesthetic value.\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan\u003eLightweight and offers some flexibility.\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan\u003eThis product is made from ABS plastic. The same material is used widely in the automotive industry.\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan\u003eMORE INFORMATION:\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan\u003eNo additional work is required to finish the product.\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan\u003eThe product will arrive with a protective film.  \u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan\u003eRemoval of the protective film will void any returns, only remove once you are certain the product will fit.\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan\u003eWe cannot be held responsible for the incorrect installation or use of this product.\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan\u003ePlease compare the vehicle in the listing photos and title to your own, to ensure correct fitment.  \u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan\u003eWe advise trusting installation to a qualified professional unless you are confident following the provided fitting manual.\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan\u003eThis product has been TUV MATERIALGUTACHTEN certified.\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan\u003eThe removal of the holographic verification sticker will void a return, this identifies the item as an official and authentic Maxton Design product, removal is at buyer’s risk.\u003c\/span\u003e\u003c\/p\u003e","brand":"Maxton Design","offers":[{"title":"Gloss Black","offer_id":47326416634152,"sku":"MXT-AU-RS3-8V-RS1G","price":174.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/5767\/7352\/files\/maxton-design-rear-valance-audi-rs3-8v-sportback-15-16-gloss-black-splitters-skirts-diffusers-754.webp?v=1745141957"},{"product_id":"maxton-design-maxton-racing-front-splitter-flaps-audi-rs3-8v-sportback-15-16","title":"Maxton Design Maxton Racing Front Splitter +flaps Audi RS3 8V Sportback 15-16","description":"\u003cp\u003e\u003cspan\u003eMAXTON RACING FRONT SPLITTER (+FLAPS) AUDI RS3 8V SPORTBACK (2015-2016)\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan\u003e\u003cu\u003e\u003cbr\u003e\u003cspan\u003eFITS ONLY : \u003c\/span\u003e\u003c\/u\u003e\u003cbr\u003e\u003cspan\u003eAudi RS3 8V Sportback (2015-2016)\u003c\/span\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cu\u003e\u003cspan\u003eCOMPLETE SET CONTAINS:\u003c\/span\u003e\u003c\/u\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan\u003e§  Maxton Racing Front Splitter (Black + Matte Flaps)\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan\u003e§  Mounting kit\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan\u003eMaxton Racing properties include:\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan\u003e§  A more durable material; 10 mm thick ABS plastic.\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan\u003e§  Increased impact and scratch resistance.\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan\u003e§  New designs, providing a new unique style.\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan\u003e§  UV protective coating.\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan\u003e§  Temperature\/weather resistant.\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan\u003e§  Products arrive with protective film vacuum sealed to it.\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan\u003e§  No painting required.\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan\u003e§  Multiple finish options: 10 mm thick matte black, 10 mm thick matte black with a red core.\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan\u003e§  If you decide to paint the product, primer must be used first.\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan\u003e§\u003c\/span\u003e\u003cspan\u003e Parts are labelled confirming authenticity and quality of the product.\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan\u003eThis product has been TUV MATERIALGUTACHTEN certified (TUV certify for material).\u003c\/span\u003e\u003c\/p\u003e","brand":"Maxton Design","offers":[{"title":"Black + Gloss Flaps","offer_id":47326416666920,"sku":"MXT-AURS38VCNC-FD3B+FSF1G","price":219.0,"currency_code":"GBP","in_stock":true},{"title":"Black-Red + Gloss Flaps","offer_id":47326416699688,"sku":"MXT-AURS38VCNC-FD3BRB+FSF1G","price":259.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/5767\/7352\/files\/maxton-design-racing-front-splitter-flaps-audi-rs3-8v-sportback-15-16-black-gloss-splitters-skirts-diffusers-116.webp?v=1745138954"},{"product_id":"maxton-design-maxton-racing-front-splitter-audi-rs3-8v-sportback-15-16","title":"Maxton Design Maxton Racing Front Splitter Audi RS3 8V Sportback 15-16","description":"\u003cp\u003e\u003cspan\u003eMAXTON RACING FRONT SPLITTER AUDI RS3 8V SPORTBACK\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan\u003e\u003cu\u003e\u003cbr\u003e\u003cspan\u003eFITS ONLY : \u003c\/span\u003e\u003c\/u\u003e\u003cbr\u003e\u003cspan\u003eAudi RS3 8V Sportback (2015-2016)\u003c\/span\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cu\u003e\u003cspan\u003eCOMPLETE SET CONTAINS:\u003c\/span\u003e\u003c\/u\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan\u003e§  Maxton Racing Front Splitter\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan\u003e§  Mounting kit\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan\u003eMaxton Racing properties include:\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan\u003e§  A more durable material; 10 mm thick ABS plastic.\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan\u003e§  Increased impact and scratch resistance.