{"title":"AIM - Loggers \u0026 Displays","description":"","products":[{"product_id":"mxsl-8-channel-pdm-5-digital-dash-display","title":"MXSL 8 Channel PDM 5\" Digital Dash Display","description":"\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cp\u003eThe AIM MXsl Dash Display is an evolution of the hugely successful MXS Strada Dash Display, which is one of the most widely used racing dash displays used on tracks and streets all over the world.\u003c\/p\u003e\n\u003cp\u003eThe MXsl has a 5″ compact colour display which is configurable to show all the info coming from your Engine Control Unit (ECU), analogue \/ digital inputs, pre-defined math channels and the optional GPS Module.\u003c\/p\u003e\n\u003cp\u003eThe main addition to the Aim MXsl is the inbuilt power module. Offering 10 high power outputs that can be used to directly power components such as motors, lights, fans, pumps and other electrical devices without the need to use conventional relays and fuses.\u003c\/p\u003e\n\u003cp\u003eThe unit can also detect short circuits, over-currents and open circuits while recording them for later diagnosis. The error information can also be displayed on the dash if required. Each power output can also be configured to be activated by a combination of math channels, analogue\/digital inputs, pushbuttons or ECU fields.\u003c\/p\u003e\n\u003cp\u003eBesides the new power module capabilities, the Aim MXsl dash retains all of the well-proven data logging and dash display functions as found in the MXS Strada as detailed below.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHigh contrast TFT display\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Aim MXsl has a high contrast TFT display which features an optimised backlighting system by using an ambient light sensor. This helps to maintain the optimum brightness for reading the display in all light levels.\u003c\/p\u003e\n\u003cp\u003eAs with other AIM dash displays, the data which is shown on the screen can be configured to show the precise information that the driver needs the most.\u003c\/p\u003e\n\u003cp\u003eMultiple pages are also available to display further data and can be switched using the buttons on the dash or by wiring to a standalone button. Data which can be displayed include graphical dials for speed and RPM as well as vital engine parameters such as oil pressure\/temperature, water temperature, battery voltage and more.\u003c\/p\u003e\n\u003cp\u003eAt the top of the unit, there is a row of fully configurable shift lights which can be set according to the user's specific requirements including individual RPM thresholds for each gear and the colour of the LEDs\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cp\u003e\u003cstrong\u003eMonitor data in pre-configured pages\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Aim MXsl shows, together with the RPM scale, all the data you need, like speed, water temperature and oil pressure, lap times and much more… you can choose the custom pages you wish – including up to four additional fields – among a wide library of page styles, defining which data to be shown, their end of scale and measure units. Swapping between the pages is easy using the push buttons.\u003c\/p\u003e\n\u003cp\u003eFlexible shift lights and alarms: The ten multi-coloured RGB shift lights can be customised to your liking, defining the RPM threshold for every single gear.\u003c\/p\u003e\n\u003cp\u003eThe same flexibility applies to the configurable RGB alarm LEDs: you can configure them to turn them on\/off depending on analogue or digital inputs, ECU values, expansion values, math channels or – optionally – GPS information.\u003c\/p\u003e\n\u003cp\u003eYou choose conditions and colours: select a solid alarm or flashing one – and the flashing frequency. It is also possible to configure an accompanying text message and set the alarm priorities.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCAN output\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWith the CAN Output, you can send messages directly to an existing CAN network to improve the range of vehicle control possibilities.\u003c\/p\u003e\n\u003cp\u003eDigital output: MXsL features a 1 amp digital output configurable to be activated\/deactivated depending on the value of the analogue\/digital inputs or on impulses coming from the ECU. This allows you to automatically run external systems, i.e. to switch on\/off additional lights, to activate\/de-activate a cooling fan or circulation pumps etc when a certain event happens.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eA modular system:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eUsing the built-in CAN bus you can add optional expansion modules (listed below) to visualise additional info:\u003c\/p\u003e\n\u003cp\u003eGPS08 Module – Thanks to GPS08 Module and Race Studio 3 software, you can immediately get lap times and all data needed for engine tuning as well as for improving driving techniques.\u003c\/p\u003e\n\u003cp\u003eChannel Expansion – Add up to 4 0-5 Volt analogue channels.\u003c\/p\u003e\n\u003cp\u003eTC Hub – Add up to 4 K thermocouples.\u003c\/p\u003e\n\u003cp\u003eLCU-One Lambda Controller – Wide band Lambda controller LCU-One, with Bosch LSU 4.9 probe, providing all Air\/Fuel data, lambda value and exhaust gas temperature, allows to perfectly tune the carburetion.\u003c\/p\u003e\n\u003cp\u003eSmartyCam HD \/ GP HD – Compact and robust HD camera \/ HD Bullet-cam – both designed for motorsports.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"AIM","offers":[{"title":"Default Title","offer_id":47167450349864,"sku":"AIM-MXSL","price":1776.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/5767\/7352\/files\/mxsl-8-channel-pdm-5-digital-dash-display-displays-572.webp?v=1745069406"},{"product_id":"aim-pdm32-power-distribution-module-digital-display-bundle","title":"AIM PDM32 Power Distribution Module \u0026 Digital Display Bundle","description":"\u003cp\u003e\u003cstrong\u003ePDM32 Power Distribution Module is designed to distribute power to multiple circuits on your vehicle, easily replacing traditional fuse and relay systems.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eOur PDMs, housed in an anodized billet aluminum case, are designed to handle the rigors of motorsport and include a complete professional data logger and internal dash controller.\u003c\/p\u003e\n\u003cp\u003eAn AiM PDM at the center of vehicle electronics will greatly simplify your wiring harness and electronics installation while providing much more control.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePDM 32 offers some interesting features, like:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cem\u003eECU connection, for getting data from your ECU\u003c\/em\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cem\u003eDatalogging, for avoiding adding another logger to your car\u003c\/em\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cem\u003eDatalogging, for avoiding adding another logger to your car\u003c\/em\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cem\u003eDisplay controller, for easily managing a 6” or 10” display\u003c\/em\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cem\u003eMirror camera, for easily getting a back view while you drive your car in reverse in the paddock\u003c\/em\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eThe PDM Kit includes:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eNew INTEGRATED Power Distribution Module\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003e4 gigabytes Datalogger\u003c\/li\u003e\n\u003cli\u003eDash controller\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cli\u003eDash 6” or 10”\u003c\/li\u003e\n\u003cli\u003eGPS Module for automatic Lap Time and track position\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003ePDM32 with 28 High Side Outputs and 4 Half Bridge Outputs\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThe PDMs offer four different Power Outputs Levels:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e4 High Power Channels: Continuous current 20A\u003c\/li\u003e\n\u003cli\u003e12 Medium Power Channels: Continuous current 15A\u003c\/li\u003e\n\u003cli\u003e12 Low Power Channels: Continuous current 10A\u003c\/li\u003e\n\u003cli\u003e4 Half Bridge Channels: up to 35 A (high side\/half bridge\/low side\/configurable PWM at max 10 KHz)\u003c\/li\u003e\n\u003cli\u003eTotal continuous max current of 120 Amps\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eEach output provides status feedback for open circuit, short circuit, high temperature, over current, under voltage, and over voltage. Inrush current, number of fault retries, and the time between retries are all definable.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAll the outputs may be configurable as PWM and allow soft start\/stop.\u003c\/li\u003e\n\u003cli\u003eFor every output, a multicolor LED shows the status:\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003eEnabled\/Disabled\u003c\/li\u003e\n\u003cli\u003eActivated or not\u003c\/li\u003e\n\u003cli\u003eFault\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSpecial Functions\u003c\/strong\u003e\u003cbr\u003eSome \"black boxes\" are available for simplifying the configuration.\u003cbr\u003eFor example, the Wiper may be managed by the LIN connection, or using the Half Bridges.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eData Logger\u003c\/strong\u003e\u003cbr\u003eAn internal datalogger is available, capable of recording all the analog inputs, digital inputs, ECU channels, GPS values, Currents, status of all the Power Outputs. Here an example of what the recorded data may show, during engine cranking.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eImportant note: These PDMs do not come with a harness. The customer is responsible for either making one or contracting Trailbrake to have one manufactured for them in addition to the PDM.\u003c\/strong\u003e\u003c\/p\u003e","brand":"AIM","offers":[{"title":"5\" \/ Race \/ 0.5M GPS","offer_id":47167450513704,"sku":"AIM-PDM-32-5","price":2262.0,"currency_code":"GBP","in_stock":true},{"title":"5\" \/ Race \/ 1.3M GPS","offer_id":47167450546472,"sku":"AIM-PDM-32-5-1","price":2262.0,"currency_code":"GBP","in_stock":true},{"title":"5\" \/ Race \/ 2M GPS","offer_id":47167450579240,"sku":"AIM-PDM-32-5-2","price":2262.0,"currency_code":"GBP","in_stock":true},{"title":"5\" \/ Race \/ 4M Stick GPS","offer_id":47167450612008,"sku":"AIM-PDM-32-5-4","price":2262.0,"currency_code":"GBP","in_stock":true},{"title":"5\" \/ Race \/ 2M Roof Mounted GPS","offer_id":47167450644776,"sku":"AIM-PDM-32-5-CR2","price":2262.0,"currency_code":"GBP","in_stock":true},{"title":"5\" \/ Race \/ 4M Roof Mounted GPS","offer_id":47167450677544,"sku":"AIM-PDM-32-5-CR4","price":2262.0,"currency_code":"GBP","in_stock":true},{"title":"5\" \/ Road \/ 0.5M GPS","offer_id":47167450710312,"sku":"AIM-PDM-32-5-I","price":2262.0,"currency_code":"GBP","in_stock":true},{"title":"5\" \/ Road \/ 1.3M GPS","offer_id":47167450743080,"sku":"AIM-PDM-32-5-I-1","price":2262.0,"currency_code":"GBP","in_stock":true},{"title":"5\" \/ Road \/ 2M GPS","offer_id":47167450775848,"sku":"AIM-PDM-32-5-I-2","price":2262.0,"currency_code":"GBP","in_stock":true},{"title":"5\" \/ Road \/ 4M Stick GPS","offer_id":47167450808616,"sku":"AIM-PDM 32-5-I-4","price":2262.0,"currency_code":"GBP","in_stock":true},{"title":"5\" \/ Road \/ 2M Roof Mounted GPS","offer_id":47167450841384,"sku":"AIM-PDM 32-5-I-CR2","price":2262.0,"currency_code":"GBP","in_stock":true},{"title":"5\" \/ Road \/ 4M Roof Mounted GPS","offer_id":47167450874152,"sku":"AIM-PDM 32-5-I-CR4","price":2262.0,"currency_code":"GBP","in_stock":true},{"title":"6\" \/ Race \/ 0.5M GPS","offer_id":47167450906920,"sku":"AIM-PDM-32-6","price":2520.0,"currency_code":"GBP","in_stock":true},{"title":"6\" \/ Race \/ 1.3M GPS","offer_id":47167450939688,"sku":"AIM-PDM-32-6-1","price":2520.0,"currency_code":"GBP","in_stock":true},{"title":"6\" \/ Race \/ 2M GPS","offer_id":47167450972456,"sku":"AIM-PDM-32-6-2","price":2520.0,"currency_code":"GBP","in_stock":true},{"title":"6\" \/ Race \/ 4M Stick GPS","offer_id":47167451037992,"sku":"AIM-PDM-32-6-4","price":2520.0,"currency_code":"GBP","in_stock":true},{"title":"6\" \/ Race \/ 2M Roof Mounted GPS","offer_id":47167451070760,"sku":"AIM-PDM-32-6-CR2","price":2520.0,"currency_code":"GBP","in_stock":true},{"title":"6\" \/ Race \/ 4M Roof Mounted GPS","offer_id":47167451103528,"sku":"AIM-PDM-32-6-CR4","price":2520.0,"currency_code":"GBP","in_stock":true},{"title":"6\" \/ Road \/ 0.5M GPS","offer_id":47167451136296,"sku":"AIM-PDM-32-6-I","price":2520.0,"currency_code":"GBP","in_stock":true},{"title":"6\" \/ Road \/ 1.3M GPS","offer_id":47167451169064,"sku":"AIM-PDM-32-6-I-1","price":2520.0,"currency_code":"GBP","in_stock":true},{"title":"6\" \/ Road \/ 2M GPS","offer_id":47167451201832,"sku":"AIM-PDM-32-6-I-2","price":2520.0,"currency_code":"GBP","in_stock":true},{"title":"6\" \/ Road \/ 4M Stick GPS","offer_id":47167451234600,"sku":"AIM-PDM 32-6-I-4","price":2520.0,"currency_code":"GBP","in_stock":true},{"title":"6\" \/ Road \/ 2M Roof Mounted GPS","offer_id":47167451267368,"sku":"AIM-PDM 32-6-I-CR2","price":2520.0,"currency_code":"GBP","in_stock":true},{"title":"6\" \/ Road \/ 4M Roof Mounted GPS","offer_id":47167451300136,"sku":"AIM-PDM 32-6-I-CR4","price":2520.0,"currency_code":"GBP","in_stock":true},{"title":"10\" \/ Race \/ 0.5M GPS","offer_id":47167451332904,"sku":"AIM-PDM-32-10","price":2778.0,"currency_code":"GBP","in_stock":true},{"title":"10\" \/ Race \/ 1.3M GPS","offer_id":47167451365672,"sku":"AIM-PDM-32-10-1","price":2778.0,"currency_code":"GBP","in_stock":true},{"title":"10\" \/ Race \/ 2M GPS","offer_id":47167451398440,"sku":"AIM-PDM-32-10-2","price":2778.0,"currency_code":"GBP","in_stock":true},{"title":"10\" \/ Race \/ 4M Stick GPS","offer_id":47167451431208,"sku":"AIM-PDM-32-10-4","price":2778.0,"currency_code":"GBP","in_stock":true},{"title":"10\" \/ Race \/ 2M Roof Mounted GPS","offer_id":47167451463976,"sku":"AIM-PDM-32-10-CR2","price":2778.0,"currency_code":"GBP","in_stock":true},{"title":"10\" \/ Race \/ 4M Roof Mounted GPS","offer_id":47167451496744,"sku":"AIM-PDM-32-10-CR4","price":2778.0,"currency_code":"GBP","in_stock":true},{"title":"10\" \/ Road \/ 0.5M GPS","offer_id":47167451529512,"sku":"AIM-PDM-32-10-I","price":2778.0,"currency_code":"GBP","in_stock":true},{"title":"10\" \/ Road \/ 1.3M GPS","offer_id":47167451562280,"sku":"AIM-PDM-32-10-I-1","price":2778.0,"currency_code":"GBP","in_stock":true},{"title":"10\" \/ Road \/ 2M GPS","offer_id":47167451595048,"sku":"AIM-PDM-32-10-I-2","price":2778.0,"currency_code":"GBP","in_stock":true},{"title":"10\" \/ Road \/ 4M Stick GPS","offer_id":47167451627816,"sku":"AIM-PDM-32-10-I-4","price":2778.0,"currency_code":"GBP","in_stock":true},{"title":"10\" \/ Road \/ 2M Roof Mounted GPS","offer_id":47167451660584,"sku":"AIM-PDM-32-10-I-CR2","price":2778.0,"currency_code":"GBP","in_stock":true},{"title":"10\" \/ Road \/ 4M Roof Mounted GPS","offer_id":47167451693352,"sku":"AIM-PDM-32-10-I-CR4","price":2778.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/5767\/7352\/files\/aim-pdm32-power-distribution-module-digital-display-bundle-5-race-0-5m-gps-displays-307.webp?v=1745034456"},{"product_id":"aim-pdm8-power-distribution-module-digital-display-bundle","title":"AIM PDM8 Power Distribution Module \u0026 Digital Display Bundle","description":"\u003cp\u003e\u003cstrong\u003ePDM8 Power Distribution Module is designed to distribute power to multiple circuits on your vehicle, easily replacing traditional fuse and relay systems.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eOur PDMs, housed in an anodized billet aluminum case, are designed to handle the rigors of motorsport and include a complete professional data logger and internal dash controller.\u003c\/p\u003e\n\u003cp\u003eAn AiM PDM at the center of vehicle electronics will greatly simplify your wiring harness and electronics installation while providing much more control.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePDM 8 offers some interesting features, like:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cem\u003eECU connection, for getting data from your ECU\u003c\/em\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cem\u003eDatalogging, for avoiding adding another logger to your car\u003c\/em\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cem\u003eDisplay controller, for easily managing a 6” or 10” display\u003c\/em\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cem\u003eMirror camera, for easily getting a back view while you drive your car in reverse in the paddock\u003c\/em\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eThe PDM Kit includes:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eNew INTEGRATED Power Distribution Module\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003e4 gigabytes Datalogger\u003c\/li\u003e\n\u003cli\u003eDash controller\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cli\u003eDash 6” or 10”\u003c\/li\u003e\n\u003cli\u003eGPS Module for automatic Lap Time and track position\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003ePDM8 with 8 Medium Power Outputs of 20 Amps each.\u003c\/p\u003e\n\u003cp\u003eEach output provides status feedback for open circuit, short circuit, high temperature, over current, under voltage, and over voltage. Inrush current, number of fault retries, and the time between retries are all definable.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAll the outputs may be configurable as PWM and allow soft start\/stop.\u003c\/li\u003e\n\u003cli\u003eFor every output, a multicolor LED shows the status:\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003eEnabled\/Disabled\u003c\/li\u003e\n\u003cli\u003eActivated or not\u003c\/li\u003e\n\u003cli\u003eFault\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003cp\u003eData Logger\u003c\/p\u003e\n\u003cp\u003eAn internal datalogger is available, capable of recording all the analog inputs, digital inputs, ECU channels, GPS values, Currents, status of all the Power Outputs. Here an example of what the recorded data may show, during engine cranking.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eImportant note: These PDMs do not come with a harness. The customer is responsible for either making one or contracting Trailbrake to have one manufactured for them in addition to the PDM.\u003c\/strong\u003e\u003c\/p\u003e","brand":"AIM","offers":[{"title":"5\" \/ Race \/ 0.5M GPS","offer_id":47167452414248,"sku":"AIM-PDM-8-5","price":1752.0,"currency_code":"GBP","in_stock":true},{"title":"5\" \/ Race \/ 1.3M GPS","offer_id":47167452479784,"sku":"AIM-PDM-8-5-1","price":1752.0,"currency_code":"GBP","in_stock":true},{"title":"5\" \/ Race \/ 2M GPS","offer_id":47167452545320,"sku":"AIM-PDM-8-5-2","price":1752.0,"currency_code":"GBP","in_stock":true},{"title":"5\" \/ Race \/ 4M Stick GPS","offer_id":47167452578088,"sku":"AIM-PDM-8-5-4","price":1752.0,"currency_code":"GBP","in_stock":true},{"title":"5\" \/ Race \/ 2M Roof Mounted GPS","offer_id":47167452610856,"sku":"AIM-PDM-8-5-CR2","price":1752.0,"currency_code":"GBP","in_stock":true},{"title":"5\" \/ Race \/ 4M Roof Mounted GPS","offer_id":47167452643624,"sku":"AIM-PDM-8-5-CR4","price":1752.0,"currency_code":"GBP","in_stock":true},{"title":"5\" \/ Road \/ 0.5M GPS","offer_id":47167452676392,"sku":"AIM-PDM-8-5-I","price":1752.0,"currency_code":"GBP","in_stock":true},{"title":"5\" \/ Road \/ 1.3M GPS","offer_id":47167452709160,"sku":"AIM-PDM-8-5-I-1","price":1752.0,"currency_code":"GBP","in_stock":true},{"title":"5\" \/ Road \/ 2M GPS","offer_id":47167452741928,"sku":"AIM-PDM-8-5-I-2","price":1752.0,"currency_code":"GBP","in_stock":true},{"title":"5\" \/ Road \/ 4M Stick GPS","offer_id":47167452774696,"sku":"AIM-PDM 8-5-I-4","price":1752.0,"currency_code":"GBP","in_stock":true},{"title":"5\" \/ Road \/ 2M Roof Mounted GPS","offer_id":47167452807464,"sku":"AIM-PDM 8-5-I-CR2","price":1752.0,"currency_code":"GBP","in_stock":true},{"title":"5\" \/ Road \/ 4M Roof Mounted GPS","offer_id":47167452840232,"sku":"AIM-PDM 8-5-I-CR4","price":1752.0,"currency_code":"GBP","in_stock":true},{"title":"6\" \/ Race \/ 0.5M GPS","offer_id":47167452873000,"sku":"AIM-PDM-8-6","price":2004.0,"currency_code":"GBP","in_stock":true},{"title":"6\" \/ Race \/ 1.3M GPS","offer_id":47167452905768,"sku":"AIM-PDM-8-6-1","price":2004.0,"currency_code":"GBP","in_stock":true},{"title":"6\" \/ Race \/ 2M GPS","offer_id":47167452938536,"sku":"AIM-PDM-8-6-2","price":2004.0,"currency_code":"GBP","in_stock":true},{"title":"6\" \/ Race \/ 4M Stick GPS","offer_id":47167452971304,"sku":"AIM-PDM-8-6-4","price":2004.0,"currency_code":"GBP","in_stock":true},{"title":"6\" \/ Race \/ 2M Roof Mounted GPS","offer_id":47167453004072,"sku":"AIM-PDM-8-6-CR2","price":2004.0,"currency_code":"GBP","in_stock":true},{"title":"6\" \/ Race \/ 4M Roof Mounted GPS","offer_id":47167453036840,"sku":"AIM-PDM-8-6-CR4","price":2004.0,"currency_code":"GBP","in_stock":true},{"title":"6\" \/ Road \/ 0.5M GPS","offer_id":47167453069608,"sku":"AIM-PDM-8-6-I","price":2004.0,"currency_code":"GBP","in_stock":true},{"title":"6\" \/ Road \/ 1.3M GPS","offer_id":47167453102376,"sku":"AIM-PDM-8-6-I-1","price":2004.0,"currency_code":"GBP","in_stock":true},{"title":"6\" \/ Road \/ 2M GPS","offer_id":47167453135144,"sku":"AIM-PDM-8-6-I-2","price":2004.0,"currency_code":"GBP","in_stock":true},{"title":"6\" \/ Road \/ 4M Stick GPS","offer_id":47167453167912,"sku":"AIM-PDM 8-6-I-4","price":2004.0,"currency_code":"GBP","in_stock":true},{"title":"6\" \/ Road \/ 2M Roof Mounted GPS","offer_id":47167453200680,"sku":"AIM-PDM 8-6-I-CR2","price":2004.0,"currency_code":"GBP","in_stock":true},{"title":"6\" \/ Road \/ 4M Roof Mounted GPS","offer_id":47167453233448,"sku":"AIM-PDM 8-6-I-CR4","price":2004.0,"currency_code":"GBP","in_stock":true},{"title":"10\" \/ Race \/ 0.5M GPS","offer_id":47167453266216,"sku":"AIM-PDM-8-10","price":2262.0,"currency_code":"GBP","in_stock":true},{"title":"10\" \/ Race \/ 1.3M GPS","offer_id":47167453298984,"sku":"AIM-PDM-8-10-1","price":2262.0,"currency_code":"GBP","in_stock":true},{"title":"10\" \/ Race \/ 2M GPS","offer_id":47167453331752,"sku":"AIM-PDM-8-10-2","price":2262.0,"currency_code":"GBP","in_stock":true},{"title":"10\" \/ Race \/ 4M Stick GPS","offer_id":47167453364520,"sku":"AIM-PDM-8-10-4","price":2262.0,"currency_code":"GBP","in_stock":true},{"title":"10\" \/ Race \/ 2M Roof Mounted GPS","offer_id":47167453397288,"sku":"AIM-PDM-8-10-CR2","price":2262.0,"currency_code":"GBP","in_stock":true},{"title":"10\" \/ Race \/ 4M Roof Mounted GPS","offer_id":47167453430056,"sku":"AIM-PDM-8-10-CR4","price":2262.0,"currency_code":"GBP","in_stock":true},{"title":"10\" \/ Road \/ 0.5M GPS","offer_id":47167453462824,"sku":"AIM-PDM-8-10-I","price":2262.0,"currency_code":"GBP","in_stock":true},{"title":"10\" \/ Road \/ 1.3M GPS","offer_id":47167453495592,"sku":"AIM-PDM-8-10-I-1","price":2262.0,"currency_code":"GBP","in_stock":true},{"title":"10\" \/ Road \/ 2M GPS","offer_id":47167453528360,"sku":"AIM-PDM-8-10-I-2","price":2262.0,"currency_code":"GBP","in_stock":true},{"title":"10\" \/ Road \/ 4M Stick GPS","offer_id":47167453561128,"sku":"AIM-PDM-8-10-I-4","price":2262.0,"currency_code":"GBP","in_stock":true},{"title":"10\" \/ Road \/ 2M Roof Mounted GPS","offer_id":47167453593896,"sku":"AIM-PDM-8-10-I-CR2","price":2262.0,"currency_code":"GBP","in_stock":true},{"title":"10\" \/ Road \/ 4M Roof Mounted GPS","offer_id":47167453659432,"sku":"AIM-PDM-8-10-I-CR4","price":2262.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/5767\/7352\/files\/aim-pdm8-power-distribution-module-digital-display-bundle-5-race-0-5m-gps-displays-557.webp?v=1745034501"},{"product_id":"aim-pdm32-pdm8-digital-dash-display","title":"AIM PDM32 PDM8 Digital Dash Display","description":"\u003cp\u003eThis dash display is suitable as a replacement unit for those supplied with the AIM Motorsport PDM kits or as an upgrade for PDM kits which do not include a dash display. There are 2 display type options, one with race icons and one with IVA complaint street icons.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDesigned for use with the AIM Motorsport PDM kits\u003c\/li\u003e\n\u003cli\u003eRace or street icon versions\u003c\/li\u003e\n\u003cli\u003eUser configurable display with many layout options\u003c\/li\u003e\n\u003cli\u003eReplaces all dashboard gauges and warning lights in one unit\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003ePlease note - the dash display is ONLY for use with AIM Motorsport PDM kits and can not be used as a stand alone dash display.\u003c\/p\u003e","brand":"AIM","offers":[{"title":"5\" \/ Race","offer_id":47167454904616,"sku":"AIM-DISPLAY-5","price":354.0,"currency_code":"GBP","in_stock":true},{"title":"6\" \/ Race","offer_id":47167454937384,"sku":"AIM-DISPLAY-6","price":408.0,"currency_code":"GBP","in_stock":true},{"title":"10\" \/ Race","offer_id":47167454970152,"sku":"AIM-DISPLAY-10","price":666.0,"currency_code":"GBP","in_stock":true},{"title":"5\" \/ Road","offer_id":47167455002920,"sku":"AIM-DISPLAY-5-I","price":354.0,"currency_code":"GBP","in_stock":true},{"title":"6\" \/ Road","offer_id":47167455035688,"sku":"AIM-DISPLAY-6-I","price":408.0,"currency_code":"GBP","in_stock":true},{"title":"10\" \/ Road","offer_id":47167455068456,"sku":"AIM-DISPLAY-10-I","price":666.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/5767\/7352\/files\/aim-pdm32-pdm8-digital-dash-display-5-race-displays-879.webp?v=1745035000"},{"product_id":"aim-remote-button-can-interface-standard-keypad","title":"AIM Remote Button CAN Interface Standard Keypad","description":"\u003cp\u003eThe remote button interface keypads will enable you to have your very own selected buttons at your fingertips.\u003c\/p\u003e\n\u003ch4\u003eKey Features :\u003c\/h4\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eConfigurable channels\u003c\/td\u003e\n\u003ctd\u003eMulticolour indicator rings\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCAN bus compatible keypad\u003c\/td\u003e\n\u003ctd\u003eLED status configurable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLED-backlit icons\u003c\/td\u003e\n\u003ctd\u003eVertical or horizontal mount\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eCAN Interface Keypad\u003c\/h3\u003e\n\u003cp\u003eThe AiM remote button CAN interface keypads will enable you to have your very own selected buttons at your fingertips. The keypads have been built to the highest standards for the harshest motorsport conditions. The keypad can withstand the cleaning of pressure washers and holds an IP67 rating, making them immune to water, mud, soil, sand, oil, chemicals.\u003cbr\u003e\u003cbr\u003eThe keypads are available in 8, 12 button configurations.\u003c\/p\u003e\n\u003ch3\u003ePlease Note:\u003c\/h3\u003e\n\u003cp\u003eThe keypads come blank with no inserts. We have an extensive range available. See the optional extras at the top of the page. Also, the lights on the keypads are for visual effect to show you how the keypad could look.\u003c\/p\u003e","brand":"AIM","offers":[{"title":"8 Button","offer_id":47167456674088,"sku":"AIM-RBI-B8-ST","price":324.0,"currency_code":"GBP","in_stock":true},{"title":"12 Button","offer_id":47167456706856,"sku":"AIM-RBI-B12-ST","price":336.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/5767\/7352\/files\/aim-remote-button-can-interface-standard-keypad-8-digital-displays-754.webp?v=1745035068"},{"product_id":"aim-remote-button-can-interface-pro-keypad","title":"AIM Remote Button CAN Interface Pro Keypad","description":"\u003cp\u003e\u003cstrong\u003e*Please be aware that our PRO Keypads will require a more complex configuration than our Standard CAN Keypads but will add more customisability and features. If you would like to use the easy configuration method built into Race Studio 3, you must buy our Standard CAN Keypad.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe remote button interface keypads will enable you to have your very own selected buttons at your fingertips. Available in 4, 6, 8,10,12 and 15 key keypads.\u003c\/p\u003e\n\u003ch4\u003eKey Features :\u003c\/h4\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eConfigurable channels\u003c\/td\u003e\n\u003ctd\u003eMulticolour indicator rings\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCAN bus compatible keypad\u003c\/td\u003e\n\u003ctd\u003eLED status configurable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLED-backlit icons\u003c\/td\u003e\n\u003ctd\u003eVertical or horizontal mount\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eCAN Interface Keypad\u003c\/h3\u003e\n\u003cp\u003eThe AiM remote button CAN interface keypads will enable you to have your very own selected buttons at your fingertips. The keypads are designed to a high standard to the highest standards for the harshest motorsport conditions. The keypad can withstand the cleaning of pressure washers and holds an IP67 rating, making them immune to water, mud, soil, sand, oil, chemicals.\u003cbr\u003e\u003cbr\u003eThe Pro keypads are available in 4, 6, 8, 10, 12 \u0026amp; 15 button configurations.\u003c\/p\u003e\n\u003ch3\u003ePlease Note:\u003c\/h3\u003e\n\u003cp\u003eThe keypads come blank with no inserts. We have an extensive range available; see the optional extras at the top of the page. Also, the lights on the keypads are for visual effect to show you how the keypad could look.\u003c\/p\u003e","brand":"AIM","offers":[{"title":"4 Button","offer_id":47167456805160,"sku":"AIM-RBI-B4-PRO","price":288.0,"currency_code":"GBP","in_stock":true},{"title":"6 Button","offer_id":47167456837928,"sku":"AIM-RBI-B6-PRO","price":306.0,"currency_code":"GBP","in_stock":true},{"title":"8 Button","offer_id":47167456870696,"sku":"AIM-RBI-B8-PRO","price":324.0,"currency_code":"GBP","in_stock":true},{"title":"10 Button","offer_id":47167456903464,"sku":"AIM-RBI-B10-PRO","price":330.0,"currency_code":"GBP","in_stock":true},{"title":"12 Button","offer_id":47167456936232,"sku":"AIM-RBI-B12-PRO","price":336.0,"currency_code":"GBP","in_stock":true},{"title":"15 Button","offer_id":47167456969000,"sku":"AIM-RBI-B15-PRO","price":354.0,"currency_code":"GBP","in_stock":true},{"title":"15 Button With Two Rotary Encoders","offer_id":47167457001768,"sku":"AIM-RBI-B15-PRO-R","price":516.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/5767\/7352\/files\/aim-remote-button-can-interface-pro-keypad-4-digital-displays-864.webp?v=1745035040"},{"product_id":"aim-gs-digital-dash-display","title":"AIM GS Digital Dash Display","description":"\u003cp\u003eThe AIM Motorsport GS-Dash is a compact, flexible and fully configurable graphical display, showing data sampled by the new generation data loggers, EVO4S and EVO5. Its small dimension makes it particularly suitable for small cockpit installation (i.e. Formula cars, kit cars and motorbikes). Manufactured completely in aluminium, with edge-to-edge glass and metallic pushbuttons, GS-Dash is robust and fully waterproof to IP67 standards.\u003c\/p\u003e\n\u003cp\u003eWith GS-Dash you keep constantly under control with lap times and all values coming from your vehicle's ECU, from the three-axial accelerometer and from the GPS built into the EVO4S \/ EVO5 data logger.\u003c\/p\u003e\n\u003cp\u003eTo maximise readability of data, you need plenty of room. That is why the GS-Dash features a wide 268x128 pixel graphical display. The screen can be backlighted in one of the seven available colours. The incorporated light sensor makes brightness and contrast ideal in all light conditions.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThe GS-Dash swaps among pages showing lap times and data in a 100% customisable way: just choose your data and create your pages displaying up to 8 fields on each. The \"RPM and Lap Time\" page layout is also available to display RPM Graph, Lap Time and two channels of your choice.\u003c\/li\u003e\n\u003cli\u003eLap times. You can visualize the rolling time, or static or predictive lap time (as an absolute value or as a difference vs. the Best Lap).\u003c\/li\u003e\n\u003cli\u003eFive RGB shift lights can be individually configured for each gear, choosing LED colour and RPM threshold values for their activation.\u003c\/li\u003e\n\u003cli\u003eAlarms are managed in a very flexible way: you can choose the situation that generates the alarm, the LED behaviour (blinking frequency and colour) when the alarm appears and the conditions for its switch-off. A warning message can also be shown.\u003c\/li\u003e\n\u003cli\u003eA key-data summary is available at the end of each session: the three best laps of the session with their times, min\/max speed and min\/max RPMs. On the following pages you can also see a list of all the laps of the session.\u003c\/li\u003e\n\u003cli\u003eConfiguration of shift lights, alarms and customised data pages is intuitive and immediate using the dedicated and included Race Studio 3 software with just a few keyboard clicks.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePlease note: This is a display only, and MUST be connected to one of the following; EVO4S data logger or EVO5 data logger.\u003c\/strong\u003e\u003c\/p\u003e","brand":"AIM","offers":[{"title":"Default Title","offer_id":47167461294376,"sku":"GS-DASH","price":544.8,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/5767\/7352\/files\/aim-gs-digital-dash-display-displays-977.webp?v=1745034845"},{"product_id":"aim-mxs-strada-1-2-iva-compliant-plug-play-digital-dash-display","title":"AIM MXS Strada 1.2 IVA Compliant Plug \u0026 Play Digital Dash Display","description":"\u003cp\u003eThe AIM Motorsport MXS 1.3 Strada IVA Compliant Dash Kit (5” Colour TFT Display) is the evolution of the hugely successful MXL Strada dash display, one of the most widely used dashes on tracks and streets all over the world. The MXS 1.3 Strada dash has a 5\" colour TFT display with great visual impact, configurable to show all the info coming from the Engine Control Unit (ECU), analogue \/ digital inputs, pre-defined math channels and the optional GPS Module.\u003c\/p\u003e\n\u003cp\u003eConnecting the MXS 1.3 Strada dash to your ECU is very simple. Sample and display dozens of channels straight from the vehicle’s ECU. This is often the quickest and easiest setup, needing only 2 cable connections to the ECU instead of multiple connections to analogue sensors. As well as the standard 14 pin wiring loom, this kit comes with an additional 23 pin loom which has pre-configured connections for all the relevant electrical items of your vehicle such as oil temperature, engine temperature, fuel level, side lights, hazards, front and rear fog, handbrake, main beam, dipped beam and left and right hand indicator. A speed sensor is also included, for connecting to this additional loom.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHigh Contrast TFT Display: The MXS 1.3 Strada has a 5\" wide high contrast TFT display: its visual quality being always optimised as its ambient light sensor keeps the backlight at the best brightness levels.\u003c\/li\u003e\n\u003cli\u003eMonitor data in pre-configured pages: MXS 1.3 Strada shows, together with RPM scale, all the data you need, like speed, water temperature and oil pressure, lap times and much more... you can choose the custom pages you wish - including up to four additional fields - among a wide library of page styles, defining which data to be shown, their end of scale and measure units. Swapping between the pages is easy using the push buttons.\u003c\/li\u003e\n\u003cli\u003eFlexible shift lights and alarms: The ten multi-coloured RGB shift lights can be customised to your liking, defining the RPM threshold for each single gear. The same flexibility applies to the configurable RGB alarm LEDs: you can configure them in order to turn them on\/off depending on analogue or digital inputs, ECU values, expansion values, math channels or - optionally - GPS information. You choose conditions and colours: select a solid alarm or flashing one - and the flashing frequency. It is also possible to configure an accompanying text message, and set the alarm priorities.\u003c\/li\u003e\n\u003cli\u003eCAN output: With the CAN Output you can send messages directly to an existing CAN network in order to improve the range of vehicle control possibilities.\u003c\/li\u003e\n\u003cli\u003eDigital output: MXS 1.3 Strada features a 1 amp digital output configurable in order to be activated\/deactivated depending on the value of the analogue\/digital inputs or on impulses coming from the ECU. This allows you to automatically run external systems, i.e. to switch on\/off additional lights, to activate\/de-activate a cooling fan or circulation pumps etc when a certain event happens.\u003c\/li\u003e\n\u003cli\u003eCamera inputs: Two analog camera inputs are available, to switch your display into a mirror camera, through pushbutton command or event management. Extremely useful in cars such as a Lotus Exige where the rear visibility is poor.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eAvailable with a choice of ECU CONNECTION. These being either OBDII \/ K-Line or CAN, depending on whether you want to connect to the vehicles ECU using the OBDII port, or directly to the ECU through the CAN channel.\u003c\/p\u003e","brand":"AIM","offers":[{"title":"OBDII Loom","offer_id":47167461425448,"sku":"AIM-MXS-IVA-OBD","price":1458.0,"currency_code":"GBP","in_stock":true},{"title":"CAN ECU Loom","offer_id":47167461458216,"sku":"AIM-MXS-IVA-CAN","price":1458.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/5767\/7352\/files\/aim-mxs-strada-1-2-iva-compliant-plug-play-digital-dash-display-obdii-loom-displays-917.webp?v=1745034966"},{"product_id":"aim-mxp-strada-1-2-iva-compliant-plug-play-digital-dash-display","title":"AIM MXP Strada 1.2 IVA Compliant Plug \u0026 Play Digital Dash Display","description":"\u003cp\u003eThe AIM Motorsport MXP 1.3 Strada IVA Compliant Dash Kit (6” Colour TFT Display) with great visual impact, configurable to show all the data coming from the vehicles Engine Control Unit (ECU), 8 analogue inputs, 6 digital inputs, pre-defined math channels, a second CAN and an optional GPS Module. The 6\" MXP 1.3 Strada offers 50% more display area than the 5\" MXS Strada display, in a similar dimension package making this dash suitable for both cars and motorcycles.