\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan\u003e§  New designs, providing a new unique style.\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan\u003e§  UV protective coating.\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan\u003e§  Temperature\/weather resistant.\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan\u003e§  Products arrive with protective film vacuum sealed to it.\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan\u003e§  No painting required.\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan\u003e§  Multiple finish options: 10 mm thick matte black, 10 mm thick matte black with a red core.\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan\u003e§  If you decide to paint the product, primer must be used first.\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan\u003e§\u003c\/span\u003e\u003cspan\u003e Parts are labelled confirming authenticity and quality of the product.\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan\u003eThis product has been TUV MATERIALGUTACHTEN certified (TUV certify for material).\u003c\/span\u003e\u003c\/p\u003e","brand":"Maxton Design","offers":[{"title":"Black","offer_id":47326416797992,"sku":"MXT-AURS38VCNC-FD3B","price":159.0,"currency_code":"GBP","in_stock":true},{"title":"Black-Red","offer_id":47326416830760,"sku":"MXT-AURS38VCNC-FD3BRB","price":199.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/5767\/7352\/files\/maxton-design-racing-front-splitter-audi-rs3-8v-sportback-15-16-splitters-skirts-diffusers-715.webp?v=1745136310"},{"product_id":"maxton-design-front-splitter-flaps-audi-rs3-8v-sportback-15-16","title":"Maxton Design Front Splitter Flaps Audi RS3 8V Sportback 15-16","description":"\u003cp\u003eFRONT SPLITTER FLAPS AUDI RS3 8V SPORTBACK\u003c\/p\u003e\u003cp\u003e\u003cspan\u003e\u003cu\u003e\u003cspan\u003eFITS ONLY: \u003c\/span\u003e\u003c\/u\u003e\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan\u003eAudi RS3 8V Sportback (2015-2016)\u003cbr\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan\u003e\u003cbr\u003e** FITS ONLY WITH \u003cspan\u003e\u003c\/span\u003eAURS38VCNC-FD3B **\u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cu\u003e\u003cspan\u003eCOMPLETE SET CONTAINS:\u003c\/span\u003e\u003c\/u\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan\u003e- Flaps\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan\u003e- Fitting kit\u003c\/span\u003e\u003c\/p\u003e","brand":"Maxton Design","offers":[{"title":"Default Title","offer_id":47326416863528,"sku":"MXT-AURS38VCNC-FSF1G","price":59.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/5767\/7352\/files\/maxton-design-front-splitter-flaps-audi-rs3-8v-sportback-15-16-splitters-skirts-diffusers-526.webp?v=1745138089"},{"product_id":"maxton-design-maxton-racing-rear-diffuser-v1-audi-rs3-8v-sportback-15-16","title":"Maxton Design Maxton Racing Rear Diffuser V1 Audi RS3 8V Sportback 15-16","description":"\u003cp\u003e\u003cspan\u003eMAXTON RACING REAR DIFFUSER AUDI RS3 8V SPORTBACK\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan\u003e\u003cu\u003e\u003cbr\u003e\u003cspan\u003eFITS ONLY : \u003c\/span\u003e\u003c\/u\u003e\u003cbr\u003e\u003cspan\u003eAudi RS3 8V Sportback (2015-2016)\u003c\/span\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cu\u003e\u003cspan\u003eCOMPLETE SET CONTAINS:\u003c\/span\u003e\u003c\/u\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan\u003e§  Maxton Racing Rear Diffuser\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan\u003e§  Mounting kit\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan\u003eMaxton Racing properties include:\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan\u003e§  A more durable material; 10 mm thick ABS plastic.\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan\u003e§  Increased impact and scratch resistance.\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan\u003e§  New designs, providing a new unique style.\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan\u003e§  UV protective coating.\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan\u003e§  Temperature\/weather resistant.\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan\u003e§  Products arrive with protective film vacuum sealed to it.\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan\u003e§  No painting required.\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan\u003e§  Multiple finish options: 10 mm thick matte black, 10 mm thick matte black with a red core.\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan\u003e§  If you decide to paint the product, primer must be used first.\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan\u003e§ \u003c\/span\u003e\u003cspan\u003eParts are labelled confirming authenticity and quality of the product.\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan\u003eThis product has been TUV MATERIALGUTACHTEN certified (TUV certify for material).\u003c\/span\u003e\u003c\/p\u003e","brand":"Maxton Design","offers":[{"title":"Black","offer_id":47326416896296,"sku":"MXT-AURS38VCNC-RS3B","price":159.0,"currency_code":"GBP","in_stock":true},{"title":"Black-Red","offer_id":47326416929064,"sku":"MXT-AURS38VCNC-RS3B+BRBI","price":199.0,"currency_code":"GBP","in_stock":true},{"title":"Red","offer_id":47326416961832,"sku":"MXT-AURS38VCNC-RS3BRB","price":199.