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHigh Contrast TFT Display: The MXP 1.3 Strada has a high contrast 6\" TFT display: its visual quality being always optimised as its ambient light sensor keeps the backlight at the best brightness levels, avoiding the screen from dazzling you when it gets dark, whilst keeping it bright and visible during the day.\u003c\/li\u003e\n\u003cli\u003eFlexible shift lights and alarms: The 10 multi-coloured RGB shift lights can be customised to your liking, defining the RPM threshold for each single gear. The same flexibility applies to the configurable RGB alarm LEDs: you can configure them in order to turn them on\/off depending on analogue or digital inputs, ECU values, expansion values, math channels or - optionally - GPS information. You choose conditions and colours: select a solid alarm or flashing one - and the flashing frequency. It is also possible to configure an accompanying text message on the display, and set the alarm priorities.\u003c\/li\u003e\n\u003cli\u003eCAN output: With the CAN Output you can send messages directly to an existing CAN network in order to improve the range of vehicle control possibilities.\u003c\/li\u003e\n\u003cli\u003eDigital output: MXP 1.3 Strada features two digital outputs. These LOW SIDE type (switch to ground): can be configured in order to be activated\/deactivated depending on the value of the analogue\/digital inputs. This allows you to automatically run external systems, i.e. to switch on\/off additional lights or to activate\/de-activate a cooling fan or circulation pumps etc when a certain event happens.\u003c\/li\u003e\n\u003cli\u003eCamera inputs: Two analog camera inputs are available, to switch your display into a mirror camera, through push button command or event management. Extremely useful in cars such as a Lotus Exige where the rear visibility is poor.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eConnecting the MXP Strada IVA dash to your car\/motorcycle ECU is very simple. Sample and display dozens of channels straight from the vehicle’s ECU. This is often the quickest and easiest setup, needing only 2 cable connections to the ECU instead of multiple connections to analogue sensors. As well as the standard 14 pin wiring loom, this kit comes with an additional 23 pin loom which has pre-configured connections for all the relevant electrical items of your vehicle such as oil temperature, engine temperature, fuel level, side lights, hazards, front and rear fog, handbrake, main beam, dipped beam and left and right hand indicator. A speed sensor is also included, for connecting to this additional loom.\u003c\/p\u003e\n\u003cp\u003eAvailable with a choice of ECU CONNECTION. These being either OBDII \/ K-Line or CAN, depending on whether you want to connect to the vehicles ECU using the OBDII port, or directly to the ECU through the CAN channel.\u003c\/p\u003e","brand":"AIM","offers":[{"title":"OBDII Loom","offer_id":47167462048040,"sku":"AIM-MXP-IVA-OBD","price":1542.0,"currency_code":"GBP","in_stock":true},{"title":"CAN ECU Loom","offer_id":47167462080808,"sku":"AIM-MXP-IVA-CAN","price":1542.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/5767\/7352\/files\/aim-mxp-strada-1-2-iva-compliant-plug-play-digital-dash-display-obdii-loom-displays-762.webp?v=1745034316"},{"product_id":"aim-mxg-strada-1-2-iva-compliant-plug-play-digital-dash-display","title":"AIM MXG Strada 1.2 IVA Compliant Plug \u0026 Play Digital Dash Display","description":"\u003cp\u003eThe AIM Motorsport MXG 1.3 Strada IVA Compliant Dash Kit (7” Colour TFT Display) is a universal dash display which has a 7\" wide colour display offering great visual impact, configurable to show all the info coming from the Engine Control Unit (ECU), analogue \/ digital inputs, pre-defined math channels and the optional GPS Module.\u003c\/p\u003e\n\u003cp\u003eConnecting the MXG 1.3 Strada dash to your ECU is very simple. Sample and display dozens of channels straight from the vehicle’s ECU. This is often the quickest and easiest setup, needing only 2 cable connections to the ECU instead of multiple connections to analogue sensors. As well as the standard 14 pin wiring loom, this kit comes with an additional 23 pin loom which has pre-configured connections for all the relevant electrical items of your vehicle such as oil temperature, engine temperature, fuel level, side lights, hazards, front and rear fog, handbrake, main beam, dipped beam and left and right hand indicator. A speed sensor is also included, for connecting to this additional loom.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHigh Contrast TFT Display: The MXG 1.3 Strada has a high contrast TFT display: its visual quality being always optimised as its ambient light sensor keeps the backlight at the best brightness levels.\u003c\/li\u003e\n\u003cli\u003eMonitor data in pre-configured pages: MXG 1.3 Strada shows, together with RPM scale, all the data you need, like speed, water temperature and oil pressure, lap times and much more... you can choose the custom pages you wish - including up to four additional fields - among a wide library of page styles, defining which data to be shown, their end of scale and measure units. Swapping between the pages is easy using the push buttons.\u003c\/li\u003e\n\u003cli\u003eFlexible shift lights and alarms: The ten multi-coloured RGB shift lights can be customised to your liking, defining the RPM threshold for each single gear. The same flexibility applies to the configurable RGB alarm LEDs: you can configure them in order to turn them on\/off depending on analogue or digital inputs, ECU values, expansion values, math channels or - optionally - GPS information. You choose conditions and colours: select a solid alarm or flashing one - and the flashing frequency. It is also possible to configure an accompanying text message, and set the alarm priorities.\u003c\/li\u003e\n\u003cli\u003eCAN output: With the CAN Output you can send messages directly to an existing CAN network in order to improve the range of vehicle control possibilities.\u003c\/li\u003e\n\u003cli\u003eDigital output: MXG 1.3 Strada features a 1 amp digital output configurable in order to be activated\/deactivated depending on the value of the analogue\/digital inputs or on impulses coming from the ECU. This allows you to automatically run external systems, i.e. to switch on\/off additional lights, to activate\/de-activate a cooling fan or circulation pumps etc when a certain event happens.\u003c\/li\u003e\n\u003cli\u003eCamera inputs: Two analog camera inputs are available, to switch your display into a mirror camera, through pushbutton command or event management. Extremely useful in cars such as a Lotus Exige where the rear visibility is poor.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eAvailable with a choice of ECU CONNECTION. These being either OBDII \/ K-Line or CAN, depending on whether you want to connect to the vehicles ECU using the OBDII port, or directly to the ECU through the CAN channel.\u003c\/p\u003e","brand":"AIM","offers":[{"title":"OBDII Loom","offer_id":47167462605096,"sku":"AIM-MXG-IVA-OBD","price":1746.0,"currency_code":"GBP","in_stock":true},{"title":"CAN ECU Loom","offer_id":47167462670632,"sku":"AIM-MXG-IVA-CAN","price":1746.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/5767\/7352\/files\/aim-mxg-strada-1-2-iva-compliant-plug-play-digital-dash-display-obdii-loom-displays-780.webp?v=1745034905"},{"product_id":"aim-mxs-strada-light-non-logging-digital-dash-display","title":"AIM MXS Strada Light NON Logging Digital Dash Display","description":"\u003cp\u003eThe AIM Motorsport MXS 1.3 Strada Light dash is a cost effective option for those looking for all the great features of the MXS 1.3 but only require CAN ECU connection and 4 analogue inputs as opposed to the 8 inputs found on the standard MXS 1.3. The new generation MXS 1.3 Strada Light dash has a 5\" colour TFT display with great visual impact, configurable to show all the info coming from the Engine Control Unit (ECU), analogue \/ digital inputs, pre-defined math channels and the optional GPS Module.\u003c\/p\u003e\n\u003cp\u003eConnecting the MXS 1.3 Strada Light dash to your ECU (standard or racing) is very simple. Sample and display dozens of channels straight from the vehicle’s ECU. This is often the quickest and easiest setup, needing only a pair of cable connections to the ECU instead of multiple connections to analogue sensors. The sampled data depends on the actual ECU but typically includes RPM, throttle position (TPS), oil \/ air \/ water temperature, oil pressure, battery voltage, speed, gear, lambda value (air \/ fuel ratio). The list of available ECU drivers (1000+) is constantly being updated and upgraded.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHigh Contrast TFT Display: The MXS 1.3 Strada Light has a 5\" wide high contrast TFT display: its visual quality being always optimised as its ambient light sensor keeps the backlight at the best brightness levels.\u003c\/li\u003e\n\u003cli\u003eMonitor data in pre-configured pages: MXS 1.3 Strada Light shows, together with RPM scale, all the data you need, like speed, water temperature and oil pressure, lap times and much more... you can choose the custom pages you wish - including up to four additional fields - among a wide library of page styles, defining which data to be shown, their end of scale and measure units. Swapping between the pages is easy using the push buttons.\u003c\/li\u003e\n\u003cli\u003eFlexible shift lights and alarms: The ten multi-coloured RGB shift lights can be customised to your liking, defining the RPM threshold for each single gear. The same flexibility applies to the configurable RGB alarm LEDs: you can configure them in order to turn them on\/off depending on analogue or digital inputs, ECU values, expansion values, math channels or - optionally - GPS information. You choose conditions and colours: select a solid alarm or flashing one - and the flashing frequency. It is also possible to configure an accompanying text message, and set the alarm priorities.\u003c\/li\u003e\n\u003cli\u003eCAN output: With the CAN Output you can send messages directly to an existing CAN network in order to improve the range of vehicle control possibilities.\u003c\/li\u003e\n\u003cli\u003eCamera inputs: Two analog camera inputs are available, to switch your display into a mirror camera, through pushbutton command or event management. Extremely useful in cars such as a Lotus Exige where the rear visibility is poor.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThis MXS 1.3 Strada Light Dash is supplied with a 23 pin AMP connector and harness with an option to have a harness with an additional 4 x analogue binder connections for applications where additional channels are required.\u003c\/p\u003e\n\u003cp\u003eECU connection is achieved via the plug in harness directly to the ECU through the vehicles CAN channel.\u003c\/p\u003e\n\u003cp\u003eAvailable in two VERSION's, the “Street Icon” version is the perfect complement for conventional road use - exhibiting a wide-range of standard vehicle icons such as fuel, oil pressure and water temperate. The “Race Icon” version is focused on track\/competition driving, with the display of non-specific warning LEDs that can be configured using the powerful RaceStudio software (free download - to ensure latest version). Both versions include an odometer and trip meter.\u003c\/p\u003e\n\u003cp\u003eA modular system: Using the built-in CAN bus you can add optional expansion modules to visualise additional information:\u003c\/p\u003e","brand":"AIM","offers":[{"title":"Race Icons with 23 Pin CAN Standard Loom","offer_id":47167463227688,"sku":"AIM-MXS-S-L","price":1062.0,"currency_code":"GBP","in_stock":true},{"title":"Race Icons with Full 23 Pin Loom Can + Analog","offer_id":47167463260456,"sku":"AIM-MXS-S-L-A","price":1086.0,"currency_code":"GBP","in_stock":true},{"title":"Road Icons with 23 Pin CAN Standard Loom","offer_id":47167463293224,"sku":"AIM-MXS-S-I-L","price":1062.0,"currency_code":"GBP","in_stock":true},{"title":"Road Icons with Full 23 Pin Loom Can + Analog","offer_id":47167463325992,"sku":"AIM-MXS-S-I-L-A","price":1086.0,"currency_code":"GBP","in_stock":true},{"title":"23 Pin CAN Standard Loom Only","offer_id":47167463391528,"sku":"AIM-MX-S-L-L","price":102.0,"currency_code":"GBP","in_stock":true},{"title":"23 Pin Full Analog \u0026 CAN Loom Only","offer_id":47167463424296,"sku":"AIM-MX-S-L-AN-L","price":126.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/5767\/7352\/files\/aim-mxs-strada-light-non-logging-digital-dash-display-race-icons-with-23-pin-can-standard-loom-displays-264.webp?v=1749035525"},{"product_id":"aim-mxs-1-3-strada-5-non-logging-digital-dash-display","title":"AIM MXS 1.3 Strada 5\" NON Logging Digital Dash Display","description":"\u003cp\u003eThe AIM MXS 1.3 Strada dash is the evolution of the hugely successful MXL Strada dash display, one of the most widely used dashes on tracks and streets all over the world. The new generation MXS 1.3 Strada dash has a 5\" colour TFT display with great visual impact, configurable to show all the info coming from the Engine Control Unit (ECU), analogue \/ digital inputs, pre-defined math channels and the optional GPS Module.\u003c\/p\u003e\n\u003cp\u003eConnecting the MXS 1.3 Strada dash to your ECU (standard or racing) is very simple. Sample and display dozens of channels straight from the vehicle’s ECU. This is often the quickest and easiest setup, needing only 2 cable connections to the ECU instead of multiple connections to analogue sensors. The sampled data depends on the actual ECU but typically includes RPM, throttle position (TPS), oil \/ air \/ water temperature, oil pressure, battery voltage, speed, gear, lambda value (air \/ fuel ratio). The list of available ECU drivers (1000+) is constantly being updated and upgraded.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHigh Contrast TFT Display: The MXS 1.3 Strada has a 5\" wide high contrast TFT display: its visual quality being always optimised as its ambient light sensor keeps the backlight at the best brightness levels.\u003c\/li\u003e\n\u003cli\u003eMonitor data in pre-configured pages: MXS 1.3 Strada shows, together with RPM scale, all the data you need, like speed, water temperature and oil pressure, lap times and much more... you can choose the custom pages you wish - including up to four additional fields - among a wide library of page styles, defining which data to be shown, their end of scale and measure units. Swapping between the pages is easy using the push buttons.\u003c\/li\u003e\n\u003cli\u003eFlexible shift lights and alarms: The ten multi-coloured RGB shift lights can be customised to your liking, defining the RPM threshold for each single gear. The same flexibility applies to the configurable RGB alarm LEDs: you can configure them in order to turn them on\/off depending on analogue or digital inputs, ECU values, expansion values, math channels or - optionally - GPS information. You choose conditions and colours: select a solid alarm or flashing one - and the flashing frequency. It is also possible to configure an accompanying text message, and set the alarm priorities.\u003c\/li\u003e\n\u003cli\u003eCAN output: With the CAN Output you can send messages directly to an existing CAN network in order to improve the range of vehicle control possibilities.\u003c\/li\u003e\n\u003cli\u003eDigital output: MXS 1.3 Strada features a 1 amp digital output configurable in order to be activated\/deactivated depending on the value of the analogue\/digital inputs or on impulses coming from the ECU. This allows you to automatically run external systems, i.e. to switch on\/off additional lights, to activate\/de-activate a cooling fan or circulation pumps etc when a certain event happens.\u003c\/li\u003e\n\u003cli\u003eCamera inputs: Two analog camera inputs are available, to switch your display into a mirror camera, through pushbutton command or event management. Extremely useful in cars such as a Lotus Exige where the rear visibility is poor.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eEach version is available with a choice of ECU CONNECTION. These being either OBDII \/ K-Line or CAN, depending on whether you want to connect to the vehicles ECU using the OBDII port, or directly to the ECU through the CAN channel.\u003c\/p\u003e\n\u003cp\u003eAvailable in two VERSION's, the “Street Icon” version is the perfect complement for conventional road use - exhibiting a wide-range of standard vehicle icons such as fuel, oil pressure and water temperate. The “Race Icon” version is focused on track\/competition driving, with the display of non-specific warning LEDs that can be configured using the powerful RaceStudio software (free download - to ensure latest version). Both versions include an odometer and trip meter.\u003c\/p\u003e","brand":"AIM","offers":[{"title":"Standard Icons With CAN ECU Loom","offer_id":47167463555368,"sku":"MXS-S-CAN","price":1236.0,"currency_code":"GBP","in_stock":true},{"title":"Standard Icons With OBDII Loom","offer_id":47167463588136,"sku":"AIM-MXS-S-OBDII","price":1236.0,"currency_code":"GBP","in_stock":true},{"title":"Road Icons With CAN ECU Loom","offer_id":47167463620904,"sku":"MXS-S-I-CAN","price":1236.0,"currency_code":"GBP","in_stock":true},{"title":"Road Icons With OBDII Loom","offer_id":47167463653672,"sku":"AIM-MXS-S-I-OBDII","price":1236.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/5767\/7352\/files\/aim-mxs-1-3-strada-5-non-logging-digital-dash-display-standard-icons-with-can-ecu-loom-displays-993.webp?v=1745034957"},{"product_id":"aim-mxp-1-3-strada-6-non-logging-digital-dash-display","title":"AIM MXP 1.3 Strada 6\" NON Logging Digital Dash Display","description":"\u003cp\u003eThe Aim MXP Strada Dash Display Standard Icons offers 50% more display area than the 5'' MXS display, in a similar dimension. The dash logger has an integrated shift array, configurable multicolor alarms, drag and drop multi page configuration, Wi-Fi and USB connectivity, GPS Module, inertial platform, analog and digital inputs, digital outputs, Motorsport connectors, 4 GB of internal memory, 1,000Hz per channel sampling and support for over 1,000 ECU connections.\u003c\/p\u003e\n\u003cp\u003eMXP Strada samples data coming from your ECU, the GPS Module, the 9 axis inertial platform (accelerometer, gyro and magnetometer), 8 fully configurable analog inputs, 6 digital inputs, predefined math channels and second CAN. Performance and data acquired can also be incremented adding up to eight expansion modules.\u003c\/p\u003e\n\u003cp\u003eAim MXP features a high contrast TFT display: its visual quality is always optimal as its ambient light sensor keeps the back light at the best brightness levels. The dash is of course available also in the “Street Icons” version (fuel, oil, water temp etc.)\u003c\/p\u003e\n\u003cp\u003eMXP features five configurable RGB alarm LED's. You choose the conditions, you choose the colours. Select a solid alarm or flashing one - and the flashing frequency, choose to have an accompanying text message, and set the alarm priorities. Select then the street icons you need among the wide list you will find in “Race Studio 3 – Icons Management” and set them up the way you prefer or according with your needs. Any of them is fully configurable and if this shouldn’t be enough, you will be able to upload and set up your own customised icons.\u003c\/p\u003e\n\u003cp\u003eMXP features two digital outputs. The two digital outputs (Dout) are LOW SIDE type (switch to ground): they can be configured in order to be turned on\/off depending on the value of the analog or digital inputs. They permit to automatically run external systems, i.e. to switch on\/off additional lights, to activate\/de-activate a cooling fan or circulation pumps, etc. when a certain event happens.\u003c\/p\u003e\n\u003cp\u003eTwo analog camera inputs are available, to swap your display into a mirror camera, through pushbutton command or event management.\u003c\/p\u003e\n\u003cp\u003eChoose from a host of advanced multicoloured RGB shift light patterns that can be customised as you like and also for each unique gear when required.\u003c\/p\u003e","brand":"AIM","offers":[{"title":"Standard Icons With Can ECU Loom","offer_id":47167463883048,"sku":"MXP-S-CAN","price":1338.0,"currency_code":"GBP","in_stock":true},{"title":"Standard Icons With OBDII Loom","offer_id":47167463915816,"sku":"AIM-MXP-S-OBDII","price":1338.0,"currency_code":"GBP","in_stock":true},{"title":"Road Icons With Can ECU Loom","offer_id":47167463948584,"sku":"MXP-S-I-CAN","price":1338.0,"currency_code":"GBP","in_stock":true},{"title":"Road Icons With OBDII Loom","offer_id":47167463981352,"sku":"AIM-MXP-S-I-OBDII","price":1338.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/5767\/7352\/files\/aim-mxp-1-3-strada-6-non-logging-digital-dash-display-standard-icons-with-can-ecu-loom-displays-455.webp?v=1745034919"},{"product_id":"aim-mxg-1-3-strada-7-non-logging-digital-dash-display","title":"AIM MXG 1.3 Strada 7\" NON Logging Digital Dash Display","description":"\u003cp\u003eThe MXG 1.3 Strada features a 7\" wide colour dash display offering great visual impact, and configurable to show data coming from your vehicles ECU.\u003c\/p\u003e\n\u003ch4\u003eKey Features :\u003c\/h4\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e7\" TFT display\u003c\/td\u003e\n\u003ctd\u003e8 alarm RGB LEDs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e10 shift light RGB LEDs\u003c\/td\u003e\n\u003ctd\u003e8 analogue inputs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCAN output\u003c\/td\u003e\n\u003ctd\u003eConfigure data\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eAiM MXG 1.3 Strada 7\" TFT Dash Display with Road Icons\u003c\/h3\u003e\n\u003cp\u003eThe MXG 1.3 Strada features a 7\" wide colour TFT display, offering a great visual impact. It is configurable to show data coming from the ECU. Eight analogue inputs, 6 digital inputs, pre-defined math channels, a second CAN and an optional GPS Module.\u003c\/p\u003e\n\u003cp\u003eThe MXG 1.3 Strada is available with a choice of connection. Choose either the OBDII or K-Line CAN, depending on whether you want to connect to the vehicles ECU or OBDII port or directly to the ECU through the CAN channel.\u003c\/p\u003e\n\u003ch4\u003eEasy Connection\u003c\/h4\u003e\n\u003cp\u003eConnecting the MXG 1.3 Strada dash to your ECU is simple. You can sample and display dozens of channels straight from the vehicles ECU. This is usually the quickest and easiest setup, needing only 2 cable connections to the ECU instead of multiple connections to analogue sensors. The sampled data depends on the actual ECU, but will typically include RPM, throttle position, (TPS), oil, air, water temperature, oil pressure, battery voltage, speed, gear, lambda value (air\/fuel ratio). The list of available ECU drivers is 1000+ and is constantly being updated and upgraded.\u003c\/p\u003e\n\u003ch4\u003eDigital Outputs\u003c\/h4\u003e\n\u003cp\u003eThe MXG 1.3 features two digital outputs. The two digital outputs (Dout) are LOW SIDE type (switch to ground). They can be configured in order to be turned on\/off depending on the value of the analogue or digital inputs. They permit to automatically run external systems. For example, switch on\/off additional lights, to activate\/deactivate a cooling fan or circulation pumps when a certain event happens.\u003c\/p\u003e\n\u003cp\u003eWith CAN Output you can send messages directly to an existing CAN network to improve the range of vehicle control possibilities.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003eDisplay\u003c\/h3\u003e\n\u003cp\u003eThe MXG 1.3 Strada has a 7\" high contrast TFT display. The visual quality is kept optimised by the ambient light sensor which keeps he backlight to its best brightness levels, so as to avoid the screen dazzling you while driving in the dark.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003ePre-configured Pages\u003c\/h3\u003e\n\u003cp\u003eThe MXG 1.3 Strada shows the RPM scale and all the data you need, like speed, water temperature and oil pressure, lap times and much more. You can custom pages to suit your requirements, including up to four additional fields. Define what data is shown with the end of scale and measure units. Swapping between the pages is easy just use the pushbuttons.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003eFlexible Shift Light \u0026amp; Alarms\u003c\/h3\u003e\n\u003cp\u003eThe ten multi-coloured RGB shift lights can be customized to your liking, defining the RPM threshold on analogue or digital inputs, ECU values, expansion values, math channels or optional GPS option. You can choose the conditions and colours, select a solid arm or flashing one, also the flashing frequency. You can also configure an accompanying text message and set the alarm priorities.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003eCamera Inputs\u003c\/h3\u003e\n\u003cp\u003eTwo analogue camera inputs are available, to switch your display into a mirror camera, through a pushbutton command or event management. The camera is sold separately.\u003c\/p\u003e","brand":"AIM","offers":[{"title":"Standard Icons With Can ECU Loom","offer_id":47167464407336,"sku":"MXG-S-CAN","price":1542.0,"currency_code":"GBP","in_stock":true},{"title":"Standard Icons With OBDII Loom","offer_id":47167464440104,"sku":"AIM-MXG-S-OBDII","price":1542.0,"currency_code":"GBP","in_stock":true},{"title":"Road Icons With Can ECU Loom","offer_id":47167464472872,"sku":"AIM-MXG-S-I-CAN","price":1542.0,"currency_code":"GBP","in_stock":true},{"title":"Road Icons With OBDII Loom","offer_id":47167464505640,"sku":"AIM-MXG-S-I-OBDII","price":1542.