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/5767\/7352\/files\/maxton-design-racing-rear-diffuser-v1-audi-rs3-8v-sportback-15-16-splitters-skirts-diffusers-721.webp?v=1745139524"},{"product_id":"maxton-design-maxton-racing-rear-diffuser-v2-audi-rs3-8v-sportback-15-16","title":"Maxton Design Maxton Racing Rear Diffuser V2 Audi RS3 8V Sportback 15-16","description":"\u003cp\u003e\u003cspan\u003eMAXTON RACING REAR DIFFUSER V2 AUDI RS3 8V SPORTBACK\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan\u003e\u003cu\u003e\u003cbr\u003e\u003cspan\u003eFITS ONLY : \u003c\/span\u003e\u003c\/u\u003e\u003cbr\u003e\u003cspan\u003eAudi RS3 8V Sportback (2015-2016)\u003c\/span\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cu\u003e\u003cspan\u003eCOMPLETE SET CONTAINS:\u003c\/span\u003e\u003c\/u\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan\u003e§  Maxton Racing Rear Diffuser\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan\u003e§  Mounting kit\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan\u003eMaxton Racing properties include:\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan\u003e§  A more durable material; 10 mm thick ABS plastic.\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan\u003e§  Increased impact and scratch resistance.\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan\u003e§  New designs, providing a new unique style.\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan\u003e§  UV protective coating.\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan\u003e§  Temperature\/weather resistant.\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan\u003e§  Products arrive with protective film vacuum sealed to it.\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan\u003e§  No painting required.\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan\u003e§  Multiple finish options: 10 mm thick matte black, 10 mm thick matte black with a red core.\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan\u003e§  If you decide to paint the product, primer must be used first.\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan\u003e§ \u003c\/span\u003e\u003cspan\u003eParts are labelled confirming authenticity and quality of the product.\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan\u003eThis product has been TUV MATERIALGUTACHTEN certified (TUV certify for material).\u003c\/span\u003e\u003c\/p\u003e","brand":"Maxton Design","offers":[{"title":"Black","offer_id":47326416994600,"sku":"MXT-AURS38VCNC-RS4B","price":159.0,"currency_code":"GBP","in_stock":true},{"title":"Black-Red","offer_id":47326417027368,"sku":"MXT-AURS38VCNC-RS4B+BRBI","price":199.0,"currency_code":"GBP","in_stock":true},{"title":"Red","offer_id":47326417060136,"sku":"MXT-AURS38VCNC-RS4BRB","price":199.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/5767\/7352\/files\/maxton-design-racing-rear-diffuser-v2-audi-rs3-8v-sportback-15-16-splitters-skirts-diffusers-240.webp?v=1745139266"},{"product_id":"maxton-design-side-skirt-flaps-audi-rs3-8v-sportback-01-16","title":"Maxton Design Side Skirt Flaps Audi RS3 8V Sportback 01-16","description":"\u003cp\u003e\u003cspan\u003eSIDE SKIRT FLAPS AUDI RS3 8V SPORTBACK\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan\u003e\u003cu\u003e\u003cspan\u003eFITS ONLY:  \u003c\/span\u003e\u003cbr\u003e\u003c\/u\u003e\u003c\/span\u003eAudi RS3 8V Sportback (2015-2016)\u003cu\u003e\u003c\/u\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e** F\u003cspan\u003e\u003cspan\u003eITS ONLY WITH AURS38VCNC-SD2B **\u003c\/span\u003e\u003c\/span\u003e\u003ci\u003e\u003c\/i\u003e\u003cu\u003e\u003c\/u\u003e\u003cbr\u003e\u003c\/p\u003e\u003cp\u003e\u003cu\u003e\u003cspan\u003eCOMPLETE SET CONTAINS:\u003c\/span\u003e\u003c\/u\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan\u003e §   FLAPS (GLOSS OR MATTE)\u003c\/span\u003e\u003c\/p\u003e","brand":"Maxton Design","offers":[{"title":"Default Title","offer_id":47326417092904,"sku":"MXT-AURS38VCNC-SRF1G","price":59.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/5767\/7352\/files\/maxton-design-side-skirt-flaps-audi-rs3-8v-sportback-01-16-splitters-skirts-diffusers-534.webp?v=1745143465"},{"product_id":"maxton-design-maxton-racing-side-skirt-splitters-flaps-audi-rs3-8v-sportback-15-16","title":"Maxton Design Maxton Racing Side Skirt Splitters +flaps Audi RS3 8V Sportback 15-16","description":"     \u003cp\u003e\u003cspan\u003eMAXTON RACING SIDE SKIRT SPLITTERS (+FLAPS) AUDI RS3 8V SPORTBACK (2015-2016)\u003c\/span\u003e\u003c\/p\u003e \u003cp\u003e\u003cspan\u003e\u003cu\u003e\u003cbr\u003e\u003cspan\u003eFITS ONLY :  \u003c\/span\u003e\u003c\/u\u003e\u003cbr\u003e\u003cspan\u003eAudi RS3 8V Sportback (2015-2016)\u003c\/span\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e \u003cp\u003e\u003cu\u003e\u003cspan\u003eCOMPLETE SET CONTAINS:\u003c\/span\u003e\u003c\/u\u003e\u003c\/p\u003e \u003cp\u003e\u003cspan\u003e §   Maxton Racing Side Skirt Splitters\u003c\/span\u003e\u003c\/p\u003e \u003cp\u003e\u003cspan\u003e §   Mounting kit\u003c\/span\u003e\u003c\/p\u003e \u003cp\u003e\u003cspan\u003eMaxton Racing properties include:\u003c\/span\u003e\u003c\/p\u003e \u003cp\u003e\u003cspan\u003e §   A more durable material; 10 mm thick ABS plastic.\u003c\/span\u003e\u003c\/p\u003e \u003cp\u003e\u003cspan\u003e §   Increased impact and scratch resistance.\u003c\/span\u003e\u003c\/p\u003e \u003cp\u003e\u003cspan\u003e §   New designs, providing a new unique style.\u003c\/span\u003e\u003c\/p\u003e \u003cp\u003e\u003cspan\u003e §   UV protective coating.\u003c\/span\u003e\u003c\/p\u003e \u003cp\u003e\u003cspan\u003e §   Temperature\/weather resistant.\u003c\/span\u003e\u003c\/p\u003e \u003cp\u003e\u003cspan\u003e §   Products arrive with protective film vacuum sealed to it.\u003c\/span\u003e\u003c\/p\u003e \u003cp\u003e\u003cspan\u003e §   No painting required.\u003c\/span\u003e\u003c\/p\u003e \u003cp\u003e\u003cspan\u003e §   Multiple finish options: 10 mm thick matte black, 10 mm thick matte black with a red core.\u003c\/span\u003e\u003c\/p\u003e \u003cp\u003e\u003cspan\u003e §   If you decide to paint the product, primer must be used first.\u003c\/span\u003e\u003c\/p\u003e \u003cp\u003e\u003cspan\u003e §\u003c\/span\u003e\u003cspan\u003e  Parts are labelled confirming authenticity and quality of the product.