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/5767\/7352\/files\/aim-mxg-1-3-strada-7-non-logging-digital-dash-display-standard-icons-with-can-ecu-loom-displays-143.webp?v=1745034896"},{"product_id":"aim-mxt-1-3-strada-10-non-logging-digital-dash-display","title":"AIM MXT 1.3 Strada 10\" NON Logging Digital Dash Display","description":"\u003cp\u003eThe MXT 1.3 Strada features a 10\" wide colour dash display offering great visual impact and is configurable to show data coming from your vehicle's ECU.\u003c\/p\u003e\n\u003cp\u003eKey Features:\u003c\/p\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003e10\" TFT display\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e6 alarm RGB LEDs\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003e10 shift light RGB LEDs\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e8 analogue inputs\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003eCAN output\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003eConfigure data\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cstrong\u003eAiM MXT 1.3 Strada 10\" TFT Dash Display with Road Icons\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe MXT 1.3 Strada has an integrated shift array, configurable multicolour alarms, drag and drop multi-page configuration, Wi-Fi and USB connectivity, GPS09 Module, analogue and digital inputs, digital outputs, motorsport connectors, 4GB of internal memory, 1000Hz per channel sampling and support for over 1000 ECU connections.\u003c\/p\u003e\n\u003cp\u003eMXT 1.3 Strada samples data coming from your ECU, the GPS09 Module, 8 fully configurable analogue inputs, 6 digital inputs, predefined math channels and a second CAN. Performance and data acquired can also be incremented adding up to eight expansion modules.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFreely Configurable Pages\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYou can define up to 8 custom pages, choosing among a selection of page styles, defining which data to be shown, their end of scale and measure units. Swapping between pages can be managed pushing one or two pushbuttons.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cstrong\u003eDisplay\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA high-contrast 10\" TFT display identifies MXT 1.3 Strada at first glance. An ambient light sensor keeps the backlight at optimum brightness levels.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cstrong\u003eFlexible Alarms \u0026amp; Custom Street Icons\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eMXT 1.3 features five configurable RGB alarm LEDs: you choose the conditions, and you choose the colours. Select a solid alarm or flashing one - and the flashing frequency, choose to have an accompanying text message, and set the alarm priorities. Furthermore, you can select the street icons you need from the wide list you will find in \"Race Studio 3 - Icons Management\" and set them up the way you prefer, or according to your needs. You will also be able to upload and set up your own customised icons.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cstrong\u003eTwo Digital Outputs\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eMXT 1.3 Strada features two digital outputs. The two digital outputs (Dout) are LOW SIDE type (switch to ground): they can be configured to be turned on\/off depending on the value of the analogue or digital inputs.\u003cbr\u003eThey permit to automatically run external systems, i.e. to switch on\/off additional lights, to activate\/de-activate a cooling fan or circulation pumps, etc. when a certain event happens.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cstrong\u003eCamera Inputs \u0026amp; Mirror Camera\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eTwo analogue camera inputs are available to swap your display into a mirror camera, through a pushbutton command or event management.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cstrong\u003eIntegrated Shift Light Array\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eChoose from a host of advanced multicoloured RGB shift light patterns that can be customised as you like, and for each unique gear when required.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cstrong\u003eExpand Your System\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eUsing the built-in CAN bus, you can add expansion modules to the MXT 1.3 Strada to increment the performance and the data acquired:\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eGPS09 Module\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThanks to GPS09 Module (included in the kit) and its Race Studio 3 software, you can immediately get lap times and all data needed for engine tuning as well as for improving driving technique.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eChannel Expansion\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIt permits to add 4 0-5Volt analog channels for pressure, temperature sensors and potentiometers. Two of these channels can be configured to receive digital inputs like wheel speed.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTC Hub\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIt adds 4 K thermocouples.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eLCU-One CAN\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWide band Lambda controller LCU-One, with Bosch LSU 4.9 probe, providing all Air\/Fuel data and lambda value, allows to perfectly tune the carburetion.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMemory Module\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Memory Module is a small SD Card holder that can be connected via CAN bus to your AiM Strada logger in order to record the data during your tests.\u003c\/p\u003e","brand":"AIM","offers":[{"title":"Standard Icons With Can ECU Loom","offer_id":47167464702248,"sku":"AIM-MXT-S-CAN","price":1746.0,"currency_code":"GBP","in_stock":true},{"title":"Standard Icons With OBDII Loom","offer_id":47167464735016,"sku":"AIM-MXT-S-OBDII","price":1746.0,"currency_code":"GBP","in_stock":true},{"title":"Road Icons With Can ECU Loom","offer_id":47167464767784,"sku":"AIM-MXT-S-I-CAN","price":1746.0,"currency_code":"GBP","in_stock":true},{"title":"Road Icons With OBDII Loom","offer_id":47167464800552,"sku":"AIM-MXT-S-I-OBDII","price":1746.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/5767\/7352\/files\/aim-mxt-1-3-strada-10-non-logging-digital-dash-display-standard-icons-with-can-ecu-loom-displays-569.webp?v=1745034991"},{"product_id":"aim-infrared-belt-temperature-display","title":"AIM Infrared Belt Temperature Display","description":"\u003cp\u003eThe Infrared Belt Temperature System reads the belt temperature and battery voltage.\u003c\/p\u003e\n\u003ch3\u003e\u003cstrong\u003eInfrared Belt Temperature System\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003eThe AiM infrared belt temperature system has been designed for you to choose between a single point sensor that provides accurate belt temperature readings to the gauge display.\u003cbr\u003e\u003cbr\u003eDesigned for the off-road circuit, UTV Racing is a demanding activity which can stress every component of the vehicle. \u003c\/p\u003e\n\u003cp\u003eThe single point temperature sensor shows the average temperature of the controlled area and the multi-point temperature sensor will divide the area into 16 small portions and send the values every tenth of a second to the gauge via the CAN communication line.\u003c\/p\u003e\n\u003cp\u003eThis information is displayed on the gauge with colours indicating different temperatures.\u003c\/p\u003e\n\u003ch3\u003e\u003cstrong\u003eWhat the Gauge Shows\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003eThe temperature value is constantly shown and recorded in the internal memory every ten seconds, in order to be evaluated after the test.\u003c\/p\u003e\n\u003cp\u003eThe external supply voltage.\u003c\/p\u003e\n\u003ch3\u003e\u003cstrong\u003eTemperature, No more fear\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003eIt is possible to set two temperature thresholds. One for a warning, when the temperature rises above the alarm level it will display in yellow and a warning message will be seen at the top of the display. When the temperature rises above the alarm level it will display in red, a message will be seen at the top of the display and a red LED will start blinking.\u003c\/p\u003e\n\u003cp\u003eThe gauge will also read and display the external supply voltage. The voltage will generally be shown in green but like the temperature, you can set warning and alarm thresholds.\u003c\/p\u003e","brand":"AIM","offers":[{"title":"IR Belt Temperature System with 0.3M Cable","offer_id":47167465881896,"sku":"AIM-IBTS","price":534.0,"currency_code":"GBP","in_stock":true},{"title":"IR Belt Temperature System with 0.4M Cable","offer_id":47167465914664,"sku":"AIM-IBTS-4","price":534.0,"currency_code":"GBP","in_stock":true},{"title":"IR Temperature Sensor (CVT)","offer_id":47167465947432,"sku":"AIM-S-IR-SP","price":186.0,"currency_code":"GBP","in_stock":true},{"title":"Gauge Only","offer_id":47167465980200,"sku":"AIM-IBTS-G","price":354.0,"currency_code":"GBP","in_stock":true},{"title":"Bracket Only","offer_id":47167466012968,"sku":"AIM-IBTS-B","price":36.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/5767\/7352\/files\/aim-infrared-belt-temperature-display-ir-system-with-0-3m-cable-digital-displays-857.webp?v=1745034858"},{"product_id":"aim-5-mxm-data-logging-digital-dash-display","title":"AIM 5\" MXm Data Logging Digital Dash Display]","description":"\u003cp\u003eDisplay your data, improve your racing and track day experience featuring advanced data logging and data acquisition. Integrated GPS. 4GB memory. Wi-Fi connectivity. High Contrast LCD display. 5 RGB LEDs. 7 Backlight colours. Configurable display.\u003c\/p\u003e","brand":"AIM","offers":[{"title":"MXm Data Logging Dash With GPS","offer_id":47167466471720,"sku":"MXm","price":1254.0,"currency_code":"GBP","in_stock":true},{"title":"MXm Legends Car Kit","offer_id":47167466504488,"sku":"AIM-MXM-LC","price":1254.0,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/5767\/7352\/files\/aim-5-mxm-data-logging-digital-dash-display-with-gps-displays-177.webp?v=1745034693"},{"product_id":"aim-mxs-1-3-5-digital-data-logger-dash-display","title":"AIM MXS 1.3 5\" Digital Data Logger Dash Display","description":"\u003cp\u003eThe AIM MXS 1.3 Dash Logger (an evolution of the MXS) has a compact 5\" display which is fully configurable by the user and is suitable for many different motorsports categories. Designed to acquire and display data coming from your ECU, the GPS module (included in the kit), analogue\/digital inputs and predefined math channels. Performance and data acquired can also be incremented by adding up to eight expansion modules. Supplied complete with a GPS09 module, wiring harness with military-spec motorsport connectors, data lead and RaceStudio3 software (free download - to ensure latest version). All versions include an odometer and trip meter.\u003c\/p\u003e\n\u003cp\u003eThe main difference between this MXS, and the MXG or MXP dash loggers is size: a compact 5\" display for the MXS, a 6\" display for the MXP and a 7\" wide display for the MXG. This makes the 5\" MXS a better fit for compact cockpit installations where space is at a premium.\u003c\/p\u003e\n\u003cp\u003eA choice of GPS09 modules are available: 0.5, 1.3, 2 or 4m cable, or a 2 or 4m \"roof version\" with cable entry from underneath specifically designed for easy installation on covered cars.\u003c\/p\u003e\n\u003cp\u003eConnecting the MXS 1.3 dash to your ECU (standard vehicle or racing ECU) is very simple. Sample and display dozens of channels straight from the vehicle’s ECU. This is often the quickest and easiest setup, needing only a cable connection to the ECU instead of multiple connections to analogue sensors. Sampled data depends on the actual ECU but typically includes RPM, engine load, throttle position (TPS), oil\/air\/water temperature, oil pressure, battery voltage, speed, gear, lambda value (air\/fuel ratio). The list of available ECU drivers is constantly updated and upgraded and includes approximately 1000+ different ECUs, either stock or racing.\u003c\/p\u003e\n\u003cp\u003eThe MXS 1.3 also features two digital outputs. Each of them can give an output of 1 amp at 12 volts: they can be configured in order to be turned on\/off depending on the value of the analogue or digital inputs. They permit to automatically run external systems, i.e. to switch on\/off additional lights, to activate\/de-activate a cooling fan or circulation pumps, etc when a certain event happens.