\u003c\/span\u003e\u003c\/p\u003e \u003cp\u003e\u003cspan\u003eThis product has been TUV MATERIALGUTACHTEN certified (TUV certify for material).\u003c\/span\u003e\u003c\/p\u003e  ","brand":"Maxton Design","offers":[{"title":"Black + Gloss Flaps","offer_id":47326417125672,"sku":"MXT-AURS38VCNC-SD2B+SRF1G","price":219.0,"currency_code":"GBP","in_stock":true},{"title":"Black-Red + Gloss Flaps","offer_id":47326417158440,"sku":"MXT-AURS38VCNC-SD2BRB+SRF1G","price":259.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/5767\/7352\/files\/maxton-design-racing-side-skirt-splitters-flaps-audi-rs3-8v-sportback-15-16-skirts-diffusers-150.webp?v=1745141275"},{"product_id":"maxton-design-maxton-racing-rear-side-splitters-audi-rs3-8v-sportback-15-16","title":"Maxton Design Maxton Racing Rear Side Splitters Audi RS3 8V Sportback 15-16","description":"\u003cp\u003e\u003cspan\u003eMAXTON RACING REAR SIDE SPLITTERS AUDI RS3 8V SPORTBACK  \u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan\u003e\u003cu\u003e\u003cspan\u003eFITS ONLY:  \u003c\/span\u003e\u003cbr\u003e\u003c\/u\u003e\u003c\/span\u003e\u003cspan\u003eAudi RS3 8V Sportback (2015-2016)\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cu\u003e\u003cspan\u003eCOMPLETE SET CONTAINS:\u003c\/span\u003e\u003c\/u\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan\u003e §   Maxton Racing Rear Side Splitters\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan\u003e §   Mounting kit\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan\u003eMaxton Racing properties include:\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan\u003e §   A more durable material; 10 mm thick ABS plastic.\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan\u003e §   Increased impact and scratch resistance.\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan\u003e §   New designs, providing a new unique style.\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan\u003e §   UV protective coating.\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan\u003e §   Temperature\/weather resistant.\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan\u003e §   Products arrive with protective film vacuum sealed to it.\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan\u003e §   No painting required.\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan\u003e §   Multiple finish options: 10 mm thick matte black, 10 mm thick matte black with a red core.\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan\u003e §   If you decide to paint the product, primer must be used first.\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan\u003e §  \u003c\/span\u003e\u003cspan\u003eParts are labelled confirming authenticity and quality of the product.\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan\u003eThis product has been TUV MATERIALGUTACHTEN certified (TUV certify for material).\u003c\/span\u003e\u003c\/p\u003e","brand":"Maxton Design","offers":[{"title":"Black","offer_id":47326417191208,"sku":"MXT-AURS38VCNC-RSD1B","price":59.0,"currency_code":"GBP","in_stock":true},{"title":"Black-Red","offer_id":47326417223976,"sku":"MXT-AURS38VCNC-RSD1BRB","price":79.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/5767\/7352\/files\/maxton-design-racing-rear-side-splitters-audi-rs3-8v-sportback-15-16-skirts-diffusers-866.webp?v=1745140084"},{"product_id":"maxton-design-maxton-racing-rear-side-splitters-flaps-audi-rs3-8v-sportback-15-16","title":"Maxton Design Maxton Racing Rear Side Splitters +flaps Audi RS3 8V Sportback 15-16","description":"\u003cp\u003e\u003cspan\u003eMAXTON RACING REAR SIDE SPLITTERS (+FLAPS) AUDI RS3 8V SPORTBACK\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan\u003e\u003cu\u003e\u003cspan\u003eFITS ONLY:  \u003c\/span\u003e\u003cbr\u003e\u003c\/u\u003e\u003c\/span\u003e\u003cspan\u003eAudi RS3 8V Sportback (2015-2016)\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cu\u003e\u003cspan\u003eCOMPLETE SET CONTAINS:\u003c\/span\u003e\u003c\/u\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan\u003e §   Maxton Racing Rear Side Splitters (+FLAPS)\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan\u003e §   Mounting kit\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan\u003eMaxton Racing properties include:\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan\u003e §   A more durable material; 10 mm thick ABS plastic.\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan\u003e §   Increased impact and scratch resistance.\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan\u003e §   New designs, providing a new unique style.\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan\u003e §   UV protective coating.\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan\u003e §   Temperature\/weather resistant.\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan\u003e §   Products arrive with protective film vacuum sealed to it.\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan\u003e §   No painting required.\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan\u003e §   Multiple finish options: 10 mm thick matte black, 10 mm thick matte black with a red core.\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan\u003e §   If you decide to paint the product, primer must be used first.\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan\u003e §  \u003c\/span\u003e\u003cspan\u003eParts are labelled confirming authenticity and quality of the product.\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan\u003eThis product has been TUV MATERIALGUTACHTEN certified (TUV certify for material).\u003c\/span\u003e\u003c\/p\u003e","brand":"Maxton Design","offers":[{"title":"Black + Gloss Flaps","offer_id":47326417256744,"sku":"MXT-AURS38VCNC-RSD1B+RSF1G","price":119.0,"currency_code":"GBP","in_stock":true},{"title":"Black-Red + Gloss Flaps","offer_id":47326417289512,"sku":"MXT-AURS38VCNC-RSD1BRB+RSF1G","price":139.