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHigh contrast 5\" TFT Display: fully configurable using the powerful dedicated software. Create and customise as many pages \/ displays as you wish, using different fonts and dimensions for all information received by the MXS dash logger. Swapping between pages can be managed by pushing one or two pushbuttons. An ambient light sensor keeps the backlight at optimum brightness levels.\u003c\/li\u003e\n\u003cli\u003eFlexible alarms: Six configurable RGB alarm LEDs. You choose the conditions, you choose the colours. Select a solid alarm or flashing one - and the flashing frequency, choose to have an accompanying text message, and set the alarm priorities. Integrated shift light - Choose from a host of advanced multi-coloured RGB shift light patterns that can be customised to your liking, and for each unique gear when required.\u003c\/li\u003e\n\u003cli\u003eGPS09 module (included with dash): The GPS09 Module connected via CAN makes lap time calculation and track position analysis very easy. Each MXS memory stores more than 200 world tracks start\/finish line coordinates: as soon as MXS is switched on, the GPS09 Module will locate its position, identify track-line coordinates and start immediately sampling lap and split time. If the track is not included in the database, it is always possible to add the start\/finish line coordinates to the MXS via a PC before going to the track, using the new RaceStudio3 Track Manager software. A choice of GPS09 modules are available: 1.3m (popular for motorcycles), a 4m cable, or a 2 or 4m \"roof version\" with cable entry from underneath specifically designed for easy, permanent installation on closed cockpit cars, although many customers are using these on motorcycle fairings too.\u003c\/li\u003e\n\u003cli\u003eWiFi connectivity: Configure, calibrate and download your data wirelessly over a secure 802.11 WiFi connection. Once the initial setup \/ configuration has been done using the USB cable, there is no need to use the cable again!\u003c\/li\u003e\n\u003cli\u003eCAN output: With the CAN Output you can send messages directly to an existing CAN network in order to improve the range of vehicle control possibilities\u003c\/li\u003e\n\u003cli\u003eCamera inputs: Two analog camera inputs are available, to switch your display into a mirror camera, through push button command or event management. Extremely useful in cars such as a Lotus Exige where the rear visibility is poor.\u003c\/li\u003e\n\u003cli\u003eMotorsport connections: Lightweight aluminium military-spec motorsport connectors are standard on the MXS.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"AIM","offers":[{"title":"0.5M Cable","offer_id":47167466635560,"sku":"AIM-MXS","price":2520.0,"currency_code":"GBP","in_stock":true},{"title":"1.3M Cable","offer_id":47167466668328,"sku":"AIM-MXS-1","price":2520.0,"currency_code":"GBP","in_stock":true},{"title":"2M Cable","offer_id":47167466701096,"sku":"AIM-MXS-2","price":2520.0,"currency_code":"GBP","in_stock":true},{"title":"4M Cable","offer_id":47167466733864,"sku":"AIM-MXS-4","price":2520.0,"currency_code":"GBP","in_stock":true},{"title":"Roof Version 2M Cable","offer_id":47167466766632,"sku":"AIM-MXS-CR2","price":2520.0,"currency_code":"GBP","in_stock":true},{"title":"Roof Version 4M Cable","offer_id":47167466799400,"sku":"AIM-MXS-CR4","price":2520.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/5767\/7352\/files\/aim-mxs-1-3-5-digital-data-logger-dash-display-0-5m-cable-displays-213.webp?v=1745034925"},{"product_id":"aim-mxp-1-3-6-digital-data-logger-dash-display","title":"AIM MXP 1.3 6\" Digital Data Logger Dash Display","description":"\u003cp\u003eThe AIM MXP 1.3 Dash Logger features a 6\" wide colour TFT display with great visual impact, configurable to show all the data coming from the vehicles Engine Control Unit (ECU), 8 analogue inputs, 6 digital inputs, pre-defined math channels, a second CAN and an included GPS Module. The 6\" MXP 1.3 offers 50% more display area than the 5\" MXS dash logger, in a similar dimension package making this dash suitable for both cars and motorcycles.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eGPS09 module (included with dash): The GPS09 Module connected via CAN to the MXP 1.3 makes lap time calculation and track position analysis very easy. Each MXP 1.3 memory stores more than 200 world tracks start\/finish line coordinates: as soon as MXP 1.3 is switched on, the GPS09 Module will locate its position, identify track-line coordinates and start immediately sampling lap and split time. If the track is not included in the database, it is always possible to add the start\/finish line coordinates to the MXP 1.3 via a PC before going to the track, using the new RaceStudio3 Track Manager software.\u003c\/li\u003e\n\u003cli\u003eHigh Contrast TFT Display: The MXP 1.3 dash logger has a high contrast 6\" TFT display: its visual quality being always optimised as its ambient light sensor keeps the backlight at the best brightness levels, avoiding the screen from dazzling you when it gets dark, whilst keeping it bright and visible during the day. \u003c\/li\u003e\n\u003cli\u003eMonitor data in freely-configurable pages: MXP 1.3 shows, together with RPM scale, all the data you need, like speed, water temperature and oil pressure and much much more...\u003c\/li\u003e\n\u003cli\u003eFlexible shift lights and alarms: The 10 multi-coloured RGB shift lights can be customised to your liking, defining the RPM threshold for each single gear. The same flexibility applies to the configurable RGB alarm LEDs: you can configure them in order to turn them on\/off depending on analogue or digital inputs, ECU values, expansion values, math channels or - optionally - GPS information. You choose conditions and colours: select a solid alarm or flashing one - and the flashing frequency. It is also possible to configure an accompanying text message on the display, and set the alarm priorities.\u003c\/li\u003e\n\u003cli\u003eCAN output: With the CAN Output you can send messages directly to an existing CAN network in order to improve the range of vehicle control possibilities.\u003c\/li\u003e\n\u003cli\u003eDigital output: MXP 1.3 features two digital outputs. These LOW SIDE type (switch to ground): can be configured in order to be activated\/deactivated depending on the value of the analogue\/digital inputs. This allows you to automatically run external systems, i.e. to switch on\/off additional lights or to activate\/de-activate a cooling fan or circulation pumps etc when a certain event happens.\u003c\/li\u003e\n\u003cli\u003eWiFi connectivity: Configure, calibrate and download your data wirelessly over a secure 802.11 WiFi connection. Once the initial setup \/ configuration has been done using the USB cable, there is no need to use the cable again!\u003c\/li\u003e\n\u003cli\u003eCamera inputs: Two analog camera inputs are available, to switch your display into a mirror camera, through pushbutton command or event management. Extremely useful in cars such as a Lotus Exige where the rear visibility is poor.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eConnecting the MXP 1.3 dash logger to your car\/motorcycle ECU (standard or racing) is very simple. Sample and display dozens of channels straight from the ECU. This is often the quickest and easiest setup, needing only 2 cable connections to the ECU instead of multiple connections to analogue sensors. The sampled data depends on the actual ECU but typically includes RPM, throttle position (TPS), oil \/ air \/ water temperature, oil pressure, battery voltage, speed, gear, lambda value (air \/ fuel ratio). The list of available ECU drivers (1,000+) is constantly being updated and added to.\u003c\/p\u003e","brand":"AIM","offers":[{"title":"0.5M Cable","offer_id":47167467421992,"sku":"AIM-MXP","price":2676.0,"currency_code":"GBP","in_stock":true},{"title":"1.3M Cable","offer_id":47167467454760,"sku":"AIM-MXP-1","price":2676.0,"currency_code":"GBP","in_stock":true},{"title":"2M Cable","offer_id":47167467487528,"sku":"AIM-MXP-2","price":2676.0,"currency_code":"GBP","in_stock":true},{"title":"4M Cable","offer_id":47167467520296,"sku":"AIM-MXP-4","price":2676.0,"currency_code":"GBP","in_stock":true},{"title":"Roof Version 2M Cable","offer_id":47167467585832,"sku":"AIM-MXP-CR2","price":2676.0,"currency_code":"GBP","in_stock":true},{"title":"Roof Version 4M Cable","offer_id":47167467618600,"sku":"AIM-MXP-CR4","price":2676.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/5767\/7352\/files\/aim-mxp-1-3-6-digital-data-logger-dash-display-0-5m-cable-displays-976.webp?v=1745034914"},{"product_id":"aim-mxg-1-3-7-digital-data-logger-dash-display","title":"AIM MXG 1.3 7\" Digital Data Logger Dash Display","description":"\u003cp\u003eThe AIM MXG 1.3 Dash Logger (an evolution of the MXG) has an extra wide 7\" display which is fully configurable by the user and is suitable for many different motorsports categories. Designed to acquire and display data coming from your ECU, the GPS module (included in the kit), analogue\/digital inputs and predefined math channels. Performance and data acquired can also be incremented by adding up to eight expansion modules. Supplied complete with a GPS09 module, wiring harness with military-spec motorsport connectors, data lead and RaceStudio3 software (download to ensure latest version). All versions include an odometer and trip meter.\u003c\/p\u003e\n\u003cp\u003eThe main difference between this MXG, and the MXS or MXP dash loggers are size: a compact 5\" display for the MXS, a 6\" display for the MXP model and a 7\" wide display for this MXG 1.3 dash logger, making it a better fit for wide cockpit installations.\u003c\/p\u003e\n\u003cp\u003eConnecting the MXG 1.3 dash to your ECU (standard vehicle or racing ECU) is very simple. Sample and display dozens of channels straight from the vehicle’s ECU. This is often the quickest and easiest setup, needing only a cable connection to the ECU instead of multiple connections to analogue sensors. Sampled data depends on the actual ECU but typically includes RPM, engine load, throttle position (TPS), oil\/air\/water temperature, oil pressure, battery voltage, speed, gear, lambda value (air\/fuel ratio). The list of available ECU drivers is constantly updated and upgraded and includes approximately 1000+ different ECUs, either stock or racing.\u003c\/p\u003e\n\u003cp\u003eA choice of GPS09 modules are available: 0.5, 1.3, 2 or 4m cable, or a 2 or 4m \"roof version\" with cable entry from underneath specifically designed for easy installation on covered cars, although many customers are using these on bike fairings too!\u003c\/p\u003e\n\u003cp\u003eThe MXG 1.3 also features two digital outputs. Each of them can give an output of 1 amp at 12 volts: they can be configured in order to be turned on\/off depending on the value of the analogue or digital inputs. They permit to automatically run external systems, i.e. to switch on\/off additional lights, to activate\/de-activate a cooling fan or circulation pumps, etc when a certain event happens.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDisplay: Featuring a high contrast 7” TFT display which is fully configurable using the powerful dedicated software. Create and customise as many pages \/ displays as you wish, using different fonts and dimensions for all information received by the MXG 1.3 dash logger. Swapping between pages can be managed by pushing one or two push buttons. An ambient light sensor keeps the backlight at optimum brightness levels.\u003c\/li\u003e\n\u003cli\u003eFlexible alarms: Eight configurable RGB alarm LEDs. You choose the conditions, you choose the colours. Select a solid alarm or flashing one - and the flashing frequency, choose to have an accompanying text message, and set the alarm priorities. Integrated shift light - Choose from a host of advanced multi-coloured RGB shift light patterns that can be customised to your liking, and for each unique gear when required.\u003c\/li\u003e\n\u003cli\u003eGPS09 module (included with dash): The GPS09 Module connected via CAN to the MXG makes lap time calculation and track position analysis very easy. Each MXG memory stores more than 200 world tracks start\/finish line coordinates: as soon as MXG is switched on, the GPS09 Module will locate its position, identify track-line coordinates and start immediately sampling lap and split time. If the track is not included in the database, it is always possible to add the start\/finish line coordinates to the MXG via a PC before going to the track, using the new RaceStudio3 Track Manager software.\u003c\/li\u003e\n\u003cli\u003eCAN output: With the CAN Output you can send messages directly to an existing CAN network in order to improve the range of vehicle control possibilities\u003c\/li\u003e\n\u003cli\u003eWiFi connectivity: Configure, calibrate and download your data wirelessly over a secure 802.11 WiFi connection. Once the initial setup \/ configuration has been done using the USB cable, there is no need to use the cable again!