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/5767\/7352\/files\/maxton-design-racing-rear-side-splitters-flaps-audi-rs3-8v-sportback-15-16-skirts-diffusers-891.webp?v=1745136969"},{"product_id":"maxton-design-maxton-racing-side-skirt-splitters-audi-rs3-8v-sportback-15-16","title":"Maxton Design Maxton Racing Side Skirt Splitters Audi RS3 8V Sportback 15-16","description":"\u003cp\u003e\u003cspan\u003eMAXTON RACING SIDE SKIRT SPLITTERS AUDI RS3 8V SPORTBACK  \u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan\u003e\u003cu\u003e\u003cbr\u003e\u003cspan\u003eFITS ONLY :  \u003c\/span\u003e\u003c\/u\u003e\u003cbr\u003e\u003cspan\u003eAudi RS3 8V Sportback (2015-2016)\u003c\/span\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cu\u003e\u003cspan\u003eCOMPLETE SET CONTAINS:\u003c\/span\u003e\u003c\/u\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan\u003e §   Maxton Racing Side Skirt Splitters\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan\u003e §   Mounting kit\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan\u003eMaxton Racing properties include:\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan\u003e §   A more durable material; 10 mm thick ABS plastic.\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan\u003e §   Increased impact and scratch resistance.\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan\u003e §   New designs, providing a new unique style.\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan\u003e §   UV protective coating.\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan\u003e §   Temperature\/weather resistant.\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan\u003e §   Products arrive with protective film vacuum sealed to it.\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan\u003e §   No painting required.\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan\u003e §   Multiple finish options: 10 mm thick matte black, 10 mm thick matte black with a red core.\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan\u003e §   If you decide to paint the product, primer must be used first.\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan\u003e §\u003c\/span\u003e\u003cspan\u003e  Parts are labelled confirming authenticity and quality of the product.\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan\u003eThis product has been TUV MATERIALGUTACHTEN certified (TUV certify for material).\u003c\/span\u003e\u003c\/p\u003e","brand":"Maxton Design","offers":[{"title":"Black","offer_id":47326417322280,"sku":"MXT-AURS38VCNC-SD2B","price":159.0,"currency_code":"GBP","in_stock":true},{"title":"Black-Red","offer_id":47326417355048,"sku":"MXT-AURS38VCNC-SD2BRB","price":199.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/5767\/7352\/files\/maxton-design-racing-side-skirt-splitters-audi-rs3-8v-sportback-15-16-skirts-diffusers-487.webp?v=1745135184"},{"product_id":"maxton-design-rear-side-flaps-audi-rs3-8v-sportback-15-16","title":"Maxton Design Rear Side Flaps Audi RS3 8V Sportback 15-16","description":"\u003cp\u003e\u003cspan\u003eREAR SIDE FLAPS AUDI RS3 8V SPORTBACK\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan\u003e\u003cu\u003e\u003cspan\u003eFITS ONLY:  \u003c\/span\u003e\u003cbr\u003e\u003c\/u\u003e\u003c\/span\u003e\u003cspan\u003eAudi RS3 8V Sportback (2015-2016)\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003e* Fits only with : AURS38VCNC-RSD1 *\u003c\/span\u003e\u003ci\u003e\u003c\/i\u003e\u003cu\u003e\u003c\/u\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cu\u003e\u003cspan\u003eCOMPLETE SET CONTAINS:\u003c\/span\u003e\u003c\/u\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan\u003e §   FLAPS (GLOSS OR MATTE)\u003c\/span\u003e\u003c\/p\u003e","brand":"Maxton Design","offers":[{"title":"Default Title","offer_id":47326417387816,"sku":"MXT-AURS38VCNC-RSF1G","price":59.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/5767\/7352\/files\/maxton-design-rear-side-flaps-audi-rs3-8v-sportback-15-16-splitters-skirts-diffusers-172.webp?v=1745137925"},{"product_id":"maxton-design-front-splitter-v-3-audi-rs3-8v-facelift-2017-up","title":"Maxton Design Front Splitter V.3 Audi RS3 8V Facelift 2017-UP","description":"\u003cp\u003eFRONT SPLITTER V.3 AUDI RS3 8V FACELIFT (2017-UP)\u003c\/p\u003e\u003cp\u003e\u003cu\u003e\u003cspan\u003e\u003cspan\u003eFits only:\u003c\/span\u003e\u003c\/span\u003e\u003c\/u\u003e \u003cbr\u003e\u003cspan\u003e AUDI RS3 8V FACELIFT SPORTBACK (2017-UP)\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eAUDI RS3 8V FACELIFT SEDAN (2017-UP)\u003c\/span\u003e\u003cbr\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan\u003e\u003cu\u003e\u003cspan\u003e\u003cbr\u003e\u003cspan\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/u\u003e\u003c\/span\u003e\u003cspan\u003e\u003cu\u003eCOMPLETE SET CONTAINS:\u003c\/u\u003e\u003c\/span\u003e\u003cbr\u003e-\u0026gt; Splitter\/Front Bumper Lip Spoiler\u003cbr\u003e-\u0026gt; Mounting Kit\u003cbr\u003e-\u0026gt; Mounting Manual\u003cbr\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan\u003eFitting manual: \u003c\/span\u003e\u003ca\u003ehttps:\/\/www.maxtondesign.co.uk\/pdf\/splitter_fitting-manual-maxton.pdf\u003c\/a\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan\u003e\u003c\/span\u003e\u003cspan\u003e\u003cspan\u003ePlease note, the majority of our products are made from ABS plastic, the flexibility of these products provides them the ability to withstand some pressure.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e\u003c\/span\u003e\u003cspan\u003e\u003cspan\u003eWe highly recommend installations are completed by a professional to ensure the product is fitted correctly and according to our fitting manuals.\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003eWe can only accept a return within 30 days of delivery, if the product is in its original condition including protective film still on. A refund will be processed excluding shipping costs.\u003cbr\u003e\u003cspan\u003e\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eAll products arrive with a protective film, this is a very thin plastic vacuum sealed around the product to avoid the item sustaining any damage. Once removed you will notice the product does not have any scuffs or scratches. \u003c\/span\u003e\u003c\/p\u003e","brand":"Maxton Design","offers":[{"title":"Gloss Black","offer_id":47326417453352,"sku":"MXT-AU-RS3-8VF-FD3G","price":174.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/5767\/7352\/files\/maxton-design-front-splitter-v-3-audi-rs3-8v-facelift-2017-up-gloss-black-splitters-skirts-diffusers-668.webp?v=1745137205"},{"product_id":"maxton-design-front-splitter-v-4-audi-rs3-8v-facelift-2017-up","title":"Maxton Design Front Splitter V.4 Audi RS3 8V Facelift 2017-UP","description":"\u003cspan\u003eFRONT SPLITTER V.4 AUDI RS3 8V FACELIFT\u003cp\u003e\u003cu\u003e\u003cspan\u003e\u003cspan\u003eFits only:\u003c\/span\u003e\u003c\/span\u003e\u003c\/u\u003e \u003cbr\u003e\u003cspan\u003eAUDI RS3 8V FACELIFT SPORTBACK (2017-UP)\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eAUDI RS3 8V FACELIFT SEDAN (2017-UP)\u003c\/span\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cu\u003e\u003cspan\u003e\u003cbr\u003e\u003cspan\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/u\u003e\u003c\/span\u003e\u003cspan\u003e\u003cu\u003eCOMPLETE SET CONTAINS:\u003c\/u\u003e\u003c\/span\u003e\u003cbr\u003e-\u0026gt; Splitter\/Front Bumper Lip Spoiler\u003cbr\u003e-\u0026gt; Mounting Kit\u003cbr\u003e-\u0026gt; Mounting Manual\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eFitting manual: \u003c\/span\u003e\u003ca\u003ehttps:\/\/www.maxtondesign.co.uk\/pdf\/splitter_fitting-manual-maxton.pdf\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003c\/span\u003e\u003cspan\u003e\u003cspan\u003ePlease note, the majority of our products are made from ABS plastic, the flexibility of these products provides them the ability to withstand some pressure.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e\u003c\/span\u003e\u003cspan\u003e\u003cspan\u003eWe highly recommend installations are completed by a professional to ensure the product is fitted correctly and according to our fitting manuals.\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003eWe can only accept a return within 30 days of delivery, if the product is in its original condition including protective film still on. A refund will be processed excluding shipping costs.\u003cbr\u003e\u003cspan\u003e\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eAll products arrive with a protective film, this is a very thin plastic vacuum sealed around the product to avoid the item sustaining any damage. Once removed you will notice the product does not have any scuffs or scratches. \u003c\/span\u003e\u003c\/p\u003e\u003c\/span\u003e","brand":"Maxton Design","offers":[{"title":"Gloss Black","offer_id":47326417551656,"sku":"MXT-AU-RS3-8VF-FD4G","price":174.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/5767\/7352\/files\/maxton-design-front-splitter-v-4-audi-rs3-8v-facelift-2017-up-gloss-black-splitters-skirts-diffusers-137.webp?v=1745135271"},{"product_id":"maxton-design-rear-side-splitters-v-2-audi-rs3-8v-sportback-facelift-2017-up","title":"Maxton Design Rear Side Splitters V.2 Audi RS3 8V Sportback Facelift 2017-UP","description":"\u003cp\u003eREAR SIDE SPLITTERS V.2 AUDI RS3 8V SPORTBACK FACELIFT (2017-UP)\u003c\/p\u003e\u003cp\u003e\u003cspan\u003e\u003cspan\u003e\u003cu\u003eFits Only:\u003c\/u\u003e\u003c\/span\u003e\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan\u003eAUDI RS3 8V SPORTBACK FACELIFT (2017-UP)\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan\u003e\u003c\/span\u003e\u003cspan\u003eThis product is only compatible with - \u003c\/span\u003e\u003cspan\u003eRS3-8VF-RS2\u003c\/span\u003e\u003cbr\u003e\u003c\/p\u003e\u003cp\u003e\u003cbr\u003e\u003cspan\u003e\u003cu\u003e\u003cspan\u003e\u003cbr\u003eCOMPLETE SET CONTAINS:\u003c\/span\u003e\u003c\/u\u003e\u003c\/span\u003e\u003cspan\u003e\u003cbr\u003e-\u0026gt; Rear Side Splitters (Left \u0026amp; right)\u003cbr\u003e\u003c\/span\u003e\u003ca\u003e-\u003c\/a\u003e\u003cspan\u003e\u0026gt; Fitting manual \/ Fitting kit\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan\u003e\u003ca\u003ehttps:\/\/www.maxtondesign.co.uk\/pdf\/rear-side-splitters_fitting-manual-maxton.pdf\u003c\/a\u003e\u003c\/span\u003e\u003cbr\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan\u003e\u003cspan\u003e\u003cspan\u003e\u003cbr\u003ePlease note, the majority of our products are made from ABS plastic, the flexibility of these products provides them the ability to withstand some pressure.\u003c\/span\u003e\u003c\/span\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan\u003e\u003cspan\u003e\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e\u003c\/span\u003e\u003cspan\u003eWe highly recommend installations are completed by a professional to ensure the product is fitted correctly and according to our fitting manuals.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e\u003cspan\u003eWe can only accept a return within 30 days of delivery, if the product is in its original condition including protective film still on. A refund will be processed excluding shipping costs.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e\u003c\/span\u003e\u003c\/span\u003e\u003cspan\u003eAll products arrive with a protective film, this is a very thin plastic vacuum sealed around the product to avoid the item sustaining any damage. Once removed you will notice the product does not have any scuffs or scratches. \u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e","brand":"Maxton Design","offers":[{"title":"Gloss Black","offer_id":47326417649960,"sku":"MXT-AU-RS3-8VF-RSD2G","price":79.