\u003c\/li\u003e\n\u003cli\u003eCamera inputs: Two analog camera inputs are available, to switch your display into a mirror camera, through pushbutton command or event management. Extremely useful in cars such as a Lotus Exige where the rear visibility is poor.\u003c\/li\u003e\n\u003cli\u003eMotorsport connections: Lightweight aluminium military-spec motorsport connectors are standard on the MXG 1.3.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"AIM","offers":[{"title":"0.5M Cable","offer_id":47167467979048,"sku":"AIM-MXG","price":2880.0,"currency_code":"GBP","in_stock":true},{"title":"1.3M Cable","offer_id":47167468011816,"sku":"AIM-MXG-1","price":2880.0,"currency_code":"GBP","in_stock":true},{"title":"2M Cable","offer_id":47167468044584,"sku":"AIM-MXG-2","price":2880.0,"currency_code":"GBP","in_stock":true},{"title":"4M Cable","offer_id":47167468077352,"sku":"AIM-MXG-4","price":2880.0,"currency_code":"GBP","in_stock":true},{"title":"Roof Version 2M Cable","offer_id":47167468110120,"sku":"AIM-MXG-CR2","price":2880.0,"currency_code":"GBP","in_stock":true},{"title":"Roof Version 4M Cable","offer_id":47167468142888,"sku":"AIM-MXG-CR4","price":2880.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/5767\/7352\/files\/aim-mxg-1-3-7-digital-data-logger-dash-display-0-5m-cable-displays-282.webp?v=1745034286"},{"product_id":"aim-mxt-1-3-10-digital-data-logger-dash-display","title":"AIM MXT 1.3 10\" Digital Data Logger Dash Display","description":"\u003cp\u003eThe MXT 1.3 Strada features a 10\" wide colour dash display offering great visual impact and is configurable to show data coming from your vehicle's ECU.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKey Features :\u003c\/strong\u003e\u003c\/p\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003e10\" TFT display\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e6 alarm RGB LEDs\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003e10 shift light RGB LEDs\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e8 analogue inputs\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003eCAN output\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003eConfigure data\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003eThe MXT 1.3 Strada has an integrated shift array, configurable multicolour alarms, drag and drop multi-page configuration, Wi-Fi and USB connectivity, GPS09 Module, analogue and digital inputs, digital outputs, motorsport connectors, 4GB of internal memory, 1000Hz per channel sampling and support for over 1000 ECU connections.\u003c\/p\u003e\n\u003cp\u003eMXT 1.3 Strada samples data coming from your ECU, the GPS09 Module, 8 fully configurable analogue inputs, 6 digital inputs, predefined math channels and a second CAN. Performance and data acquired can also be incremented adding up to eight expansion modules.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFreely Configurable Pages\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYou can define up to 8 custom pages, choosing among a selection of page styles, defining which data to be shown, their end of scale and measure units. Swapping between pages can be managed pushing one or two pushbuttons.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cstrong\u003eDisplay\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA high-contrast 10\" TFT display identifies MXT 1.3 Strada at first glance. An ambient light sensor keeps the backlight at optimum brightness levels.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cstrong\u003eFlexible Alarms \u0026amp; Custom Street Icons\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eMXT 1.3 features five configurable RGB alarm LEDs: you choose the conditions, and you choose the colours. Select a solid alarm or flashing one - and the flashing frequency, choose to have an accompanying text message, and set the alarm priorities. Furthermore, you can select the street icons you need from the wide list you will find in \"Race Studio 3 - Icons Management\" and set them up the way you prefer, or according to your needs. You will also be able to upload and set up your own customised icons.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cstrong\u003eTwo Digital Outputs\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eMXT 1.3 Strada features two digital outputs. The two digital outputs (Dout) are LOW SIDE type (switch to ground): they can be configured to be turned on\/off depending on the value of the analogue or digital inputs.\u003cbr\u003eThey permit to automatically run external systems, i.e. to switch on\/off additional lights, to activate\/de-activate a cooling fan or circulation pumps, etc. when a certain event happens.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cstrong\u003eCamera Inputs \u0026amp; Mirror Camera\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eTwo analogue camera inputs are available to swap your display into a mirror camera, through a pushbutton command or event management.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cstrong\u003eIntegrated Shift Light Array\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eChoose from a host of advanced multicoloured RGB shift light patterns that can be customised as you like, and for each unique gear when required.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cstrong\u003eExpand Your System\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eUsing the built-in CAN bus, you can add expansion modules to the MXT 1.3 Strada to increment the performance and the data acquired:\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eGPS09 Module\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThanks to GPS09 Module (included in the kit) and its Race Studio 3 software, you can immediately get lap times and all data needed for engine tuning as well as for improving driving technique.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eChannel Expansion\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIt permits to add 4 0-5Volt analog channels for pressure, temperature sensors and potentiometers. Two of these channels can be configured to receive digital inputs like wheel speed.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTC Hub\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIt adds 4 K thermocouples.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eLCU-One CAN\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWide band Lambda controller LCU-One, with Bosch LSU 4.9 probe, providing all Air\/Fuel data and lambda value, allows to perfectly tune the carburetion.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMemory Module\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Memory Module is a small SD Card holder that can be connected via CAN bus to your AiM Strada logger in order to record the data during your tests.\u003c\/p\u003e","brand":"AIM","offers":[{"title":"0.5M Cable","offer_id":47167468175656,"sku":"AIM-MXT","price":3090.0,"currency_code":"GBP","in_stock":true},{"title":"1.3M Cable","offer_id":47167468241192,"sku":"AIM-MXT-1","price":3090.0,"currency_code":"GBP","in_stock":true},{"title":"2M Cable","offer_id":47167468273960,"sku":"AIM-MXT-2","price":3090.0,"currency_code":"GBP","in_stock":true},{"title":"4M Cable","offer_id":47167468306728,"sku":"AIM-MXT-4","price":3090.0,"currency_code":"GBP","in_stock":true},{"title":"Roof Version 2M Cable","offer_id":47167468339496,"sku":"AIM-MXT-CR2","price":3090.0,"currency_code":"GBP","in_stock":true},{"title":"Roof Version 4M Cable","offer_id":47167468372264,"sku":"AIM-MXT-CR4","price":3090.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/5767\/7352\/files\/aim-mxt-1-3-10-digital-data-logger-dash-display-0-5m-cable-displays-985.webp?v=1745034377"},{"product_id":"aim-mxg-mxs-mxp-mxl2-solo-2-dash-bracket","title":"AIM MXG MXS MXP MXL2 Solo 2 Dash Bracket","description":"\u003cp\u003eMount your AIM dash securely with these great range of dash display brackets.\u003c\/p\u003e","brand":"AIM","offers":[{"title":"MXG Dash Bracket","offer_id":47167469814056,"sku":"UP-MXG","price":24.0,"currency_code":"GBP","in_stock":true},{"title":"MXS, MXP, MXL2 Dash Bracket","offer_id":47167469846824,"sku":"UP-MXL","price":24.0,"currency_code":"GBP","in_stock":true},{"title":"90 Degree Bolt-on For Dash Bracket","offer_id":47167469912360,"sku":"UP-90-TAB","price":9.6,"currency_code":"GBP","in_stock":true},{"title":"Universal Dash Bracket","offer_id":47167470141736,"sku":"UP-UM","price":10.8,"currency_code":"GBP","in_stock":true},{"title":"Hub For Universal Steering Wheel Bracket","offer_id":47167470207272,"sku":"UP-CH","price":14.4,"currency_code":"GBP","in_stock":true},{"title":"Solo2 Bracket","offer_id":47167470240040,"sku":"UP-SOLO2","price":20.4,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/5767\/7352\/files\/aim-mxg-mxs-mxp-mxl2-solo-2-dash-bracket-digital-displays-913.webp?v=1745034292"},{"product_id":"aim-mx2e-plug-play-dash-logger-kit-lotus-elise-exige-04-22","title":"AIM MX2E Plug \u0026 Play Dash Logger Kit Lotus Elise Exige 04-22","description":"\u003cdiv\u003eHigh Contrast 6\" TFT display. Wi-fi connectivity. Integrated GPS module. CAN bus ECU interface. 16 integrated LEDs. 14 digital switch inputs. Optional Rear Camera Input.\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cdiv\u003eThis kit has been specifically designed for the Lotus Elise and Exige 2004-2020 models (fitted with a Toyota engine). The dash features a 6\" high contrast, high-quality TFT display with 18 integrated LEDs, and is mounted in a bespoke instrument cluster.\u003c\/div\u003e\n\u003cdiv\u003e2004-2007 models will require an adaptor harness, please select option when ordering.\u003c\/div\u003e\n\u003cdiv\u003eThe cluster has been designed to be easy to install and includes housing for the included GPS Module. With four integrated buttons (two on each side) built into the sides will enable scrolling through the pages\/menus. When switched on the MX2E will automatically recognize the venue and start to download the start\/finish coordinates and calculates lap times when these coordinates are crossed. We already have over 4,000 tracks on our database, but if the track you are at is not on the database it is possible to create and load it on the database using our Race Studio 3 Software.\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cstrong\u003ePlease Note:\u003c\/strong\u003e If you want your current mileage added to the dash, please state in the notes section of the order what you require (miles or km). If you prefer speaking to one of our AiM specialists don't hesitate to get in touch.\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cdiv\u003eThe MX2E dash has two types of display. You can choose between the road or track and even choose between analogue or digital. There are 16 display layouts to choose from, with four different colour options. It is supplied with a GPS Module which will provide accurate GPS speed, lap timing and track mapping. You can view the track data directly from the dash or more in-depth analysis can be viewed using our Race Studio 3 Software. This will enable you to understand graphs, histograms and tables to help you make comparisons to different laps and sessions on track days.\u003c\/div\u003e\n\u003cdiv\u003eThere is a wide range of icons available on the display, rear fog light, position lights on, ABS on\/malfunctioning, ABS off, hand brake, engine off, pressure low, seat belt not fastened, airbag off - all of these icons offer a quick look source of information whilst you are driving.\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cdiv\u003eThe MX2E features 18 solid LEDs that offer the following information left or right direction, shift light made up of 10 LEDs, hand brake on, fuel level low, immobiliser on, position lights on, high beam on and engine problems.\u003c\/div\u003e\n\u003cdiv\u003e18 integrated LEDs, (10 shift lights, 6 status information LEDs, 2 turn indicators.\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"AIM","offers":[{"title":"Dash Display","offer_id":47167470731560,"sku":"AIM-MX2E","price":1542.0,"currency_code":"GBP","in_stock":true},{"title":"Adapter harness for Lotus Elise\/Exige 2004-2007","offer_id":47167470764328,"sku":"AIM-MX2E-AH","price":72.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/5767\/7352\/files\/aim-mx2e-plug-play-dash-logger-kit-lotus-elise-exige-04-22-display-digital-displays-105.webp?v=1745034891"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0715\/5767\/7352\/collections\/LOGGERS_1.jpg?v=1706550890","url":"https:\/\/www.tegiwa.com\/collections\/aim-loggers-displays.oembed","provider":"Tegiwa","version":"1.0","type":"link"}