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/5767\/7352\/files\/maxton-design-rear-side-splitters-v-2-audi-rs3-8v-sportback-facelift-2017-up-gloss-black-skirts-diffusers-170.webp?v=1745135500"},{"product_id":"maxton-design-side-skirts-diffusers-v-2-audi-rs3-8v-sportback-facelift-2017-up","title":"Maxton Design Side Skirts Diffusers V.2 Audi RS3 8V Sportback Facelift 2017-UP","description":"\u003cp\u003eSIDE SKIRTS DIFFUSERS V.2 AUDI RS3 8V SPORTBACK FACELIFT (2017-UP)\u003c\/p\u003e\u003cp\u003e\u003cu\u003e\u003cspan\u003e\u003cspan\u003eFits Only:\u003c\/span\u003e\u003c\/span\u003e\u003c\/u\u003e\u003cspan\u003e \u003cbr\u003e\u003c\/span\u003e\u003cspan\u003e\u003cspan\u003e AUDI RS3 8V SPORTBACK FACELIFT (2017-UP)\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan\u003e\u003cu\u003e\u003cspan\u003e\u003cspan\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/u\u003e\u003c\/span\u003e\u003cspan\u003e\u003cu\u003eCOMPLETE SET CONTAINS:\u003c\/u\u003e\u003c\/span\u003e\u003cbr\u003e-\u0026gt; Side Skirt Splitters\u003cbr\u003e-\u0026gt; Mounting Kit\u003cbr\u003e-\u0026gt; Mounting Manual\u003cbr\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan\u003eFitting manual: \u003c\/span\u003e\u003ca\u003ehttps:\/\/www.maxtondesign.co.uk\/pdf\/side-skirts-diffusers_fitting-manual-maxton.pdf\u003c\/a\u003e\u003ca\u003e\u003cbr\u003e\u003c\/a\u003e\u003cspan\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan\u003e\u003c\/span\u003e\u003cspan\u003e\u003cspan\u003ePlease note, the majority of our products are made from ABS plastic, the flexibility of these products provides them the ability to withstand some pressure.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e\u003c\/span\u003e\u003cspan\u003e\u003cspan\u003eWe highly recommend installations are completed by a professional to ensure the product is fitted correctly and according to our fitting manuals.\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003eWe can only accept a return within 30 days of delivery, if the product is in its original condition including protective film still on. A refund will be processed excluding shipping costs.\u003cbr\u003e\u003cspan\u003e\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eAll products arrive with a protective film, this is a very thin plastic vacuum sealed around the product to avoid the item sustaining any damage. Once removed you will notice the product does not have any scuffs or scratches. \u003c\/span\u003e\u003c\/p\u003e","brand":"Maxton Design","offers":[{"title":"Gloss Black","offer_id":47326417748264,"sku":"MXT-AU-RS3-8VF-SD2G","price":174.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/5767\/7352\/files\/maxton-design-side-skirts-diffusers-v-2-audi-rs3-8v-sportback-facelift-2017-up-gloss-black-splitters-654.webp?v=1745132825"},{"product_id":"maxton-design-rear-valance-v-2-audi-rs3-8v-facelift-2017","title":"Maxton Design Rear Valance V.2 Audi RS3 8V Facelift 2017-","description":"\u003cp\u003eREAR VALANCE V.2 AUDI RS3 8V FACELIFT (2017-)\u003c\/p\u003e\u003cp\u003e\u003cspan\u003e\u003cbr\u003e\u003cspan\u003e\u003cu\u003e\u003cspan\u003eFits Only: \u003c\/span\u003e\u003c\/u\u003e\u003c\/span\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan\u003eAUDI RS3 8V FACELIFT (2017-)\u003c\/span\u003e\u003c\/p\u003e\u003cspan\u003eFits original bumper,exhaust tips are not included in our offer.\u003c\/span\u003e\u003cp\u003e\u003cspan\u003eCOMPLETE SET CONTAINS:\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan\u003eRear Diffuser\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan\u003e\u003cspan\u003eThis product requires the removal of the original diffuser, self-tapping screws are needed to secure fitment of the new diffuser.\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan\u003e\u003cspan\u003eOur full fitting manual can be found here:\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan\u003e\u003cspan\u003e\u003ca\u003ehttps:\/\/www.maxtondesign.co.uk\/pdf\/diffuser-clips-included-manual.pdf\u003c\/a\u003e\u003c\/span\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan\u003eCHARACTERISTICS:\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan\u003eAdds aesthetic value.\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan\u003eLightweight and offers some flexibility.\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan\u003eThis product is made from ABS plastic. The same material is used widely in the automotive industry.\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan\u003eMORE INFORMATION:\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan\u003eNo additional work is required to finish the product.\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan\u003eThe product will arrive with a protective film. \u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan\u003eRemoval of the protective film will void any returns, only remove once you are certain the product will fit.\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan\u003eWe cannot be held responsible for the incorrect installation or use of this product.\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan\u003ePlease compare the vehicle in the listing photos and title to your own, to ensure correct fitment. \u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan\u003eWe advise trusting installation to a qualified professional unless you are confident following the provided fitting manual.\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan\u003eThis product has been TUV MATERIALGUTACHTEN certified.\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan\u003eThe removal of the holographic verification sticker will void a return, this identifies the item as an official and authentic Maxton Design product, removal is at buyer’s risk.\u003c\/span\u003e\u003c\/p\u003e","brand":"Maxton Design","offers":[{"title":"Default Title","offer_id":47326417912104,"sku":"MXT-AU-RS3-8VF-RS2GOO__OO","price":174.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/5767\/7352\/files\/maxton-design-rear-valance-v-2-audi-rs3-8v-facelift-2017-splitters-skirts-diffusers-963.webp?v=1745132955"},{"product_id":"maxton-design-rear-diffuser-v-2-audi-rs3-8v-fl-sportback","title":"Maxton Design Rear Diffuser V.2 Audi RS3 8V FL Sportback","description":"\u003cp\u003e\u003cstrong\u003eRear Diffuser V.2 Audi RS3 8V FL Sportback\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003e\u003cu\u003e\u003cspan\u003e\u003cb\u003eFITS ONLY:\u003c\/b\u003e\u003c\/span\u003e\u003c\/u\u003e\u003cbr\u003eAudi RS3 8V FL Sportback (2017-)\u003c\/p\u003e \u003cp\u003e\u003cu\u003e\u003cspan\u003e\u003cb\u003eCOMPLETE SET CONTAINS:\u003c\/b\u003e\u003c\/span\u003e\u003c\/u\u003e\u003c\/p\u003e \u003cp\u003e\u003cspan\u003e §   Maxton Racing Rear Diffuser\u003c\/span\u003e\u003c\/p\u003e \u003cp\u003e\u003cspan\u003e §   Mounting kit\u003c\/span\u003e\u003c\/p\u003e \u003cp\u003e\u003cspan\u003e\u003cb\u003e\u003cu\u003eMaxton Racing properties include:\u003c\/u\u003e\u003c\/b\u003e\u003c\/span\u003e\u003c\/p\u003e \u003cp\u003e\u003cspan\u003e §   A more durable material; 10 mm thick ABS plastic.\u003c\/span\u003e\u003c\/p\u003e \u003cp\u003e\u003cspan\u003e §   Increased impact and scratch resistance.\u003c\/span\u003e\u003c\/p\u003e \u003cp\u003e\u003cspan\u003e §   New designs, providing a new unique style.\u003c\/span\u003e\u003c\/p\u003e \u003cp\u003e\u003cspan\u003e §   UV protective coating.\u003c\/span\u003e\u003c\/p\u003e \u003cp\u003e\u003cspan\u003e §   Temperature\/weather resistant.\u003c\/span\u003e\u003c\/p\u003e \u003cp\u003e\u003cspan\u003e §   Products arrive with protective film vacuum sealed to it.\u003c\/span\u003e\u003c\/p\u003e \u003cp\u003e\u003cspan\u003e §   No painting required.\u003c\/span\u003e\u003c\/p\u003e \u003cp\u003e\u003cspan\u003e §   Multiple finish options: 10 mm thick matte black, 10 mm thick matte black with a red core.\u003c\/span\u003e\u003c\/p\u003e \u003cp\u003e\u003cspan\u003e §   If you decide to paint the product, primer must be used first.\u003c\/span\u003e\u003c\/p\u003e \u003cp\u003e\u003cspan\u003e §  \u003c\/span\u003e\u003cspan\u003eParts are labelled confirming authenticity and quality of the product.\u003c\/span\u003e\u003c\/p\u003e \u003cp\u003e\u003cspan\u003eThis product has been TUV MATERIALGUTACHTEN certified (TUV certify for material).\u003c\/span\u003e\u003c\/p\u003e","brand":"Maxton Design","offers":[{"title":"Default Title","offer_id":47326418305320,"sku":"MXT-AU-RS3-8VF-CNC-RS2A","price":159.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/5767\/7352\/files\/maxton-design-rear-diffuser-v-2-audi-rs3-8v-fl-sportback-splitters-skirts-diffusers-671.webp?v=1745135369"},{"product_id":"maxton-design-rear-side-splitters-audi-s3-8v-sportback","title":"Maxton Design Rear Side Splitters Audi S3 8V Sportback","description":"\u003cp\u003e\u003cspan\u003eREAR SIDE SPLITTERS \u003cspan\u003e\u003cspan\u003eAUDI S3 SPORTBACK\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan\u003e\u003cspan\u003e\u003cu\u003eFits Only:\u003c\/u\u003e\u003c\/span\u003e\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan\u003eAudi S3 8V SPORTBACK \/ AUDI A3 8V Sline (5 doors) version (2013-2016)\u003c\/span\u003e\u003cbr\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan\u003e\u003cu\u003e\u003cspan\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/u\u003e\u003c\/span\u003e\u003cspan\u003e\u003cu\u003e\u003cspan\u003e\u003cbr\u003eCOMPLETE SET CONTAINS:\u003c\/span\u003e\u003c\/u\u003e\u003c\/span\u003e\u003cspan\u003e\u003cbr\u003e-\u0026gt; Rear Side Splitters (Left \u0026amp; right)\u003cbr\u003e\u003c\/span\u003e\u003ca\u003e-\u003c\/a\u003e\u0026gt; Fitting manual \/ Fitting kit\u003c\/p\u003e\u003cp\u003e\u003ca\u003ehttps:\/\/www.maxtondesign.co.uk\/pdf\/rear-side-splitters_fitting-manual-maxton.pdf\u003c\/a\u003e\u003cbr\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan\u003e\u003cspan\u003e\u003cspan\u003e\u003cbr\u003ePlease note, the majority of our products are made from ABS plastic, the flexibility of these products provides them the ability to withstand some pressure.\u003c\/span\u003e\u003c\/span\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan\u003e\u003cspan\u003e\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e\u003c\/span\u003e\u003cspan\u003eWe highly recommend installations are completed by a professional to ensure the product is fitted correctly and according to our fitting manuals.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e\u003cspan\u003eWe can only accept a return within 30 days of delivery, if the product is in its original condition including protective film still on. A refund will be processed excluding shipping costs.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e\u003c\/span\u003e\u003c\/span\u003e\u003cspan\u003eAll products arrive with a protective film, this is a very thin plastic vacuum sealed around the product to avoid the item sustaining any damage. Once removed you will notice the product does not have any scuffs or scratches.\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e","brand":"Maxton Design","offers":[{"title":"Gloss Black","offer_id":47326442553640,"sku":"MXT-AU-S3-3-RSD1G","price":79.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/5767\/7352\/files\/maxton-design-rear-side-splitters-audi-s3-8v-sportback-gloss-black-skirts-diffusers-605.webp?v=1745141024"}],"url":"https:\/\/www.tegiwa.com\/collections\/audi-rs3-8v-exhaust-systems-sports-cats-downpipes-sensors.oembed","provider":"Tegiwa","version":"1.0","type":"link"}